Detergent for veneered doors. How and how to wash interior doors, wooden, plastic, glass, painted, varnished and metal from dirt, grease stains, stains and after repair: methods, tools, recipes, tips. How to wash

Greetings, readers of my blog.

Stains from water and grease, the appearance of scuffs on the surface - all these are the reasons for the loss of a presentable appearance. interior doors. Basically, stains appear around the door handles, as well as at the bottom of the door leaf at the point of contact with the legs. The problem of dirty doors becomes especially relevant with the advent of children or pets.

If the surface of the canvas is partially contaminated, then remove stains on doors won't be difficult. If the defects affect the entire surface, then you will have to resort to more radical methods.

Every normal hostess strives to maintain order and cleanliness in the house. But some surfaces are very sensitive to cleaning and in order not to make mistakes, you should follow my recommendations:

• for the manufacture of interior doors, directly or indirectly, wood is used that is afraid of high humidity. Even in the case of simple cleaning, you should not use a very damp cloth, which can lead to swelling of the canvas.
• to remove greasy stains from the door, do not use aggressive products such as acetone, thinner, alcohol.
• use a soft dishwashing sponge to remove the stain, not steel brushes. damaged MDF surface or laminated doors cannot be restored - you will have to change the canvas.

Secrets for removing stains from doors

Different materials for the manufacture of doors provide different variants to remove stains. But there are several universal ways bring back the beauty of the door:

• use acetic acid to remove green paint from a door
• Marks from the felt-tip pen can be washed off with white spirit or glass cleaner
• Some types of stains are well washed with vodka mixed with sunflower oil.
• A stain from chocolate or juice - it is well washed off with a baby wipe
• The stain from the varnish can be washed off with a cotton pad slightly moistened with acetone
• Coffee stains are perfectly washed with ammonia

As you can see folk ways there are a lot to remove stains from doors, but there are also professional detergents: Profoam 2000, Sif - paste, Mr. Chister, Adrilan, Pronto and many others.

How to wash doors - video

How to remove stains from MDF doors

For the most part, MDF doors with a veneer surface immediately after repair, I strongly recommend that you open them with polish. This will protect the surface from the appearance of greasy marks and stains. But if the problem has already appeared, then it must be solved.

I will share with you the method that my mother advised me. It has been used since the days of the USSR, when Mister Muscle was never even heard of :)

To restore the original appearance of MDF doors, you will need the following ingredients:

1. Potato - 1 pc.
2. dry rag
3. A little baby powder

How to remove a grease stain from a door:

1. Cut the potato in half and rub the stain until the juice appears
2. Leave the stain for 10 minutes
3. After the potato juice dries, starch will remain in place of the stain. Remove it with a dry cloth.
4. If, after cleaning, white stains remain in place of the stain, then we apply baby talcum powder to them and carefully wipe them with a dry cloth.

With the help of such folk method grease can be removed.

It is possible to eliminate contamination of doors from fiberboard with dishwashing detergent. To do this, we collect water in a small container and dilute the product in it. With a sponge, apply foam to the place of contamination and gently erase the stain. Rinse off the remaining foam and wipe the door with a clean rag.

Doors with laminated surface - cleaning methods

Thanks to protective coating from a laminated film, such doors are easier to clean than others.

Ways to remove grease stains from doors with a laminated surface:

• With laundry soap

First we prepare the solution. To do this, we need a piece of 72% laundry soap and warm water. We cut the soap into small pieces and prepare the solution.

We lather dirty places with a foam rubber sponge.

Now we wash off the soap stains and wipe thoroughly, leaving no stains on the door.

IT'S IMPORTANT TO KNOW!

The whole procedure must be done as soon as possible in order to prevent water from soaking into the door. Otherwise, the door will swell and the laminate will peel off.

• With the help of alcohol

IT'S IMPORTANT TO KNOW!

Do not try to use pure alcohol!

To start removing the stain, prepare an alcohol solution. It is prepared in a ratio of 1 to 9, where 1 part is alcohol, and 9 parts is water. Wet a cloth with the prepared mixture and apply it on the stain. We wait five minutes and remove the remnants with a dry paper towel.

How to remove grease stains from doors - video

Removing stains on wooden doors

Unfortunately, stains that appear on solid wooden doors require removal of the door leaf from the hinges for their subsequent removal.

Place the removed door on flat surface, having previously unscrewed doorknobs and .

With the help of a solvent, remove from the door old varnish. Due to the fact that the solvent has a pungent odor, it is better to work outdoors.

After removing the varnish, the wooden door must be sanded with grinder or sandpaper. It is better to use paper with a grain size of 180/220.

Then dust must be removed from the door. It is more convenient to use a soft large brush.

The final stage is the coating of the door with a new layer of varnish.

Removing Grease from Painted MDF Doors

For the most part, all painted MDF doors are covered with a layer of varnish. Therefore, the use of abrasive materials and aggressive stain removers is unacceptable. Damage to the top lacquer layer will cause tarnishing and damage to the integrity of the protective layer.

There are two ways to wash painted doors:

1. As in the case of chipboard doors, we will use 72% laundry soap. With a strong soapy solution, it is necessary to wash the place of contamination, then thoroughly rinse off the remaining solution and wipe dry with a paper towel.
   • citric acid

   We prepare the solution - for 200 ml cold water add two tablespoons of acid. After mixing thoroughly, wash off the stain with the resulting mixture. Wipe the treated area with a dry cloth.

   • With a solvent

   Soak a cotton pad in the solvent and carefully wash off the greasy stain. After removal, the surface is also wiped with a clean towel.

   • Detergent

   Add three tablespoons of detergent to half a glass of water. Stir and apply the resulting foam to the stain. Wait 3-5 minutes and rinse thoroughly. Wipe dry with a clean rag.

   • baking soda

   Mix three tablespoons of baking soda in a glass of water. The stain is washed off with the resulting solution. The surface is then wiped dry.

   Conclusion

   Well, that's all, friends.

   On this page of my blog, I shared with you my experience - how to remove stains on the door.

   if you have interesting ways then share with them in the comments.

   All success!

Interior and entrance doors are often contaminated with greasy stains. Moreover, depending on the surface, there are a lot of ways to remove such stains. In this article we will try to consider the most popular of them, depending on the type of material of the door leaf or platband.

Since we usually touch doors with our hands, fat is often transferred from the surface of the skin to the surface of the door. And for this, the hands themselves do not have to be oily, since our skin secretes fat on its own. At first glance, such traces may not even be visible, but over time, fat creates real dirty spots, as dust actively settles on it. Also, greasy stains can be from the contact of doors with various liquids, such as biological nature as well as chemicals.

Removal of grease stains from a metal front door

The metal is extremely unpretentious and you can clean it of fat with white spirit or acetone. There are no problems with the purchase of both, but what to choose? Practice shows that white spirit is still purchased more often due to the absence of a sharp characteristic odor, which is very familiar to us from acetone. Also, various cleaning powders with abrasive properties are suitable as an excellent method.

Removing grease stains from laminated doors

The laminated door is based on chipboard, or even plastic, which is covered with a paper layer with a pattern, on top of which there is a film. The latter does not have such strength as metal, therefore ideal solution in this case, it will be treated with alcohol, vinegar or citric acid. All that needs to be done is to wipe the stained surface with a cloth soaked in the above liquid, then wait a couple of minutes and wipe everything with a wet cloth. It is best not to delay with this, as leaving such components on the laminated surface for more than five minutes, you risk damaging the coating.

Removing oil stains from veneer and unpainted wood doors

It is worth remembering that the veneer is inherently a thin slice of natural wood. Consequently - greasy spots it is better to remove it from it as soon as they appear. In this case, microfiber, which perfectly absorbs fats, is perfect. It is clear that we cannot immediately find out that a greasy stain has formed on a particular surface, so wiping the most endangered places once a week will be an excellent prevention.

But, as a rule, already obsolete fat has to be washed, and in this case two options are suitable:

• Ordinary clay is mixed with table vinegar until a homogeneous mass is formed. Then it is applied to the veneered surface and left to dry. Completely dried clay is rubbed off the veneer along with the grease;
• soda and vegetable oil taken in proportions of 2 to 1. The solution is applied with a soft toothbrush to the surface of the veneer, after which it is washed off with a cloth moistened with damp water.

All of the above is also true for unpainted natural wood doors.

Removing grease from painted doors

In the event that the stain is fresh, it is best to get rid of it with a mixture of water and dishwashing detergent. Old stains are usually removed with vinegar. It is necessary to let the latter soak in, and then wipe it off with the same detergent. To avoid leaving marks, it is best to work with cotton wool or a soft cloth.

How to remove grease stains from a polished surface

If your polished interior door is covered in greasy stains, then potatoes or talc can come to the rescue. The last we just process the door for 20 minutes. As for potatoes, in this case the tuber is cut into two parts and the cut place is rubbed for the same time period.

By removing the talc, we can detect stains at the work site. In this case, flour will be the ideal solution, with which we, using a rag soaked in vegetable oil, will carry out additional polishing.

Lacquered surface - the biggest problems

It’s not easy to remove grease stains from a lacquered door. Old spots are deeply absorbed into the structure of the varnish, and they can only be removed along with the removal of the old layer of varnish and coating with a new layer. To do this, we do a few things:

• Removing the door from the hinges and removing all handles and other fittings;
• Covering the old varnish with a layer of wash. A layer of polyethylene is placed on top, after which the impromptu compress remains for several hours until the varnish under it turns brown;
• The softened varnish is removed with sandpaper or a spatula;
• The remains of the wash are washed off with water and vinegar;
• After drying, the door is re-lacquered. Up to three layers can be applied in total.

An alternative to this method of removing varnish is mechanical, when the coating is simply erased from the door leaf with sandpaper. This method is very labor intensive and time consuming.

As you can see, in the case of lacquered doors, which quite often divide rooms in our apartments, grease stains are a very serious problem and it is better to remove them as quickly as possible.

We give grease from glass doors

Glass doors are often used in our apartments. And on them smooth surface greasy spots remain especially frequent and stand out quite strongly. In the event that this is ordinary glass, then there should not be a problem. It is enough just to wipe it with a damp or soft (so as not to leave scratches) cloth moistened with alcohol and everything will pass. However, sandblasted frosted glass is a different matter, and it is much more difficult to remove grease from it. In this case, several methods are usually used:

• Soap and ammonia based products;
• Baking soda, which we will scrub grease stains with a soft sponge;
• Alcohol or glass cleaner containing alcohol;
• Ammonia mixed with water in a ratio of 1 to 10.

Wooden interior items always look beautiful and appropriate, no matter what style and design prevail in an apartment, house, office. Extend service life, clean any contamination, renew appearance or restoring a wooden product is quite simple, if you often wash interior doors, select harmless means for cleaning and polishing. In addition, there are many folk ways to eliminate pollution.

An interior or front door made of natural wood constantly requires cleaning. To do this, gentle detergents are selected without abrasive particles that can ruin the coating. The composition should not contain solvent, acid and other destructive substances.

When choosing a cleaning agent, you should pay attention to the inserts, which can be made of plastic, glass, metal. Besides, wooden canvas manufacturers cover with varnish or paint, this must also be taken into account when choosing a cleaning agent.

So, how to wash wooden doors from dirt:

• Silit - universal remedy with a convenient sprayer that is easy to apply on door leaf and erased with a small piece of cloth. To give a beautiful shine, you can use a piece of newspaper or a paper towel.
• Domestos and other plumbing cleaners will perfectly wash plastic inserts from contaminants of various origins.
• Mister Muscle is suitable for cleaning varnished wooden surfaces, stained-glass windows, glass, metal inserts. To do this, a universal remedy is purchased, which is easily applied to the contaminated areas of the door using a sprayer. Dirt is cleaned with an ordinary soft cloth or napkin.
• Dishwashing liquid is a foamy product that is perfect for cleaning wooden interior doors. It can be prepared from soap solution. You can use detergent in its pure form. It is enough to apply a small amount of gel on a soft sponge, rub the stain and wash it with a clean washcloth. The advantage of the method is the absence of streaks after cleaning.
• Polish Pronto, Weasel or Sana - the best remedy to remove greasy stains, fingerprints, dirt from the door without streaks. The advantage of such household chemicals lies in its composition. During cleaning, the wooden sheet almost does not get wet, so the risk of swelling disappears. natural material. Polishing can be safely washed wooden doors, varnished.
• Wedge or Blink perfectly dissolve grease stains and dirt from frosted and transparent glass on the doors, because they contain ammonia. Such tools can easily cope with the primer that has fallen on the surface. new door after its installation or repair in the house.

There are many similar cleaners and detergents made specifically for wood that can be found on the shelves of hardware stores. Enough to pick up correct composition, and the wooden door will delight with its glossy sheen and natural color every day.

Standard door cleaning scheme

Regardless of which detergent was chosen for cleaning interior or entrance doors made of wood, the scheme of actions is standard. To wash small contaminants, you should do some procedures in a certain sequence:

Such simple steps will help to clean dirt and greasy stains from interior doors in just 10 minutes.

For minor contamination, it is better to use gentle products. Many ingredients for their preparation can be found in the kitchen or in the first aid kit, it can be baking soda, table vinegar, lemon juice, ammonia, vegetable oil and much more. But with serious stains of dirt, only strong solvents, such as gasoline, can cope.

How to clean wooden doors at home, folk remedies:

• A solution based on vinegar and soda - great way get rid of stains on painted wood doors. To prepare it, add 20 g of soda, 15 g of hand washing powder and 50 ml of table vinegar to a liter of warm water. Wipe dirt off gently with a soft washcloth. Clean soda solution Works great on wood surfaces.
• Citric acid or fresh citrus juice. To prepare a cleaning agent, you will need 0.5 liters of warm water, a tablespoon of dishwashing detergent, 20 g citric acid or 50 ml of citrus juice. After mixing all the ingredients, it remains only to apply the liquid on the doors and dry the wood with a dry cloth. Solution from lemon juice and water (proportions 1:1) fights well with foreign odors and, which is relevant for people who have pets in the house.
• Ammonia quickly removes stains on painted doors. To do this, 10 ml of ammonia is diluted with 500 ml of warm water.
• Vegetable oil will help get rid of traces of whitewash on the doors after repair. To do this, 2 liters of water are mixed with 50 ml of the product. The advantage of this cleaning method is the absence of streaks after washing. As well as sunflower oil fights well with or glue. To do this, the product is applied to the places of contamination in its pure form and left for 2-3 hours. Then wipe the surface with a dry cloth.
• A hair dryer and a pencil eraser also do a great job of removing glue or sticky tape marks. It is enough to blow hot air on places with dirt and rub them with an eraser or a napkin.
• Fresh potatoes can clean interior doors from old stains and fat. It is enough to cut the root crop in half and rub the dirt with a cut. After that, you just need to blot the spot with a dry cloth.
• A mixture of clay and vinegar (proportions 1: 1) does an excellent job of removing difficult dirt on wooden surfaces. After such a tool, the door is wiped with soapy water and polished with a dry cloth.

After installing an interior or entrance door made of wood, mounting foam may remain on the canvas. You can eliminate it with kerosene or alcohol. It is enough to apply a small amount of the product on the stain and wipe it with a cloth. These solvents can be used to wipe off oily or water-based paint caught on the door leaf. You need to use such products carefully, they should be applied with a cotton pad or a small piece of cloth.

After rubbing the dirt, immediately wipe the wood with a dry sponge or cloth.

Further care

Constant cleaning of entrance or interior wooden doors can damage the protective layer. Even regular use of gentle detergents is fraught with scratches, chips, because wood is a capricious material. At least once a week, the hostess will have to use radical methods for caring for wood products.

The most popular means include:

• Polish, which perfectly fights not only dirt, but also small scratches. This tool is intended for the care of wooden surfaces, removing dirt and grease stains.
• Wax pencils are an excellent tool for restoring damaged wood. For these purposes, you can also use ordinary wax, which copes well with scratches, cracks and chips. Of course, it is better to use such tools only for doors that are not varnished, since their use has a certain sequence. First you need to sand the damaged areas with fine-grained sandpaper. After that, the wax or pencil is rubbed into the crack, scratch, chipped area. The last stage of restoration is grouting this area with a piece of soft cloth.

The use of wax is a step that often precedes varnishing a wooden door. Due to the soft texture and transparency of the product, you can even out damaged areas and save natural color wood.

Coating a wooden surface with varnish

After the natural wood door has gone through polishing and leveling with a wax pencil, you can start coating the surface with paints and varnishes. Instead of wax, you can also use nitro varnish in the form of a spray, which has the same effect, but dries in just 5 minutes.

The advantage of lacquer coating is the ability to preserve the original appearance of the product. The transparent product allows you to preserve the natural pattern of wood and create a reliable protective film. It is necessary to update interior doors in this way as needed (after the appearance deep scratches or cracks).

Ways to extend the service life

Caring for wooden interior doors consists not only in constant cleaning or coating with paints and varnishes, but also in extending operational terms products.

To do this, it is necessary to constantly check the performance of the loops, maintain the desired temperature, humidity level in the room, etc.

The necessary measures include:

A door made of natural wood is an environmentally friendly, durable, incredibly beautiful piece of furniture that can fit into any design and style.

If you select gentle cleaning products, properly care for delicate surfaces, then they can serve their owner for decades, because a wooden front or interior door is the face of the whole house.

Carrying out general cleaning activities affects all aspects of life. We remove dust from all surfaces, wipe floors and, wipe windows and Appliances. Among standard procedures so just as important, but less frequently performed processes are lost.

Today we will talk about doors, or rather, what means to wash them and how to do it. We will provide answers to the most popular questions in the field quality care behind the door leaf, glass and fittings.

Doors are an integral part of our home

Basic moments

Interroom doors no less than other items in the apartment accumulate dirt and dust. This is especially noticeable if the door leaf is not monolithic, but has various carved details, glass. On the bright doors, traces of dirty hands immediately appear, and the fittings are covered with a sticky layer of dirt mixed with dust.

Eco-veneer is especially vulnerable to pollution, because by and large, it's just a textured film, which is pasted over the canvas. Eco-veneer film is produced in different countries, enough quality material obtained from Koreans, Japanese, Italians.

In order for the door to please us with its cleanliness and to be pleasant to touch, you will have to take care of it during operation. In addition, blind canvases are not so popular now, because the door is most often an integral attribute of the overall picture of the interior of the room, therefore it should be colorful and beautiful, and therefore clean.

Doors support the interior of the room

Let's highlight the main points in caring for doors:

• It is necessary to devote time not only to washing the door leaf itself, but also to cleaning and adjusting the fittings. If it is loose, it is necessary to tighten it, if it creaks, grease it.
• If you have doors made of natural wood or solid wood installed in your house, it is worth adjusting the microclimate in the room. It is undesirable to allow the temperature to rise above 25 ° C, and humidity more than 70%.
• Severe damage to quality doors it will not be possible to hide, there is no way to hide any scratches or dents, so try to take good care of the material.
• In case of contamination and staining, try to wash your interior doors immediately, it is better not to wait for the dirt to absorb into the structure of the material.
• The old doors are not best quality, or a modern eco-veneer, can be additionally protected from pollution by varnishing. Not the smartest way out, but accessible to everyone.
• During repairs, close the doors with polyethylene, like other pieces of furniture, so as not to get dirty.

Doors are made from different materials: pvc, laminated, eco-veneer, natural veneer, solid wood. For each material in ideal mine detergent composition or just pure water. To properly wash and clean the canvases, you can use the following tips:

When cleaning, pay attention to door fittings

• Many modern doors equipped with glasses to wash them without smudges and streaks, add a couple of drops to the water ammonia, provided they are not matte.
• Metal parts on the doors are well washed with ordinary soapy water.
• In order not to spoil the door covering, it is best to wash and wipe the surface with a soft cloth, such as suede or microfiber.
• On decorative inserts and carved elements of doors, dust will certainly accumulate, so do not forget to remove it during the weekly cleaning of the house.
• Finishing washing the door leaf, pay attention to the fittings, wash and disinfect the handles.

Most often, the door fails, or loses its aesthetically attractive appearance due to our fault, due to mistreatment and lack of proper care. But we want the door to serve us faithfully long time, so we choose suitable remedy and we will wash it.

Detergents

Means for washing doors are selected taking into account the material from which it is made, the degree of contamination and the presence of decorative elements on the surface of the canvas.

Universal detergents sold in the form of a spray are very popular. They are very convenient to use, they do not have pronounced chemical odors and help to clean surfaces of different quality from stains and other contaminants: glass, wood, pvc, eco-veneer. You can purchase detergents for a specific type of door covering in the same stores that you bought your doors for.

White and bright doors needs more care

Wooden doors require more attention than veneer or eco-veneer sheets (3D films). They don't like huge amount moisture, so when carrying out wet cleaning keep the cloth slightly damp. Wooden doors can be rinsed with normal water, without the use of detergents, but in most cases dry cleaning will suffice. To protect the fabric from dirt, use a polish.

Among the folk detergents with which our compatriots are trying to wash the doors, the following compositions can be distinguished:

• Dishwashing liquid does an excellent job of removing dirt from the surface of the veneer. Eco-veneer can also be wiped with a similar surfactant composition.
• Grease stains can be removed with a potato, for this a fresh potato is cut in half and the stain is rubbed with it. After removal, rinse the cleaned area with plain water and wipe dry with a cloth.
• For solid wood and natural veneer doors, not particularly fond of wet cleaning, housewives found good way removal of oily and dirty stains. Talc is poured onto the dirt, it absorbs dirt, after which it is washed off with a dry cloth.
• To add shine to a veneer door, clean water used for washing can be added apple cider vinegar. Approximate proportion: 1 tablespoon per liter of water. Some types of eco-veneer can also be processed with such a composition.

Do not forget to remove the detergent from the door after washing with clean water and then wipe dry. Do not use abrasive cleaning products and compounds: brushes with iron bristles, washcloths, washing powders, with such a tool you will definitely spoil the decorative surface.

Glass work

If frosted or ordinary glass is inserted into the door, it is worth starting to wash the door from it, and only then go directly to the canvas. Smooth glasses are washed with ordinary soft rags with a minimum amount of lint, frosted glasses can be rubbed with a brush with soft bristles.

Frosted glass is produced by sandblasting. From a smooth surface with the help of sand it gets off upper layer, from which the glass takes on a cloudy appearance with a frosty effect. Frosted glass allows you to hide what is happening behind the door from a distance of 30-40 centimeters.

Frosted glass is perfectly washed from greasy stains and fingerprints, using dishwashing liquid or starch solution. To prepare a solution, warm water starch is added, 3-4 teaspoons per 1 liter.

If desired, you can install all-glass doors in the house.

Complex, stubborn dirt is removed with alcohol, acetone, nail polish remover based on it. Frosted glass does not lose its decorative qualities. However, when working, make sure that drops of solvents do not fall on rubber elements box seal or silicone filler next to the glass.

Solvents, gasoline, ammonia do not need to process frosted glass. Also, you don't need to scrape over them. sharp objects, for example, to chip off traces of silicone.

If there are some defects on the door, they can be masked with a polish. If cracks and scratches wear more strong character, then hide them will help. Choose the right shade for your door, and rub the pencil into the surface of the canvas, let the wax fill in its flaws.

While maintaining proper cleanliness in the apartment, you will have to take care of your doors one way or another. Make sure that they always look clean and tidy, because there is nothing complicated about it.

Door cleaning- the ability to maintain an attractive appearance and integrity of the coating on for a long time. At the same time, care should be regular and correct. Doors, like any other household items, need cleaning. For this purpose, suitable cleaning agents are specially selected depending on the material of the door surface, its color and some other parameters. Let's figure out how to properly care for the interior and front door.

• before washing, adjust the doors;
• grease special means locks and hinges;
• make sure that the room has a humidity of up to 65% and a temperature of up to 24 degrees;
• remove any fresh stains from the door surface as quickly as possible, without delay;
• cover door structure varnish, especially if it is a low-quality canvas;
• close the doors with foil if repairs are planned;
• in general, you need to use the door very carefully so that you do not have to try to repair serious dents or deep scratches.

Choose the right cleaning agent. In particular, veneer and natural wood cleaned completely differently. If this is not taken into account, there is a chance of hopelessly spoiling the door covering. In addition, it is recommended to consider such tricks:

• cool water with a few drops of ammonia, wash the glass in the decorative rates in the door;
• use a soapy solution to wash metal door elements;
• wipe the doors only with soft cloths;
• get special microfiber cloths for cleaning doors;
• once every 3-4 days, wipe the decor elements, handles and inserts of the structure from dust;
• use disinfectant(a weak solution is sufficient).

The main reasons leading to the fact that the door covering loses its aesthetics is insufficient or improper care, careless handling of the door.

Important! Sprays, aerosols and products specially designed for this are excellent for cleaning the door. They are applied to the door covering through a spray bottle, allowing you to wash off any dirt.

The fight against fat

Fighting grease on wooden doors is a must, especially if they are located in the kitchen opening. Easiest to use folk remedies that are effective and safe to use. You can give preference to the following methods:

1. Use a solution of water and surfactant or dishwashing detergent if stains need to be removed. The method is effective for wooden and MDF doors.
2. Use a raw potato slice if you need to quickly get rid of greasy drips or stains. In conclusion, the area is wiped with a slightly damp cloth.
3. Mix clay and vinegar in equal proportions. You should get a mixture that resembles gruel. It is applied to the stain and wait for 20-30 minutes. After that, it remains just to wash it off. This method effectively fights stains of any type, including greasy traces. For the most serious contamination, you can repeat the cleaning procedure 2-3 times. The method is suitable for cleaning unpainted wooden doors.
4. Sprinkle talc on a napkin and press it against the stain on the door for 5-10 minutes (you can use tape). After this time, brush off the talcum powder from the surface of the door and wipe the surface with a dry cloth.

To restore the glossy shine of the surface, you need to wash the door with a solution of water and vinegar (1 tablespoon of the product per liter of water is enough).

Remember that all solutions must be washed off the door surface with cool water. In conclusion, the door leaf is carefully wiped dry. The use of metal brushes, hard sponges and products containing abrasive substances is unacceptable.

It is important! By the way, getting rid of dust is very simple. To do this, it is enough to wipe the door leaf with a dry and damp (but not wet) cloth. In conclusion, it needs to be polished using a door polish.

glass cleaning

Glass cleaning is not the best simple task. It always seems that you can easily wipe the glass insert on the door, and it will shine with cleanliness. In fact, there are always divorces, which are a real problem to eliminate.

1. Onion juice or soapy water will help remove greasy stains.
2. The matte surface can be washed with a starch solution (you need to add 20 grams of starch to 500 ml of water).
3. Alcohol, thinner, acetone, and even nail polish remover can quickly get rid of traces of glue, coffee, and tea. However, you need to act carefully so that the funds do not come into contact with the box, rubber seals, as well as the skin of the hands.

It is not necessary to use alkalis, acids, gasoline and concentrated ammonia to clean frosted glass. Scraping dirt with a knife or scraper is taboo.

It is important! First you need to clean the glass inserts of the interior door, and then the door leaf.

Tips for caring for an iron front door will help keep it clean:

• cloth soaked in hot water, get rid of traces of adhesive tape;
• acetone-containing liquids will help get rid of old tape residues;
• white spirit or other solvent will help remove traces of paint;
• sandpaper will help get rid of traces of lime and whitewash (you can not use this method for cleaning iron doors with vinyl or leather covering);
• a solution of vinegar will help to cope with stains and traces of whitewash;
• a solution of water and kerosene will help remove plaque;
• products that contain acetone or alcohol will help get rid of polyurethane foam which has not yet hardened.

How to clean plastic?

How to clean plastic? It's very simple. It is enough to use soapy water. You can give preference to other of the above compositions, but in most cases there is no need for this, since all contaminants are easily wiped off.

You can also use vinegar solution, liquid washing powder, soda. Special sprays and cleaners for plastic surfaces are effective for cleaning.

It is important to consider that plastic cannot be rubbed, washed with metal sponges, rubbed with a brush. This leads to its damage, the appearance of microcracks, into which dirt is subsequently clogged.

What about defects?

Defects that may appear on the door during use can also be dealt with. In particular, it is recommended to listen to the following tips:

1. Use sprays that contain beeswax, and polish to get rid of small cracks and barely noticeable other defects.
2. Use a special wax pencil suitable colors to repair deep scratches. It is enough to rub the damaged area to fill the void of the crack.

Caring for doors is a feasible task for everyone. The procedure is not complicated and does not require serious economic costs. Regular care- the ability to extend the life of the door surface, take care of its aesthetics.