Unusual railings for stairs in a private house. Calculation and fastening of railings for stairs: assembly steps, installation recommendations. Beautiful wrought iron stair railings
An indispensable attribute of any flight of stairs are railings and railings. The first handrails appeared in the ancient world, when they began to enclose the stairs of the Colosseum, amphitheaters and other similar buildings of that time. Nowadays, stair railings are used everywhere. However right choice railing requires certain knowledge, because for different places they must also be different. Let's look into all the nuances of this issue.
As you might guess, these products perform 2 important functions:
- provide convenience and safety during the descent or ascent;
- serve as a decorative element of the interior or exterior.
Some people may think that fences are needed only for the safety of children, the disabled or the elderly. Both may have problems with stability, especially during descent or ascent. However, even an adult healthy person needs to feel safe. Therefore, these elements are recommended to be installed on all stairs without exception, so that in case of an unforeseen situation, grab onto the railings of the fences.
In addition to providing convenience and safety, stair railings also perform a decorative function. Light or dark, with or without carvings, rounded or angular, wooden or metal, mounted on a flight of stairs or built into the wall - all this makes it possible to realize your unique design in any room. Since the first appearance, the railing for the stairs has changed significantly. If initially they were conceived as a wall that ran along a flight of stairs, then in the modern world a lot of decorative delights are used for beauty. Despite the large number of decorative variations, stair railings have a strictly defined design: Important! If there are small children at home, it is advisable to make the fence solid. As an option - an increase in the number of balusters, which will not allow the child to crawl between them. As mentioned above, there are many options for stair railings. A wide choice of design solutions is provided due to the variety of shapes, colors, mounting methods, as well as materials. Therefore, the types of stair railings should be discussed in more detail. First of all, we note that the above decor options depend on the location of the flight of stairs. Based on this, stair railings can be classified as: Advice! When trusting designers to choose a stair railing, make sure it meets safety standards and is easy to use. Often the desire for originality negatively affects practicality. The appearance, as well as the overall comfort of the flight of stairs, significantly depend on the material from which the stair railing is made. AT modern world the following models are found: Stair railing options To learn about the advantages and disadvantages of each material, you should study it in more detail. Railings for stairs made of aluminum and stainless steel gained immense popularity about 10-20 years ago. Nowadays, such products are widely used in office and commercial buildings, giving the interior a pleasant modern look. Fabrication and installation of stainless steel railings Perhaps the only drawback of stainless elements is the average resistance to mechanical stress after long-term operation. For example, after a couple of decades, a lot of small scratches appear on the surface, and the attachment points often begin to loosen. Aluminum structures are not afraid of mechanical damage. Many people prefer to install wrought iron railings on stairs. The main factor that is taken into account when choosing this material is the beauty and grace of products. Manufacture of railings by hot forging In the modern world, such products are most often found in private homes or expensive hotels. Such attention to is provided due to the prestigious appearance, as well as a number of other advantages: The only negative is, of course, the cost of work and the products themselves. Despite the wide variety of materials, wood railings are still popular. This is because people always tend to use natural products and materials. Most often, such fences are used in private homes, but you can often find wooden railings on the porch. The main and only drawback is the need to cover the products with a protective varnish every few years. For this reason, most builders of private houses for the railing on the porch prefer not to use wooden, but metal or concrete railings. The peculiarity of such products is minimalism combined with modern look. For installation glass elements resorted not only to ordinary people, but also to large corporations. In particular, in the offices of Google, Yandex, Samsung, Apple and other companies, glass railings are most often found. Despite the apparent fragility, such products have a number of positive aspects: Concrete products are not always suitable, like their natural stone counterpart. The fact is that such railings have a significant weight. And in the case of natural stone, they can also be expensive. But the strength and durability of such structures is simply excellent. That is why they are often installed on the street, since weather such railings are not terrible. If speak about natural stone, then it also emphasizes the status of the owner of the house. 
The structure of the railings on the stairs
Some railings for stairs also have a cabinet (or plug) - an element installed at the beginning and end of the flight of stairs. This product, in fact, has no practical use, performing only the role of a decorative element that aesthetically completes the railing for stairs. Varieties of stair railings
The shape of the products depends not only on the location of the span, but also on the material. For example, wooden products are more typical of the classic style - balusters in the form of columns with a massive rounded handrail. Railings for stairs made of metal are distinguished by a small handrail and balusters with patterns. Glass products are characterized by "strictness" and angular design. If everything is clear with colors (glass and wooden varieties are characterized by light colors, metal ones are dark), then with the method of fastening everything is much more interesting. The railing for the stairs can be mounted as follows:Thus, among the railings on the stairs, a wide variety of design solutions is provided.Material used
Aluminum and stainless products
The great popularity and widespread use of aluminum and stainless devices is provided due to significant advantages:Forged Products
The production of forged railings takes place according to certain technologies:wooden products
The enduring popularity of wooden varieties can be explained by the following points:glass railings
However, like other varieties, glass railings are not without drawbacks. In particular, high cost and difficult maintenance (keeping clean) - salient feature such products. Concrete and stone railings
Handrails or railings for the stairs of a country house can be made of different materials. However, for the reliability of the resulting design, their main characteristics must be taken into account.
Handrails or railings for the stairs of a country house can be made of different materials.
Different types of railings differ not only in external characteristics, but also operational qualities. Railing structures are an original decoration, and also carry a certain functional load.
Characteristics of wooden railings for stairs
Wooden railings are still very popular due to their naturalness and environmental friendliness. As a rule, such fences are mounted in private households and on the street, when arranging the porch. The advantages also include an attractive appearance, sufficient resistance to damage and a rich color gamut. The main and only drawback is the need to systematically update the lacquer coating.
Wooden railings are still very popular due to their naturalness and environmental friendliness. Reliable metal stair railings
Iron structures are durable and reliable. Many domestic consumers prefer to make railings from light metals, represented by aluminum or stainless steel. Qualitatively and correctly made metal staircase handrail is characterized by:
- long service life, reaching fifty years;
- external presentability and a prestigious, modern look;
- simple service;
- no need to stain;
- democratic value;
- rust resistance.
The main disadvantage of such structures is the average resistance to significant mechanical impacts. Among other things, the mount can become loose during long-term operation.
Budget plastic railings
Quite budgetary plastic models look very original and unusual, which are optimally suited for both outdoor use and home installation. This option has increased resistance to negative weather phenomena, easily withstands temperature changes and high humidity, and is also characterized by durability and ease of maintenance. The variety of shapes and sizes, as well as the richness of colors and shades, allows you to choose the most suitable design to the surrounding interior.
Types of stairs for a country house (video)
Criteria for choosing railings and railings for the stairs of a private house
For stairs with a height of more than half a meter, handrails or other protective elements of the fences are mandatory, which will prevent the user from falling from the open side. In a private household, it is allowed to install small stairs, no more than a meter high, which are not equipped with balustrades.
If the structures are securely fastened, and also adjacent to the wall on one or both sides, then it is enough to install simple handrails. , as well as being built using a special technology in rooms where small children, people of retirement age and people with disabilities live. If the width of the stairs exceeds one and a half meters, then the handrails must be installed on both sides.
The safest is a fence height of 0.9 m, and if the standard distance between flights of stairs is 20 cm or more, it is necessary to focus on a fence height of a meter or more. Handrails must be located with a minimum distance of 50 mm from the walls.
The main requirements for such products are sufficient reliability and stability, as well as durable filling. For safety reasons, it is best to give preference to full filling or installation of products in the form of frequent columns.
Handrail for stairs with an unusual design
Individual and original decor of modern staircase designs can be developed independently or custom-made by experienced designers.
Original handrail options for stairs
Stair railings can have an unusual and very original design, including polycarbonate structures with handrails made from ordinary tree branches. Thick rope or rope handrails fit perfectly into the design of suburban households, if the interior is presented in a marine or urban style.
The following original options are especially popular:
- Madrone Sar Nandrail in the form of a continuous line on the basis of light wood and with contrast brackets;
- metal clamps made of metal, neatly supporting a straight and smooth oak beam;
- a combination of metal chrome and glass sheet with a wooden border;
- alternation of horizontal or vertical wooden and metal lines;
- parallel-mounted steel pipes with smooth bends at the corners;
- metal handrails combined with Art Deco horizontal stripes.
Metals belong to the category of sufficiently ductile materials, which makes it possible to diversify traditional design artistic elements in the form of floral ornaments or geometric shapes.
Stair railings can have an unusual and very original design. Illuminated stair railing
LED elements look particularly advantageous against the background dark walls. Most often, electrical power is supplied directly to the supports. The most popular and widely used designs are:
- stainless railings and railings with lighting. Illuminated basic models are made of polished and brushed steel, often with a satin finish. Built-in LED strip lighting is interrupted at corners and power consumption is 4.8 W/m. At the end, a special stainless steel plug is installed;
- protections on a bearing glass with the established illumination. Base models are based on transparent glass with euroedge and stainless steel of various grades with a mirror, polished or matt surface. The basic models use an LED strip with a power not exceeding 4.8 W/m. Diffused white or colored illumination is located inside the carrier profile or at the bottom of the product;
- stainless railings and railings with glass and installed lighting. Tubular basic models are fixed on special remote holders, and the filling consists of 0.6 cm tempered glass, which is fixed on molded clamp holders. The built-in backlight is represented by an LED strip, interrupted at the corners. The power consumption does not exceed 4.8 W/m. The end of the handrail is a special decorative plug.
AT last years when arranging stair structures, wall handrails with LED illumination with a power of 4.8 W / m are increasingly used. The handrail itself and fittings in the basic models are made using polished super mirror stainless grooved pipes.
In recent years, when arranging stair structures, wall handrails with LED illumination with a power of 4.8 W / m are increasingly used. Beautiful wrought iron stair railings
Less in demand among a wide range of domestic consumers are exclusive and rather expensive forged products. All designs made by cold forging are characterized by the "twisting" of metal rods into bizarre and openwork shapes, most often used on outdoor stairs and porch railings. Hot forging is used to create products with a unique, rather complex shape.
As a rule, the most expensive products, made according to individual sketches and to order, are installed in private households, multi-storey cottages or in very prestigious hotel complexes. Increased attention to forged railings and staircase elements is quite natural and is explained not only by the rich appearance, but also by a number of other advantages, including:
- high resistance to adverse external influences. High-quality forged products perfectly tolerate temperature changes, do not change their original characteristics under the influence of rain, snow and mechanical damage;
- guaranteed long service life. Forged products made in compliance with the technology can be used without problems for a century, and sometimes more;
- individual style and original design, due to the peculiarities of manufacturing technology.
The only, but very noticeable disadvantage forged products, today is the cost of the work performed, and, accordingly, the finished handrails themselves.
Gallery: railings for the stairs of a country house (56 photos)
A variety of decorative railings for stairs
Railings can be represented by handrails, balusters, posts and other barriers designed for the safe operation of the ladder structure and acting as a support for comfortable movement. Among other things, such elements perform decorative functions and are an original addition to the design of the room.
Glass or mosaic sheets installed in the middle of the fence as filling look very advantageous in a modern interior, which are most often fixed with special holders. different sizes and forms. Despite the apparent fragility, Such products have a number of advantages, presented:
- ease of installation;
- a variety of types, including models with increased frost resistance, fire resistance, excellent soundproofing and explosion resistance, as well as bulletproof qualities;
- long service life exceeding half a century;
- ease of dismantling and ease of local replacement of a damaged element.
The main, most tangible disadvantages of exclusive glass models are represented by high cost. finished product, as well as the complexity of maintenance.
How to install a railing with your own hands (video)
Instructions for making handrails for wooden stairs with your own hands
As a rule, wood is used exclusively for the manufacture hard rock or some expensive varieties such as beech, oak, ash, merbau, teak and iroko. There are many different types of fences:
- use of bars with different section, as well as a combination of square, rectangular and round elements;
- filling with thin bars located in different directions or in the “crosswise” position;
- the arrangement of elements with different steps, but not violating the indicators overall sustainability the whole structure;
- the use of curly elements, balusters or supports with various curvilinear shapes.
Allowed independent construction structures made of soft hardwood, but in this case it must be remembered that such a product can give significant shrinkage.
For the manufacture of stairs and railings, only hardwood is used. How should the railing of the stairs of a country house be strengthened
If a wooden summer cottage staircase is being mounted, then a special base beam must be made and installed under it. Free handrails, placed above the free stair bowstring, fix flat and rod structural elements. Installation is carried out using dowels, special adhesives and trunnions.
On the initial stage it is required to install extreme racks that serve as the basis of the structure. A guide marking lacing is fixed on the racks, according to which the handrail is installed and fixed. Then the distance between the installed balusters is marked, and the elements are attached to the steps or the bowstring. For fixing balusters, galvanized self-tapping screws are most often used, planted on an adhesive.
How to assemble a staircase from wooden elements (video)
Stairs made of materials other than wood require special attention. It is important to note that, in accordance with SNiP, when tightening parts metal fences, only the hot welding method can be used, by means of metal plates specially built into the concrete base.
Attention, only TODAY!
November 2016The ladder is important element country or private house, providing comfortable movement between floors. Often the staircase is a decoration of the room, which affects the design of the whole house. For maximum convenience and safety, stairs are equipped with railings, which are the most visible and beautiful part of the structure. Railings for stairs are made from different materials - from metal to glass, and each of them has pros and cons. Materials can be combined to create structures with interesting design. The manufacture and installation of beautiful and reliable railings made of wood or other materials is not an easy task, which is usually trusted to professionals. However, if you wish, you can do everything yourself, including planning the design of the room.
Wooden staircase in a private house
Often people have no idea what the differences between railings and handrails are, considering these words as synonyms. This often results in misunderstandings between experts and ordinary people. A stair railing is a structure with vertical elements and handrails. Accordingly, the handrail is only top part railings. Exist different kinds such structures, differing both in material and shape.
materials
There are different options. Stairs, railings and handrails can be made from one material, or from two, three or more. Metal, glass, wood, PVC, stone - in a private house, these materials can be combined as you like. It is only important to take into account their strengths and weak sides in the selection process. For example, glass inserts between steps and handrails will look beautiful and stylish. If you need reliability, then choose metal structures or balusters from other materials (PVC, stone, wood).
Railing for stairs made of metal and wood
The primary factor in the choice of material is usually the interior of the house. Handrails for stairs made of glass and PVC are perfect for Art Nouveau design. In rooms with more classic decoration, railings made of wood, metal or PVC with wood stylization will look better. However, unusual design with unexpected details is quite a popular trend. The design of such railings can be bright and catchy.
Railings for stairs made of metal and glass 
Glass railing for stairs
Wood
Wooden railings are a real decoration of the room. Wood goes well with most interior styles. This is the perfect option for a country house. Among the advantages of this material are the following:
- wood is a widely used building material and can be easily obtained even in small shops. settlements(different kinds);
- low cost of most types of wood;
- environmental friendliness of this fence;
- it is easy to process and cut out even the smallest elements and details;
- nice texture ( the best way for handrails).
Wooden railing for stairs
Wood also has disadvantages, which include fragility, unsuitability for outdoor use (susceptibility to changes in temperature, humidity, etc.) and the solid cost of valuable wood species (such as oak, cherry, beech, walnut, etc.). .d.). The street railing of the stairs of a country house would be better made from a different material. However given material remains the most versatile among analogues: wooden railings can be given any shape that will fit into even the most unusual interior. Decorative details are easily added.
Beautiful wooden railing for stairs 
Black and white wooden railing for stairs
Metal
The second most popular railing material is metal. It is almost as versatile as wood, yet difficult to work with. To independently make a railing for stairs from this material will only be possible for experienced people special tools. Usually this work is entrusted to professionals. The design with forged details will fit into any interior. Unusual solutions better to discuss with the designer.
Forged metal railing for stairs
It is believed that the metal is unpleasant to the touch, it is not at all suitable for handrails, and only fences for the site are made from it. However, this is not so: a perfectly smooth cool surface causes only positive sensations when in contact with the hand. However, on metal constructions You can always put handrails made of wood. The following advantages of metal railings can be distinguished:
- versatility in terms of design and placement: forged railings for stairs can be made in any style and put them even on the street;
- affordable price (cheaper than some wooden options);
- durability and strength;
- you can create stylish patterns;
- well combined with structures made of other materials (for example, with glass inserts).
The price of such railings will depend on the complexity of the shape and ornament. Exquisite designs containing original forged elements can be quite expensive. Standard wood and steel details can be replaced with modern style glass inserts.
Metal railing for spiral staircase 
Metal and wood railing for stairs
PVC and glass
Plastic and glass fit perfectly into modern interiors. PVC is usually used to create railings and handrails of complex and unusual shapes, since this material is really very plastic. glass panels are mainly used as beautiful additions to interiors where modern design prevails.
PVC and metal railing for stairs
These materials are a little more limited in stylistic terms, and they will look out of place in a classic-looking room. However, PVC handrails can imitate wood texture and color. The material can look like valuable types of wood, which will add sophistication to the interior. But for a country house it is better to choose a real tree. The rather low cost of this material will be another of its important advantages. PVC is great for original interiors. It is a flexible material that is often used for the handrails of spiral staircases.
Glass railing for stairs
Glass railings for stairs made of metal and wood
Location of structures
When building stairs and railings, it is important to keep safety in mind. If there are children in the house, then the railings should be as strong as possible, and the balusters should be placed close to each other. In addition, the following requirements must be met:
- if the staircase is narrow, then there must be railings or railings on at least one side, even when the staircase is limited by walls;
- on a wide staircase, it is necessary to install handrails on both sides;
- the optimal height of the railing is from 90 to 120 cm (other options are possible).
Wooden stair railing
Don't forget about turn and end bollards, which must be installed at the beginning and end of the stairs, as well as at the turning points. It's good when the cabinets look like balusters, but they should be much more powerful and durable. The surface of the handrail must be perfectly smooth so that there are no scratches or splinters on the hands. If there are children in a private house, then the rest of the elements should be made as smooth as possible.
Unusual staircase in the interior of the house
Beautiful wood and metal railings for stairs
Handrail installation
Making all the details yourself is a difficult task, but quite feasible. Even from metal, with due patience, you can create a beautiful and durable design. Still, the railing for the stairs is much smaller than the street railings, and it will not take much time. It is only necessary to strictly follow the instructions and carry out the work in stages:
- before starting work, you need to carefully calculate everything, taking into account even the most insignificant at first glance factors (the presence of children and the elderly, interior design, etc.);
- markings should be made on the walls and surfaces on which structural elements will be fixed (railings, end and swivel pedestals, balusters);
- upon completion of the above work, you can proceed to the installation of structures.
Modern railings made of glass, wood and metal for stairs
Remember that such work will take a lot of time. If you want to install wrought iron railings for stairs, you will need certain handling skills. welding machine. So if you are not confident in your abilities or do not want to spend too much time on fasteners and patterns, then it is best to call a specialist.
Modern glass railings for stairs
Wooden balusters should not be installed with nails. It is better to use self-tapping screws or special glue. When making elements with your own hands, do everything with a margin: according to statistics, about 10% of parts turn out to be defective. For processing wooden railings, it is recommended to use parquet varnish, which will preserve the beauty of the natural texture of the material. Lacquered fences are not only beautiful, but also pleasant to the touch.
modern wooden stair railing
If you do not have experience and relevant skills, then you should not plan complex metal projects. To implement such work, you may need a pneumatic hammer and a horn. However, working with metal in itself requires skill and experience. to make wooden structures way easier. Therefore, at least consult a professional and carefully study the theoretical side of the issue. And if you are interested in modern designs with curved PVC parts or glass inserts, then it is better to immediately entrust such work to the masters.
Modern glass and wood railings for stairs
How many times have you walked up and down stairs without paying much attention to your surroundings? But, in fact, the design of this part of the house is no less important than everything else.
That is why more and more homeowners are choosing stylish stair railings, because they are not only designed to protect or support, but help to create a coherent image of your home. It could be lovely element home decor.
Suppose you have modern house made in a minimalist style. Then you should choose handrails made of metal and glass, or wooden, which will go well with the same floors. The possibilities are endless.
Wooden
This is a classic style in the interior, it is often chosen in addition to other elements made of this material. hallmark handrails suggested below is simplicity.
The Madrone Cap Handrail is an unbroken line of light wood with braces that add contrast (from Five Twenty Two Industries via Houzz).
The next simple option is solid oak railings. In the photo, you can see the metal clips that neatly support the straight, smooth timber. Here, the elegant form of the piece speaks for itself. [From NYC Royal Stairs Inc.]
Wood can add both a touch of tradition and look surprisingly modern, especially when paired with materials such as metal and glass (from John Maniscalco Architecture via Houzz)
Made of glass and wood
Wooden railings bring a sense of warmth to any space, despite being complemented by cool chrome steel and glass [Design: John Maniscalco Architecture via Houzz]
The golden glow emitted by hardwoods is also always associated with warmth, they help create comfort in the house (from BMF Construction via Houzz).
Perfect harmony occurs when the wood of the railing and the staircase itself are harmoniously combined (from Builders MD).
The abundance of horizontal metal lines, accentuated by a single wooden one, directs and enhances the sense of movement in the space. [Design: David Neiman Architects via Houzz]
The angles, lines and curves of the grand commercial staircase showcase a range of modern building materials (from Virginia Railing Gates). The choice of material for decorating is great.
Vertical lines in handrails can be just as interesting as horizontal lines (from Houzz)
The solid ladder shown in the following image is made in rustic style, but overall the design looks quite modern (from Peter A. Sellar - Photographer via Houzz).
Wooden handrails can be painted in shades to match. color scheme your house. The black and white railing in the photo below is a great addition to this abstract triptych (from Myers Design Inc. via Houzz).
metal
This plastic material allows you to create a variety of effects and highlights, such as the industrial blend in the interior, shown below. Rounded segments soften and add personality to hard railings [Design: Lucid Interior Design via Houzz]
Many stairs have parallel lines steel pipes as railings, curving around corners (from Creative Spaciz via Houzz).
Metal handrails with horizontal stripes match perfectly with the Art Deco style [Design: Martin Fenlon Architecture via Houszz]
The stunning shape of the spiral staircase gives an equally stunning view. The following image proves that steel railings can be bent as needed (from Segev Photography via Houzz).
In fact, a well-designed staircase can play important role in creating an architectural composition in the house. Notice how the metal handrails in the photo below provide a striking contrast to the wooden steps(from Royal Stairs Inc.).
The most popular choice for stair framing is light brushed metal, while dark color it makes itself even clearer, for example against a white wall (from Cary Bernstein Architect via Houzz).
Want to create an interesting combination? Try to combine two tones - black handrail and main supports, very strong, quite massive and thin horizontal light strings that add visual lightness (from Spore Design via Houzz). Luxurious Design the interior is simply provided for you!
Metal, as we have already noted, is a rather plastic material, which allows you to add various artistic elements to the design, including stairwells.
Below you can see how the wavy lines create the shape of a leaf, folding into a vegetal ornament, very embellishing the object of our interest (from NYC Royal Stairs Inc.).
A sculpted railing will look great against a bright wall, such as yellow and green (from Chelsea Atelier Architect, PC via Houzz).
When one of the walls staircase is glass, all you need is a perfectly simple steel handrail (photo by Matthew Millman, by Redmond Aldrich Design via Houzz).
Similar to the previous option, metal rod repeats on the wall the curve defined by the glass railing on the opposite side (from CS Photography via Houzz).
Decorate the interior simple handrails With a zigzag design, they represent simplicity at its finest [From Elfish Investments]
An interesting combination is obtained when you take a simple stainless steel railing and complement wooden detail on the wall [Design: Life of an Architect]
And we complete our collection with an amazing object created from a steel frame pattern and glass steps (from NYC Royal Stairs Inc.).
Unusual
If you are looking for something special that will make your interior sophisticated, then the next section is for you! LED handrails set against dark walls will blow your mind (by Inhabit)!
How do they shine? Where are the outlets and cords? These questions arise for anyone who sees it. In fact, everything is simple - the power supply is connected directly to the supports.
These amazing handrails create a very special atmosphere, thanks to the fact that the color of the radiation can be chosen. In addition, they are very functional, because there is no need for additional lighting in such rather dark places as stairwells.
Another interesting option These are all glass railings. They are very beautiful and light, transparent from top to bottom. [From Nancy A. Fink]
If you want to create a retro style in the interior - use brass. It can look great both in commercial spaces and at home, especially if you want to “age” the interior a little (from Virginia Railing & Gates).
street
We can't forget that handrails are a necessity for open spaces, for safety reasons, not to mention an aesthetic function.
They can really highlight architectural ensemble Houses. An example of this is the following image (from Cornerstoun Group Architects via Houzz).
Metal railings can create a striking contrast to a decked porch and staircase. wooden planks(from Mark English Architects via Houzz).
Shiny chrome handrails with horizontal parallel lines are often used for framing flights of stairs made of cement (from NYC Royal Stairs Inc.).
Often, railings are used on balconies and other elevated spaces to ensure the safety of people who may be there. However, while focusing on functionality, do not forget about style (from NYC Royal Stairs Inc.).
We finish our selection with handrails framing the platform that is located indoors. There is indeed a need for them. The premises are very spacious and, combined with high ceilings, this requires the adoption of certain security measures (from Elfish Investments).
So, whichever railing you choose, make sure it fits in with your style. And don't forget that sometimes the most simple solutions are the most effective!
Railings are an indispensable attribute of the staircase design. They perform the function of a protective element that ensures the safety of movement along the span. Railings are distinguished by a variety of shapes and materials, they can be both simple in appearance and made in an unusual, original style. This enclosing element can be a bright design addition to the interior, become a chic decoration for any home.
Having studied various photos of the railings for stairs, you can be convinced of the variability of these structural elements and choose the option that is most suitable for your case.
It is easy to make handrails for stairs with your own hands. Let's try to figure out how to independently make protective elements for a ladder structure, what material is better to use, where to start the installation process.
Material selection
First you need to figure out what materials the railings for the flight of stairs are made of. The most popular are the following enclosing elements.
Aluminum. If you prefer railings made of aluminum, then it will be difficult to make them yourself. Basically, these products are sold in ready-made and all you have to do is correct calculations, buy required amount enclosing elements, assemble them with your own hands and get acquainted with step by step installation railing for stairs.
Chromed. They, like the previous ones, are sold in construction stores in ready-made form, therefore, to install them on your own, you must perform the steps listed above.
Forged. Such railings look incredibly beautiful and interesting, but making forged railings at home is a rather difficult task.
Hot forging can only be carried out in a specially equipped room, as for cold forging, it can be done at home, but you need to know the basics of this process and have everything in your arsenal necessary tools.
Made from stainless steel. Such railings are very wear-resistant, strong and reliable, however, in order to install them yourself, you will need the skills of welding and cutting metal.
Wooden. This is the most popular material used in the manufacture and installation of handrails on their own. Let us dwell in more detail on the wooden enclosing elements, we will provide the reader brief instructions how to make wood railings.
Wooden stair railings
Wood has long been used to create railings, the main advantages of this material: wood allows you to create a fence of any stylistic orientation, shape, with interesting carvings, ornaments. In addition, there are many options for decorating wooden fences, they can be painted, varnished, etc.
For novice craftsmen, it is better to start with such railings, in the absence of experience in carpentry, you can choose a simple design, the tree, due to its texture, will in any case look interesting and aesthetically pleasing in the interior.
Let's try to figure out how to properly make a railing for a wooden staircase. First, decide on the type of tree, it will be beech, pine, oak, birch or something else. The costs incurred for manufacturing, the quality of the railing, their resistance to sudden changes in temperature, susceptibility to decay, and ease of processing will depend on the selected breed.
Secondly, familiarize yourself with the main parts of stair railings. The following elements will be present in any railing: handrails, racks, balusters, cabinets.
Particular attention should be paid to balusters, because the appearance of the flight of stairs will depend on them. You can make them in the form of neat columns, if it is possible to use metalwork equipment - carve various patterns and ornaments on the surface.
Hand cutting can turn these structural elements In a real work of art, the scope for creativity is incredibly wide, craftsmen carve figures of people, animals and other incredible compositions from the bars.
After preparing all necessary elements the question arises, how to install the railing on the stairs. Wooden curly posts can be attached directly to the steps, using grooves or metal studs, while flat balusters (presented in the form of thin boards) are best mounted on a special beam located 10 centimeters above the bowstring.
In this case, the railing handrail, timber and pedestals will form a frame, where flat balusters must be inserted. The distance between the crossbars in both cases should be no more than 15 centimeters.
So in in general terms looks like the process of adding a flight of stairs with enclosing elements. Having decided to install the railing, evaluate your strengths, choose the right project, calculate how many materials you will need for work, prepare the necessary tools and start this interesting activity.
Photo of railings for stairs
