How to hang a garland on a window. The main types of fasteners. How to hang a garland on a window: mounting methods and types of garlands How to decorate with electric garlands

Coming New Year and want to create good New Year spirit in home. One way is to hang various new Year decoration. One of these ornaments is garland. In this New Year's article, I want to tell you how to hang garland on the window and how to calculate the required length Garlands.

In order to hang a garland on the window you will need:

  1. Hooks for garlands, the same as shown in the photo below or similar.
  2. A thread-type garland is when there are a lot of light bulbs on a long wire.
  3. Roulette or ruler.
  4. Super glue.
  5. Pencil.
  6. Any degreaser, such as alcohol.
  7. Calculator, but you can do without it.

I used special transparent hooks for garlands, bought them in bulk hardware store in the fastener section. If you plan to remove the hooks after the New Year, use double tape or the self-adhesive strips that come with the kit instead of super glue. The advantage of such hooks is that they are not visible, and they do not spoil at all appearance window.

This is what the hook looks like garlands on the side.

The garland is hung on the window snake, with the help of hooks, it will pass several times along the window with a certain interval. How it looks, you can see in the photos below.

First, measure the length Garlands(the length of the part with the bulbs). We measure the height of the window, or rather the distance between the future hooks vertically, it will depend on where you decide to stick the hooks, on the glass or at the base of the frame. We also need the length of the window. Knowing these dimensions, you can use the formulas given to calculate required dimensions. Below I will use the dimensions of my window and Garlands.

The length of my Garlands about 6.65 meters (180 bulbs), the height of the window is 1.25 meters, and the length of the window is 46 cm. Garlands Enough for 5 passes. So I need 10 hooks. The distance between the hooks will be 10 cm, then I can fully use the length Garlands.

We make an indent from the beginning of the window 3 cm and put the first mark with a pencil, put the next 4 every 10 cm, as shown in the photo.

We perform similar actions for the upper part of the window.

Now it is necessary to degrease the surface at the place of gluing the hooks and the hooks themselves for garlands. This is done for a more secure bond. After that, we apply glue to the hook and stick it on the selected place next to the mark. It is necessary that the lower hooks look down, and the upper ones look up. After all the hooks are pasted, you can erase the marks.

We are waiting for the glue to dry and proceed with the installation. hang a garland we start at the top if you, like me, have an odd number of segments, and from the bottom if there is an even number. We start on the opposite side of the outlet.

Repeat this action with all hooks.

In the end, it should turn out that part garlands with light bulbs will end exactly on the last hook, from the bottom of the window on the side of the outlet.

Like this garland looks after installation on the window.

After switching on garland will illuminate the entire window, and delight others, creating a New Year's festive mood in the house.

Calculation of the length of the garland.

Silent math for those who love precision. Let's start with the length Garlands. Calculate how long you need garland, if we know how many vertical approaches Garlands want to do:

where, L– required length Garlands, cm; h– window height, cm; n- how many times garland will pass along the window, l - window length, cm; 6 - this is the accounting for indents from the edges of the window, see Fig.

The usual stereotype that it is possible to decorate the windows of an apartment or a private house only during the New Year and Christmas holidays has long been destroyed. contemporary designers interiors. And, really, why should the house be beautiful and cozy only for the holidays? Meanwhile, you can bring the attributes of fun and joy into your everyday life, thus, cheer up not only yourself, but also all household members. Everyone can cope with decorating the window openings of their home, regardless of the type of profile from which the structure is made.

An ordinary garland may well be a means of decoration. You just need to take into account a few nuances:

  1. type of window construction profile;
  2. type and size of the garland;
  3. window opening type.

It is quite possible to make such an ornament on your own, but it is better and more practical to buy it ready-made in the store, domestic and foreign manufacturers I offer a wide range of these products.

Kinds:

  • string light - LED linear;
  • ice light - fringe imitation;
  • no light - web;
  • rope light - LED duralight in the form of a cord;
  • motif - various thematic figures.

It is these types that are most often used to create bright interior premises. Each of these types is no doubt good in its own way, but most often you can see no lights on the windows of establishments, private houses and apartments. What it is? It's simple - it's a garland mesh on the window. This design can harmoniously fit into almost any interior, add zest and special charm, you just need to securely and correctly fix it on the window.

It can be bulky or elegant, heavy or light, and it is on these parameters that the choice of the method of its fastening depends. After all, the most important thing in this process is to attach it safely, beautifully and in such a way that it does not interfere with your use of the window.
First of all, you need to think about the fasteners - they must be safe and reliable. Under no circumstances should it be used for this purpose. electric wires or other elements that may simply not withstand the severity. If the garland is light, it is quite possible to use Double-sided tape. You should only pre-wipe the places where it will be attached with alcohol, if we are talking about metal-plastic windows.
Not less than practical option commits decorative ornament a special gun that works with hot glue can become on the window. This device will quite reliably fix the garland on the window frame or on the glass. They can perform fastening as accurately and quickly as possible.

It is not necessary to attach it to a frame or glass. A perfectly acceptable alternative would be a cornice mounted on the wall of the room. In this case, you can tie the garland directly to it using ordinary threads or cords. This method is the most practical and successful, as it allows you to quickly and easily remove the decoration if necessary.
With wooden windows much easier - you can always attach the decoration to the frame with small carnations.

DIY garland on the window

For a creative person, making such an element of decor on their own is not difficult. Moreover, absolutely any material can be taken for this, just do not experiment with electricity. To decorate a window opening, you can use ribbons, braid, colored paper, foil, large beads and so on, in general, everything that you consider necessary and appropriate for decorating the interior of a room. A flight of fancy in this case is quite appropriate. In the process of creating such jewelry, you need to be guided by the basic principles design art, the result should be a decor element that harmoniously fits into the interior of the room and will fully comply with its style decision.

The garland is a great Christmas decoration. It pleases both children and their parents with its appearance, brilliance and brightness of multi-colored light bulbs. All those who have ever used it as christmas decoration, understand that it not only fabulously transforms the home, but also contributes to obtaining special joyful emotions. The mood rises. Isn't that what each of us dreams of?

Schoolchildren and their parents are wondering how to hang a garland on a window, especially if there are no bolts on it, as is the case with a plastic window? This is what will be discussed in our article.

We all dream of a cozy and comfortable home where we want to find peace and positive emotions. It is the flashing or burning lights of the same color that give the room a unique flavor and help to calm the nervous system.

A garland on the window always ennobles the appearance of the apartment. From the street, the window shines invitingly and fills the yard with beautiful bright light. In the evenings, multi-colored lights beckon and attract the views of passers-by. When you look at such a radiance from the street, you understand that those residents who live in this apartment love comfort, wisdom, peace and a special flavor of the winter holiday.

Another important advantage of the garland is that it can be adjusted to a different blinking frequency. It all depends on the mode you set. And you choose it yourself, depending on your internal state and the desired result: you need to calm down or, on the contrary, cheer up.

Types of garlands

  • light thread. It is with its help that it is easy to decorate the Christmas tree. It supports various flashing modes. The controller sequentially switches these modes;
  • light grids. Ideal for graceful design window openings;
  • static-dynamic garlands, or fireworks. Imitation fireworks. Metal carcass with a solid cord - this is their complex design;
  • duralight. It's colorful long cord. It is quite convenient when creating high-quality inscriptions and voluminous figures;
  • led fringe.

Many parents wonder how to hang a garland in the room. The main requirement is to mount it safely, reliably and beautifully.

Consider mounting options

  • double sided tape;
  • glue;
  • nails;
  • paperclips;
  • using different hooks for which you can attach our decoration on windows and walls;
  • special glue gun;
  • clamps.

How to hang a Christmas garland on the window

  • We repeat the most important current rule - safety and reliability of fastening.
  • It is important to responsibly approach the choice of suitable fasteners. If the garland is bulky, then we use nails. If it is light, then you should buy glue or tape.
  • If it is possible to nail very small carnations into the wall and use strings to hang a garland on the window, then this option will be quite simple and at the same time safe. It can be used for both windows and walls.
  • A special glue gun will help professionally and quickly cope with a fairly large selection of bright products that need to be attached to any object.

Question how to hang Christmas garland on the window, solved. The main thing is the choice of suitable fasteners and the type of garland itself. This is how a real New Year's Eve coziness is created in the house, giving all household members a feeling of pleasant expectation of miracles and magic.

Trust in choosing a garland to your taste. Happy shopping!

How to decorate a window with a Christmas garland

Bright glowing garlands are a must new year days. The windows, shining with multi-colored lights, create a festive mood. Decorating your apartment in this way is quite simple. Need to choose suitable look garlands and hang, fixing it well on the window.

Types of garlands

Now in stores you can find many various kinds electrogarlands. They can be made in the form of a simple cord with light bulbs, a beautiful openwork mesh or be figures - attributes of the new year. To choose the best option for yourself, you need to consider all types of jewelry.

Before going to the store, think about exactly how you will decorate the window with a garland. You can run a single cord along the top of the eaves, lay it out with a snake, or close the entire window with a shimmering fringe. The LED mesh shimmering with lights looks very nice.

Pay attention to what kind of light elements are present in the accessory. It can be ordinary small light bulbs. As a rule, they are equipped with simpler and inexpensive models. The garland can run on LEDs, which are the best option.

They are more economical than simple light bulbs, burn out less often and tolerate exposure well. external factors. This is an additional plus if the decoration will hang from outer side window.

More accessories differ in cord length, configuration and technical parameters. Measure the length and width of the window where you want to hang the garland in advance. This is necessary in order not to purchase a model that is too short or too long.

Electric garlands are of the following types:

  • Single thread. It is a cord with light bulbs attached to it, which can operate in several modes. Light elements are often hidden inside the cases various shapes(snowflakes, stars, etc.). This is the most common type of garland, which is suitable for decorating windows, interior parts, Christmas trees, etc.
  • The light grid is made in the form of intertwined wires. The grid has sufficiently large parameters in length and width. Often used to decorate shop windows and large windows. The LED mesh covers the entire opening, so the window does not need to be additional decor.
  • Light fringe. It looks like vertically hanging threads with diodes mostly of the same color. Threads can be various lengths with a certain distance between them. Short garlands decorate the visors of buildings, and longer ones with a small interval between the luminous wires - windows and doors.
  • Flexible luminous tube - duralight. With it, you can make inscriptions and various shapes.

When determining the length, keep in mind that the decoration will sag a little under the eaves, and will not stretch into a string. If you decide to decorate the window with a thread garland in the form of a snake or zigzags, you need to calculate the length of the wire in advance. Light mesh is also available in certain lengths and widths, so check the dimensions before purchasing.

Embellishments such as mesh and fringe are great option for window opening. The grid completely fills the space, which looks very beautiful and spectacular. This is a self-sufficient decoration, so there is no need for additional frame decor.

Keep this in mind when decorating the window area. Do not stick figures on the glass and draw on it. This will give the impression of congestion.

How to fix

There are several ways to attach a garland to a window. The choice of means for fastening depends on how voluminous and heavy the decoration will be. The material from which the frames are made also matters. If you have chosen a type of decor such as mesh or fringe, you need to make sure that the fastening is secure. Otherwise, the decoration may fly off, hitting something along the way.

When you want to decorate a window with with the help of a light garlands in the form of a single thread, it can be hung by attaching to regular tape. This method works well if the cord runs along the curtain or hangs from it. Tape the ends of the cord on both sides of the curtain with transparent tape. This will securely fix the decoration.

If the accessory is very light and has a short length, you can decorate the window prem with it by gluing the ends of the wire to double-sided tape. This tool is suitable for those who have plastic frames. Wrap the ends of the garland with tape to prevent them from peeling off.

To those who have wooden frames, you can use the metal buttons. You just need to stick them into a tree, and then attach a garland to them. This is useful if the decoration is quite light.

A fairly reliable method of fastening can be considered special hooks, which are sold in hardware stores. With reverse side Hooks have a sticky side that adheres well to any surface. In order to fix them on the frame, you need to remove the protective layer.

The use of hooks is very convenient. To decorate your window, you just need to hang the ends of the wire on them. There are also hooks on transparent suction cups. They stick pretty well to smooth surface plastic frames. If you are hanging an accessory such as an LED mesh on the window, you will need to glue the hooks across the entire width of the frame.

To decorate the window frame with voluminous and heavy structures, such as a light grid or fringe, you need to mount them on something more reliable. If your interior allows, you can hammer in a couple of small, thin studs on both sides of the frame, as well as a few in between. The cord is attached directly to the studs or tied to them with threads (adhesive tape).

If this is not possible, there is another option. Stretch a fishing line or strong cord from the sides of the window, securing the ends in a place convenient for you. It should run along the top edge. window frame or in the cornice area. Then hang a garland on it. Wrap the ends of the wire well with tape.

Before decorating your window with a garland, check if it works. Switch between different modes to make sure everything is in order. Make sure all lights are on.

Look for damage on the wire. This is important point since you are dealing with electrical appliance. It may burn out or ignite.

Before you start hanging a garland, look for the nearest outlet. If the end of the wire does not reach it, you will have to use an extension cord to decorate the window.

Position the mode switch for easy operation. It should be located in such a place so as not to reach up, risking knocking over the entire structure. Do not place it on the floor, otherwise it may be damaged by accidental stepping on it.

In order to secure the garland with high quality, consider in advance the type of design of the window opening and the method of fastening. Observe safety precautions when working with electrical equipment. Prepare for the holiday in advance so as not to fuss at the last moment.

http://hozobzor.ru

And in anticipation fabulous holiday I want to fill my house with magic. Design options depend on the imagination of the owner and his financial condition. But it is not at all necessary to purchase prohibitively expensive decorations and decorations, a magical atmosphere can be made with improvised means, for example, garlands. You will learn how to hang a garland on a window and other possibilities from this article.

Surface decorations

The best option for home decoration are garlands - it is beautiful, compact and gives the room an atmosphere of magic. Designers recommend giving preference to window openings, and not the walls, since the window immediately attracts attention, and a few accents in the room are not always a good solution.

Garlands for decoration

Before choosing from a variety of garlands, it is worth determining how you want to decorate window openings. One idea for hanging a garland on a window is to use homemade decorations.

Do not forget also that the window can be decorated with ordinary paper garlands. If you approach their creation creatively and responsibly, then the result can be no worse than purchased jewelry. Hanging a handmade garland on the window, as practice shows, is not difficult: you only need a good adhesive tape. Home decor, as a rule, is made of lightweight materials, so it is not difficult to attach it.

Ways to decorate with electric garlands

If you decide to decorate the windows with an electric garland, then you need to decide on its type and type of fastening. If the choice fell on an ordinary garland, then, unlike the others, already ready-made options(mesh, curtain, etc.), you can turn on the fantasy: make a wire frame and wrap it using tape or electrical tape. You can also directly attach the resulting figure to the surface with tape or carefully with pushpins.


If your option is a grid, the question is how to hang a grid garland on plastic window, is easier to solve. It is necessary to estimate the weight of the mesh - perhaps it is enough to use the most ordinary adhesive tape for fastening (or decorative - at the discretion). It is better to attach to the frame, since traces may remain on the glasses, which will later have to be cleaned off, and adhesive tape with plastic surfaces easier to clean up. In hardware stores you can find adhesive hooks - they are also convenient to use for fastening.


If the mesh is heavy, it must be fastened securely: one tape is not enough. To fix heavier and more bulky garlands, stronger artillery is needed, for example, wire, liquid nails, glue or a glue gun, a large number of hooks. It is possible to create a homemade mount.

The algorithm for how to hang a garland on a window is as follows:

  1. Prepare pre-braid and adhesive hooks.
  2. From the braid, make a ribbon with loops at a short distance.
  3. Glue the hooks to the frame.
  4. Attach the ribbon to the upper edge of the garland (best with threads) - the result should be something like a curtain tape.
  5. Thread loops onto hooks.

In this way, you can hang the grid on a plastic window. If you change the fastening algorithm a little, this will be the answer to the question of how to hang a curtain garland on a window. In this case, to securely fasten heavy products to the curtains, you can use wire: instead of adhesive hooks, make them yourself from wire. Fix the resulting hooks on the eaves (for example, glue gun) with outside, stringing loops on them, and the garland-curtain will hang over the curtains and delight you.

A few nuances

As soon as you wondered how to hang a garland on the window, then a logical continuation will follow - how to attach it, but do not rush and get all the supplies of home illumination. First you need to decide on some points. Firstly, an electric garland is a device, which means it is a potential fire hazardous object. Do not forget that it is better to avoid contact between wires and curtains, their interweaving, switches on the floor and lengthening the structure with an extension cord. Secondly, prepare in advance for this event and take everything you need right away, since it will be inconvenient to run back for details. Thirdly, make sure that the type of fastening you have chosen will withstand the structure.

Summing up

Scotch - universal and most cheap option mounts. Suitable for light garlands. Disadvantage - leaves traces.

You will have to look for adhesive hooks in hardware stores, spend money, but this will make it easier to mount on windows.

Wire is an option for heavy garlands.

Pushpins - if the frame is wooden, you can attach a garland using the most common buttons.

Glue gun, liquid nails are also used for heavy structures.

Decorating your home with garlands is not difficult, especially since many fastening elements are often at hand. And if you wish, you can come up with your own version of decoration, bringing a sense of celebration to the house.

Fitting © 2022 Design and interior of apartments