Plastic windows care for rubber seals. Plastic window care

Until recently, plastic windows in our country were considered a sign of prosperity in the family and were considered as one of the elements of luxury. Only a few years have passed, and now the PVC window is the standard, minimum requirement, which should be present in the apartment by default.

Plastic windows owe their popularity to their reliability. It doesn’t blow out of them, they don’t need to be sealed for the winter, they don’t rattle and they don’t let smells or dust from the street into the apartment, cutting off numerous noises as well big city. In addition, they are practical. They don't need to be painted every one or two years, like wood, they are easy to clean and generally seem to last forever.

But such an impression is deceptive. A window can sag after just a couple of years of use if it is not properly cared for. Some breakdowns can be easily repaired, but others will cost you a pretty penny, even if you don’t even have to install new windows at all.

Don't know how to take care of windows, or have you forgotten the advice of the masters that they gave you right after installation? It's OK. AiF.ru will help.

How to care for plastic windows?

Like any complex technical mechanism, and a plastic window, of course, is such, PVC windows require some care. Otherwise, some of their parts or even all windows may become unusable.

Remember how you chose plastic windows for yourself? You should have paid attention to several of their components: fittings, profile and double-glazed windows. So you need to take care of all these elements.

Particular attention is required to the profile and fittings, which need periodic cleaning and lubrication. There are a few more “secret” places in your windows, which should also be given 10-15 minutes every six months, so that later you don’t get upset because of a window break. This must be done before the onset of winter, late autumn and already in the spring, when nature again begins to delight with warmth.

How to care for the profile of plastic windows?

profile in PVC windows they call the “skeleton” of this very window, what all the fittings are attached to ( metal parts). It looks like a big picture frame. And as the picture is inserted into the frame, a double-glazed window is inserted into the profile.

The profile is the most important part of the plastic window, and therefore it requires increased attention. The profile, apart from the transparent panes themselves, is the most visible part of the window. Most often it is white. First you need to wash it. But wash the window profile pvc is better just a special tool that will not only clean the dirt, but also protect the plastic from yellowing and fading in the sun. Many common cleaning products contain aggressive ingredients that can harm the appearance and even functionality of the profile. Therefore, we recommend using by special means. You can buy them in almost any salon where plastic windows are sold. Most often, these products are sold as part of a special care kit. plastic windows. You can safely take a set. We will also need all the other components of it.

One of the most important points in the care of windows is to pay attention to the rubber seal, which is located along the perimeter of the profile in the PVC window. It is he who is responsible for ensuring that neither noise, nor smell, nor dust, nor even cold penetrate our apartment. The effectiveness of its work depends on its elasticity. But, if you do not take care of it, it hardens and undergoes deformations, gradually losing its protective functions.

To prevent this from happening, it must first be wiped. It is better to do this with ordinary soapy water, which will not disturb the structure of the seal in any way. When the seal is clean, it must be lubricated with special silicone oil, which should also be in the plastic window maintenance kit. It is silicone oil and will allow the seal to last years stay flexible and protect you and your apartment.

Another important point- drainage holes, which are located in the lower part of the profile under the window sashes. These holes also need to be cleaned. This can be done with a vacuum cleaner or a suitable brush or an old toothbrush. After cleaning, we advise you to pour some water into the drainage hole, which will help to remove dirt from nooks and crannies. Moisture is removed through these holes, with which small debris can get there. That is what needs to be cleaned up.

How to care for plastic window fittings?

Accessories, all metal elements plastic windows also require careful care, without which they may soon become unusable.

First you need to clean them up. This is best done with a soft cloth dipped in soapy water.

After we have cleaned the fittings, they must be lubricated. For this, both ordinary engine oil and special oil are suitable. Silicone Grease, which is also part of a special set for the care of PVC windows.

It is necessary to apply not a large number of lubricants on the hinges at the place of their joining with each other. After that, you need to move the window back and forth so that the lubricant penetrates the hinge. The same action must be done with the shutter mechanism. After lubrication, it must be closed and opened several times to allow the lubricant to penetrate into all parts.

After that, double-glazed windows remained, which can be taken care of like ordinary glass - washed with specialized products as they get dirty and avoid strong blows on them so that they do not lose their tightness.

Plastic windows have already become familiar in our apartments. Many are so accustomed to them that they never paid attention to their content after installation. Meanwhile, with a negligent attitude to such windows, problems may arise associated with their deformation, loss of an attractive appearance and premature wear. Timely and competent care of plastic windows, which we will discuss below, will help to avoid all these problems.

Interesting moments of operation

It is important not only to create the necessary conditions indoors, but also respond appropriately to emerging situations. Consider the basic subtleties of using plastic windows so that you can figure out what is good and what is undesirable.

The normal humidity level in an apartment is usually 40-50%. It is this level that must be adhered to in the process of living in your home.

Apartment in without fail must be provided with ventilation. Usually there are ventilation outlets in the kitchen, toilet and bathroom. It is necessary to periodically check the hood for serviceability and, if problems are found, immediately begin to solve it.

Check the quality of work exhaust duct easy - just attach a paper sheet to the ventilation inlet - a well-functioning hood will hold the sheet in place.

High-quality plastic windows perfectly isolate the room from the effects environment on the street. At the same time, excess moisture may form in the room with such tightness. To avoid this problem, it is necessary to ventilate the room a couple of times a day for 10-15 minutes. This is done at any time of the year.

To avoid condensation on the surface of the plastic window, ventilate the room regularly

Too much wide window sill, which prevents warm air from the battery from rising up - an undesirable element in the room. Its width should not interfere with the normal circular circulation of air.

Now about the plastic windows themselves. They should be protected from contamination by washing off dust and dirt with warm water or soap solution. The rubber seals are treated with a silicone-based lubricant and the fittings are lubricated twice a year.

If you follow all the above rules, then the windows will always be dry. In extreme cases, on the bottom of the glass you can sometimes find a strip of moisture a couple of centimeters wide.

When approaching winter cold the reciprocal levels of the clamping locks are placed in the "winter" position - this allows to ensure tightness in the place where the frame adjoins the sash.

Photo gallery of window cleaners

window cleaner
window cleaner Complex set

Room ventilation

Since windows from PVC profiles perfectly isolate the room from influences weather conditions from the street, excess moisture can accumulate in the room, which we then observe on the building envelope in the coldest places. This is especially true in the kitchen. And if in the warm season it is just condensate, then in winter it turns into ice. To avoid such a nuisance, you need to regularly ventilate the room. If for some reason you cannot or do not want to do this, ensure that the desired microclimate is maintained in the room by setting reliable system ventilation or air conditioning. It is also important to circulate warm air from radiators to glass.

The humidity index in any room of the apartment should not exceed 55%.

PVC frame

PVC itself does not like to interact with acidic compounds. Therefore, if you are going to wash windows, process outside soap solution. Instead, you can also use a special detergent, but with one condition - it should not contain abrasive, acetone or solvent. The composition is applied to the surface with a linen cloth and left to dry. The frame will then need to be rubbed dry or wet wipe. Since PVC does not tolerate rough handling, try not to hit or scratch the outside surfaces of the profile.

It is better to clean windows with the help of special tools and a soft cloth.

Rubber seals

Despite the fact that seals in plastic windows are made of high quality elastic material, they are also subject to aging. To avoid this, clean them of dust and dirt at least once or twice a year. In this case, they will be able to properly perform their function for many years - to protect the room from moisture and drafts.

Window handle and drain

It happens that the window handle can become loose. This problem is solved after tightening the screws on the decorative plate, which has previously been transferred from vertical to horizontal position.

On a loose window handle, it is enough to tighten the screws

Inside any plastic window, more precisely in its lower part, there is a drainage channel that accumulates moisture in itself. It is easy to find by simply opening the sash. As he plays important role, do not deprive it of attention and periodically clean it from dirt.

Hardware care

Accessories, like everything else, must also be in perfect working order. It is necessary to periodically check its condition and quality of work. This is done according to the following criteria:

• How easy is the sash to open?
• Quality of fastening of fittings;
• The degree of wear of fittings;
• The presence of damage on them.

Hardware needs to be lubricated once or twice a year for best performance.

Let's consider these criteria in more detail.

The ease of movement of the sash is easy to check by simply opening and closing it. In which case, you can always adjust or lubricate the fittings. In plastic windows, fittings are adjusted along three axes.

Fastening hardware parts is what determines both the operation of the window and the safety of its operation. Screws in plastic should be periodically checked for secure fastening and fit. In case of loosening of the fastening of the screw, it is tightened.

As for the wear of fittings, everything is simple here - periodic lubrication important details like scissors and loops helps to extend their life.

Any damaged part needs to be replaced, it is especially important to remember this in relation to critical parts.

Such moments as the replacement of parts, their adjustment, as well as the removal of the window sash or its installation should be carried out by craftsmen, since independent activity often leads to window failure.

Golden rules of fittings

Accessories must be protected from dirt and various factors that arise during repair and construction works, be it paint, plaster, etc.

Cleaners and detergents that contain an acidic or other aggressive compound should be excluded from the list of window care products.

It is necessary to lubricate moving parts and tilt-and-turn fittings in places of constipation. Lubricants or machine oil are applied with a brush.

Choose your window cleaner carefully. They should not adversely affect anti-corrosion coating windows.

Precautionary measures

The window sash, which is in a vertical position, should not be additionally loaded.

The window sash and slope must interact smoothly and gently - their impact collision or strong pressure is unacceptable.

There must be no foreign objects between the frame and the sash.

At strong wind do not leave the window open, it is better to use a comb.

In order not to worry about the position of the window sash in strong winds, use a comb

Operation of windows (video)

Plastic windows are able to please with their work for many years, but for this you need to follow some recommendations:

• Rubber seals are lubricated with a silicone-based lubricant, and the fittings are lubricated twice a year;
• The sashes are washed with a soapy solution and special acid-free products, otherwise the shade paintwork will change;
• To avoid condensation, ventilate the room and keep the humidity at 50-60%%;
• Avoid mechanical and impact loads on the design of windows;
• Self-repair of aluminum structures under warranty service is not allowed.

Dealing with fogging windows

The double-glazed window must not fog up between the panes. If this happens, then there is a marriage in it. In case of detection of such a malfunction, contact the manufacturer - he is obliged to replace the double-glazed window with a serviceable one free of charge in the event of a valid warranty period.

The fogging of the glass from the side of the room indicates high humidity in the room and low temperature the inner glass of the double-glazed window. Since the reason for this phenomenon is poor ventilation of the room, it is necessary to ventilate it, adjust the ventilation system. To increase the temperature of the inner glass of a double-glazed window, it is necessary to allow the flow of warm air to flow freely from the radiator to the window, while eliminating all possible obstacles (the radiator screen can be removed and the blinds moved apart).

Water vapor, lightened on the glass, is removed with a cloth soaked in a solution of purified glycerin and ordinary / denatured alcohol in a ratio of parts 1:20. This method is considered one of the most effective. Every two weeks, the windows are wiped with a dry cloth and a new layer of mortar is applied to them.

Plastic windows are initially created with a large margin of safety, which ensures long-term stable and high-quality work. However, you should not rely only on the manufacturer. If at first the windows will work properly without your attention, then they will need regular care, which will not require much time and effort, but at the same time will allow you to work out the time laid down in the manufacture.

Plastic windows are distinguished by tightness, aesthetics, accessibility and easy installation. However, in the absence of proper care, problems such as yellowed plastic, loose fittings and cracked rubber seals can occur. But twenty minutes of cleaning every month will keep the quality and presentable appearance window structures.

At proper care plastic windows will easily last for several decades. It is important not only to wash and clean products regularly, but also to protect structures from mechanical damage, exposure to hot objects and high temperatures. In this article we will look at how to care for plastic windows with your own hands.

When caring for plastic surfaces and double-glazed windows, it is important to pay special attention to the selection of cleaning and detergents. In this case, do not use abrasive and caustic compounds, concentrated solvents and lubricants containing resins, hard hard sponges.

They can scratch products, change the shade of windows and provoke the appearance of yellow streaks.

Periodically open the windows and ventilate the room. Because of negative impact temperature differences, the glass fogs up, and condensation appears inside the room. Regular ventilation will secure the structure, provide a comfortable microclimate in the room and increase service life windows.

The operation of plastic windows should be careful and accurate. Do not put heavy and hot objects on the windowsill, protect glass and frames from scratches and bumps. Clean the outer parts of windows in calm, warm and dry weather.

Plastic quickly attracts dust, so wipe the frame and window sill regularly. How to effectively wipe the dust so that it does not sit longer, read.

How to properly clean plastic windows

General cleaning and washing of window structures from the outside is done in the warm season, in spring or summer. winter care behind plastic windows and window sills is carried out by washing from the inside.

It is necessary to clean not only the window sills and frames, but also the fittings and the rubber sealant located around the perimeter of the sashes and frames. In addition, drainage or drainage channels, which are located at the bottom of the window structure, are cleaned of dirt.

For regular washing, ordinary water and a soft cloth will do. A dusty but not dirty surface is wiped with a damp and wrung out microfiber or wool cloth. To get rid of dust for a long time, you can drop two or three drops of rose or lavender essential oil on a cloth.

To remove dirt and stains, dilute in warm water liquid soap, grated on a coarse grater, solid soap or standard washing powder. In addition, you can use specialized products for cleaning plastic windows and glass.

Care of seals, accessories and other elements is carried out using a soapy solution and a soft sponge or cloth. Twice a year, moving parts and rubber seals must be treated with special grease or oil. The procedure is performed after washing the windows.

Caring for different window elements

• Plastic frames, window sills and profiles are regularly cleaned of dirt, dust and other contaminants with a soft cloth and gentle detergents or plain warm water;
• Double-glazed windows are washed with special cleaners for glasses and mirrors using a soft cloth. If you use cleaners containing alcohol, do not allow the product to get on the rubber seal!;
• When caring for fittings, it is important to ensure that the elements are securely fastened. If the parts are loose and begin to dangle, you need to immediately tighten the elements. To do this, gently lift under the handle decorative panel and flip it to a horizontal position. Then tighten the fasteners and screws that secure the handle to the frame;
• After cleaning, the seal is lubricated with specialized compounds;
• Every six months, lubricate fittings and moving objects using specialized lubricants without acid and resins. By the way, suitable oil for sewing machines or machine oil;
• Caring for rubber seals involves cleaning every six months using cleaning products that contain glycerin;
• The mosquito net is used in the warm season, and in winter it is stored in a room with good ventilation. After you have removed the mesh, wash the product with warm soapy water, dry and store. Before placing, wipe the mesh with a dry soft cloth or clean with a brush.

What to do if plastic windows turn yellow

Over time, the plastic turns yellow due to exposure to ultraviolet radiation and high temperatures. To avoid this problem, you need to regularly wipe the surfaces. window frame damp sponge, cloth and paper towel. But if the plastic has already turned yellow, there are several easy methods to remove the yellowness at home.

Surface first plastic products need to prepare for the procedure. To do this, remove parts and accessories, which are soaked separately in a special cleaning solution. Window frames are cleaned of dirt with soapy water or specialized tool for washing plastic surfaces.

A light coating of yellowness is removed with a soapy solution or kitchen detergents. Vinegar, 30% hydrogen peroxide and alcohol or acetone cope with yellow stains. In the first case, 70-80% vinegar essence is used.

You can also take special spray cleaners for plastic surfaces. When using alcohol or acetone, make sure that the solution does not get on the rubber seal!

Plastic windows are becoming more and more popular among the owners of city apartments and suburban housing due to ease of use, tightness, high degree sound insulation, simplicity and unpretentiousness in caring for them, and also due to the fact that they do not require additional insulation before the onset of cold weather and painting to give decorativeness. However, you still cannot do without such a procedure as lubricating plastic windows with your own hands. In addition to lubrication after long-term operation of mechanisms, sometimes they need additional

To carry out these processes correctly, without resorting to outside help, you need to study some of the nuances associated with them. Moreover, to do this work is quite easy, having necessary tools.

With long-term operation of plastic windows, especially if they are installed in the houses of large cities, where there is a high intensity of traffic, a large amount of dust and dirt gets into the mechanisms.

These unwanted contaminants settle on the lubricant used in their manufacture, mix with it, which begins to make it difficult for mechanisms and fittings to open and close. In addition, the old dirty grease, saturated with microparticles, gets a pronounced abrasive effect, instead of preserving parts and imparting antifriction properties, on the contrary, it leads to their accelerated wear and can completely disable them.

If a to not pay attention to malfunctions in the operation of the valves, before they completely break down, they kind of “warn” that they urgently need prevention, starting to make a sound of clicks, creaking or grinding.

These sounds indicate that quality lubrication there are practically no mechanisms in the mechanisms, and friction of individual metal parts of the window occurs from each other, and this leads to metal abrasion. The tyranny process adds metal dust to the dust and dirt from the street, which can interfere with the normal operation of the lock, and the handle will be hard to turn without completely closing it. These processes will violate the tightness of the fit of the sash to the frame, and cold air gain access to the premises.

If the frames have been installed for a long time, and one of the elements of the mechanism is out of order, it may also happen that such a spare part can no longer be found, due to the removal of this system from production. In this case, you will have to change the entire "stuffing" of the mechanisms to a new one, which will be very expensive. In addition, sometimes it is simply impossible to fit new mechanisms to previously installed frames, so you have to completely.

This explains the urgent need for periodic preventive maintenance of the working mechanisms of windows. These works are not difficult, but they will help to maximize the life of plastic windows and avoid expensive repairs.

You need to know that manufacturers give a guarantee for window fittings for only 4 ÷ 5 years - this is the period for which factory lubrication will be enough. Sellers do not always warn about the need for preventive measures, and the owner of the windows himself thinks about it only when a creak or rattle appears, although sometimes it is too late to do anything. Therefore, you should not rely on guarantees and wait until the end of the deadline - you need to make it a rule to regularly pay attention to windows.

Lubrication intervals

The frequency of lubrication of metal fittings may be different. If initially for this process were used quality formulations , and the house is located away from major highways, then it is enough to carry out prevention once a year, best of all - with the onset of warm spring weather. Under more severe operating conditions of windows, in which severe contamination of fittings occurs, it will be necessary to carry out measures to lubricate moving parts more often, about two to three times a year.

How is window lubrication done?

When it comes time to carry out preventive maintenance, the question arises of what is the best way to lubricate. In principle, any technical oil that lubricates mechanisms is suitable for this process. Most often they use the usual machine, which is present in every house where there is Sewing machines. You can also use a silicone-based lubricant. However, there are also special formulations designed for such a procedure.

They are sold in metal cans and in plastic bottles with nozzles convenient for lubrication.

One of the most popular lubricants among home craftsmen is WD-40.

WD-40 is one of the best and most user-friendly lubricants.

Processing must be subjected to all movable mechanisms of the system of fastenings and constipation. The process is carried out as follows:

• The sash of the window opens, and all its sides are examined.
• Further, soft cloth dirt is removed from the fittings along with the old grease, as new composition must be applied to a clean surface. You can use a sponge or long-handled brush to clean some areas.
• After cleaning, the mounting brackets, bolts, latches, handle mechanism and other moving parts that ensure the closing and opening of the sash are abundantly lubricated.
• Spraying the agent from a cylinder is more preferable, since the agent applied in this way is able to penetrate even into the most inaccessible corners of the moving mechanisms. For convenience, many lubricant bottles are equipped with removable tubular "nozzles", with which you can apply the lubricant composition to the parts of the mechanism hidden by the frame body.
• If grease is used in vials, then 1-3 drops are dripped onto each of the parts.

• In order not to spoil the window fasteners, you should not experiment and use vegetable or butter, various cosmetic gels and petroleum jelly, as well as other similar substances that are not intended to facilitate the operation of moving mechanisms.
• Lubrication of all elements of the window frame and sashes is carried out simultaneously.

Do not ignore the rubber seals. They must be treated with a composition specially designed for them, preventing them from drying out, losing elasticity, otherwise the necessary tightness will not be achieved. casement to the frame, the sealing of the window will be broken with all the ensuing consequences - the penetration of cold, noise from the street, the ingress of dust.

If in time to carry out the prevention of all mechanisms and elements, then window system will last a long time without failures and will not require replacement of individual parts. In addition, lubrication will help eliminate the risk of drafts and heat leakage from the premises of the apartment.

Video: preventive maintenance tips for plastic windows

Checking and adjusting plastic window fittings

Fittings include all metal and plastic elements, which are equipped with plastic windows, both movable and permanently installed. If they break or become loose, the window system will not be able to perform the functions assigned to it hermetic closing, free opening of the sashes and setting them in different positions.

For example, the handle mechanism is designed in such a way that it allows you to open the window wide open or just open it slightly at the top for ventilation.

Some elements of fittings provide a smooth ride, thereby eliminating the breakdown of mechanisms. Other details are designed to regulate the uniformity and force of pressing the window sash to the frame, providing not only heat preservation, but also sound insulation.

Find out, and review the causes and remedies, from our new article.

In order for all these elements to work effectively, the prevention of windows, in addition to their lubrication, also includes the periodic adjustment of some parts. However, it should be noted that adjustment is carried out only when clearly necessary, and only in cases where the window does not close completely or the handle does not turn well. Both processes - lubrication and adjustment are usually carried out in combination. To do this, you will need some tools, which, by the way, may not be in the owner’s “arsenal”, but they can be purchased at hardware stores.

• For example, you can not do without a 4 mm hexagon curved shape.

Such part keys are used when assembling furniture, so they are probably in the furniture fittings departments. In most window systems, it is this hexagon that becomes the main tool for adjusting mechanisms.

• Certain difficulties may arise with a screwdriver. It’s good if the fasteners on the window are designed for a regular curly screwdriver (usually a “troika”). But there are window systems on which torx stars are used.
• Pliers are likely to be in every home.

Adjustment of individual mechanisms of plastic windows is carried out to eliminate the problems that have arisen, which can include:

• difficulty in moving the sash when opening or closing;
• the occurrence of sagging windows or doors;
• the appearance of cracks, that is, a violation of the tightness in the closed state of the valves;
• if it is necessary to replace individual elements, due to their failure;
• when the window system is switched from the "summer" mode to the state for winter operation.

Starting the adjustment, you need to know exactly how it is carried out, and which elements are subject to it.

The process of regulating the window mechanism is carried out according to the basic points, which include:

• Accurate installation of the window sash horizontally;

• Similar actions vertically;

• Adjustment of the required tight clamping of the sash;

• bottom opening angle of the sash in ventilation mode.

When adjusting the elements of the window, turn the adjusting screw clockwise or in reverse direction. Depending on the side where it turns, the sash will move.

When changing the position of the sash, after each turn or half turn of the screw, it is necessary to check the operation of the window system. If necessary, the screw is turned back a certain angle. It is not recommended to turn it immediately over a long distance - it is best to do this gradually, shifting the position of the sash by 0.5 - 1 mm.

In addition to the base points, the fasteners are adjusted, which are installed using bolts with a slotted head for a curly screwdriver. If necessary, you can loosen or tighten the fastening of the adjusting elements with the necessary change in their position.

• adjust pins;

• bolts in the "scissors" system;

The level of tightening of screws in the scissor system is checked

• fastenings in the upper canopy;

• fastenings in the lower canopy;
• clamping mechanism;
• balcony magnetic latch;

The handle can also become loose - the screws need to be tightened

• window opening mechanism.

Video: how to care for plastic windows

Mechanical part in plastic windows different firms It is arranged, as a rule, according to one principle, so the adjustment instructions should fit any of them. Each manufacturing company that respects itself and its customers gives detailed descriptions their products and advice on how to care for them. If you wish, you can always refer to the primary sources, knowing which company's windows are installed in the apartment.

Having all the necessary tools and lubricants, going to work without haste and understanding the design of the mechanisms, it is quite possible to carry out this work on your own.

Find out what you need, as well as consider the types and methods of installation, from our new article.

After installing plastic windows, of course, you will be interested in the answer to the question of caring for them. Profile systems PVC does not require special attention. However, they need minimal proper care.

Plastic windows have many advantages. But to feel them fully, you need to regularly perform quality care winter and summer.

Frame

Cleaning plastic frame, unlike wood, much easier. This material is easy to clean and does not need to be treated with protective compounds.

Caring for plastic windows with your own hands primarily involves washing this component.

The frame can not only get dirty, over time yellowness appears on it, which is a little more difficult to get rid of than dirt and dust.

1. Use a sponge with a soft side to remove dirt. Enough conventional remedy for washing dishes. It copes well with any stains, except for yellowness.
2. Do not use powdered products, no matter how the seller advertises them. Such compounds scratch the surface. Do not use Pemolux, acetone, solvents, acid and alkaline solutions.
3. You can not apply too much effort when. Polyvinyl chloride is a fragile material, you can’t press hard on it, it can burst.
4. Pieces of dirt, mounting foam or cement must not be scraped off sharp objects or something else. You will need to buy a professional reagent that can remove such contaminants.

When caring for plastic windows, the frame is cleaned first. It accumulates the most pollution.

PVC surfaces and aluminum profiles can be washed with cleansing milk. For example, from Nowax "Cockpit Milk".

This tool easily copes with dust, fresh and old stains. It will also remove yellow stains.

Mode of application:

1. "Cockpit Milk" is applied to a soft, lint-free cloth.
2. The material is passed along the surfaces of the frame.
3. Cockpit Milk should be rubbed into the PVC in a circular motion until it shines.

Cleansing milk does not need to be rinsed off. It creates thin film on a surface that prevents long time re-deposition of dust.

Double-glazed windows

Caring for modern double-glazed windows is no different from washing Soviet windows. The only plus of current windows is that they do not need to be washed inside. Dust does not collect there, since single-chamber, two-chamber and three-chamber double-glazed windows are hermetically sealed.

First of all, caring for them is protection from shock and damage. The main thing is to prevent the appearance of cracks and scratches so that it is possible to operate them for decades.

How to care for plastic windows -:

1. The internal parts do not need to be washed, they do not get dirty, because they are hermetically sealed. But the outer sides need to be cleaned regularly so that the apartment gets more light. To do this, first remove dirt and dust large quantity water. Do not scrape off dried foam or cement, but moisten it well, and they themselves will lag behind the glass. Change water as needed. Dirty do not wash, because it accumulates dirt that can scratch. Finally, wipe the glass with newspapers. They shine beautifully.
2. If there greasy spots, wash the glass with soapy water. Use the cheapest shampoo or dish detergent. Finish with a rinse clean water and wiping with microfiber.
3. Buy a rubber scraper from the store. This is effective if the house was being renovated and there are drops of paint and other products on the glass that are difficult to remove from the surface with water.
4. For the care of plastic windows use and folk recipes. Glass is cleaned with water mixed with vinegar, salt or ammonia. You need to work with gloves.
5. You can wash glass without water. Use Mister Muscle and similar professional reagents. Proceed according to the instructions and wear gloves.
6. The last and most expensive window care product is wipes and monitor fluids. They are sold in small bottles, effective, economical, but too expensive.

Glass cannot be cleaned with washing powder and other similar cleaners. It is also forbidden to use iron scrapers and hard brushes.

The elastic seal around the perimeter of the sash and the skylight also needs to be maintained. This component of the windows is necessary so that the sashes fit snugly against the frame, do not allow air and moisture to pass through when closed.

The rubber wears out quickly if it is not properly cared for. Over time, it begins to let cold air into the apartment and needs to be replaced.

Therefore, it is useful to learn how to properly care for the elastic seal immediately after installation of the structure.

It is necessary to lubricate the gum around the perimeter of the sash once a year. This is quite enough for the window system to receive good service.

It is advisable to do this in spring or autumn.

PVC window care kits:

1. Fenosol retains the original elasticity of rubber parts and increases wear resistance. This is a unique liquid for all occasions, which has found its application in PVC sphere windows.
2. BE Edel Weiss is a set that includes 4 products. This is a detergent for the profile, a bottle for an elastic band, for lubricating fittings and a napkin. The composition for lubricating gum is of high quality and is made from good raw materials, it is tested, it is not harmful to humans. This is not silicone grease. The agent is absorbed into the sealant, keeping its elasticity for a long time.
3. WD-40 is a general purpose lubricant. It is used for cars, doors and other fields. human life. This composition is not only the most recognizable, but also one of the most accessible. WD-40 creates gum on the surface waterproofing film, due to which the elastic seal does not burst when low temperatures and serve for a long time.

Plastic windows must be treated with similar compositions. Otherwise, the rubber seal will begin to crack and tear in a couple of years.

All PVC structures, as well as metal-plastic ones, are equipped with high-quality fittings. These elements are practically maintenance-free, however, in order to increase their operational life, they sometimes need to be lubricated.

Take care of the fittings in the following way - basic rules:

1. It is impossible to wash moving mechanisms with water, they can become rusty.
2. It is forbidden to use industrial vaseline, acid solutions and resins for cleaning.
3. It is impossible to buy hard brushes and metal ones to remove dirt, they will damage anti-corrosion coating and rust will start to show.
4. 3 years after the start of operation, plastic windows begin to lubricate the moving mechanism with special lubricants. For these purposes, you can use oil, BE Edel Weiss products and WD-40. Lubricants are added to the slots of the fittings, they can also process other mechanisms that are in sight (for example, those that are on the side to fully open the window).

All fittings should be protected from dirt and staining. If this requirement is violated, then cleaning is carried out at the expense of the owner, even if there is a valid warranty.

These window elements are also made of plastic. You can’t lean heavily on window handles; its mechanism wears out quickly even without it.

If it does not turn well or jams, the fittings are most likely clogged. It is necessary to disassemble it, and remove particles of dust and dirt from the frame sash.

If you hang something on it, lean on it, or the child pulls the handle and it loosens, then you need to tighten the screws.

It is better to call the master, but you can do it yourself if you have at least a little knowledge and skills.

Action algorithm:

1. Raise the decorative bar under the handle.
2. Turn her out vertical position to horizontal.
3. Tighten the screws quickly, they are located under the handle.
4. Then put the bar back in place.

Window handles are very flimsy and break quickly. To extend them operational properties and not break, use them correctly.

Try not to lean on the handle or use force when turning to the desired position.

Drainage holes are drainage holes. They take water out of the windows, which gets there due to bad weather conditions.

The drains are located at the bottom of the body. They are located in places where the window sashes open. Open it up and look down, below the rubber seal at the joint and there is a water-repellent hole, as well as on the outside.

Drainage holes are clogged. Over time, a lot of dirt accumulates in them, which flows down the glass and falls into this hole. So sometimes cleaning is necessary.

To unclog drainage system All you need is a vacuum cleaner. There is no need to use special cleaning compounds.

First wipe the window of dust and remove the dirt from the drain hole with a brush. Then take a vacuum cleaner, put it on the drain hole, and pull out all the dust.

Water-repellent holes need to be cleaned from the inside and outside, they are hidden under the plugs.

If it was not possible to completely clean the drainage system, use a wire. Stick it in the hole under the plug and pull out all the dirt.

How to avoid sweating?

Caring for plastic windows in winter also involves the use of anti-fogging agents.

Since the "dew point" does not have the option of physical adjustment, it can only be influenced by changing the temperature inside the room.

Tips for preventing window fogging:

1. Increase the humidity in the room to 50%.
2. Do gravity ventilation. It will be enough to remove water vapor, carbon dioxide from indoors to outdoors.
3. Ventilate the room more often, you can always keep the window open in summer, and open it several times a day for 10 minutes in winter.
4. To prevent the windows from misting up, install supply valves, heating structures or intra-profile ventilation.
5. Another option is to install a moisture absorber. Such a container can be bought at a building supermarket.
6. Glass can also be processed special formulations. They are sold in the form of aerosols and liquids, and are intended for cars, but they are also used for PVC windows.

The fogging of the glass threatens to moisten the entire structure. Mold will appear at the top, bottom and sides, then it will smoothly move to the walls of the apartment.

Therefore, you need to deal with this problem and not ignore the dew drops.

Proper care PVC designs extend their service life. It must be rendered not when the time appears, but when it is required. Lubricate the movable joints, wash the glass and the frame, clean the drainage system and then the plastic windows will last for decades.