How to join a countertop. How to make a corner tabletop? Connection of kitchen worktops using eurosaw.

• Completion of the installation process

In the course of the repair work most landlords in addition to replacement finishing materials choose for your home new furniture. And often, in order for everything to end up in its place, the furniture has to be slightly modified. This problem is very often kitchen worktops.

For example, in the case of a corner kitchen. If you do not want to use the services of furniture assemblers, then this species you have to do the work yourself. Let us consider in detail how the countertops are connected and their correct installation.

Should you install a countertop?

If you understand in advance how to connect the countertop and how to assemble it, then, of course, you can carry out all the work yourself. If you do not have such experience, it is best to resort to the help of professionals. Otherwise, there is a risk of damaging the product.

1. If you have experience, you can install such structures on your own from materials such as chipboard, MDF, and also from wood, since the listed materials are easy to process and no special tools are required during the connection and installation process.
2. If your plans include installing a stone or tile system, then again, with experience, you can install and connect it yourself. In most cases, "home-made" devices have a longer service life than custom-made products.
3. It is not recommended to mount and connect the countertop yourself if it is made of expensive material.
4. Do you have experience in this type of work? Don't take risks.
5. If the installation of the countertop is included in the cost of installing the kitchen set, then everything is fine. The masters themselves will install everything for you.

So, you can install and connect this product both independently and with the help of professional assemblers. It's up to you to decide.

Back to index

How to connect the countertop: the nuances

Separately, it must be said about what the countertop connections should be and how to protect them from moisture. In fact, this question arises quite often among people who purchase non-standard kitchen sets. It is possible to avoid joining the countertop only when its surface goes along a single straight line.

It is necessary to understand that the term of its operation and, of course, an attractive appearance directly depend on how well the countertop is connected.

Before proceeding with the connection of the countertop, it is necessary to set all bottom cabinets as they will be placed later. It is important to check them for evenness. There must be a special level for this.

In addition to everything listed on each locker there are legs that can be adjusted to the required height. IN corner cabinet mounting brackets must be screwed on and all required holes. In the cabinets adjacent to it, holes must also be present, through which the countertop will subsequently be attached.

It is important to review all the available parts that come with the countertop and kitchen unit.

In most cases, you will find there three fragments and strips of aluminum, having a T-section, which have holes for the screws.

After that, you need to combine the side ends of the countertop with the ends of the cabinets. In this case, the T-bars must be inserted. If the countertop does not lie close to the wall and it was created taking into account the curvature of the walls, it needs to be cut a little.

Then fix the corner piece of the countertop to the cabinet. This must be done from inside the cabinet. In order for the subsequent connections of the countertops to be reliable, it is best to carry out this work together. This is due to the fact that while one will fasten, the other should strongly press the countertop against the cabinet.

After that, you need to fix the T-shaped strips at the junction of the remaining part. The ending of the plank, which must match the outer rounded edge of the countertop, needs to be additional processing. This means that the hard rib must be removed so that the end of the plank will then smoothly wrap around the outer edge of the countertop. After that, carefully lower the screw. Check if it sticks out. If, nevertheless, his hat sticks out, then increase the hole to correct the situation.

If you have started a large-scale redevelopment of the kitchen, and want to make the most of the area you have, then one of the most good decisions there will be a choice of corner furniture layout. And for such a headset, we will definitely need a corner worktop for the kitchen - and in this article we will talk about the nuances of choosing and self-manufacturing similar structures.

Corner countertops allow you to use every centimeter of usable space

Features of corner worktops

In kitchens of a small area, literally every square centimeter counts. That is why many experts in the field consider optimal installation in such small kitchens precisely the corner sets. So the space is used more rationally, and free space it turns out more.

Exactly corner set, as well as the countertop are considered best solution for small kitchens

Advantages

First, let's look at what the installation of a corner tabletop will give you. There are several advantages to such a solution.

• Ergonomic and space saving. Indeed, in the kitchen, the work surface of which has the shape of the letter "G", it is very easy to perform a wide variety of operations. At the same time, it is enough to take a position in the corner - and you can easily reach the farthest corners of the tabletop. In addition, you fully use the corner of the room, which is so important in small kitchens.

L-shaped arrangement allows you to use the corner of the kitchen

• Functionality. Modern designs kitchen modules allow you to place many more drawers under the corner worktop than under the straight line. And if you also make it angular wall cabinet– then the gain will be enormous.
• Work surface division. The corner tabletop visually seems to divide working area into two areas. On one, for example, cutting or slicing of products can be performed, and on the second longer one, serving ready meals.

Corner top visually divides the work area into two halves

This advantage is most pronounced when two people work in the kitchen.
There is no need to push and demarcate work areas - just sit on the corresponding "wings" of the table top.

The main disadvantage corner location headset can be considered its distance from the window. But to solve this problem is very simple - it is enough to equip upper cabinets high-quality backlight headset.

Good illumination solves the problem of poor illumination of the work area

Worktop classification

There are several options for the layout of countertops for corner kitchens that you can use in the arrangement process.

• Monolithic. Most the best way, in which the coating is a single canvas. At the same time, there are no joints between the segments of the top, which guarantees the absence of leakage and moisture falling inside the kitchen modules.

Monolithic surface without joints prevents moisture from entering the headset

• Two piece worktops. Perhaps this is the most common type of coating. As a rule, such structures are shaped like the letter “L”, and their parts differ in size. The longer part has a length of 600 mm, and the shorter one has a length of 40-450 mm. In most cases, the short part is placed near the wall in which the door to the kitchen is located. For this reason, one of the corners of this part of the countertop is made rounded.

In most cases, the two parts of the top have different lengths.

• Three-piece worktops. They include an additional corner element (see photo) connecting two straight sections of the table top. corner element it can be both symmetrical and asymmetrical, and its front part can be either straight or rounded. As a rule, such a semicircular kitchen worktop is used in conjunction with curved facades from MDF.

The corner element can be either symmetrical or asymmetrical

Popular materials

Corner tops can be made from various materials from different characteristics and cost. Let's dwell on this moment in more detail.

• Chipboard. The most economical, at the same time quite light and durable option. During the manufacturing process, raw materials are processed special composition, which allows to increase the thermal and moisture resistance of the product. For decoration particle boards use a laminated film, which can qualitatively imitate enamel, wood, stone texture.

The price of chipboard products is the lowest among analogues

• MDF. More expensive than chipboard, but superior to it in terms of environmental friendliness. Material is different high strength, reliability and undemanding maintenance. Laminated MDF panels require very high quality corner connection- otherwise, there is a risk of moisture penetrating inside the table top plate itself, and as a result - its swelling.

MDF is a durable and environmentally friendly material

For connection, special corner strips, which are additionally sealed using silicone or polyurethane.

• Fake diamond. It can be an agglomerate material, which contains a large percentage of natural stone chips, or acrylic stone, which consists of acrylic resins. Tabletop from artificial stone will serve you for many years, it is not afraid of moisture or high temperatures.

Worktops for corner kitchen of stone easily tolerates high humidity and high temperatures

• A natural stone. Option for those who prefer high quality, naturalness and luxury. One of the most expensive materials but also one of the most effective. Most often, granite and quartz are used to make the top.

Natural stone is one of the most expensive and spectacular coatings.

• Wood. natural, eco pure material, which even without additional decor looks amazing. Special impregnations increase the water-repellent properties of wood. Please note, however, that from time to time the coating will have to be re-treated with special compounds.

The tabletop for the corner kitchen made of wood needs periodic treatment with special impregnations.

Making your own concrete countertop

Prices for countertops are growing by leaps and bounds, so many people have a question about whether it is possible to make a top for a headset with your own hands. Of course you can, and in this section you will learn how.

You can create a concrete pavement with your own hands without special skills in construction

Preparation of materials

Before you engage in the purchase of materials and directly finishing works, you need to measure the headset. Based on them, you can draw an approximate sketch of the future product.

Rough sketch of a corner top

As for materials, for work you will need:

• formwork boards;
• aluminum or plastic profile;
• polystyrene foam sheet with a thickness of not more than 5.5 cm;
• fittings;
• crushed stone, sand and cement;
• concrete plasticizer.

In addition, you need to take care of the following tools:

• grinders;
• drill driver;
• hacksaws or electric jigsaw;
• trowel and spatula.

Master class on creating a concrete countertop in 5 steps

When all necessary tools and materials are collected, you can proceed directly to the creation of a cover for the headset.

Illustration	Instructions for action
	Step 1. Formwork creation. Attach the sides of the structure to a piece of perfectly flat board or plywood. To do this, use bars with a section of 40x40 or 50x50. Attach a polystyrene foam sheet to the sides with self-tapping screws, lubricate it with drying oil or machine oil so that concrete does not stick to it in the future.
	Step 2. Reinforcement. After installing the formwork, you will need to lay the reinforcement mesh. For this purpose, a grid of wire rod with a thickness of about 6-10 mm and a mesh size of 5 cm is suitable. The grid must be laid out on plastic or metal supports with a height of 2 cm or more. The distance to the edge of the formwork should not be less than a centimeter.
	Step 3. Solution preparation. Mix one part of cement with two parts of sand and the same amount of gravel. Gradually add water to the mixture until the consistency of thick sour cream is formed. Mixing is carried out using a special mixer or an electric drill at low speed. At this stage, if desired, you can add a pigment for concrete.
	Step 4. Filling the solution. Pour the prepared solution into the formwork and level it with a spatula. Cover the structure with polyethylene for a day. Then remove it and apply a wet cloth to the composition (it will prevent cracks). After the final solidification of the solution, the formwork can be dismantled.
	Step 5 Sanding. With help grinder and a coarse-grained wheel, grind the surface. Then use medium and fine grain circles. Finally, attach a piece of suede cloth to the grinder and apply a special paste to it, which will give concrete pavement marble texture. And go over the surface with a filler, which can be purchased at any hardware store.

Using this technology, you can make a countertop of almost any shape - while there will not be a single seam on it. You can follow the process of creating such a design in detail in the video.

Finally

Corner worktop - a convenient and practical design, with which you can most effectively equip the corner of the kitchen. In addition, as you could see from our material, it is quite possible to make it yourself. By resorting to our instructions, you can create a coating that is in no way inferior in quality to purchased products.