Assembling a shower cabin 90x90 with a high tray. Assembling a shower cabin with your own hands: an independent step-by-step assembly of shower cabins. Unpacking items before assembly

Shower cabins today are increasingly replacing the usual baths. If there is really little space, then a bath is an unaffordable luxury. Mounting a compact cabin is much easier, cheaper and more practical than installing a bathtub.

If you assembled a shower cabin with your own hands, you can save a lot, right? Moreover, the work is not particularly difficult.

We will help you choose the best option plumbing fixture and correctly install it. The article provides step-by-step instruction on installation, as well as the specifics of the work performed when connecting different models shower cubicles.

Before proceeding directly to the description of the assembly process, we will briefly consider the main types of shower stalls available for sale, and the main criteria for their selection.

The shower area is simple design from the pallet and curtains. Instead of the walls that are typical for a full-fledged shower stall, the walls of the room are used. Ceiling at shower enclosure no. Its main advantages are low cost and compactness.

Shower enclosure - one of the simplest, most convenient and cheapest models of shower cabins, takes up minimal space and is suitable for self-assembly

More "fancy" models have a roof and walls. Expensive multifunctional units have rich technical equipment: Turkish bath or sharko shower, flavored steam mode, different types hydromassage, additional functions, various lighting.

An expensive model of a shower cabin with a hydromassage function, lighting and a deep tray. Requires not only sufficient space for installation, but also the necessary pressure in the water supply

The management of such cabins is carried out by a complex electronic system. Before buying an expensive cabin equipped with a hydromassage function, you first need to find out the level of water pressure in the pipes.

Combined showers are a kind of compromise for those who like to take a bath with a hydromassage and have a full-fledged shower at home. Combined models distinguishes original and stylish design– on the market they are often positioned as home SPA centers.

It is to the pallet that the products impose increased requirements. Quality pallet must withstand a large load, and at the maximum allowable weight the user will not crack, bend or deform.

Shower trays are made from different materials.

What are curtains?

The second most important element is the cabin curtains, which can be hinged and sliding. Hinged doors require more space. They are single-sided and double-sided.

As for sliding curtains, they have from two to six wings, which are held by a rubber magnetic tape. The curtains move on rollers hidden inside the frame of the shower cabin. High-quality curtains should open and close almost silently.

Corner shower cubicle with sliding doors. In addition to models with transparent plastic(glass) there are options with frosted curtains

Shower curtains are made of polystyrene or high quality tempered glass. Products made of polystyrene are quite cheap and have a small weight, but they quickly lose their transparency, stains remain on them.

Glass curtains are expensive high-quality products.

Hinged doors made of tempered frosted glass. In their manufacture, specially processed safety glass is used, which surpasses even automotive glass in strength.

Water and dirt are very easily washed off the glass surface - the material does not absorb anything and does not fade over the years. You can also buy a booth with curtains made of classic transparent, tinted, colored and rough glass.

Do-it-yourself step-by-step installation of a shower cabin

How to correctly assemble a shower cabin according to all the rules without critical errors that will affect the functionality of the structure? This is quite possible and not even very difficult if you strictly follow the instructions and follow the rules for installing this sanitary ware.

It is difficult to assemble a shower stall from scratch if you have to work in a limited space, so all manipulations must be carried out slowly, in several stages, with additional assembly and adjustment of the finished structure.

This approach allows you to get by with only one pair of working hands, while professionals almost always work together to save time.

The home master, who decides to independently assemble and connect the shower tray, will have to perform a number of standard actions:

Image gallery

Preparing for a quality build

A complete set of accessories is required. Before buying, you should carefully check the availability of all parts and their quality. If defects, damage and size discrepancies are found, it is necessary to demand a replacement part or refuse to purchase the selected model.

Also, for the assembly and installation of a shower cabin with your own hands, you will need a prepared place.

Set of tools:

drill, and better screwdriver on the battery;
drills for metal (6 and 3 mm), bits for self-tapping screws;
building level (for regulating the pallet relative to the floor);
curly and flat screwdrivers;
adjustable wrench or a set of keys of the desired size;
fum tape or tow;
sealant for sealing joints.

If the kit does not include hoses for connecting hot and cold water, they should also be taken care of in advance.

Cabin installation: work procedure

On the preparatory stage work, a working platform is selected, where, in fact, the booth will be assembled. It should be noted that many models are large, so it is recommended to assemble individual units in another room adjacent to the bathroom.

Preparation of a place for installation of a shower cabin. Important Requirements: connected communications (water supply and sewerage pipes), even base, waterproofing

All tools must be located so that they can be easily reached during work. You can assemble the booth on your own, but it is still strongly recommended to do it together, since at certain stages of the assembly, exact matching of some parts is required.

The walls adjacent to the booth and the floor must be even, without drops. You should start with . For pallets made of acrylic, the joint is treated with a transparent sealant.

First of all, you need to install a drain for dirty water. In another way, it is called "trap". In plumbing stores - a variety of models that differ in shape and size

The next stage is the installation of a steel profile structure on the bottom. Studs for legs will be installed on this frame a little later.

This is what the frame for the corner shower looks like. Bricks or concrete structures made of cement mortar do it yourself

Acrylic shower tray with screwed-in studs and one finished center leg. The studs are arranged so that the weight of the structure is evenly distributed over the entire area.

The short part of the frame has a special rigidly welded nut, which is needed for mounting the central leg. After the leg is screwed in, a nut is installed, after it a lock washer, then another nut.

We install all the other legs on the studs, after which the pallet can be moved to the installation site and leveled evenly using a level.

For deep bath trays, a more or less even horizontal line will suffice, but small trays must be set strictly according to the instructions, adhering to the indicated angles of inclination.

After half an hour, we carefully inspect the pan in order to detect leaks and microcracks. Then finally tighten all the nuts, fix their position. We connect the pallet with the drain system with a flexible hose.

Connecting the drain to the shower tray. Pay attention to the gap between the bottom of the product and the floor - it should be enough for laying and possible repair communications

Now you can proceed with the assembly of the walls, curtains and the installation of all other equipment, in particular, the assembly of the frame. To prevent corrosion, frames are most often made of aluminum. Each side of the frame, depending on the type of cabin, is assembled separately.

All joints from the outside are recommended to be treated with an acrylic-based sealant. For internal joints, it is better to use a colorless sanitary sealant. Almost all fasteners inexpensive models are made using self-tapping screws for metal.

For greater strength and durability of connections, it is recommended to replace self-tapping screws with M5 bolts, nuts and washers. All fasteners do not need to be immediately clamped to the stop - this is done only after installation.

The fasteners are finally fixed after all the elements of the shower cabin have been tested for functionality. After that, you can seal all the seams, joints and proceed with the assembly frame profiles.

As you can see, the installation and assembly of the shower cabin can be done by hand. However, before starting installation, you must definitely read the instructions and think over the procedure for carrying out the work.

Features of mounting different models

Each type of construction has its own characteristics, which should be considered during the installation process.

The nuances of installing open booths

Since the design of the booths open type quite simple and consists of a single aluminum frame, assembly usually does not cause much difficulty. Having assembled the aluminum frame, they immediately proceed to its installation on the pallet.

So that the cabin does not stagger or tip over during operation, almost all open-type models are attached to the walls with a transition profile in a vertical position

The end of the aluminum frame is attached to the transition profile wing with fasteners or special latches. All seams at the joints are treated with sealant. Once the frame is securely attached to the wall, the blind transparent elements are mounted.

The kit must include special fastening clips that are needed to fix the blind glass in the frame of the shower cabin.

The glass is fixed by pressing it firmly against the frame and fixing it with clips, but not too tight so that it does not crack. In open models of booths, sliding doors are most often provided. There are special rollers on the door frame. They are installed in the lower and upper guide grooves.

The specifics of the installation depends on the type of door construction. In order for the sashes to tightly adjoin each other, a magnetic plastic overlay is installed on their outer ends.

Assembly of closed structures

This option is almost identical to the technique described above, but with some minor differences.

The walls of the shower stall are assembled separately and attached to the pallet in a ready-made, assembled. Attached first rear walls cabins in which the jets for hydromassage are located, and only after that the front part is installed.

Multifunctional shower cubicle closed type. Once the back of the booth is in place, connect the hydromassage equipment to the water supply and power supply.

During the installation process, they adhere to safety regulations and connect the flexible hoses of the booth to the hot and cold water supply system with the highest quality.

In closed models, blind parts are installed differently front panel. Most often, additional aluminum profile parts are used for this.

For installation, the sheet is applied to the edge of the frame, the location of the reinforcing profile fastening is marked, which simultaneously plays the role of a stiffener for the entire structure.

Then, with a drill or a screwdriver, holes are made for bolts or self-tapping screws, the profile is pressed tightly against the glass and fastened to the frame. They seal all seams and joints, check the elements of the shower stall for functionality, and then install decorative panel(apron) on a pallet.

Remember that you need to focus on the instructions and the diagram for assembling the shower cabin.

Installation of corner views is simple and takes a little time, however, for proper assembly, you need to know some nuances, for example, the proportionality of the angular distance of the walls (+)

Before starting installation, make sure that the distance between the walls is at different height the same. The frame of the corner booth is very rigid, and after installation all the irregularities of the wall will be visible under the frame, in addition, water will enter the room through the cracks.

If you try to pull the frame closer to the wall, it may deform, after which it will not be possible to install the doors and blind parts of the booth.

Image gallery

The quality of the assembly of the pallet depends on the performance of further work, since it serves as a guide and supporting structure for frame

If the horizontal position was violated during the installation of the pallet, then the booth will warp and it will be impossible to put the curtains

Before attaching the metal frame of the shower stall, you should once again carefully check the horizontals with the verticals

If the work with the pallet was performed flawlessly, then the booth is assembled in half an hour, the curtains are installed without gaps and distortions, the upper trim is fixed without effort

The technology of mounting reinforced metal models requires a special approach and the creation of a reliable foundation.

Conclusions and useful video on the topic

You can learn more about assembling shower enclosures by watching the following videos.

Accessible and fast about all stages of assembly:

The subtleties of installing a shower cabin "Lisa":

As you can see, assembling a shower stall is nothing particularly difficult, with the exception of installing fancy models with rich functionality.

Do not forget to check all the details again for operability. Most likely, you will need to rewind, tighten and screw something else, but the installation experience gained will be very useful if you need to change or repair the shower stall.

Shower cabin assembly necessary work for the device of optimal and practical solution for the bathroom.

The shower cabin is convenient for its compact size.

Often such equipment is installed in large bathrooms as additional equipment.

Assembling a shower stall on your own is not difficult, just follow the instructions strictly.

Acquisition is a hot topic today, as in the conditions small bathrooms standard apartments, this solution allows you to optimize and save space.

This article presents a shower cabin assembly diagram, as well as video instructions and various options placement and design.

In most cases, shower cubicles in the form of a corner are used in the installation.

Such systems are similar to each other and include:

roof;
pallet;
side and back panels;
doors and factory racks;
apron and "skirt" of the pallet.

Preparatory stage

The procedure for installing a shower stall involves a combination of various activities that require certain knowledge and patience.

For a smooth installation of the equipment, it is necessary to treat the surface and isolate all plumbing communications.

For assembly work, you must purchase the necessary tools and materials:

wrench;
screwdrivers;
electric drill;
washers, bolts;
silicone sealant;
fittings, pipes, hoses and siphon;
knives;
paint and brushes;
building level, tape measure, marker and more.

When choosing the booth model itself, you need to find out from the seller everything important details: assembly features, operating pressure indicator, are there any requirements for electrical wiring, water supply system, etc.

Before starting work, you should make sure that the siphon reaches the sewer drain and how well it is made.

The wires should be free to reach a waterproof outlet, without being stretched.

Pallet installation

Assembling a shower cabin with your own hands begins with the installation of a pallet, which is an acrylic container with a metal cross bolted to it.

Usually all pallets have special legs that must be set with a level and strengthened with nuts.

The installation instructions regulate the installation of the shower legs strictly in one plane in order to prevent the tray from swaying or sagging of one of the legs.

In advance, you should install a tee for several outlets, with which you can connect a bath, washbasin and washing machine.

If in the bathroom, in addition to the shower, it is also supposed to use a bath, then this must be agreed with the specialized authorities and changes should be made to the BTI plan in order to be able to arrange an additional water point.

In addition, it is necessary to check the strength of the connecting gasket: if it is in doubt, then a moisture-resistant sealant will be required.

The pallet is installed in a corner so that it fits snugly against the walls, eliminating the formation of gaps. The section contains detailed video instruction for pallet assembly.

Frame and walls

The cabin frame is assembled from uprights and two arcs that provide movement of the cabin doors. Two vertical guides are screwed to the outer edges.

They are attached using the screws and dowels that come with the kit.

Holes in the wall intended for the installation of guides must be sealed with silicone along the contour of its installation.

Inserting glass is not difficult, as they have a special edge.

The further scheme provides for the following activities:

with self-tapping screws, the stand is connected to the arch;
the pallet is connected to the panels;
silicone lubricates the joints between the booth and the rear walls.

Installation of the roof and cabin doors

Attention should be paid to the established minimum gap between the roof and ceiling. Such a distance, equal to 25-30 cm, will be needed for installation and further provision of the cabin.

Installation of watering cans, lighting and speakers is carried out before fixing the roof. The joints between the attachment of equipment and the roof should also be treated with a sealant.

The roof is attached with self-tapping screws in the places that the scheme provides, for this it is necessary to make additional holes in the roof, in addition to those that already exist.

Cabin doors are mounted after the pallet, frame and roof are installed. Before installing the doors, it is necessary to fix the rollers on them and put on the seals.

After that, the rollers must be adjusted so that the doors are perfectly connected to each other, eliminating the possibility of moisture passing through.

Plumbing and power supply device

Before installing the siphon, you should make sure that it is of good quality.

Most often, manufacturers are trying to save money on the siphon, so, for sure, you will have to purchase a new, higher-quality element.

After one end of the drain hose is attached to the pan, and the other to the drain hole, it is necessary to drain the water and check for leaks.

When supplying water, it should be remembered that the operating pressure of the cabin is in the range from 1.5 to 4 bar, which must correspond to the pressure in the water pipe.

As a rule, existing modern market models of shower cabins have a variety of options that require electrical supply.

The video below shows instructions that show how to install a shower cabin.

For the shower, you will need a special outlet, adapted specifically for rooms with high humidity.

The procedure for assembling the shower stall ends with the installation of the so-called "skirt" on the pallet.

Before you start operating the shower stall, you need to make sure that the joints are sealed and there are no leaks anywhere.

Even if the cabin is completely sealed, the bathroom must have a ventilation system.

Shower cabins of the brands Serena and Niagara, installation features

Shower cabins of the Serena and Niagara brands belong to the middle price segment and offer various acrylic, polymer or glass models of larger and smaller sizes, which mainly have a deep tray.

Such cabins, which are full-fledged small-sized shower rooms, include:

walls and ceiling;
rain shower and a stand for the main watering can;
hydromassage;
shelves;
convenient drain blocker.

Serena shower cabins have rightfully won recognition from consumers due to their high functionality and ergonomics.

The scheme provides for the assembly of the cabin as part of the panel, wall, roof and main elements.

After attaching all the components, additional functions should be checked, such as radio, backlight, ventilation system etc.

Mounting areas made with regular self-tapping screws are treated with silicone sealant.

Assembling a shower cabin with your own hands ends with the launch and verification of the entire system.

When purchasing such a cab, an additional mounting kit must be purchased.

Differences between mounting the Serena booth from standard options begin at the stage of assembling the side walls and doors, which are installed on factory racks fixed to the floor.

It is important to observe the angles between the pallet and the walls.

Doors that are mounted on final stage, have a unique sliding system, special hinges that provide opening and closing.

Everything today more people moving from bulky and impractical bathtubs to lightweight and compact shower enclosures that replace and even outperform old-fashioned bathtubs in many ways, and also save space in small bathrooms. If you also experienced the advantages and benefits of such a bathing facility as a shower cabin, then this article will tell you how to quickly and correctly assemble and connect this modern unit to all communications on your own. So, let's figure it out.

Tools and materials

As soon as you have chosen and purchased a new thing for your bathroom, and the delivery service has brought the components into the apartment, you should carefully inspect all the details for mechanical damage. Glass surfaces require special attention.

If you did not find such damage, then you can safely sign the delivery certificate, pay for the purchase and begin the installation process.

To start assembly operations You need to take inventory of your tools. Make sure everything you need is close at hand. Required fixtures include:

adjustable wrench (Swedish);
a screwdriver with a Phillips bit or a similar screwdriver;
drill of small diameter;
silicone squeezing gun;
a small flat screwdriver (it is needed when tightening the small bolts in the faucet levers).

In addition to tools, you should also prepare some auxiliary materials necessary for the quality performance of the task. So, you need to prepare:

silicone antibacterial transparent;
two hoses of 1.5 meters;
transition to sewerage with a diameter of 32/50;

When all the necessary tools and auxiliary materials have been prepared, and the tested and purchased components of the bathing unit are ready for assembly, the installation process can begin.

The assembly of the shower cabin begins with a pallet.

Find among a large number boxes with signatures pasted on them packed shower tray. Unpack the cardboard container and inspect its contents. In addition to the presence of the pallet itself, a number of other structural elements should be inside it:

pallet apron;
metal frame from a profile for a pallet;
studs, on the basis of which the legs will be attached;
brackets for fitting an apron;
many nuts and washers;
screws and siphon.

In the event that you could not find all these elements in a container with a pallet, it means that the manufacturers packed them in a separate box. The next step is to deploy and remove the protective film coating from the pallet.
The frame, on which, in fact, the entire shower cabin will stand, may be in a ready-made, assembled form, or may be in disparate parts. If your equipment has not yet been mounted, then you should twist the support manually.

To do this, find the frame itself and lay it on top of the pallet, combining the attachment points.

Important!In order to avoid mechanical damage on the pallet, which is now left without a protective film layer, a piece of cardboard should be placed under it (you can use the bottom of the package itself, previously separated from the walls for convenience).

After screwing two nuts on each stud, use them to connect the supports to the frame and the pallet itself.

Put the frame on the exposed studs and fix it with nuts on both sides (one has already been screwed on by you in advance, screw the second on top of the frame). tighten nuts metal frame so that its surface touches the bottom of the pallet.
Starting to assemble the shower tray Don't overtighten the nuts as the base frame is quite thin and you could bend it and break it. overall sustainability and structural integrity. Now select the screws of the appropriate size (profile height plus another 5 mm) with which to attach metal frame to the pallet.

At the bottom of the pallet there are already ready-made bulges with which you need to dock the frame. After docking, boldly tighten the screws.

Video: how to assemble a shower tray

At the very beginning of this stage, remove the protective film from the screen. Now be very careful and careful not to accidentally scratch the apron, because this is the face of your cabin.

Attach the apron to the previously assembled structure and find its correct position. Now find the screws that are the right length, and start the screwing process by attaching the brackets to the mortgages.
Now a similar operation must be repeated with the brackets on the pallet itself. Brackets in the kit are plastic white or black, as well as metal. If with the first special difficulties does not arise, then you will have to tinker with the metal ones in order to correctly fit it to the pallet.

Important!At this stage, it is important to make the final adjustment of the fit of the bottom of the apron to the brackets, because it will be very problematic for you to do this further. The main thing you need to pay special attention to is the perpendicularity and proper curvature of your screen. If the lines appear clear and smooth, then everything is done correctly. If obvious curvatures are noticeable, then everything must be set before continuing with the subsequent assembly.

The next moment you need to put on each of the three or four (depending on your model) studs a nut and a washer. String black brackets on top of them, shaped like the Russian letter "G".

One of the sides of such a bracket, short and perforated, should look towards the apron. Now put another washer and nut on each stud and fix the brackets.

Assembly technology

When the lower part of the future bathing unit is assembled, you can rise from the floor to your feet and continue assembling the system. The next phases of installation will be the ceiling, frames from the cabin doors, walls, central panel and hydromassage. So, let's figure it out.

Immediately after the pallet, we recommend doing the ceiling. And first of all, find among your many boxes with accessories the one that contains the lid itself, a light bulb, a rain shower, speakers, a cooler and many other small details, the number and set of which depends on your shower cabin model.

When you find the right cardboard container, print it out and remove the protective film from all parts to make it easier for yourself to further assembly and not be distracted.
From now on, try to act as carefully as possible and without sudden movements in order to keep all new surfaces in a presentable form and not cause mechanical scratches or damage during the installation process.

Now we insert the wire and the lamp itself into a hole suitable for it. Using metal spacers, secure it firmly to the ceiling, after which be sure to check your work.
Shower cabin lamp The speaker (or speakers) will fall into place next.

Did you know?In order to ensure complete noise and vibration isolation of the speaker, a small layer of sealant should be applied along the contour of the fixture. Then he will not rattle and make extraneous sounds, and therefore, will not interfere with enjoying a tropical shower to divinely beautiful music.

The speakers are closed with special protective grilles, which will protect them from water ingress and from mechanical damage. These chrome parts are attached with screws that you can identify by number and length.

Here it is better to work manually, since any oversight - and the screwdriver will quickly scratch mirror surface chrome grille.
Mounting the speaker on the ceiling of the shower The next step in the installation of the roof will be the installation of a cooler (fan). Everything is quite simple here: four screws are threaded into four holes, and in a few minutes your fan will fall into place.

Next, move on to the rain shower, which is also located on the ceiling. We put the corresponding parts in place and fix them. In the center we fix with a nut, which will hold the shower. If you couldn't achieve symmetry the first time, it doesn't matter. Loosen the nut a little and correct position, tighten again.
Installation of a rain shower on the ceiling of the shower cabin That's all. The roof of your shower enclosure is assembled.

After successfully assembling the pallet and roof, it's time for the door frame and walls.

To mount the frame from the cabin doors, you need to find four parts: 2 straight and 2 semicircular, as well as 8 screws from of stainless steel, which will connect the structure.
To correctly position the parts, you should carefully consider the stickers on them, where the upper and lower frames will be indicated. You should also inspect the entire structure and determine the convex grooves for future glass. All slots must face the same direction.

When you deal with correct location details, proceed to twisting the elements together. Here it is also better to work with a manual screwdriver so as not to cause any damage.

Did you know? The oldest bath known to mankind is almost 5 thousand years old. It was found during the excavations of the palace of Knossos on the island of Crete.

This operation can be carried out using the functions of a screwdriver. To do this, the tool is set to the “three” mode, and then the screw is slowly inserted at low speed after the screw.

There may be some difficulties caused by the need to get the mounted screws on the bit into the corresponding hole in the frame (the screw has a tendency to constantly slip and fall).

In this case, you need to use silicone, having processed all the heads of the screws with it. This technique will help to put the slots of the screws on the bit of the screwdriver more firmly and quickly cope with the work.

You may be a little embarrassed by a certain shakiness and fragility of the resulting structure, but you should not overtighten the screws, let alone insert more. When all door parts, including glass, are in place, the frame will acquire the necessary stability and strength.
Now place the stops (small transparent cylinders). With notches, such limiters should look towards the door. These elements not only limit the movement of the door so that it does not crash into the body and is not damaged, but also contribute to its smooth movement.
Rubber stops Pass thin and short screws into the stops and fix them in the appropriate places.

Important!Find the screws for the stoppers you need. They should be visible no more than 3 mm when inserted into the transparent cylinder. If the screws are longer, then you can cause irreparable damage not only to the limiters themselves, but also break the door frame, and this cannot be fixed without replacing parts and, accordingly, additional costs.

Last important point the hinges will be lubricated with grease. All luxury cabins are lubricated on the hinges to ensure maximum sliding and smooth movement of the door.

When assembling the walls, the basic rule also applies when you first need to set and measure everything, and only then screw it on, but do not tighten it with force.

Also, during the assembly of the walls, special seals or sealant should be used to avoid further leaks. If the central panel is disassembled, then we start the assembly from it.
Shower wall assembly

Properly position the decorative chrome metal cover. The pictures in the instructions will help you with this. Next, place the mixer levers in their place. Now we turn to the assembly of the hydromassage.

To assemble the hydromassage, find a nozzle with an outlet. This will be the final element of the chain, which is installed first in the corresponding hole with a nut.
Do not forget to put a washer under the nut so that the structure does not loosen during operation.

Important!Don't overstock the hose around bends and bends as there may not be enough hose for all the elements!

Further, in accordance with the instructions and its image, insert the nozzle after the nozzle, collecting general scheme of six elements. It is not necessary to overtighten the nuts so as not to damage the parts.

Now it's time to connect the hoses to connect the circuit together.

First, connect all the hydromassage nozzles together. Then stretch the hose to a regular watering can, and at the end connect the rain shower system to the water supply.

Put the hose on the desired fitting, and connect the other end to the fitting of the initial nozzle. Then carry out all the connecting work in accordance with your instructions. Using the supplied clamps, fix the hose along its entire length so that it does not dangle or sag.

After removing the protective film from the shower guide block, try it on the appropriate place in the structure to make sure it fits. Such a delivery set includes special clamping brackets, with which you need to fix the control unit on the wall of the shower cabin.
Control block Effortlessly tighten the brackets with screws and process the seams with silicone. Thanks to this action, you will set the panel with the necessary stability and tightness to the wall surface.
Sometimes the hole for the control box is too big and it can stand up a bit crooked. In this case, slightly loosen the brackets and, after adjusting, tighten again.

At this point, the process of assembling and mounting the control box of your new shower enclosure is complete.

To engage in the installation of the walls of the bathing apparatus is separate from the pallet, so that all parts fit snugly together. Fasten the side elements of the box in turn to the central wall, joining them vertically.

Important!Do not hurry. Check that the panels are properly aligned. They should fit perfectly with each other. Otherwise, you will have gaps and leaks.

Before you cover this structure with a roof, you must install the door frame in its place, which you also prepared in advance. In eight places, the frame is fixed with screws and a screwdriver.

Correctly adjust the parts so that the grooves for the screws match, otherwise unwanted gaps will form through which water will subsequently flow out.

After finishing fitting and assembling the wall panels and door frame, cover the structure in advance assembled roof. It is easier to do this before the entire box has been placed on the pallet.

The roof must be fixed with four screws to the walls: two in the central wall and one on the side. If you want to completely strengthen your structure, then you can fix the roof to the door frame, so that the latter does not sag or dangle.
For this, manufacturers do not provide fasteners, and therefore you will have to work with a thin (2 mm) drill, and then screw in thin screws. Be careful not to damage the hollow profile of the door frame and ruin the whole job.

When both sides fit perfectly to the main center panel and the roof has found its place, transfer the assembled structure to the inverted working position pallet and fasten it along the joint line.

Check the resulting design for gaps. If any were found, try to align the walls and remove the gap manually. If this does not help (in Chinese models, the pallet is often curved), use silicone and go around all the seams between the walls and the pallet.
Having reached the symmetry of the roof, walls and pallet, you can proceed to one of the most important stages quality installation a new do-it-yourself shower cabin - sealing the seams.

Gently and carefully go through all the joints that up to this point have remained without silicone sealant. Feel free to smear the silicone with your fingers to improve its adherence to surfaces and improve sealing effectiveness.

To improve the effectiveness of sealing, wipe the seams lubricated with silicone with a cloth previously moistened with a degreaser.

Did you know?The largest bath in the world is located in the Babolovsky Palace of Tsarskoye Selo. It is hollowed out of granite, and its dimensions are 1.96 m in height and 5.33 m in diameter. The wall thickness is 45 cm. This structure weighs 48 tons.

Skip the roof and door frames for now, here you still need to complete the package and go through the stage of assembling and installing doors, to which you are moving on.

While the silicone dries, attention should be paid to assembling and installing the door panels.

After unpacking and removing the protective film from the door panels, align them as they will be installed in the shower cabin so as not to confuse the screwing side of the rollers and cilia. Rollers are installed only on upper part doors, if this rule is neglected, then you will not be able to install the door in its place.
So, the first step in assembling the doors will be the installation of the side windows in the corresponding guides of the vertical profiles.

in advance on glass surface planted plastic seals, which also need to be well lubricated with silicone, and even better oiled in order to improve the sliding of doors during installation and further during operation. The grooves on the profiles are also recommended to be smeared with an oily composition.
Having completed the previous stage, we fix the door leaf on the profile, after which we put on the bottom row of rollers.

Having inserted the door leafs into place in the corresponding grooves for the rollers, you need to adjust the position of the eccentrics, which are located in the rollers themselves. This can be done by turning the eccentrics with the narrow part up, thereby making the interval between the rollers as remote as possible.

Important! In addition, the tightening of the nut fasteners on the rollers deserves special attention. You can’t overtighten them, because tempered glass is easily subjected to mechanical damage and will burst so quickly that you won’t have time to come to your senses and understand what happened. Under the order, such glass is made within a month.

Once the front glass panels have been properly installed, the doors can be installed.

An important point is the final adjustment, straightening and inspection of the correct closure and the action of magnetic inserts that regulate the closure and snug fit of the door panels to each other. If these magnets do not work well, then they must be adjusted by turning the eccentrics on the single-roller door holders or by screwing in the screw in the two-roller holders.
Obliquely drilled holes can be the culprit that the doors will not reach the end. In this case, you need to unscrew the limiters, and then set the correct position from the inside.

Next, armed with a drill and a thin (about 3 mm) drill, correct the manufacturer's mistake and insert the stops in the desired position. Now the problem of door panels flying out of the guide profiles and their loose fit will be solved.

hydrotesting

Before you install electrical equipment and thereby complete the installation of the shower cabin, you need to check the unit for leaks so that nothing leaks anywhere and does not spoil your work and your mood.

Having finished connecting the water communications, arm yourself with a shower head and turn on the water. Gradually bypass the water pressure on all surfaces that can get water during bathing (you can not touch the ceiling).

Alternately close the cabin doors and check the tightness glass partitions. Pay special attention to the junction of the walls and the pallet, as this is the most dangerous place where leaks are most commonly found.

If you find that water is leaking somewhere, dry the surface with a rag and hair dryer, then seal the gap with silicone. Wait until it hardens and repeat hydrotesting.

If there is no leak, then you are entering the finish line, namely, the installation of electrical equipment.

When connecting the speakers, fan and lamp to the mains, follow the labels and inscriptions on the outgoing and incoming cords. That way you never make a mistake. All you need to do is to plug the desired cord into the appropriate socket one by one.
The power supply is best placed on the cab ceiling to minimize the chance of water getting on the electrical wiring.

Now that everything is assembled, do a final test by turning on all the functions of your shower enclosure in turn. Turn on the water, start the rain shower, experience the whirlpool, turn on the music and turn on the fan.

If everything works, then you have succeeded, and you have mastered the task of assembling and installing a shower cabin at home, on which we congratulate you!

The process of assembling a shower cabin cannot be called simple and fast, but thanks to the step-by-step instructions, it is quite possible to do it yourself. In addition, by performing this procedure yourself, you will learn all the nuances and possible places of breakdowns and will be able to repair and replace components yourself if necessary.

The best videos on installing shower cabins with your own hands

Video: how to independently assemble and install a shower cabin

Video: installation of a shower cabin

Video: how to assemble a shower cabin using the example of Erlit 4510TP C4

Chinese-made shower cabins are no different from their Italian counterparts, except for one thing - the presence of a normal, clear instructions in Russian. But in terms of price, Chinese products, as always, stand out favorably among Italian and Spanish-made shower cabins. For example, South Korean and Chinese corner cabins 90/90 cm will cost about 12,500 rubles, while for a shower Italian manufacturer GRUPPO TRESSE can lay out all 250,000 rubles. The difference is impressive! It remains to connect the ingenuity and assemble the shower cabin yourself.

Types of shower cabins

closed shower, consisting of a tray, shower walls, a top cover and the shower itself, and if it is a multifunctional cabin, then additional nozzles are added to it.
open shower, consisting of a pallet, a shower ruler and doors. The walls of the shower cabin are the tiled walls of the bathroom itself.

The pallet is needed to collect and remove water. The shape of the shower trays are angular and rectangular. According to the height of the pallets, they are flat (but they require a special drain of water) and bathtub pallets, in which you can even sit. The most popular pallet material is acrylic, but there are ceramic, cast iron pallets and even stone products.

Shower walls provide tightness and prevent water from entering the floor. Also on the wall are a mixer and hydromassage equipment. In open showers, 80% of the shower walls are made up of sliding doors.

Basically, such cabins are placed in the corner of the bathroom. It is necessary that the corner be tiled from floor to ceiling. On one of the walls there should be pipes for hot and cold water. There must be a sewer outlet in the floor or under the wall.

Tools for installing a corner shower enclosure

level
gas key
screwdriver or drill
drills for metal 3 and 6 mm
bits RN-1
Phillips and slotted screwdrivers
hoses for water supply
waterproofing tape
2-3 cans of mounting foam

Installation steps for a corner shower

After sealing again insert the clamp and hose into place. With reverse side we put a sealing rubber on the hose and also process it with silicone, because the diameter of the hose is 4 cm, and the sewer outlet is 5 cm. The hose, due to its length, is inserted into the sewer. After installing the siphon, you need to pour water into the pan and see if is there a leak. If all is well, then you can do a major mount. The pallet is placed in the place of final installation, rises 5 cm(here you will need the help of an assistant), and 2-3 cylinders of mounting foam are poured under the pallet.

The pallet is put into place and loaded from above with cargo. The cargo should be impressive, for example, bags of cement, boxes of tiles. It is best to put the load not on a pallet, but on a shield of a similar lift, so that the pallet does not warp under heavy weight. Next, you need to wait a day until the full drying foam.

We install the walls of the shower cabin.

First we put back where the control panel is located, where all the electrics are, cold and hot water is located on the inside. It is placed next to the side panel, connected to it with screws and fastened to the pallet with self-tapping screws. Bonding point treated with sealant.

ATTENTION! We do not fix all fasteners until they stop until the final installation. All cabin walls are assembled separately and only then installed in the cabin.

The rectangular shower cabin is surrounded by glass walls on three sides, and there is a door on the fourth side. This is far from an economical option, so it needs to be installed by a professional. But, if you are still confident in your abilities, there are some recommendations for installation.

Rectangular Cabin Mounting Tools

level
sewer metal pipes diameter 5 cm
hydraulic seal
drills for metal 3 and 6 mm
drain funnel
decorative grate drain
concrete mortar
waterproofing mastic
construction screed

Installation steps for a rectangular shower enclosure

In principle, the installation of a rectangular cabin is not much different from the installation of a corner cabin.

Estimated prices for accessories

Cezares MODENA glass shower door and walls, length 120 cm, width 90 cm, height 1950 cm, price 43,900 rubles
Lateral glass wall Timo SP-900, price 9,130 rubles
Door glass "accordion" Timo BT-639−90, price 19 930 rubles
Side shower wall Ravak PIVOT PPS-100, price 13,166 rubles
Glass for a shower cabin, price 1,100−2,700 rubles / meter
Аcuzzi, Ego shower panel with thermostat, price 106,930 rubles
Shower panel AM. P. M. Bliss W53P-1−124M, price 19,242 rubles
Shower enclosures GROHE Euphoria 27296001, price 22 576 rubles
Shower railing Kaiser SXP-90-02 bronze, price 11,300 rubles

Shower cabin installation video

When installing a shower cabin, many use the services of craftsmen. However, often the installation procedure does not follow technology, as the master tries to finish as soon as possible and take money for all completed and outstanding actions. Knowledge of the installation technology will allow you to easily install a shower stall on your own or competently control the installation process by a master.

The main nuances when installing a shower stall

The main thing when installing a shower stall is to choose right place for installation. It should be next to the hood and, if the model has many additional features, connected to the mains with mandatory grounding. When assembling the pallet, you need to use building level, since the pallet must be installed strictly horizontally. When installing the pipeline, be sure to use sealants, otherwise the flow of water will force you to redo all the work. When connecting the cabin to the water supply, at least one filter must be installed. All pipes are led along the baseboards or hidden in a box or wall.

Consider detailed example installation of a shower cabin on the example of Massimo. This is a corner booth made in China with a high tray. Size - 100x100 cm. Bought for 30 thousand rubles. For other models and manufacturers, the assembly may differ.

Instruments

For installation we need:

wrench for 19 and adjustable for 45;
long Phillips screwdriver with PH2 bit;
transparent sanitary silicone;
construction gun for sealant;
spatula for silicone;
spray;
fairies;
drill with a drill 3 mm;
roulette;
bubble level 1 m;
jigsaw;
erasable marker;
thread lock or cold welding;
hose for water supply on 1/2″ nut-nut - 2 pcs. (length is selected locally);
sewer crossing 40x50;
toilet paper.

Pallet assembly

Having made locknuts on the studs, we screw them into the pan. Short - in the center. Screwing it in by hand until it stops, fix it with a nut. When twisting, do not make great efforts, you can break the thread. Only cold welding will help save the situation.

We wind on the second lock nut on each hairpin notches up.

We lay the frame on the studs, attract and fix it on both sides with nuts.

On 4 front studs we fasten plastic brackets for the screen of the shower cabin. The perforated part should hang down.

We fasten the legs with locknuts and set the pallet in place.

We adjust the height of the screen under the lower edge of the side of the pallet. It is leveled by twisting the legs.

The lower edge of the brackets must be set with a gap of 20 mm from the floor, without tightening to the end.

Sewer connection

To install the drain and siphon, remove protective film around drain hole. Upper rubber gasket It is better to replace with silicone sealant. Screw on the siphon. Threads and bottom connections are also treated with sealant for reliability.

Through the adapter you need to connect the siphon to the sewer. This connection is also coated with silicone.

Side wall installation

We remove the protective film from the top of the pallet, but leave the bottom protected for now.

We move the pallet away from one wall and install an opaque wall there. We connect the holes in the pallet with a corner and fasten with 35 mm self-tapping screws (without special efforts).

We install the partition back and remove excess silicone. Further, I will not write about removing excess, remove them immediately after pressing the parts.

We push the pallet with the partition against the wall and try on the central panel to see if additional lining is needed. Apply silicone to the joint of the side wall and central panel. We connect them with 10 mm self-tapping screws.

side wall

We try on a fixed transparent partition. Oblique cut metal profile should be at the bottom.

If everything fits, we silicone the profile and install the partition. Set the top edge flush with the wall. From the top outside drill a hole with a diameter of 3 mm in the profile and fasten the partition with the wall with screws. This is how it looks in practice.

Install the top and bottom profile. Rounded parts are directed towards each other, the upper profile is wider than the lower one. We apply silicone under the bottom.

Ceiling Assembly

We collect the ceiling of the shower stall. To remove the film, unscrew the ventilation grilles and the speaker.

We install the ceiling in place, while without silicone. It is screwed from below with 4 stainless steel screws 16 mm.

We connect and check water and electricity. Do not soak the top edge of the drip tray.

We put the booth in place and check the stability and level.

On the inside, we process the lower perimeter and the central rack with silicone.

Door installation

From the side of the handles, we put magnetic moldings on the doors. On the other sides - L-shaped moldings with a shelf out.

We hang the doors on the upper rollers. To start the lower ones, press the buttons.

We check the smoothness of the doors and the tightness of the junction. Doors must not open on their own from any position. The abutment is adjusted using screws on the upper rollers.

Screen installation

We remove the screen, and make marks opposite the brackets.

We install the screen by installing wedges from below.

When the silicone dries, we spill the joints of the cabin, check the performance of the watering cans and the switch.

Installing a shower stall is a fairly simple procedure, subject to the instructions and knowledge of the basics. plumbing work. If you have never dealt with connecting plumbing, it is better to entrust the installation work to specialists.

Categories

Popular