Rack or stretch - which ceiling is better to do when arranging a bathroom? Which ceiling is better to make in the bathroom: make the right choice

Not sure which ceiling to choose in the bathroom? Our review article will help you decide on the pros and cons of slatted and stretch ceilings.

The ceiling is such an element of the interior that gives volume to the room and completes the composition. What is it like finishing touch in finishing. From the choice of material for the ceiling in the bathroom, not only it depends appearance but also inner peace.

After all, the bathroom is a room with a special microclimate. Therefore, we will choose which of them is better.

There are a lot of materials for finishing the ceiling. But from the variety of types of finishes, stretch and slatted ceilings are most suitable for the bathroom. The reason for this is that these materials are resistant to:

High humidity.
Temperature fluctuations.
Condensate.

simple rack ceiling

Slatted ceilings

The simplest kit for mounting rack ceilings is:

Two U-shaped profiles. They are mounted on opposite sides of the room.
2(3) stringers. This is a metal tire with teeth. They are fixed between the profiles and the slats are hung on them.
Reiki (PVC panels). In some designs, they are complemented by layouts.
Spring hangers. Serve to support the stringer.

The remaining elements serve as an addition and carry only a decorative function. Such a ceiling can be made by yourself. Special skills and special tools are not required here.

How to mount plastic panels

Lamps, a ventilation grill or other devices, are quite simple to build into a slatted ceiling. In case of damage, it is enough to change just one rail, and the original appearance will be restored.

minus y rack ceiling one is incomplete. In essence, it is a metal or plastic, chic-looking lining, an ordinary ceiling made of PVC panels. From the strait from above, it will not protect, the condensate will pass into the subceiling space. But in price, it clearly outperforms stretch ceiling.

Stretch ceiling

The basic stretch ceiling kit is:

PVC film. This is a heat-shrinkable material, of various textures and colors, for installation it is necessary to heat the room with a heat gun. Extremely heat resistant.
Cloth on a fabric basis. Temperature indifferent. Stretched by hand. The tension is very high. Coloring after installation is allowed. The texture is always matte.

Everything else in stretch ceilings, only decorative elements. Although the equipment is smaller here, it is hardly possible to install such a ceiling yourself. Wanted special tools and knowledge of workflow. It will no longer be possible to make a stretch ceiling with your own hands - you will have to involve specialists.

It should be immediately noted that it is highly undesirable to put glossy stretch ceilings in the bathroom. Often, the condensate that settles on them clearly manifests itself as divorces. And wipe the glossy pvc film It's not easy, and it's extremely tedious. Such a ceiling is very easy to damage. And given the serious temperature load in the bathroom, it is better not to consider PVC ceilings. It's a matter of personal choice though.

But fabric stretch ceiling in the bathroom looks like a glove. His important feature is invisibility. He does not draw attention to himself, he is not pretentious. It just does its job. And many people, even master finishers, at first take it for a well-made plasterboard ceiling.

Everything is also easily integrated into stretch ceilings. necessary devices(lamps, ventilation). But fabric stretch ceilings have a serious drawback - the price. The cost of such a ceiling, together with installation work, will cost at least twice as much as installing rack ceilings.

Outcome

Often people refer to the ceilings in the bathroom as a device for the General Staff bunker. They mentally count on the catastrophic loads that this ceiling will have to endure "in which case". So which ceiling to choose in the bathroom? Everything is up to your taste and wallet, these two types will be approximately the same in cost.

You should not take into account what the ceiling in the bathroom can withstand. The main thing is that the bathroom caresses the eye, and the decoration of its ceiling would not become an unbearable burden for the family budget.

Today we will talk about two ceiling designs - undisputed leaders in bathroom design. Rack or tension: are they really equivalent in practicality and decorative value, or are there differences, without taking into account which quality repair do not make a bathroom - read in today's review.

Description of structures

The device of a stretch ceiling is familiar to many due to its simplicity. It consists of two parts: a baguette profile fixed to the walls along the perimeter of the room, and a canvas or film stretched inside. main feature The tension system is enclosed in its factory production, but a minimum of installation work is carried out on site.

The design of the rack ceiling is more complex and at the same time more interesting. The fastening profile system looks very familiar, something similar is used when assembling the frame for skin plastic clapboard. guide U-profile, however, has an additional decorative function, framing the ceiling around the perimeter and providing a dense, beautiful abutment of the ceiling to the walls. And instead of the usual rack-mount profiles, special stringers are used, on which shoulder straps (slats) are fixed by snapping into slots.

Aesthetics and decorative value

Differences in the device due to the difference in appearance. This is perhaps the most important component of any ceiling system: if we are still ready to put up with the cost or complexity of installation, then flaws in design and appearance immediately push the type of ceiling in question to the end of the list.

Fortunately, both types of finishes we are considering can be safely attributed to highly aesthetic ones, they are just different and must be combined with the overall style concept of the bathroom interior. Stretch ceilings are good because they allow you to withstand the spirit of minimalism, which is so popular these days. This is especially true for small bathrooms, where a ceiling with some kind of pronounced pattern will attract too much attention.

Glossy vinyl canvases have a very interesting visual effect: reflected in mirror finish, the walls get their logical continuation, so it is customary to perform the corner connection in the middle of the top row of tiles. Great alternative mirror ceilings, besides, there is always the opportunity to qualitatively choose colors from a wide palette for a complete combination or diversify the mirror surface with a light pattern.

Matte fabric ceilings — timeless classic, this finish remains completely invisible and allows you to focus on more interesting and unique things— high-quality laid tiles, plumbing and decorative installations.

Slatted ceilings in terms of appearance are complete opposite tension. Longitudinal stripes, at first glance, do not harmonize too much with the “checkered” look of the tile, although this depends more on the format of the tile. However, upon closer examination, this type of ceiling fits well into "sterile" interiors and becomes a stylish accessory that looks really rich.

The color scheme is also diverse, and the strict direction of the stripes helps to visually correct rooms with not very attractive geometry, for example, very elongated ones. Slatted ceilings, unlike stretch ceilings, are distinguished by a more free choice of shape. Based on them, it is possible to make both multi-tiered structures with radius edges and wavy planes, for which special types of panels and mounting profiles are intended.

Appearance or practicality

Second after appearance the most important aspect- how will the ceiling behave in conditions high humidity and how easy it is to maintain. Vinyl gloss turns out to be the most tricky in this regard: drops of condensate that form constantly spoil the specularity, especially if the ceiling is noticeably lowered. In this case, one cannot do without special means cleaning: stretch ceiling mortar and brushes, without them, washing a sagging canvas can be another task.

Fabric covers are surprisingly easy to care for and clean. The antistatic cloth does not collect dust and does not fog up due to its high vapor permeability. All minor impurities, such as salt stains from splashes, “hide” against the background of a slight visual noise formed by the microtexture. The fabric of the canvas is impregnated with polymers that prevent rotting and mold formation.

Slatted ceilings behave in many ways similar to glossy ones. Metallized polished inserts lose some of their attractiveness if traces of dried drops appear on them. However, let's be fair: this is far from the same as in the case of a mirror surface, and the surface fogs up somewhat less due to the presence of gas exchange with the area under the draft ceiling. By the way, due to the vapor permeability exhaust channel can be placed hidden, the same applies to fabric stretch ceilings.

From the point of view of the installation process

For the end user, the most problem-free will be tension film ceilings. Specialists will independently measure, make a canvas and carry out installation in a couple of hours. You cannot do this work yourself, because you need heat gun. You can save money by installing lock profiles yourself, but how significant will such savings be, taking into account not large area bathroom?

Fabric ceilings can be mounted completely independently, starting from the fastening of the baguette profile and ending with the stretching of the canvas itself. All that is required from the special tool is a rounded spatula, with which the fabric is tucked into the groove, and a pair of clean gloves.

Slatted ceilings in installation are the most difficult, but at the same time, the process of assembling them is quite an exciting activity. It all starts with fixing the starting guide profile around the perimeter of the room in a common horizontal plane. Markup is easiest to do laser level, but in the absence of such, an ordinary water one will do. Before fixing in the central shelf of the profile, it is necessary to make a perforation in increments of 40-50 cm, while drilling is better with outside so that the remaining burrs do not interfere with a snug fit to the wall.

After fixing the guide profiles, the supporting stringers are mounted and the strips are assembled, then the inter-racks are inserted between them. decorative profiles. The main difficulties come down to trimming the extreme strips and making grooves for installation spotlights. However, the material of the panels is quite malleable and only a segment knife and metal shears are needed to work with it.

Care and maintainability

Although the bathroom cannot be called a room where domestic activity is in full swing, damage to the ceiling can take place even here. The most expensive in terms of repair can no doubt be called a film stretch ceiling. In case of damage to the film, it will not be possible to do without a little blood: you will have to change the entire canvas, which is quite expensive.

However, the fabric canvas also changes entirely, only its cost is much lower. In addition, there is a problem to pull out the remnants of the fabric from the lock mounting profile, but with a tightened canvas, this is quite possible to do.

Unlike lining, the rack ceiling will not have to be completely disassembled in case of damage to one or more panels. The rail is simply drilled in several places and pulled out, a new one is inserted in its place and the interpanel profiles are returned to their place.

In care, both of the types we have considered ceiling finish very unpretentious: they do not absorb pollution, do not form a breeding ground for mold and are not subject to rotting or corrosion. Either wash them clean water, or compositions that do not form soap film to which dust adheres. Naturally, there is no question of any painting and other “new things”: the materials retain their appearance for several decades.

Today we will talk about two ceiling designs - the undisputed leaders in the arrangement of bathrooms. Rack or tension: are they really equivalent in practicality and decorative value, or are there differences, without taking into account which a high-quality bathroom renovation cannot be done - read in today's review.

Description of structures

The device of a stretch ceiling is familiar to many due to its simplicity. It consists of two parts: a baguette profile fixed to the walls along the perimeter of the room, and a canvas or film stretched inside. The main feature of the tension system lies in its factory production, while a minimum of installation work is carried out locally.

The design of the rack ceiling is more complex and at the same time more interesting. The system of fastening profiles looks very familiar, something similar is used when assembling the frame for lining with plastic clapboard. The guide U-shaped profile, however, has an additional decorative function, framing the ceiling along the perimeter and providing a tight, beautiful connection between the ceiling and the walls. And instead of the usual rack-mount profiles, special stringers are used, on which shoulder straps (slats) are fixed by snapping into slots.

Aesthetics and decorative value

Glossy vinyl canvases have a very interesting visual effect: reflected in the mirror coating, the walls get their logical continuation, so the corner connection is usually made in the middle of the top row of tiles. An excellent alternative to mirror ceilings, besides, there is always the opportunity to choose high-quality colors from a wide palette for a complete combination or to diversify the mirror surface with a light pattern.

Matte fabric ceilings are timeless classics, such a finish remains completely invisible and allows you to focus on more interesting and unique things - high-quality tiling, plumbing and decorative installations.

Slatted ceilings in terms of appearance are the complete opposite of stretch ceilings. Longitudinal stripes, at first glance, do not harmonize too much with the “checkered” look of the tile, although this depends more on the format of the tile. However, upon closer examination, this type of ceiling fits well into "sterile" interiors and becomes a stylish accessory that looks really rich.

Appearance or practicality

The second most important aspect after the appearance is how the ceiling will behave in conditions of high humidity and how easy it is to maintain. Vinyl gloss turns out to be the most tricky in this regard: drops of condensate that form constantly spoil the specularity, especially if the ceiling is noticeably lowered. In this case, you can’t do without special cleaning products: a solution for stretch ceilings and brushes; without them, washing a sagging canvas can be another task.

Slatted ceilings behave in many ways similar to glossy ones. Metallized polished inserts lose some of their attractiveness if traces of dried drops appear on them. However, let's be fair: this is far from the same as in the case of a mirror surface, and the surface fogs up somewhat less due to the presence of gas exchange with the area under the draft ceiling. By the way, due to the vapor permeability, the exhaust duct can be placed hidden, the same applies to fabric stretch ceilings.

From the point of view of the installation process

For the end consumer, stretch film ceilings will be the most problem-free. Specialists will independently measure, make a canvas and carry out installation in a couple of hours. You cannot do this work yourself, because you need a heat gun. You can save money by installing lock profiles yourself, but how significant will such savings be, given the small area of \u200b\u200bthe bathroom?

Slatted ceilings in installation are the most difficult, but at the same time, the process of assembling them is quite an exciting activity. It all starts with fixing the starting guide profile around the perimeter of the room in a common horizontal plane. Marking is easiest to do with a laser level, but in the absence of such, an ordinary water level will do. Before fixing in the central shelf of the profile, it is necessary to make a perforation in increments of 40-50 cm, while drilling is better from the outside so that the remaining burrs do not interfere with a snug fit to the wall.

After fixing the guide profiles, the load-bearing stringers are mounted and the strips are assembled, then inter-rail decorative profiles are inserted between them. The main difficulties come down to trimming the extreme strips and making grooves for installing spotlights. However, the material of the panels is quite malleable and only a segment knife and metal shears are needed to work with it.

Care and maintainability

However, the fabric canvas also changes entirely, only its cost is much lower. In addition, there is a problem to pull out the remnants of the fabric from the lock of the mounting profile, but it is quite possible to do this with the fabric pulled together.

In care, both types of ceiling finishes we have considered are very unpretentious: they do not absorb dirt, do not form a breeding ground for mold, and are not subject to rotting or corrosion. They should be washed either with clean water or with compositions that do not form a soap film to which dust adheres. Naturally, there is no question of any painting and other “new things”: the materials retain their appearance for several decades.

When renovating the bathroom, you also need to change the ceiling covering. But in such a specific room, certain requirements are imposed on the ceiling. And naturally the question arises, which ceiling is better to make in the bathroom, so that it is aesthetic and practical, that is, it is combined with the interior of the room, but at the same time, so that it is easy to care for it. Let's try to understand this difficult question.

The ceiling for the bathroom requires special attention, as this is a room with high humidity. Consider the basic requirements for a ceiling covering in a room with constant dampness:

The finishing material must be moisture resistant, since in this room a damp effect is exerted on the ceiling both from above (flooding by neighbors, leaks) and from below (steam, condensate, shower spray). A good ceiling must withstand all exposure to moisture.
Ease of care is another important requirement. The better and easier to care for the surface, the more popular it is. The ideal option will be, if it is enough to periodically wipe it, because in this room, as a rule, there is very little free space for "maneuvers" during cleaning.
Aesthetic requirements are also important for the bathroom. The ceiling in the bathroom should be made in accordance with overall design the interior of this room. While taking a bath or shower, it should be pleasant to look up.

In addition, the bathroom ceiling material must be durable, environmentally friendly, fire resistant, antibacterial, easy to install and affordable.

Since we have listed the basic requirements for the ceiling in the bathroom, we can go directly to the consideration of one or another type ceiling covering. There are many options for decorating the ceiling, but not all materials and types of finishes meet the listed requirements.

Painted plastered ceiling

Plastering and painting the ceiling water-based paint is simple, cheap and stylish option finishes. To make it original, it is better to paint the surface in several colors in a variety of bold combinations. If there is no flooding from neighbors, then such a ceiling will last about 10 years.

At the same time, all materials (putty, primer, paint) must be waterproof and antibacterial, and the surface for touch-up must be perfectly even. If there is on the ceiling big swings between floor slabs, then leveling the surface with putty will require a lot of effort and financial investment. Then it is better to make the ceiling in the bathroom from other materials.

This option has other significant disadvantages:

It is easy to care for a painted ceiling, but it is impossible to remove the darkening formed from time to time, since the paint absorbs dirt very quickly. But you can very easily freshen up the coatings by rolling paint over the old coating, and the ceiling will shine again.
Putty is very difficult to resist fungi and mold, which is why you need to choose high-quality products with an antibacterial effect. But this does not guarantee that harmful microorganisms will not appear on the ceiling in the bathroom, since constant dampness is ideal conditions for their development.
With this finish option, it is impossible to make built-in lighting, which is so popular today. It is also impossible to hide some communications under the putty.

However, the cheapness and simplicity of this method make many people choose this particular type of ceiling surface finish.

Ceiling made of plastic panels

PVC panels - another cheap, but at the same time aesthetic and practical way ceiling finishes in the bathroom. This is a durable, lightweight and moisture-resistant coating that is easy to install and does not require additional finishing. Plastic panels do not require special care Periodic wiping with a damp cloth is sufficient. An important advantage of such a ceiling is the possibility of installing spotlights.

However, plastic siding there are also disadvantages:

Dirt gets into the seams at the joints of the panels, which will sometimes need to be cleaned with a brush.
If there is poor ventilation in the room, then a fungus can settle in the seams, which is very difficult to remove. Therefore, periodically it is necessary to treat the PVC surface, especially the seams, with chlorine-containing detergents.
Over time, under high humidity, even galvanized metal carcass may be subject to corrosion. But for 15 years, the panel ceiling will definitely serve faithfully.

To update the coating, you will have to completely dismantle the old panels and ceiling plinths and then re-install new PVC panels.

Ceramic tiles look great on the ceiling

Until recently, to the question of which is better to make the ceiling in the bathroom, many answered that ceramic tile- it's high quality, beautiful and practical, and they were absolutely right. The tile on the ceiling really looks expensive, stylish and has a number of other advantages over many other ceiling coverings:

tile is one of the most durable facing materials;
tiles are safe for human health, as they do not emit toxic substances;
ceramics perfectly withstands moisture, frost-resistant, does not burn, hygienic, resistant to wear;
the tile is very unpretentious in care, it is not subject to destruction from the effects of the most aggressive chemical detergents;
ceramic tiles do not fade in the sun over time;
has a huge range of colors, sizes and textures.

The tile could be called the best option for finishing the ceiling in the bathroom, if not for two significant disadvantages:

Impossibility of installation of built-in lighting.
Tiles are very difficult to lay on the ceiling.

Therefore, for facing the surface, you will have to use the services of a professional, and instead of spot lighting, install wall sconces.

Features of the rack type ceiling

The rack ceiling, like PVC panels, is assembled on a frame. However, rails can be not only plastic, but also metal (aluminum or steel). Aluminum rails are much lighter than steel and do not rust. The slatted ceiling can be made in various colors, as narrow long panels are available in chrome, gold, patterned or plain.

Even a beginner can assemble a rack-type ceiling. During installation, the rails are very flexible, which allows you to make the ceiling curved or even multi-level. The surface of the rails is carefully polished, almost like a mirror, therefore it has reflective properties. In addition, it is very easy to care for such a surface.

Of course, there are also disadvantages of ceiling rails:

1. Even with light soiling interpanel seams untidy stripes of a dark shade are formed.
2. This is a rather specific finishing material that is not suitable for every style of interior design.

Tiled false ceiling

On a similar frame, you can make a ceiling from finished facing sheets - suspended tiles. The result will be ceiling surface cellular or cassette type. Such a surface does not require priming or painting, which is a great advantage, since ceiling tiles are created with an already processed surface in a variety of variations.

Suspended slabs are made from various moisture-resistant materials: plexiglass, plastic, metal, mineral modules. With backlighting, such designs look just great. Ideal for minimalism and high-tech style in the interior.

However, ceilings of this type do not organically fit into all styles of interior design. Sometimes hanging tiles look too formal and cold, which is unacceptable for the relaxing atmosphere of the bathroom.

Plasterboard ceiling

The plasterboard construction is assembled on a metal or wooden frame. After installing the frame, it is sewn up with sheets of moisture-resistant drywall, which contains various protective additives from excessive moisture and fungus. The “correct” drywall, when exposed to moisture, will not dampen, rot or crumble.

Plasterboard constructions allow you to create an original bathroom. After all, such a ceiling can be made multi-level and winding, as well as beautifully and unusually positioned spotlights built into the frame. In addition, such a coating allows you to hide wires, pipes and ventilation communications, as well as irregularities and flaws in the ceiling, creating a flat, smooth and durable surface.

There are also disadvantages, among which are:

Relatively short service life - from 7 to 10 years.
Expensive materials (profiles, self-tapping screws, drywall sheets, putty, primer, paint).
The need to periodically refresh the outer layer by repainting the surface.

But when repairing, you do not need to build a new frame.

Stretch ceiling - beautiful and practical

Stretch ceilings are very popular today, because it is great option for the bathroom. Such a coating will protect against a flood, will not dampen, will not lose its properties. This ceiling will easily fit into any interior, creating a modern, stylish and sophisticated design for every taste.

For stretch ceilings a large number of options for colors and design, including multi-level designs with many built-in lights. Stretch ceilings are glossy and matte, plain and patterned, with convex patterns and 3D photo printing. Care of such a surface consists in periodic wiping with a well-wrung damp cloth.

Now about the cons of using such a finish in the bathroom:

The impossibility of self-assembly.
Easily damaged by hard and sharp objects.
Possible yellowing in places where spotlights are installed.

In all other respects, the stretch ceiling significantly outperforms other types of cladding.

Mirror ceiling will increase the space

When using real mirrors, the view of the ceiling is simply amazing in its luxury. But the cost of such beauty is very significant. The frame for this design is made of metal, reinforced (the same is used for attaching drywall). To mount the mirrors on the frame, holes are drilled in each.

It is better to entrust the assembly of such a ceiling to a person with experience in such work, but the service life of such a ceiling will be quite long. Behind such a ceiling is required meticulous care, it must be carefully rubbed and polished to a shine.

But there are more available options ceiling in the mirror-type bathroom - their price is much lower. For example, light shiny plastic panels are perfect, installing them using the Armstrong system. Installation is quite simple and easy, and even a novice amateur will cope with this task. But this system has a very weak frame, it is very sensitive to corrosion, which undermines it in a very short time.

Disadvantages of mirrored ceilings in bathrooms:

This type of ceiling creates a lot of shine, which not everyone likes, especially if you are in the room for a long time, and the ceiling is not very high.
Another disadvantage is care, since the surface is mirrored, the problems will be the same as with a regular mirror. Care is further complicated by the fact that, unlike a conventional mirror, the ceiling is not located vertically, but horizontally and above your head.

Original glass ceiling

Having also touched on the topic of the ceiling for the bathroom, one cannot help but recall such a view as a glass ceiling. Such ceilings have a number of significant advantages and disadvantages. Glass is not afraid of moisture, splashes and high temperatures, easy to clean. Glass ceilings are 100% environmentally friendly - they never have mold, and bacteria do not multiply, glass does not contain or emit toxic substances. The impact of aggressive environments on them has no effect. If necessary, damaged plates can be easily replaced.

Due to its optical properties, glass visually enlarges the space, and well-chosen light will create a mood of mystery and intimacy, lightness and airiness. Glass ceiling with stained glass or photo printing - this is a very original solution.

For the ceiling in the bathroom, you can use both matte and glossy glass with varying degrees transparency. You can make a ceiling using photo printing in the form of stained glass windows. One has only to dream a little and the bathroom will change significantly, acquiring an amazing look and significant volume.

Vinyl wallpaper - stylish and cheap

Vinyl wallpaper can be used to finish the bathroom ceiling; thanks to the outer synthetic film, they are not afraid of moisture and water. Before sticking vinyl wallpaper it is required to prepare the surface well so that there are no defects, otherwise the ceiling will not look aesthetically pleasing and will spoil the appearance.

There should be no gaps between the joints, as this can cause the fungus to spread over the entire surface of the ceiling. If necessary, the wallpaper can be repainted several times.

Which option to choose?

from a design point of view

As we said above, first consider how the design of your ceiling and the entire bathroom will be in harmony with the rest of the interior of the apartment. For example, "classic" is snow-white version. Moreover, it can be both hemmed and plasterboard, stretch or hinged, with built-in lights or not. smooth and Smooth surface white color(even if painted) is perfect for any interior. special chic This white ceiling and a black floor (and sometimes walls), such a contrast looks very attractive.

Using textured ceilings, you can "play" with the dimensions of the bathroom, visually making it wider, higher or lower. These include modular, tile, cellular and rack-type designs. All these types of ceilings have a pronounced texture of planks or tiles.

If you have a large bathroom, you can use multi-level ceilings, it is easier and cheaper to make them from drywall. A round convex design with lamps above a round bathroom will look great.

from a practical point of view

If you look at which ceiling is better to make in the bathroom from the side of practicality, then stretch ceilings and ceilings made of PVC panels definitely share the first place. Stretch ceiling in the bathroom is chosen by many people. Thin, but very beautiful and waterproof PVC film is both practical and looks very nice.

In conclusion, we can say that no matter what type of ceiling you choose, the most important thing is that it meets your requirements. We have covered all types that might be suitable for a bathroom. And you should not save money and should give free rein to your imagination for the bathroom, and then every day you will be happy to enter this beautiful room.

Categories

Popular