How to peel off double-sided tape from different surfaces. Are there traces of adhesive tape on the surface? Let's remove it quickly! How to remove double-sided tape from paper wallpaper

Removal method double sided tape depends on what surface it was applied to. The difficulty lies in the fact that acrylic adhesive is applied to the adhesive tape, which leaves sticky marks. Improvised means in the form of solvents, oils help to peel off the tape plant origin or hair dryer. For each surface, a different method is used, depending on the material from which it is made.

Show all

From walls and doors

There are several ways to remove double-sided tape from a wall or door surface:

1. 1. With a hair dryer. The device turns on to the maximum mode and is kept at a distance of several centimeters from the adhesive tape. A stream of hot air is directed to the center and to the edges of the adhesive tape. After the adhesive layer has softened, the film is peeled off with a knife and removed. If part of the layer remains, then it is removed with a sponge dipped in soapy water.
2. 2. Using vinegar, water and soap. Water is taken - 275 ml, vinegar - 60 ml, liquid soap- a few drops. A wet sponge is made in a circular motion.
3. 3. Using an eraser. The rubber is wetted and the surface is wiped with it. The eraser acts as an abrasive on wood, furniture and walls.

From glass

Ways to remove tape from glass:

1. 1. Using sharp objects. Since heat is not applicable to glass, the tape can be torn off with a knife. The main thing is not to scratch.
2. 2. Using cleansing oil or rubbing alcohol.
3. 3. Using a window and mirror cleaner.



With plastic and ceramic tiles

Wipe the tape off the plastic ceramic tiles using the usual available means:

1. 1. Another adhesive tape, which is superimposed on the first one and breaks off with a sharp movement.
2. 2. Vegetable oil with a sponge. It is applied to contaminated plastic and removed with a paper towel after 10 minutes.
3. 3. Medical alcohol. When it is applied to the surface, it also removes greasy spots.
4. 4. Eraser. You can rub it on the surface, and then remove the dirt with a damp cloth.
5. 5. Hot soapy water. It removes glue residue well.
6. 6. Dishwashing liquid.
7. 7. Heating. A hair dryer will also come in handy.

It should be remembered that when working with a hair dryer, you need to set a moderate speed mode, because the plastic surface may deteriorate.



From the refrigerator

From the refrigerator sticky tape removed in the following ways:

1. 1. With the use of vinegar. If the first time it was not possible to remove traces of adhesive tape, the agent is applied to the refrigerator and left for an hour. Then wipe with a dry cloth.
2. 2. Using soda. It mixes with water to form a paste. The rag is moistened in the solution and traces of glue are removed.
3. 3. Baby oil. A few drops are applied to the surface of the refrigerator. Then wipe with a rag.
4. 4. Razor blade.

The razor needs to be handled very carefully. Any wrong move will result in scratches on the refrigerator.

From paper and wallpaper

Again, you can remove adhesive tape from paper and wallpaper with a hair dryer. To do this, a stream of hot air is directed to the surface. With the other hand, the tape slowly comes off the paper. As it comes off, the air jet is directed to the place of separation. Gradually, all paper will be cleared.

Double sided tape is very useful thing in the house, but removing it can cause you a lot of trouble. Choice better way removal will depend on the type of surface it was stuck to and may require some trial and error. Continue reading our article where you will learn a few useful tips about removing double sided tape.

Steps

Removing double-sided tape from walls and doors

Rinse off any excess tape with water, vinegar, and soap. Mix 2 cups (275 milliliters) of water with ¼ cup (60 milliliters) of vinegar and a few drops of liquid soap. Dip a sponge into this solution and then rub desired area walls or doors in small circular motions. This mild cleaning solution should not damage the paint, however you may notice some surface discoloration.

Use a magic eraser (another name for such an eraser is a melamine sponge) to remove any remaining adhesive tape. Dampen a melamine sponge with water and rub it over the desired area until the traces of tape disappear completely. Magic Eraser is a mild abrasive that is unsuitable for use on glass and polished surfaces, but is perfectly safe for walls and doors. However, its use may result in slight discoloration of the surface.

• You can buy a magic eraser in the department detergents supermarket or hardware store.

Removing double sided tape from glass

1. Take everything you need. When removing the double-sided tape from the glass, you cannot use heat, as this may cause the glass to crack. You also cannot use anything abrasive as there is a chance of scratching the glass. The only way out is to remove the adhesive tape with oil. Here is a list of what you will need:

   • Butter knife (you can also do this with nails)
   • window cleaner
   • Sponge and glass cleaner
   • Food or cleansing oil (mineral oil, Goo Gone, etc.)
   • Medical alcohol

2. Try to tear away as much as possible large quantity adhesive tape. You can do this by prying off the corner with your fingernail. You can also use a butter knife or spatula for this purpose, but be careful not to scratch the glass.

   Spray the tape with window cleaner. If you don't have a cleaner, you can make your own by mixing 2 cups (275 milliliters) of water, ¼ cup (60 milliliters) of vinegar, and a few drops of liquid soap.

   Rub the wetted area with a sponge in a circular motion. This will help loosen up any remaining pieces of tape. If the sponge has two sides (soft and abrasive), try using the abrasive side.

   Use oil and a safe glass sponge. If vinegar-based glass cleaner doesn't work, then you need to soak the tape in vegetable oil (like olive oil) or a cleaner (like Goo Gone or Goof Off). Spray the oil on the desired area of ​​the surface and rub it with a sponge until all the tape is gone.

   Clean the glass with alcohol. Dampen a soft cloth with rubbing alcohol and wipe the selected area until the tape and oil are gone.

   • The traces remaining from the adhesive tape should be polished with a sponge dipped in oil, and then wiped again with alcohol. The cleanser will remove any remaining adhesive tape and evaporate without leaving any residue.

   Removing double-sided tape from other surfaces

   Use a hair dryer to remove the tape from the paper. Insert the plug into the socket and turn on the hair dryer. Set the blower to medium or strong and direct the hot air to the tape. After a few minutes, try to pry off the tape with your fingernail. This method is especially effective for removing tape from paper.

   • Take extra care when handling photographs, as hot air can damage them.

3. Use cooking oil. It works on the same principle as the commercial products Goo Gone and Goof Off, but contains no harmful chemicals, making it safer to use on plastic surfaces. Just pour some oil on the area to be applied, wait a few minutes, and then wipe it off with a dishwashing sponge.

   • Do not use oil on paper, cardboard or fabric as it will stain.

4. Try using acetone or nail polish remover on bare surfaces. This will dissolve the adhesive layer of the tape and it will be much easier for you to remove it. Acetone, like alcohol, evaporates easily, leaving no residue behind. Unfortunately, it can also dissolve paint on the treated surface, so this product is not suitable for plastic and painted surfaces. Just pour acetone or nail polish remover on the tape, let it soak in for a few minutes, and then try to tear the tape off. This method is most effective on fabric as acetone leaves no residue behind.

   • It can be used on paper and cardboard, however it may wrinkle these materials (as with any other liquid).
   • When using nail polish remover, try to use a clean product without additives such as vitamins and strengthening agents. Also, try not to use multi-colored nail polish remover, otherwise there is a chance of staining the surface being cleaned.

5. On the plastic materials it is recommended to use medical alcohol. It will act as effectively as acetone, but not as aggressive, which means the paint and the surface itself will not be destroyed. Not a large number of You can remove the remaining adhesive tape particles with a sponge. This method is very effective for fabric.

6. Removing adhesive residue

   Use oil to remove tape residue from plastic or glass. You can use a vegetable oil like olive oil, mineral oil, or cleaning oils like Goo Gone or Goof Off. Dampen a cotton swab with the oil and rub it into the surface until the tape marks are gone. Moisten another cotton swab with rubbing alcohol and wipe the surface to be cleaned to remove any oily residue.

   • When working with large area horizontal surface, you can pour oil on the desired area and leave it for a few minutes.
   • Do not use oil on bare wood or walls. Otherwise, the oil will soak into the surface and leave greasy marks.

7. Try using acetone on glass. Do not use acetone on painted, treated or plastic surfaces. It erases paint and corrodes some types of plastic. Minor residues are removed with a cotton swab moistened with acetone by wiping the required area until all traces of adhesive tape are completely removed. For more severe cases, fill an aerosol bottle with acetone, spray it over the desired surface and let it sit for a few minutes before wiping until complete disappearance tape traces.

   • This method can be combined with the oil application method.
   • Acetone is safe on most fabrics, but in any case, you should test it on an inconspicuous area first, as some fabrics may change color when exposed to it.

8. Use rubbing alcohol to remove tape residue from any surface. It is safe to use on walls, plastic, treated and untreated wood, fabric and glass; it should not wash off the paint or damage the surface, but it is possible minor change colors. A solution with a high alcohol content, such as 90%, works more effectively, however, on painted surfaces, it is better to use a liquid with a low content, such as 70%.

   • A smooth surface should be polished with a cotton swab dipped in alcohol until the traces of adhesive tape disappear completely.
   • On a rough surface, use a towel or piece of cloth instead of a cotton swab. This will help prevent fibers from getting into the texture of the treated surface.
   • Alcohol from a spray bottle should be applied to the area with firmly adhered tape residues. Leave the alcohol on for a few minutes and then wipe the surface with a cloth or towel.

Double-sided adhesive tape solves many household problems, reliably gluing surfaces. In addition, its price is very low. However, this tool also has disadvantages. If you need to peel off the tape, then this will not be easy. Double sided tape leaves behind sticky trail to which dust and small debris adhere. It is unlikely that it will be possible to wash the surface with ordinary water. The adhesive used to make double-sided tape has an acrylic base. Therefore, the method of removing the tape will depend on the type of surface. There are effective folk remedies, which will help to completely get rid of the adhesive tape without harm to the coating.

In order not to spoil the coating from which you need to remove the double-sided tape, it is advisable to follow the following recommendations:

1. If you need to remove the tape from the paper, it is better to use a hair dryer. Hot air should be directed to the adhesive tape, and after a few minutes, try to peel it off. Take extra care when removing tape from photographs, as high temperatures can damage them.
2. For well suited medical alcohol. It is less aggressive than acetone. Therefore, neither the paint nor the coating will be affected.
3. To get rid of double-sided tape, you can use single-sided tape or regular tape. To do this, the selected tape is glued on top of the removable double-sided tape and torn off with force. The double-sided tape should peel off along with the single-sided tape. This method must be used with care so as not to damage upper layer coatings. It is suitable for removing double-sided tape from iron doors and other metal surfaces.
4. To remove tape from the fabric, you can use alcohol or acetone. Rub the remaining trace with a sponge.
5. The oil is able to remove traces of double-sided tape from plastic surfaces without harm to the coating. But you can not use oil to clean paper, cardboard and fabric, as it leaves stubborn stains.
6. On unpainted surfaces, acetone or nail polish remover can be used. These solvents evaporate without leaving stains, but may damage the painted surface.
7. For varnished surfaces Suitable for cleaning with vegetable oil or rubber nozzle on the drill.

Cleaning products

In the shop household chemicals can be purchased special means to remove adhesive tape. But if this option is not available, then you can use improvised means.

The difficulty lies in the fact that it is required not only to gently pry and peel off the double-sided tape, but also to remove the remaining sticky residue.

Eraser

An ordinary eraser can help you get rid of double-sided tape at home. This method is more suitable for hard and smooth surfaces. Do not remove sticky tape from fabric with an eraser.

It is necessary to roll traces of adhesive tape into lumps with an eraser. Then wipe the area with a cloth or paper towel.

Drill with rubber nozzle

The principle of operation is similar to removing tape with an eraser. But a drill with a rubber nozzle can clean a large area with less effort.

This method is also best used for cleaning durable surfaces.

hair dryer

You can remove the adhesive tape with a hair dryer. To do this, you need to send hot air to the tape from a distance of 5-10 cm. When the tape softens, you need to wipe off the glue with a sponge or thick cloth.

Heating is only suitable for cleaning heat-resistant surfaces. For example, using this method, you can soften double-sided tape stuck to the wall, doors, or even the car body.

Gasoline or white spirit

To get rid of adhesive tape on a plastic surface, you can use refined gasoline or white spirit. You will need to moisten a cotton pad with the selected substance and treat the contaminated area. Then wipe the surface with a clean damp cloth.

These solvents are quite aggressive, so they can damage the coating. Before using them, it is recommended to check the reaction of the surface to be cleaned on an inconspicuous area. If white spots appear or gloss disappears, then more gentle methods should be used.

Gasoline and white spirit should not be used to clean children's toys.

It should also be noted that these are flammable substances. Therefore, work with them should be away from sources of fire and in a well-ventilated area.

Wiper

Glass cleaner contains alcohol and other cleaning agents, so it can dissolve adhesive tape. Plus - almost any surface can be treated with a glass cleaner: from tiles and plastic to mirrors and ceramics.

But it is worth remembering that the alcohol that is part of the glass cleaner can dissolve not only the adhesive base, but also the paint of the surface to be cleaned.

Vinegar

Vinegar is suitable for removing adhesive tape from tiles, metal, plastic, glass.

You will need to moisten a cotton pad with vinegar and wipe the adhesive mass.

Acetone

You can use acetone or nail polish remover. To do this, moisten a cotton pad in the liquid and attach it to the tape to be removed for 1 minute. This procedure must be repeated until the adhesive tape softens. Then traces of glue can be easily removed by wiping the area with a sponge or a cloth made of dense fabric.

This method is not suitable for cleaning tinted car windows and metal surfaces.

Vegetable oil

A more gentle agent for removing double-sided tape is oil. To clean the coating from the adhesive tape with vegetable oil, you need to pour it directly on the adhesive tape, if this horizontal surface. If the surface is vertical, soak a cloth with oil and apply it to the contaminated area. Wait 15-20 minutes. Then remove the remnants of the adhesive base with a napkin or cloth soaked in soapy water or water with the addition of dishwashing liquid.

Instead of vegetable oil, you can use essential oils such as tea tree oil, eucalyptus and others.

You should not oil the fabric upholstery of furniture, as there is a risk that the oil stain cannot be removed without streaks.

From plastic

Furniture is made of plastic window frames, children's toys, etc. In order to wipe off double-sided tape with plastic surfaces you can use improvised means:

• vegetable oil;
• refined gasoline (can not be used for children's toys);
• eraser;

The effect of these funds has already been discussed above.

From furniture

Before transporting furniture, all drawers, doors and other parts are fixed with double-sided tape. In order not to damage the coating of the new headset and get rid of the adhesive tape, you must follow these recommendations:

1. Untreated wood should not be cleaned with oil, as greasy stains will remain on the surface. Instead, you can use refined gasoline or white spirit.
2. Remove adhesive tape from processed wooden surfaces(for example, doors) preferably with a hairdryer and an eraser. These are the safest means for a tree.
3. Lacquered and painted coatings are recommended to be cleaned with vegetable oil.
4. Rubbing alcohol is suitable for removing adhesive tape from any surface: treated and untreated wood, plastic and glass. But when working with polished and painted surfaces, it is necessary to act quickly and thoroughly wash off the remaining alcohol.

By choosing the right method, you can remove adhesive tape from the surface of new furniture without harming the coating.

From glass

Do not use hot air when cleaning glass from adhesive tape. This may lead to the formation of cracks. The use of abrasives is also excluded. sharp knives which may scratch the glass.

To remove tape from glass surfaces, follow the instructions below:

1. Carefully pry off the corner of the adhesive tape with your fingernail, spatula, or dull knife. The main thing is not to scratch the glass. These items cannot be used to scrape tape.
2. Try to tear off the sticky tape.
3. Spray the remaining tape with glass cleaner.
4. Wipe dirt with a sponge. The glue should soften. You can also use vegetable oil for this purpose. You will need to moisten the remaining adhesive tape with oil and wipe the area with a sponge until the tape is completely removed.
5. Moisten a cloth with alcohol and wipe the cleaned area. As a result, the oil will be washed off, and the alcohol will evaporate without a trace.

Kirill Sysoev

Calloused hands do not know boredom!

Content

Adhesive tape is used in huge number spheres: construction, repair, creativity, industry, everyday life. Scotch tape with two adhesive sides is very popular. With it, you can solve a lot of important tasks with a minimum of effort. There is different types such adhesive tape, each of which has its own characteristic properties and advantages. Learn all the features of working with this material.

What is double sided tape

it special tape, both sides of which are sticky. Designed for secure fastening of any two objects. Whatever the substrate of the adhesive tape, it always uses a rubber or acrylic-based adhesive. On one side there is protective film made of waxed paper, which is torn off with a slight movement, revealing a sticky surface. There are many areas of use for this material. It is reliable and economical.

Application

In most cases, double tape is used in repair and installation work. With it, not too heavy objects are attached to suspended ceilings, tiles, linoleum. List of applications:

• fixing linoleum to the floor;
• mounting finishing panels from lightweight materials;
• design work;
• seamless fastening of the package;
• gluing metal furniture;
• installation of road signs;
• fastening of stiffening ribs of metal doors;
• fixing handles on transparent sliding doors;
• connection of small shelves;
• gluing mortgages;
• installation of false ceilings;
• fastening holders, hooks;
• assembly of window structures;
• gluing moldings;
• clothing industry;
• installation of boxes for wiring;
• printing industry;
• manufacturing volumetric letters, advertising light structures;
• needlework;
• typographical business;
• creation;
• car body repair;
• economic work.

Main advantages

Double-sided adhesive tape has many advantages, so it is actively used in many areas. Benefits include:

• Ease of use;
• reliability;
• strength;
• economical consumption;
• low cost;
• impact resistance ultraviolet rays, moisture, temperature, solvents;
• durability;
• tightness.

Kinds

There is different types adhesive tape. Choose the right one according to the task at hand. Types of double-sided tape on sale:

1. Foam based. It has a thickness of 0.5 mm or more. It is actively used in the field of construction and repair. Great for attaching items complex shape, uneven surfaces, products with holes. Roughness and other defects reduce the area of ​​the bonded surface. Therefore, for their fastening, a double-sided Velcro with a reliable base, for example, foam, is required.
2. Polypropylene. Film-based, resistant to moisture and mechanical damage. Transparent, thin and elastic, easy to use, high quality, provides a rigid grip on hard surfaces. Good for working with glass and polymers.
3. Paper-silk. With an easily torn base. With a weak adhesive, suitable for gluing paper, photographs.
4. Special. For complex work, for example, when high temperatures Oh. Suitable for attaching large items. This variety will be expensive.
5. Baseless. Adhesive transfer material. Completely transparent. It is transferred with sticks together surfaces under the influence of high temperature. impact resistant sun rays, solvents, chemicals. It is used for lamination, fastening of foam materials and plastic.
6. Fabric based. This double-sided adhesive tape is very strong and durable. The basis is cotton or synthetic. It is recommended to use it for work with floor materials, decoration. The material is soft and flexible. Suitable for fixing uneven rough surfaces.
7. For vertical mounting. Used for gluing mirrors, hinged moldings.
8. For horizontal mounting. It is used for laying linoleum, other floor materials.

How to apply double sided tape

First you need to select a ribbon suitable type based on what you need to fix. Features of the workflow with adhesive tape:

1. If the materials to be bonded are of different quality, then you need to carefully remove the film from one sticky surface and stick it to the object that is more porous. Then the second protective layer is removed. A second object is applied on top, which needs to be glued, pressed tightly and held for a while.
2. On the simple products tape can be attached in any order.
3. The area of ​​adhesion of materials should be maximum.
4. Cut the pieces ahead of time.
5. Before gluing the surface must be cleaned of dust, degreased.
6. Do not touch the sticky layer with your hands.
7. Press the attached surfaces to each other long and hard.
8. If items different sizes, then first the adhesive tape must be applied to the one that is larger.
9. Favorable temperature for gluing is from 20 to 40 degrees.

How to peel off double sided tape

This task is sometimes very difficult and confuses many. It is very problematic to remove the double-sided adhesive tape so that there is no trace of it left. The removal method depends on the material of the surface to be cleaned. For the procedure, the following compositions and tools can be used:

• petrol;
• rubber nozzle on the drill;
• alcohol;
• vegetable oil;
• acetone;
• kerosene;
• White Spirit;
• solvent.

First, the double-sided adhesive tape must be carefully pry off and tear off a part, and only then apply additional funds. Removal Tips:

1. To peel off tape from paper (for example, wallpaper), direct a stream of hot air at it with a hair dryer. After a few minutes, pry with something sharp and carefully remove. If necessary, you can warm up several times, removing a small piece.
2. You can try to remove the tape masking tape. You need to take a big cut. Press it firmly against the tape, leaving one edge free. Slowly pull the tape towards you. The adhesive strip will stretch after it.
3. The adhesive tape is removed from the fabric with alcohol. The remaining particles are gently erased with a sponge.
4. Use oil on plastic surfaces. Pour a little on the sticky area, wait a bit. Rub with a soft sponge.
5. Oil is not suitable for removing tape from fabric, paper and cardboard. There will be traces that cannot be removed.
6. If the surface is not painted, use acetone or nail polish remover to clean. These products will dissolve the sticky layer and the double-sided tape can be easily removed. Acetone evaporates quickly and leaves no residue, so it is suitable even for some types of paper.
7. Painted surfaces are best cleaned with a rubber nozzle on a drill.
8. It is advisable to remove the sticky double-sided tape from varnished products with vegetable oil. The exposure time can be up to 12 hours.
9. If the surface cannot be wetted, try removing the double-sided tape with a simple eraser.

Often, various objects are glued with adhesive tape to walls and doors. From such surfaces, double-sided adhesive tape is easiest to remove in this way:

1. Turn on the hair dryer near the object to be removed.
2. Holding it at a distance of a few centimeters, direct a stream of hot air onto the double-sided tape. Pay particular attention to the edges and corners.
3. Warm up the tape for several minutes in a row.
4. Turn off the hair dryer.
5. Pry the edge of the self-adhesive with a fingernail or knife and remove it by gently pulling it towards you.
6. Wipe off the remaining sticky material with a damp sponge dipped in soapy water.

Remember a few more useful tips for removing tape. These recommendations will help you understand how to act in unusual situations:

1. 90% alcohol is very effective, but 70% is better for painted surfaces.
2. Do not rub tinted glass with acetone or nail polish remover.
3. Clean smooth surfaces with cotton pads soaked in alcohol, and uneven and rough surfaces with a cloth or towel.
4. To remove the sticky layer from household appliances, ceramics, glass and tiles use acetone, window cleaner or vinegar. Alcohol will also work.

From plastic

Surfaces of such material are best removed with medical alcohol. It does not act as aggressively as acetone or caustic solvents, so it will not damage either the plastic itself or the paint. Pour a little alcohol on the double-sided adhesive tape and leave for a while to absorb. Gently tear off the material. If excess adhesive remains on the surface, wipe it off with a soft cloth liberally dampened with rubbing alcohol. With caution, you can use gasoline and white spirit.

From glass

In this situation, methods with exposure to hot air cannot be used. This may cause the glass to crack. It is also forbidden to use abrasive materials that are guaranteed to leave scratches. To remove the double-sided adhesive tape from a glass or mirror, you will need the following supplies:

• medical alcohol;
• window cleaner (you can make your own by mixing 275 ml of water, 60 ml of vinegar and a little liquid soap);
• edible or mineral oil;
• glass polish;
• butter knife or wooden spatula;
• sponge.

It is important to proceed carefully and slowly so as not to damage the surface. Step-by-step instruction:

1. Pry off the corner of the tape with a butter knife or wooden spatula. Try to tear off the largest possible piece.
2. Spray the surface to be treated with a window cleaner.
3. With a sponge, wipe the area in a circular motion.
4. Soak the remaining double-sided tape with oil. Scrub with a sponge until everything is removed.
5. Moisten a piece with alcohol soft tissue. Wipe the surface.
6. Polish clean glass.

From furniture

Many items are secured with double-sided tape during shipping. Doors, drawers and other elements of cabinet furniture are especially often glued. Scotch can get on soft part. In such a situation, use the removal methods used for the fabric. Recommendations for cleaning other furniture surfaces:

1. Clean painted and polished elements with oil.
2. Clean untreated wood without varnish and paint is best cleaned with gasoline or white spirit. Oil will not work, because it will saturate the material and leave greasy marks.
3. If you do not know exactly what the surface is made of, it is better to use medical alcohol. It is the safest and suitable for almost everything.

Choice

Of the many types, it is important to choose the adhesive tape that will best meet your requirements. Then the work performed with its use will be durable and reliable. To decide on the choice of adhesive tape for purchase, use the following recommendations:

1. Double-sided tape with acrylic adhesive gives excellent adhesion immediately. It is recommended to use it for fixing mirrors, hooks, hangers, information plates in public places.
2. For smooth flat surfaces suitable double-sided tape with a film base.
3. When choosing adhesive tape, specify which Weight Limit And he can handle the load.
4. For angular, rough, uneven surfaces more suitable tape on a rubber base.

What can be done with double sided tape

Creative people can use the tape as a handy tool for their crafts, toys. From adhesive tape it will be possible to make:

• picture;
• sculpture;
• interior decorations;
• artificial flowers;
• desktop organizer;
• gift wrapping;
• candlestick;
• covers for notebooks or textbooks;
• envelopes;
• note board;
• bookmarks;
• small boxes for storage.

Adhesive tape is actively used not only during repair work, but also in stationery, household purposes. However, not everyone knows how to peel off adhesive tape quickly and efficiently without the help of professionals. In addition to securely fixing objects or parts of it, adhesive tape can leave traces behind that need to be disposed of. In order not to spoil the surface of wallpaper, furniture and other items, you need to properly peel off the tape.

Peel off regular tape

In every home you can find a large number of plastic items. To carefully and without traces remove the adhesive tape from the plastic, you will need to prepare:

• solvent, you can choose gasoline;
• stationery washing gum;
• vegetable oil;

How to remove tape from plastic

With the help of ordinary vegetable oil, you can quickly and effectively remove adhesive tape and all unpleasant traces of it.

To do this, do the following:

1. After you have torn off the adhesive tape from the plastic surface, you must immediately treat the problem area with vegetable oil using a lint-free cloth. If it is possible to leave a napkin with oil on the problem area, it is recommended to wait at least 2 hours. After removing the adhesive tape from the plastic, you need to wash the surface of the product with soap solution.
2. You can use a stationery eraser to remove adhesive tape and traces after it from glass surfaces, furniture and other items. This method will help in the case of old traces. It is enough to rub the problem area with an eraser. The resulting litter should be removed with a brush or vacuum cleaner. However, keep in mind that the process will take a long time.
3. Thinner or filtered gasoline perfectly removes adhesive tape and traces after it from plastic surfaces. It is necessary to perform the following steps: take a cotton pad, moisten it in the indicated agent, treat the problem area. It is necessary to carry out the procedure with gloves. Before using these aggressive products, you should check their effect on an inconspicuous area of ​​\u200b\u200bthe product.
4. If you used adhesive tape to insulate windows, then you can not do without the help of a hair dryer. It is necessary to warm up the adhesive tape and tear it off the surface.

These methods perfectly remove adhesive tape from plastic surfaces.

How to remove tape from furniture

Scotch tape is used when transporting furniture, so you need to get rid of it correctly.

• If the surface of the furniture is polished, it is recommended to use vegetable oil.
• Filtered gasoline can be used to clean any type of furniture, but be aware that it can ruin painted or polished items.

Let no trace of adhesive tape remain on your furniture!

How to peel off double sided tape

Double sided tape is different high strength compared to conventional adhesive tape. Traces of this type of adhesive tape bring a lot of trouble. Getting rid of this problem is easy.

• You need to use a solvent, gasoline, kerosene or ordinary alcohol.
• You can use a rubber nozzle designed for power tools.
• Add a cotton napkin.
• Vegetable oil.

Perfectly eliminate traces of double-sided tape hair dryer. It is enough to warm up the problem area, then remove the tape. After removing the tape, it is recommended to treat the contaminated area with a lint-free cloth.

The use of vegetable oil is a way out of this situation. This method is appropriate to use if the surface cannot be exposed to high temperatures. With a cotton pad dipped in oil, you need to rub the problem area. After the procedure, wash the area with soapy water. You can use dishwashing detergent.

You can use various chemicals for domestic use. They include components that can easily remove traces of adhesive tape from various surfaces.

It is easy to remove adhesive tape from wallpaper and other surfaces with the help of improvised means.

1. If you can use more aggressive methods of removing tape, then using a rubber nozzle will do. This method is recommended when you need to clean large areas. The nozzle is put on a drill, then traces of adhesive tape are removed with its help. You can buy a nozzle for a drill in a specialized store.
2. If you need to remove adhesive tape and traces of it from the glass, you can use a powerful car cleaner. The first step in the procedure will be to remove the base with a thin knife, then take a napkin, moisten it in the prepared product.
3. Adhesive tape can be removed from plastic, glass, and other surfaces with nail remover. You will need to wipe the problem area with a napkin. After the procedure, you need to rinse the cleaned area.

Professionals recommend not to delay the procedure for peeling off adhesive tape from different surfaces otherwise the contamination will be difficult to remove. This is due to the fact that the adhesive base of the adhesive tape becomes soldered to the surface over time, so it will be difficult to deal with the problem.

Haste when removing the tape is useless. It is necessary to test each product used on an inconspicuous area of ​​glass, plastic and other surfaces.

Today they produce various kinds adhesive tape, there are those that are intended for subsequent removal. Manufacturers use adhesive base, which will even disappear itself over time. To remove this tape, simply pull out the edge of the tape. After removing the tape, there will be no trace left on the surface of the product.

Adhesive tape is used by builders, schoolchildren and housewives, so it is important to be able to remove adhesive tape from any surface without special efforts and damage to the product.