Corner cabinet for kitchen sink: design features, types, selection rules. Corner cabinets for a kitchen set: types and rules for choosing a corner cabinet for the kitchen on the wall

A cabinet or bedside table allows you to more optimally place everything inside your space. necessary communications. Modern models are not always just a hollow cabinet, but a fixture equipped with storage systems and special devices for more convenient location appliances, sinks, etc.

The corner option is the best solution for those who want to save meters. And this is not always a forced compromise, since the design of such a sink can be very interesting, and the ease of use is no lower than that of a straight cabinet.

And if about external qualities curbstones is difficult to argue, you still choose a cabinet that fits the set, then about internal arrangement you can talk.

What should be in the cabinet:

Bin. Where without it, today, by the way, containers with the possibility of sorting waste are in fashion at home.
Hidden part kitchen appliances . For example, a food waste grinder or a water filter.
Instantaneous water heater. If the width and depth of the cabinet allows, and the water heater is quite compact.
Place for storage. For example, you can store funds there household chemicals, vacuum cleaner, pet food, etc.

As for the novelties that simplify life, one cannot help but recall the roll-out elements. Mesh roll-out baskets are really in great demand, you just pulled the handle, and the basket gently left the cabinet. Usually household chemicals, brushes, rags, etc. are stored there.

On the cabinet door under the sink, you can also attach a roll-out dumpster. By the way, it can be two baskets, with or without a lid.

Corner cabinet for sink in the interior of the kitchen (video)

The size of the corner cabinet for the sink for the kitchen

Probably the most popular size of a sink cabinet is 900 by 900 mm. This cabinet has a fairly acceptable capacity, and high stability.

This size includes two types of cabinets:

Cabinet with 520 mm outer side walls, 450 mm inner walls and hexagonal module bottom. The frame of such a cabinet does not have a back wall to facilitate the passage of communications. There are no shelves in this cabinet.
Cabinet with outer side walls 520 mm and inner walls 838 and 854 mm, with a pentagonal bottom. It turns out that the module is larger than in the first case and, accordingly, more functional. But under the water supply will have to make a cut.

As for the kitchen facade, on such cabinets it is installed one hinged. It is not possible to mount a pull-out basket.

There is another option, the dimensions are the same - 900 by 900 mm, but the design has two doors. You can make it so that the two facades will open at the same time, or separately.

The module will be L-shaped:

The side walls of such a module are 520 mm;
The back wall of the cabinet is 854 mm, there is only one inner sidewall;
The bottom is L-shaped hexagonal.

In such bedside tables, you can install either one straight shelf under the sink, or make docking with chipboard, but it is very difficult to do it yourself.

Corner cabinet for kitchen sink: design drawing

A drawing of an attached cabinet for a sink is needed if you are going to make a design with your own hands. By the way, this is not so difficult, and if you made some other elements for the kitchen on your own, then you can handle the cabinet.

Before designing a drawing, decide on the following:

The purpose of the nightstand is whether it is only a device for a sink, or a place for storage, etc.;
Decide on the dimensions of the cabinet as a whole and its components;
Calculate the distance between the internal shelves, if any;
Decide on the color of the bedside table and design;
Pick up the material;
Based on the information collected and the most accurate desired photo sample, draw up a drawing.

According to the drawing, it is much easier to assemble the cabinet, and the assembly will be clear, where everything goes according to plan. A ready-made standard drawing can be taken on the Internet.

Do-it-yourself drawing of a corner cabinet for a sink (video)

Do-it-yourself corner cabinet for the kitchen under the sink: do it right

You can make corner modules or parts of them for the kitchen yourself.

Features of the assembly of the cabinet under the sink:

Dowels are inserted into non-through holes to pre-fix parts of the cabinet;
Inserting the dowel into one part, insert its end into the hole in the other, press the two parts of the cabinet tightly against each other;
Before final installation, check all parts for evenness;
Confirmants are screwed into dowels with an ordinary hexagon;
After that, you can mount and adjust the legs, if they are provided;
Fastenings for rails are installed on the side walls, along which the boxes will move;
Fix the rails themselves;
After creating the frame, a fiberboard sheet is attached to the back wall.

If you need a cutout for the sink, you need to attach it to the countertop and make a markup with a pencil. A hole is drilled at the edge of the marking line so that the jigsaw file fits well into it. After cutting out the nest, a sink is inserted into it and fixed with a special fastener (it comes with the kit).

Overview of the corner cabinet under the sink (video)

The design of corner cabinets today is diverse, and a modest design, quite simple, even a small one, can be made more interesting precisely due to the design. Or a sink made of an unusual, spectacular material can brighten up modest parameters.

Successful work!

Corner cabinets under the sink for the kitchen (photo)

The kitchen is a special place that gathers all household members in a calm idyll for dinner or lunch. Furniture in this room plays an important role. This also applies to the headset and cabinets under the kitchen sink.

Thanks to this item, you can not only remove excess clutter, but also bring elements of various modern innovations into the design of the room.

Quite a few important element which touches on functionality issues - high quality sink. Convenient and at the same time stylish is considered a kitchen sink with a cabinet, the composition of which consists of voluminous cabinets. They usually include various drawers with excellent functionality.

If you buy a sink with a double compartment, you must take into account that it requires a special cabinet, its width is at least one meter. Therefore, if the sink space is rather small, then this option is best used in large kitchens.

Cupboard cabinets are used without back walls . This simplifies the installation itself and improves the quality of the installation of the sewer system.

When choosing this product, the dimensions of the sink are also calculated: the larger it is, the larger the furniture itself will be under it. The location of the mixer is also taken into account. It is not mounted too far from the beginning of the sink from the approach side.

When installing the cabinets, leave some space between the cabinet itself and the floor surface. This will make it easier to remove various debris that may accumulate under the sink.

In any case, choosing a cabinet for a kitchen sink, characteristics are taken into account:

The quality of the material - it is better to use moisture resistant.
Convenient product height.
Depth and width, first of all, depend on the sink.
Color spectrum.

Varieties of cabinets under the sink

Mainly used two types of cabinets for sinks: straight and angled. They differ from each other in their appearance and parameters.

A straight cabinet, as a rule, belongs to the category of traditional lockers. This is a standard floor furniture product. The presence of doors on it depends on the size of the bedside table: from 60 to 80 cm - two-door, and from 30 to 40 - one door.

Also, such a cabinet under the sink is quite functional. In the kitchen, under the sink, various shelves and rails are installed in the cabinets. But in order to mount all these devices, it is necessary large space for hidden eyeliner. And this is not very convenient, especially for small kitchen spaces.

As for comfort and practicality, their degree is quite high. This is achieved through the presence large area to get to the sink. But if the cabinet itself has volume, then its far zone will be difficult to access.

This kitchen sink is very reliable. With a curbstone there should not be any problems in the care. Especially if it is made of oak and beech. Also, such a piece of furniture can be made of MDF. Accordingly, its price will be much lower.

When choosing corner cabinets under the sink, pay attention to their appearance. They are:

As English letter"L" - quite easy to install and use furniture.
Trapezoidal - optimal for complex washing with various designs.

The corner view of the nightstands is more ergonomic. The cabinet is perfect for a small kitchen. Great option there will be a design with a countertop, to which the sink compartment adjoins. Narrow doors of about 30 cm are installed here.

At the corner cabinet with a sink high degree practicality. For a small kitchen, often install an L-shaped structure. Looks great when you open the door interior decoration locker and so you can quickly find the items you need.

Trapezoidal models are designed for more complex sinks. Rotating shelves are ideal for this furniture: when you sip on one, others follow.

The only one minus corner sink with a curbstone - its price. To buy it for the kitchen, you will have to spend several times more than when buying a direct cabinet.

Space for essentials

To create a harmonious background kitchen set and disguise various small items, use numerous elements for cabinets:

From the right choice this piece of furniture depends on how long it will last. Also before buy a sink with cabinet, you need to know all the parameters that are required for the kitchen in this case. In any case, this product should fit perfectly under the sink and, in addition to its functionality, bring aesthetics to the kitchen set.

Several types of cabinets under the sink

The sink is an essential element of any kitchen. The hostess spends a lot of time behind the sink, so it is important that this area is located as conveniently as possible. Unfortunately, not always the limited space of the kitchen allows you to rationally fit the sink into it. To solve this problem, special compact corner furniture is used.

How to choose a corner cabinet for a kitchen sink - types and criteria

Corner cabinet for sink furniture design, designed to be installed in a corner and built into a kitchen sink.

corner sink to the kitchen allows not only to save space, but rationally use corner space. In addition, it is located in the center of the kitchen set - this is good for organizing a working triangle.

In order for the corner section under the sink to be comfortable, functional and harmoniously combined with the rest of the interior, it is necessary to take its choice seriously. For this, the following parameters are evaluated:

shape and type of furniture;
its size;
the quality of the material from which it is made;
organization of internal space;
countertop.

Shapes and sizes of corner kitchen cabinets for sinks

Depending on the shape of the sink cabinets can be:

rectangular (L-shaped) - structurally they are two straight cabinets located perpendicular to each other;
trapezoidal - these are square cabinets with beveled corners.

It is important that the kitchen corner cabinet for the sink has optimal dimensions and fit both the headset and the sink.

The standard dimensions of this design are:

width - from 90 to 120 cm (at each wall);
height - from 70 to 85 cm;
depth - from 40 to 70 cm.

Materials for the production of corner cabinets for sinks

For the production of cabinets for sinks use various materials, the main requirements for which are resistance to temperature effects and the ability to keep their shape in conditions of high humidity.

Most often, furniture is made from:

Chipboard is an economy class material. In order for the construction of it to last for a long time, it must have a special coating. The main advantage of chipboard is wide selection colors;
MDF is a more environmentally friendly and reliable option. Cabinets for sinks made of MDF are much more expensive than those made of chipboard, and their performance much higher. They are not afraid high temperatures and do not deform under the influence of moisture.

For the production of individual structural elements, e.g. rear walls and facades irregular shape use DVP.

Features of the internal filling of the corner cabinet for the kitchen sink

A corner cabinet for a sink is usually equipped with a storage system, which can be represented by:

shelves - convenient option to divide the space into several zones. For example, the large lower section serves to accommodate a trash can, and the upper one - for household chemicals;
baskets with nets - ideal for storing various little things: jar lids, food film, packages, foil and others. It is best to use aluminum products, as they do not rust and will last a long time;
drawers - used to store cutlery and textiles. As a rule, drawers are placed at the top of the cabinet. So that they do not interfere with communications, they are made U-shaped.

The space under the sink can also be left empty - it is perfect for embedding some appliances, such as a dishwasher or washing machine.

Types of countertops

The table top is working surface washing cabinet. It can be used only for embedding a sink, or at the same time serve as an additional area for cooking and placing dishes.

The material of the countertop should be quite practical, resistant to mechanical damage and not be afraid of moisture.

These requirements are best met laminated chipboard and MDF. natural materials- wood and stone, not practical and require special care therefore it is undesirable to use countertops made of them in furniture for sinks.

If you want the countertop to retain its appearance for a long time, and small scratches were not noticeable, choose matte products.

Types and rules for choosing kitchen sinks for corner cabinets

Choose kitchen corner cupboard under the sink is only half the battle. It is important that the sink itself is reliable and easy to use.

When choosing a sink, pay attention to:

installation method;
shell shape and size;
equipment, number of sections;
the material from which the sink is made.

Ways to install a corner kitchen sink

Depending on the installation method, sinks are:

overhead - the easiest method: the sink is installed in a special recess with sides. At the same time, the size of the sink must exactly match the parameters of the furniture;
mortise - the sink is placed in a pre-cut hole corresponding to its size. The joints between the furniture body and the sink are closed with a gasket made of rubber seal or silicone;
undercounter - a variant of an overhead sink, in which the bowl is installed not on top, but on the bottom of the countertop and is supported by a special design;
integrated - this is the most expensive, high-quality and reliable way installation, in which the sink and countertop are made of the same material and form a single whole. There are no gaps or joints in this set. Due to the high cost, such products are made to order.

Shapes and sizes of kitchen sinks for a corner cabinet

Traditional sizes of sinks are:

50x50 cm;
40x50 cm;
50x60 cm;
60x60 cm.

Their depth can vary from 15 to 25 cm. If there is no dishwasher in the kitchen, it is best to choose a product deeper - from 16 cm, it is more convenient to wash tall pots, plates and other containers in it.

Many manufacturers offer sinks and custom sizes, though furniture for them will have to be made to order.

Please note that the distance from the edges of the sink to the sides must be at least 5 cm, otherwise the water will splash.

The shape of the sink is chosen based on personal preferences. Modern sinks can be square, rectangular, oval, round and even asymmetrical. But the most practical were rectangular and square options with smoothed corners - they can wash almost any dish. It is not recommended to purchase a sink with sharp inner edges - dirt will accumulate there, which is difficult to wash.

Kitchen sink equipment

The kitchen is an important element of home improvement. It carries an important functional load. It is here that food is prepared, the process of harvesting, conservation takes place. Most often, it also has a dining area for daily meals. Therefore, a reasonably planned space greatly optimizes all processes. This is especially true for small kitchens. Furniture kitchen set is the main forming element of this system. Rationally distribute workspace a corner cabinet for a sink for the kitchen, which will be discussed later, will help.

Before considering the main types of corner kitchen cabinets, let's decide for what purposes the corner segment serves and what functions it performs.

The meaning and functional loads of the corner cabinet under the sink:

connecting - that is, thanks to this segment, a transition occurs furniture set from one wall to another;
technical - one of the important nodes is located in it, namely the sink and communications to it. This main purpose - rationalizes the used area. Corner sink is convenient because it can be equidistant from the desktop and hob. This makes food preparation much more convenient. In addition, it can accommodate sinks of various configurations and sizes. Inside it, in addition to the communications drain system, there may be water filters, a flow heater, a garbage container, drawer systems for storage, most often household chemicals;
aesthetic function - this element fits organically into the common space.

Varieties

There are two types of corner sink for the kitchen: L-shaped with an acute angle, these sections are also called attached, and a cabinet for the kitchen with a beveled corner. They differ in internal overall dimensions, device, quantity and method of opening the doors, ease of use.

Corner cabinet for the kitchen under the sink, the main overall dimensions.

In kitchens made according to individual orders may be slightly different overall dimensions.

L shaped

Beveled corners

Choice of size and shape

In order to make the right choice of corner cabinets, you need to know their features, advantages and disadvantages. In attached sections with an acute angle inner space less than that of the second type of pedestals. They can be equipped with two doors or one that opens two sections at once (accordion door). The convenience of the second option is that access to the far corner inside the section is simplified. The corner cabinet for the kitchen under the sink with a beveled corner is more spacious, as it has a larger volume. It is possible to install a sink bigger size. In addition, they are convenient in terms of use, as the beveled corner makes it easier to access the sink. The disadvantages include the fact that she has only one small door.

The problematic place of the corner sections under the sink is the countertop. The standard canvas has a size of 60 cm wide. In the case when postforming, a laminated tabletop is used, a seam falls on the corner segments. This point is not relevant for cast countertops made of artificial stone. Corner overhead sinks are sold that fully correspond to the dimensions of the working surface of the cabinet. Or for this section, purchase a special postforming 120 cm wide.

What else you need to consider when deciding on the choice of the corner segment:

kitchen area. The bevelled section takes up more space;
you should immediately decide on the size and shape of the sink for the kitchen.

You can not immediately purchase it, but you need to choose a model and download it on the Internet technical drawing. When you buy a cabinet, take it with you and show the sales consultant a drawing. This will help to avoid possible errors;

material used to make kitchen and countertops. Remember that laminated board is most prone to swelling from moisture. Therefore, it is desirable that the surface of the countertop be seamless;
general style and interior design;
decide if there will be corner element be located additional elements: grinder, filters, flowing heater. In this case, it is reasonable to give preference to a segment with a beveled corner.

Only by summing up all these points, you can decide on the choice.

Manufacturing materials

When deciding on a cabinet, you need to be guided by the materials from which it is made. Main types of materials:

laminated board - an affordable option. This is, in fact, pressed glued wood chips covered with a layer of plastic. It should be noted that moisture should not get inside the plate. For these purposes, the ends, in the part where water can get in, are protected by an edge;
pedestals made of laminated board with MDF facades. MDF is wood waste crushed to a dispersed state, vacuum pressed under high pressure. the top plate is covered either thin layer special film, or veneer (thin cut of wood), veneered facades. The slab can be protected by staining. Painted MDF has a wide color scheme. Their advantage is also that they can be embossed. The facade does not require trimming the ends with an edge. The most popular and optimal, in terms of price-quality ratio, option;
natural wood - in the vast majority of cases, only facades are made from it. The tree, though the most environmentally friendly pure material, but also quite capricious. It must be well dried, expertly fitted and covered with special varnishes. These compounds protect it from moisture, temperature changes, mechanical stress;
facades made of plastic and glass - they are quite beautiful and expressive. But expensive, like wood. They are framed in aluminum end tape. Susceptible to scratches, glass, to chips and cracks;
cabinets made of food grade metals. It is most often furniture for food production where high sanitary and hygienic requirements are imposed.

Washing plays an important role in ease of use.

Wooden

Options for corner segments

There is a wide range of sinks on the market, including corner sinks.

What types can be used:

corner sinks - sinks are suitable for cabinets with an acute angle rectangular shape. For the second type, with a beveled corner, the choice is wider, since the working surface is larger;
round sinks 50, 60 cm standard sizes. It should be remembered that a section with an acute internal angle is also suitable for sink 50;
direct washing - most often manufacturers produce them in lengths of 60 cm (600 mm) and 80 cm (800 mm). The depth depends on the type of sink (consignment note or mortise) and shape.

Floor corner cabinet under the sink, its choice is directly related to the size and shape of the sink.

oval

Rectangular

Filling

Do not forget to take into account the interior filling of the cabinet. If there are concentrated technical knots(chopper, water filter, flow heater), it is wise to use a cabinet with a beveled corner, as it is more spacious. When you plan to use it for storage, then both options will do. You just need to decide on the dimensions of the stored things. This will determine the height of the shelves.

In the attachment segment with an acute angle, it is possible to use special retractable baskets, swivel shelves, which is quite convenient.

If a garbage container is located in the corner segment, then when planning the internal space, it is better to know its size in advance. Then you can rationally accommodate additional shelves.

Deciding what the corner will be floor element under the sink, consider the combination of the above factors. best material countertop fake diamond. Then a sink made of the same material is more suitable. If the work surface is covered with a laminated board top, then it is more correct to use overhead sinks.

A segment made entirely of laminated board is not much cheaper than a pedestal with MDF facade. Therefore, from an aesthetic and practical point of view, the second option should be preferred.

The main thing, for the safety of the cabinet - maximum protection prevent water from entering the plate. To do this, all possible joints are sealed with a sealant, the edges in contact with moisture are trimmed with a protective tape, and a furniture plinth is installed.

How to make your own

If you have certain skills, you can independently assemble the corner segment. laminated board best option for the kitchen with your own hands, from which it is easiest to make it.

The sequence of actions is as follows:

determine the type of section. To do this, consider the size of the room, and what will be located inside the segment;
check out the main types of sinks for corner cabinets. Both types are suitable for sink 50. Choose the best option and download the sink drawing;
think over and sketch a drawing of a cabinet with detailed dimensions;
with a drawing, contact a company that cuts laminated boards to size. They will also tell you where to purchase accessories and end tape;
when all the blanks are available, you can assemble the corner segment. To begin with, the sidewalls are mounted, they are attached to the bottom of the cabinet. Next, install and secure the connecting strips. Then the legs are screwed on. Mark and cut recesses for door fasteners. Install them, hang the doors. Depending on the type of sink, overhead or mortise, prepare the countertop in order to mount the sink. In order to make a hole in the countertop, use a jigsaw. Pre-make markings on the countertop in the form of a sink. The mortise sink is installed only on the sealant. It is important to follow the assembly sequence.

So, the floor corner segment for the sink is an important element of the kitchen furniture set. It carries a significant functional load. There are two main types of pedestals. Depending on a number of the above facts, one of them is chosen. A significant element is the shape and dimensions of the sink, internal filling. When choosing a material, interior design plays a major role.

Each owner strives to make it look cozy and beautiful, but at the same time be functional and comfortable. Big role in design comfortable kitchen furniture plays, in particular the corner cabinet under the sink.

Benefits of a corner kitchen sink cabinet

The main advantage of the corner kitchen sink with cabinet is rational use free space. After all, most of our kitchens are small. And the installation, consisting of two adjacent parts, between which there is a cabinet with a sink in the corner, is the best option for such a room.

Most often in the corner of the kitchen there is an input of all pipes: hot and cold water, sewerage. Therefore, it is here that it is most convenient to install a cabinet with a sink. In this case, the sink will be in the center of the entire kitchen set, and this will contribute to the convenience of the hostess during cooking.

The simplest one is L shape corner cabinet for sink. By opening the narrow door, you can easily and quickly get required item located inside.

But a trapezoid-shaped sink cabinet is considered especially convenient. Its large internal volume will allow you to place inside dishwasher or household water filters. Use such a cabinet under the sink to store various cleaning and detergents, trash can. Sometimes even a washing machine is installed inside such a cabinet.

The trapezoidal cabinet for the sink can be equipped with convenient drawers that slide out when the door is opened. In such compartments you can store voluminous and heavy dishes.

In addition, in modern models corner pedestals, you can install a shredder of organic waste or special sorting compartments for garbage: broken glass, plastic and paper. And in the farthest corner of a capacious pedestal, a water heater can be mounted.

Categories

Popular