Facade panels FineBer series The stone is large. Facade panels Preparing the wall for panel installation

Finebeer facade panels "Large Stone" are manufactured Russian company Terna Polymer. According to Stroymet experts, this optimal choice for exterior finish country house. The material is suitable for cladding the entire facade or separate parts buildings (basement, one of the floors, gables, etc.). Polypropylene is used as a raw material for the production of panels. His distinctive features- lightness, special strength, resistance to external factors(atmospheric precipitation, mechanical influences, temperature differences, sunbeams). The embossed surface with a natural pattern makes the cladding almost indistinguishable from natural stone, providing a special decorative effect. basement siding under the stone can be used for finishing buildings built from various materials(concrete, wood, brick, foam blocks, etc.). This does not require strengthening the foundation or wall structures. Installation work can be done in any weather. An additional advantage is the absence of visible gaps at the joints between the panels.

Technical information for Fineber façade panels

The color scheme of facade panels Finebeer series Stone large

Facade panels can be various forms, colors, textures, sizes, but they all perform the main functions: protecting walls from damage and external influences, decoration facade of the building.

Decorative panels are attached to the crate. They are a ventilated facade design. The material of each manufacturer has distinctive features in terms of quality, texture, collection of colors, fastening of elements.

A popular manufacturer of facade hinged structures is a FineBer company.

Finebeer panels for exterior home decoration are products Russian manufacturer"Terna Polymer". The factory has been specializing in the production of similar materials: has high-tech equipment, specialists have undergone additional training before working on specialized machines.

Sheets for cladding are produced by casting, during which the material is pressed under high temperature. Then applied to the surface paintwork. Thanks to this technology, the strength of products is ensured.

Since the manufacturer is domestic, he has the opportunity to reduce the cost of products due to the absence of customs costs. The cost of FineBeer coverage is lower than foreign, which does not affect the quality of products.

In addition to privates panel elements Finebeer has accessories for every type. Additional elements contribute to the formation of completeness of the cladding and decorativeness.

Finebeer panels are quite light, their weight does not exceed 2-3 kilograms, which does not require additional strengthening of the foundation part of the structure.

Advantages and disadvantages of panels

FineBeer strives to constantly improve the quality of its products. This is due to great competition and the desire to implement new technologies in production.

Like any facade material, Finebeer has certain advantages:

• adaptation of the material to domestic climatic conditions, which is typical for a large range of temperature differences;
• long operating period;
• due to the strong locking elements and the simplicity of the assembly of the structure, sufficient quick installation constructions;
• decorative features. The manufacturer prefers textured design for facing brick or stone;
• due to the lightness of the material, no load is created on the supporting structure;
• moisture resistance of the coating ensured by the presence of strong locks;
• due to the polymer coating, there is no possibility of mold and fungus formation on the surface;
• the cost of FineBeer is lower than analogues;
• sheathing is not required special care: capable of self-cleaning under the influence of rain flows;
• material is fireproof, which is confirmed by test reports.

In addition, the coating with FineBeer facade panels is quite durable and wear-resistant.

To disadvantages facing panels FineBeer can be attributed to a significant expansion of the material with temperature fluctuations, which causes the fastening of the panels with the provision of a temperature gap.

Despite the manufacturer's declared ability to withstand ultraviolet radiation, the panels can fade over time, especially if the facade is on the sunny side.

The ability of the panel to break upon impact ensures careful handling and careful installation of products.

This factor is not directly related to quality defects. facade material, but it should be taken into account when delivering the material and working with it.

Specifications

Facade elements produced by Finebeer have the following technical parameters:

• length of one panel - from 1.080 to 1.137 m (each collection has its own indicators);
• width - from 447 to 470 mm;
• coverage area (depending on size) - from 0.4 m² to 0.46 m²;
• weight of one main element (panel) - from 2.04 kg to 2.78 kg.

Finebeer products are certified and have the appropriate certificates of conformity. In addition, test reports confirm that studies have been carried out in relation to the influence of various external factors on the material.

Types of FineBeer panels

The range of Finebeer facade elements is gradually increasing in relation to market needs. A variety of collections allows you to choose a cover even for a demanding customer.

FineBeer has the following types facade panels:

• collection "Brick". It is an artificial analogue of brickwork in terms of visual design. Imitation of brickwork implies the presence of five shades of natural brick with an identical brickwork texture: beige, white coated, red, red with firing, burnt. The working elements of the collection have dimensions of 1.137x0.47 m;
• collection "Facing brick". Characterized by a glossy front side characteristic of facing bricks. The surface coating is smooth, the collection includes elements of three shades: yellow, ceramic red, burnt. The main elements of the coating have dimensions of 1.130x0.463 m;
• collection " Brick Britt» . A feature of this type is the color of the elements in the form of brickwork with a contrasting frame for each brick. So, for example, burgundy brick has a white edging. The collection is distinguished by darkened colors: black-brown, burgundy, maroon and dark pink. The size of the panels of this collection corresponds to 1.130x0.463 m;
• collection "Stone". Facing has an external resemblance to masonry. The texture is presented in full accordance with the natural material. This collection includes elements of beige, coated white, brown, terracotta and grey-green. Panel dimensions 1.137x0.470 m;
• collection " wild stone» . Imitation stone of natural origin. The color range is presented in the following shades: sand, coated white, terracotta, pearl, gray-green. The elements have dimensions of 1.117x0.463 m;
• collection "Large stone". The pattern of the panels imitates a larger natural stone, the collection itself is presented in colors the same as in the Wild Stone series, with the exception of pearl. The size of the panels is 1.080x452 m;
• collection "Natural stone". It has a texture similar to natural stone, is distinguished by a wide variety of colors: sand, quartz, red-brown, pearl, brown, gray-brown. Panel size 1.085x0.447 m;
• collection "Rock". This texture imitates natural rocky stone in relief and pattern. The collection is presented in various color options: terracotta, sand, beige, tan, coated white. The dimensions of the elements are 1.094x0.459 m;
• collection "Slate". Imitation of flat slate exactly repeats natural slate stone. Elements are characterized natural shades: terracotta, beige, sand, white coated. The dimensions of the panels are 1.137x0.47 m.
• Russian fortress collection. Ceramic variety material.

Facade elements accurately imitate natural materials, repeating not only the texture pattern, but also bulges and irregularities natural material. All collections are completed with ten plates in a protected packaging container.

Preparing the wall for paneling

Installation of panels includes three types of work: preparation of walls for cladding, installation of lathing, installation of facade panels and additional elements.

Wall preparation is no less important condition ensuring reliable and high-quality facade cladding.

To protect the walls from corrosion and moisture, it is necessary to seal the seams, cracks, and also clean them from dust and debris. To prevent the formation of mold, fungus on the walls, it is advisable to treat them with a primer antiseptic.

It is important to check the horizontal and vertical walls with the help of a level, since the facing coating requires strict indicators. If there are small deviations (up to several centimeters), then they can be corrected with the help of a crate.

Installation of FineBeer facade panels

Facade elements are fastened to the crate.

You can create a frame using wooden beams or metal profile . wooden elements before installation, dry well and treat with moisture-resistant and antiseptic agents.

The lathing step is recommended to be performed along the length of the panel (with vertical lathing) or height (with horizontal rails). The manufacturer recommends installing additional guides that run along the center of the panel to ensure maximum rigidity of the coating.

The profile should be fixed around all openings. At the corners of internal and external it is necessary to install additional rails in accordance with the width of the element.

NOTE!

During the installation of the frame, the surface plane should be checked by level.

After mounting the frame, the facade elements should be fixed in the following sequence:

• installation of a horizontal starting bar. The distance from the corner should be 30 cm. A 3 cm strip interruption will ensure expansion with temperature fluctuations. The bar line is mounted around the entire perimeter;
• installation outside corners . The corner should be inserted into the starting line and attached in the upper holes, and then fixed in the remaining holes, observing the principle of thermal expansion (with a gap). If you need to increase corner element, then it should be overlapped by 30 mm;
• installation of work panels. The panels should be inserted into the starting strip and between each other using castle elements. The last panel, if necessary, is cut strictly perpendicular;
• installation internal corners . Additional elements to the collection in the form of internal corners are universal. They should be fastened to the crate and docked with the working panels in the grooves;
• window decoration and doorways should be done with a J-profile. The same profile can be used for finishing coatings;
• installation of accessories. For fastening additional elements, you can make appropriate holes, similar to those in the factory elements.

The installation process is not laborious, the design is assembled quickly. The FineBeer manufacturer recommends mounting the panels at a temperature of at least 10°C.

By cladding the facade with FineBeer panels, it is possible to ensure the protection of the walls, the decorative effect and the aesthetic appeal of the building.

Useful video

Video installation instructions facade cladding fineber:

In contact with

The basement of the building and the entire facade must be reliably protected from the destructive effects of water, wind, sudden temperature changes and all kinds of mechanical damage. For the exterior cladding of the basement and walls of the house, the Moscow company Terna Polymer, founded in 2001, developed FineBer siding.

polymer coating contains special stabilizers and modifiers that increase its strength and durability. FineBer is one of the best polymer coatings in Russia.

Sheathing skillfully imitates wild stone, brickwork and slate. Plinth panels are perfectly combined with modern materials for finishing facades. They can be used to decorate individual building elements: doors, windows, portals, columns, balustrades, as well as the entire facade.

FineBer siding allows you to reliably protect the basement of the house, give the building originality and respectability with minimal financial costs

Benefits of FineBer socle siding

Panels facade companies FneBer from Terna Polymer are deservedly in high demand.

Features of FineBer socle siding are distinguished by:

• The casting method makes it possible to produce siding with a relief that has increased impact strength and is stylized as natural materials. The polymer coating does not rot and does not corrode, does not crack. FineBer siding adapted to Russian frosts.

• Uniform and durable color. Facade panels are painted with two-component dyes on water based, which are resistant to ultraviolet radiation and aggressive chemical influences. Painting is carried out in 2 stages (painting and high-speed drying) on ​​automated equipment.

• Water resistance. On the surface of the polymer sheathing, mold will not appear and there will be no salt stains.

• Ease. Unlike natural stone socle siding does not load the foundation of the building.

• Respectability. Wide selection textures and color palette. The color of the polymer coating is as close as possible to natural. Plinth sheathing is combined with popular finishing materials. Houses lined with FineBer façade panels receive a completed appearance, they fit harmoniously into architectural ensembles cities and towns. Siding colors are as close as possible to natural tones.

• Environmental friendliness. The polymer coating does not emit harmful substances.

• Compliance with fire safety standards.

• Ease of installation. Installation can be done on your own. Basement siding is used to protect the basement, window / door openings and corners of the house, as well as to decorate the entire facade. Front panels are supplemented with functional additional elements.

• Ease of maintenance. Vinyl covering does not absorb grease, and dirt is washed off the skin with plain water from a garden hose.

• Warranty period of operation - 20 years.

• Affordable price.

Collections

wild stone

• colors:, terracotta, gray-green, sand, pearl, white coated;
• lenght and width plinth panel: 1117x 463 mm;
• thickness: 3 mm.

wild stone pearl wild stone sandy wild stone gray wild stone white wild stone terracotta

large stone

• colors: terracotta, sand, white coated;
• plinth panel length and width: 1080x452 mm;
• thickness: 3 mm.

Large terracotta stone Large white stone Large sandy stone Large gray stone

A rock

• colors: terracotta, brown, brown, gray-green, beige, white coated;
• panel length and width: 1085x447 mm;
• thickness: 3 mm.

White stone Brown stone Terracotta stone
Gray-green stone

Brick facing

• colors: yellow, ceramics, red;
• length and width of the plinth panel: 1125 x488 mm;
• thickness: 3 mm.

Facing brick beige Facing brick ceramic Facing brick yellow Facing brick burnt

Brick

• colors: red, brown, beige, white coated;
• thickness: 3 mm.

Slate

• colors: terracotta, sand, beige, white coated;
• plinth panel length and width: 1137x470 mm;
• thickness: 3 mm.

White slate Beige slate Terracotta slate

Rock

• colors: terracotta, sand, beige, coated white;
• plinth panel length and width: 1094x459 mm;
• thickness: 3 mm.

Brick facing BRITT

• colors: dark burgundy, dark pink (York), burgundy, brown-black;
• plinth panel length: 1130x463mm;
• thickness: 3 mm.

Additional elements

• Border length 3030 mm. Necessary for decorating the transition from the basement to the facade of the building. It is used to decorate door / window openings.

• The starting bar is 3030 mm long. securely fixes the first row of polymer panels, it is completely hidden behind the panels.

• J profile length 3030 mm. It is used for sealing joints, as well as for decorating corners, door / window openings.

• External corners 470 mm high and 115 mm wide..

Mounting

FineBer facade panels for plinth must be installed according to the instructions. For work you will need: tape measure, level, hacksaw, screwdriver, hammer, drill, Circular Saw, self-tapping screws, galvanized nails.

FineBer plinth panels are mounted on a crate made of natural wood(section of bars 45x30 mm). A metal profile is used for facing the facade of the building.

Installation on walls starts from the bottom, is carried out horizontally, from left to right. The starting bar is mounted 10 cm from the corner, after 30 cm, at the same level around the entire perimeter. The lower edges of the outer corners are attached flush with the bottom of the starting bar.

The first panel of basement siding is inserted into starting bar and slide into the groove of the outer corner. Castles with back side the panels are snapped onto the starting bar.

The siding is attached to the crate with self-tapping screws using perforation. The head of the self-tapping screw cannot be hammered tightly; a small gap should remain between it and the panel so that the siding does not undergo deformation during temperature fluctuations.

Window and door openings are decorated with a J profile and a border. The border is installed on the panel and attached to the wall at the junction of the base and the main facade. For cladding facade panels of the entire building new row basement siding is installed on the curb.

Video instructions for installing siding with your own hands.

At all times, people used to build houses a natural stone or brick, but these finishing materials at their price are not affordable for everyone. With development modern technologies they have a worthy replacement. A special place in this list is occupied by Fineber facade panels.

Fineber exterior cladding: the beauty of your building

Fineber facade panels appeared on the construction market thanks to Terna Polymer. This brand has proved to be a worthy and high-quality manufacturer. building materials. The production of panels is carried out using only high-quality raw materials and is fully tested at all stages of production.

Fineber cladding panels perfectly imitate slate, stone and brick. They are used to finish the basement of the building and their facades. They can also emphasize some fragments of the facade, for example, doors or columns.

Excellent option for finishing a country house

Such panels are very organically combined with vinyl outer cladding fineber. Embossed panels will give the facades of the building an impeccable image, while remaining publicly available, since the price for them is acceptable to almost everyone.

All this is achieved thanks to the features of production:

• the manufacturing process of Fineber panels is fully automated and practically does not require human intervention;
• there are partnership agreements with foreign suppliers of raw materials, due to which high quality siding;
• a well-thought-out process reduces costs and costs, as a result of which the panels become generally available;
• modifier additives increase resistance to temperature changes;
• at the time of production, you can change the color and structure of the plate at the request of the client.

Why Fineber panels are attractive

Taking into account the manufacturing features of Fineber facade panels, we can talk about the following advantages of this finishing material:

• light weight;
• wide choice of color of a plate;
• resistance to corrosion;
• variety of forms;
• resistance to mechanical damage and burnout;
• ease of installation;
• long time of operation;
• compliance with the quality standard;
• exposure to large temperature changes;
• the use of environmentally friendly and slow-burning material;
• natural tones and colors;
• moisture resistance.

The advantages also include the fact that Fineber has its own range of facade panels. The main series of manufactured panels:

• Series "Fineber brick", which copies the Flemish masonry, giving these a respectable and attractive look to the building. There are three colors in this category: ceramic, burnt and yellow. Our specialists especially like fineber facade panels for facing ceramic bricks;
• The Fineber Rock series is finishing material, which exactly imitates real rock. Their difference is that work with panels does not require large cash costs and is completed much faster in terms of time;
• The series "Fineber under the stone" pleases the eye with a pleasant color matching: pale pearl, terracotta, sand, gray, white.

Installation of Fineber panels

The installation of Fineber facade panels is a very time-consuming job. However, if you wish, you can do it yourself. To properly mount the panels, you must adhere to the following algorithm:

• Preparatory stage. At this stage, measurements of the structure are made, the required amount of material and accessories is calculated, and the right tools. A big plus of Fineber is that the components for these panels come with the material itself;
• Lathing installation. This stage is probably the most important, since the result depends on it. future work. A frame is made of wooden slats using a level. Minimum distance between the slats should be 60 cm, for the facade it is better to withstand 40 cm;
• Insulation mount ( mineral wool, polystyrene, etc.);
• Mounting moldings, starting corners, trims near windows and doors;
• Building paneling. Important this work run from bottom to top, left to right. The next row and wall should be started only after finishing the previous row.

Remember installed panels should move freely, they do not need to be fastened with sealant, hooked onto brackets. This can damage the slabs with temperature changes.

If you adhere to these simple rules and fulfill all the requirements, Fineber facade panels will give your home a unique look and protect it from adverse factors.

The crate must be done carefully and accurately

Installation of Fineber facade panels: video

Video on the installation of facade panels. You can learn from this lesson.