Apron made of plastic for the kitchen dimensions. Color and design - how to choose? Installation of wall panels for the kitchen

Plastic kitchen apron perfect solution in terms of value for money, quality and ease of installation. Let's see what this inexpensive material loses to tiles, porcelain stoneware, glass and other facing materials, and in what - it is quite competitive.

What types are there?

In this material, we will consider three main types of plastic apron for the kitchen:

1. ABS sheets - usually sold in the format 3000x600x1.5, as well as 2000x600x1.5 and decorated with photo printing. You can order a photo printing design yourself by choosing a picture from the catalog or by preparing your own photo or image in high quality.

1. PVC panels - panels for an apron are produced with a width of 15-50 cm, the length is most often 2.6 m, 2.7 m or 3 m, the panels are 0.5-1.0 cm thick. The harder and thicker the panels, the they are more reliable and durable. As a rule, the panels already have a pattern - patterns, stripes, etc.

Often the design of the apron panels imitates different surfaces- from brick to mosaic as in the photo below.

1. PVC lining - its width varies from 10 cm to 12.5 cm. Length - up to 3 m. Most often, the lining is monophonic. Most popular colors- white, beige, cream.

• A plastic apron is often called both laminated MDF, and skinned with photo printing, and acrylic glass. But since, nevertheless, these are completely different materials in appearance, price and performance characteristics, we will not consider them in this article.

For those who still doubt - the pros and cons of the material

Also see our other articles:

Arguments for:

1. The main plus is that plastic is the most available material for lining the apron and all possible options;
2. The service life is about 5 years, which is a lot for such an inexpensive material;
3. A plastic apron can either be seamless or have a minimum of inconspicuous seams;
4. Mounting and dismantling it is very easy, the installation of a plastic apron does not require careful preparation walls, and if desired / necessary, you can change the panel at any time. In addition, many companies offer to cut holes for sockets, pipes, etc. on the spot;
5. The plastic apron fits snugly against the wall, hides irregularities on it and can hide electrical wiring behind it;
6. The surface color and pattern are quite stable;
7. Kitchen apron made of plastic is very easy to clean, not afraid of high humidity, frequent wiping;
8. You can choose the most different design- wall sheets can be glossy and matte, with or without embossing, plain, with a pattern or with photo printing, they can also imitate stone, wood, brick, or tile. In addition, you can choose an apron made of PVC lining, which will be similar to the classic wooden lining;
9. ABS sheets, wall panels, PVC lining are relatively heat resistant and can withstand temperatures from 40 C ° to 80 C °, but part of such an apron is near gas stove it is better to close it with glass or trim it with another material.

Arguments against:

1. Loses in appearance natural materials;
2. Of course, a plastic backsplash for a kitchen is less heat-resistant than tiles, porcelain stoneware, stone and glass - at temperatures above 80 ° C, it can be deformed. Therefore, as mentioned above, it is recommended to cover the section of the wall behind it clear glass or lined with any more heat-resistant material. This is especially necessary if the kitchen is installed, and not.
3. It is afraid of scratches and mechanical damage, so cleaning and washing plastic with hard brushes with abrasives is highly undesirable;
4. PVC surfaces are afraid of acetone.

Color and design - how to choose?

• If you have, then try to choose aprons light shades with an unobtrusive pattern, for example, in the form of a classic "boar" as on next photo. Plain wall panels will not visually overload the already filled with things and appliances workspace kitchens. Also, beige, cream, light grey, white apron will add light and "expand" a small or narrow room. And the soiledness of light surfaces is more a myth than the truth. In practice, White color exactly the same easily soiled as all the others, but at the same time makes general form work area more carefully.

• Of course, the style and color of the kitchen apron should match the overall atmosphere of the kitchen and be selected under the countertop or fronts of the set.

• If you would like to purchase sheet plastic with photo printing, then be careful in choosing an image, because the format of the panel does not allow the picture to “turn around” and it may look too colorful.

Do-it-yourself plastic apron installation

To install an apron from plastic panels, sheets or lining with your own hands, you need to do the following:

1. We determine the dimensions of the apron - it should be such that it protrudes 1-3 cm beyond the countertop, but in height from the countertop to wall cabinets it can be anything - directly to the level of the cabinets, go a little behind them or be lower. In the latter case, you need to properly seal the joint between the sheet and the wall and decorate the visible ends with molding;
2. We cut plastic panels, sheets or lining with a hacksaw with fine teeth. Some panels are cut with a regular cutter as shown in the photo below.

1. We fix the panel on the wall. This can be done in three ways:

• Express method: just glue the plastic to the wall with liquid glue, which is applied to the wall and panels with a distance between adhesive strips of about 15 cm. This method is good if the panels are glued only to the backsplash, and not to the entire wall / walls, otherwise dismantling would be problematic. In addition, it is advisable to glue the panels on the base, prepared in the following sequence: primer, leveling and sealing the cracks with plaster to a satisfactory or good condition (you can not bring it to the ideal), then after the plaster has dried, the primer is applied again.

• Installation on self-tapping screws: you can screw the PVC apron in the corners onto self-tapping screws.
• fastening to metal profiles: it is best to make the apron removable, for this you need to screw it to the wall using the same special screws metal slats for wall panels as in the photo on the right. They will allow you to easily change the apron if necessary or desired.

For repairs, it is important that the materials used are of high quality. An equally valuable nuance is the possibility of a wide choice of finishes. For these reasons, if you are planning a renovation in the kitchen, pay attention to the work area panels made of plastic. Read the information about these products to decide if they are right for you.

Modern plastic panels for the kitchen

The use of this type of material in repair work ah perfectly responds to the basic needs of the consumer. Modern kitchen wall panels made of plastic have undeniable advantages in terms of price and ease of installation on the required surface area. Diverse design and the opportunity to order an individual drawing also attracts many buyers.

In this segment of materials for finishing the kitchen, everyone can find an option by making a choice according to the following criteria:

• type of material - polycarbonate or cheaper polyvinyl chloride (PVC);
• type of joints - panels are seamless or with seams that will be part of the decor;
• coating texture - glossy or matte;
• the method of applying the pattern is film (a special film with a pattern is glued onto the plastic) or printed (the image is printed with ink on the panel).

Should I make a kitchen apron out of plastic?

The market provides a variety of materials for wall decoration near working surface in the kitchen: ceramic tiles, MDF, glass, mirror aprons and even mosaics. How to reasonably determine what is best for you plastic panel? Consider the pros and cons of this option.

How to choose pvc panels for the kitchen

The range of aprons made of plastic is very wide and varied. To installed panel made you happy for a long time Before making a purchase, you need to pay attention to several criteria.

• Color solution should not only fit the style of the interior, but also be non-staining so that you do not have to wash it often.
• Glossy kitchen panels on the wall will add volume and light to the room, but when cleaning they must be wiped dry so that there are no streaks.
• The height of the apron should correspond to the distance from the worktop to the bottom edge of the wall cabinets.

If for the first time you intend to independently install a facing apron for a plastic kitchen, give preference to a one-piece seamless product. So you do not need to properly dock a lot of plastic sheets. Before buying, please check:

• whether the panel is deformed;
• whether the color is applied evenly;
• whether there are any chips or dents on the surface.

Where to buy and how much do kitchen panels cost

To purchase a high-quality plastic kitchen apron, visit construction hypermarkets - they offer the most wide selection. Before that, you can look at the product catalog on the Internet and first decide on the options for the apron in the kitchen. Bargain purchase can also be made in small specialized stores. The difference in price on the panel is from 155-160 rubles. up to 220-250 r. for 1 sq. m. This characteristic depends mainly on whether the drawing was applied to plastic and in what way it was done.

How to fix kitchen wall panels

This type of repair is easy. If the wall where the apron will be mounted is uneven, a horizontal wooden crate is first installed on it. To do this, the planks are fixed at a distance of approximately 50 cm, fixing with self-tapping screws in increments of 25-30 cm. If the apron should cover adjacent walls, you need to attach vertical beam.

Panels can be nailed to the crate with small nails, but it is more convenient to do this with a construction stapler. If the apron consists of several sheets, the installation starts from the corner. The next panel is brought into the first panel and so they move to the next corner until the entire required surface is framed. In the case when the wall is even, the plastic kitchen apron can be fixed with liquid nails.

Video: What does the kitchen panel-apron look like

Nowadays, plastic is considered one of the most wear-resistant materials and can even compete with glass and ceramics. No less popular are aprons for the kitchen, made on plastic base, because with this technique you can transform the kitchen and improve it several times operational properties. You will learn how to glue an apron in a plastic kitchen from this article.

• In order to enhance the color balance in the room, experts recommend installing aprons for the kitchen, the color of which contrasts with the rest of the furniture. If you combine different shades with interesting ornaments to match the design of the room, you can design your workplace very competently.
• If bright colors can not be combined with the design of the room, it is possible to install transparent plastic by installing it behind an apron beautiful backlight, which can visually enlarge the kitchen several times and cheer up others.
• An apron for a kitchen made of plastic with photo printing will be an excellent option, because the price and quality will ideally match each other, and the installation of such an installation will be quite easy.

What are plastic kitchen aprons?

Before you make an apron in the kitchen from plastic panels, you need to find out what types they are divided into:

1. PVC panels - have a width of 10-50 cm, a length of 26, 27, 30 cm, and a thickness of 5-10 mm. During the installation itself, seams appear. If the installation is carried out poorly, then gaps may form, where fat and unwanted liquid will soon fall. To avoid such problems, it is recommended to call a repairman - he will do his job at the highest level.
2. Sheet plastic panels. Such plastic ultimately remains smooth and even, after its installation there are no seams left. In this case, a panel of the selected dimension is cut out of a single canvas, which is soon fixed on the wall.
3. Carbonate glass is the most durable type of plastic. Such a material is transparent, and its properties are very similar to those of metal. It is very difficult to break such plastic, and almost no dents form on it.

Pros and cons of plastic panels

Many users, before attaching an apron for a plastic kitchen, get acquainted with its positive and negative properties. This helps to finally establish oneself in one's decision or to think over alternative options.

The positives include:

• Low cost when compared with other materials.
• Decent level of moisture resistance.
• Resistant to temperature extremes, with the exception of exposure to direct fire.
• Resistant to aggressive chemicals.
• Bacteria cannot grow on the surface of plastic.
• It is very easy to care for such a panel.
• Relatively light weight.
• You can install such a structure yourself.
• Easy dismantling.
• Tight fit to the wall.

Of course, like any other finish, a plastic apron has several disadvantages:

• If it is located near the gas stove, the plastic may quickly deform.
• Hard brushes and abrasive chemical compounds such material is impossible - scuffs and scratches may form.

Important! Wash this material with a sponge and a mild detergent.

Where to buy such an apron?

Plastic is one of the cheapest and, at the same time, the highest quality finishing materials. For this reason, most of the population can glue an apron in a plastic kitchen, because this option is very budgetary. However, it is worth considering that if you purchase an apron on which there will be photo printing, be prepared for the fact that its cost will be higher even than an apron made from other materials.

Few people know where you can order such an apron. You can buy it at construction stores, furniture fittings stores. Experienced consultants will provide you with professional assistance in choosing a wall apron, as well as tell you about the nuances of its installation.

Important! Before you buy and install a plastic kitchen apron at home, you must ask the sales assistant hygiene certificate on the this species material. This is necessary in order not to be deceived and not to buy a fake.

Attaching the apron to the wall

So, you bought the type of apron you like and are ready to proceed with further installation. Keep in mind that it is necessary to glue such a coating at a time when the repair of the room has not yet been completed. First, a flat wall needs to be primed and marked. After that, the panel itself is glued, adhering to the following algorithm:

• By level, it is necessary to outline the lines of the lower and upper edges of the panel.
• Make an apron cut.

Important! This installation should protrude beyond the lines that you have outlined and be closed by the countertop and wall cabinets.

• "Liquid nails" must be applied to the material and pressed the apron against the wall to stick the plastic apron in the kitchen.
• It is better to fix the edges of the apron using self-tapping screws.
• If the plastic sections are open, they must be covered with decorative skirting boards (can be replaced with starting strips).
• The joints must be masked with strips that match in color.

Important! Install this beautiful element the room is not that difficult, however, to remove it, you have to move the furniture. Adhesives often severely damage the material, which makes the plastic not so good and there will be no point in reusing it.

From this article, you made sure that it is not so difficult, not expensive, to give an attractive look to the working area in the kitchen, and you also learned how to do it. kitchen apron from plastic panels on their own, significantly saving on the call of the master. Proper care and careful attitude to the material will provide you with it long term services.

To sheathe the walls in the kitchen and at the same time be original, today all possibilities are being created. A huge selection of materials of any price category, design for every taste - in a word, just look for your own option. One of the best options for the design of a kitchen apron - wall panels.

Panels for the kitchen, apron: what are

The main requirement for kitchen panels- be spectacular in appearance and tolerate moisture well. If a couple of decades ago you would choose a tile, today its popularity is falling.

And this is understandable, because despite its beauty, ease of maintenance, the tile is not so easy to install, and it will cost a little by today's standards. And the panels became the main competitor of the tile.

And they already, speaking in detail, can be made or decorated with anything, from the same tile to film or glass.

Types of panels for an apron:

1. Film. For the price, this is the most democratic type. decorative design panels. It can be spectacular in appearance, sticking the film is very simple, but here's a significant minus - poor resistance to high temperatures. Moreover, the film will be used for a very short time, moreover, it combustible material i.e. fire hazard.
2. Steel sheet. There is such an option, but it does not belong in the kitchen either. And outwardly, this is not the most profitable material, and for the price it will cost you a lot. Moreover, the stainless steel panel is not cleaned very well.
3. glass. And this material can be found flaws, but still use it very often, which can be explained. Glass is not afraid of humidity and temperature changes, it is easy to install, any pattern fits perfectly on it, and it is attractive in price. And the backlit glass looks amazing! Well, the minus is the fragility of the material, it is very easy to injure glass, unfortunately.

There are other types of panels that can be considered separately.

PVC apron: what to say about this material

PVC panels are a very popular material for interior decoration, which has found its use in the kitchen.

Speaking strictly chemically, PVC is a mixture of ethylene, chlorine, as well as hydrogen and carbon. To improve the quality of the material, stabilizers and dyes are added to it during production, as well as special additives that affect its immunity to ultraviolet radiation.

There are several types of PVC panels:

• Slatted narrow (lining);
• Sheet panels;
• Square tiles;
• Sandwich panels;
• Single color;
• With thermal printing;
• With offset printing;
• Metallized;
• Laminated;
• Lacquered;
• With frieze;
• 3d panels.

At this material- PVC or plastic - there are pluses and minuses.

Plastic wall panels for an apron: advantages and disadvantages

First, it is worth considering the obvious advantages of plastic panels.

Advantages of PVC panels:

1. Durable, according to the manufacturer, who assures that their service life is at least 10 years;
2. High temperature resistance;
3. High moisture resistance;
4. High soundproof characteristics;
5. Small weight of panels;
6. The ability to choose a variety of drawings, patterns, imitation;
7. Low price.

Obviously, these pluses are already enough to pay attention to this material.

Cons of PVC panels:

• When heated and burned, they emit substances unsafe for the human body;
• With a sharp temperature difference, they are prone to deformation;
• "Afraid" of mechanical shocks;
• In the gap between the wall and the panels, pests can start;
• They are not always convincing in appearance, they can look fake, cheap.

Of course, it is worth mentioning how to fix such panels. There are three popular fixation options: with the use of crates, with the use of fastening clips and mounting strips, with the help of liquid nails glue.

Proper installation of PVC panels (video)

Decorative panels from MDF

MDF backsplash wall panels are used quite often, and it is worth saying that this is a smart choice.

Judge for yourself, MDF panels:

1. Very dense, hard, durable;
2. It is safe, environmental pure material, which cannot be said about the same plastic panels;
3. Special special care these wall panels do not require;
4. They are highly resistant to moisture;
5. This is a fireproof material, which is very important in the kitchen;
6. It is processed, thanks to which you can decorate it with a variety of drawings and images;
7. It is inexpensive;
8. Not afraid of fungi and mold;
9. Easy to mount.

It is not necessary to install MDF wall panels on a perfectly flat surface.

Wall panels were thrown off in the kitchen

Skinali - this is the name of modern glass wall panels, which are distinguished by photo printing made by special equipment.

Tempered glass is made out of photo printing, which allows you to create a variety of patterns, images, from classic to surreal.

Blurred abstraction is in fashion today, but if you are a conservative, then still life, flower images will be a good choice.

In any kitchen, you can install such panels - they, thanks to the color and pattern, can create the most different effects. For example, expand the space, make accents, play along dominant colors in the interior.

Waterproof wall panels in the kitchen (video)

To make it easy to maintain working area the kitchen is clean, it is customary to protect it with a so-called apron made of moisture-resistant materials.

Most often, wall panels made of plastic or MDF, as well as ceramic tiles, are used to decorate this part of the headset.

What a kitchen apron is glued to - the choice of glue

Tile. Until relatively recently, tile was the only option when choosing a material for finishing a kitchen apron. And today, ceramic tiles are very popular.

As for the choice of adhesive for tile installation, everything is quite simple here - any universal tile adhesive will do.

The following dry mixes enjoy a good reputation among finishers:

• Knauf Fliesen,
• UNIS 2000,
• Bergauf Keramik Pro,
• weber.vetonit,
• CERESIT SM-11.

All listed brands of glue are a dry mix based on cement with special additives, they are suitable for mounting ceramic tiles to various bases.

To prepare a working solution, it is enough to add the amount of water specified by the manufacturer to the dry powder and mix thoroughly. Mixtures such as IVSIL Mosaik or Bergauf Mosaik are suitable for laying mosaic and transparent tiles. They are white in color, so they are suitable even for capricious materials.

Plastic and MDF. A wall panel made of plastic or MDF will cost much less than tiles, and there will be much less dirty work if you choose this material.

Installation of a plastic apron is possible in two ways: with adhesive and with the help of special fasteners. The adhesive (frameless) method is attractive in that it hides the traces of installation - the panel remains intact and monolithic.

However glue the plastic apron You can only on a perfectly flat wall.

On what glue to glue an apron made of plastic panels or MDF? Universal glue for mounting plastic to any base (concrete, gypsum fiber board, wood, etc.), liquid nails will become.

At their core, they are of two types: neoprene (neoprene - synthetic rubber) and acrylic (water-based). The first ones have a pungent odor and are quite toxic, acrylic ones are environmentally safe, but more sensitive to water and temperature extremes.

For finishing the kitchen apron with plastic wall panels, as well as MDF panels, according to reviews professional finishers, glue brands such as:

• Mounting adhesive TITAN "Panels & Moldings" - heavy-duty rubber-based adhesive. Fast and secure bonding of finishing and decorative materials plastic, MDF, wood boards etc. to most absorbent building substrates. Resistant to changes in temperature and humidity.
• LIQUID NAILS (Liquid nails) LN-910 (Panels and moldings) - a specially developed adhesive for fixing plastic panels, skirting boards, moldings and other decorative elements. The glue does not contain toluene and acetone, it is resistant to moisture and temperature extremes. Provides reliable adhesion to concrete, brick, wood, drywall and other stable substrates.
• Moment Mounting MP-40 "Universal" - designed for fastening wall panels and moldings made of PVC, MDF, wood and plastic. The adhesive retains elasticity after drying, waterproof. Suitable for most building materials. Can be used on uneven surfaces (fills voids well), has excellent adhesion.

How to glue an apron in a plastic kitchen with your own hands

The installation process itself is not difficult, but requires accuracy.

The hardest part about working with a solid plastic panel is fitting it to the size of the kitchen.

At the marking stage, several horizontal measurements should be taken, since the walls are far from always perfectly even.

How to glue an apron?

The process consists of several successive stages:

1. Surface preparation. If there are wallpapers on the walls, they should be removed. The wall is cleaned of peeling plaster, various pollution and cover with primer. Better choose acrylic primer for rooms with high humidity- it contains antibacterial and antifungal additives.
2. Applying glue. Liquid nails LIQUID NAILS and any others are applied with a special gun only on a dry, fat-free surface. This should be done not in a continuous layer, but pointwise or with a snake.
3. Gluing. The surfaces to be bonded are pressed tightly against each other and immediately separated to make sure that there is enough adhesive. After 3-5 minutes, the final gluing is carried out by pressing the panel firmly against the wall. The setting of the adhesive occurs almost instantly, however, the greatest bonding strength is achieved in a day.

VIDEO INSTRUCTION

We glue an apron from MDF in the kitchen

This procedure differs little from working with a plastic panel, it also consists of three stages:

1. Surface preparation. The wall is cleaned and, if necessary, leveled. Well absorbent surfaces are treated with a primer.
2. Application liquid nails. The workpiece is tried on in place and cut off the right size. A layer of glue is applied to the MDF panel pointwise or with a snake.
3. Gluing. The panel is applied to the wall and pressed lightly, after which it is removed, and a technological pause is maintained (3-5 minutes). Then the panel is finally glued. For greater reliability, a heavy apron can be supported in several places with slats; after the glue has completely dried, they are removed.

VIDEO INSTRUCTION

Don't try to stick plastic panel or an MDF apron the first time, since this is far from always possible. Attach the panel to the wall, then lightly tamp and remove.

After a pause of a few minutes, you can proceed to the final bonding. In most cases, it is enough to press firmly once on the surfaces at the joints in order to achieve a quick setting of the adhesive.

The visible parts of the edge of the apron should be additionally ennobled with MDF corners of a suitable color.