Panther alarm instructions with feedback. Panther alarm, useful information, how to install. Dynamic Disable Alarm

In our turbulent times, vehicle protection has become topical issue. Naturally, the market has big choice security systems. The article deals with Pantera alarm: its features, advantages and disadvantages, models, operating instructions.

[ Hide ]

Characteristics of the anti-theft system

Car alarm Pantera — anti-theft system new generation.

The lineup

Pantera alarms are presented in a wide range. You can identify the model by the key fob, and you can also learn about their capabilities from the instruction manual.

SLK625RS

The SLK 625RS security system has become very popular. Model with auto start and two-way communication. The kit includes two key fobs.

SLK 675RS ver 2

Signaling Pantera SLK 675RS ver 2 has a standard set of functions, as in the previous version, but added with the function auto start engine at a given time. A two-level shock sensor allows you to set the sensitivity correctly, thus eliminating false positives.

QX270

This car alarm with two key fobs has the possibility of a programmable code that allows you to turn off the system. It is possible to enable and disable the alarm mode in two stages. Complete with QX 270, the instruction contains information on installation and configuration (the author of the video is Avtozvuk.ua - Autosound Base).

XS 1000

Model XS 1000 is equipped with two transmitters, a dynamic security code, a two-level shock sensor. The instructions that come with the XS 1000 system make it possible to understand the installation and configuration. Silent staging arming and disarming, protection against false positives - pluses XS 1000.

Pros and cons of devices

The installation consists of the following steps:

First, turn off the power to the car by removing the negative terminal on the battery.
Under the hood is a siren with a mouthpiece down.
The control unit is installed in the cabin.
Next, you need to install a shock sensor, trunk and hood limit switches, and a Valet service button.
Next, you need to connect to the on-board network.

The settings for each type of alarm have their own nuances. Therefore, regarding the settings for a particular model, it is better to refer to the instruction manual.

After installation, you need to check the operability of the security system in order to use it confidently.

How to turn off the device?

It is performed by pressing a button on the key fob. If this does not happen, then you need to know how to turn off the alarm.

You should proceed as follows:

reduce the distance, radio interference may be the cause;
check ;
replace the batteries in the key fob;
if you have forgotten the pin code, then you need to find it out from the company that installs the system;
fuses should be checked.

If the listed measures did not work, you should contact the company that was involved in the installation.

As practice shows, modern world You can't be absolutely sure that your vehicle is safe. The products of the Russian company Saturn High-Tech, whose trademarks are car alarms such as Alligator, Panther and others, are considered one of the best on the market. And although Panther devices appeared a little later than the Alligator, due to their efficiency and product quality, they have earned considerable popularity among car owners, and their history has been going on for more than 15 years. These systems are designed using modern anti-theft mechanisms and include unique features such as protection against false alarms, arming in case of malfunctions, and so on.

Panther alarm, types of alarm panther, alarm equipment

On the market there are both single-sided and double-sided Pantera car alarms with autostart.

Each system comes complete with:

Switch.
Two-level shock sensor.
Powerful siren.

One-sided devices are represented by models CL-500, QX-4, CLK-355, 375. Their main functions include:

Bilateral car alarm models

Models QX-270, SLR-5650, SLR-5625 BG, CLC-200, CLC-180, SLK-468 are Pantera two-way car alarms. These devices have the following features:

Locking and opening doors automatically.
Vehicle search.
Call the car owner.
Vibration option.
Timer, clock, alarm clock.

Panther, main functions, model configurations, advantages and disadvantages

Car alarms with auto engine start are represented by models such as SLK-868RS, SLK-775RS, SLK-625RS. These devices have a wide range of service functions, wide opportunities autorun, the presence of a multifunctional original key fob and increased anti-theft protection. Pantera car alarm manual comes with the device.

Assistant tools, consumables for alarm installation

Independent installation of the Pantera car alarm must begin with the selection of the required tools, namely:

Double-sided mounting tape.
Ties.
Drill.
Control lamp.
Scissors.
Multimeter and voltmeter.
Insulating tape.

What the car owner should know before starting work on installing an alarm

As a rule, the Pantera alarm connection diagram is included with the device. Some car owners are anxious about it, however, in fact, everything is quite simple. If you want high quality and reliable installation this device on your own vehicle, be extremely careful and do everything according to the requirements.

If you are installing a Pantera car alarm on a vehicle with mechanical box gear and your selected model is a remote start device, you must install the magnetic switch. Otherwise, you may well have problems with the remote alarm start option.

You need to know which interlocks are used in your car and what color wire you need to connect to interact with car alarm options. You also need to know how to wire the relay for the vehicle door lock option.

Panther alarm installation, step-by-step progress

The siren must be installed in the engine compartment in inaccessible place. Make sure it is located away from moving or combustible parts of the motor.

Mount the switch contacts in the hood and trunk. It is necessary to choose a grounded place in which water cannot affect their performance. Switches must be installed in such a way that they do not interfere with opening or closing the hood.

The LED should be installed on the instrument panel or in the line of sight to provide a deterrent. The light must be perfectly visible from the outside of the vehicle and from the driver's seat. The antenna must be installed under the instrument panel line belt for better reception.

Mount the control switch and manual switch in an accessible place. This place can be the glove compartment or the lower section of the panel.

Mount the relay in the place where the ignition switch solenoid wire starts. It must be secured with a cable around the relay wires.

Test the performance of all functions using the supplied instructions.

Keychain Panther, if the keychain is broken or lost, how to connect a new keychain to the alarm, step by step instructions

If any part of the system is broken, you can hold an event such as flashing a Pantera car alarm. In other words, it is necessary to replace the broken element with a new one by connecting it to the system. You can do it yourself.

If you broke or lost the key fob, buy a new one and connect it to the car alarm, for which open the old key fob and see what type is included with the device. There are two types of keychains:

The signal transmission frequency is 308 MHz.
The signal transmission frequency is 434 MHz.

You can open the key fob with a screwdriver, inside of which you will find a crystal oscillator. On it you will see the number of the signal transmission frequency.

When the necessary kit is purchased, proceed to the firmware of the car alarm. Under the steering wheel of the vehicle, you will see the clutch pedal, the hood opening lever and the safety unit placed there.

To install a new key fob, you need to find the switch, which is located in the front section of the safety block. Put it in the "Install" position. Next, press any button on one key fob, then on the second. Then change the position of the switch to the "Off" position. The Panther alarm firmware will enable the new key fob to connect to the system.

The Pantera car alarm is presented on the market in a mass various types, which are able to meet the safety requirements of even the most capricious car owners. Some of them are enough simple devices, which can only emit an alarm sound during unauthorized opening of the trunk or doors.

More complex options are characterized by a unique warning signal that is easy to identify in case of danger. Through several sensors that are connected to the central computer, the car alarm is triggered by stimuli, such as the sound of breaking glass or suspicious activity that occurs in the immediate vicinity.

Buying a new vehicle is a big investment, so it makes sense to think about its safety. The mass of options for Panther car alarm models provides great opportunities both for your budget and for personal preferences.

In today's world, one cannot do without various methods the security of their property, and one of these is an alarm system, both for cars and for apartments. In our country, it is in great demand car alarm with autorun "Panther", and this is not at all accidental. The models of this company are distinguished by great functionality, compliance complete list world quality requirements, great job in the conditions of our country.

The price of the Panther car alarm is quite pleasant and lifting for compatriots, all thanks to its manufacture in Asia. In addition, each car alarm of the Panther model is universal, so finding something that suits your car is not difficult. Well, the range of the company is quite large.

Models with the best cases and stuffing

Of course, you may be interested in the Pantera alarm instructions, but first we will see what models the Pantera car alarm can boast of.

Model 1 - SLK 625RS

This model has autorun and two-way signal directionality. The key fob is equipped with an LCD display, so it is convenient to use the key fob. It has a low battery indicator, arming and disarming, Valet, remote engine start, including diesel, as well as a car search function. Allows you to close and open doors when the ignition is on. Works remotely within a radius of 2 km.

Price: 3280 rubles.

Model 2 - QX-270

Again two-way communication, Valet mode and auto-start, combined with the Panic function, audible and visual alerts, machine shock and temperature sensors, and engine running. The communication range with the car for this key fob is less - only 300 m, however, it has a built-in pager with a range of 800 m, where alerts come, including those about a hacking attempt. Security is activated automatically, and the car can be found directly on the key fob. The Pantera QX-270 alarm works at temperatures from -40 to +85 degrees Celsius.

Price: 4500 rubles.

Model 3 - QX-44

The Panther QX-44 alarm model can be configured to be controlled from any location, in addition, it has such standard functions, such as Panic, Valet, Potential Theft Alert, Low Battery Indicator, Car Finder, and Automatic Door Locks when the ignition is turned off.

The control range is only 30 meters, but a set of two key fobs, the “Comfort” function, automatic door locking when the brake is pressed, self-diagnosis, memory for the last system resets, passive diagnostics and silent disarming perfectly compensate for this shortcoming.

Price: 3000 rubles.

Model 4 - SLR-5625 BG

Another model is the Pantera SLR-5625 BG car alarm, also with two-way communication. It has a vibration signal, LCD display, self-powered and very interesting opportunity work with windows and tailgate.

In addition, the model boasts Panic and Valet modes, turbo timer, security, car search and driver call functions. It is armed and disarmed silently, auto-connection is also configured, it protects even when the engine is running. In case of car theft, it blocks its operation, it is also protected from scanning. It is self-powered and operates with a range of 800 meters.

Price: 4500 rubles.

Auto connection instruction manual and setup

Some do not know exactly how to use a feature such as auto-connects. Therefore, we will consider what the instruction manual for the Panther alarm with auto start looks like.

For starters, you need to know what automatic connection starts after turning off the ignition and closing each door in the car. By the way, last function, usually programmed, as, for example, on the CL500 model.
You can learn about the inclusion of protection by a flashing light. Turning on the alarm blocks the engine and locks the car doors after the next half a minute.
Also, the instruction manual for the Panther alarm warns that if you do not see the siren itself flashing and the turn signal lamps flashing, as well as the subsequent slow flashing of the alarm, then at least one door in the car is not closed. Or it means a malfunction in the circuit. In any case, the alarm will not turn on automatically.
If after thirty seconds you see three siren signals, and also hear three signals from the key fob, accompanied by five indicator lights on the display, you can talk about a malfunction of the shock sensor. In this case, the security will still work.

Remote control wiring diagram

Usually each alarm box has its own wiring diagram, but we can take a look at what it looks like standard scheme connection of the alarm system "Panther" on the example of the model XS-1500.

How to use the key fob correctly so that repairs are not required?

Undoubtedly, the instructions for use are also important, or rather, the operation of the key fob, because not every motorist knows how to use them. Each model of the Panther car alarm has an instruction that is understandable to everyone. It is important for you to first program the key fob for the functions you need.

This is where the instructions should help. All the modes and capabilities of your model will be listed there, as well as the buttons that you need to press to turn on a particular function. Remember that all functions have a radius of work, which is written specifically. Sometimes it is necessary to carry out the key fob data initialization procedure.

If the key fob malfunctions, you should immediately carry it to the service.

The device with which the control is carried out is a key fob. It has five buttons with which you can give commands. Communication is two-way. For issuance necessary information The key fob is equipped with a small LCD display.

In addition to the main keychain, the set also includes additional keychain with four buttons. The radius at which two-way communication is provided is one thousand meters. If we talk about the distance at which an information signal can be transmitted, then we are talking about two thousand meters.

Main functions

The Panther keychain has a number of important functions for car security, but the functionality is not limited to them. In order to specifically imagine the possibilities, we will tell you in more detail about its functionality.

Hours provided. Of course, in our time this does not surprise anyone, but we note that this function is supplemented by the presence of an alarm clock, as well as a countdown timer.
The code provides protection against scanning and interception. As is known, modern technologies in some cases, they allow unauthorized access to the system, but in this case, a dynamic modification of the program code is provided, which gives elevated level protection in such situations.
Arming function with disabled signaling to the main key fob. Defence from false positive. On the one hand, this can somewhat reduce the degree of protection of the car when trying to steal it. On the other hand, there are cases of accidental operation from the weather ( heavy rain) or other similar effects on the vehicle. In any case, the driver can use it if he sees fit.
The ability to transfer a call from inside the car to the owner's key fob. This may be important in the event that a passenger remains in the car and he wants to remind the driver of himself.
remote start engine. Here there are several various options use. There is a start on command. It also provides periodic start with shutdown. A regular interval of time after which the engine is started can be specified. It is possible to start depending on temperature changes.
Some other features.

Contents of delivery

This system consists of several parts. After purchase, they must be carefully installed. If the driver has some skills in working with such equipment, then he can easily install it. If this seems too difficult, then it makes sense to contact the appropriate specialist. We list the main devices that make up the Panther.

Main electronic unit.
A keychain with a display and five control buttons.
Additional keychain. There is no display on it and there are only three control buttons.
The shock sensor is two-level.
Siren for giving a loud sound signal.
A relay that is designed to block the engine at the command of the security system.
A special block with wires designed to install a blocking relay.
LED indicator, along with its cable.
Pushbutton switch for Valet operating mode. Sometimes the question may arise as to what this mode is intended for. The point here is to turn off some protective functions when it is necessary for the driver. Such a situation, for example, may arise during the washing of the car.
The scope of delivery includes a limit switch.
Wire kit.
Instruction.
Package.

As an example, we can say about the possibility of installing GPS sensors. Such additions will increase the level of safety for the car.

How the key fob works

Once upon a time, in the very first models it was used static code. Due to the fact that it constantly retained its value, there was a high probability of hacking and, as a result, the ability to turn off the alarm when stolen. This level of security was clearly insufficient.

In the future, the creators began to use much more secure dynamic code. The principle of its operation is that with each command given by the key fob, the access codes of both the key fob and the entire security system change.

Since this approach uses a different code each time, the likelihood of hacking has dropped dramatically. However, such a possibility still exists.

AT modern models the principle of operation of the key fob has been improved again. The dialogue model of code change is taken as a basis here. It is said that its formation occurs in three stages.

The key fob communicates with the security system.
Based on the received data, a special signal is sent to the key fob.
Taking into account the received information, the key fob makes changes in the codes of the security system.

Such a security system makes it almost impossible to crack the system's access codes.

User manual

In order for everything to work correctly, you need to competent installation and programming. The accompanying instructions should serve as the basis for this. Let's talk about it briefly.

The first section of the document briefly lists the main features. Then there is a list of functions that will need to be programmed. Here are some of them.

Automatic arming.
Locking doors when arming.
Locking the doors when the ignition is turned on.
Unlocking the doors in the same situation.
immobilizer mode.
False alarm protection.
Restarting the system in automatic mode.
A thirty-second delay to turn on the guard (we are talking about the fact that if you start the engine without turning off protective mode, then the siren will be turned on after the specified time).
And also some other features.

The following section describes how to give certain commands using various key fob button presses.

Unlocking or locking doors.
Turning on or off protection.
Complete or partial shutdown of the shock sensor.
Silent activation of the security system.
Temporary cancellation of passive arming of the car.
Enable or disable Panic mode. We are talking here about the short-term inclusion of chaotic sound and light signals for a short period of time.

In the second part of the manual follows a detailed description with explanations for each issue discussed.

The programmable functions are considered in detail and it is described in detail how to configure them.

Ends instruction detailed description security system devices and the process of its installation.

What to do in case of malfunctions

As in any technical device sometimes malfunctions may occur. Consider a few possible situations of such kind.

The range of the key fob is very important for the safety of the car. If it starts to decrease rapidly, then something needs to be done about it. In this case, the most likely cause is a dead battery. This is a possible, but not the only reason.

In order for the security system to recognize the key fob, it needs to “remember” about it, remember its data. To correct this, it is necessary to carry out the key fob data initialization procedure, which is described in the instruction manual.

If the key fob stopped working with a discharged car battery, with a possible sudden impact electromagnetic field or due to very low temperature, then his work may change unpredictably, first you need to make some attempts to correct this situation. To do this, it is necessary to carry out an emergency shutdown and, having driven a certain distance, check the operation of the system. Sometimes repeated pressing of the key fob buttons can help.

If the malfunction continues to occur, then the next step is to disassemble the key fob. It needs to be untwisted and checked for dust and dirt and for the integrity of the contacts. It is also possible for liquid to enter the key fob. You need to clean it and check the health of the system.

If this kind of measures did not help, then it makes sense to contact a service workshop.

Security system programming

In order to properly set up security functions system, you need to program some of its functions. When buying a Panther, there are pre-set parameters described in the instruction manual. Perhaps this will suit you. If not, then you will need to enter the programming mode. Let's briefly describe how to do this.

Initially, you need to turn off the security system and get into the car.
Using the Valet button, additionally make sure that the security system is disabled.
Enter your private idintifier to access programming mode. It is issued upon purchase of the system and can be entered only once.
Start the car, turn off the ignition and press the Valet button as many times as the first digit of the security code. Try to keep within the allotted time. If the code consists of several digits, then you need to enter them, not forgetting the need to comply with a strict time schedule.
After entering the program, you need to press the Valet button three times. After that, it should sound sound signal and the system indicator light should start flashing.
After that, you need to turn on the ignition or do nothing for a while until a signal sounds (one short and one long beep). After that, the system will go into security mode.

Prices for keychain "Panther"

Pantera SLR-5750 will cost 3100 rubles.
Pantera SLR-5650 - also costs 3100 rubles.
The Pantera SLR-5700 is somewhat cheaper. Its price will be 2590 rubles.
Pantera SLR-5200 costs 2590 rubles.
Pantera QX-290 will cost 2900 rubles.

Conclusion

The car security system "Panther" provides not only all the basic functions of car security, but also some additional ones. It can also be said that it is developing dynamically, improving the quality of the security system provided.

Car owners are very attentive to the issue of safety. They follow the release of new products and try the most different ways that can protect their vehicle.

Such devices are mechanical and electronic. Although the former in our time are significantly inferior to modern developments, it is not recommended to completely abandon them. However, they must be installed in conjunction with other security systems. A survey of car owners showed that almost 80% trust alarms.

Car alarm "Panther": a brief description

Alarm "Panther" - the most popular model. It has an engine start function and works with two-way communication. However, there are also one-sided models in the line. The manufacturer is constantly improving its products, equipping them additional features. For example, newer models have voltage test options battery and the ability to start the engine when its power is reduced.

This alarm can be installed on all cars with injection or diesel engines. Compared to other models, the device has convenient, quick-to-remember functions. However, there are so many of them that sometimes it is necessary to use the hint in the brochure, which describes in detail the combination of all buttons. It is included with the device. Also in the instructions there are many other useful information. For example, the Panther car alarm scheme, which can be seen in the photo below.

Advantages

The main advantage of this signaling trademark- affordable cost. The difference in price between competitors is pretty decent. This is what the manufacturer attracts customers. Despite the budget, the Panther car alarm works clearly and practically without errors. The device comes with two key fobs, which is very convenient when using the car with several family members.

disadvantages

Of the minuses of the device, the occurrence of communication problems is disappointing. The alarm does not work correctly at times. The communication range of the device leaves much to be desired. Obstacles between the device and the car can be a real problem, and sometimes you have to leave the premises to perform remote start.

Alarm functions "Panther"

The instructions that come with the device describe in detail all the programmed functions. The standard set includes:

remote control of locks;
led indicator;
vibration sensors;
Anti-Hi-Jack mode and much more.

You can also independently adjust the options on the Panther device. The car alarm (the instruction contains this information in the “Programmable functions” paragraph) can be configured for automatic closing / opening mode door locks, increasing the system shutdown stages. You can also choose the time interval after which the blocking will turn on.

I would like to pay special attention to the item "Remote engine start". Here you can find information about options such as:

Short Stop function;
compatibility;
timer control, etc.

Why do drivers choose Panther?

In general, the quality of the device and the operation of functions on high level. To use the device, there is no need to memorize difficult combinations that are common among competitors. Car alarm "Panther" - profitable purchase. Why? First of all, because of the low cost. Also the device is different. large quantity necessary functions, one of which is remote control engine. The launch option works clearly and without errors.

Choice burglar alarm for a car is not an easy task, especially if this is your first car. Car alarm "Panther" will be able to satisfy all requirements. In order for the device to work flawlessly, it is necessary to purchase it only in trusted centers, as well as install it in qualified services that give a guarantee.

Remember: protecting your own car is an important function that cannot be dispensed with nowadays.

Categories

Popular