How to glue wallpaper on the outer corner of the room. How to glue wallpaper in the corners: video. Overlap wallpapering

Planned or redecorating in the apartment is unlikely to do without this laborious process like decorating the walls with wallpaper. However, today non-woven wallpapers are often used for wall decoration, which have some advantages over their paper counterparts.

For example, such wallpaper options are allowed to be subjected to wet cleaning they do a great job of hiding imperfections. uneven walls and long time keep their attractive design. In addition, non-woven wallpaper is easy to fix on the wall, because it is a very easy-to-use finishing material that does not form vertical, horizontal folds and bubbles. Traditional external and internal corners that are difficult to finish can be decorated with non-woven material without experiencing serious difficulties. To do this, you just need to take into account some of the nuances.

The easiest way to get a beautiful front lawn
Of course, you have seen the perfect lawn in the movies, on the alley, and perhaps on the neighbor's lawn. Those who have ever tried to grow a green area in their area will no doubt say that this is a huge job. The lawn requires careful planting, care, fertilization, watering. However, only inexperienced gardeners think so, professionals have long known about the innovative tool - liquid turf AquaGrazz.

To finish the corners of the room with non-woven wallpaper, do not try to use a single piece of wallpaper in order to decorate both walls that meet in the corner. In this case, the wallpaper will "lead" almost with a guarantee, and the resulting folds will have to be cut, which will negatively affect the appearance of the wall. However, even if this can be avoided, the crooked angle (unfortunately, this is a standard practice for domestic builders) may affect the further design of the apartment with wallpaper. After all, non-woven wallpaper is applied to the walls "butt to joint", respectively, the skew allowed when passing the corner will force all other webs of material to be cut.

Finishing the corners of the room with non-woven wallpaper

The correct wallpapering in the corners with wallpaper made of non-woven cellulose material is as follows:

If everything was done without errors, then the joint between the strips of non-woven wallpaper will be difficult to notice, it will need to be processed with a roller or rags.

outside corner

Features of pasting wallpaper on external corners in the room

External corners in rooms are much less common than internal ones, but they do come across. The technology of applying non-woven wallpaper in this case is almost identical to the passage of internal corners.

At the first stage, we are engaged in geometric surveys:

We measure the distance - from the edge of the last pasted strip to the outer corner - and prepare the next strip of wallpaper so that, after fixing it on the wall, it “wraps” around the corner by no more than 50 millimeters.
We determine the point of the wrapped strip closest to the corner, it is from it that we will begin to glue a new strip of wallpaper.

Accordingly, measures are taken to apply a vertical strip and remove wallpaper residues.

By the way, if outer corner smooth, as evidenced not only visual inspection, but also checking with a plumb line, it is allowed to use one strip of wallpaper. However, it should be borne in mind that possible discrepancies should not exceed 5 millimeters.

paper wallpaper

Paper wallpapers are still popular with finishing work inside the apartment. This is due to their very affordable price and sticker method. It is worth noting that paper wallpapers are not able to hide serious defects in wall surfaces and curved corners. The method of fixing paper wallpaper on the walls is not too different from a similar technology with non-woven wallpaper.

The simplest option involves the sticker of this finishing material "overlap". In other words, the wallpaper panel is glued in the corner with a slight overlap (1-1.5 centimeters) on the adjoining wall, and the next strip is glued directly in the corner itself. This method is distinguished by efficiency, but the visual effect leaves much to be desired.

Paper wallpaper - application features

The second way to glue wallpaper in the corners is suitable even for slightly "littered" walls that form a corner. The initial stage is fully consistent with the previous method, the only difference is that the overlap on the adjacent surface is somewhat larger. The next strip of wallpaper is also glued “overlapped”, but its farthest side from the corner should be oriented along vertical stripe applied with a plumb line. The canvas should lie down with an overlap of 2 centimeters, while having a common border with the adjacent wall. Then, along the applied vertical lines, both layers of the finishing material are cut with a special knife, and after removing its remnants, you can proceed to further design apartment walls. Do not forget to process the cut line with a special roller.

As you can see, the method of gluing paper wallpaper in the corners is very similar to the method of fixing non-woven wallpaper.

Finishing the outer corners with paper wallpaper

External corners meet in the form window slopes, decorative partitions from drywall, etc. In any case, the geometry of such an angle is extremely important, because such an angle, unlike the internal one, is constantly in sight. So possible defects the outer corner should be eliminated in advance and only after that proceed with the wallpaper sticker.

Corner wallpapering technology

The technology of wallpapering on the outer corner is very similar to the second method of fixing wallpaper on the inner corner. However, the "overlap" on the adjacent wall should not exceed 5 centimeters, this is due to the fact that a large overlap with an uneven wall surface will be difficult to level. Depending on the quality of the wall and wallpaper, wrinkles may appear, they are eliminated with the help of special horizontal cuts on the canvas. The next strip of wallpaper is glued close to the corner, but its far edge must run along a pre-defined vertical strip. Next, using a paint spatula, building level or a metal ruler, we press the center of the overlap and cut off both canvases with a wallpaper knife. After the remnants of the wallpaper are removed, they need to be glued and treated with a roller. The docking joint in this case will be offset by a few millimeters from the corner itself, but this is how it should be. Otherwise, there is a risk of tearing the wallpaper as a result of careless movement.

Little tricks when working with wallpaper

Finishing material is of key importance when working with internal and external corners:

Paper wallpapers should not be pre-applied with glue, there is a very high chance that they will soak through it and tear in your hands. However, this type of wallpaper does not require trimming when passing corners, because due to the fact that the wallpaper is very thin, it is enough to iron the joints with a dry rag or roller.
Vinyl wallpapers, on the contrary, are best treated with glue in advance and let them absorb it. Vinyl wallpaper is quite dense material, and with advance prepared canvases will be easier to work with.
On non-woven wallpaper, you do not need to apply glue, it is applied only to the wall.
The general rule for all types of wallpaper is that they should be glued in rooms where there are no drafts, air conditioners and heaters do not work.

Do not forget that the walls must be treated with a primer before wallpapering. In addition, the adhesive must match the type of finishing material such as wallpaper. Firms specializing in the production various kinds wallpaper, indicate in the accompanying documents the most suitable adhesive mixtures for their products.

Necessary tools and materials

Tools and materials for wallpapering an apartment

In order for the design of the apartment to be wallpapered quickly and successfully, it is advisable to take care of the availability of the following tools and materials in advance:

dry rag or sponge to eliminate excess glue;
building hair dryer;
brush;
vacuum cleaner;
ladder or scaffolding.

Results

Wallpaper, despite all their shortcomings, as a type of finishing materials used for interior design apartments are one of the most popular, this is due not only to their price, but also to the fact that they can be pasted without the help of third-party specialists.

Today, wallpapering walls is perhaps the most popular method. decorative finishes, so many owners tend to cope with this process on their own. Of course, the easiest way to stick wallpaper.

If the corners are even, the wallpaper is simply bent, moving on to the next wall. However, it is not at all easy to meet a room with even corners now. the likelihood that you will think about how to glue wallpaper in the corners is even higher. What to do if there are problems with pasting corners?

Before starting work, you need to carefully inspect the corners. If there are irregularities, the walls can be leveled with putty, and after the putty has dried, clean the surface sandpaper. After that, it is recommended that the surface (as, by the way, the walls) be primed. However, not everyone can cope with the alignment of corners, so they are forced to glue the canvas on crooked corners. in this case?

Where to start?

As a rule, most will answer that you need to start gluing from the window. This is not entirely true. Such a widespread opinion appeared in the era that overlapped, and the “from the window” option made the joints of the strips less noticeable. Modern materials, for the most part, are glued end-to-end. In order for them to look beautiful, you need to carefully expose the first canvas, which should be strictly perpendicular to the floor.

Considering that you will not find even and ideal corners in our houses, the only right decision is to start gluing the material from the doors. Doors are set perpendicular to the floor.

AT last years gained wide popularity with a fine texture, which is an alternative to painting walls. Knowing how to stick wallpaper in the corners, you will reliably hide the bumps in the walls, and they will look like a single canvas. Such wall coverings you can start gluing from the corner, of course, if it is not too crooked. First of all, you need to be guided by considerations of convenience.

Work steps for internal corners

Conclusion

As you can see, sticking wallpaper on the corners is not so difficult. anyone will be able to cope with this work and decorate the room to their liking by doing everything with their own hands.

The use of roll materials for surface cladding is a popular and sought-after solution that allows you to achieve high-quality results in a short time. But the finishing technology has some nuances. It is especially difficult to glue wallpaper in the corners: the resulting coating must be free of distortions and defects. Most suitable way chosen depending on the situation.

Vinyl

The technology for working with this option is not very difficult if you perform all the processes correctly.

Step-by-step instruction:

The place is being prepared. For convenience, the material is rolled out on a clean floor or a table of a suitable size with a pattern down.
Trimming is carried out taking into account the allowance of 100 mm. If the coating has a complex pattern, then the scheme specified by the manufacturer is used.
The canvas is treated with glue and folded in half for better penetration.
The composition is applied to the wall with the capture of areas that extend beyond the width of the roll.
The strip is laid on the base and smoothed out well.
It is taken into account that standard and meter vinyl wallpapers on a non-woven base, you can only glue it end-to-end, the overlap will ruin the look.

The vinyl layer on the canvas is strong enough, so the wallpaper can be safely smoothed out with a wallpaper spatula without fear of damaging the integrity.

On a note! In the absence of experience and the need to adjust a complex pattern, it is better to prepare: for this, the stripes are placed on horizontal surface, are aligned with each other and the size of the necessary adjustment is noted.

Paper

Sticking this variety is rarely accompanied by difficulties. For the process, you can use any glue, including those prepared by yourself.

Action algorithm:

According to the width of the roll, marking is carried out using a level and a plumb line.
The material is dissolved into strips, depending on the pattern. For this, a technology similar to working with a vinyl version is used.
The canvases are well smeared with the prepared composition and rolled up.
After surface treatment, pasting is carried out. The excess is cut off.
Often paper products are overlapped, but strips can also be joined. It is taken into account that after drying the canvas will become narrower, therefore a special paper tape. This rule applies to other types of wallpaper as well.

It is impossible to tighten the web at the junction by force, the connection is leveled exclusively with a rubber roller

All processes, especially smoothing, are carried out with care, because even multi-layer products are very easily damaged.

non-woven

To glue this variety, a special version of glue is used, since the material is quite heavy. The preparation of the binder is carried out strictly according to the instructions and is applied only to the wall.

Process diagram:

It is important to properly impregnate the base: do not leave dry areas. Be sure to affect places that go beyond the width of the canvas.

Advice! To speed up the process, it is better to apply the composition with a roller.

In addition, we suggest watching a video where the process of gluing non-woven wallpaper is considered.

How to properly wallpaper corners

The technology of laying sheets on the outer and inner corners has differences.

External

These areas are the most visible, so they must be glued with special care. The easiest way is if the angle is perfectly even, but this is quite rare.

In the presence of defects, the process is complicated. If the corner is littered, then it will be necessary to trim the canvas along the bend line in order to impose one section on the adjacent one. This method is not suitable for varieties with complex patterns.

There is another way:

The strip is glued to a section of the wall.
Using a special spatula, the material is carefully smoothed under the existing bend, a transition is formed.
If required, part of the laid canvas is torn off, after which the excess is driven up or down. There must be a margin on both sides.
To adjust the pattern in case of skew, the next strip is overlapped until the pattern is aligned with an indent from the edge of 5–10 centimeters.
With the help of a ruler, which serves as an emphasis, the superimposed canvases are cut exactly according to the pattern.
If required, the joined sections are additionally coated with the composition.

Docking the outer corner with trimming on one of the adjacent planes is considered the most effective way arrangement

This method does not completely correct the skew, but facilitates further sticker and fitting.

Interior

The technology for working with such a site is almost identical to the previous process, but has some nuances:

All sides are well processed wallpaper glue. If the composition is also applied to the canvases, the impregnation must also be sufficiently thorough.
Laying begins with the wall from which the movement is carried out. The first fragment is aligned with the previous one, smoothing into a corner is carefully performed. For this rubber spatula Waves move in one direction.
The part that falls on the adjacent wall is slightly pressed.
The next steps depend on the situation. Most often, it is required to cut off the existing bends in the middle and put the excess on top of each other.
To achieve better alignment, the edges are shortened and smeared, after which the segment is located on the main part of the canvas.

Technically, joining an internal corner is not much different from similar work on external structures, but this process is considered easier, since internal corners are visually less noticeable.

This technology makes it possible to glue different types products, but if the corner does not involve cutting, laying is carried out in a standard way. To do this, the joint of both sides is carried out with a margin in order to level the unevenness by fitting and trimming at the place of alignment. This will take longer, but will get rid of the overlap in the corner.

Video tutorial: how to glue wallpaper with trimming in the corners

Docking wallpaper with a pattern

Work technology:

The strip is laid on the initial part of the wall and gradually distributed over the surface. Waves are driven towards the corner.
The material is carefully fixed on the inner fragment and smoothed from top to bottom. It is taken into account that the canvas should be cut off with a significant margin, since trimming of the lower and opposite edges will be required.
The part that falls on the perpendicular wall is distributed. The areas at the skirting boards are adjusted.
If the side is uneven, then it must be pasted over with the next strip, which lies completely in the vertical plane. The offset must affect the matching pattern.
A ruler is set exactly along the line, with the help of a clerical knife, the excess is cut off.
The second strip moves to the corner, the gap needs to be additionally glued.

If there are no problems, you can dock directly along the inner corner, but this will require a certain level of skill.

Wallpapers with a pattern are joined according to the same principles as without a pattern, but if a horizontal mark from masking tape, then it will be easier to combine the ornament

What to do if the joints are crooked

Perfectly even corners in rooms are rare, so to eliminate different problems you can use the recommendation that many designers use - a combination. It is necessary to seal the transition from wall to wall with wallpaper with a pattern or with bright colors. Part of the pattern should go to neighboring side, where it cuts at a right angle and blends with the same color material. The docking line will turn out to be even, and the existing shortcomings will not be evident.

To the type of interior present now high requirements. The owners of Khrushchev houses, who repeatedly glued paper tapestries in their apartments, now do not dare to start repairs with their own hands. They don't know how to stick wallpaper in the corners to make the room look up to par. It is more difficult to work with vinyl and non-woven fabrics. They are heavy and require certain skills. If you properly seal the corners with wallpaper, then the next repair will not be soon.

How to glue wallpaper in the corners?

Rough corners scare novice craftsmen, and even ones are a rarity.

It is difficult to bring two planes together perfectly. Therefore, even with flat walls, the corners have a lot of deviations. I had a lot of work and Vadik had to finish the aunts' apartments on his own. He did not dare to start, because he did not know how to properly glue the wallpaper in the corners.

Sticking wallpaper in the room

I decided in practice to show my friend how to wallpaper the rooms of old houses. One of my teams was renovating an apartment in a historic building. Vadik could see:

preparation;
alignment methods;
how to use perforated corners;
room decoration.

The technology for finishing corners with wallpaper of all types is the same. Only thin paper tapestries and fiberglass cobwebs can differ. Work must start from front door rooms when gluing end-to-end. When applying the edge of the strips of thin tapestries - from the window.

Preparation and leveling simplifies subsequent finishing

Correctly glue the wallpaper in the corners

Making repairs in old apartments, I always putty the walls and install perforated corners. They simultaneously serve as beacons and protect the ledges from destruction. I choose cardboard if the inner corners have slight irregularities. In all other cases, I use a PVC profile.

checking laser level wall verticality. You can use a plumb line. I choose a base more even surface.
I putty and drown the profile in the solution, setting it in level.
I smooth after drying with another layer of putty. Under paper and non-woven wallpaper, I use an additional finishing composition.

If customers do not want to spend money on leveling and corners, then I simply close up large depressions. I glue the corner with wallpaper, cut off a strip 10 - 12 cm wide. I place it evenly on both walls, make cuts for a snug fit. After that, it is easier to glue the wallpaper in the corners. If the upper canvas has to be cut or the paper tapestries burst, then thanks to the background of the same material, this will not be noticeable.

Self-glue wallpaper in the corners

Advice! It is better to align the corners well once than to fool your head every time you wallpaper a room.

We paste over the protrusions

The last strip in front of the corner is cut off with the expectation that it will go onto another wall by about 2 - 5 cm, depending on the curvature. How more swings, the wider the entry. It must completely cover the most convex place by at least 8 mm.

For a better fit, I make notches with a sharp knife or just cuts with scissors. It is desirable that they be inclined with respect to the edge. I close the corners with wallpaper and smooth out the main part first, then the strip around the corner.

How to glue wallpaper in the corners of the apartment?

Before starting to glue the wall from the corner, we measure the width of the trellis and draw a line vertically along the level. I check additionally the condition of the corner. Side surface the strip should run over the deepest dent. I stick strictly vertically, according to the markup. Near the corner, the edge lies flat. The protrusions are hidden under the wallpaper pasted before.

Wallpapers with large pattern it is better to cut so that the lines match. A small shift will be imperceptible.

Thick vinyl wallpaper I cut along the ruler at a distance of 2 mm from the edge of the top sheet. With a sharp knife I cut both pieces strictly vertically along the entire height. I remove the excess and the canvases lie end-to-end. For strength, I enclose a painting grid.

We glue wallpaper in the corners with our own hands

Advice! Use clear glue.

We start gluing from the door

My friend was able to see everything and now wallpapering in the corners did not frighten him. Before you start finishing the room, you should draw vertical lines and check the condition of the corners. If not professional level, you can use the load on the thread.

We stick with a call up to 5 cm on the adjacent wall.
We smooth the main canvas to the corner, glue it.
We make cuts and tightly fill all the bumps with wallpaper.
We mark the vertical and, taking into account the pattern, glue the next strip end-to-end to the corner.
We cut both canvases along the ruler at a distance of 1 - 2 cm.
We remove excess pieces of wallpaper.
Having unbent both edges, we glue the paint grid. Lubricate it with additional glue.
We connect the strips end-to-end along the cut line and press.

Before gluing the wallpaper in the corners, make an approximate marking of the location of the strips on all walls. If a piece of wallpaper ends close to the corner, then immediately shift the first strip. You can start with a strip cut off along.

Simple tricks to hide unevenness by combining

Exactly glue the wallpaper on the corners

I used to tell Vadik that in order to create original interior used in combination with different drawings and tones. After a tour of the old building, he suggested that the designers came up with such a technique to hide defects.

Before starting repairs, consider interior design options with companion wallpaper. First, paste over the walls with trellises with a pattern, going to the next wall. Then, with plain stripes, make out the transition. The cut lines will visually look like even corners. Irregularities will be invisible.

Glue wallpaper in the corners

For amateurs with no experience, combining is more accessible than wallpapering with a pattern. At the same time, you adjust the shape of the room and increase it.

Very often, in houses with relatively even walls, the corners have certain defects, therefore, before gluing the wallpaper in the corners, it is necessary to align them.

If this is neglected, then facing material lie unevenly, which will spoil appearance not just the walls, but the entire room.

Today, to create beautiful interior, apply Various types roll finishing material.

They differ from each other not only in color performance, but also in the material of manufacture.

Every year, non-woven and vinyl wallpapers are becoming more and more popular.

They are considered environmentally friendly, so they are often used in bedrooms and children's rooms.

And thanks to the excellent resistance high humidity and simple care, walls in kitchens and corridors are often pasted over with this material.

Substrate preparation for wallpapering

Non-woven and vinyl wallpapers, unlike paper ones, are quite expensive, so they are not glued for 1 year.

In order for the roll material to lie flat and not peel off over time, a number of preparatory measures should be carried out, which include the following steps:

dismantling of the old finish;
plastering;
puttying.

Before you start gluing exterior or interior wallpaper in the corners, you need to remove the old finish.

If this is not done, then after a while bubbles and wrinkles form under the new wallpaper.

And if thin paper wallpapers are used for gluing, then the pattern of the past lining may appear on them.

Dismantling of old wallpaper is carried out in the usual way. kitchen knife or spatula.

If during the work there are difficulties in peeling them off, then the finishing surface can be treated with heated water and wait 10-20 minutes until the material gets wet.

The next step is to level the walls and corners with plaster.

It is applied in layers.

The thickness of one layer should not exceed 6 mm.

At the same time, the number of such layers depends on the degree of unevenness of the walls.

At the last stage, puttying is carried out, with the help of which the finishing surface will acquire the required smoothness.

For this, 2 types of putty are used: starting and finishing.

The second one is more saturated white and less grainy.

After finishing layer putty dries, the walls must be cleaned with sanding paper to remove minor defects.

After sanding the walls, they are primed again.

At the same time, special attention should be paid to the corners, since these places are most exposed to moisture and microbes.

Gluing inside and outside corners

Non-woven wallpaper is "more obedient" than paper, so it is easier to work with them.

Before you glue the wallpaper in the corners, you should understand that for a normal roll material one type of glue is used, and for non-woven wallpaper - a completely different one.

Therefore, the choice of one or another adhesive composition will depend on the type of wallpaper used.

At the same time, with paper wallpaper, glue is applied both to the finishing surface and to the wallpaper itself, and with non-woven and vinyl - only to the wall.

The technology of gluing the outer corners is somewhat different from the finishing of the inner ones.

How to glue the inner corner?

So that after the wallpaper has dried in inside corners folds have not formed, gluing should be done not with one solid canvas, but with two: on each side of the canvas.

To do this correctly, you first need to measure the height of the wall, along which to set aside and cut off the required length of the canvas (wall height plus 20-30 mm for allowances).

Then, immediately before gluing, the wallpaper must be bent lengthwise into two parts: one part (main) will cover one plane of the corner, and the second (about 40 mm wide) will go to the adjacent side.

This should be done very carefully so as not to inadvertently damage the non-woven or paper wallpaper.

After that, using a roller or rag, the canvas is smoothed with smooth movements from top to bottom.

In this case, you need to carefully watch so that air bubbles do not form under the wallpaper.

The next step is pasting the second side of the corner.

This is done with a slight overlap (about 25 mm), on a previously glued canvas.

Then, according to the mark, with the help of a clerical knife, 2 layers of wallpaper are cut simultaneously, after which the excess parts are removed.

If this procedure is done correctly, then you will definitely like the result of the work.

How to glue the outer corner?

If the outer corner is sufficiently even, then you just need to wrap the canvas and continue finishing.

If you have a curved protrusion, then wallpapering is overlapped.

To do this, the canvas is first glued to one side of the corner, with a small margin (25 mm), which will go to the second plane.

If the wrapped edge lies with folds, then it can be cut in 3-4 places.

After that, as in the previous case, the stock is cut along a plumb line, as close as possible to the ledge.

As a result, you will get only a slight overlap, which will practically not be visible.

Sticking wallpaper in the corners is a rather complicated procedure that requires patience and accuracy.

However, if you approach the work with full responsibility, taking into account all the rules and wishes, you can be sure that the result will be no worse than if a specialized team glued paper or non-woven wallpaper.

Categories

Popular