How to install interior platbands. Platbands for an interior door - types, installation options, step-by-step installation instructions. Step-by-step instructions on how to install trim on the door with your own hands

The main function of the platbands on the door frame is to hide the ugly places that form during the installation of the door. The second advantage is appearance- with architraves, the door looks beautiful, emphasizing the subtleties of the interior of the room, making the door durable, powerful and not accessible. Platband fastening can be done in several ways. To do this, you must follow the instructions for installing the door and do not rush, but check each fixed element for evenness and strength.

Existing types of door frames

Before installing door elements, you can familiarize yourself with the types of platbands produced.

Telescopic - in appearance it is no different from a standard platband. But, it has a special ledge for connection with the dobor, the door frame. When installing such a casing, the fasteners “hide” and become invisible. This makes the surfaces of the doorway of a single design without obvious dots or buttons. If measurements and calculations are made incorrectly, then there may be a gap between the casing and the box, which you can hardly shade with anything. Appearance will be damaged.
Capital. This decorating component of the door is a casing. It is mainly installed on high wooden, solid doors and serves as a finish that emphasizes the grandeur of the appearance of the door, for example, in dark oak.

But, if ordinary hinged interior doors are installed in the house, then the capital, of course, will be “out of place” and spoil the appearance. To emphasize the beauty of the door, you should choose the appropriate platband.

The principle of fastening the casing to the jamb

Necessary set of tools, materials

Before you begin to install platbands on the door frame, you should collect a set of necessary tools, without which the work will not be done. You will also need some materials:

This is all that will be needed to complete the planned work with your own hands.

Existing options for the design of door platbands

There are 4 common methods for attaching door frames. Each method has its own approach to fasteners and installation.

Ways of fastening platbands on interior doors

With finishing nails

Working with finishing nails is simple, does not require any costs and physical strength, as well as a lot of time.

Scheme of the device of the platband and the door frame

Finishing nails are required to fasten the cashing to the interior doors. This is a small carnation, which is only 4 mm long and 1.5 mm in diameter. The cap has a smooth surface (flattened). Using these nails, the casing can be removed and reinstalled.

Step-by-step process of installing a platband on a door

It will not work to hammer nails of hammers directly into the lining of the casing - it is difficult and ugly. Therefore, you need to use an electric drill. A hole is made for a carnation every 7 cm, after which carnations are driven into these holes, but not completely. Nail heads should be cut with a side cutter. After that, knock out the protruding needle a little so that it does not protrude on the surface.

Thus, it is possible to achieve good result in all respects: the appearance is not spoiled, the casing is installed. So that nothing can be seen at all, you can use a special pencil that will paint over the fasteners. The video shows in detail how to attach trim to interior doors.

Application of liquid nails

This method is used only when the platbands are made from MDF. Qualitatively done work will please the appearance of the door without nails, which will result from the installation of platbands. So, liquid nails need to be applied perfectly smooth surface, without dust and pebbles. The mounting process consists of several steps.

Pressing the platband with clamps to the door frame

On the inner surface platbands are applied using a “liquid nails” construction gun. Without waiting for time, the casing should be fixed in its place, on the basis. The element is pressed against the wall, a little time is waited (literally 1 minute), after which it is removed. It is required to wait 2 minutes, put a little more nails on the back of the casing and attach it to this place. It should be held for 2 minutes to start the reaction.

The process of applying liquid to the casing

In order to reinsure yourself, you can apply Double-sided tape. After the first application, there is 2 minutes to fix on the edge back side platband scotch.

This method has its advantages: the appearance of the door leaf remains unchanged, original. If a decision is made to dismantle the platbands, then it will be difficult to do without a tool. "Liquid nails" differ from other adhesives in their technical specifications, the main advantage is good adhesion.

The use of self-tapping screws

Installation of the platband with the use of wood screws is the key to strength and durability. This is done in the standard way.
Self-tapping screw for wooden surface must have a length of 2 cm, a screwdriver or a screwdriver is used from the tools, as well as an electric drill with a drill for wood.
In order to drown the head of a self-tapping screw in a wooden casing, you need a drill and a drill large diameter make a notch for the top of the screw. The fastener is screwed into the casing until it stops. After that, the place of the fastener is masked with a special pencil.

The principle of fastening the platband on self-tapping screws

Another option is to purchase special nylon overlays of the same color as door leaf with a box.

Using snap-on trims

The interesting name "platband with a beak" has become widespread and used in installation. This element of the door resembles the letter "G". Installation of this platband is quite simple, does not take much time. The largest segment of the element is placed in a recess and snapped into place.

Diagram of the device and installation of the platband with a latch

This method has some drawbacks. The main one is stratification. If the casing is constantly removed and put on, the latch will damage the canvas.

Basically, platbands of this form are made from MDF, and this is a material that is soft in structure. As a result, glue should be applied, and the appearance will no longer be attractive.

Installation of interior doors involves framing door structure so decorative element like platbands. At the same time, many homeowners try to cope with this work with their own hands. It is believed that the installation of platbands is easy. How to fix desired part, can be seen in the photo or video showing step by step actions. The result will be a transformation of the structure: the platbands will mask the defects formed between the doorway and the wall plane.

Splitting the door frame

Platbands can be made from:

plastics;
natural tree.

The selection of cashing by material is based on what the interior doors are made of. If the structure is wooden, then the frame must be made of wood of the same grade. And if the interior is designed in high-tech style. then metal trims will look great.

According to the format, it is customary to divide cashers into:

planar;
sculptural;
rounded.

Most often flat elements are used. And curly (sculptural) cashing is used as a decor, if the idea of an interior designer requires it.

The specifics of the installation of platbands

The platbands are mounted in different ways: overhead and telescopic platbands are distinguished. Wooden or MDF platbands are most often attached using liquid or ordinary nails without hats. But if you decide to work with nails with hats, but they need to be “driven” deep into the wood, and then hide these places with a corrective wax pencil or acrylic sealant of an acceptable shade.

Application liquid nails for installation is allowed only if there is a leveled plane of adjacent walls. Otherwise, gaps form between the wall and decor details.

Saw angle selection techniques

To correctly choose the angle of the cut, you need to pay attention to the high relief of the casing with front side, and then select one of the ways to perform the cut.

If the fastenings of the parts have a flat plane, then the cut is made at an angle of 90 °. A similar saw cut angle is required for mounting a cashing with a capital, while joining is carried out horizontally or vertically.
Rounded platbands need to be cut at an angle of 45 ° - the main thing is to do it carefully, in order to avoid gaps during further joining.
An even cut is made with a miter box or a hacksaw with fine teeth. Ideally, you need to cut the blank into trimming machine with turntable.

Advice. To give aesthetics washed down, it should be painted over with varnish before installing the casing.

About telescopic cashing

Such frames are suitable for mounting without fasteners. Telescopic products do not require the use of additional extensions, since it is possible to correct the gaps between the device and the width of the doorway by aligning the sliding frame. In this case, the tongue in the form of a beard is inserted into the recess on the door frame.

O existing differences in the operation of a particular telescopic product, you should read the instructions attached to it: schemes and installation technologies for products from different manufacturers may vary.

Installation of platbands: step by step instructions

Advice. The resulting gaps between the frame plates are removed with a sealant. It is worth filling the gaps with them after the construction tape is glued.

How to install trim on the door: video

Platband installation: photo

Door frames play decorative role and are installed in order to hide the defects formed after the installation of the door. That is, they are a frame and hide the gap between the door frame and the opening. The material for their manufacture can be: wood, plastic, MDF.

They are mounted last, when the rest of the decoration is completed. Therefore, before installing them, you need to figure out and understand how to properly and accurately install them on interior doors.

How to fix door frames

You can use one of four methods to do this:

on liquid nails;
fasteners called "beaks";
on finishing nails;
self-tapping screws.

Finishing nails

This method of fastening has such advantages as: ease of installation and, if necessary, dismantling. Even an inexperienced person will cope with such a task. Therefore, this method is the most popular.

For high-quality fastening cashing will need nails with a narrow head. The length of the nails must be at least 4 cm, since they must enter the door frame by 1.5 - 2 cm.

Tip: If there are no nails with a small hat, but you don’t want to buy, you can cut off the hat from ordinary ones.

Before starting the installation, on the trim strip, mark the places for driving in nails. They should be evenly spaced along the entire length of the bar. The recommended step between them is 0.5 m.

Video: How to properly install door trim

Naa liquid nails

This special construction adhesive is available in tubes (tubes). In order to fix the casing, on it with reverse side apply glue. Then the bar is pressed against the wall for a few seconds. All installation is completed.

The advantages of this method include ease of installation and on the bar, on the front side, there are no traces left as in the first case. The downside is that the mount cannot be considered reliable.

self-tapping screws

Simple and at the same time reliable way mounts wooden architraves. For work, you will need wood screws with a diameter of 6 mm. The platband is marked for fastening in increments of 50 cm, and small holes are drilled in it.

The holes will prevent cracking of the board when screwing in the screws. To prevent the heads of the self-tapping screws from being visible, they are sunk, for this you need to make a small indentation with a drill.

Fastening with special "beaks"

For fastening with "beaks" use the instructions attached to the product. The advantage of this method is ease of installation and attractive appearance.

The disadvantages include the fact that now most people use MDF trim. And when you remove the "beak" they can exfoliate.

Installation of door frames

To work, you will need to prepare tools:

hacksaw;
fasteners;
goniometer or miter box;
square;
roulette.

Work progress:

The bar is applied vertically and mark the required length. Then, mark a right angle with a square and cut it off.
Now it is applied again, aligned and marked on inner corner boxes.
Using a goniometer, mark an angle of 45 ° and cut off.
Do the same with the platband on the other side.
After preparing the two blanks, you can proceed to their installation. To do this, carnations are driven into the door frame in increments of 50 cm. Then they bite off their hats so that an acute angle is obtained. The length of the nails on the surface of the box must remain at least 5 mm.
For reliability, glue can be applied to the bar.
Now a platband is applied to the door frame and with a mallet or through a bar wrapped in a rag, they are planted on carnations by tapping.
After mounting the two side parts, they proceed to marking the top.
The corners of the upper casing are measured by attaching it to the side ones.
Having cut off the excess, the top is nailed in the same way as the side trim.

Types of trim for interior doors

Manufacturers offer us a huge range of door frames. The shape can be: figured, teardrop-shaped and semicircular.

The material from which they are made is also diverse, it is MDF, and plastic, and natural wood, aluminum or steel. The trim can be decorated with: laminated film, veneer, plastic or paint.

Telescopic casing

It looks like a regular one, differs from it by the presence of a ledge, which serves to connect with the door frame and the extension. If the box turned out to be already an opening, it would be the best option.

In case of improper installation, a gap will remain in the structure, which will spoil the appearance. Therefore, when installing a telescopic casing, it is necessary to do everything correctly, carefully and slowly.

Door platbands are mainly used to hide its shortcomings that arose during the work associated with its installation. They also simply ennoble it, making it more beautiful and attractive. If a person buys new design, then he needs to without fail decide how to mount the platbands on the door. In fact, there are several ways to do this.

Next, 4 methods will be considered. Each of them has its own advantages and disadvantages. Not all of them can be used in a given situation. Here it will be described in detail how each of them can be used. Door platbands can become a real decoration of the interior or simply ruin it. It all depends on right choice mounts.

Tools and materials

Of course, before starting the installation of door frames, it is imperative to prepare the entire essential tool and materials. So, for work you need to purchase:

side cutters;
drill or screwdriver;
screwdriver
a hammer;
self-tapping screws;
finishing nails;
liquid Nails;
drill for wood;
pencil;
wooden platbands on latches.

It is this set that is quite enough to complete one of the proposed mounts. Of course, in each case, it is worth looking at only those things that are necessary.

Application of finishing nails

This method of fastening door frames is used quite often. This is because it is quite simple. Thanks to this method, you can remove the casing and install it in its rightful place at any time. The work is carried out quite quickly, if not primitively. Experts recommend using not ordinary nails, but those that have a flattened surface on top. Their length should be approximately 4 cm.

Scheme of the platband with dimensions.

In this case, the diameter is selected at least 1.5 mm. Here you can think about how to make your work a little easier. Hammering nails directly to the casing is quite difficult. Moreover, this procedure can harm the structural element.

To prevent this from happening, you can use a drill. It will allow you to drill holes in the casing. They should be placed at a distance of approximately 5-7 cm from each other. Only in this way can an acceptable result be achieved. Many may think that nails that stick out on the outside of the structure can spoil the overall aesthetics. In fact, this defect can be easily eliminated. For this, side cutters are taken. With their help, the nail heads are removed. You can paint over them with a wax pencil.

This method is also quite effective. From afar, no one will understand that door frames secured with nails. Now we can state the fact that the work is completed, which means that the first method is fully considered. Now you can move on to the second option.

Using Liquid Nails

This method has certain limitations. It can only be used in cases where the platbands are made of MDF panels. In this case, the surface on which the fastening is made must be perfectly smooth. The work itself is quite simple, if not primitive.

On the reverse side of the casing, you need to apply liquid nails, and then lean it against the wall with this side. Then, without fail, you need to press so that both surfaces tightly grab each other.

After that, the platband must be removed from the wall. Then you need to wait about two minutes before proceeding to further action. After that, the casing is again applied to the same place. It is not worth keeping it, since one material will be attached to another for a long time. To fix the door frames in their rightful place, it is best to use adhesive tape. It is worth immediately highlighting the main advantage of this method.

It lies in the fact that no traces remain on the front side of the casing mechanical impact. This allows you to preserve the aesthetics of the room, and often this is the main thing that is required from the platbands. If a person decides to take them off, then it will be extremely difficult to do this. The thing is that liquid nails have a fairly high strength. However, if possible, then this method should be used as one of the most reliable.

Fastening with self-tapping screws

Fastening platbands with finishing nails is simple and reliable.

Fastening with self-tapping screws is standard. It allows you to create a really high-quality connection. You will have to work with wood, which means that self-tapping screws must be used specifically for this material. Good, modern market offers a wide variety of solutions. As for the length of the fastener, it must be at least 2 cm.

For work, it is best to use a screwdriver or drill. With their help, screwing screws will be much easier. In order for the fasteners not to peek out above the casing, it is necessary to make small holes using a pre-prepared drill. It is taken large enough in diameter so that you can easily work with the surface.

Self-tapping screws do not always look attractive, so if possible, their hats should be hidden.

For this, they are used various solutions. For example, you can easily buy special decorative overlays. A wax pencil will do the job perfectly. It will fix the defect in a few seconds. After that, the door will look very beautiful and attractive.

The use of cladding on latches

This method of fastening has also become quite widespread. Outwardly, such a casing slightly resembles the letter G. It is for this reason that it was called the casing with a beak. This is the easiest mounting method. That section of the part, which has the largest dimensions, is placed in a special recess. After that, it is snapped. This method, although popular, has some disadvantages.

The most important thing is that the casing itself can gradually delaminate. This is due to the fact that the mount itself damages it as a result of removal or putting on. This very often leads to the fact that at the junction the casing simply collapses. MDF panels are not as powerful as other options. After several such repetitions, it is likely that it will be necessary as additional fastening use glue. This may result in a permanent connection. As a result of such manipulations, the external appearance of the platbands also suffers.

So, four main options for fastening door trim were considered above. As you can see, they all have the right to exist. Each of them has a certain set of advantages and disadvantages. It is very important in a particular situation to correctly determine best option mounts.

Cashing the doors is not particularly difficult. However, such work should be approached with all seriousness, since it is from the correct quality installation platbands largely depends on the attractiveness of the installed door.

Types of platbands

Do-it-yourself door cashing can be done using molded products from natural wood, MDF or plastic. Experts strongly recommend, first of all, to resort to the use of veneered or laminated platbands made of MDF or PVC. Such platbands are not afraid of moisture, exposure to steam and serious temperature changes. Naturally, platbands made of natural wood look the most attractive in aesthetic terms. At the same time, this option is the most expensive.

Materials for the manufacture of platbands and installation features

As mentioned above, there are several common materials for making architraves: wood, MDF and plastic. Speaking of installation wooden products, then the cashing of doors in this case can be carried out with the landing of platbands on or fasteners in the form of the thinnest nails without hats. If desired, the caps can be carefully cut off by yourself. Platband fastening on metal nails looks most neat when disguising hats acrylic sealants or corrective

Cashing the input from MDF is performed in a special way. To ensure that the appearance of the slats remains as attractive and close to natural wood, all guide holes for fastening to nails are drilled here in advance. Alternatively, MDF trims can be glued in the same way as wood products.

Concerning plastic architraves, then in order to avoid the appearance of defects, it is recommended to glue them. Wherein plastic products perfectly cover the impressive irregularities of the walls.

Instruments

Cashing doors requires a whole arsenal of tools. For fast and high-quality work, you will need the following:

end panel saw;
roulette;
jigsaw;
pliers;
small hammer;
small furniture nails;
pencil;
building corner.

Preparation for work

How to cash out a door? Before proceeding with specific actions, care must be taken to level the surface of the adjacent walls. The presence of perfectly smooth smooth walls is a prerequisite for installing platbands. Otherwise, there is a high probability of noticeable gaps between the cashing and the wall. Among other things, you should be as careful as possible with the platbands themselves, because the appearance of even small scratches may spoil the attractive appearance of the product, which will entail unnecessary waste.

The main nuances in the performance of work

To make the fastening of the platbands on the nails invisible, it is worth using a color that matches the shade of the surfaces to hide the hats. Cashing doors in the presence of even walls allows the use of liquid nails. At the same time, the main difficulty remains to prevent the occurrence of noticeable gaps between individual planks.

To avoid errors when cutting the upper casing, the edges of the plank are led behind the vertical parts. This approach to the installation of platbands makes it possible to achieve complete coincidence of all structural elements.

Cashing on the door - installation

Installation is carried out according to a number of successive stages:

First, you should dismantle the old cashing, if any. Dealing with these jobs is pretty easy. It is enough to have a small mount or screwdriver, with which the old casing is pry off. The main thing is not to cause damage. Also, at the end of dismantling, it is necessary to remove the nails using pliers.
How to install cash on the door? Upon completion of the dismantling of the old platbands, it is necessary to proceed with the installation of new additional strips. It is recommended to give preference to products with a factory edge lining.
First of all, the left and right additional strips are fixed, which are cut according to the length to the desired height. After, doing the work according to the same principle, the upper bar is installed. To strengthen the structure, the side and top extensions can be fastened with self-tapping screws.
The platbands are fixed around the entire perimeter, starting with the installation of the right or left platband.
Using a construction angle and a panel saw, the edges of the cashing are filed at an angle of 45 o. The angle is marked with a pencil, and a neat washed down is performed. At the same time, distortions and chips on the front surface should be avoided. When performing such work, it is better to give preference to saws with the smallest teeth.
After cutting the corners, the distance from the floor covering to the bottom of the upper extension is measured, after which 5 mm is added to the resulting value in the form of an allowance. The resulting length is postponed from the previously sawn cashing angle. Unnecessary top part cut off with a jigsaw or small saw. If there is a cashing with fastening in a groove, in this case, the required length should be determined by its inner edge.
How to nail cash on the door? With the help of a hammer and small nails, cashing is attached to door strip or block. It is most convenient to remove nail heads with the help of wire cutters. Nails are recommended to be hammered at intervals of no more than every 50 cm.

If, as a result of the above work, with consistent observance of all stages, it was possible to achieve an ideal fit of all the constituent elements of the cashing, the existing small gaps can be carefully hidden using a special sealant, the shade of which is matched to the color of the door. Installation of platbands from the back door frame carried out according to the same principle.

Categories

Popular