How to care for a glass hob. Proper care and cleaning products for hobs. What means and tools to use for cleaning

Electric stove maintenance.

Features of cleaning glass ceramics

Glass ceramics do not like aluminum, sugar and plastic.
Do not clean glass ceramics with a knife, brush, steel wool or abrasive cleaners.

To care for glass-ceramic surfaces, there are special cleaning products and tools - scrapers. Despite the cost, the effect of using these funds should also be noted. The glass-ceramic surface will be much easier to keep perfectly clean, as the product not only removes limescale, food residue and grease stains, but also creates a thin protective silicone film. The film prevents the build-up of food residues and grease, facilitates the cleaning process and protects the surface from liquids with a high sugar content.

AEG recommends: “First use a scraper to remove food debris. Aluminum foil, melted plastic and burnt sugar are best removed while the surface is warm. If this happens, you should warm up the stove again so that the contaminants melt. Then it is easier to scrape them off with a scraper. Then the surface must be allowed to cool and apply a special glass-ceramic cleaner to it, gently rubbing it with a soft cloth or paper towel. The surface is then carefully cleaned. wet towel and wipe dry.

At first glance, everything is simple and clear. But there are some nuances that should be considered in some cases.

Do not wipe the surface with a sponge for washing dishes, because. traces of detergent or grease may remain on it, when the stove is turned on, they burn out, which leads to discoloration of the surface. The glass ceramics around the burners can be cleaned with soap and water using a soft, clean cloth.

Splashes of grease, limescale, water marks and stains that change the color of the surface are removed with steel cleaners or special compositions for the care of glass ceramics. Detergents should only be applied to the completely cooled panel. After cleaning, they must be completely removed from the surface being cleaned, as they can have a corrosive effect on the glass-ceramic coating.

Limescale can be removed with a mild vinegar solution. If used for care glass-ceramic surface dishwashing liquid, bluish stains may remain on it. They do not affect the operation of the device, but are not always removed even with special compounds.

Stain removers and oven sprays should not be used to clean glass ceramics.

Ardo experts believe that glass ceramics can be cleaned with glass cleaners.

Avoid contact with the hob particulate matter- for example, grains of sand. They can damage the glass-ceramic surface.

The burners must always be kept dry, wet pans or splashes of salt water have a negative effect on glass ceramics.

What can be used from improvised means for cleaning glass ceramics? The owners recommend:

Baking soda is considered a good tool for cleaning the hob. Wet powder is applied to the surface with a damp cloth and perfectly removes dirt.

To create a protective film, after washing the glass ceramics, wipe the panel with a soft cloth moistened with a small amount of vegetable oil.

When washing the oven, be careful not to damage the rubber seal. It can be removed by removing the brackets from the holes.

So that the walls of the oven in the gas stove do not rust, you need to rub it with fine table salt every time after use.

Glass ceramic cleaning.

On the glass-ceramic stove, it is impossible to leave the "escaped" liquid until it dries or burns. Wipe it off with a sponge or cloth as soon as possible, even if the surface is still hot. Remove dried dirt with a special scraper, and if it is not there, with a regular disposable razor.

Do not wash the glass-ceramic hob with detergents containing abrasives. Dry or dirty rags can do a bad job. Any glass cleaner is best suited for cleaning glass ceramics.

glass ceramic hob

And special attention should be paid to the glass-ceramic stove:
firstly, it does not tolerate sugar - sugar smudges (for example, when cooking jam) can completely ruin the stove;
secondly, in no case should you use abrasive cleaning products - the surface will instantly lose its smoothness and shine;
thirdly, splashing water on a hot stove can greatly damage the surface;
fourthly, you should not put wet dishes on a heated stove - there will be hard-to-remove traces.

Glass ceramic cleaning:

Special scrapers for such plates, and no scratching with a knife to scrape off dried residues;
- special wipes or paper towels, but no dirty wet rags or wet sponges for washing dishes;
- dishwashing detergents leave a "gasoline" coating, so it is better to use specialized means for glass ceramics.

Electric stove maintenance.

Everyone who deals with cooking knows that it inevitably ends up on the stove. Therefore, it is better to clean the electric stove daily, then cleaning will not be difficult. If the plate is not washed for several days, food residues burn to its surface and form a dense, hard-to-wash off crust. Clear her by conventional means already difficult, but if you use for this metal objects and sandpaper may damage the enamel.
The first time the stove is washed with a warm solution of baking soda or laundry soap immediately after it is installed. This is necessary to remove the grease that protects the burners and stove parts from corrosion. Then all parts of the plate are wiped dry. After that, the stove must be warmed up in order for the lubrication of the internal parts to burn out. The burners are turned on at the 2nd - 3rd stage, and the thermostat of the cabinet is set to 200 "C. The stove is heated for 30 - 40 minutes, while it is necessary to open the window in the kitchen and close the door tightly.
Most often include electric burners with a power of 1500 watts. Because of this, they fail more often than others. Burners with a power of 1000 W last 3-4 times longer, as they are switched on less often. Given this circumstance, you need to think about which burner to turn on. If dinner is being prepared, it is better to put the pan on a small burner, while only a few minutes are lost on cooking, since maximum power needed only when boiling. But less electricity is consumed, and a large burner will last longer.
Burner bodies are made of cast iron, which is quite fragile and requires careful handling. When heated, thermal stresses arise in the body of the burners, which are greater, the higher the temperature. They lead to cracking of the burners. To prevent this from happening, the following recommendations must be observed.

Do not turn on the burner at full power without dishes! If, for any reason, the hotplate has been switched on and has become red hot, it must be immediately switched off and allowed to cool down. Do not attempt to cool the burners with pots of cold water.
Do not place cookware with a wet bottom on the burners - this causes intense corrosion of the burner. At a pot with a wet bottom, the water vapor will lift the pot, and it will bounce and make a bang sound. Cookware with a smaller diameter and an uneven bottom causes the burner to overheat, which reduces its service life and increases energy consumption.
The surface of the burners of Yugoslav and some other stoves is coated with an anti-corrosion compound, so they cannot be cleaned with metal brushes.
It is strictly forbidden to use an electric stove as a heating device.
Organic residues cause corrosion and create a gap between the burner and the bottom of the cookware. Therefore, as the burners get dirty, they must be cleaned, carefully removing these residues.

Before cleaning, the switch handles are set to the zero position and the stove is disconnected from the mains. The surface of the burners is wiped with a sponge dipped in soapy water. If you need to remove badly burnt food residues, use a wooden spatula or a wire washcloth. The washed burner is wiped dry and for final drying it is turned on for 1-2 minutes.
It is recommended to wipe the surface of the burners from time to time with a cloth slightly moistened with vegetable oil. This protects the burners from corrosion. When preserving electric stoves (for example, in a summer house for the winter), the burners are covered with a thicker layer of lubricant.
chrome plated support ring, with which the burner is attached, over time from exposure high temperature turns yellow. There is no need to try to clean the yellowness, as it results from an irreversible chemical change in the coating, and cleaning the ring can only damage it.
Since food is cooked in the oven no more than 1 - 2 times a week, it is advisable to wash it after each use.
For cleaning ovens and other surfaces covered with enamel (hobs and front panel), it is not recommended to use powder detergents (adsorption-abrasive). Most suitable for these purposes laundry soap, warm solution baking soda or a mixture thereof (10-15 g of soda, 10 -
15 g of soap per 1 liter hot water). You can use liquid (flotation) detergents.

If the cabinet is heavily soiled, it should be turned on for maximum temperature and warm up for 40 - 50 minutes, while part of the food residue will burn.
Do not put on the bottom of the cabinet aluminum foil so that it doesn't get dirty. This can damage the enamel.
To prevent the baking sheet from warping and cracking the enamel, it must not be placed hot under cold water.

Cleaning pancake burners

If for cleaning solid cast iron burners use water, the metal will change color and form unsightly rust spots. Instead, heat the burner and turn off the stove. Heating will char what has fallen on the burner, which will facilitate its removal with a dry washcloth pad made of synthetic sponge after the burner has completely cooled. Never use wire wool.

Refreshing the surface of the burner

To restore the uniform dark gray color of the burners, use a proprietary product that, in addition to refreshing the appearance, will also protect the metal. After cleaning the burner, evenly apply the reducing agent to the lukewarm burner, and then turn it to the middle position to consolidate the effect.
Alternatively, put a few drops of frying oil on a cold burner and rub evenly with newspaper. Remove excess oil with a clean newspaper. When using the stove, the protective layer quickly disappears, so the oil should be applied every time you clean the burners.

Tips for young housewives.

Remove the dirt remaining in the grooves of the heating discs of the electric stove by sprinkling it with a small amount of baking powder, then wiping it with a damp sponge and washing it off with clean water.
If you have used the oven 2-3 times and never washed it, prepare special composition to soften stains. Finely grate laundry soap, soak it in water and add soda. Wipe the walls of the oven with the resulting gruel.
If something escapes onto the stove while cooking, immediately wipe the stove with a drop of vinegar on it to reduce the burning smell.
To clean the microwave, it will be enough to put a deep plate of water in it for a few minutes. The hot steam will soak up any accumulated dirt and grease. You just have to wipe inner surface sponge with detergent solution and wipe the oven dry.
Splashes of hard water are left on the glazed surface tiles hard-to-wash marks. To quickly get rid of them, wipe the tiled surface with a sponge moistened with a weak solution. ammonia, and then rub to a shine with a dry soft cloth. how to remove rust from a car, refrigerator, stove, etc.
Part 15 -
Part 16 - Caring for an electric stove. Features of cleaning glass ceramics
Part 17 -
Part 18 -
...
Part 25 -
Part 26 -
Part 27 -

All manufacturers recommend cleaning glass-ceramic hob only with soap solutions or special products for glass-ceramics (in the form of creams, pastes or sprays). The latter are good in that they not only clean the surface of the plate, but also leave a dirt-repellent film on it and add shine.

But what to do if a special cleaner is not at hand or it simply cannot wash off stubborn dirt? In this case, the products from your first aid kit or kitchen cabinet will help you out, as well as our tips for choosing more effective products for glass ceramics.

Method 1. How to care for a glass-ceramic stove every day

This method is the only one that is officially allowed to be used by all manufacturers. glass-ceramic plates for daily cleaning.

Instruction:

After cooking (or in the process), while the stove is still hot, carefully remove burnt liquids and food residues with a scraper.

When the stove has cooled down (!), treat the dirty places with a soapy solution (for example, dishwashing liquid) and rub them with a sponge that is not too hard. You can also wash the stove with a wet sponge and laundry soap.

Remove stubborn stains with a special paste or cream for glass ceramics.
Wipe the stove clean and dry, removing the remains of the product itself.

Soap solution or foam cap from it can be left on the stove for 20-40 minutes. The main thing is that the liquid does not leak outside the plate.
The main tool for cleaning a glass-ceramic hob is a glass scraper. How to use it? Position the scraper at an acute angle to the surface of the plate and simply move it back and forth.

Method 2. How to clean a glass-ceramic stove with soda

We want to warn you right away: all manufacturers prohibit the use of soda for washing glass ceramics because of its abrasive properties (micro-scratches remain on the surface, because of which the shine is somewhat lost). However, as practice shows, significant harm soda does not bring, and most users use it to wash glass ceramics regularly. If your stove is very dirty and you don't have anything handy, you can try this cleaning method.

Due to its alkaline properties, it copes well with old soot, dirt and grease

Instruction:

Sprinkle baking soda all over the stovetop.
In a small bowl, prepare a solution of hot water and dishwashing liquid.
Wet a towel thoroughly with soapy water and completely cover the stove with it as shown in the photo.

Leave the towel on for 15-30 minutes to loosen dirt.
Rub the surface of the plate with the same towel, using the remaining soda as a household item against soot and dirt.
Rinse thoroughly and wipe the glass ceramics clean and dry. If desired, use 9% vinegar to remove baking soda residue more quickly.

Instead of one large towel, you can use two small ones.
The towel should be wet enough to dissolve the baking soda and wet the surface, but not so wet that puddles form and water runs off the stove.
This method of cleaning can be used immediately after method No. 3 (see below) - this will make cleaning even more effective.
Particularly stubborn dirt can be removed with soda paste (soda + water in a ratio of 1:1). In this video you can see how to clean a glass ceramic hob with baking soda paste.

Method 3. How to wash a glass-ceramic stove with 9% vinegar

Vinegar is an excellent cleaner for cleaning limescale and grease on glass-ceramic stovetops. Yes, it is no more effective than dishwashing liquid or a regular spray for cleaning glass ceramics, but it is always at hand and inexpensive.

When the stove is cool, spray or soak the dirt with 9% table vinegar, wipe the stove with a damp cloth to remove the dirt.
Wipe the hob clean and dry.

Method 4. How to clean a glass-ceramic stove with toothpaste

Whitening toothpastes contain fine and delicate abrasive particles that can remove burn, dirt and grease. Just apply the paste to the dirty areas, rub them with a sponge and rinse thoroughly to remove any remaining toothpaste.

Method 5. Cleaning the stove with a glass cleaner

An ammonia-based glass cleaner removes grease and dirt from the glass-ceramic hob well, and also restores its shine.

Instruction:

Spray glass cleaner on the stove and wipe with a cloth or a moderately hard sponge.
Wipe the hob with a damp microfiber cloth.

Method 6. Removing difficult stains with a melamine sponge

A melamine sponge can easily and quickly clean glass ceramics, but it must be used carefully. Before using it, we recommend that you familiarize yourself with the contraindications and properties of the product.

Instruction:

Spray on the stove soap solution or glass cleaner.
Wipe local dirt with a melamine sponge.
Thoroughly rinse off the remaining melamine sponge, wash the entire surface of the plate with soapy water.

Method 7. How to restore the shine of glass ceramic and protect it from future contamination

For this purpose there is special means to repair glass ceramics, but you can use petroleum jelly or ordinary baby oil instead.

Instruction:

Apply to a clean, washed surface. thin layer oil or petroleum jelly and rub it in small circular motions with a soft cloth.

In departments household chemicals any store you can find cleaning products for glass ceramics like Cilit Bang, Sanita, Shumanit and others. They are good because they are sold everywhere and are inexpensive (relatively), but they are much less effective than professional glass ceramic cleaners. However, they are still useful to have in your arsenal - for daily cleaning and removal of light pollution.

However, if you want to make maintaining your glass ceramic hob as easy as possible or to clean a very worn glass ceramic hob, then we recommend purchasing professional tool from the manufacturer (not necessarily the manufacturer of your stove). The price of any professional cleaner is high (from 500 rubles), but if you try to clean the stove with it at least once, you will not be able to refuse it.

So, for example, very effective means produce Electrolux, Indesit, Miele, Korting.

You can buy glass ceramic cleaners in hypermarkets and online stores of household appliances (M.Video, MediaMarkt, etc.).

In the video you can see an overview of the Electrolux glass ceramic cleaner.

Sprays are convenient to use to remove grease and dirt from the entire surface of the glass-ceramic stove, and pastes and creams come to the rescue when you need to remove especially persistent local dirt around the burners.
Products containing glycerin or silicone can restore the shine of the glass ceramic hob and make future cleaning easier.

Try to clean the hob immediately after each use: first with a scraper while the hob is hot, then wash with the product after the surface has completely cooled down. Particularly quick to remove: melted plastic, polyethylene film, products containing sugar, such as jam or caramel.

To remove hardened melted plastic, it must be melted again and collected with a scraper.

Do not use harsh cleaners such as oven cleaner, bleach, clog cleaner, etc. From them, blue spots may appear on the stove, which are unlikely to be eliminated.
Always use pots and pans with clean bottoms.
It is undesirable to use utensils made of aluminum and copper, as well as enameled utensils, as they leave marks that are difficult, and sometimes simply impossible, to remove.
Do not use abrasive products, hard brushes or sponges.
Keep in mind that the scraper blade needs to be changed periodically. One blade is enough for 8-12 months.
Do not use table knives or any other sharp objects. What can temporarily replace the scraper? For removing fresh pollution A silicone spatula works great.
After washing the glass-ceramic hob, wipe it dry to prevent limescale and streaks from appearing on it.

Manufacturers of kitchen appliances constantly surprise their fans with new ones. technological developments. Not so long ago, models of stoves with glass-ceramic surfaces have gained popularity. new material showed up with best sides in the most different aspects operation - from safety to heating efficiency. But not the most pleasant nuances of caring for him were also quickly discovered. How to clean This is one of the key issues to consider when buying these models, as standard maintenance methods are not enough in this case.

Basic cleaning supplies

Most reliable way cleaning involves the use of products recommended by the manufacturers themselves. Usually they also produce devices for the care of glass ceramics. Cleaning kits include two main components - the detergent itself and the scraper.

As for drugs, they are usually supplied in 500 ml vials. At the same time, this volume is enough for a long time, so you should not stock up on additional mixtures. This glass ceramic hob cleaner is specially formulated to remove lime deposits, food residues and grease stains without harming the surface. Moreover, some means protective covering in the form of a silicone film. In turn, the scraper can be made of plastic or metal. The choice between these materials is not fundamental, since in this case there are no special requirements for the reliability of the device. Another thing is that metal is more durable, and plastic is lighter and more practical.

Folk recipes

If for one reason or another there was no special at hand, then you can resort to folk recipes. First of all, you can use dishwashing detergents, baking soda or glass cleaner. It is best to prepare creamy pastes, which are easier to apply and treat the surface with them.

A good cleaner for glass-ceramic stoves is table vinegar diluted in water. Together with effective solutions that rid the surface of dirt and stagnant stains, it also provides a disinfecting effect. If in household there was no special scraper for working with glass ceramics, it can be replaced with a soft structure. The main thing in preparing for care according to folk recipes is to insure the stove from deep scratches.

Cleaning technique

Wait until the hob has completely cooled down before working with food residues and loose burns. The state of technology can be determined by a special temperature indicator. More important question how to clean a glass-ceramic hob if foil particles have stuck to it or sugar has melted on the surface. In this case, the surface that has not cooled down should be processed. The complete scraper mentioned above is used. It resembles a small razor, which is easy to remove foreign particles from the surface. But this must be done carefully, without leaving cuts.

Detergents go into action after the main dirt has been eliminated from the coating. It is necessary to evenly distribute the composition on the plate, after which, using a sponge, perform circular cleaning actions. The last stage is also very responsible. The answer to the question of how to clean a glass ceramic hob so that it does not leave marks also depends on the quality of the materials used. On the final stage rinse off the cleaning solution and wipe the surface with kitchen soft cloths resembling fiber in structure.

How not to clean glass ceramics?

First of all, you should abandon the use of specialized tools designed to work with ovens. As a rule, these are effective sprays and stain removers that give a good cleaning result, but due to chemical properties not suitable for sensitive coatings.

A new glass-ceramic induction hob often has an adhesive layer on the surface. They mistakenly try to cope with it with abrasive coarse-grained tools. This should not be done due to the high risk of surface damage. Again, it is worth using the delicate function of the scraper, which will save glass ceramics from such unwanted coatings.

The nuances of cleaning models "Hans"

Hansa belongs to the group of manufacturers who in any case do not recommend maintenance of boards that have not cooled down. Also, the manufacturer warns against the use of even sponges that are soft in structure, since they are capable of causing minor damage. How should the Hansa stove be maintained in terms of compliance with the operating rules? Care should be as delicate as possible and with the use of mild products. These include emulsions and liquids designed to remove stains.

In extreme cases, in the absence special solutions combination can be used warm water and dishwashing detergents. As for the tool itself, the Hansa cooker comes with the same scraper, which will help remove particularly problematic particles from the surface of the glass ceramic.

The nuances of cleaning Gorenje models

This manufacturer also does not advise taking care of stoves that are in a heated state. To get rid of dried particles, the company recommends specialized formulations. She refers to such funds "Sidol", "Kerram" and similar to them in terms of a set of components.

It is important to note that glass-ceramic is also afraid of rough cleaners, which include metal sponges, alkalis and

Care of AEG boards

AEG modellers strongly advise not to wait for melted sugar or plastic to solidify on the surface and then deliver more more problems during the cleaning process. The same scraper should immediately eliminate the dirt, and then carefully remove the stains with a paper towel. In this case, the question of how to clean the glass-ceramic stove can also be solved by heating the equipment. According to AEG experts, this measure will help soften the structure of some types of scale and facilitate the process of their removal. At the final stage, the final cleaning is performed with a dry cloth or a new paper-based towel.

Conclusion

The induction principle of operation of modern cookers attracts a growing audience of consumers. Such models are good and effective heating, and ease of use, as well as a high degree management functionality. But it can provide all of these benefits only in the case of competent care.

If we combine recommendations for the maintenance of glass ceramics from different manufacturers, then the rules will be reduced to several principles. First of all, in choosing a cleaning method, you should be guided by quite affordable special products designed for this type of stoves. As for the limitations, they are quite definite - the glass-ceramic surface can be spoiled with strong chemicals, coarse abrasive brushes and sponges, as well as powders, the grains of which can cut the sensitive coating.

Progress does not stand still, and one of its manifestations for housewives is the emergence of a variety of household appliances, which, compared to the previous mass, have useful properties. For example, massive stoves have been replaced by hobs, which are light, comfortable and very ergonomic.

However, despite its advantages and attractive appearance, the question of cleanliness and bringing it into proper appearance remains open. No matter how careful you are in the process of preparing culinary masterpieces, drops of fat, fumes, boiled-off broths and other liquid dishes, as well as other stains will remain on the surface of the panel.

Of course, they need to be quickly wiped with a rag after cooling, but there are times when this cannot be done, so as a result we get ugly burnt spots and stains on our kitchen assistant.

Despite the traditional Russian tradition, before you start using the panel, carefully read the rules for its operation and maintenance! This will save you from extra hassle and let her serve long years you faithfully.

Such glossy surface should be cleaned daily after use.

If you cooked carefully, without burnt food remnants, then you can simply wipe the surface with a damp cloth and wipe it dry without streaks.

For cooking, use only serviceable dishes with a flat bottom. During use, pots and pans develop cracks and dents, which can damage the panel and leave scratches on it during cooking.

Therefore, the purchase and installation of a hob glass ceramic panel- a great reason to update the arsenal of kitchen utensils.

Moreover, lids for pots and pans must be selected strictly according to the diameter of the dishes. Otherwise, the resulting condensate will drip onto the panel. Even if it's just a normal scrambled egg, you'll have to wash the hob afterwards.

What absolutely can not be done when cleaning the hob?

Disregard the basic rules of household safety. In this case, it means that the panel should be washed only after it has completely cooled down, which will prevent you from getting burned.

In addition, it is worth washing the surface, only using gloves to protect the skin of the hands from chemical substances detergents.

Do not clean the panel with metal wire sponges and coarse abrasive mixtures. Moreover, do not use knives, rough scrapers and other objects that scratch the surface.

This rule is important because various scratches and chips can worsen the condition of the surface, and this will already negatively affect the appearance of the plate.

What means and tools to use for cleaning?

Soft sponges, rags. They must be specially allocated for cleaning the hob. Always keep clean and dry. You can use microfiber cloths and melamine sponges. In order to quickly remove stains after washing, you can use rubberized cloths.
No matter how trite it may sound, but it makes sense to acquire special scrapers for similar surface. No other object, and even more so a knife, spoon or stick, will replace this tool in terms of efficiency. No need to invent, you just need to buy a plastic scraper in the store.
Special Fluids for removing stains and streaks from the glass-ceramic surface. They do not contain aggressive abrasive particles, contain substances that break down fat, soften plaque, and are easy to use. As a rule, such products must be applied to the surface for several minutes, then rinsed with water.

How to quickly and effectively clean the hob?

In order to clean the panel, you will need to follow certain sequence of actions.

To do this, you first need to properly wipe the surface and remove drops, light dirt and moisten the existing burnt residues of your dishes.
After that, the surface should be treated with special agents and left to act for the time indicated in the annotation to the agent. Then rinse off the product.
Those remaining contaminants that the product could not cope with will have to be rubbed off manually. The best tool there will be a scraper for this, but they should not pick the surface fiercely. Holding it at a slight angle, the existing pollution is best washed with soft sliding movements.
After these manipulations, the surface should be wiped dry again with a cloth.

Folk remedies for removing stains from the surface of the glass-ceramic hob

In order to clean the surface, many experienced housewives use products that they prepare themselves.

Typically, these folk remedies includes acids - citric or acetic, a chemical dishwashing detergent, as well as a mild abrasive that is in any home - soda.

Vinegar and soda are used together and, while a violent reaction is taking place, is applied to the problem area. This allows you to break up hard dried stains and get rid of them easily.

And here citric acid, soda and dishwashing detergent are mixed to the consistency of a thick porridge and applied to the dirt.

Then, similarly to how specialized products are removed, they are washed off with a clean, damp cloth.

What means - folk or purchased in a store - to use to maintain cleanliness on your hob, you choose.

One way or another, if you are careful and considerate with respect to your glossy glass-ceramic hob, then it will invariably delight you not only with its intended purpose - cooking - but also with a beautiful appearance. After all, if you care about household appliances and its service life will be longer.

11/15/2017 1 5 104 views

Modern stoves with a glass-ceramic surface are purchased more often than other hobs. This is explained original design and ease of care. Consider how to clean the glass-ceramic surface of the stove from grease.

Basic rules for the care of glass-ceramic surfaces

When purchasing a plate with a surface of glass-ceramic material, you need to be prepared for the fact that the thing will require careful and accurate care. Of course, it is necessary to take care of all stoves, but hobs of this type are especially in need of this, since stains form at the slightest contact of fingers with the surface. And what about oil splashes or spilled broth.

To keep your glass-ceramic cooker looking its best, clean it every time after cooking. Otherwise, cleaning can turn into a real nightmare.
To wash the hob, use a separate cloth. That is, even the rag with which you erase dust from glasses and mirrors will not work.
To eliminate dirt, use window cleaners.

Thus, it is not difficult to take care of the hobs. The main thing is to do it regularly, as well as follow a few recommendations.

Before cooking, pay attention to the condition of the surface of the stove. It must be dry and clean.
Pots and pans must also be in perfect condition. One drop of salt water can greatly complicate the cleaning process.
Eliminate traces as soon as they appear.
Wait for the panel to cool down before using the cleaner. The temperature can be monitored by special indicators.

Clean the stove with a glass cleaner as follows.

distribute the composition over the surface;
increase the dose in particularly contaminated areas;
wash off the chemicals;
dry the surface with a dry cloth.

Avoid getting the smallest abrasive particles on the cooking hob, as they easily scratch it.

Special cleaners for glass-ceramic stoves

Household chemicals for cleaning glass-ceramic stoves easily and effectively remove pollution in the form of:

fat;
scale;
fingerprints;
burnt spots.

At the same time, the compositions do not scratch upper layer. In addition, the products provide easy further cleaning of the plate, since the ability to form silicone protective film, allows you to protect the top layer from dirt and damage. Also, the substance serves as a protection for glass ceramics in case of contact with a sweet liquid. The composition not only eliminates bad smells but also aromatizes the surface.

Experts believe that you can wash the glass-ceramic hob with window and mirror liquid.

When the device has cooled down, apply a special liquid.
Lightly rub it in with a rag.
Remove moisture with a dry, clean cloth.
Enjoy the radiance of the surface.

Use tile compound. In general, for cleaning glass-ceramic stoves, compositions for washing other equipment, such as refrigerators, are used. However, in any case, it is important to pay attention to the composition of the chemistry. In order to remove dirt from the hob, it is not enough to use a cleaning agent. You will need a special scraper. They are:

plastic;
steel.

A plastic scraper will not last long, so get a steel product with removable blades. Steel scrapers remind conventional machine for shaving. Some even try to replace them with a machine, which is absolutely impossible to do.

How to clean a glass ceramic surface at home?

To ensure that your glass-ceramic hob always shines with cleanliness, remove dirt immediately after cooking. Old traces are much more difficult to remove than fresh ones. You can eliminate grease and carbon deposits from a glass-ceramic surface at home using methods that have been tested by time and people.

vegetable oil

To remove dirt from the unit, use vegetable oils. They not only clean the ceramic slab, but also protect against the formation of dirt, as they leave a film on the surface that cannot be seen with the naked eye.

Put a few drops of oil on a cloth.
Wipe dirty areas.
The oil should not be washed off. This will allow you to easily remove stains with a sponge and water in the future.

Handles dirt well olive oil. It eliminates what even a scraper could not cope with.

moisten soft tissue oil;
apply to pollution;
after half an hour, wash off with one or another detergent composition;
treat the top layer with water;
use window cleaner.

Lemon juice and baking soda

If the hob has formed old spots with which even oil could not cope, use this mixture. The procedure eliminates complex pollution without damaging the top layer.

Take baking soda.
Add as much water as necessary to obtain a uniform consistency.
Spread the paste over the glass ceramic hob.
Scrub the dirty areas with a sponge.
Rinse with clean water.

If the stain does not rub off, on the surface with dried soda, drip lemon juice. There will be a neutralizing reaction that will quickly break down the stubborn layer of dirt. It is worth noting that with the help of soda not only wash the surface of glass ceramics, but also eliminate unpleasant odors.

Vinegar

Use vinegar to remove blue stains and streaks that result from dishwashing detergent. In addition, vinegar is an excellent remedy for bacteria and germs.

combine the same amount of water and vinegar;
fill the tank with liquid;
spray the composition on the plate;
after 3 minutes, wipe the surface with a clean cloth.

ammonia

Use ammonia-anise drops on alcohol. They effectively remove traces of burnt milk and quickly cope with the main enemy of glass ceramics - salty drops. Prepare a miracle - the solution is simple.

Take 250 ml of pure water.
50 ml of ammonia.
Mix the ingredients and pour into a spray bottle.
Spray the mixture over the hob.
After 10 minutes, rub the glass ceramic with a dry cloth.

When starting to clean the cooking surface, do not forget about the existing prohibitions, neglecting which can harm the appliance.

Do not heat the burners in the hope of easier and faster removal of burnt-on pieces of food. Wait for the panel to cool completely, otherwise there is a high probability of cracks or scratches.
When cleaning, do not use tools that are not designed to scrape dirt off the hob. Forget about knives, brushes and metal scrapers.
Do not allow the hot top layer to interact with the plastic. Traces of this material cannot be removed.

The service life of a glass-ceramic plate depends on compliance with the rules for its operation. Only in this way a faithful assistant will delight you for many years.

to clean the stove negative consequences, do not use metal washcloths and compositions with abrasive particles;
use a special scraper and;
put the stove in order not once from once, but regularly. For example, every week;
for cooking, use high-quality utensils. So, a curved bottom can cause damage to the top layer of the plate.

What exactly you will use to ensure that the stove remains as stylish and functional as the day you bought it is up to you and your wallet. Most importantly, the remedy must be safe and effective.

Video: how to clean the glass-ceramic surface of the stove from grease?

Additional questions

How to clean an electric stove?

Electric stoves, as a rule, are covered with enamel, the care of which is reduced to the use of a special paste, gel or creams. Elimination of contaminants with any composition in the form of a powder can cause irreparable damage to the enamel layer.

On sale there is an inexpensive, but effective composition for stoves - "Cif".

Wait until the hob has cooled down.
Apply to sponge.
Lightly moisturize it.
Apply the substance to the electric stove.
Wait until the active components of the composition have an effect on the pollution. This usually takes 2 hours.
At this time, remove the burners, remove the grate.
Place them in water with detergent.
If necessary, apply the substance to the inside of the oven.
If there are heavy dirt and pieces of food in the oven, place a container of water in it and turn it on at 80 degrees.
After half an hour, all the dirt will peel off with the steam of water, which will accelerate its further elimination.
After 2 hours, use a wet cloth to wipe off the detergent composition from the surface of the stove and its elements.

How to clean a stainless steel stove?

Stainless steel gas stoves come in spirit types:

mirror;
matte.

The approach to cleaning and maintenance depends on the type of unit. Modern stores for household needs offer a variety of products for cleaning various hobs.

If you choose the right tool, the appearance of the device will delight with beauty for many years.

So, in order to effectively clean your assistant, use products in the form of a cream, gel of a liquid consistency.
Additionally, use rags and sponges of a delicate structure.
Carefully free the surface of the stove from crumbs.
To do this, use a soft sponge.
Next, using warm water, soak the hardened dirt.
Moving your hand and sponge in the same direction, pick up what gets wet.
Sprinkle a cleaning agent on a rag and rub the stove, applying more diligence in problem areas.
Take a clean raw material and remove any remaining foam.
To polish the surface, apply a special tool.
Dry the top layer with a paper towel.

How to clean cast iron grates gas stove?

In careful and regular care also needs a cast-iron grate from a gas stove. Of course, washing it quickly is unlikely to succeed, but following our recommendations, you can do it.

turn on all burners. Fire will ignite the product perfectly. At the same time, turn on the hood, open the windows. This will provide access to fresh air;
next, wash off all the dirt from the cast iron;
wash the grate.

If you have a car, use engine washer fluid. The substance perfectly removes carbon deposits and grease from cast iron products. At the end of the procedure, it is enough to rinse the grate with water and dry it.

If the size of the grate does not allow it to be placed in a liquid, use the Anti-Fat tool. The composition of the substance effectively affects the pollution in ovens.

Apply water to the rods.
Lubricate generously with the composition.
After 20 minutes, remove dirt with a metal brush.
Rinse with clean water.

How to clean an induction hob?

Timely cleaning induction cooker, will allow you to effectively use its functionality for many years. To do this, always have at hand:

soft cloths;
sponges;
paper napkins;
composition for dishes;
special cleaner for induction hob.

To quickly bring the appearance of the plate in order, just use detergent and sponge.

Apply a few drops of the product to the sponge.
Rub over the surface of the hob.
Remove foam with clean water.
Use a tissue to make the surface shine.

Yes, you should do it every day. Once a week, use special products for glass ceramics. The substance forms a film that protects the surface from the appearance of new contaminants and their easy removal. Rinse thoroughly after application. The interaction of chemistry with a heated plate is the cause of damage to the glass-ceramic panel. Don't forget to polish the stove with a soft, dry cloth.

Categories

Popular