Smart pull-out systems for the kitchen - drawers and shelves that every housewife dreams of! Choosing filling for kitchen cabinets: the best ideas for competent organization of space
Proper cuisine- one in which you can conveniently arrange the necessary items: "holiday" and everyday dishes, household appliances, Food, detergents. All this should not only be stored in best conditions but always be at hand. To achieve such versatility, you need to carefully consider the content for kitchen cabinets. Often, kitchens do not have a large area, which further complicates the task. However, everything is possible. Consider options for solving the problem.
During cooking, the hostess constantly moves within the working triangle "sink-stove-refrigerator", which combines three main zones - cooking, washing, storage. It is here that the most necessary items should be located. They are placed so that it is easy to reach everyone and do not have to reach too hard. For this, floor cabinets and lower shelves are best suited. wall cabinets.
Modern multifunctional kitchen
Filling floor cabinets headset
The internal filling elements of kitchen cabinets are thought out so that every centimeter of the area is rationally used and brings maximum benefit. There are many devices that help with this: hinged, pull-out elements, roll-out baskets, carousel shelves for floor pedestals. Additionally, you can use multifunctional kitchen sets, special racks, stands, holders and other storage systems.
9 Best Ideas for Arranging Headset Drawers
Saving space and time of the hostess should be the main principle of kitchen equipment. No matter how beautiful the facades of the headset are, it is important what is hidden behind them. There are some good ideas on how to improve the drawers of floor cabinets.
Module cases with drawers
- Full extension drawers. The doors of the base cabinets look beautiful and can be very convenient if you think about filling the kitchen, but when opened they take usable space and sometimes get in the way. The problem is solved very simply: instead of shelves with doors, cabinets are equipped with drawers. By installing fittings for full extension, you can get full access to every little thing stored in the locker.
Advice. The benefits of fully extendable drawers are obvious: all items are visible. But there is another advantage besides convenience. The hostess does not have to squat and bend down to reach the right things on the shelf. This is perfect solution for women of age, as well as those who have problems with the lower back or joints. In addition, you do not have to think about installing a backlight.
Scheme of cabinets with full extension guides
Storage cabinet SPACE TOWER by Blum
- Great depth and high walls. There are many household items that are very inconvenient to store in small drawers. By adding a few centimeters of depth and high walls, you can significantly increase the usable space.
Deep drawers with high walls
Convenient deep drawers with full extension
- Increasing the width. It makes sense to install cabinets with narrow drawers only in cases where there is not enough space for wide floor cabinets. If the kitchen area allows, it is better to equip wide drawers. The absence of partitions will save space, and convenient dividers will help to organize it properly.
Dividers will help to organize the interior space of wide drawers
- Use of pneumatic mechanisms and closers. Wide, top-loaded drawers are difficult to pull out. In order not to exert extra effort, they are equipped with pneumatic shock absorbers. They provide soft sliding structures along the guides. It is very comfortable. Firstly, there is no risk of spoiling the furniture, because. it is impossible to jerk or push the box sharply. Secondly, shock absorbers reduce noise levels. The cabinet does not rattle or knock when opening and closing.
Furniture with pneumatic shock absorbers
- The use of separators. The right dividers solve the problem of functional filling for kitchen drawers. They can be installed in any direction - along or across the box. If necessary, you can easily change the configuration. Order in storage systems is guaranteed.
- The most necessary - in the upper drawers. Determining the filling kitchen set, you should immediately take into account that frequently used things should be placed as close as possible, best of all - in the very top drawers. They can be made lighter by making them with less high walls than the rest, and placing them immediately below the countertop. It is important not to overload them, otherwise, due to frequent opening, they will quickly fail.
Convenient top drawers
Cutlery organizer
- translucent walls. Designs made of translucent materials always look impressive. They visually facilitate the interior of the kitchen as a whole. An additional advantage: the contents of the box are in plain sight.
Headset with translucent elements
- Two drawers behind one front. This is a good idea for under-counter cabinets. So that the cutlery storage boxes do not stand out from the rest, they can be closed with one facade.
- Lack of handles. Drawers without handles are not for everyone, but for those who appreciate ultra-modern interiors, this is a great option. Smooth surfaces facades look stylish, and open with a special mechanism that works when pressed.
Convenient and functional filling of kitchen cabinets
Even in the smallest kitchen can fit great amount items, if you correctly select the filling of kitchen cabinets and use hinged structures (racks, shelves, special holders) wisely. Consider the most popular and convenient storage organization systems.
Option 1: dish dryers
It is impossible to do without a dryer in the kitchen. This is a special device designed to store washed dishes. There are built-in and independent designs. The former are installed in cabinets or sinks, and the latter are installed separately from the kitchen set.
Retractable model for floor stand
Note! Closed dryers are convenient in that the dishes remain clean in them and are not covered with dust, while open dryers are cheaper and can be placed anywhere.
Built-in dryer with light
There are single and double deck designs. Single-tier dryers are designed to accommodate plates, dishes, salad bowls, and you can additionally put cups and glasses on two-tier dryers. Some manufacturers produce bunk corner models. This is a great option if there is a free corner, however, such dryers are much more expensive than traditional ones.
Troflex dryers are in fashion. They are beautiful, functional, differ in unusual forms. This design can be installed on the sink or next to it. As a rule, fixtures are made of steel with anti-corrosion coating. Shiny surfaces can be used as an additional interior decoration.
For making dryers different designs usually use stainless steel or plastic. Steel models are much stronger, more durable, more stable, and plastic models are cheaper. Final Choice always remains with the buyer, but the metal is out of competition. In addition to high performance characteristics, it is also environmentally friendly. Cheap plastic models can be made from toxic raw materials.
Option 2: cutlery trays
An important element of filling systems for the kitchen is the cutlery trays. These are devices for storing spoons, knives, forks and other small items. They are divided into several sections of the same or different sizes. The tray is put into the drawer of the kitchen set. It acts as an organizer for storing dishes and protects the bottom of the drawer from contact with dishes.
For the manufacture of trays, plastic, wood, stainless steel are most often used, but there are also more exotic options. For example, to store expensive cutlery, you can buy a luxurious tray trimmed with velvet. Such devices can hardly be called practical, because. they are unsuitable for daily use, but this is a wonderful decoration for the kitchen in classical style.
The cheapest models are plastic. They are durable, not afraid of moisture and high temperatures, easy to care for. However, any plastic products look unpresentable. This is a significant disadvantage. It is better to choose a more aesthetic model made of wood or metal.
Note! For the manufacture of trays, wood impregnated with special formulations. The material is resistant to moisture and acids, so you should not worry about its durability.
An analogue of the cutlery tray is an organizer shelf. This is a wall-mounted storage system in which the dishes are always within reach and additionally perform the function decorative element. As a rule, such shelves are used to store beautiful dishes of an unusual design. There are other types hinged structures for cutlery. The choice is extensive.
Hanging instrument tray
Option 3: mesh baskets
Retractable mesh baskets are most often installed under the sink, where there is an empty space that cannot be occupied by other storage systems. These are designs from metal wire mounted on full extension rails. To access the contents of such a basket, you do not have to make an effort. It is enough just to pull the structure towards you.
The space under the sink should not be empty
The device is made in the form of the letter "P", so that it does not touch plumbing equipment under the sink. Baskets located at the very bottom of the cabinet may be larger in size, because. they are located below the siphon. With the help of several designs of various dimensions, you can use every centimeter as rationally as possible. free space.
Option 4: carousels
One of the most good options filling for kitchen cabinets - rotary carousel. This is a system of metal semi-circular shelves that rotates around its own axis, providing access to the contents. This device is ideal for organizing inner space corner headset.
Most often, the shelves of the rotary carousel are made of metal with electroplated, less often from durable plastic. They are installed in a kitchen cabinet or attached to the facade. Both floor and wall modules are suitable for installation of systems.
Option 5: magic corner
This is a kind of analogue of a rotary carousel, but more convenient and roomy. The storage system is designed for use in corner cabinets. Items are placed in rectangular mesh boxes, which are connected swivel mechanism. The front of the baskets is attached to the cabinet door. When it is closed, the drawers are closed one by one.
magic corner
Magic corner baskets are able to withstand a large load (7-15 kg). They are completely protected from external influences, so you can safely store expensive dishes and household appliances in them. The mechanisms are designed so that the drawers extend in both directions - to the right and to the left.
Great alternative magic corner - corner cupboard SPACE CORNER by Blum with full extension drawers
Option 6: lifting mechanisms
Lifting mechanisms - useful gadgets to fill the kitchen set. Thanks to them, you can get rid of the inconvenience that creates hinged doors wall cabinets. Lifting mechanisms are designed to open the facades up and fix them in this position. This saves space.
Lifting mechanisms
There are several types of lifting mechanisms:
- Spring. The simplest and cheapest devices. They allow you to open the door, but leaving it in a half-open position will not work.
- Gas lift. A very convenient opening system, however, it has a significant drawback: due to the increased load, the mechanism wears out and quickly fails.
- Brackets. They are designed for smooth opening-closing, fixing the doors in any position. Today it is one of the most popular lifting systems.
- Electric lifting mechanisms. It's expensive, but if you can afford it, don't hesitate. Perfect option for arrangement smart kitchen. The mechanism is triggered by pressing the front.
Electric lifting mechanism E Verso
Option 7: retractable columns
Mesh retractable columns are designed for rational use spaces inside tall kitchen cabinets. One such design can accommodate several baskets. They are equipped with ball guides, thanks to which they slide out gently and smoothly, revealing the contents of the drawers.
No more digging into bottomless cabinets
Baskets withstand loads up to 20 kg. The total weight of their contents can be up to 150 kg. The systems are very reliable and durable. The latches are protected by several layers of a special coating, making them resistant to damage. The dimensions of the columns can be changed, because systems are fixed on telescopic frames.
Option 8: bottles
Another convenient filling system for kitchen cabinets is a bottle holder. It is a narrow bottle compartment and is suitable for installation in modules where there is not enough space for a wide drawer. Most often, bottles are located at the side walls of the stove. Here you can store oils, vinegar, narrow tall containers with spices, cereals, etc. Each item can be easily accessed.
The bottle holder is usually installed near hob
Advice. Some kitchen owners try to save money by buying inexpensive bottle holders. This desire is understandable, because a narrow system is almost as expensive as a wide one. The bad news is that savings can only be made by reducing the quality of materials. Cheap bottle holders wear out quickly.
Option 9: rail systems
Railing systems are metal wall structures for attaching kitchen utensils. Such filling for the kitchen is used for storing graters, ladles, skimmers, towels, etc. The simplest railing can significantly unload the drawers of lockers, and all items will be at arm's length, without interfering with the work of the hostess at all. If desired, the pipe can be easily moved to another location.
Rails can be horizontal and vertical. Systems of the first type are much more common. When positioned vertically, the railing pipe rests on the floor, ceiling or bottom of the wall cabinet. Look very nice vertical systems with shelves of different diameters. They enliven the interior of the kitchen, especially if the elements are made of copper, bronze or equipped with lighting.
Horizontal railing system in the kitchen
Complete set and arrangement of elements can be easily changed
Video: smart kitchen solutions from BLUM
Smart fittings and accessories for the kitchen:
SPACE TOWER - storage cabinet:
LEGRABOX drawers:
AMBIA LINE internal divider systems:
Filling systems for kitchen cabinets are not limited to the listed types of fixtures. For example, built-in trash cans have become popular in recent years. They are equipped with automatic opening and pull-out systems, very convenient to use and easy to maintain. If necessary, the containers are easy to replace. In addition to purely kitchen appliances, you can install other accessories - clothes dryers, ironing boards, etc. The possibilities are almost endless. Use them!
How to make even small kitchen would it be comfortable and fit everything, well, or almost everything, modern accessories, dishes and appliances, while not being cluttered yet? There is only one answer - you need to take a new approach to organizing the kitchen space. To do this, it is necessary to optimize what is already available and use the most remote corners and hard-to-reach places. Especially for this, furniture industry engineers have developed drawer systems for kitchen. Such mechanisms sometimes have very bizarre designs, but thanks to them, the kitchen not only becomes ergonomic and comfortable, but it is also much easier to keep order in it.
We will talk about such sliding mechanisms for the kitchen in this article.
Drawer systems for the kitchen
Pull-out systems for the kitchen - convenient and tricky ways to store
Ergonomic sliding storage systems will save you from clutter kitchen worktop, table, window sill and other surfaces. After all, they will significantly increase the spaciousness and convenience of the headset. It is now comfortable to place not only plates, spoons and ladles, but also sets of pots, stewpans and frying pans. And also many others kitchen items necessary for the modern hostess.
When each item is conveniently lying in a place exactly defined for it, there will definitely not be chaos and clutter in the kitchen. Thanks to this, you won’t have to look for the right item for a long time among a bunch of others. After all, sliding systems for the kitchen are designed in such a way that each of them is designed for a specific group of kitchen utensils. And this always allows you to know and be sure that the right one lies in a particular place. The presence of a convenient mechanism will also make it possible to quickly and effortlessly get what you need, which in turn will save time and effort.
Kitchen drawer systems
Drawers with modern mechanisms are convenient due to their ability to roll out of the bedside table completely, which makes even the most remote place near the back wall accessible, which is often empty in ordinary drawers. Items will now have nowhere to "fall" - they will be in plain sight and lie neatly!
Kitchen drawer systems
The new fittings that the drawers are equipped with are ball guides. In our country there are retractable mechanisms Blum, manufactures them German company. The ball guide has a complex mechanism, but thanks to it, the drawer leaves completely silently, and it is a pleasure to close it, because its motion is very smooth, and all thanks to special closers. Even if such a box is closed on a grand scale, the closers will not let it hit and it will close silently.
A kitchen drawer with such a mechanism is securely fixed, even with great effort it cannot be removed until you press the special buttons located under it. The possibility of the drawer slipping off the guide even after many years of operation is excluded.
Retractable mechanisms Bloom
Drawers for kitchens can also have an atypical shape, the reason is that designers, when developing a headset project, at the request of the customer often place them in a corner, and on two planes at once, which explains them unusual shape. Such original solution allows you to quite effectively use the corner of the kitchen.
corner drawers for kitchen photo
For small kitchen utensils, there is a special divider system that is inserted into the drawer or already built into it. Therefore, each of them now has its own clear place, this solution allows you to keep the internal contents of the drawers in order, and the entire kitchen as a whole.
Pull-out kitchen drawers
In addition to ordinary and corner drawers, there are also very original and one might even say “cunning drawer” designs. If you look at a closed cabinet with such drawers, it seems that there are one or two of them, but large ones. But when you open it, it turns out that there is one or two smaller ones inside. In such cases, the facade is attached to the largest drawer located below, and the rest are located above and have special handles instead of facades. It's quite interesting solution, which can become very convenient for storing sets of pots and pans. An alternative can also be cabinets with a hinged sash, opening it, instead of shelves, we find a whole block of drawers there.
Kitchen drawers
Kitchen cabinets with drawers
Custom vertical drawers
A vertical drawer is another convenient way to store kitchen utensils. It is installed on one side. cooker or ovens, on the other hand, they usually install another type of such a cargo box, but we'll talk about it a little lower. Such drawers are an ideal and convenient way to “hanging” storage of kitchen utensils: potholders, towels, frying pans, ladles, skimmers, etc. - everything in it can be stored on special hooks and rails.
Retractable systems for the kitchen photo
Retractable bottle holders for the kitchen
Retractable tabletops for kitchen
For example, a retractable worktop in the kitchen will increase work surface while cooking, it can also become a dining area - if the kitchen is very small and does not allow you to place a full dining table.
Retractable countertops for the kitchen
Pull-out table in the kitchen
retractable cutting board and pull-out trash can
A pull-out cutting board in the kitchen is another way to expand functionality without wasting space. Highly convenient solution, because there is enough space on it to cut both vegetables and meat.
Retractable cutting board in the kitchen
Retractable cutting board photo
The retractable board may have a hole in order to immediately throw out the cut "tails". And in order for the garbage to fall where it needs to, there are special built-in retractable bins for the kitchen, which are installed immediately under the board, while they can be pulled out separately - a very convenient and harmonious tandem.
Retractable trash can for the kitchen photo
Retractable trash can
Retractable trash cans for the kitchen photo
Other necessary and original retractable assistant mechanisms
The mechanisms described above are very common today and are already almost standard content for headsets. But there are also other built-in pull-out systems for the kitchen. They are not mandatory, but sometimes there is a need for them. For example, a retractable ironing board can turn the kitchen into a laundry room for a while, the solution is relevant for small apartments and more, if the kitchen is washing machine.
Retractable kitchen ironing board
Retractable slot with feeding bowls pet, built into the very bottom of one of the cabinets, will also help maintain order and cleanliness in the kitchen.
Retractable elements for the kitchen
Non-standard retractable wooden shelves for storing special kitchen accessories will also contribute to the organization of space, and can also become the highlight of the entire set.
Retractable elements for the kitchen
A glass wine cabinet with beautiful and neat drawers for bottles will look stylish and expensive in any kitchen.
Pull-out mechanisms for the kitchen
Making the kitchen comfortable and tidy today can be quite easy, for this you just need to think over the layout and apply the appropriate sliding systems for the kitchen. They are also a great tool that helps to significantly increase the functionality and ergonomics of a kitchen of any size.
Roller guides the simplest guides in terms of device and installation. The average price is 50-100 rubles. for a couple. Roller guides look like in the photo below, for sure you have seen them, and more than once.
Coated roller guides durable epoxy enamel, there are on sale guides of different colors, the most common guides are cream colors. You can find roller guides for drawers with a depth of 250 to 800 mm, that is, for almost all cases.
Roller guides withstand a dynamic load of up to 25 kg, you are unlikely to store something heavier in a chest of drawers or in a drawer in a closet. The disadvantages of roller guides are the noise with which they are extended and closed, the extension is partial. But the low price offsets these shortcomings.
According to the installation scheme, the gap between the outer part of the side wall of the box and the side of the product body should be 12.5 mm or 25 mm on two sides, usually 26 mm is taken in calculations. This means that the dimensions of the drawer in width should be 25-26 mm less than the internal space of the cabinet.
Ball guides
Ball guides, or even as they are called telescopic guides, are able to withstand heavy loads, have a smooth ride. The cost of guides is 300-400 rubles. for a couple. There are options with and without closers.
Ball guides, like roller guides, consist of two parts. One of them is attached to the box, the other to the side wall.
In order to separate them, you need to press the latch, as shown in the photo.
You can, of course, install without disconnecting, but this torment is something else, I had a chance to try it on my own experience. As a result, a negative idea can be formed about ball guides, about the complexity of their installation. In fact, everything is simple.
Installation of ball guides by elements it is made on the side walls of the cabinet and the sides of the drawer.
The most commonly used ball guides are 45 mm high, the size range of guides is from 250 to 700 mm, they can withstand loads up to 36 kg, which is more than.
Calculation of the box on ball guides similar to the calculation of roller guides, the dimensions of the box in width are defined as the size of the internal space minus 26 mm (12.7 mm + 12.7 mm).
Metaboxes
Metaboxes– pull-out system based on roller guides. The material of the metaboxes is 1.2 mm thick steel covered with high-strength enamel. Price 300-400 rubles. for a pair, produced by "Blum" in the region of 600-700 rubles.
Tandems
Hidden tandem slide technology ensures smooth running even for heavily loaded drawers. The drawer can be easily removed from the rails without tools.
Tandem- it is a smooth ride and full or partial extension. Drawers can be either with built-in closer or without. The tandem can be equipped with Tip-on (front push opening system). The cost of guides is 1000 -1500 rubles. for a couple.
On the drawer guides Tandem can make a box under the sink. Since the sink has a convex part, which is located inside the body, the standard, that is, the direct design of the drawer, is not suitable here. The convex part or the bottom of the sink will not allow the drawer to close. In this case, the bottom of the box is made with a cutout, the walls of the box made of chipboard are attached along the cutout. The whole structure is mounted on Tandem guides.
Application tandem rails involves the use of chipboard 16 mm thick, although solutions using chipboard 18 mm thick are possible.
The most expensive segment of the drawer guide market. The sides of the box (sides) are made of thin-walled steel, unlike tandems, where the body of the box is made of chipboard.
The kit includes fasteners to the facade and fasteners for the rear wall of the drawer. The detailing includes a bottom and back wall made of chipboard, like a metabox. Guides are similar to tandems, have soft closing, with closers.
Tandemboxes can be equipped with an opening system that does not require the installation of a handle on the front, it is quite easy to press the front with your hand.
Tandemboxes of various heights and variety of the range far exceeds metaboxes. Let's look at an example Blum tandem boxes.
Height N, drawer side height 68 mm, smallest drawer
 |
|---|
Height M, drawer side height 83 mm
Height C, drawer side height 115 mm
Is used for high facades, back wall increased, railing also added. The minimum height of the internal space for the drawer is 191 mm.
Height also D, drawer side height 83 mm
It is used for high facades, the back wall is also enlarged, but instead of two railings, the railing with Boxside is an overlay on the drawer side. The minimum height of the internal space for the drawer is 224 mm. The solution is mainly for kitchen drawers and not for wardrobes.
Two triple tubular holders and railing tubes make it possible to make a special drawer on tandembox rails into a sink cabinet. Thanks to the cutout in the bottom, the drawer allows you to bypass the sink protruding inside the cabinet body.
Another interesting solution from Blum is the use of tandembox guides for a corner pedestal called space corner.
The set of fittings includes a number of specific elements that are not found in other guides, and this fitting, frankly speaking, is not cheap. Space corner allows you to effectively use corner space in the kitchen, and the use of ORGA line dividers further structures the storage space.
at first boxes were positioned as elite products that were inaccessible to a mere mortal furniture maker. The point here was not at all the price, but the price, by the way, was the highest in comparison with other extension systems, but the complexity and accuracy of manufacturing the remaining parts from chipboard, the accuracy of milling the bottom of the box, the accuracy of drilling the side walls of the case and facades. Therefore, Legrabox boxes were offered to furniture companies that produce furniture high class.
Installation, calculation and installation of guides for boxes
It is not enough to know what drawer guides are, but the question arises, how to calculate and install guides.
The Internet provides a large number of methods and approaches in the calculation and installation of guides. I use a simple, user-friendly program from Blum called DYNALOG, for design we use the DYNAPLAN module.
The program allows calculate both roller guides and metaboxes, Tandemboxes and tandems. At the output, we will receive a list of parts with dimensions, necessary fittings, drilling drawings for the side wall and facades. Special furniture programs are expensive, it makes no sense to master them, and even more so to buy if you want to make products for the home yourself.
As an example of a basic product, I will give a cabinet 616 mm high, 600 mm wide, 500 mm deep with false facades 200 mm high, drawers made of Chipboard height 150 mm, gaps between facades 4 mm.
If we want to calculate installation of drawers in wardrobe, then please note that with a cabinet depth of 600 mm and internal partition 500 mm, we calculate for inset facades, the facades will be inside between the side wall and the partition, as well as between the horizontal walls. Side gaps are best done by 4 mm in the variant of inset facades.
The Duslar company is a wholesale and retail online store of fittings, accessories and furniture components. We are the official supplier unique solutions high class from leading foreign manufacturers.
Our company offers a wide range of built-in accessories for kitchen sets, cabinets and wardrobes.
Having been working for more than 15 years, we have become narrow-profile professionals, we are well versed in the development trends of the furniture industry market, we work with leading factories, private craftsmen, designers and retail customers all around Russia.
Trusting us, you can be sure that all products presented in the store are the best offer in terms of ergonomics, practicality and reliability.
Everything for the kitchen
You will find everything you need to make your kitchen comfortable, ergonomic and cozy.
Drawer systems for various kitchen cabinets, the task of which is to increase the efficiency and convenience of filling the kitchen several times. Thanks to these mechanisms, you can always quickly find the necessary dishes and easily get them from the farthest corners.
Stylish trays and dividers from durable food-grade plastic, or from natural wood - they will bring perfect order in drawers, neatly folding skimmers, ladles, forks, spoons, containers with spices, etc.
Anti-slip mats will keep for a long time original view drawers and shelves, protect against unwanted scratches and leakage of liquids. Each item will lie in its designated place.
Sorting systems and waste bins allow you to effectively use the kitchen space, while maintaining cleanliness and order. You will forever get rid of the problem of storing vegetables in the apartment, and easy-to-use trash cans will always be at hand, but hidden from view.
Rails for the kitchen perform not only a practical, but also a decorative function. They emphasize the style of the headset, give it individuality, help to competently organize working area kitchens.
Furniture lamps protect your eyes from stress while cooking, allowing you to create a cozy atmosphere in the kitchen.
Supports for tables and countertops- functionally and unusually decorate a bar counter or dining area giving the kitchen modern look and saving space.
Exclusive kitchen utensils will make work at home easy and enjoyable, so that you get only positive emotions from the cooking process.
Everything for cabinets and wardrobes
Filling and accessories for cabinets perfectly solve the problem of rational storage of things in the hallway, nursery, bedroom. In stock sliding shelves, baskets for clothes and linen, holders for shoes, belts, ties, pantographs, lamps and much more.
Why choose us
Wide range of products accessories and components for kitchen furniture allows us to offer a wide range of products for each segment of consumers. Each category includes both budget models and premium class products. The catalog contains many products of the most popular colors in various styles!
The professionalism of our specialists. Each of our employees is a real expert in their field, who is well versed in the segment of furniture fittings and accessories, constantly monitors market trends. Duslar partners call us a consistently reliable and professional supplier!
Convenient conditions and quality service. When ordering goods from us, you are guaranteed to receive them as soon as possible: all accessories from the catalog are in stock with a margin of several months. You don't have to waste time contacting transport company– we take care of all the arrangements and delivery of the cargo!
Previously, I have already described most of the systems for drawers separately. Now I decided to summarize this information in one article, so that it would be easier for you to make a choice in favor of a particular system.
So, today's furniture fittings market is quite wide selection systems for drawers, differing both in price and durability, convenience and many other characteristics. Let's start from simple to complex.
Roller guides. Represent metallic profile with plastic rollers attached to it. Attached to the assembled
I think that this system, despite its low price, is in the least demand today, due to a whole list of shortcomings, ranging from the fact that they are a partial extension system, and ending with the durability of the service.
Used in furniture of the cheapest class.
Ball guides also represented by several metal parts, in which smooth sliding is ensured by the use of balls. Attached to the assembled
Due to the absence of plastic, such guides are more durable. Full extension available. The balls provide a softer and quieter ride, and the low price - availability for buyers. Today it is the most common system.
Metaboxes sliding system based on roller guides, in which the metal profile is the finished side wall of the drawer. You only need to make the bottom, back wall and facade.
The main advantages of metaboxes are: a thick bottom made of chipboard, a larger drawer volume (at least 30 mm is gained due to thin walls), the ability to adjust the position of the facade. how additional option- metaboxes can be equipped with closers, as well as roof rails, allowing you to increase the height of the box.
The system has the same disadvantages that are inherent in roller guides, and therefore also not in great demand. Relatively cheap.
Tandems a rather complicated retractable system for fully assembled ones (by fixing the bottom "in the groove"). They are mounted under the drawer, which allows more complete use of the internal volume of the case and makes them invisible. They can have built-in closers and a push-to-open system (Tip-on).
The wide distribution of this system is limited to a price of at least 1500 per set.
Tandemboxes the most advanced system to date. As with metaboxes, to create a box you only need a bottom, a back wall and a front (not always). Tandemboxes are distinguished by high smoothness of movement, long-term operation, and can withstand significant loads. Thanks to the presence different kind fixtures, there is the possibility of zoning the space of the box, as well as increasing its height.
Produced in several versions, differing in design.
The system is equipped with many bells and whistles, ranging from closers and ending with an electric drive. The price of the kit starts from 2500 rubles.
Summing up, it can be said with certainty that the best option for budget projects there will be ball guides. If quality is at the forefront, then preference should be given to tandems or tandemboxes.
Roller systems can only be installed on the most economical options furniture.
Let's move on to the next component, without which it is simply impossible for any furniture maker to do.