How to wash greasy stains on the door. Cleaning grease stains from entrance and interior doors

Interior doors laminated oil stain removal how to remove greasy spots from the door

For any product, in order to increase its service life, it is necessary to properly care for it. And interior doors require special care. Care products for interior doors depend on the material from which they are made. Laminated doors basically have a plywood board or chipboard, a pattern is applied on top, usually on paper basis, and laminated with a special film. The main rule in care is the safety of the upper, laminated layer. But stains can also form on such doors. various origins, which spoil the view and which are best removed.

To remove stains from a laminated door, you will need (and it is best to always have on hand):

• Several soft tissues, or a small sponge
• Solutions of household solvents (ammonia, acetone)
• Alcohol
• Vinegar or lemon essence
• Laundry soap

Stains on the laminated surface can be removed in the following ways:

1. First of all, it is necessary to determine the origin of the stain.
2. Before proceeding with the removal, remove dust from the surface of the door leaf (you can use a damp cloth).
3. Using a cloth moistened with detergent, mild remedy you can remove stains from juice, wine, chocolate. The napkin is applied for three to five minutes on top of the stain, and then wiped with a soft, dry cloth.
4. Household solvents remove stains from nail polish, cigarettes, lipstick, marker, felt-tip pens or pencils. A sponge moistened with any solvent (acetone, "white spirit", etc.) is kept on the stain for a short time, and then wiped with a soft, dry cloth.
5. If coffee stains appear on the surface of the laminated door, they can be removed with alcohol or an ammonia solution. If the coffee stain was not removed immediately, and it has already dried, then you can cook special solution(three teaspoons baking soda two hundred grams of water). Gently wipe the stain with a sponge or cloth soaked in the solution, dry with a hair dryer, and wipe with a soft, dry cloth.
6. The most easily removed stains left by wax or chewing gum. The place of contamination is thoroughly dried and cleaned with a small scraper. The operation to remove such stains must be carried out with extreme care so as not to damage the surface.
7. If acid stains appear on the surface of the laminated door, they can be removed with a cloth soaked in a solution of vinegar or lemon essence. Similarly, a napkin is applied to the stain, and after three to five minutes it is thoroughly wiped with a soft, dry cloth.
8. Difficult stains formed by paint or shoe polish can be removed with special means intended for this purpose. These funds can be purchased at any hardware store.

Stain remover for laminated interior doors

When removing stains of any origin from a laminated door, it should be remembered that a damp cloth should not be kept on the surface of the door for more than five minutes, and then immediately wiped with a soft cloth and after one to two minutes wiped with a damp sponge (soaked in plain water). This will avoid possible deformation of the upper laminated surface. But if, nevertheless, the stain cannot be removed, you should not immediately think about replacing the entire door. Currently, there are special pencils for masking stains on a laminated surface. Such a pencil can be purchased at a hardware store and match the color and tone in accordance with the color of the door. You can also seal the stain with a special, color-matched film. It is not recommended to clean stains on a laminated door with abrasive cleaners as this may damage the surface.

How much does it cost to call a measurement and change the glass in an interior door reviews

Instructions on how to care for laminated doors, tips on how to remove stains from laminated doors than to clean grease stains on the door

Greetings, readers of my blog.

Stains from water and grease, the appearance of scuffs on the surface - all these are the reasons for the loss of a presentable appearance of interior doors. Basically, stains appear around the door handles, as well as at the bottom of the door leaf at the point of contact with the legs. The problem of dirty doors becomes especially relevant with the advent of children or pets.

If the surface of the canvas is partially contaminated, then remove stains on doors won't be difficult. If the defects affect the entire surface, then you will have to resort to more radical methods.

Every normal hostess strives to maintain order and cleanliness in the house. But some surfaces are very sensitive to cleaning and in order not to make mistakes, you should follow my recommendations:

• for the manufacture of interior doors, directly or indirectly, wood is used that is afraid of high humidity. Even in the case of simple cleaning, you should not use a very damp cloth, which can lead to swelling of the canvas.
• to remove greasy stains from the door, do not use aggressive products such as acetone, thinner, alcohol.
• use a soft dishwashing sponge to remove the stain, not steel brushes. damaged MDF surface or laminated doors cannot be restored - you will have to change the canvas.

Secrets for removing stains from doors

Different materials for the manufacture of doors provide different variants to remove stains. But there are several universal ways bring back the beauty of the door:

• use acetic acid to remove green paint from a door
• Marks from the felt-tip pen can be washed off with white spirit or glass cleaner
• Some types of stains are well washed with vodka mixed with sunflower oil
• A stain from chocolate or juice - it is well washed off with a baby wipe
• The stain from the varnish can be washed off with a cotton pad slightly moistened with acetone
• Coffee stains are perfectly washed with ammonia

As you can see folk ways there are a lot to remove stains from doors, but there are also professional detergents: Profoam 2000, Sif - paste, Mr. Chister, Adrilan, Pronto and many others.

How to wash doors - video

How to remove stains from MDF doors

For the most part, MDF doors with a veneer surface immediately after repair, I strongly recommend that you open them with polish. This will protect the surface from greasy traces and spots. But if the problem has already appeared, then it must be solved.

I will share with you the method that my mother advised me. It has been used since the days of the USSR, when Mister Muscle was never even heard of :)

To restore the original appearance of MDF doors, you will need the following ingredients:

1. Potato - 1 pc.
2. dry rag
3. A little baby powder

How to remove a grease stain from a door:

1. Cut the potato in half and rub the stain until the juice appears
2. Leave the stain for 10 minutes
3. After the potato juice dries, starch will remain in place of the stain. Remove it with a dry cloth.
4. If, after cleaning, white stains remain in place of the stain, then we apply baby talcum powder to them and carefully wipe them with a dry cloth.

With the help of such folk method grease can be removed.

It is possible to eliminate contamination of doors from fiberboard with dishwashing detergent. To do this, we collect water in a small container and dilute the product in it. With a sponge, apply foam to the place of contamination and gently erase the stain. Rinse off the remaining foam and wipe the door with a clean rag.

Doors with laminated surface - cleaning methods

Thanks to protective coating from a laminated film, such doors are easier to clean than others.

Ways to remove grease stains from doors with a laminated surface:

• With laundry soap

First we prepare the solution. To do this, we need a piece of 72% laundry soap and warm water. We cut the soap into small pieces and prepare the solution.

We lather dirty places with a foam rubber sponge.

Now we wash off the soap stains and wipe thoroughly, leaving no stains on the door.

IT IS IMPORTANT TO KNOW!

The whole procedure must be done as soon as possible to prevent water from soaking into the door. Otherwise, the door will swell and the laminate will peel off.

• With the help of alcohol

IT IS IMPORTANT TO KNOW!

Do not try to use pure alcohol!

To start removing the stain, prepare an alcohol solution. It is prepared in a ratio of 1 to 9, where 1 part is alcohol, and 9 parts is water. Wet a cloth with the prepared mixture and apply it on the stain. We wait five minutes and remove the remnants with a dry paper towel.

How to remove grease stains from doors - video

Removing stains on wooden doors

Unfortunately, stains that appear on solid wooden doors require removal of the door leaf from the hinges for their subsequent removal.

Place the removed door on flat surface, previously unscrewed door handles and .

With the help of a solvent, remove from the door old varnish. Due to the fact that the solvent has a pungent odor, it is better to work outdoors.

After polish removal wooden door must be sanded with grinder or sandpaper. It is better to use paper with a grain size of 180/220.

Then dust must be removed from the door. It is more convenient to use a soft large brush.

The final stage is the coating of the door with a new layer of varnish.

Removing Grease from Painted MDF Doors

For the most part, all painted MDF doors are covered with a layer of varnish. Therefore, the use of abrasive materials and aggressive stain removers is unacceptable. Damage to the top lacquer layer will cause tarnishing and damage to the integrity of the protective layer.

There are two ways to wash painted doors:

1. As in the case of chipboard doors, we will use 72% laundry soap. Strong soapy water it is necessary to wash the place of contamination, then thoroughly rinse off the remnants of the solution and wipe dry with a paper towel.
   • citric acid

   We prepare the solution - add two tablespoons of acid to 200 ml of cold water. After mixing thoroughly, wash off the stain with the resulting mixture. Wipe the treated area with a dry cloth.

   • With a solvent

   Soak a cotton pad in the solvent and carefully wash off the greasy stain. After removal, the surface is also wiped with a clean towel.

   • Detergent

   Three tablespoons detergent add to half a glass of water. Stir and apply the resulting foam to the stain. Wait 3-5 minutes and rinse thoroughly. Wipe dry with a clean rag.

   • baking soda

   Mix three tablespoons of baking soda in a glass of water. The stain is washed off with the resulting solution. The surface is then wiped dry.

   Conclusion

   Well, that's all, friends.

   On this page of my blog, I shared with you my experience - how to remove stains on the door.

   if you have interesting ways then share with them in the comments.

   All success!

Quite often you have to wash furniture from different spots What is chipboard afraid of? So, chipboard is, of course, afraid of water in large quantities. How then to wipe furniture made of chipboard and how to reduce stains?

It is important which chipboard is in front of you - laminated, covered with PVC film, or is it not chipboard at all, but MDF. Caring for laminated Chipboard is easier than for chipboard without lamination. Ordinary chipboard cannot be wiped with a wet cloth, most detergents should not be used. Care laminated chipboard much easier.

Zelenka is easy to clean from chipboard with vinegar.

Felt pen marks can be easily removed with alcohol. Glass liquid, laundry soap

Fighting grease stains on chipboard furniture

A greasy stain from chipboard must be removed as soon as possible.

A fresh greasy stain on chipboard should be immediately wiped with a solution of water and baby soap.

Algorithm for removing a greasy spot from a chipboard surface:

• Wipe the stain with a damp cloth
• attach to a short time(no more than a minute) apply another napkin soaked in a solution of alcohol, acetone or white spirit, vinegar to the stain,
• then b Wipe quickly with a soft dry cloth and whether with cloth.

Grease stains can be removed from furniture chipboard thanks to a melamine sponge, the main thing is not to be zealous and not to rub hard.

A greasy stain from an MDF door or furniture can be removed with a simple laundry soap, and you can also use ammonia and then go through the polish.

How to wash chipboard

To eliminate extraneous odors, chipboard shelves in the closet can be wiped with a barely damp cloth with a weak solution of potassium permanganate, or soap, but after that it must be wiped with a dry cloth.

Copes well with stains on furniture of any origin "Polish 2".

After cleaning, you can treat the furniture made of chipboard with an antistatic agent.

Traces of hot, juice, wine, chocolate, etc.

A hot stain on a chipboard with a film is a folk remedy: vodka mixed with sunflower oil, and then you can rub it with a flannel cloth.

If the stain cannot be removed, it can be covered with a laminate pencil.

A stain from juice, wine, chocolate - with a simple damp cloth.

Coffee stain - ethyl alcohol or ammonia.

Stains from varnish, cosmetics - lightly applying a sponge with acetone.

Rules for the care of chipboard and MDF

Furniture made of chipboard and MDF is afraid of solvents, gasoline, abrasives and washcloths, bleaches, ammonia, chlorine, steam, mastic, wax.

A napkin or cloth should not be kept on the surface for more than 5 minutes.

Stains are best removed immediately.

Furniture cannot be scraped and rubbed with abrasive products, as well as aggressive solvents, gasoline.

Chipboard cannot be cleaned with soda or soda solution.

Summary table on the types of stains and how to remove them

Interior doors are an aesthetic and functional part of our home. Despite all attempts to keep them clean and properly cared for, stains of a different nature appear on interior doors from time to time. There is a need to clear the canvas of them. The surface may be greasy or have various pollution, all this must be removed as quickly as possible so that cleanliness and comfort reign in the house again.

Attention! Many people use the first detergent that gets in their eyes to clean the structure from stains and greasy surfaces. This is an extremely wrong decision. It can damage or scratch the surface of the canvas. The choice of detergent should be approached correctly. It is chosen based on the material of the canvas.

PVC models: work algorithm

If a interior design Made of PVC, the operation process will be simple. Detergent is selected first. Better to make it yourself. For this use special agent for plumbing, as well as ordinary soap in liquid form. Also arm yourself with soft-textured washcloths or take an ordinary cloth.

1. The selected product and soap are mixed together in equal parts.
2. The solution is applied to the area of ​​the stain.
3. The agent is rubbed with a sponge. However, be careful not to scratch the surface.
4. After that, leave the solution on the canvas for 5-7 minutes.
5. As a result, the product is washed off using a large number of water.
6. The surface is wiped dry.

Such an algorithm and a do-it-yourself tool will help you quickly wash the surface of any contaminants. As needed, the algorithm simply repeats itself, keeping the door clean.

Doors from laminated chipboard: we care about cleanliness

The construction of chipboard is a fairly popular option today. Often people complain about the appearance of greasy spots on the surface. It is not easy to wash them, because the top layer of the material is based on paper, which gets wet when it comes into contact with moisture. It is best to use cotton pads and isopropyl alcohol, which wipes stains.

If the chipboard door is of high quality, you can use a household solvent, for example, acetone or even ammonia. The algorithm of work involves wetting the sponge in the solution, applying it to the stain and wiping it dry after 3-5 minutes. Acids - citric or acetic - will also help get rid of contaminants. Beverage and coffee traces are removed with 3 tablespoons of baking soda and a glass of water. Traces of chewing gum or wax are washed as follows: the surface is dried and removed with a scraper. The only stains that you should not try to wash yourself are stains from paintwork materials. It is better to invite an experienced specialist for this.

Cleaning MDF doors

If the structures are made of MDF, and you find that the surface is greasy, you should not purchase expensive solutions. Arm yourself with raw potatoes. The work algorithm will be as follows:

1. The vegetable is cut into halves.
2. One part carefully rub all the stains.
3. Leave the surface for a while until the vegetable juice dries.
4. The place of cleaning is carefully wiped dry with a cloth.

Possible stains can be easily removed with powder or talcum powder. Fresh grease stains from the canvas are removed with dishwashing detergent and warm water. Wipe with this solution greasy surface construction, cleaning it.

Unpainted wood canvases are washed with a solution of white clay and vinegar. After receiving the gruel, it is applied to the stains, allowed to dry and washed off with water. If the surface of the doors is varnished, you should act differently. You can get rid of greasy stains by re-treatment with varnish. Of course, you will have to remove the door from the hinges and re-coat. Experts recommend using one of the following methods: flushing, mechanical or heat treatment

Maintaining a clean door is easy. Now you know how to wash any interior doors from stains. As a result, cleanliness and comfort will reign in the house.

In contact with

Comments

Unfortunately, there are no comments or reviews yet, but you can leave your own ...

Interior and entrance doors often contaminated with greasy stains. Moreover, depending on the surface, there are a lot of ways to remove such stains. In this article we will try to consider the most popular of them, depending on the type of material of the door leaf or platband.

Since we usually touch doors with our hands, fat is often transferred from the surface of the skin to the surface of the door. And for this, the hands themselves do not have to be oily, since our skin secretes fat on its own. At first glance, such traces may not even be visible, but over time, fat creates real dirty spots, as dust actively settles on it. Also greasy stains can be from the contact of doors with various liquids, such as biological nature as well as chemicals.

Removal of grease stains from a metal front door

The metal is extremely unpretentious and you can clean it of fat with white spirit or acetone. There are no problems with the purchase of both, but what to choose? Practice shows that white spirit is still purchased more often due to the absence of a sharp characteristic odor, which is very familiar to us from acetone. Also as great way Various cleaning powders with abrasive properties are suitable.

Removing grease stains from laminated doors

The laminated door is based on chipboard, or even plastic, which is covered with a paper layer with a pattern, on top of which there is a film. The latter does not have such strength as metal, therefore ideal solution in this case, it will be treated with alcohol, vinegar or citric acid. All that needs to be done is to wipe the stained surface with a cloth soaked in the above liquid, then wait a couple of minutes and wipe everything with a wet cloth. It is best not to delay with this, as leaving such components on the laminated surface for more than five minutes, you risk damaging the coating.

Removing oil stains from veneer and unpainted wood doors

It is worth remembering that the veneer is inherently a thin slice of natural wood. Therefore, it is better to remove greasy stains from it as soon as they appear. In this case, microfiber, which perfectly absorbs fats, is perfect. It is clear that we cannot immediately find out that a greasy stain has formed on a particular surface, so wiping the most endangered places once a week will be an excellent prevention.

But, as a rule, already obsolete fat has to be washed, and in this case two options are suitable:

• Ordinary clay is mixed with table vinegar until a homogeneous mass is formed. Then it is applied to the veneered surface and left to dry. Completely dried clay is rubbed off the veneer along with the grease;
• Soda and vegetable oil are taken in proportions of 2 to 1. The solution is applied with a soft toothbrush to the surface of the veneer, after which it is washed off with a cloth moistened with damp water.

All of the above is also true for unpainted natural wood doors.

Removing grease from painted doors

In the event that the stain is fresh, it is best to get rid of it with a mixture of water and dishwashing detergent. old stains usually removed with vinegar. It is necessary to let the latter soak in, and then wipe it off with the same detergent. To avoid leaving marks, it is best to work with cotton wool or a soft cloth.

How to remove grease stains from a polished surface

If your polished interior door is covered in greasy stains, then potatoes or talc can come to the rescue. The last we just process the door for 20 minutes. As for potatoes, in this case the tuber is cut into two parts and the cut place is rubbed for the same time period.

By removing the talc, we can detect stains at the work site. In this case, the ideal solution would be flour, which we, with the help of dipped in vegetable oil rags will carry out additional polishing.

Lacquered surface - the biggest problems

It is not easy to remove grease stains from a varnished door. Old spots are deeply absorbed into the structure of the varnish, and they can only be removed along with the removal of the old layer of varnish and coating with a new layer. To do this, we do a few things:

• Removing the door from the hinges and removing all handles and other fittings;
• Covering the old varnish with a layer of wash. A layer of polyethylene is placed on top, after which the impromptu compress remains for several hours until the varnish under it turns brown;
• The softened varnish is removed with sandpaper or a spatula;
• The remains of the wash are washed off with water and vinegar;
• After drying, the door is re-lacquered. Up to three layers can be applied in total.

An alternative to this method of removing varnish is mechanical, when the coating is simply erased from the door leaf with sandpaper. This method is very labor intensive and time consuming.

As you can see, in the case of lacquered doors, which quite often divide rooms in our apartments, grease stains are a very serious problem and it is better to remove them as quickly as possible.

We give grease from glass doors

Glass doors are often used in our apartments. And on them smooth surface greasy spots remain especially frequent and stand out quite strongly. In the event that this is ordinary glass, then there should not be a problem. It is enough just to wipe it with a damp or soft (so as not to leave scratches) cloth moistened with alcohol and everything will pass. However, sandblasted frosted glass is a different matter, and it is much more difficult to remove grease from it. In this case, several methods are usually used:

• Soap and ammonia based products;
• Baking soda, which we will scrub grease stains with a soft sponge;
• Alcohol or glass cleaner containing alcohol;
• Ammonia mixed with water in a ratio of 1 to 10.