The rapid development of heating technology has set increased requirements for chimney systems. After all, the result of the operation of heating boilers directly depends on the proper functioning of the chimney and its design features. To achieve these goals, special developments were carried out in this area. One of unique offers is the Schiedel UNI chimney system.

This universal option suitable for general use and any equipment. 3 layer construction made it possible to achieve excellent results operation of the chimney system ...

It seemed that we were forever away from chimney systems, especially in houses with more than one apartment. However, the rapid development of modern technologies in the direction of the organization individual heating continues in leaps and bounds. Significant cost savings and the desire for independence from universal centralization make owners think too apartment buildings. Today, the Schiedel QUADRO chimney system is an excellent option for organizing heating in such housing.

The Shidel chimney system was created taking into account the characteristics of gas boilers with closed system combustion chambers...

Aggressive impact environment not the most in the best way affects chimneys. Chimneys, chimney systems made brickwork, are destroyed by rain, from melting snow, and simply from exposure to smoke products. Ugly smudges inside the house and a crumbling pipe are a common picture for old houses. A solution has been found: the Schiedel KERANOVA ceramic chimney system is a reliable cure for this disease.

The Schiedel KERANOVA ceramic chimney system is a ceramic structure that is installed inside an existing brick chimney...

Organizing a properly functioning chimney for a condensing boiler is not an easy task. Nevertheless, it is this equipment, as the most powerful and reliable, that is widely used in commercial construction. The Schiedel MULTI ceramic chimney system shows the best results when working with condensing equipment.

This effect is achieved by the unique structure of the Schiedel MULTI flue system. Inside which is a ceramic chimney-pipe. It is through the ceramic chimney-pipe that the smoke leaves the space of the boiler...

Organization of a working chimney system - difficult task. The work of any heat generator can go down the drain if the chimney is made incorrectly or poorly. The rapid development of thermal equipment caused a reciprocal surge in the development of exhaust systems flue gases. One of the best options modern chimneys is considered a universal product: the Schiedel ICS chimney system.

The metal, steel Schiedel ICS system is designed as a two-circuit example of a chimney (chimney) structure. Inside the chimney and outside there is a pipe made of of stainless steel...

The organization of a chimney system for industrial thermal equipment requires a special approach. It can be difficult to get the desired result when working under excessive pressure. In addition, production conditions create additional destructive effects of gases, liquids, vapors on all structures. Double-circuit chimney systems Schiedel ICS 5000 (Shidel ITS 5000) showed best results in industrial applications.

Metal chimneys Schiedel ICS 5000 is a "sandwich" of external and internal stainless pipe and basalt filler between them...

A real live fire in the house creates a unique atmosphere. Modern development thermal equipment allows you to install a boiler, stove or fireplace almost anywhere. Together with these devices, proposals in the field of chimney systems are actively developing. Without their proper organization, it is impossible to achieve the desired effect of heat. The best choice chimney for a private house is the installation of a double-circuit version of Schiedel PERMETER.

Particular attention is drawn to the fact that the exterior color can be chosen according to desired color. This allows you to give the necessary appearance chimney system Shidel (Schiedel)...

Experienced homeowners know that laying down the stove, installing a fireplace, or putting in a boiler is only half the battle. Only the right chimney system will help to reach the required efficiency thermal equipment. And what to do if it was not originally intended to arrange real hearth with live fire? A solution has been found: Schiedel KERASTAR chimneys will help in this situation.

The Schiedel KERASTAR chimney system is an excellent piece of engineering. Installation is possible both in new construction and in an existing house ...

Have you noticed how quickly you get tired in an unventilated room? What a crowd unpleasant odors and moisture on all objects and things? All this in our climate, and so not indulging special conditions. But these are only external manifestations of bad work. ventilation system or its absence. pathogenic bacteria, fungal formations, dust mites just feel great in such stagnant air. The consequences of their life activity will have to be dealt with in cardinal ways.

for the human body correct operation 20,000 liters of air are required per day...

Ferrous metal chimneys with a thickness of 2 mm have a number of undeniable advantages. Their installation does not require any special foundation, because the structures are famous for their low weight. Inner surface unsurpassed smooth. So, such chimneys are extremely easy to maintain.

Metal chimneys perfectly withstand high loads, any temperature indicators up to 500 ° C. At the same time, they look stylish, concise, modern without any additional decoration. Also, they are incredibly versatile. Choose from a wide range of accessories!

Chimneys - how to choose the right one? Comparison various types chimneys.

Well, let's figure it out ... So, what does the concept of heating system safety include? it proper ventilation and removal of exhaust gases from the heating system, which is done correctly arranged chimneys.
Smoke, back draft and, finally, a fire - all this can happen as a result of an irresponsible attitude towards chimneys!
Therefore, when starting the design and construction of a heating system, very responsibly decide on the choice of a smoke exhaust system.

The chimney is designed to create a natural draft that removes combustion products from the combustion chamber. The efficiency and safety of the entire heating system directly depends on how well the chimney is made and what materials are used for its manufacture.
The next step is the question - for which heating system is the chimney. After all, for gas boiler or a Russian stove, various chimneys are needed. Modern chimneys must be strong and durable. They must withstand high temperatures of flue gases, provide smoke removal in modes low temperature exhaust gases, withstand the effects of condensate and aggressive acids, and also meet fire safety requirements.

Chimneys differ in design and in the materials from which they are made.

Chimneys according to the type of construction are divided into:

• single-circuit;
• double-circuit;
• modular.

According to the cross-sectional shape of the smoke channel, round, square and rectangular are distinguished. Round chimneys are more preferable, as they do not create additional obstacles to the smoke flow in the form of turbulent eddies, characteristic of square and rectangular ducts.
Single-circuit (non-insulated, single) chimneys- are a regular metal pipe. This is the simplest solution that does not require high costs. They are used for insertion into existing brick channels, ventilation of rooms. Installation of single chimneys in existing brick channels helps to reduce heat loss, increase draft and reduce the formation of condensate in chimneys. As a result, performance heater increases several times. But you can not place these chimneys outside the building - an uninsulated chimney will quickly cool down, which will lead to a decrease in draft, a decrease in boiler power, the likelihood of a gas "plug" in the smoke channel and, ultimately, poisoning with combustion products. It is possible to place such chimneys indoors, but only heated ones.
Double-circuit chimney systems, they are also insulated chimneys, they are also sandwich chimneys- are a structure consisting of two pipes of different diameters (external and internal), insulated with non-combustible heat-insulating material made of high quality basalt fiber. This design ensures fast heating. inner pipe, which, in turn, allows, in a short time after the start of work, to raise the temperature in the chimney above the “dew point” and avoid the formation of condensate with sulfur compounds that accelerate metal corrosion. Such chimneys perfectly withstand high temperatures and atmospheric influences, therefore, they are well suited for boilers, fireplaces and sauna stoves, although they are, respectively, more expensive than single ones.
Modular systems are pipes hermetically connected by elbows, tees, allowing you to mount the chimney in any direction, with bends and changes in diameter, depending on your requirements.

All chimneys can be classified according to the material from which they are made.

Chimney made of asbestos-cement pipe or brick

Most cheap option and the most flammable. Asbestos-cement pipes are not intended for chimneys at all. In addition, asbestos cement is a carcinogenic material, moreover, it is prone to cracking. But, unfortunately, such chimneys are still found. Tip: forget about asbestos-cement pipes once and for all! Learn from other people's mistakes, not your own, too much human lives paid for this cheapness!
BRICK CHIMNEYS are the most economical. The undoubted advantage of this solution is the low price, for their manufacture you only need water, sand, cement mortar, brick and a good stove-maker.
But brick chimneys are categorically not suitable for modern heating devices! And why? Yes, because a modern boiler is not a "potbelly stove", which had a very low efficiency and the temperature of the exhaust gases was very high, respectively, the chimney was red-hot and the "dew point" was formed outside the chimney. A modern boiler makes maximum use of the heat of combustion of fuel, respectively, has high efficiency. But since the temperature of the exhaust gases has dropped significantly, then the "dew point" has moved inside the chimney, which means that the formation of aggressive acids will occur inside chimney. What will happen to the brick chimney in this case? That's right, inevitable destruction awaits him, and, of course, in the near "joyful" perspective, his complete reorganization.
By the way, brick chimneys are far from always able to ensure the removal of smoke in modes of low temperature of exhaust gases. A brick chimney is heavy and requires a foundation; it must be built together with the building, and the unevenness of the chimney shaft contributes to increased soot deposition on its walls. Soot, interacting with condensate, creates an aggressive environment and destroys the chimney channel. Another obstacle to choosing a brick chimney may be the lack of a qualified stove-maker to create it. Plus, brick chimneys are inferior in strength and durability to steel chimneys, and transport and physical costs, as well as many days of dirt and debris in your house during its construction, negate all the advantages of this solution.
A brick chimney is more tolerant of wood and diesel boilers.
What about the use of gas in systems with brick chimneys?
Main gas is a mixture chemical elements, an integral part of which is sulfur. Water vapor is always present in the air supplied to the combustion chamber. During the combustion of gas, sulfur is oxidized, and, interacting with water vapor, forms as a result ... a solution of sulfuric acid! This solution, accumulating on the inner walls (condensate), is an aggressive environment and destroys a brick chimney within 2-5 years. The destruction time also depends on the sulfur content in the gas, on the boiler settings, the height and the chimney insulation scheme.
What is dew point? The dew point is the atmospheric conditions at which the water vapor contained in the combustion products of a fuel turns into water. In other words, water vapor turns into water before it leaves the chimney, and when mixed with other combustion products, it forms nothing more than sulfuric acid, with all the ensuing consequences for the chimney walls ... It is also possible that a water plug may appear in an unheated chimney, which stops the movement of gas through the chimney, and as a result, the automation turns off the boiler.

Steel chimney

Currently, as a material for chimneys are increasingly used metal pipes from heat-resistant stainless steel. Such chimneys have a number of advantages: they are much lighter than brick chimneys, do not require additional foundations, are easy to install, resistant to corrosion, durable and versatile. In addition, a steel chimney can be built into an already built house. Metal chimneys are quite widely represented on Russian market, and not only well-known foreign manufacturers but also domestic ones.
When choosing a stainless steel chimney, pay attention to the grade of steel used!
In the modern production of chimneys, such steel grades AISI 321, AISI 316, AISI 310, AISI 309, AISI 304, etc. are used. (marking European standard).
Heat-resistant steel grades AISI 309, AISI 310, as a rule, are used in the manufacture of chimneys for fireplaces, solid fuel boilers. Working temperature of such a chimney is 1000°C.
Austenitic chromium-nickel-molybdenum steel grade AISI 316 L of European production contains molybdenum and titanium, which increase corrosion resistance at high temperatures up to 800 ° C and are used in the production of BOFILL chimneys. They are not destroyed when exposed to aggressive flue gas condensate in conditions of high and low temperatures regardless of the type of heater and fuel. Of course, the cost of this steel significantly affects the price. finished product unlike ferritic steel (AISI 430) which is often used Russian manufacturers. But as they say, the miser pays twice...
The speed of movement of gas combustion products through the chimney is the most important indicator of the quality of the chimney. The friction force of flue gases with metal is several times less than the force of their friction with brickwork, respectively, the speed of gas movement along stainless steel chimney on average 1.5 times higher, which increases the efficiency of the boiler and avoids shifting the dew point down the chimney.

Fireclay or ceramic chimney

Not so long ago, chimney systems made of ceramic fireclay pipes in a shell of lightweight concrete or stainless steel German company SCHIEDEL.
To all the advantages of steel chimneys, high reliability and durability can be added to fireclay chimneys. The elements of such chimney systems consist of an internal fireclay pipe, an insulating layer based on basalt rocks and outer casing - lightweight foam concrete or stainless steel (Shiedel KERASTAR system).
Good for everyone, but ... The price of such chimneys and fare will be significantly higher, but it pays off with a period of their long-term operation. It is necessary to take into account the complexity, and even the impossibility of applying ceramic chimneys where required a large number of bends and turns of the chimney, because in fact a ceramic chimney is an upright "pillar" mounted from finished elements on the principle of the designer "Lego".

What chimney do you need?

The choice of a chimney depends not only on the material, but also on what this chimney will actually remove smoke from.

• Chimney for a gas boiler: must be made of acid-resistant materials - this special brands stainless steel, ceramic or polymer compounds.
• Chimney for the fireplace: when building chimneys for fireplaces, red is usually chosen kiln brick or ceramics, depending on how often you will use the fireplace and your budget.
• Sauna chimney: It is better to choose a chimney for a bath or sauna made of heat-resistant stainless steel, such as a sandwich chimney.

Chimneys must also be protected from precipitation and wind so that there is no back draft. This function is performed by nozzles "umbrellas".
Stainless steel nozzles of various configurations and purposes are currently in the greatest demand. I would especially like to draw your attention to the products of such a manufacturer of chimneys as F.F. Bofill (Spain). The company has established itself over a century of production (Joint-Stock Company F.F.BOFILL, S.A. was founded in 1880 in Spain) with a very highly reliable and high-quality product - these are single-walled and double-walled (with thermal insulation) chimneys made of stainless mirror steel, chimneys made of enameled (black) steel, double-walled (with thermal insulation) copper-plated chimneys, coaxial chimneys, accessories to them. Products are known all over the world and are in constant demand. Chimneys are certified in Russia and adapted to our climatic conditions. Bofill chimneys meet all functional requirements of chimneys:

• provision of traction;
• good thermal insulation;
• durability;
• aesthetic appeal;
• ease of installation and operation;
• Fire safety.
• Bofill chimneys are used to remove flue gases from boilers and geysers and are used for installation both inside buildings and outside.

What are the advantages of Bofill chimneys?

• The high quality of the materials used and modern technologies manufacturing, which made it possible to achieve High Quality products.
• Quite reasonable prices.
• Large nomenclature auxiliary elements, which allows you to implement the most daring projects.
• perfectly smooth, mirror surface provides excellent draft, does not create additional resistance to the exit of combustion products and does not contribute to the deposition of soot on the walls of the chimney.
• The threshold of condensate formation is overcome in a few minutes, which minimizes the impact of aggressive substances on the walls of the chimney.
• Pipes do not absorb combustion products.
• Light weight reduces the cost of transportation and simplifies the installation system.
• A variety of shaped modules allows the installation of Bofill chimneys of any configuration.
• Chimneys can be mounted in an already built house, as well as built into a ready-made brick chimney.
• Aesthetically, Bofill chimneys do not spoil the appearance of the building, being a nice design addition, and Bofill copper chimneys are just a super beautiful and rich appearance!

Bofill is by far the undisputed leader in the Russian chimney market, unmatched in quality.

The specialists of the company "Termogorod" Moscow will help you choose the right one, buy as well as install a chimney system find an affordable solution. Ask any questions you are interested in, telephone consultation is absolutely free, or use the form "Feedback"
You will be satisfied cooperating with us!

What can modern chimney production offer us? Why are stainless steel chimneys good and what are sandwich chimneys? What chimneys are on sale?

The fireplace is often called the heart of the home. Reliable source heat, the fireplace not only gives cozy warmth- it also gives the room that charming atmosphere home comfort, which will never be created by any, even the most modern, radiator central heating. That is why most owners choose a fireplace country houses approach with the utmost responsibility.

However, few of them think that the choice of a chimney is, in fact, an event no less important than the choice of the fireplace itself or heating furnace for home. About what chimneys are, how they differ from each other and what advantages they have over each other, we will consider in a number of separate articles.

Modern production provides the most different kinds air ducts. Stainless steel chimneys are perhaps the most widely used today. Modular stainless steel systems have many advantages, both functional and operational.

Functional benefits include excellent traction and high corrosion resistance. From an operational point of view, metal modular systems are easy to maintain, have a small mass, and are easy to mount; smoke exhausters are easily installed on iron chimneys. In addition, steel chimneys are easy to match to any type of stove or fireplace: a wide range of pipes of various configurations with a variety of shaped elements allows you to satisfy any request.
chimneys chimneys-sandwich

Chimneys made of stainless steel can be single-circuit and double-circuit, the latter are known as sandwich chimneys. Single-circuit gas ducts are usually used in heated rooms, for connecting heating system to an existing chimney, as well as to improve the condition of old brick pipes. For their manufacture, special steel with resistance to high temperatures is used.

Modern production of chimneys also provides special modular systems made of stainless steel - flexible single-walled and double-walled corrugated sleeves, they are used to modernize old brick pipes, as well as when laying in areas of complex configuration.

Chimneys made of stainless steel can be equipped with special additional coatings. So, for example, there are chimneys made of galvanized steel on sale - galvanized modular systems are considered more stable.

Sandwich chimneys are two pipes nested one inside the other with a heat-resistant layer. It's ready constructive solution, which can be used to install a chimney pipe both inside the building and outside. Smoke exhausters are easily installed on such gas ducts. Sandwich chimneys are usually equipped with a stainless steel casing, polished to a mirror finish. However modern manufacturing chimneys are constantly evolving, so some manufacturers also offer enamel painting in any desired color. The thermal insulation layer solves several problems at once: keeps the temperature of the inner pipe below the dew point, keeps the temperature external environment at a fireproof level and does not allow the flue gases to become supercooled. Due to their obvious advantages, sandwich chimneys are especially in demand today.
ceramic chimney
ceramic chimneys

When choosing, one should take into account important characteristic chimney system as gas tightness. The production of chimneys provides the most various options design of pipe joints, however, most often a stainless steel chimney is mounted traditional way. Usually, double-circuit gas ducts are mounted in such a way that the upper module is put on the lower one, and single-circuit ones, on the contrary, so that condensate does not flow through the joints.

To enhance the draft in the chimney, smoke exhausters are often installed on chimneys - electric heat-resistant fans.

Price. The sale of stainless steel chimneys is carried out at quite affordable prices, so buy one modular system won't be difficult. Our prices for chimneys are very different and depend on the manufacturer, type of system, etc. - contact our consultants and we will send a detailed price list for the products.

attractive low price sales and low maintenance are the decisive factors, due to which more and more buyers choose a stainless steel chimney. Even insulated pipes with thermal insulation (sandwich chimney) are not much more expensive than without it.

We carry out the production and sale of chimneys, their delivery and installation in Moscow and the Moscow region, covering the following cities: Istra, Krasnogorsk, Dedovsk, Dolgoprudny, Dubna, Kolomna, Korolev, Orekhovo-Zuevo, Podolsk, Pushchino, Sergiev Posad, Serpukhov, Chernogolovka, Schelkovo, Nakhabino, Zelenograd, Zvenigorod, Khimki, Solnechnogorsk, Dmitrov, Klin, Lobnya, Dolgoprudny, Odintsovo, Vnukovo, Volokolamsk, Mozhaisk, Ruza, Skhodnya.

Schiedel ceramic chimneys are durable, compact, easy to maintain and install. Feature of ceramic pipes - in their functionality. They work perfectly on boilers of any modification, on any type of fuel - from gas to fuel oil, and have a guarantee of up to 30 years. Equipped with a special ventilation system and have a long service life.

Steel chimneys (product information)

Chimneys made of steel are resistant to high temperatures, aggressive effects chemical substances and corrosion. They are versatile and practical, can be used for heating with fuel oil, wood and coal. Chimneys made of Schiedel steel are especially popular due to their aesthetics, efficiency and safety in operation.

Right choice chimney - a prerequisite for safe and reliable operation stove or fireplace in the house. Modern chimneys are made from various materials and differ in a variety of designs. The main criteria for choosing a chimney system are the design features of a fireplace or stove, their power and location. Today, boilers, stoves and fireplaces of the latest generation are very popular, which require special attention and a carefully thought-out approach. So for them ideal solution there will be innovative chimney systems made of ceramic or steel that you can buy at favorable prices at Euromet.

Steel chimneys are light and easy to install, compact in size and versatile - they can be used with any type of furnaces and boilers.

The peculiarity of ceramic chimneys is their resistance to high temperatures and sudden temperature changes, durability and ability to accumulate heat. The manufacturer guarantees a long service life of ceramic chimneys - for 30 years.

SHIEDEL is one of the market leaders in chimney systems and sells its products in many countries around the world. Innovation, functionality, aesthetics, adequate cost - chimneys from SHIEDEL are comfortable and easy to use.

QUADRO system

The new Schiedel Quadro gas-to-air (LAS) chimney system will secure your future!

The possibility of using individual heating from a gas boiler in an apartment building has many advantages compared to centralized heating. The consumer receives heat at any time and without any restrictions and regulates it individually. This is also a good prerequisite for optimal energy use and environmental protection. In addition, it becomes possible to accurately determine the energy consumption of each apartment and individually calculate for it. Disagreements between building management, tenants and owners are eliminated.When installing boilers that operate without the use of room air, there is no need to organize additional air supply to the furnace, so there are no problems of fuel combustion associated with the presence in the house modern windows and lack of combustion air.

OF COURSE:
Boilers, stoves and fireplaces need air - plenty of air.
The Schiedel Quadro, a specially designed flue system, not only delivers this air to the combustion site, but at the same time takes care of the reliable and safe removal combustion products. The organization of the supply of combustion air to several consumers at once and the removal of the resulting flue gases using the Quadro system also saves space.

Schiedel Quadro meets all requirements for air-to-air (LAS) systems. From base to mouth, this system combines all the advantages of a modern, flexible, reliable system.

Four decisive advantages of the Schiedel QUADRO (LAS) system

	Hassle-free installation. Stone shells are practical: they have small size and weight. Thanks to spacers, the inner ceramic pipe is easily centered inside the stone shell.
	Various connectivity options. The geometry of the stone shell allows connection from all four sides. This means that up to four chimneys can be connected on each floor, and up to 10 consumers in total can be connected to the chimney. Ceramic elements, used to connect the boiler, are mounted using conventional building tools. These elements are connected to the main smoke channel using Schiedel sealant, which ensures the gas tightness of the structure.
	Energy saving. Where there used to be a separate ventilation shaft, there is now a structure in which the heat exchange process operates: cold air, which moves in the outer concentric channel, is heated by flue gases on its way down to the furnace. This allows for additional energy savings.
	Static security. It is always important where the chimney extends far beyond the roof. In this case, special fastening sets can be used in the four channels for fittings, with the help of which the chimney is additionally fixed. This allows you to freely place the chimney anywhere inside the building.

The Schiedel QUADRO system is optimized with all standard programs. Using only four types of stone shells, it is possible to mount a ceramic pipe inside seven various diameters. At the same time, all the requirements for the system for fire, heat and sound protection are met. Additional lining is not required to improve thermal insulation. The system is ideal for connecting condensing boilers.High quality ceramic pipe and integrated solutions for the top of the chimney.

Robust inner ceramic tube resistant to impact high temperature and temperature fluctuations, acid-resistant at high density and strength. The pipe and connection elements are particularly easy to install. cover plate, protection plate, protective grid, the cone with cladding are included in the chimney top mounting kit and represent a complete solution both optically and functionally. The outer shell of the upper part of the chimney is firmly connected to the stone shell thanks to new system installation.

	cross section cm	vendor code	Outer the size cm	Weight approx. kg/pm
		Q14	36/36	95
		Q16	36/36	100
		Q18	40/40	115
		Q20	40/40	120
		Q22	48/48	140
		Q25	48/48	155
		Q30	55/55	190