A simple homemade humidifier using expanded clay or ultrasound. Do-it-yourself ultrasonic humidifier How to make a powerful humidifier with your own hands

According to medical advice, humidity in any residential area should be at the level of 50% - only in this case, everyone staying there will feel comfortable. Low moisture content in the air impairs general well-being, increases the likelihood of various diseases leads to skin problems.

Humidifiers are used to set this indicator to a normal level and maintain it there.

What are humidifiers

All existing appliances, which serve to increase the moisture content in the composition of the air are divided into three varieties:

  • water;
  • steam;
  • ultrasonic.

The simplest type of such equipment is water humidifiers. Their work is based on the passage of air through the filter element, which is pre-moistened. The filter is most often cassettes made of several layers of paper. The increase in air content occurs during normal room temperature, this is achieved thanks to natural evaporation water. Although the efficiency of these types of devices is low, they are characterized by an affordable cost.

Steam humidifiers perform their functions by heating and evaporating water - something like a boiling kettle without a lid. Devices of this category are able to provide good hydration, but they are not safe to use - you can easily get burned. Therefore, the use of such humidifiers in a home with small children is not recommended.

The most modern and effective type of humidifier is ultrasonic. Inside the device there is a plate that vibrates, from this the water breaks into very small drops, the fan spreads them throughout the room. The effectiveness of such moisturizing is at a decent level.

A simple homemade humidifier

The modern market offers consumers a variety of humidifiers. different type, performance and prices. In addition, you can always make a humidifier with your own hands - develop simple models pretty simple.

There are many schemes for home-made devices to increase the moisture content in the air. Consider the process of creating a device of the simplest design.

Used materials and tools

First of all for self-manufacturing such a device will need to find a plastic container. Its dimensions do not play a big role, the main thing is that the height is at least 20-30 cm.

In addition to such a container, you will also need a fan from the computer. The last component of the future humidifier is the power supply, which will ensure the operation of the fan. For computer coolers to work, the voltage must be 12 V - a block of exactly this voltage will be needed.

After preparing all these materials, you must also prepare the tools. Among them:

  • drill;
  • soldering iron;
  • stationery knife.

Sequence of work

After preparing everything you need, you can begin the process of assembling the device. How to make a do-it-yourself humidifier of a simple design? The sequence of actions is as follows:

  1. In the lid plastic container holes are drilled - through them a fan will be attached to the upper edge of the box;
  2. Next, on the cover, a place is marked where the cooler blades will be located. Using a clerical knife, a marked hole is cut;
  3. The next step is to install the fan in the place prepared for it using the selected mounts.

On this handmade production humidifier is almost complete: it remains only to connect the installed cooler with the power supply using a soldering iron, pour water into the container, close the lid. After that, the device will be ready for use.

Similar simple design is able to provide humidification of the air in the room by about 30 percent, which is a worthy indicator.

Humidifier using expanded clay

More high efficiency is different homemade device, which uses expanded clay - a material that absorbs moisture well and releases it. Since a device of this design provides a good increase in humidity, it can be used not only in household purposes, but also, for example, for growing mushrooms, which require very high humidity.

To make a humidifier according to this scheme, you will need:

  • plastic wastebaskets - 4 pieces, two large and two smaller;
  • a bucket of 10-12 liters;
  • computer fan;
  • aquarium pump.

The process itself is carried out in the following sequence:

  1. Two small baskets are connected to each other. This can be done with glue, plastic fasteners or household hair dryer.
  2. Baskets are connected in the same way. large volumes by setting inside their connected small ones. In this case, a humidifier case will be obtained, similar in design to a thermos.
  3. Next, a hole is cut out in a large basket, expanded clay is poured into it.
  4. It is necessary to select this material so that the granules do not fall out through the slots in the baskets. Previously expanded clay is thoroughly washed with water.
  5. An aquarium pump is installed at the bottom of the water bucket, its tubes are brought out to the very edge of the bucket.
  6. A plastic ring, in which holes are made, is installed on top of the humidifier - from the holes, moisture will flow back into the bucket.
  7. A fan is installed on top of the ring, which will supply air to the inside of the humidifier, which, when moistened, will go outside through the holes in the baskets.

Pouring water into the bucket and placing the lower part of the made container with expanded clay into it, homemade humidifier will be ready for use - it remains only to supply power to the cooler.

Homemade Ultrasonic Humidifier

Now everyone knows how to make a humidifier of the simplest design. Ultrasonic types of such devices are even more efficient, they can be used for domestic purposes, and for growing mushrooms, or for many other purposes. How to make an ultrasonic humidifier with your own hands?

The scheme of work is as follows: on the float, the piezoelectric emitter will descend into the water, producing "cold steam". A fan is used to supply air inside the case, which will also push steam out of there.

Materials:

  • a small plastic bucket with a lid is suitable for the body of the device;
  • computer fan;
  • two tubes 10-15 cm each, the diameter of which is the same as that of the cooler blades;
  • Styrofoam;
  • disposable cup;
  • an ultrasonic wave emitter, which can be purchased at many radio parts stores.

After preparing the materials, you can begin to develop the device:

  1. Holes are made for pipes in the bucket lid. On the upper part one of them is installed cooler.
  2. A hole is made in the foam for the cup. It is installed in the hole - the float for the emitter is ready.
  3. Two holes are made in the bottom of the cup for water to enter. An emitter is placed inside such a float, water is poured into a bucket, the float is lowered there.
  4. The bucket is covered with a lid, the tubes are inserted into the prepared holes.

After that, you can turn on the emitter. If everything was done correctly, “cold steam” will immediately come out of the free tube. Thus, the emitter is useful household appliance, which you can do with your own hands.

The level of humidity is one of the most important indicators of the microclimate. Dry indoor air can cause poor health and even health problems. How to increase the humidity in the apartment, if you don’t want to spend money on expensive equipment? There are ways - you can either make a humidifier with your own hands, or use improvised means.

Are you tired quickly? Allergy haunted? Are you sick often? Perhaps dry air is to blame. Low humidity- especially in winter period- becomes a problem in many homes and leads to negative consequences.

To humidify the room, it is absolutely not necessary to buy expensive devices. However, do not think that a basin of water in the middle of the room will solve the problem of low humidity once and for all: alternative ways are not as effective as, so they can only be considered a temporary measure.

Why you need to humidify the air in the apartment

Keeping an eye on the humidity level is a must. But what is harmful dry air in the apartment?
Why do you need a humidifier in the apartment - at least homemade?

  • Dry air causes a sore throat, cough, dries the mucous membranes of the nose and eyes; eye problems are especially relevant for those who use lenses.
  • Air with low humidity and high dust content is especially dangerous for children, asthmatics and allergy sufferers. In addition, the risk of allergies increases in healthy people.
  • With a lack of moisture, fatigue often increases, drowsiness, sometimes even occurs.
  • Hair and nails become more brittle and faded, and the skin dries out.
  • In dry, warm air, bacteria and viruses tend to multiply faster, and hence the risk of disease increases.
  • Dry air negatively affects not only humans. From lack of moisture, they stop growing or dry out. houseplants, deteriorate faster wooden furniture, windows, doors, musical instruments etc.

The list is impressive. However, there are too many consequences, so it is better to observe the golden mean.

To make the apartment comfortable, it is necessary to maintain a humidity level of 40-60%. About, for example, in a nursery or office, you can also read on our blog.

indoors in a number of ways. If you don't have on hand special devices, you can use folk ways. Of course, it is impossible to determine the exact figure, but if the room needs to be humidified, you will definitely know about it.

  1. Pour water into a bottle.
  2. Put it in the refrigerator for several hours.
  3. Remove the container and leave it in the room for five minutes. The walls of the bottle will quickly become covered with condensate.
  4. If after five minutes the drops on the bottle are almost dry, then the air in the room is very dry. When excessive high humidity drops will turn into a small puddle. If the drops slowly slide along it, then the humidity is normal.

A spruce cone will also help measure the level of humidity. A fully opened cone indicates low humidity; if the scales of the cone are only slightly open or tightly pressed against each other, then there is no problem with moisture.

To find out the exact moisture content of the air, you will need hygrometer. The main thing is to put it away from batteries and other heating appliances: so you get the most reliable information.

If you want to know not only the level of air humidity, but also other indicators of the microclimate (for example, temperature and content in the air carbon dioxide), then you should pay attention to the smart microclimate system. It allows not only to monitor the characteristics of the air in the house, but also to automatically control the climate control equipment.

The most common advice for humidifying the air in an apartment is to put wet towels on the radiator. But the towels will often have to be moistened, which is not very convenient. more elegant and creative solution There will be special humidifiers for the heating battery.

These humidifiers are a container into which water is poured. The vessel is hung on the battery, and the water in it gradually evaporates, filling the room with moisture. Most humidifiers different forms and sizes are made of ceramics, plastic, steel and other materials.

Judging by the reviews, the most popular option is a ceramic humidifier. True, its evaporation area is small, so it is better to hang two or three devices on radiators. Ceramic humidifiers are inexpensive, their fasteners are usually reliable, and the variety of shapes, colors and decorative paintings will make it easy to choose a copy that matches your interior.

Rigid tap water can spoil appearance container walls. Therefore, before pouring water, it is worth filtering it.

1. You can make a battery humidifier with your own hands:

  • The main thing is to choose a product from a material that does not melt at high temperatures. Suitable ceramic vases or bottles, dishes made of heat-resistant plastic, etc. Can do home humidifier and from a plastic bottle, but then you will have to forget about the aesthetic side.
  • It is necessary to make a hole in the container and stretch a reliable fastener into it. Strong wire is fine.
  • The final look of a homemade humidifier is entirely up to you! You can paint it with paints, make an applique, cover it with a beautiful fabric.
  • To fill the room not only with moisture, but also with a pleasant smell, you can add a couple of drops to the water essential oil with your favorite scent.

2. The easiest way to humidify the air at home is take a spray bottle and spray water around the room or put a water tank in front of a fan. You can also put a pot or an ajar kettle with boiling water in the room. But you should not abuse this method: hot steam has a bad effect on the durability of wallpaper and furniture.

3. The next method is similar to the previous one, only it turns into a humidifier kitchen stove. Place a pot or other container of water on the stove and boil over low heat. Add cinnamon sticks, lavender, orange or apple peels to keep your home fresh. nice smell. Remember to make sure the water doesn't boil away.

4. The bathroom is known to be the source of the highest humidity in the house. Leave the bathroom door open after taking a shower is an easy way to add a little extra moisture to the air.

5. Not sure how to deal with low humidity? Clean up your entire wardrobe! You will effortlessly fill the air with moisture if you dry your clothes on the radiator or next to it. So you will kill two birds with one stone: things will dry faster, and the humidity will increase.

Basically, a hydrogel is decorative ground, which is used in floriculture, but it will also work for humidifying the air. Instead of placing basins and pots around the house, you can put them in a beautiful glassware hydrogel in the form of colored balls. Under the influence of moisture, they increase in size several times and gradually release moisture to the air in the room.

Do not forget to add water to the container with balls from time to time so that the evaporation process does not stop.

The microclimate in your home can improve a little if you arrange a small home garden. , a moot point, but some specimens can help in moisturizing: plants need little water from the ground, 99% of moisture evaporates through leaves, flowers and stems.

You should choose moisture-loving plants that need regular watering or spraying, such as ficuses, ferns (for example, nephrolepis is a type of fern), hibiscus, dracaena, etc. And do not turn the mini-garden into a jungle - a few plants that complement the interior will be enough.

Any container with water can become a humidifier, since water tends to gradually evaporate. Aquarium - the same container with water. You need to choose outdoor aquarium without a lid - closed models are not suitable for our task. The only drawback is that the aquarium and the fish in it must be constantly looked after.

Russian "kulibins" are brainy people and making a humidifier with their own hands is a trifle for them. Moreover, the principle of operation of the device is simple. Consider the most popular options for making a humidifier for the home and try to give detailed instructions for each of the proposed methods.

These devices evaporate the water poured inside, and then supply the formed steam together with the air into the room. You can even "draw" the following picture: a basin with water and a towel dipped into it. This simple humidifier air can also be used in everyday life, however, it is ineffective, since it humidifies the air only in its immediate vicinity.

Modern units work a little differently. Cold steam appliances atomize moisture with a fan and fine mesh, steam use the principle of the iron ( heating element, immersed in water, evaporates it and “pushes” the resulting steam out), ultrasonic ones convert water into a water cloud using a piezoelectric element that generates high-frequency vibrations.

Using this simple knowledge, you can make such a design yourself.

Bottle option

To make a "bottle" humidifier, you will need:

  • battery central heating(not wall-mounted)
  • one and a half or two liters plastic bottle from under the water (of course, empty)
  • wide tape
  • a strong long piece of cloth or rope
  • gauze about a meter long

This home-made device does not consume electricity at all, is easy to assemble, does not leave salt deposits on objects in the room, as is usually the case with ultrasonic devices that are now popular. But the most important thing is that it does not require any financial investments, well, unless you have to buy scotch tape, gauze and drink a half-ton of mineral water.

The cheapest humidifier is made from regular bottle and a piece of gauze

Manufacturing instructions

  1. Using scissors, we cut a hole in a plastic bottle 10-12 cm long and 5-7 cm wide. The slot should be located on the side.
  2. We cut off a piece of fabric and from it two long strips of the same size. We hang the bottle for these seeds to the pipe extending from the "accordion" so that the cut hole is at the top
  3. For greater strength and reliability of the structure, we fix the junctions of the bottle and ribbons with adhesive tape
  4. We take gauze and fold it several times. You should get a rectangle 1 meter long and about 10 cm wide.
  5. We lower one end of the gauze into the opening of the bottle, and wrap the other around the pipe. You can even enhance the moisturizing effect by taking two pieces of gauze and constructing two wicks.
  6. Using the second bottle, pour water into the hole.

How to make a humidifier from an old bucket and expanded clay

Expanded clay can both absorb moisture and release it.

Expanded clay device

You will need:

  • four trash cans (two smaller, two larger)
  • twelve liters bucket
  • aquarium pump
  • computer cooler diameter 140 mm
  • household hair dryer
  • plastic ties

Crafting Instructions

  1. We connect two small baskets together. They are connected along the rims with the help of a household hair dryer, but if suddenly it is not there, then you can get by with plastic fasteners. You should get a body of the future device, hollow inside.
  2. Two large baskets are also connected, it is only necessary to first place inside them the case you already have from small baskets. As a result, you have a two-layer unit on your hands, resembling a thermos in its shape and purpose, consisting of four plastic buckets.
  3. The bottom of the upper large basket must be cut with a knife or simply cut a hole in it for filling expanded clay. Expanded clay must be taken in such a size that it cannot "leak" through the holes of the baskets.
  4. An aquarium pump is placed at the bottom of a twelve-liter bucket, and the tubes from it are led to the very top of the structure. A plastic ring with holes is located "on the top" of the future humidifier - from these holes, moisture will flow down the expanded clay back into the bucket.
  5. At the top, you need to install a computer cooler that will force air into the expanded clay walls saturated with moisture, and then “drive” it out through the holes in the baskets.

The computer cooler is mounted on top of the structure. It will draw air to the moistened expanded clay

The principle of operation of the wastebasket construction is based on the "work" of expanded clay, so it is worth paying more attention to this particular "ingredient". Select the granules carefully, and before pouring them into the device, be sure to rinse all the expanded clay warm water.

Humidifier bottle and cooler

A cold steam humidifier costs 1,500-3,000 thousand rubles in a store. But its price can drop a hundred times right before your eyes. To observe this incredible spectacle, you will need one bottle of water (preferably a ten-liter one), one computer cooler and scotch tape.

Manufacturing technology

  1. Cut off the top of the bottle with a neck so that a cooler can be installed in the hole formed.
  2. Attach the fan to the bottle with tape. You can take some thick cardboard, make a slit in it a little smaller than the cooler body and attach it to the bottle with the same adhesive tape - it will be more reliable.
  3. Plug in the fan.

These simple options products for moisturizing are sure to come in handy. Even if not in a city apartment, but in the country. Air everywhere and always should be comfortable.

In winter, due to centralized heating in apartments, the air becomes very dry. As a result, the mucous membrane of the nose and eyes loses its elasticity and becomes dry. The eyes are red and sore. A person feels sluggish and dull - these are just small consequences of a microclimate in the house that is not properly adjusted. To humidify the room it is not at all necessary to spend money on the purchase of special devices, you can make your own humidifier.

A simple and effective battery operated humidifier

To do this, you need any container that can withstand high temperature from the battery. For this purpose, a small kitchen utensil or vase is suitable. You can use a plastic vessel, a tin beer can. If you want the container not to spoil the interior, then it is better to opt for a vase.

The next step is to make holes in the dishes, through which it will be easy to fix the jar. If the walls of the dishes are thick and strong, then you will have to drill. If soft like a beer can, then you can easily make holes using any improvised means. The wire will go through the holes. With its help fasteners in the form of hooks are mounted, which will be fixed on the battery.

For beauty, you can decorate the front of such a humidifier. It can be a sticker, or you can cover the item with beautiful velor or leather. After such a home-made humidifier is mounted to the radiator, water is poured.

Important! It is necessary to constantly monitor the presence of water in the tank. From the empty capacity on the battery there is no sense.

You can also use a bandage. Immerse one part of it in water, and put the other on the radiator. In this way, water will evaporate easily and quickly, while saturating the air in the apartment. This DIY home humidifier can be made in 1 hour.

Air cooler humidifier

Need to take plastic bottle 2 liters, cut off the upper part with the expectation that a cooler will be mounted in it. In order for the device to be fixed, it is necessary to build a platform from cardboard or a piece thin plywood. In it, a hole is cut out for mounting the lower part of the device. The cooler is fixed to the water tank with adhesive tape.

Important! The humidifier must be installed on a flat, stable surface and only then connected to the mains.

Such a simple device does not require large financial investments, however, the noise level may increase during the operation of the cooler. Therefore, when buying it, you should pay attention to this important characteristic.

Expanded clay - as a humidifier

Characterizing expanded clay, two features can be distinguished: it absorbs and releases moisture. Therefore, to normalize the microclimate at home, it can be safely used. The following elements will help to make a humidifier:

  • waste baskets - 4 pcs;
  • pump for aquariums;
  • cooler with a diameter of 14 cm;
  • plastic bowl or bucket for water 12 l;
  • screeds.

Important! Waste bins needed different sizes. Two larger ones and two smaller ones.

By using plastic ties you need to connect two small wastebaskets. Thus, the body of a homemade humidifier is obtained. The design must be hollow inside. Two large wastebaskets are connected in the same way. But inside there is already a core - this finished frame from small baskets.

The bottom of the large upper basket is cut off. This is done in order to fill up large expanded clay gravel. After all, if it is small in size, it will fall out through the cracks of the trash cans. A pump for aquariums is placed at the bottom of a bucket or bowl, the tubes are brought up. A plastic ring with holes made will be installed at the very top of the humidifier. Thanks to them, the water will flow down into a bowl or bucket, but at the same time wash the gravel.

At the top of the homemade humidifier, a cooler is mounted, which, when turned on, can pump air into the expanded clay gravel. Thus, the moisture will be expelled and drain into the bowl.

Important! Before filling expanded clay in the basket, it is necessary to wash it with warm water. A do-it-yourself home-made humidifier is made quickly and easily, and most importantly (who does not know) expanded clay is made from clay, therefore it is considered an environmentally friendly material.

handmade humidifier

This humidifier not only benefits and moisturizes the room, it is also beautiful. Decorative humidifier- This is the result of fantasy, which can include a variety of decorative elements.

A straw basket or an original cookie tin can serve as a decor for a bowl of water. A bowl for water does not have to be beautiful. It is important that it be smaller than a decorative basket. Stones must be selected rounded in small sizes so that they do not stand out against the background. decorative composition. Stones with a flat side will also work. Do-it-yourself air humidification can be supplemented with glass figurines.

A bowl with lined stones is inserted into a decorative frame. To fix the stones, as they look better, you need to apply glue. However, it is better that the stones mask the walls inner surface bowls. If voids have formed, you can decorate them with sand.

After the design of the water tank is over, it is necessary to allow time for the glue to dry. After that, water is carefully poured into the bowl. This beautiful humidifier can be installed in the most prominent place in the apartment. It will suitably decorate the interior of any home.

Do-it-yourself green oasis

You can make a homemade humidifier using a flower arrangement. To do this, you need to choose a tub. It can be very different in style. Put expanded clay on the bottom. Cover with universal soil mixture. The next step is to plant the plants. If the tub will stand under the wall, then tall plants planted against the wall. The middle tier is in the center, and the low plants are in the foreground.

Using a spray bottle, periodically spray green spaces, this must be done in addition to daily watering. However, it is worth making sure that the plants are not flooded. Excessive moisture will rot the roots.

Important! Flowers should be selected unpretentious, they do not require special attention to themselves. It can be fan or feathery palms, sansevieria, chlorophytum, cyperus, geranium.

You can create a whole collection of one group of plants. It's fun and can turn into a hobby. Beyond moisturizing flower composition will enrich the room with oxygen. However, if there are small children in the family, then it is worth familiarizing yourself with the characteristics of the plant before planting, its juice may be poisonous. Also, plants should not have modified leaves - spines. They can hurt the child.

Simple humidifiers will help create a good microclimate in the house. However, whichever option is chosen, it is necessary to ventilate the room often, both in winter and in damp autumn. This is the only way to achieve a healthy atmosphere in the house. To control the level of humidity, it is enough to buy a hygrometer at the pet store. With normal humidity, the device should show 40-70% humidity. The humidifier must be installed in rooms where the most time is spent. Also, to improve sleep, it can be installed in the bedroom. The main thing is that when the humidifier is running, the noise does not interfere with sleep.

Affects the human body a large number of factors. One of them - the relative humidity of the air - affects the constant body temperature and mood. In summer periods, the body suffers from a lack of moisture: the air is dried, intense evaporation negatively affects a person, often he becomes ill, drowsy.

The problem was solved by air humidifiers - devices based on the release of moisture into the atmosphere in order to increase relative humidity air in your home. How to do it yourself? Let's find out!

Before proceeding directly to work, it is worth understanding the device of the humidifier. The functionality of this device is to evaporate the water that you pour into the humidifier. To date, 3 types of air humidifiers have been invented.

actually create this device at home is not difficult at all. With a little knowledge in reserve, everyone can afford a humidifier, spending a minimum of effort, time and money!

Bottle option

This type of humidifier is easy to assemble, it does not require knowledge of the device, the only condition is the presence of a central heating battery that is not walled up. What do we need to create this humidifier? Several elements:

  • central heating battery;
  • one and a half liter or two liter bottle;
  • scotch;
  • long gauze, about a meter;
  • thick, tear-resistant fabric or rope.

This homemade humidifier does not require electricity, is easy to make and costs minimal money!

Instruction. We use scissors - we cut a rectangle in the bottle about 6 cm wide and about 11 cm long. We take a piece of fabric and cut two identical strips from it.

We hang the bottle with strips so that the hole is on top and the bottle cap is turned towards the battery. In order to avoid mistakes, we fix the structure with adhesive tape. Next, we need gauze - we fold it several times, making a rectangle out of it with a length of about a meter and a width of 10 cm.

We place one end of the gauze in the opening of the bottle, the second we wrap the battery pipe. Pour water - our humidifier is ready!

It will be less efficient than others to humidify the air, since it does not contain elements that heat water.

But you can use your imagination when creating a humidifier - all the decor details you want! What do we need? A few useful details:

Instruction. First, let's prepare a decorative container. It can serve as a basket for bread, and a wicker basket for a picnic.

It is best to work with materials that are not afraid of water. Cover the container with all necessary details. I advise you to use stones - they go well with water.

Next, place the water container without liquid in a decorative container. It is advisable to glue them to each other. After we line the bottom of the water tank - use sand, stones, figurines, just use your imagination! Do not forget: stones and other elements other than sand should be fixed with glue.

After the whole structure is ready and the glue has dried, you can safely fill in water and enjoy. fresh air in the room!

I note that the drying time of the glue depends on the glue itself. We advise you to use superglue - it is not afraid of water and seizes in a couple of minutes.

Expanded clay humidifier option

You won't find a humidifier like this very often. Not every day a couple of kilograms of expanded clay may appear at hand. In fact, this humidifier is great for the home. It is easy to make at home, but you will need parts that are not always at hand. So what do we need to make? The following elements:

Instruction. To begin with, it is worth connecting two wastebaskets that have small size. This can be done using household or plastic fasteners. This building is the future housing for the humidifier. It must be durable.

Next, you should connect two large wastebaskets in a similar way, but at the same time the two connected wastebins should be inside. To fill expanded clay in the bottom of the upper large bucket, we make a hole.

Expanded clay should be taken according to the size of the "holes" of the trash can - it is important that it does not spill out of the holes. We put the pump from the aquarium on the bottom of a 12-liter bucket, we draw the tubes from it to the very top.

We install a structure of 4 wastebaskets on the pump, fill in expanded clay. The pipes will return the water to the top. The final detail is a computer cooler mounted above a hole in the bottom of the top trash can. It will distribute steam throughout the room.

Despite the manufacturing costs, this device perfectly humidifies your home in a fairly short time. You just have to remember to add water!

Humidifier option from a bottle and a cooler

A cold steam humidifier costs a lot of money. You can create its analogue using a computer cooler and a ten-liter bottle of water. The price of such an analogue is about 3 thousand rubles, which is many times less than the cost of a real humidifier. Note that making this humidifier is easy even at home. What will we need? A few details:

Instruction. Using scissors, cut off the top of the bottle so that the cooler can fit into the hole. Next, we fix the computer cooler with adhesive tape. We just have to fill the bottle with water and plug the cooler into the network - our humidifier is ready!

Do not expect great moisture from this device. This is just an analogue of an expensive device, which, alas, it definitely cannot replace.

Also, be careful when plugging in the cooler - we advise you to position the humidifier so that it is not near the sockets. It never hurts to follow the safety rules!

These options for humidifiers will help without extra costs make the air in your home fresh and pleasant!

Fitting © 2022 Design and interior of apartments