How to remove tape marks from plastic. Does the tape leave a sticky residue behind? Choosing the right cleaning method

Adhesive tape is without a doubt an excellent fixing and packaging material. However, after gluing, in most cases it leaves sticky marks on the surface. And sometimes it is extremely difficult to wash them. But there are several available and enough simple methods solutions to this problem. Let's try to figure out how to remove traces of adhesive tape from different kind surfaces.

It is worth noting that any adhesive tape uses acrylic-based glue as an adhesive layer. Therefore, the means for cleaning it are selected accordingly. It is only necessary to take into account the type of surface to which this adhesive tape is attached. After all, keeping it intact is also very important.

How to remove duct tape from plastic

Plastic is probably the most common material in our homes. Furniture, dishes, household items, toys for children, etc. are made from it. Before trying to clean traces of adhesive tape from plastic elements, it is necessary to evaluate the quality of the plastic. For good plastic more aggressive means will do.

So to remove old tape, leaving traces, you will need:

gasoline or white spirit;
pencil eraser;
vegetable oil;
hair dryer.

So let's start with vegetable oil. It allows you to easily remove traces of adhesive tape. After all, after mixing with its glue, the oil can change its properties. Oil must be poured directly onto the surface. If it's vertical. Then you need to soak a rag with it and attach it to the surface for a couple of hours. After the loss of stickiness, the mass is simply erased with a napkin. The plastic is then washed with soap and water. This method cannot be used if subsequently it will not be possible to qualitatively wash the object from oil.

A regular eraser also makes it possible to remove traces of adhesive tape from furniture, glass and other objects. Moreover, he is able to cope with even the oldest traces. All dirt can be removed according to the principle of pencil marks on a sheet of paper. After that, you should only blow off or sweep away the mote. The "minus" of this method can be called a large laboriousness. After all, if it becomes necessary to clean a significant area pasted over with a film, then this will take a lot of time and effort.

Refined gasoline, intended for refueling conventional lighters, or white spirit can quickly and effectively wash the effects of sticking adhesive tape from any plastic object. The surface is wiped with cotton wool or a small cloth moistened with the indicated solutions. Next, the item must be washed with any detergent.

The "minus" of this method is the aggressiveness of the means used. As a result, along with the remnants of adhesive tape, it is quite possible to remove and upper layer plastic. As a result, the subject may fade or appear more light spots. Therefore, before cleaning, it is better to try the product on the hidden part of the plastic object. And, of course, such cleaning methods are not suitable for toys.

As you know, adhesive tape, which long time stayed on the surface, eats into it. As a result, the plastic object and the adhesive tape become one. This is especially true for films that are pasted over the frames of plastic windows, as well as informational stickers on glass. In the case of windows under the influence of the sun and the vicissitudes of the weather, the adhesive tape is almost impossible to clean. In this situation, a regular hair dryer can help.

Under the influence of heat, the adhesive can soften, as a result of which it will succumb to the influence of various cleaning agents. A hair dryer will also help when removing a peculiar double sided tape. After all, the latter, in addition to glue, also contains foam materials and rubber, which are able to adhere tightly to the surface. The "minus" of the described technique is that not every type of plastic can survive heating with a hair dryer without losing its aesthetic appeal. Also, a hair dryer is not always available.

How to remove duct tape from furniture

Scotch tape on furniture most often turns out to be in case of its transportation. After all, it is so convenient for him to fix the doors of cabinets and other moving elements. To clean the furniture use the same list of products. However, before removing traces of adhesive tape, you need to familiarize yourself with some restrictions:

oil can only be used on polished surfaces. Untreated wood absorbs it. As a result, spots of fat remain on its surface;
gasoline, as well as white spirit, allow you to effectively clean any furniture. True, they must be used with caution on polished and painted surfaces. After all, they are able to dissolve such coatings;
With the help of an eraser, you can remove traces of glue from any furniture, including glassware. But again, the area of pollution acts as a limitation;
a hair dryer can be used as a preliminary cleaning agent with white spirit or oil. Care must be taken with glass and plastic products, as well as varnish, which may leave white spots.

Cleaning household appliances

To clean refrigerators washing machines and other equipment to the existing list, you can add:

vinegar;
alcohol;
acetone;
window cleaner composition.

These substances are quite suitable in order to wash unpleasant marks from glass, mirrors, tiles, ceramics, etc.

Acetone, on the basis of which, by the way, nail polish remover is made, can easily cope with the traces left by adhesive tape. If, apart from adhesive base there are also pieces of the film itself on the surface, then they must be moistened with acetone for a while, and then washed all together. This tool should not be used on tinted car windows.

Vinegar, as well as alcohol or window cleaner, can wash away not only the acrylic adhesive, but also the remaining tape. The disadvantage is the difficulty in washing off old stains.

It is worth noting that the process of dealing with stains after adhesive tape can be mechanized. So you can insert into a drill rubber nozzle or a nipple designed for tubeless tires. This method will allow you to simply remove traces of even double-sided tape. At the same time, the speed of work increases significantly.

Adhesive tape or simply adhesive tape has become an indispensable thing for many, and for a long time. But when gluing everything and everything with it, we often do not think about how then, and how to wipe off the glue from the adhesive tape, frozen to death on the surface. In the production of this adhesive tape, only one adhesive is used - based on acrylic. Therefore, despite the manufacturer, the component is the same everywhere. Now that we know what kind of glue it is, how to clean it from it varies only on the type of surface: plastic, wood, glass, etc.

How to clean tape from plastic?

Plastic is now perhaps the most common material in everyday life. Starting from children's toys and ending with dishes and even furniture. Of course, the adhesive on the tape sticks to it perfectly. It looks, let's say, unsympathetic, and picking up a thing that is replete with sticky spots that stick unpleasantly to your fingers is also not very comfortable. How to remove adhesive tape from plastic? — FAQ in such cases.

Before you decide how to wash the glue from the adhesive tape from the plastic, you need to understand what the quality of the material itself is. There is plastic that will hold up nuclear explosion, and there is one that is scary to rub with a washcloth. Of course, these are all exaggerations, but the essence is clear. The second factor that plays important role— how old are these sticky traces.

So, all the means suitable for this purpose are folk, empirically tested. Therefore, simply choose a more gentle or more rough and effective, depending on the type of your plastic surface.

Funds:

Rubber band for erasing a pencil (eraser);
Lean oil;
Hair dryer;
Ordinary solvent (white spirit or acetone);
Petrol;
glass cleaner;
Scotch;
your finger.

Ways

One of the simplest methods is to mechanically scratch the acrylic adhesive with your own finger, or rather, a fingernail.

How to remove traces of adhesive tape with adhesive tape - we remove like from like from the category. That is, in the place where the sticky traces remained, stick a new adhesive tape, press it down well and pull it with a sharp movement. For women doing waxing at home, such movements are familiar. Let's move on to more complex and previously unknown options for removing “stickiness” from plastic and PVC.

Vegetable oil

Surprisingly, but acrylic composition dissolves when exposed to fat. Anyone. Animal fat we do not recommend it only for those reasons that its use is more problematic - you first need to melt it.

How to use such a tool to wipe the adhesive from the adhesive tape from the plastic:

Pour the oil directly onto the stain and wait a few hours.
If you don’t want to so radically - on a rag and, again, on a stain, as you understand - for several hours.

The substance completely loses its sticky properties and can be easily wiped off with a dry cloth. Then wash the plastic after the procedure with something detergent to remove fat.

Important! The method is not suitable for places where it is difficult to rinse off fat later.

Eraser

How to clean tape marks with an eraser on hand is quite simple. The method is safe for all types of plastic.

You need:

Just rub the adhesive tape marks until they peel off.
After working with an elastic band, you just need to wipe the surface with a damp soft cloth, and you're done.

This method is suitable even for very, very old pollution. “Zatirachka”, as schoolchildren often say about an eraser, is truly a magical item that removes even perennial stains from adhesive tape.

Important! Look for another option to remove the acrylic adhesive if you have a large affected area. Otherwise, then you will have to walk with “krepatura” in the muscles of your overworked hands, that is, you will apply a lot of strength. And also time and patience.

Solvents

Just an ideal way to wash adhesive tape from plastic is to wipe it with a solvent, because acrylic lends itself easily to these substances:

Moisten a cotton pad or a piece of cotton wool with any solvent available in the house, whether it is white spirit, acetone or gasoline (best of all, the one for refilling lighters).
Wipe sticky deposits from the surface.
Then just rinse the plastic with detergent.

Important! Painted plastic runs the risk of being without a top coat of paint after such exposure. That is, lightened spots will remain on the surface. In order to understand how this method is suitable in your case, first apply the product on some piece of material hidden from the eyes, and then, if the paint does not rub off, erase the sticky marks.

hair dryer

Old plaque after adhesive tape will help remove hot air; at home, this is a hair dryer. From the effect of such a temperature, the dried substance will dissolve and it can be removed with other cleansing agents. Plus - hot air is simply necessary to remove traces after double sided tape, because this adhesive contains not only acrylic, but also foam with rubber.

Important! Again, test your plastic for durability in some inconspicuous place, and only then use (or do not use) this option.

Glass cleaner

This option is suitable for removing sticky mass not only from glass, but also from plastic. Works with newly formed traces - do not apply to old ones.

Your actions:

Spray on the tape stain.
Wait a few minutes.
After - wipe with a dry cloth or napkin.

Removing sticky marks from furniture

People transport furniture, fixing the opening parts of products with adhesive tape, without thinking about the consequences. Then, after arranging the interior items in the house, their thoughts are occupied by the question of how to remove traces of adhesive tape from the furniture so as not to harm it. appearance. Let's talk about several options.

Method 1

The same vegetable fat. Work in the same way as described above in the plastic section.

Important! Do not use oil on bare wood. Grease will be absorbed and leave ugly stains. Therefore, apply your previously known useful qualities solvents. Alcohol is also suitable: ammonia or ordinary, but work quickly.

Method 2

“Stickiness” of a small diameter will be removed, again, by an eraser.

Method 3

Treat large volumes with hot air (hair dryer). Then wipe off the tape marks with solvent.

Important! Furniture that has been varnished will have to be varnished again. From exposure to high temperatures, the varnish swells and loses its gloss.

Household appliances, glass and other surfaces

How to clean traces of adhesive tape, for example, from a refrigerator or stove? by the most the best option, of course, will ask the packers of the technician to remove all stickers right on the spot when you buy the unit.

Important! Remove them in stores with a special tool - aerosol WD-40. This is a universal composition designed specifically for such purposes. By the way, you can also buy it and use it at home. On the package it says: "To remove the labels." You can also use it to clean off traces of tape.

From folk remedies vinegar, acetone, alcohol and glass cleaner will help you cope with the task. Solvents and alcohols act in the same way as in the methods applicable to plastic, and with vinegar and glass cleaner - first soak, then wipe with a dry cloth.

With the same compositions, wash adhesive tape from such coatings as tile, ceramics, mirrors.

Glass cleaning

Glass - durable material, which is not afraid of any substances, so you should not particularly wonder how to wipe the glue from the adhesive tape. All previously described methods are suitable here. Let's pay a little more attention to the traces after the double-sided adhesive tape, namely to some nuances.

Scotch tape is a very convenient and useful thing at home and at work, but after it has served its purpose, you can encounter certain troubles - glue residues on the surface. How to wipe off adhesive tape if sticky marks remain on the surface after using it? What means to use to wipe old glue stains? How to remove marks from labels on clothes?

What is tape?

Is it cellophane or paper tape with adhesive layer. It can be both strong-setting and weak-fixing, applied on one or two sides. Many problems associated with the removal of adhesive tape from surfaces, we will help you solve useful advice in this article.

How to remove tape marks?

Select and suitable remedy cleaning.

You may need both improvised and special substances. Here is an example of possible options:

Vegetable oil;
Mayonnaise;
Ammonia;
Alcohol (vodka);
Essential oils;
Detergents (soap, powdered detergent, abrasive cleaning pastes);
Soda;
Nail polish remover;
Glass cleaners;
Solvents (purified gasoline or white spirit);
Means for cleaning furniture;
Scotch;
Blade;
Eraser;
Microfiber cloth.

How do you get tape off furniture?

Method 1

For polished and painted furniture surfaces, use oil-based products. To wash off the adhesive from such a tape, you can use any vegetable oil or mayonnaise:

Apply the substance to a cotton (gauze) swab.
Leave for a few minutes to let it soak into the glue.
Wipe the adhesive area with a sponge or cloth.
Wash off with warm soapy water.

Important! This method is universal - it can be used on any hard surfaces without compromising the attractiveness.

Method 2

Without special efforts the effects of adhesive tape are removed with essential oils. The product leaves no residue and quickly disappears, leaving a pleasant smell in the room:

Dampen the duct tape with essential oil.
Wipe clean with a paper towel.

Important! This option will helpget rid of glue from adhesive tape and on plastic windows or furniture.

Method 3

Use chemical substances for cleaning on furniture made of untreated wood, as the oil will have no effect or leave fat trail. When choosing how to remove the adhesive from the mounting tape from the surface, take into service substances such as White spirit, gasoline or nail polish remover. You need to use them like this:

Soak a sponge (rag) in the solvent.
Apply the substance to the surface.
Wipe the adhesive off the tape thoroughly.
Wipe with a damp cloth.

Method 4

A simple school eraser remains a universal, but very time-consuming option for wiping adhesive tape from furniture:

Wipe away any remaining adhesive with an eraser.
Wash off the marks from the eraser with a wet cloth.

Method 5

For stubborn stains, use a hair dryer or building hair dryer as the hot air melts the adhesive. If you choose this option, follow the instructions below:

Gently heat the stain with a hair dryer.
Soak a rag in vegetable oil.
Wipe off the glue.
Wash the cleaned surface with soapy water.
Wipe with a clean damp sponge.

Important! This method is suitable for different surfaces, but use it carefullyplastic windows or furniture.If the material is not heat resistant, it may melt or leave yellow spots.

How to clean plastic from adhesive residue?

Before deciding how to remove adhesive from adhesive tape from plastic, evaluate how quality material. Not every type will withstand abrasives, chemicals and heat treatment. Take into account the degree of old stains, as they are much more difficult and longer to wipe off the surface.

Method 1

Apply the adhesive tape itself to eliminate it on a small area of \u200b\u200bthe surface. Use this technology if the adhesive residue is fresh, thus:

Stick a new piece of duct tape over the old footprint.
Hold the tape securely in your hand.
Tear off sharply.
Repeat if necessary.

Method 2

When cleaning plastic from adhesive tape, use ordinary medical alcohol or alcohol-containing substances (vodka, perfume, cologne):

Soak a sponge in the product.
Wipe the surface.

Important! Before use, test the alcohol solution on an inconspicuous area, as different typesplasticreact differently to alcohol.

Method 3

Cleaning powders and pastes will come to your aid:

Slightly dampen the sponge with water.
Apply powder on it.
Gently and circularly rub the sticky area.
Wash off with water.

Important! Atcleaning adhesive tapedo not use abrasive products, you can leave scratches on the plastic.

How to wipe traces of adhesive tape from glass and mirrors?

Glasses or mirrors in the house can also retain traces of adhesive tape. Many people like to fix various memos in the most visible place - on the mirror using such a double-sided tape, and for the winter, owners of even high-quality plastic windows often paste over the entire perimeter paper tape. Therefore, this problem is quite relevant. You can also deal with it in several ways.

Method 1

The solution to your cleaning problem glass surface or mirrors, Mr. Muscle and Mr. Proper window products, which are sold at any hardware store, will help you:

Spray a little on the sticky residue of the tape.
After a while, wipe the glass surface with a sponge.
Rinse with water or dry with a special glass cloth.
If the adhesive is not completely removed, repeat the action with the rough side of the sponge.

Method 2

This option is quite laborious and will take time, but still, in the absence of other means, it will fit to remove traces of glue from adhesive tape:

Take the blade and gently clean up the sticky marks.
Carefully remove the spools with paper.
Wipe the area with a damp cloth.

Method 3

Works effectively on adhesive residue from adhesive tape ammonia or solvent 646. The procedure for using these products is very simple, but protection from a fetid odor is required:

Wear protective gloves.
Soak a cotton pad in the solvent.
Wipe off the dirt.
Wash off with water.

How to wash tape from clothes?

It may surprise someone that you need to remove adhesive from duct tape from clothes, but this problem is also not uncommon.

Method 1

A fresh stain from adhesive tape on clothes can be washed off in hot water if the fabric composition allows high temperature:

Soak the contaminated area.
Lather with laundry soap.
Leave for a while.
Wash normally.

Method 2

In some cases, it is easy and quick to remove glue stains with chemical solvents - just wet the stained area and rub it a little. To avoid unpleasant consequences, be sure to first test the product on a small piece of cloth.

Method 3

If traces of adhesive tape remain on your clothes, we recommend that you use the special “Label Remover” UHU Etikettenloser 48910.

If the question is being solved, how to wash the glue from the adhesive tape from the plastic, both the helpers and store funds. Cleaning methods can be more or less aggressive, and the choice should be made according to the age/complexity of the contamination. A feature of plastic surfaces is high adhesion with different substances. This complicates the cleaning process, but if you act consistently, using different types of products designed for such material, you can get the desired result.

Wipe off double sided tape

In case of plastic products, you need to act carefully, because this material does not always tolerate the effects of aggressive substances well. Double-sided tape can be removed by heating. Use a hair dryer or iron. The second option suggests the need to use a substrate, because in direct contact with a hot surface, part of the adhesive will transfer to the sole of the iron, and the plastic may be damaged. Sequencing:

The area to be cleaned is heated by any convenient way within minutes.
Use a blunt knife or spatula to scrape off the adhesive.
If the adhesive strips do not rub off well, you need to decide how to remove them. Consider different variants: vegetable oil, toothpaste, white spirit, acetone, thinner, gasoline, alcohol. Any of these substances helps to soften the adhesive composition. The selected agent is applied to a napkin and the remnants of contaminants are removed.

7 ideas on how to wipe tape off plastic

Spots may remain on the surface different nature. This happens in the case when the means were used without taking into account the fact of their detrimental effect on the material. Since it is not always easy to remove traces of adhesive tape on plastic, it is necessary to consider the following methods:

Baking soda. It is taken in random quantities. Add some water. It is necessary to obtain a mixture of creamy consistency. The composition is applied to the contaminated area with a rag. Using this method, it will be possible to clean traces of adhesive and adhesive tape on plastic. If, after completing the procedure, contamination is still visible in some places, repeat the steps. When the work is completed, the soda is cleaned from the surface with a damp cloth. Then you need to wipe the plastic dry.
Vegetable oil and soap solution. If you need to know how to remove traces of adhesive tape, it is recommended to apply a little oil to the contaminated area. This is done with a napkin. The agent is left for several hours. It will soften and then remove the adhesive from the label from the plastic. The greasy film is removed from the surface with a soapy solution. It can be prepared using washing powder, any soap or dishwashing liquid.
Stationery eraser or drill bit with similar properties. The first of these methods is less effective, it will not be possible to clean large area. A drill with a nozzle allows you to remove the adhesive from the sticker from the plastic and masking tape. The principle of operation of the eraser is similar to removing traces of a pencil on paper. In addition, the fresh adhesive is difficult to rub off, because in this case, the substance partially lingers on the eraser. This means that it is better to remove the remnants of adhesive tape from those areas that have been contaminated for a long time.
A method that operates on the principle of "knock out a wedge with a wedge": they impose adhesive tape over the old strip, lightly pressed, then sharply removed. If everything is done correctly, you won’t have to think about how to wipe off traces of adhesive tape. Dirt will be removed along with a strip of adhesive tape. This method is not suitable for cases where it is necessary to wipe the dried glue from the adhesive tape. At the same time, it is likely that most of the pollution will remain.
When choosing a method of how to wash off the remnants of the sticky layer, aggressive agents are also considered, for example, ethyl, ammonia. Substances are applied with care, because they can damage the structure of the plastic. It should be checked how the material will withstand the effects of alcohol. This test is done on a hidden area. If a plastic window sill has been dyed, this method cannot be used as the alcohol will remove the layer paintwork material. The agent is applied to the object, you can rub the contaminated area a little. After getting rid of traces of adhesive tape, the surface is wiped with a damp cloth.
Solvent and gasoline. These substances are applied pointwise, using cotton swab. This measure avoids deformation of the material structure. For the same reason, it is impossible to fill the entire surface and soak tape in aggressive agents. You can use refined gasoline, which is used to refuel lighters. This substance is less aggressive. In addition, refined gasoline does not leave streaks and traces, it evaporates quickly. If the stain is rubbed off, the plastic product can be cleaned with a damp cloth.
Soap solution. This method is suitable for small items(children's plastic toys) as they can be soaked in liquid. The solution is prepared from laundry soap. Water is added in an arbitrary amount. The soap should soften, so hot liquid is added. And to remove the tape, use warm solution. If you need to remove traces of glue from the windowsill, you can apply more soap suds and leave to soak. After a while, the liquid is washed off along with the dirt using a sponge.

3 ways to remove traces of glue from a plastic window

If you need to tear off old dirt left after removing the adhesive tape, consider the following methods:

Sponge with cleaning surface or metal, scraper with blunt cutting edge or other object with which it is easy to clean off the remnants of dried glue. Any of these items will remove dirt from plastic windows, but there is a good chance that scratches will appear. To prevent the surface from deforming, you can wipe off the remnants of glue or old adhesive tape using some of the means considered: vegetable oil or soapy water. With these substances, it will be easier to wash the plastic with a hard sponge.
Traces of adhesive tape lend themselves well to toothpaste. It is applied to the contaminated area in an arbitrary amount and left for 10-15 minutes. The paste penetrates the structure of the adhesive composition, breaks it, which facilitates the process of removing contaminants. After a while, wipe off the adhesive with a dry cloth, then clean the surface with a damp cloth.
Steam generator. If the question is solved, how to wash the adhesive tape with plastic window, it is recommended to consider the method of thermal exposure. In high-temperature mode, it is much easier to clean objects from contaminants, which are based on - old spots adhesive. The steam generator is directed to the area where the adhesive tape was recently located, under the influence of a jet of hot air, the adhesive will soften and it will be easier to remove it using dry or wet wipe. At this stage, any of the above means will also work, which will help facilitate the cleaning process.

In an effort to remove the adhesive from the plastic, you need to remember that you can not use abrasive powders and compounds containing acids. Both methods can cause surface deformation.

https://www.youtube.com/watch?v=jVs_Lvrq6Cc Video can’t be loaded: How to clean windows from adhesive tape and wash plastic from glue (https://www.youtube.com/watch?v=jVs_Lvrq6Cc)

Special chemicals

The cleaning agent can be purchased at the store. Among the available and effective are:

Bingo, Palmyra. The last of these is characterized by a weak abrasive action. For this reason, it should be used if you need to remove tape from inconspicuous areas. With short-term exposure to slightly abrasive compounds, the product is not deformed.
Cilit, Mr. Muscle - special formulations for cleaning glass and other surfaces. First, they check how they remove traces of adhesive tape from plastic, for which the agent is applied to small plot where the defect will not be visible in case of failure. If the procedure provided good result, handle a larger area. You need to apply the drug and leave for a few minutes. Then it is washed off with a damp sponge.

There is a line of products designed to remove adhesive tape and adhesive residue that lingers on plastic after a failed cleaning procedure. The most common options are:

Aerosol Scotch remover. The composition is treated with the desired area and after a while the adhesive tape is removed. Special composition acts moderately aggressive, so before use, you should read the instructions to understand what surfaces it is intended for.
Mellerud works well with all types of adhesive tape.
Liquid composition AntiScotch (ChemBox). It is offered in bulk containers, for this reason it is often used in facilities that have recently been built. In this case, all windows have to be cleaned of adhesive tape. The cost will depend on the volume of containers (1-1000 liters).

Given that most of these compounds are characterized by an aggressive action, rubber gloves should be worn.
The substance is applied to the surface of the object to be cleaned, or the sponge is first treated. Then move on to cleaning. It is recommended to process strictly the area that is contaminated with glue / adhesive tape.
Rinse the sponge periodically to remove adhesive particles. If this is not done, the abrasive layer will be covered with glue and stop cleaning the surface.
At the last stage, the washed particles of the adhesive composition are removed, the plastic is wiped with a damp cloth.

After using special preparations containing aggressive chemicals, it is recommended to open the window and ventilate the room. This need is due to the fact that volatile compounds are released into the air, a high concentration of which can adversely affect human health. After the procedure for removing the adhesive tape, you need to inspect the surface.

Sometimes the shade of plastic changes on the cleaned area. The reason for this lies in the fact that the material is already old, has lost its color, and exposure to aggressive agents has led to bleaching. In such cases, it is recommended to return light shade the entire surface of the object.

Scotch tape has been successfully used in everyday life for a wide variety of needs for a very long time. It perfectly fastens, helps to quickly pack a thing, and also insulates windows. In addition, adhesive tape can be single-sided and double-sided, which expands the scope of its application. But many housewives are constantly faced with the traces that remain after this effective fixing material. Often, instead of washing the surface, some just waste time and money. Or generally spoil the things to which it was glued duct tape. And all because they do not know what exactly can remove stains without damaging the material.

Why do tape marks remain?

The only drawback of this fastening material is the traces that remain on the surface from its use. Why do they appear? The fact is that the basis of adhesive tape is glue, with the help of which, in fact, it is kept on the surface. The appearance of spots depends on two reasons:

from the material to which the adhesive tape is glued;
from time.

It is important to understand that the softer the surface, the more difficult it will be to get rid of traces later. Glue in such material is absorbed very quickly. If you stick adhesive tape to cardboard, for example, then after removing it, the marks on the surface will be very significant. And on plastic or wood, only a barely noticeable trace of glue will remain. A lot of glue remains if the tape is stuck for quite a long time.

How to remove tape marks from furniture

Often furniture is pasted over with adhesive tape during transportation. It is very comfortable. But after the furniture is delivered, the owner faces the task of cleaning it from sticky marks. You can use several methods for this:

Best for polished furniture essential oil, which is not suitable for raw wood. The trace from the adhesive tape should be moistened with any oil and left for a few minutes to get it wet. Then everything is cleaned with a paper towel.
For regular suitable for furniture white spirit solvent, which is likely to leave stains on a polished surface;
Unpolished furniture can be preheated with a hair dryer to make it easier to remove the tape marks later.
If the traces of adhesive tape occupy a small area, you should use a regular eraser. This procedure is very simple - just rub the stain from the adhesive tape until it disappears. After that, it remains only to wipe the place with a damp cloth. The disadvantage of this method is only in duration. Therefore, the eraser will not be able to quickly erase the glue.

Often there is a problem with sticky traces of adhesive tape remaining on the upholstery of a sofa or chair. You can remove them in several ways. First of all, you should try to wipe it off with soap solution. If this does not help, then you should take alcohol. In order not to spoil the fabric, it is better to try this method on a small area of the upholstery. Next, you can apply the most effective means- solvent or alcohol. But again, before using it, you need to test the fabric for strength.

How to remove tape marks from glass and plastic

In order to get rid of traces after using adhesive tape from glass, just wipe it conventional means for washing windows. This tool can be used not only for window glass but also for furniture mirrors. If there are too many stains, you can use acetone or alcohol. The only thing is that they cannot wash tinted car windows. And when using such liquids, it is better to wear gloves, otherwise you can seriously damage the skin of your hands.

Recent marks can also be easily wiped out with regular baking soda. To do this, pour a teaspoon of soda hot water. The result should be gruel. It is applied to a sponge or piece of cloth and rubbed on the glass. In the case when the glue is very old, can be purchased at the stationery store special remedy to remove adhesive from glass. If there is nothing but gasoline at hand, then the glue from the glass can also be wiped off with it. This is done as follows - moisten a piece of cotton plentifully in gasoline and gently wipe the surface with it.

Traces of adhesive tape can easily appear on a plastic surface. Items made from this material great amount. These are dishes, household items, toys, furniture, etc. Therefore, a glue stain on them is the most common occurrence. However, removing them is not at all difficult. There are several methods that you should use.

Solvent or gasoline perfectly copes with the cleaning of plastic objects. But it is important to remember that applying these products to plastic in in large numbers Not recommended. It is best to first try to apply the solvent on a small area and see the result. If no changes have occurred, soak a cotton pad in the cleaning liquid and wipe off the traces of adhesive tape.
For brittle plastic you can use nail polish remover, as it is more gentle than building thinner;
Sticky stains can be easily removed from plastic with ordinary vegetable oil. And then to get rid of greasy streaks on the surface, it is enough to wipe it with soapy water.
Some housewives use mayonnaise instead of vegetable oil. It also softens glue stains very well;
For small areas of dirt on plastic, it is worth trying a stationery eraser.
In some cases, another tape helps to remove traces of adhesive tape. To do this, a new adhesive tape is glued onto the old track and it is well fixed. Then it must be very quickly and sharply peeled off the surface. If stains still remain, the procedure can be repeated several times. True, this method can only work with fresh pollution.

If traces of adhesive tape are found on the surface of the car, then you should not immediately grab the solvent and wash the glue. You should figure out what the material is made of, from which sticky stains will be removed. If it is glass, then you can try to wash it with detergents. From plastic, such traces are well removed with alcohol or with an eraser.

It is better not to put the painted surface of the car at risk using various solvents or alcohol. Otherwise, you can dissolve the varnish and paint. If the traces of adhesive tape are “fresh”, then they can be easily wiped off with vegetable oil. Sometimes it is more convenient to erase everything with gasoline or kerosene. And for older stains, motorists often use a tool such as Profam 1000. In extreme cases, such a problem can be easily dealt with at the “wash”.

How to remove duct tape from clothes

On clothes, traces of adhesive tape are less common, but if such a problem appears, then it must be addressed. Most The best way to remove sticky stains from the fabric - this is washing. But the water must be very hot, so you should pay attention to whether the fabric can withstand it. First you need to wet the stain and gently lather with soap, preferably household soap. Next, you need to leave the clothes to get wet for about an hour, and then wash. The stain should come off.

Another way is chemical solvents. But the fabric should not suffer from this remedy, so it is better to test the reaction on a small piece. There are also special liquids that are used to remove labels from clothes. They are carefully applied to the material and left for 15 minutes. Then it remains only to rinse it in warm water. This agent, like the solvent, can only be used on clothes that do not shed.

An excellent remedy that many people use when tape stains appear on clothes is baking soda. This product is in every kitchen. It is enough to dissolve a little soda in warm water and soak the fabric in it. For greater effect, it can be applied directly to the traces of adhesive tape and left for a while. Then the thing should just be washed. Often you have to wash the remnants of glue from leather clothes. There are several ways to quickly deal with this:

dirt on the skin should be wiped with table vinegar, and then washed off with ordinary soap;
soap solution;
remove traces of adhesive tape with a cotton swab dipped in solvent;
with the help of another adhesive tape - sticking it on the stain and abruptly tearing it off.

How to remove marks from double-sided tape

Double-sided tape is much stronger than stationery tape, so it is much harder to remove traces of it. And the material to which the tape is glued can be seriously damaged in the process. To avoid this, you should follow simple rules:

If the surface to be cleaned is not damaged by exposure to high temperatures hot air can be used. Pollution must be properly heated with a hairdryer so that the adhesive from the adhesive tape can be wiped off with a rag.
In the case when the material should never be strongly heated, you can try to wipe the stains with vegetable oil. To do this, pour a little oil on a small piece of soft cloth and wipe the surface with it. Then everything is washed off with soapy water.
Great for removing marks from double sided tape chemicals used by many in everyday life. You can choose washing liquids that are used in industry. They will cope with any stains, including glue.

Before you begin the procedure for removing stains from adhesive tape, you need to determine the surface material. Otherwise, you can seriously damage an expensive item due to a few barely noticeable traces of glue. If there is no certainty that the item will not suffer, it is better to start cleaning with harmless means, such as detergents or vegetable oil. Then you do not have to regret the damaged surface of the cabinet or refrigerator.

Video: how to remove traces of glue from stickers, advertising and adhesive tape

Categories

Popular