Plastic fences for flower beds and flower beds. Metal and plastic fences. Metal fence for flowers

Stone beds easily become part of natural landscapes, being one of the most inexpensive and simple options garden decoration. Decorative flower beds made of stones have long occupied a special niche in the landscape design of parks, gardens and suburban areas.

Rock beds, as a striking scenic element, provide gardeners and landscapers with a unique opportunity to use their talents when arranging plants that are fragile in their beauty with such harsh material as stone.

Minerals and stones for flower beds

Popular materials for arranging rocky beds and flower beds

Sandstone

The main features of this sedimentary rock include porosity and layering. Volumetric types of sandstone - rubble stones and boulders, are great for framing raised flower beds in the garden.

Limestone

Another sedimentary rock with a suitable texture for flower beds is limestone. The most common stone color is light gray. Less often in the design of suburban areas you can find rocks of yellow-cream shades, pink and blue.

Slate

A group of minerals consisting of several rocks at once is called shale. main feature natural material - the ability to delaminate into plates. Often, flowerbeds are simply strewn with slate chips, which is why they take on an exquisite and extremely unusual look. (In the photo there is a raised flower bed made of slate block)

Pebble

In landscape design, pebbles serve as decoration for open areas, as material for paths, and as a contour flower beds. Pebbles are laid, as a rule, on a cement mortar to make the gaps between the stones as narrow as possible.

Volcanic tuff

This stone has such important characteristics for decorative purposes as warm colors and durability. Beautiful flower beds made of tuff stones in the country are most often placed near small ones.

Granite

Having lain in the thickness of the earth's crust for millions of years, granite has become a worthy decoration of garden landscapes. In many ways, the scope of use is determined by the characteristics of the stone (frost resistance and moisture resistance).

Quartzite

An amazingly beautiful stone with a smooth surface and an enviable palette of shades. The main feature of the stone is the ability to reflect light and shimmer in the sun. That is why the mineral is so often used to decorate flower beds on the site.

The material was prepared for the site www.site

Brick

Do-it-yourself brick flower beds are built in random order or laid out with an original geometric pattern. The brick can be anything: white silicate or red ceramic.

For those who build a brick flower bed seriously and for a long time, a raised flower bed scheme will do. Just keep in mind that such a flower garden will require certain time and money costs.

A variant of the ideological decoration of the flower bed by the surviving monuments of the Soviet era (from stone busts).

The surface of the stones offered to consumers in the construction and landscape market can be chipped and even, polished and burned, matte and aged, sawn, etc. Regardless of the design, natural stones in the design of the flower bed do not lose their attractiveness either in summer or winter and under the scorching sun, and during the pouring rain. But even the impressive strength of rocks and river rocks does not save them from garden dirt.

Contamination can be prevented by reducing the absorbency of some stones (eg sandstone) by treating their surface with hydrophobic protective agents designed specifically for garden stones. Impregnation, penetrating into the stone material, makes its color more saturated, while strengthening its structure. The only stone that only gets better with age is limestone.

How is a rocky flower bed different from rockeries and rock gardens?

Firstly, in order to make stone borders for flower beds, you do not need to scrupulously select the material, as, for example, for. A flowerbed made of stones has little in common with a large-scale rock garden structure, which, in its essence, should correspond as much as possible to the natural topography of the mountains and contain plant varieties with a well-developed root system. In an ordinary flower bed, decorated with stones, the choice of plants is not so important.

A separate similarity can be found with. But again, in the rockery, minerals are used different size and lay them out naturally and asymmetrically. And simple round, rectangular or square flower beds in a country house made of cobblestone or brick are laid in exactly one to ten layers, depending on the desired height.

DIY flower bed - ideas for creating beautiful flower beds

Raised flower bed in a stone and cement garden

Unlike sloping stone beds, which are placed directly on the ground, raised beds are created using masonry walls, from 30 cm to 1 m high. The diameter of the flower bed directly depends on the number of plant varieties that are planned to be placed and the size of the site.

Do-it-yourself raised stone flower bed

Plan and technology for arranging a raised flower garden using rubble masonry

It is necessary to start the construction of any flower bed with a sketch. To do this, at the very beginning it is necessary to determine from which stone (sandstone, granite or tuff) the walls will be laid. Then calculate the amount of material that will be needed for construction.

Having chosen the right place for the flower garden (sunny and not windy), it is necessary to mark the lines of the base (one might say, the foundation), using a measuring tape, building thread and wooden pegs.

According to these lines, we dig a ditch with a width equal to the width of the future stone wall for pouring concrete under the masonry. Depths of 20 cm are enough. The soil dug from the trench is not poured into one pile, but folded in different directions: the fertile (upper) layer on one side, and the subarable (lower) layer on the other.

In order for the walls of the flower bed to be strong, they must be erected at a slight inclination inward, using rubble (stone) masonry. Laying begins with the largest stones (we save even stones for the top row).

We prepare organic material in advance (branches, branches, shavings, old newspapers, sawdust and trunks must be finely chopped) and mix it with fertile soil. After the stone frame of the flower bed is ready, its lower layer will need to be laid with brushwood, crushed stone or pebbles in an unground form (the worse the soil and the higher the walls, the more powerful the drainage layer should be), compact them, water and only then sprinkle with organic mixture.

Then once again carefully tamp and fill the flower bed with fertile soil. Water. Wait a few days until the soil sags well, add soil and start planting.

Plants for flower beds and flower beds made of stone

Composing a composition of different types of plants for a raised flower bed, lower varieties should be placed as close to the edge as possible, and high ones should be placed in the center of the landscape composition.

Interestingly, on raised flower beds made of stone, flowers develop faster and bloom more magnificently. It's all about the microclimate that natural stones create around themselves. In sunny weather, granite, sandstone and limestone heat up very quickly, thanks to which the walls of the stone flower bed remain warm even late at night.

Another interesting feature of rocks lies in their ability to retain moisture, and then slowly release it.

Also, garden plants with such a planting are less susceptible to attack by pests.

To make a flower bed made of cobblestones or bricks look beautiful, its design must be carefully thought out. In doing so, the following must be taken into account:

timing of flowering plants;
their conditions of detention;
compatibility in shades, height and shapes.

Example unpretentious flowerbed for the garden, designed in pink and red tones:

Dahlias, cleomas and mallows are planted in the background of the flower garden. We give the center of the composition to the lower plant - sage. And in the foreground we plant nolan, ageratum, marigolds and iberis.

The number of plants in each group is from 3 to 5.

If you want the flowerbed in the country to bloom regularly, choose such beautifully flowering flowers as: hostas, astilbes, roses, geyhers, hyacinths, crocuses, bells and more. others

Coniferous shrubs and trees as an element of decoration of stone flower beds

The flower beds around the tree look interesting. For example, under openwork crowns coniferous trees: heathers and erica grow wonderfully with junipers, firs and thujas. A stone ring is usually formed at a distance of half a meter from the lower paw of the conifer.

evergreen western thuja with dense, scaly needles "Holmstrup" (1);
juniper with golden leaves "Old Gold" (2);
spherical compact pine Mops” (3);
sprawling, slow-growing juniper "Schlager" (4).

A flowerbed made of mesh and stones, as an expressive constructive element of the garden

One of the most interesting flowerbed design options is gabions, the frame of which is made of a metal mesh and filled with stones. In the arrangement of flower beds, gabions are good because, having exceptional drainage properties, they remove excess moisture and do not allow water to stagnate.

Flower beds made of stone are appropriate everywhere: in trendy landscapes, and in classic-style gardens.

Flowerbeds made of stones - photo

Owners of private real estate are always trying to ennoble the area around buildings. To create a special design style of the fence, internal fences, in harmony not only with the facade, but also with the surrounding landscape. A beautifully made external fence, which is a single composition with the house, stands out for its exclusivity among the monotonous buildings. In a single architectural ensemble with pronounced exteriors of neighbors, it brings its own flavor to the overall architectural style.

Fence structures from various materials enough. The main thing is to choose the best option that elegantly fits into the surrounding landscape environment.

Having erected a decorative fence with his own hands from improvised means, the owner of the site will not only save his personal budget, but will also enjoy the quality of the work done. Admiration for craftsmanship, design abilities from relatives, friends, acquaintances, just passers-by. To build a picturesque fence on your own, a decorative fence for internal zoning is a simple task. The main thing is to start and in the process of work, skills, knowledge, and the ability to work with the selected material will be acquired.

Functions, features and application of a decorative fence

Elegantly arranged, made in an individual style, moderately colorful and elegant fence can perform several functions:

The construction of artificial fences on their own has some features.

Without knowledge, experience with the material, you will first have to study the topic, acquire practical skills.

Before creating them, first determine the functions that the fence will perform. Structures installed as an access barrier must be a reliable protection system from external encroachments. With this appointment, it is necessary to take care of strong supports, the foundation of the future structure. The construction of wooden fences will require special processing of the fence elements. Impregnation, staining will increase the life of the fence. Working with any blanks requires the skill of safe handling of it. We must not forget that the glass elements are fragile, require extra care when working, protection from cuts.

Hedges, like scenery, are not designed for long-term use. Over time, the owners may want to change the design to a more attractive one. Or new ideas will appear, fantasies of decorating the interior backyard space. Therefore, for the construction of palisades, fences, it is convenient to use even short-lived materials. The most common, leftovers:

plastic;
tree;
bricks;
glass;
stone;
rubber;
concrete;
metal.

Some craftsmen create combined structures that have their own flavor and attractiveness. And besides physical labor do not require financial costs. Following practicality, it is better to choose workpieces that will be familiar and convenient to work with. The most common for creating picturesque fences is a tree. Having properly prepared the structural elements, it is possible to operate the structure for up to 10 years. The tree is easily processed, takes the desired shape. Glass, plastic bottles are the most affordable, convenient for creating a quick fence.

Types of decorative fences from improvised materials

With your own hands, the creation of artificial barriers from improvised means, which abound in the economy, does not require much effort. The main types of decorative fences:

flower beds;
front garden;
reservoir;
garden;
sectional;
front doors;
zoning;
security.

Front gardens are fenced with wooden mini-fences. On flower beds, stone borders, miniature fences, plastic tape. Looks great pre-painted plastic bottles installed around the perimeter of the beds. Zoning fences can be made in one style for all zones. Individually selected for each area separately. Small metal fences adorn garden paths, ponds located on a personal plot. The front entrance of the house is ennobled with elegant fences that look spectacular against the general background of the facade.

Decorative wooden fences

Making a wooden fence is easy. You will need thin boards, the dimensions of which are determined by the purpose of the fence. Low hedges are used to separate flowers from lawns and paths. When restricting access to children, pets, the height is selected from 0.4 m. The configuration of the boards is created from simple triangles crowning the top decorative fence from wood, to carved complex figures. Workpieces are stuffed on two crossbars closely or at a certain distance from each other. Finished sections are dug into the prepared trench. You can install posts on which to fix the board fence flush with the ground.

A wooden lattice fence is assembled from slats. First, the contour is prepared, and then, having placed the slats, they are connected to the base. Between themselves, the structural elements are fastened with nails and screws. Sections are installed, fixed on previously dug-in supports. It is even easier to make wattle from branches from trees. The best option willow vine. Prepared branches are laid between driven wooden poles.

A rock

The construction of impressive stone structures will require the arrangement of a reliable foundation. Low stone barriers do not need support. Structural elements are stacked end-to-end and provide shape to flower beds, flower beds, beds. Placed in several rows, they block access to pets, kids. For reliability, they are laid on a concrete solution. The most convenient hewn stone, conveniently stacks on top of each other. The location of the buta in one layer close to each other is used to fence beds, decorate garden paths.

It is possible to produce zoning with granite of various sizes, separation of ridges. If there is a small reservoir, a spring on the site, then the stone is the most suitable decorative element. High granite barriers - reliable external protection of the territory. The construction of a serious system will require the skills of preparing a concrete solution, laying stone, and equipping the foundation for the structure. If you set out to create such a fence at home with your own hands, then having studied the construction business, it will not be difficult to build a structure that will stand for more than a decade.

Glass

Glass bottles are the most common raw material that almost every homeowner has. An artificial fence near the flower bed, the fence of the garden paths looks very original on the site. Glass bottles are unpretentious raw materials, withstand all weather disasters. Collecting the right amount will not be difficult. To increase the strength, sand is poured inside. Transparent bottles pre-filled with colored fine gravel look beautiful. A glass garden fence made from bottles will last more than one year. The placement technology is simple: they dig in with the neck down, half the height.

Some home designers like a different layout. They place the bottles upside down with identical corks. Laying is carried out in a trench at an angle. This option gives the flower bed, the garden bed a special look.

Brick

The simplest improvised means of zoning flower beds is a brick. The presence of residues can be used as an artificial fence. To create a florist, you will have to master simple masonry skills. Improvement of the territory is carried out by laying such as:

"Zigzag";
"Chess";
"Vertical".

When laying in a zigzag, the material is placed on top of each other with a slope of 45 °. In order for the elements to stand securely, they first dig a groove. Bricks are placed in it in a checkerboard pattern, on top of each other with small gaps, which are filled with cement mortar. When laying vertically, one row is placed vertically at a certain distance from each other so that the second row can be laid flat on top. Fantasy will help create from brick original figures. Very often they are surrounded by flower beds forming rhombuses, ovals, square, rectangular figures.

Plastic

Most often, plastic bottles are used to install flowerbed fences from them. You can paint the blanks with multi-colored paints. Such a fence will originally frame the beds. The forms are varied, as far as the imagination will suffice. First, a groove is dug around the perimeter half the height of the bottles. Then they are placed close to each other, covered with earth, rammed. Neck up or down, depending on the preferences of the owner of the site. If old vinyl records are lying around, you can also attach them by placing beds around the perimeter.

The formation of flower beds is also performed from sheet plastic. This is useful when it is necessary to stop vegetation spreading by roots. The height of the plastic sheet is selected taking into account the depth to which it must be placed.

Rubber

Old car tires are good for arranging small flower beds, flower bed. Ground is poured into the middle, seedlings are planted. Some gardeners are growing strawberries in such makeshift beds. Previously, at certain distances, the tires cut out holes for planting seedlings. The chambers are then stacked vertically on top of each other. Each tier is filled with earth. The system is stable, so you can place up to 6-8 rubber chambers. After that, an impromptu garden bed is planted with strawberries. The method is convenient when the personal plot is small. The chambers can be preliminarily whitewashed and painted.

For high-quality irrigation, a plastic pipe with drilled holes. If necessary, water is poured into it, which evenly flows to the roots of plants.

Metal

Metal systems are convenient for creating decorative fences. Usually these are small barriers installed for the purpose of zoning, decorating the territory. Working with metal will require certain skills, tools. Most often, electric welding is used. First, individual structural elements are prepared, then they are welded together. Such fences are durable, can be installed by driving the supporting elements into the ground. The remains of metal profiles are convenient to use in zoning flower beds.

Many gardeners who grow raspberries, blackberries use them as a limiter for the spread of plant roots. A trench is dug along the perimeter of the berry bush to a depth of 20-30 cm, a metal profile is installed. Then they fall asleep with earth, rammed. In the future, the roots of raspberries and other vegetation will not be able to spread throughout the garden.

Concrete

It is not difficult to make artificial concrete fences with your own hands. First of all, it will be necessary to master the technique of preparing the solution, the proportions of its constituent substances. For massive outdoor fences, the foundation is first equipped. A trench is dug, a wooden formwork is installed around the perimeter. The created box is filled with the prepared solution. Small concrete fences for flower beds do not require a foundation.

The prepared forms are filled with a solution, kept until the desired strength is gained. After that, the formwork is dismantled. The resulting volume is filled with earth, plants and flowers are planted. Small flower beds are made of concrete, which are installed at the main entrances to the house, cottage. Common shapes: rhombuses, squares, circles, rectangles, ovals.

Hedge

Decorative fences made of living plants are very popular with many owners of houses and summer cottages. The main thing is to find the appropriate seedlings desired type, quantities. It can be trees with a falling crown, densely growing shrubs. Villagers often arrange living hedges of blackberries. The plant is unpretentious, growing rapidly. It spreads by the root system, so you have to equip an underground barrier.

Natural blackberry hedge cheap option arrangement of a natural fence. The main thing is not to start uncontrolled growth. You can create a natural hedge from the following plants:

Grapes girlish;
honeysuckle;
climbing rose;
Lemongrass;
Ivy.

When choosing a living fence, you need to pay attention to how plants tolerate pruning. Some, like juniper, are intolerant of such treatments. Therefore, if planting these plants, it is necessary to give them the opportunity to grow freely.

gabions

In arrangement adjoining territory gabions are also used. To create your own, you will need metal grid with a certain mesh size. First, a rigid cage is assembled, which is covered with the available mesh. Gabions are made from anti-corrosion coating. The cage in the grid is made depending on the size of the filler.

The system is created by welding individual wires together. small gabions cylindrical shape used as a separate decor on the site. You can plant plants or assemble a composition from individual elements. The main thing is to have the skills of welding metals. Gabion filler: rubble, gravel, pebbles, granite. The flower beds arranged in them look good. You can diversify the landscape of the site in small forms by purchasing finished mesh, independently giving the desired geometry, reinforcing with rigid ribs.

DIY decorative fence made of branches

An interesting fence, as a decoration, protection of a backyard area is a tyn or a wicker fence. This type of arrangement has ancient roots. It was a common type of fence of past centuries. It is made from improvised branches, sticks, vines. Today's landscape design has made branch decor quite popular. The construction is environmentally friendly, natural. Such an element of Slavic culture has become fashionable today. It can be installed in the garden or protected from the access of animals, children and other courtyard areas. The technology is simple: branches cut from bushes are woven into the established supports, stakes.

Preparatory work

As raw materials, two groups of elements of a wicker fence are harvested: supports, rods. For the first, thick branches with a diameter of 6-8 centimeters are suitable. Can be used metal pipes, wooden poles. The basic principle is that the higher the supports, the thicker the rods can be used in weaving. The material is prepared with fruit trees, willow, birch. Rods from maple, poplar are also suitable. Harvesting is done in the spring, before the appearance of sap flow in the trees. In dry, hot weather, cutting the rods in the summer is allowed. Branches are separated at angles in the range of 40-60º. Tyn is woven from freshly cut blanks. Harvesting is allowed for the future, but before use, the rods are soaked in hot water. Wooden supports are impregnated, fired, and tarred. The most optimal pillars are made of larch, which does not rot.

Main works

After the preparation of materials, they begin the main work. First of all, the pillars are buried. For a wattle fence one meter high, the supports are hammered to a depth of at least 0.3 meters. A one and a half meter fence will require deepening of the supports by 0.5 m. When constructing a low tyna, the pillars are dug in at 0.2 m. The distance between the supports is 0.4-0.5m. Large thickness rods makes it possible to install poles more rarely.

At the edges of both sides of the fence, three poles are driven in, a distance of 0.20-0.25 m from each other. This is done in order to rigidly fix the vines in the initial, final sections. Then the rods are woven, placing blanks in turn between the supports. The lower rows of the vine must be fixed with wire, deepening into the ground by 10-15 cm. Subsequent layers of branches are attached with wire around the frame. Weaving begins from the thicker side of the rods, overlapping the thin ends of the branches.

After passing three, four rows, it is necessary to compact the vines. This is done by tapping on them with a hammer. Panicle endings on the vines are pre-cut. If cattail, reeds are used - laying between the posts is done in armfuls of material. After the work is completed, the wattle fence is decorated with national ornaments and antique utensils. To increase the service life, the structure is varnished.

Conclusion

Options for creating elegant, practical barriers for various purposes a bunch of. It is necessary to purchase a tool, start studying carpentry, construction and work out skills. The choice of improvised means for fast clearance the flower garden will take a couple of minutes. Flower beds can be arranged in concrete containers filled with earth. Such flower beds decorate the main entrances, placing them around the perimeter of the porch. They look beautiful, and weaving plant species create coolness in the heat. It is easy to create green walls from them, which, during the flowering period, are fragrant and amaze with their beauty. On a private plot, you can always create exclusive decors, easily dismantled parts of fences. Fences protecting plants from encroachments of poultry, animals, children's pranks.

Depending on the general stylistic decision of the garden composition, an external fence is selected for each flower garden, the purpose of which is to give the landscape element a finished look. Compare the advantages and disadvantages of the materials used to create the contours of flower beds, find out what other tasks the borders perform and how to make fences for flower beds with your own hands from purchased and improvised means. Evaluate the ideas presented in the photos and create a unique blooming corner in your garden.

Features of the choice of fences for garden beds

To create a flower garden perfect in every respect, it is necessary to think over its fence at the planning stage, so that you can make adjustments for the relief, lighting, neighboring elements and the compatibility of the colors of the fence and plants. The selection of material for fencing a flower bed is based on the following parameters:

budget: plastic is cheaper than metal or paving slabs;
accessibility: the “deposit” of crushed stone can be literally around the corner;
durability: wood will last much less than concrete and slate.

Narrow stitch plastic tiles separates the decorative part of the yard from the lawn

In addition, the type of flower garden and the purpose for which the fence for the flower bed is installed are taken into account.

Types of fences for different types of flower beds

Flower arrangements are divided into regular and free. Of the flower beds, the creation of which is possible in the conditions of a small private garden, flowerbeds and rabatki are regular ones. They have a regular geometric shape and therefore are emphasized by smooth, clear contours. Metal and plastic fences, curb tapes, bricks, tiles and concrete are suitable for them.

Groups and mixborders are performed in a free style, as well as rockeries and other compositions based on stone and gravel. Such flower beds look advantageous against the background of wooden fences: timber, boards, willow braids, logs and even sleepers.

AT last years a fashionable trend appeared abroad - flower gardens natural style, giving the impression that the human hand did not touch them. For framing use only natural materials: wood and stone.

Additional functions of flower garden fences

In addition to their main purpose - to create a sense of completeness of the flower garden - fences serve several other secondary purposes, which also affect the choice of material:

zone the site - you will need a fence that is inexpensive, discreet, having a variety of shades, for example, paving slabs or mosaics on concrete;
to keep the plants within the flower garden - a deaf plastic fence will cope, the lower part of which goes deep into the ground;
a high hedge for a flower bed made of timber or metal will help protect flowers from dogs;
at the same time serve as a curb for garden paths - you will have to build a stable fence of brick or paving slabs on a concrete basis.

A strip of paving slabs flush with the soil

The height of the fence depends on the species selection of the inhabitants of the flower garden. Around undersized plants(violas, cineraria, tagetes, sedums) or a tapeworm framed by ground covers are laid out exclusively high fences for flowerbeds: tiles flush with the ground, artificial stone, low plastic elements. They do not suppress flowers, revealing even the smallest specimens, but clearly separate their territory.

Large species (delphiniums, golden balls, dahlias) are suitable for high fences for flower beds: timber, forged gratings, willow wattle, bamboo. For roses and especially rose hips, a rustic fence for flower beds is suitable, for conifers - natural stone.

Fence in the form of a medieval castle around hosta and echinacea

DIY fences for flower beds from improvised materials

When the choice of material is made, they begin to calculate its quantity, and the more expensive the material, the more carefully this operation is performed. Preliminary figures can be sketched on paper, the final ones on the ground, with twine and a tape measure.

The twine is laid out on the ground around an existing or future flower garden, if necessary, pinned to the ground using curved pieces of wire until a complete outline is formed.
Then the pins are removed, the twine is pulled along the tape measure and the number of linear meters of material is obtained.
Multiply by the cost of one linear meter and get the price of the future fence.

Sunflower against the background of a classic white picket fence

Each type of material has its own characteristics, which will be discussed below.

Wooden fence for natural flower beds

The main value of wood is naturalness and complete closeness to nature. Decorative wood railings for flower beds are used to create a rustic design style in combination with stone, garden figurines, benches and swings. Wood is recommended for use as an enclosing material, because:

it is easily processed with the usual set of tools;
environmentally friendly during operation and easily disposed of at the end of the service life;
does not heat up, which eliminates burns on the leaves touching the fence;
can serve as a support for climbing and climbing plants.

Green and burgundy tones of plants are emphasized by unskinned logs

A significant disadvantage of wood is its fragility: it attracts wood-eating insects and rots in damp ground. To solve this problem, wooden elements are treated with an antiseptic before installing a fence for a flower bed or wrapped with a piece of roofing material from below.

Wood in the construction of flower beds is used in the following forms:

board;
lining;
fence;
timber;
logs;
croaker;
cross cuts.

Such a rich palette of materials allows you to achieve a variety of effects. For example, fencing flower beds and flower beds from boards of the same size sets a clear geometry and brings the overall look of the garden closer to a regular type. Slabs and saw cuts, on the contrary, exclude strict symmetry and are not suitable for perfectionist masters, since each element has a special shape. A fence for flower beds made of timber adds a component of solidity, and a lace picket fence adds summer frivolity.

Installation wooden fence, for example, from logs, do-it-yourself involves the following steps:

Choose suitable trunks of even thickness.
Saw them into logs on the basis that 20 cm of length will go into the ground.
Clean the logs from the bark and soak with an antiseptic.
Take out the ground around the perimeter of the flower garden to a depth of 20 cm.
Install the finished logs tightly, aligning the height with the stretched cord.
Fill the groove with logs with earth and tamp.

Wicker borders for fabulous design

Wicker borders can be called a special case of wooden fences, setting the pastoral spirit of old French fairy tales in the garden. Fences for a flower bed made of branches do an excellent job of keeping the shoots of ornamental plants within the flower garden. In winter, they serve as a snow-retaining shield, protecting plantings from freezing.

You can weave a fence for a flower bed with your own hands from a flexible willow vine of the desired diameter. Harvest the vine in early spring, during the beginning of sap flow, then it is easier to remove the bark from it if desired. To prevent the wattle from looking like a disheveled nest, the rods are cut to the same length, removing the thin tips.

Strong pointed pegs are driven in along the perimeter of the flower garden at a distance of 30-40 cm from each other and braided, passing the vine either in front of the peg or behind. After completing several rows, they tap with a mallet to seal it as much as possible. The ends of the rods are nailed to the pegs with small nails or furniture staples.

Capital brick fence

Brick is a durable, not prone to overheating, moderately elegant material for framing a flower bed. As a rule, a lot of it remains after the construction of a house or garage. In this case, even lines made of bricks of the same color and texture will allow maintaining the stylistic unity between the buildings and the garden.

Proper laying of bricks will ensure the durability of the curb

The disadvantage of this material is the laboriousness of the work, since the aesthetics of even the smallest fence for a flower bed suffer greatly if the bricks are laid unevenly or their edges are chipped. To successfully enclose a flower bed using the "corner" technology, it is recommended to follow the following instructions:

In place of the future border for a brick flower bed, they dig a groove 15-20 cm deep.
Pegs are driven in along the groove, along which the cord is pulled at a height corresponding to the upper level of the future curb.
Until the middle of the depth, the groove is covered with gravel or small gravel (which is more accessible).
A solution is poured over the rubble, leaving 2-3 cm to the soil level.
Bricks are laid on edge in mortar, making sure that the top corner touches the cord.

And the brick looks like lace when laid right

With the help of a brick, you can block the flower bed with your own hands and without the use of mortar, if the masonry is carried out with the wide side down. The stability of the structure is ensured Smooth surface and the severity of the material.

Lightweight and affordable plastic fencing

Plastic is durable, chemically stable, does not corrode, rot or heat up under the sun. Its only drawback is the feeling of cheapness, and sometimes clumsiness, however modern manufacturers try to avoid this and offer plastic borders for flower beds, which are difficult to distinguish by eye from stone or wood.

Polymer fences for flower beds are divided into curb tapes and sectional fences. Curb tape is available in rolls, has considerable flexibility, and its texture can imitate any other material, from brick to tree bark. The installation of such a fence for a flower bed is elementary: it is enough to dig a groove, install the edge of the tape into it, fill it with soil and tamp it down.

The mallet does an excellent job of drowning plastic tape in soft ground.

Sectional plastic fences are valued for more than curb tape, strength, and ease of movement to another place. On the underside, they are equipped with pegs that are driven into the ground with a rubber mallet. It is only necessary to ensure that all sections are at the same height.

Border tapes and deaf decorative plastic fences for flower beds allow not only to mark the border of the flower garden, but also prevent soil, irrigation water and fertilizers from seeping into the paths. To do this, you need to make sure that the edges of the individual sections adjoin exactly end-to-end, without cracks and gaps.

Solid stone fence

A carefully crafted and tastefully laid natural stone border for a flower bed gives any plant arrangement a sophisticated look, as it emphasizes the tenderness and fragility of flowers. As curb stone for flower beds use the following rocks:

sandstone;
limestone;
slate;
volcanic tuff;
granite.

Laying stone fence

When choosing a breed, physical and Chemical properties the minerals it contains. Tuff, limestone and sandstone are soft and can be processed at home, such as sawing off excess, leveling the surface, drilling holes for fasteners or planting ground covers.

On the other hand, these rocks are porous and therefore prone to contamination, especially in urban areas. Borders of sandstone and especially limestone are gradually destroyed by acid rain. And if the stone itself is only covered with a touch of antiquity, then the calcium released by the acid will begin to alkalize the soil. Do not use limestone for flower beds with plants that prefer acidic soils: azaleas, heathers, hydrangeas, lilies of the valley, bergenia.

The question of how to make a stone fence for a flower bed is primarily related to the size of the material. Large stones can simply be laid on the surface of the earth or slightly deepened. They will settle under their own weight and are unlikely to budge. The same applies to any limestone, slate, sandstone or granite: its plates are stacked on top of each other and held by friction.

Borders for flower beds made of cobblestone and pebbles require strengthening concrete mortar otherwise, over time, they will quickly sway and crumble to the sides. It’s better to tinker with pebbles a little, making a gabion out of it - a container made of thick wire mesh filled with stones.

Metal fence for flowers

Craftsmen create genuine masterpieces with a unique pattern from forged metal. Metal gratings are openwork, attractive, reliable, look expensive and non-standard, but require protection from rust. Iron fences for flower beds during installation are treated with an anti-corrosion compound and only then painted special paints well suited to metal.

Forged fences for flower beds are combined with any plants, stone, wood, benches, barbecues, ponds and lamps, they look luxurious in winter. It is recommended to choose a forging pattern without pointed teeth, especially if children and animals are walking in the garden.

A fence for a flower bed made of metal can be forged, cast and welded. In the latter case, it can be made independently, having welding machine and pipe cuts. Based on the available material, a simple pattern is thought out and its parts are welded to each other. To install a fence for a flower bed from fittings or pipes, the required number of pins are prepared. They are strengthened in a hardening solution, which is poured into a trench around the flower garden. In the future, fragments of the fence are welded to these pins.

practical concrete fence

Concrete is one of the most durable materials for arranging the contours of flower beds. Practical borders for flower beds made of this material do not change the acidity of the soil, are not destroyed by precipitation, and are not afraid of frost. It is convenient to work with concrete with your own hands, the main thing is to have time to give the product the desired shape until it has completely frozen.

bottoms glass bottles create a fantastic border

A do-it-yourself border for a flower bed made of cement and sand can be stretched across the entire plot, framing garden paths at the same time. To avoid monotony, the upper face of the concrete edging can be decorated with a mosaic:

from colored stones;
glass shards;
bottle bottoms;
shells;
leaf prints.

To fill the curb for a flower bed made of concrete, it is necessary to dig a trench of the desired width to a depth of 15 cm and put the formwork. Pour the bottom with fine gravel, pour concrete on top and carefully level it.

Decorative monolithic blocks

Slate fence

Slate is very durable and, unlike plastic curb tape, does not lose shape over the years. It is produced in wave and flat, in the garden it looks more interesting wave. A serious disadvantage of slate is the presence of asbestos, which may affect soil animals and the roots of particularly delicate plants. The same circumstance forces to cut the slate with the use of a respirator.

Slate formwork for a round flower bed with a path in the middle

To protect the flower bed with slate, it is cut across the waves into pieces. To do this, a sheet of slate is placed on boardwalks or on an old staircase, marked out, lines are soaked with water and sawn with a grinder.

Slate does not bend, so fencing flower beds with this material is possible only in a straight line or in small segments. A narrow groove is dug along the contour of the flower garden, prepared plates are inserted into it, sprinkled with soil and strengthened with inconspicuous pegs on both sides.

For rounded elements, slate will have to be cut into pieces

Borders from improvised materials

A simple fence for a flower bed can be made by simply laying around it the pebbles found near the river, rounded with water. At your leisure, you can invent ways to edging flower beds from a variety of leftovers found in the attic or in the barn:

bamboo trunks;
glass and plastic bottles;
ondulin and professional sheet;
large sinks, plates and vinyl records;
shell nets from old beds;
unusable hoses and tires.

PET bottles will turn into beautiful fences for flower beds, if you take a container of dark plastic and dig it upside down. They must first be filled with earth or sand, then they will not lose their shape.

The original fence for the flower bed is obtained from car tires turned inside out. If you leave the disk at the same time, then as a result a flowerpot on a leg will appear. By painting it in the appropriate color, you can even achieve the effect of marble or bronze with a patina.

Garden beds, trimmed with lacy cast-iron grating or a narrow strip of mosaic tiles, will make you want to admire them and take care of the flowers. The right choice of a beautiful and durable material for creating contours will allow you to create a harmonious ensemble of living plants and man-made elements on your backyard.

If you have a country house, then you probably want to make the area near it beautiful and well-groomed. So you can show yourself landscape designer. To save money, you can make decorative borders on it with your own hands, especially since this is not difficult if you know some of the nuances.

Peculiarities

Every flower garden in the garden deserves attention. Therefore, it is very important to choose the right external fence. However, everything is not so simple here. It is necessary to choose the material from which the border will be made. You can get creative with this process by carefully and attractively laying it out with your own hands. The main thing is to work with your soul and not hold back your imagination.

Before installing curbs, decide for yourself the following:

What role will your fence play? To highlight the borders of a flower bed or garden, you can use small objects. Miniature fences will be a wonderful decoration of flower beds and will complement the overall exterior.

To protect the flowering zone from pets or children, higher fences (about 40-50 cm) are best.

What will the fence be made of? Whether it will be metal, wood or plastic - each of these options is endowed with certain characteristics.
plant properties. It is worth considering that flowers can be tall, curly, stem, leaf, and so on. The border should match them externally and not interfere with their growth.

Where to begin?

First you need to decide what material you will build fences from. Can be purchased from specialty stores prefabricated structures, which you just need to fill with a solution of cement or concrete. But it is better to think about whether it is worth spending money and making a general garden decor capital.

Flower arrangement and style garden plot – important points when choosing a fence. The overall garden composition should look harmonious. The design of the fence does not have to consist of some elements. It looks pretty boring.

Basically, the choice falls on stone materials. They give the fence a solid and noble appearance. To fix the elements, it is recommended to use cement or concrete. Small parts of the fence can be fastened with building glue.

Working with bricks is much easier. Such fences will perfectly complement the country style.

Everyone can come up with an interesting idea for decorating flower beds. And improvised means will always come to the rescue. These can be bottles, broken bricks, wooden discs, and even bowling balls. These materials will turn your garden into a real one. paradise. After all, everything that is done with your own hands looks beautiful and original.

This arrangement is economical, individual and practical. Even the most seemingly unnecessary things can be suitable for such a design: ceramic fragments, slate, logs, stones. However, choosing the material is half the battle. It is also necessary to arrange it beautifully, covering it with colored paint or correcting the material: file it, sharpen it. But it is important not to overdo it, otherwise you can spoil the whole picture.

Installing decorative borders with your own hands has many advantages:

You can both emphasize the merits of certain plants, and vice versa, hide the visible imperfections of the site.
You create your own design the way you like it.
Everything you need for installation is at hand.

When choosing a material, consider whether it can resist external influences: temperature changes, weather conditions and precipitation, pets, children.

About installation rules:

Try to make the fence as neat as possible. Building with your own hands does not mean doing it how it will turn out.

The choice of height depends on the purpose of the fence. To protect against animals or children, it is better to use fences higher.
When working with concrete elements, it is necessary to make an appropriate depth in the soil.
Metal products look attractive and impressive. Therefore, they are best placed in the center of the garden plot.

Installation steps:

All structures must be even and uniform.
Mark the boundaries of the flower bed.
Dig a trench. Its depth depends on the purpose of the border, but not more than 8 cm.
Install a fence and tamp the ground well.
If necessary, supplement the base with small cobblestones.
For a small fence, it is not necessary to dig trenches.

Material selection

It is necessary to choose the right material for the future border. Consider the most popular options for fencing.

Plastic

Working with plastic borders is very convenient. Plastic bends well, so it can be easily adjusted. Such material is sold in the form of a roll. Plastic curbs are used in illuminated sunbeams places. Installing such fences is easy, just stick them into the ground.

Plastic elements do not give in to temperature extremes and retain their shape for a long time. They are easy to install, but difficult to adjust.

The advantage of plastic is that it is easy to match colors, sizes, shapes and styles. A huge plus is the possibility of its imitation of other materials, such as wood.

Fences made of such material began to be used quite recently, but it is already very popular among gardeners. A plastic fence is sold not only in rolls, but also in plastic kits and is a sheet with a length of 3 m and a height of 13 cm. It is very convenient to limit paths, beds and flowers with them. You can connect the elements with wedges. Additional work plastic is not required. It is not necessary to paint the surface, as it is completely ready for use. Besides, plastic sheets well suited for arranging children's sandboxes. They are quite reliable and safe.

Metal

One of the best options for fencing flower beds. Metal fits perfectly into the overall composition of the garden plot. Metal products have strict lines and clear proportions. Installing metal fences is not so easy. You need to skillfully handle the tools, but in the end you get an excellent fence for flowers. Metal pipes are also suitable for this.

Some time later on metal products rust may appear. But do not be upset, you can use this unusual effect to create an image of distant antiquity.

You can also decorate flower beds with bicycle wheels and frames.

Metal fences can be forged or cast, they always look elegant and stylish. You can even order your own design option, while you need to specify the necessary parameters (size, color, rough sketch). Metal fences symbolize luxury and strength, and their lattices can be used as a support for climbing flowers. However, such a whim will cost a pretty penny, but it's worth it.

Wood

One of the most classic popular materials. Naturally, without his participation, the arrangement of flower beds is difficult to imagine. Wooden fences always look spectacular and profitable. If desired, it is possible to create an interesting design if you use hemp. Wood is not the best durable material, but to correct the situation, you just need to periodically process the curb with special tools.

wood material indifferent to temperature changes and at the same time retains its properties. Even if the tree decomposes, it will give useful organic elements to the soil.

Wood products complement the Provence style well. In the front garden or a small garden, you can put wooden borders enclosing bright lush flowers.

Wooden fences look more natural than from other materials. They are quite tolerant of the sun and harmless to flowers. The tree is easy to process. In addition, such material can be used in any form: fragments of branches and old logs will come in handy.

One of simple ways fences - wood chocks. You will need small logs of the same size. Before using them, it is necessary to clean the bark and treat the wood with special products. We bury them inside the ground by about 15-20 cm, for reliable protection wood from moisture, you can use roofing material. Thanks to this protection, the fence will last for several years.

Real craftsmen can give the tree incredible shapes. Wood pegs can create a wave by lining up stakes different heights. Rectangular fences resembling pencils or oars are one of the popular designs. To add the missing colors, the tree is usually stained. This method is often used to add vibrant elements to floral designs.

Brick

From such material, a fairly strong and beautiful border can be obtained. First you need to dig a trench along the flower bed. The depth of the trench must match the size of the material. Next, pour a solution of concrete or cement and place the bricks halfway into it. The gaps formed between large stones, you can fall asleep with small stones. Garden paths can be laid out in the same style.

Creating an unusual and interesting brick border is easy. It is enough to collect a few fragments and lay them out along the flower beds or beds. You can lay them out in a domino shape, so they will look neat and beautiful.

improvised means

To create a border, you can use any improvised means. You will need not only stones, but also honeycombs, as well as tires.

stones

Making a fence for a flower garden from natural stones is not difficult. Plus, you can get them anywhere. Gather all the stones from the yard and garden. Choose from the entire set those that are suitable for decoration. Large stones can be placed along the flower bed, pour the base with concrete (or add building glue). Flat stones are used to build a high curb. It is necessary to dig a trench, fill it with concrete and lay them out in a row. For brightness, you can cover the stones with multi-colored paint.

Glass bottles

Quite often there are fences lined with bottles. Ordinary glass bottles are stuck upside down. You can alternate them by size or sort by color. To increase the strength, sand is placed inside the glass bottles. Plastic bottles also suitable for enclosing the area. True, they are not so durable.

Ceramic products

Do not rush to throw away broken ceramic plates or mugs, because they are quite suitable for creating flower fences. For safety, it is necessary to grind their edges. A wonderful border will turn out if you skillfully play with colors, sizes and patterns of ceramics.

Straw

Surprisingly, straw can also play the role of a flower fence. Masters and amateurs unusual design weaving nets from straw bales. And gardeners can lay out straw as a kind of decorative border. It is carefully rammed, covered with mesh and placed in a special trench.

The most important thing in this is safety. It is important to prevent fire and, just in case, have a supply of water next to such a curb.

Slate

Another option from the category of improvised means. By decorating slate or tiles, you can get a bright and unique decor. This is very beneficial because you can constantly change color variations.

Vegetation

Undersized climbing plants can replace barriers. Shrubs - a good option to create living tall borders. The height should be approximately 40-45 cm. This design creates harmony in the garden and goes well with overall design. In addition to shrubs, carnation bushes, lavender, sage, daisy, lungwort, cuff are well suited for these purposes. For greater attractiveness, you can carefully trim the bushes.

For a hedge, proper and timely care is extremely important. It is necessary to cut the shoots of plants and periodically rejuvenate the shrub. And although such luxury requires maintenance, such living borders look simply amazing.

Experts advise choosing evergreen shrubs so that their appearance is pleasing to the eye even in harsh winters.

Original design methods

Sea shells can act as an original decoration. This design will look beautiful and unusual. If you wish and have imagination, you can try to build various patterns from them, for example, in the form of a star or the sun.

Perhaps one of the strangest and most creative ways to fence flower beds is with bowling balls. This option is rare, which gives it some originality. They will stay firmly in place. For reinforcement, you can pour sand inside.

The garden has been dug up, the seedlings are ready for planting, but in addition to vegetables and useful crops, I would like to pay attention to the beauty of the garden, namely the fencing of the flower beds. Flowers growing one by one or in pairs, descending in garlands from balcony boxes, or arranged in a single composition under the windows of your beloved home, will give joy after labor day and take a break from work. But how to keep this beauty? How to protect flowers from the ubiquitous line of a lawn mower, from children always running somewhere, from dogs who strive to lie down on them? Let's consider a few examples of making a fence using improvised materials and a minimum number of tools.

natural stone border

Stone is not an enemy to plants. Many people know that sculptures created from durable granite, after centuries, brought to today beautiful faces of ancient women and muscular torsos of men. Frozen in stone, they still amaze with their beauty.

And why not use this durable material to decorate adorable petunias, lupins, cosmos, marigolds. Granite and marble, of course, are not the cheapest option, but you can resort to the help of improvised representatives. stone world, for example, cobblestones, which can be found almost everywhere. Having made a considerable margin, you can impose a fairly large one, thereby protecting it from lawn mowers and other cutting tools.

Variants of the forms of a natural stone fence depend only on the author's imagination and the amount of source material. The advantage of this fence is durability, and the minus can be considered a small height and, over time, a natural subsidence deep into the soil.

Fence for a flower garden made of wooden pegs

Tired of the old plinth, why throw it away? Miniature, up to 20 centimeters, wooden fences look very unusual and pleasant, enclosing plants of medium height. The construction of such a fence will take several hours of time and a couple of meters of the old plinth.

First of all, you need to decide on the height, mark it on the base, and saw off the pegs that will make up the fence.
For the convenience of inserting such blanks into the ground, it is advisable to make an acute angle from one edge, and leave the top straight.
Pegs are either dug in or driven into the ground by 5 - 10 cm, for greater strength. Thus, the workpiece is a peg 30-35 cm long.

The advantage of such a fence is its original shape. The disadvantages include the difficulty of setting a straight line, but using the level, you can achieve greater accuracy.

Glass bottle fencing - simple and affordable

Glass is not a new material, and certainly not expensive. After all, for sure in your house there is sometimes a bottle of beer, champagne, Coca-Cola or lemonade by the trash can. They will serve as an excellent basis for a decorative fence. All you need to do is collect the required number of glass bottles. For an average-sized flower bed, approximately 20-30 pieces will be required. During the winter period, it will not be difficult to collect such an amount.

The construction technology is extremely simple, pulling out a small hole, you need to stick a glass bottle upside down and dig it in for greater strength. To keep a straight horizontal line will help the usual building level.

Glass bottle fences are durable and look great next to low plants.

Considering possible ways to improve a flower bed, each owner is looking for the most simple and affordable option. It's easier than building a fence out of crushed stone, wood, or glass bottles. Let's analyze a few more options for decorating floral splendor:

Wooden rods and tree branches as a decorative fence

Rods and branches - to the fire or to work? To build original barriers from the branches of an old tree that fell under an ax - there is nothing easier! Naturally, branches are taken as the basis, but their selection is very important.

To decorate a flower bed, it is advisable to use straight or slightly curved rods. Branches that have knots or shoots are not suitable for work, because with the growth of green spaces, the stems will hang on them and cling. It is advisable to clean straight branches from the bark and dry. An ideal option is also to impregnate them with antifungal agents, but not necessarily.

The construction of such a fence is as follows:

Straight base stakes are driven into the ground at a distance of 10-15 cm, rods or branches are laid out between them;
Fastening, for greater stability, is carried out with twine or fishing line. The height of the structure depends on the number of rows thus laid.

The advantages of the design are ease of execution and naturalness. appearance. The disadvantages include a small durability, in general, from 2 to 3 years, and the possibility of curvature under the influence of weather conditions.

Another option for wicker fences is a wicker fence. It looks very aesthetic. The method is similar to the construction of branches and rods, only due to the length of the base material in the process of laying out the rows, the main pegs-supports are intertwined.

The advantages of this version of the improvement of the flower bed is its excellent combination with the landscape and aesthetically simple appeal. The downside is that the short life and possible corrosion of the material. Wood processing tools will help to correct these shortcomings.

Macrame in garden design

The macrame technique, which is based on a special weave of threads, can be beautiful and unusual option flower bed decoration. Naturally, strong twine will serve as the main material. Any drawing can be taken. Detailed diagrams can be found online or in craft magazines.

Wooden pegs will serve as fasteners for the original baubles, which can also be braided to match the main motif. The advantage of this work is its originality. The disadvantages include a fairly long duration of work and a short service life.

A fence of dishes (photo)

Dishes beat fortunately. There are three plates left from your favorite service, which are not only embarrassing to put on the table, but also insulting to tears. The saucer cracked or split in half, it doesn’t matter, we collect fragments for the fence, they will serve as an excellent basis for creative design flower bed.

Simply stuck into the ground or embedded in cement mortar, once a work of ceramic art, today will become an original decoration flowering plants. The simplicity, durability and unusualness of such a fence is a definite plus, only some danger to children can be attributed to the minuses, because it can crack and injure.

DVDs playing in the sun

Many video and audio lovers in the house often have a fairly large number of unnecessary discs that have already played their contents millions of times and have lost their freshness and quality. By combining them with a paper clip, wire or fishing line into a single canvas and fixing them on the base-pegs, you can give the flower bed an unusual, bright and shiny look in all respects.

The disadvantage of such an undertaking is only a short period of operation of this fence. For the rest, she can become original solution in landscape design of any site.

Plastic bottles - a flight for fantasy

Remaining after feasts can also be useful to the decorator of flower beds. Inserted like glass bottles, carefully painted in different colors, illuminate the green space with bright notes.

However, it is worth remembering that plastic is subject to deformation when the temperature changes, therefore, before directly inserting the bottles into the ground, it is worth carefully filling them with sand. Possible deformation, under the influence of weather conditions, is a minus of these fences.

Decorative fences enclosing your flower garden

Items such as an old fence, remnants of roof tiles or wall plastic, unused metal tape in a roll, Forged Products and other improvised material can be an interesting basis for creating a flower fence.

Their presence, in various configurations, will bring a touch of chaos and modern colors to the green ornament of plants, forcing the owners and guests of the summer cottage to look at the classic forms from a different angle.

A variety of design options for flower beds, at times, amazes the most experienced grower. wood, glass, stone chips, knitting, weaving and many other materials, reveal countless creative ideas owners of summer cottages and simply lovers of aesthetics and beauty.

Consider a few more ideas aimed at fencing for flower beds, which use improvised non-standard materials.

Stone border - a classic version of the fence flower beds in the country

The creation and design of flower beds is undoubtedly a fascinating creative activity, and the flight of fancy here is hardly limited to the usual forms and materials.

Creating, against the backdrop of favorite plants, an object of landscape art, each owner will be able to feel like the creator of something new, unusual, original. The main thing is a positive attitude and focus on a truly grandiose result.

Categories

Popular