Paint window frames. How to paint a wooden window frame. Technology and subtleties of coloring the frame. Paints suitable for wood application

Although many people today put PVC windows in their homes, but most people, especially in wooden house and in old apartments, leave wooden windows. Wooden frames require periodic painting. In order not to repeat this process annually, you should take it responsibly, prepare all materials and tools in advance.

In home repairs, wooden frames are the most labor-intensive section. From the street they are affected sunlight, rain and snow, and from the room - a higher temperature, compared to the street, dry air, water condensate. In addition, bugs often start in a wooden frame, fungus and mold develop. To avoid any trouble, you need to keep the order of wood processing and paint according to the rules.

Materials and tools for painting a wooden window

Repair of a wooden frame begins with an inspection of them. current state and preparation of materials and tools. To paint old windows, we will need the following items at different stages of work:

Scraper
Grinder or drill with a special nozzle
Roller
brushes
Putty knife
Sandpaper with coarse and fine grit
metal sieve
masking tape
Newspapers and film under the window
Dust cleaning cloth
Trays for paint
Primer
Putty
White Spirit
Dye
Solvent
Step ladder or stable chair, stool
Hammer, chisel, screwdriver, nails

Don't forget about necessary ways impact protection harmful substances: mask, goggles, gloves, headgear.

For painting wooden frames from the inside, oil-based alkyd paint is usually used, and from the street - acrylic, for outdoor work. However, you can use paint for outdoor work on both sides of the frame, but what kind of paint to paint the windows - domestic or imported - depends on the cost of repairs and the owner's preferences.

Preparing for painting

In order for the frames to last longer, you need to choose the right time. Neither the scorching sun nor the rain and snow should interfere with us, because ideal conditions for repairs - a warm spring day without bright sun, when there is little moisture, and ultraviolet is not able to destroy the paint structure. Frames dry well at temperatures above five degrees Celsius and humidity below 80%. If paint is applied to wet surface, bubbles will appear on it later, and the work will have to be done again. The paint also peels off due to dampness, poor cleaning or an unsuitable primer.

We will prepare wooden frames for painting in several stages.

We remove the old paint. For this work, we use a scraper and sandpaper with a large grain. Let's check how easily the frame closes, if there are problems, use grinder or a drill with a special nozzle. BUT you have to be careful! Can't be damaged wooden base frames!

Today there are special liquids for removing old paint. This greatly speeds up the process of preparing frames for repair. There is Finnish Tikkurila Maalinpoisto, Ukrainian Shostka, Svema. You can find it in car dealerships (it is used for cars). We apply, wait until the paint wrinkles and turns into a curdled substance, clean it with a spatula, and process it with coarse-grained sandpaper.

It is better to remove window fittings (and window sashes too) before painting at all, so that later the window looks neat, if there is something that needs repair, it must be replaced and corrected in advance. If it is problematic to remove handles or locks, you can paste over them with masking tape, protecting them from accidentally getting paint.

We also carefully prepare the glass. If earlier the question of how to paint wooden windows was not before you, seal all the glass with newspapers and masking tape on the sides, stepping back 2 mm from the edge so that the paint gets into these narrow cracks and does not allow water to accumulate here. Experienced craftsmen usually use only adhesive tape around the edge of the glass.

Throw away the old glazing beads holding the glass, if possible. New ones are painted separately from the frames (also cleaned, sanded, primed) and ready-made ones are nailed with carnations.

Putty and primer of a wooden window

Let's take a closer look at the wooden frame. All parts that can rust and spoil our repair are pre-treated with a primer for iron (these can be stud caps, hinges, etc.).

antiseptic (eg. linseed oil) - an obligatory part of the preparatory work before painting. This treatment prevents the wood from rotting, the development of fungus and does not allow insects to settle in your home.

Got rid of the old paint and treated the frame with an antiseptic? Now let's take a closer look at the surface of the window. All cracks, pits and potholes must be filled. This should be done gradually, because thick layer putties will simply fall off along with fresh paint, and the repair will have to be started again.

The putty should be special, for wood, on an acrylic basis, usually it comes in jars of 200 gr. Good alkyd putty Lakkakitti. If we paint the frames, we simply put the putty on the surface, if instead of paint we use a stain, all putty places will be visible through it, therefore, first we tint the putty with a color scheme to match the color of the wood. You can make this finishing material yourself from wood flour (superfine sawdust) and glue or epoxy.

After the first application of putty, we clean the surface sandpaper, grind and remove dust with a damp cloth. After an hour or two, after it dries, we level the surface with fine-grained sandpaper, remove dust with a rag, once again carefully examine the frame and, if necessary, again apply a thin layer of putty where necessary. The process is repeated until a perfectly flat surface.

The next stage of preparation for painting is a primer. This process provides a reliable coating of wood with paint. By the way, modern quality primer It's also an antiseptic. So, Pinotex is good for these purposes. When applied, it forms a transparent protective film, which is very important for preserving the natural pattern of the wood. In addition, it perfectly protects against mold and fungus, does not allow decay processes to develop on the outside of the frame, even with high humidity.

Primers are made up of many components: oils and resins, adhesives and pigments. The recipe of each primer is somewhat different, however, the common among wood primers is their ability to preserve the structure of wood, therefore, a metal primer for wooden surfaces not used.

Before priming, the surfaces are again thoroughly cleaned and degreased with white spirit. It is better to prime with a brush, not a roller. If you do not allow the putty to dry well or skip the area when priming, after painting in this place will appear dark spot. Then you will have to clean it again with sandpaper, then prime and paint, so you should not rush before painting.

Several coats of paint on a wooden window

Our window is now smooth and even. Before direct painting, we carefully clean the room, clean the space near the window from dust so that it cannot get on the freshly painted surface.

We choose water-acrylate or alkyd enamel paints for a wooden frame. Their main advantages are moisture resistance, elasticity, resistance to fading under the sun's rays. There are several global brands that produce paint specifically for wooden surfaces. In our country, with changeable weather, rains and frosts, Dulux, Remmers, Caparol hold well on window frames, however, at the same time, the question of how much it costs to paint a window is decided by a fairly decent amount. Domestic paint is cheaper. In general, window repair can cost from 500 rubles. up to 10,000 (the last cost includes the services of a hired master finisher).

The paint is thoroughly mixed in a jar, filtered on a metal sieve into a bath. You can do without a sieve, but then small lumps of paint from a can that ended up on smooth surface frames.

The first coat of paint will be much waterier than the next, because its purpose is to soak all the bumps and pores of the wood. To dilute, use a solvent. Allow the paint to dry after brush or roller application. And only after the first layer has completely dried, you can proceed to the second.

Usually the third coat of paint is the finishing one, although sometimes two are already enough if all the preliminary work was carried out in compliance with all the rules. The second and third coats of paint should be thicker than the first to avoid streaks. If they appear, immediately, before drying, remove with a rag with a solvent. If you look at this defect, you will later have to clean the surface again and paint again.

We do not dip the brush into the paint entirely, only half, leave the excess paint in the bath, brushing along the edge with a brush. We start painting from the outside of the window. It is advisable to have several brushes: small ones for hard-to-reach places, large ones for flat surfaces. The width of the brush can be 3cm - flute, and wider - 4-5cm. In shape, a flat brush is much preferable to a round one.

The paint lays down well along the wood fibers. We paint over the corners with light, short brush strokes.

Scotch and newsprint the glass must be removed before the paint dries, because later the paint layer can be damaged.

Accessories, if removed in advance, are installed after the frame has completely dried.

If you have been thinking about how to paint a window - on your own or hire a master - after our instructions, all questions and doubts will disappear. Good luck with your repair!

Hide

Despite the fact that at present most houses are equipped with more than modern designs made of plastic and aluminum, which have won universal love, many have wooden windows in their apartments. Painting windows is a procedure that sometimes owners of wooden windows have to carry out. This is done so that the frames keep an attractive appearance and fulfilled their purpose as long as possible.

How to paint a wooden frame

Take note of a few rules that will help you and tell you how to paint correctly. This applies to the pre-work phase and will greatly facilitate the application of the coating.

Wooden windows are painted only at the right time of the year. It is better to do this at the end of spring, when warm and dry weather sets in, precipitation is almost impossible. right time- the end of summer, when the intense heat subsides, but the autumn rains have not yet begun.
Before you paint the window, you must eliminate all defects and damage.
All surfaces to be painted must be cleaned, removed the previous paint, sanded.
Be sure to apply the paint in several coats, at least twice the application interval, so you will increase its service life.
Before painting the frame, it is recommended to cover the puttied areas with a primer. It is recommended to seal the glass with masking tape or paper strips to prevent paint from getting in.
Do not forget to dilute the paint from the can with thinner, as the composition in the can is too thick.
When working with paints and solvents, be sure to wear gloves and a respirator - take care of your health.

Window painting step by step

So, how to paint with your own hands? Do not forget that painting window frames depends not only on the quality of paint and tools, but on the correctness of the preparatory stage.

Prepare necessary tools. It is better to cover the surfaces around the window with newspapers, seal the glass and fittings.
The window must be cleaned of old paint - remove with a spatula and sandpaper or use a special liquid sold in stores.
Remove all dirt and dust.
Degrease frames or rinse with water.
Putty cracks and chips that are on the frame. Then prime the window. Do not forget that surfaces must be thoroughly cleaned before puttying and priming. We recommend that you first go through the puttied areas with a primer or paint, so that the paint is absorbed and dried, this will give uniformity in painting.
Let the frames dry well. Now you can start coloring. The frames are painted first from the inside, then from the outside. Apply the paint from top to bottom, first covering the horizontal coatings, then the vertical ones.
Apply the paint in one layer, let it dry! Then apply the second and third layers, the strokes should lie on top of each other. Walk on the surface with a roller, which will smooth out the bumps.
Paint with a wide brush, paint over corners and hard-to-reach places with a thin brush.
Cover in the same way outside window.
Delete masking tape and paper before the paint dries, otherwise they will stick and come off with the new coating.

How to choose window paint

How to paint - a question that must be approached carefully and responsibly. Choice the right material- not the last thing in the whole process of updating frames, because good paint will not only change the appearance of the window, but also increase the service life.

When choosing which paint is better to paint a wooden window, look at moisture-resistant materials - this will protect the frames from the penetration of unnecessary water and protect the wood from cracking. The paint must be elastic in order to protect the frames from deformation and shrinkage.

The best option is alkyd paint or acrylic. As a rule, these paints are good because they do not turn yellow and have no smell. Do not be afraid that the paint has water base(diluted with water), after drying it is very resistant and will last for many years. When answering the question of how to paint window frames on the outside - choose bright hues that can reflect Sun rays and thereby prolong the life of the frames.

Starting repairs and, some choose varnish as a coating. How to paint old windows with varnish? Applying varnish is no different from applying paint. Better choose acrylic lacquer, which is moisture-repellent and environmentally friendly (on a wave basis), in addition, it is able to advantageously change the appearance of windows.

Even if you decide to paint the windows with expensive ship varnish, it will crack in a couple of years. Therefore, this is not the best option.

Coating the old layer

If you are thinking about how to paint wooden windows with old paint, then it is better to abandon this thought. No wonder one of the main conditions for competent window staining is the removal of the old coating. If you apply a new layer to an old one that has already cracked from time to time, then you risk not getting the result you expected. The new paint will begin to bubble over the old layer, bumps and roughness will come out - it will not look aesthetically pleasing and will nullify all efforts.

Painting with the help of professionals

If you do not want to think about how to paint old wooden windows with your own hands, are unsure of your abilities, there is simply no free time - entrust the process to professionals. Specialists will perform the work quickly and efficiently, using the most the best materials, which will permanently increase the life of your window. average cost work in Moscow, for example, starts from 3,000 thousand rubles, which will not become an unbearable amount.
Painting wooden windows with your own hands will take you a lot of time and will require focus and attention. Sometimes easier at discounted prices.

If you call a professional, after a few hours of painstaking work, enjoy the view of freshly painted windows. In addition, frames do not need to be painted more than once every 1-2 years, so the cost of the service does not seem exorbitant at all.

If you are still thinking about how to paint old wooden frames, stop doubting your abilities, because this process is available to everyone. And if you do not want to do the restoration yourself - call a specialized company.

Keep a close eye on the condition of your windows, timely painting of wooden frames is the best thing you can do to keep the original look.

What color to paint the windows? The answer to this question lies in the paint itself and in the technology of its application. Painting wooden windows is the final stage in the repair of the premises. In this case, the result will depend not only on the cost of the coating, but also on the preparation of the surface for painting. How to clean the window from the old paint and apply a new one, the article will tell you.

In order to paint wooden window frames with your own hands, they must be brought into proper condition:

The structure is inspected.
Are being prepared the right tools and materials.

For work you will need:

Electrical Grinder or electric drill with fittings.
Foam roller for coloring (see).
Spatula to remove old paint.
Scraper.
Several brushes.
Construction tape.
Plastic film or old newspapers.
Rags.
Container for dilution of paint.

Materials needed for work:

Putty.
Dye.
Solvent.
Primer.

In addition, you will need:

A reliable support, which can be a chair or stool, but it is preferable to use a stepladder.
A hammer.
Carnations.
Chisel.
Screwdriver.
Protective equipment: glasses, gloves, mask or respirator, cap or headscarf.

Wooden surfaces are painted with oil-based paint - alkyd, for internal works. Outside windows are painted with acrylic paint.

Tip: For painting windows, you should use universal paint, it is used for work outside and inside the room.

The price for painting wooden windows varies and depends on the cost of the materials used.

How to prepare surfaces

When repairing windows, surface preparation plays no less a role than the process of applying paint. If this issue is given due attention, then wooden frames are preserved for many years.

They should not be affected by any weather: downpour, snow, heat, dust.

A few rules for window repair:

The optimal day for coating is selected. Outdoors should be:

not hot;
it shouldn't rain;
no wind.

The frames dry well at an air temperature not lower than (+5°C), and humidity up to 80%. On a cloudy, damp day, the tree dries out badly. The paint will set, but bubbles may appear, which is not good for the wood. In just a few weeks, you will need to redo all the work again.

Tip: To increase the durability of the coating, you should strictly follow the painting technology. With poor cleaning of the surface from dirt and residues of old paint, lack of a primer, the coating will not be durable.

Before removing the old paint from the windows, it is necessary to check whether the wooden frame closes. If the wood is damaged and the paint is swollen, you will need to trim the frame with an electric drill with a nozzle or a grinder.

This operation can be replaced with special paint removers. The liquid is applied to the surface for the time indicated by the instructions for its operation (see).

After the paint begins to rise, wrinkle, its layers are easily removed with a spatula. The remains are cleaned with coarse sandpaper.

Before painting windows:

All unnecessary details are removed.
Metal parts are unscrewed: latches, locks, handles.

Tip: If you can’t remove some elements, you can glue them with construction tape to prevent accidental painting over them. Perfect option- remove all old fittings, and after painting the window frame, fasten a new one.

In addition to the frame, you will need to prepare windows and glass for painting.

For this:

Glass must be sealed with tape near the frame to prevent paint from getting on the glass.

Tip: Before painting wooden windows, it is necessary to stick masking tape on the glass, stepping back two millimeters from the frame. In this case, the paint will be able to fill the void and all the gaps between the frame and the glass, which will prevent the accumulation of moisture.

If at strong wind The glasses “tremble”, this indicates their poor retention in the frames. To prevent such troubles, you will need to replace the rails. New elements are painted separately and nailed after painting the frames.

How to prime and putty frames

After a preliminary examination and preparatory work you can start the initial processing of the frame.

For this:

In the presence of metal fasteners that could not be removed, they are treated with a metal primer. It can be:

"hats" of nails;
hanging loops.

The wooden frame is treated with a special antiseptic to get rid of the reproduction of wood pests and prevent it from rotting.
All depressions, small bumps or potholes are filled with putty (see). In this case, the layers should not be applied thick, leisurely. Otherwise dense layer putty will not be able to dry well, and immediately after painting the window, the putty from the tree will fall off along with the paint.

In addition to puttying the wood on the frame, it is necessary to putty the glass.

For this:

The surface is cleaned of old paint, as shown in the photo.

Irregularities are smoothed out with a sandpaper.
Removes debris and dust with a damp cloth
Spatula thin layer putty is applied, the tubercles are smoothed out.
After two hours, when the material dries, the surfaces are cleaned with fine-grained sandpaper.
A rag removes particles of dry putty.
If necessary, to make it perfect Smooth surface, all actions are repeated again.

After this process, a primer is applied to ensure that the paint adheres strongly to the wood surface.

Tip: It is better to choose a primer that has been tested with additional function to disinfect surfaces. After coating, a thin layer is formed on the surface. protective film, it provides protection against harmful insects, rotting and maintains the desired moisture balance. At the same time, it must retain the structure natural wood. Do not use a metal primer for wooden frames.

Before coating, the wood is degreased with white spirit:

The liquid is applied with a roller, it is necessary to work with gloves and a mask to protect the face.
After applying the material, the wet areas should darken - this indicates that the putty has not dried out. After the paint dries, dark areas may appear. This could mean:

putty is not completely dry;
a section of wood was skipped that did not have a primer layer applied.

In this case:

These areas are cleaned with sandpaper to the ground.
A layer of primer is applied.
The surface is painted.

How to paint wooden windows

Before proceeding with the coating, it is necessary to determine which window paint is best in a particular case.

It can be:

Polyurethane varnishes. Such coatings are the most wear-resistant.
Acrylic varnishes- more accessible, not afraid after the water dries, dry quickly. If necessary, they can be diluted with water, and with the help of colors to change shades.
Alkyd paints. They are resistant to water and other atmospheric manifestations, to detergents, to mineral oil. A properly primed and then painted surface retains good view up to four years.
Nitrocellulose paints. This is an acceptable option, but when painting the surface, the acetone included in its composition begins to evaporate quickly, which requires good ventilation of the room. In addition, the paint is highly flammable.

When choosing a color, it is better to choose light colors. The use of dark coatings will cause the windows to heat up quickly in the sun, shortening the life of the window. useful properties paints. Cracks may appear on the lacquer surface and resin may come out.

Opening a can of paint. The composition is thoroughly mixed with a convenient stick, which can be made from an old plank.
If possible, you need to strain the paint through a metal sieve, which will get rid of lumps.
A small portion of paint is poured into a convenient container, you can use a tin can.
The brush is dipped into the paint, the excess is squeezed out of the brush so as not to spill the paint around.
The first layer of coating is applied to the wooden frames.
If the paint is thick, a little thinner is added.
The first coat of paint must dry completely.
The surface is repainted.
If two layers are not enough, a third, final layer is applied after the previous one has completely dried.

Tip: When painting a wooden frame for the second and third time, the paint should not be sparse, it should be slightly thicker than on the first layer, which will avoid paint streaks. And when they appear, you must immediately remove the excess with a cloth, which is pre-moistened in a solvent.

It is desirable to apply paint along the fibers of the wood, so the coating will lie down better. Strokes should be made short and “light”, without pouring a lot of paint.
Surface painting must begin from the street.
After applying the coating and the final drying of the paint, the fittings are installed in place.

How to paint wooden windows correctly, how to paint slopes on windows, all the nuances of the process will be shown in the video in this article.

Hide

For many generations, the question of what paint to paint wooden windows has been tormenting! Someone says that there is no difference - it will peel off anyway. And someone comes up with tricky recipes in which there are two, three or more ingredients.

We Let's list the most "reliable" means. We will also give instructions on how to properly paint wooden windows..

How to paint wooden windows: paint varnish strife

Kit paint and varnish products for painting wooden windows includes:

1. Water-dispersion acrylic(dilute with water) or alkyd enamel paint- based on resins. Advertising says that both have good water resistance. However, the people trust the second one more.

Someone advise oil paints , but they dry for a very long time for external work.

Increasingly, wooden windows are painted with transparent varnishes - to preserve the texture of wood.

2. Can be used instead of paint clear varnishes. They represent the same alkyd enamel, only without the coloring pigment.

3. Primer on wood, or just drying oil- to keep the paint well. It is very easy to determine which primer is right for you. For water-dispersion paints suitable for acrylic base, i.e. the composition of paint and primer is similar. With enamel, alkyd drying oil is used.

4. Mordant based on white alcohol- with wood protection properties. Those. so that the wood does not absorb moisture and bugs do not eat it.

You can choose putty color one to one with wood

5. Putty on wood.

Some use old-fashioned means: they mix wax with turpentine, rosin, etc. But if you absolutely “do not cook” in paints, it is more convenient to buy already ready-made formulations. Fortunately, stores are bursting with them.

There are a variety of primers, thinners, base paints, top coats and varnishes, etc. You can easily find the best way to paint wooden windows only on the outside, only on the inside, and universal rulers - suitable for outdoor and indoor use.

The most popular "paint and varnish" brand is Tikkurila. Consumers praise her on the forums the most. True, the price, they write, is too immodest. Brands are also mentioned: Pinotex, Zawosan, Tex, etc.

We paint - we do not repaint

You can paint a wooden window, old or new, yourself:

1. If the window has already been painted, it needs to be sanded first. You will find several simple ways to do this in the article:.

For smoothness, the window is sanded first with coarse and then with fine sandpaper.

2. Next, prepare your profile. If there are cracks on it, cover them with wood putty. Sand the rough surface of the wood with sandpaper (first large - No. 150, and then smaller - No. 180 or 220). If this is not done, after staining the villi on the profile will “stand on end”.

3. Remove dust and cleaning from the wood with a damp cloth.

4. Stir the stain and apply it with a brush or swab so that there are no smudges. Therefore, moisten the swab or brush in the stain is not very generous.

The stain usually dries in 6-8 hours.

5. After this time, also apply a primer or drying oil to the window with a brush. There are several options here. Sometimes it is applied before the stain, if, for example, the latter is non-aqueous. Often the stain is not used at all, but immediately primed. In this case, the result can also be quite good.

Choose any paint color. But from the outside sunny side make the profile white so that the rays are reflected from it and the paint does not deteriorate

6. Once the primer dries, start painting or varnishing. If the paint is too thick, dilute with a thinner (buying it is not a problem). Mix not all at once, but little by little. The consistency of the paint should be more like cream than sour cream.

"Enlightened" recommend starting staining with outside window. They say that the moisture accumulated by the tree could evaporate into the apartment. Well, there is logic in this. But it is much more logical to paint the window in the summer in dry weather, when it has not yet had time to get wet.

Apply paint along the fibers with a well-wrung brush in a thin layer. After the first has dried, proceed to the second. And then to the third layer, if the first two were not enough.

Painting a wooden window and not smearing glass with walls is almost an art. How to master it, look at video:

Prices for painting wooden windows in Moscow

Yes, yes, and there is such a service on the domestic market, which is offered by window makers and firms for general repair. So how much does it cost to paint wooden windows? The price of the work alone is from 300 rubles. per m2 of surface. If you count the materials, then the amount will come out more than 10 times. True, you also need to take into account the condition of the window, painting or repainting is required, etc.

October 14, 2016
You can talk about the canons in design for a long time, but every day the existing canons become less and less stable. Aesthetics and harmony, balance, colors, materials, brought together in order to get such a long-awaited result are the essence of your knowledge, practice and self-development. My motto is to learn, see, touch something new every day, and I am sure that this is the only way to keep the right course in “high design”.

With the advent pvc tree began to lose its positions, but if you are a true connoisseur natural materials, you will never give up wooden windows. At proper care they will faithfully serve you for decades, bringing into the house special atmosphere warmth and comfort.

To be ready!

Painting wooden frames requires pre-training grounds. What for?

First, you won't be able to apply the new coat of paint evenly.
Secondly, over time, the lower layer will begin to peel off, undermining the upper one.

Well, was I persuasive enough? Don't want to waste your time? Let's move on to removing the old paint.

If the old coating is already fairly "worn out", it can be mechanically removed using a conventional spatula or dishware. The last handicraft tool is relevant for stripping small "flakes" of the coating.

If the windows have been factory painted with polyurethane or catalytic paint, wipe the frames before stripping soapy water and do the sanding. This will allow you to complete the procedure quickly and efficiently.

If the last painting of the frame was carried out a long time ago, it is recommended to remove the layer thermally. For firing, propane cylinders are used for camping.

Before removing the old paint, the cylinder is turned down with a nozzle, holding it strictly vertically. A lighted match is brought to the open valve and, determining the intensity of the flame with the valve, the frames are fired. After heating, the paint is cleaned mechanically with a spatula.

The next stage of preparation is processing with coarse sandpaper. If cracks and chips are visible on the frame, putty is applied and sanded again.

If you have to remove old paint from several frames, rent a heat gun with a special nozzle that allows you to work on a double-glazed window.

If the frames were painted with oil paint, preliminary cleaning of exfoliated and cracked areas is carried out with a scraper or brush.

Windows that have been painted for a long time are often damaged by fungus, so before painting the frame, treat special tool from mold. The same procedure is carried out on frames previously painted with alkyd varnish.

The right to choose

Criterias of choice

The next question that needs attention is what paint is better to paint wooden frames. Before you paint a frame, answer yourself a few questions:

What type of wood is used to make the frames?
Under what conditions will the frames be used ( high humidity, temperature)?
Is reprocessing possible?
Is it compatible new paint with the old finish?

For coloring wood, enamel, oil and dispersion adhesive coatings are used. From personal experience I recommend looking towards acrylic and polyurethane paints, which are the most modern paint and varnish compositions.
Polyurethane coatings Tikkurila, Sirca, Akzo Nobel and Sayerlack have proven themselves in painting the outer parts of frames. You can safely use them in the country house, balcony and apartment.
If your goal is to update the look of window sashes or window sills, look for odorless paints such as alkyd and nitrocellulose enamels. As an alternative, you can consider paints used for wall and ceiling decoration: zinc white, MA-15 and MA-11 oil paints, PF-560 and PF-115 enamels.

As tempting as it may be to paint the frames and window sill in dark shade, discard it. The thing is that the dark pigment burns out, as a result, all your efforts will be invisible in 1-2 years.

Before painting a frame that has a coating layer, grout with putty and a primer tinted to match the paint. After drying, the surface is sanded and painted.
Oil-enamel compositions are applied to the frame, previously painted with two layers of oil paint.

Warm up the enamel a little, this improves its coating characteristics.

Paint Rating

If the windows are not the same

Your struggle with peeling paint may not be successful. Besides, wooden structures often lose their appearance, betraying their age.

Do not despair, I have instructions for you that will allow you to turn an ordinary wooden frame into a design element with your own hands. Next, we will talk about decorative staining with aging effect. So you can easily get vintage, shabby chic, country and.

Old frames can be made even older by giving the effect of honorable age. To do this, they often use the technique of craquelure, brushing, staining, gilding with patina, liming and olding.

Who is the oldest here?

What do you think of when you hear the phrase "old windows"? Scuffed paint, traces of time, slightly sagging doors. And if the last point is a bit non-functional, then the first two can easily be implemented to get a vintage style.

To implement the plan, we need two shades of paint. The first bottom layer should be as contrasting and saturated as possible. If you have purchased a light paint, do not rush to go to the store on chocolate, take a closer look at the colors, which not only allow you to get a shade, but also vary its saturation.

The second color should be light, shades of coffee latte, baked milk and ivory are optimal. The base color is applied with a brush after the base has completely dried.

Now you can arm yourself with sandpaper and wield until a dark one appears through a light shade. And now your frames acquire a touch of time and become actor interior.

How everything cracked!

Another way to quickly age is the use of craquelure compositions. Here you can not do with ordinary acrylic or alkyd paints, you will need a special craquelure varnish, which "breaks" upper layer, forming cracks.

For the base, you can use several shades, this will make your cracks multi-colored.

Execution sequence:

Paint for wooden window frames in the base color (color of cracks) is applied to the prepared surface and left to dry completely.
A craquelure varnish is applied over the paint.
After it dries, you can apply the main color and admire the scattering of cracks.

brushing technology

Brushing refers to mechanical methods, so feel free to arm yourself with chisels, skins, metal brushes and drills.

The main goal of the method is to remove the soft top layer of wood, this allows it to be successfully combined with other methods of aging. If you are taking up the procedure for the first time, try your hand at hardwood, it can be oak, walnut, ash, larch. The main thing is not to overdo it and not turn window frame into a sieve.

The brushing technique is not suitable for beech, maple, pear, teak, cherry.

What is the best way to fix the result? Of course, stain and varnish, for example, Syntilor Vernis BSC Brilliant or Tikkurila Unica Super.

You made me tired

Stain processing - additional way, which is more often used with craquelure and brushing. Part of the stain is washed off the surface with a damp sponge, while the edges, bends and cracks acquire a darker shade, which is fixed with antique wax and varnish.

If you did not manage to get the desired result from the first treatment, work on the cracks with a thin brush with an aqueous stain solution.

old, very old

Olding is remarkable in that it allows you to get various effects, here you have burnout in the sun, mossy swamp, and fading, and even salinity. Almost all chemicals designed for hard rocks wood. The result is fixed with varnish.

Summing up

Now you know how to clean wooden windows from old paint, why prepare and how to properly paint the frames, it remains for me to offer you a video in this article and invite you to a discussion on the topic "Wooden windows: to be or not to be."

Categories

Popular