Facade panels DOCKE. Collections of facade panels Docke-R Socle panels dock and start in Petrovichi

Sheathing a house with your own hands - not the best difficult process Knowing the dimensions of the basement siding and carefully counting the number of panels, you can optimize costs and guarantee an excellent end result. Home decoration modern material will ensure durability, a consistently good appearance of the building, will allow you not to think about periodic maintenance and other trifles for decades. modern siding does not fade, dust does not penetrate the surface, manufacturers give a guarantee of 40 years for the material and special components.

How to calculate the required number of siding panels

In order to clearly define required amount finances and the specific expense of siding, you can go three ways:

  • enlist the help of professionals. The disadvantage of this method is that often the involved person is used to counting the amount of materials from a certain manufacturer, which reduces the freedom of choice;
  • use the online calculator, which can be found on many sites. There are two dangers here: focusing on specific manufacturers and a large calculation error;
  • knowing the size of the basement siding from the collection of a particular manufacturer selected for use, it is easy to calculate the number of panels and special profiles required for finishing on your own.

The last method is the most accurate. You just need to take the time and carefully consider all the subtleties. The calculation is done like this:

  • the decoration of the building is divided into rectangular, triangular and trapezoidal zones;
  • the areas of the list of finishing areas are calculated, while the corresponding indicators of window, doorways if they are on the wall, roof gable;
  • 10% is added to the area of ​​each rectangular zone, 15% - triangular, 12% - trapezoidal. This tolerance is required for waste accounting.

It is important to know

If the walls are uneven, with protruding zones, large quantity transitions, window and door openings, it is recommended to increase the tolerance for rectangular walls up to 12%, and for triangular and trapezoidal zones up to 15%.

After that, knowing the size of the basement siding, it is enough to divide the total calculated figure by the indicator usable area one panel of a specific collection of a specific manufacturer. The number of packs is also easy to calculate. The manufacturer indicates the number of panels in one package.

Siding panel sizes

Manufacturers offer their own siding sizes in specific collections. They can differ both from one name to another, and within the same set for different textures. For clarity, we give the specific dimensions of siding from popular manufacturers that can be purchased on the mass market.

Socle thermal panels Alta-Profile

The Russian manufacturer Alta-Profile is very popular, its siding is distinguished by the optimal combination of price and choice of decors. The panels are made with a tenon-groove connection system, so they allow you to get a neat, great-looking surface without visually distinguishable seams. However, when laying such siding on a triangular or trapezoidal zone, an increase in waste during cutting is possible.

Advice from the "facade"

For exact definition the number of required panels, it is recommended not only to use the mathematical method of calculation, but also to draw a layout diagram that will allow you to clearly calculate the number of finishing elements.

The manufacturer offers the following collections


The last popular series of a domestic manufacturer is Granite. Panels imitate natural stone from different quarries Russian Federation and foreign countries, the color range and surface texture are fully consistent with natural stone. The size of the siding of this collection is 1134x474x23 mm. A feature of Granite panels is not only increased thickness, but also the material of manufacture, polypropylene with increased resistance to impacts, delamination.

We offer you to get acquainted with the dimensions of additional profiles

Each panel is ductile, excellently resistant to bacterial attack and other types of microbiological grade damage.

Docke panel collection

The German manufacturer offers fairly unified solutions. Panels of this trademark divided into the following sizes:

  • collections that imitate brickwork different textures, have dimensions of 1127x461 mm;
  • collections that imitate stone blocks and hewn masonry, wild stone, have a dimension of 1196x426 mm.


The consumer is offered a huge choice. Available for purchase: collections STEIN, BURG (CASTLE), EDEL (NOBLE), FELS (ROCK), BERG (MOUNTAIN) from a set of stone textures, as well as a series of imitations of brickwork.

Features of using various types of siding

Each manufacturer puts forward a clear requirement: for laying, connecting, decorating corners, transitions, finishing in the door and window openings only components from the same brand as the siding should be used. Violation of this requirement leads to very sad consequences. The manufacturer removes the warranty on the finishing material.

This requirement is not a simple whim or a marketing ploy designed to increase the company's profits. All connecting and decorative profiles precisely match the thickness of the panels.

When using materials from one brand, installation will be convenient and simple, the siding is clearly installed in the gaps of H-planks, starting, finishing elements and other special components.

Therefore, the calculation of the cost of purchasing materials should be done based on the mandatory condition for purchasing products from one manufacturer.

Modern methods of building decoration are a set of techniques and materials that are aimed at creating a unique appearance structures, as well exclusive design. Natural stone and its many forms is a popular method of decorating a room today, which combines the main advantages building materials – affordable price, originality, ease of installation. facade dock panels - this is just such a siding under a stone, which also has European quality and an elitist, luxurious look!

Why docks are the best

Technologies of the 21st century, as well as modern German equipment and high-class foreign specialists were involved in the production of these panels. To date, Deke basement siding is the best that can be said about the decoration of the building. This product has the following advantages:

  • facade panels dock are made from polymeric materials by one-piece casting at high pressure, as a result of which the basement siding has a shelf life of up to 50 years;
  • unpretentiousness of the material - it is not necessary to paint, treat with anti-corrosion mixtures;
  • quick installation, no special knowledge and skills are needed, only alignment;
  • original appearance, used for decoration of both architectural details, and for facing the foundation or the entire facade - the scope of the material depends only on your imagination;
  • not afraid sub-zero temperatures, perfectly tolerates many defrosting cycles, moisture, high temperatures;
  • original natural textures that provide an opportunity for the most daring design solutions both inside the building and outside!

The versatility of the Docke material

Choosing basement siding , you can combine layered wild sandstone, stone and different textures of treated basement deck siding. Also available to you and mass color solutions to make your building truly luxurious!

Big advantage this material is also its strength, which is achieved through production on high-tech equipment and under the supervision of specialists!.

basement siding dock This is an indispensable thing for the exterior of any building!

Video instruction for the installation of facade panels (basement siding)

For long term and reliable protection facade from aggressive weather and mechanical influences the most suitable are durable cast base panels that perfectly imitate stone, brick. The universal dimensions of basement siding provide ease of installation, as well as the beauty and strength of this cladding for more than half a century.

Polyvinyl chloride basement siding is more massive and durable than regular vinyl siding.

Material Features

Note! The insignificant thickness of these panels is quite convenient for lining the plinth on existing cladding to level out mismatches between the plane of the facade and the plinth.

The instruction accompanying the product also lists the specific advantages of the plinth panels.

  • Plinth panels produced from high-quality polymers by casting on modern injection molding machines which increases their service life.
  • For decades, they retain their decorative and strength properties, having passed 60 test cycles.
  • Do not collapse from impacts, even chilled to -40 ° C.

Dimensions of siding Alta-Profile

In 1 set of any of the collections - 10 panels.

Collection Stone

This series has become the most in demand and favorite for exterior decoration.

  • Natural colors and the ideal structure of the panels create a successful imitation of natural stones: malachite, topaz, slate, quartzite, sandstone, burnt stone, beige, white, gray.
  • The dimensions of the panels are convenient for installation and economical in terms of waste: 1135x474x22 mm.

Related articles:

Brick

The collection is distinguished by traditionality, rigor and diversity: burnt brick, white, beige and red.

Series "Brick"

  • The structure of these panels exactly copies natural bricks, rich colors will make the facade unique.
  • The panels of this collection are lighter than the previous ones due to their smaller dimensions: 1130x468x17 mm.

Rocky Stone

  • The series delights with its high-quality relief and possible shades.
  • The panels of this collection are longer, but narrower than the previous ones: 1168x448x23 mm.

Facade Tiles

  • The structure copies exactly natural goldstone, basalt, travertine, onyx, dolomite.
  • Improved panels with special stiffeners.
  • The sizes are standard, convenient for do-it-yourself styling and economical: 1162x446 mm.

Brick Antique

  • The series conveys the majestic beauty of ancient Rome, Egypt and Greece, and absolutely corresponds to the buildings of the ancient era.
  • The panels are reinforced with frequent strong stiffening ribs, the exclusive relief of the surface is increased.
  • Standard sizes (1168x448x17 mm) facilitate installation and improve design.

Canyon

  • The rich color range of siding includes 5 original decors: Arizona, Montana, Colorado, Nevada, Kansas.
  • The elegance of the relief lines and colors of the panels from the Canyon collection will create a unique look for our home.
  • Panel length 1158 mm, width 447 mm, thickness 20 mm.

Granite

The Granite collection is an improved composition made of durable polypropylene.

The series differs from the rest in many times longer service life and other important advantages:

  • always retains decorative qualities;
  • its strength is unique: resistance to impact, delamination and swelling, plasticity, resistance to microbiological damage,

Note! In cold climates, as well as at temperatures of -50 ° - + 60 °, these panels will come in handy.

  • Universal dimensions for plinth stone siding are suitable for both the plinth and the entire facade: 1134x474 mm with an increased thickness of 23 mm.

Basement siding Decke (Döcke)

The range and price of this socle siding are varied.

But the two most popular are:

  • under the brick;
  • under the stone.

Only 4 additional elements:

  • outer corner;
  • initial and facing plank;
  • J - profile.
  • Collection Berg (Berg) under the brick has advantageous sizes- 1.127 x 0.461m.
  • The collection Stein (Stein) under sandstone is issued in the sizes 1,196 x 0,426m.
  • Panel Burg (Burg) under the stone with dimensions of 1.072 x 0.472m, convenient not only for the plinth. Collection kit included.

Collection sizes

Note! Accessories created for a specific collection fit perfectly, as the video of their installation clearly convinces us.

Döcke Extrusion regarding new company On the market facade plinth panels, but has already managed to establish itself as a solid Russian-German enterprise specializing in the production of facade and roofing materials. Raw materials and dyes for Döcke facade panels are used only by best quality from trusted German suppliers.

The company employs specialists who have undergone training in Germany and Austria, and quality control laboratories monitor the products. All materials are produced licensed and controlled by D.Ö.C.K.E. Systemlösungen Gmbh”, so the quality, as they say, is “on top”.

The various masonry ideas in the Döcke façade panel collections are inspired by the architecture of medieval Germany. Of course, nothing compares to beauty. natural stone, but such a finish is not cheap, and not everyone country house withstand the weight of natural stone. Here the Döcke facade-basement siding comes to our aid.
Facade panels "Docke" represented by four collections Berg, Burg, Stein, and Fels in German meaning: mountain, castle, stone, rock.

When developing the design of the panels, computer technologies were used to create the maximum similarity of the panels with real objects. Natural sandstone and brick were taken as a sample different texture, which means that everyone can choose something to their liking. In the Döcke collections, there are also classic brick and natural sandstone and brick manual processing, I think you will like something from this assortment, because in addition to different textures, brick and stone are also presented in different color combinations.

Like the rest polymer materials, Deck plinth panels are devoid of the shortcomings of natural stone, such as cracking, weathering, only at first glance facing stone very durable and durable material but like all natural materials it is subject to slow but certain destruction, and like all natural Decoration Materials needs periodic additional chemical treatment in the form of impregnations for the stone, and believe me, this is a lot of money.

Therefore, buying Döcke facade panels is an excellent solution for country house or dachas, just imagine the whole scope of work and funds for finishing the house with facing bricks or stone, but this problem can be easily solved with Deck facade panels. In addition to the beautiful, natural appearance of the Deck panels, they are also extremely durable.
The service life of the panels is 50 years.

The history of siding dates back to the 19th century, when the inhabitants of North America began to nail wooden planks hanging over each other in layers. Since then, this system of facing protection has been called siding. Installing basement siding is necessary for two main purposes: protecting the surface of the building from external influences(snow, rain, hail, wind) and wall decoration.

Facade panels help to quickly and easily create the "outer layer" of the house, under which you can hide the insulation. As a result, heating costs will be significantly reduced. For the basement of the object, a material that is more durable in its composition is usually used, since it is the lower part that is most often subjected to severe climatic tests: snowdrifts, mud, water.

Advantage

Docke basement siding has a number of undeniable advantages:

  • Panels can serve faithfully up to 50 years, while the color and texture will not lose their original properties.
  • The material can be mounted in a wide temperature range.
  • Siding easily tolerates minor external damage.
  • Temperature resistance in the range from +50 to -50 °C.
  • Fire resistance. In the event of a fire, Döcke siding only smolders.
  • Does not conduct electricity.
  • No toxic additives are used in the production.
  • The vagaries of nature are not afraid of panels. They are made to protect.
  • The material does not crack or delaminate.
  • There is no rotting or corrosion process.
  • Insect pests are unlikely to be interested in Döcke basement siding.
  • On the inside there is no condensation, as the panels are able to "breathe".
  • Easy to maintain: just wash the siding and it looks like new.
  • Additional reinforcement of the stiffening ribs at the Docke panels is provided.
  • The locks securely hold the panels together.
  • Subject to the correct clearances during installation, the geometry of the pattern is not violated during temperature fluctuations.
  • The appearance of the panels is very realistic, is an exact copy natural stone.

Production

The main material in the production is polyvinyl chloride. Deck facade panels differ most high performance wear resistance and preservation of shape, color and texture.

Docke basement siding is made from a mixture of polymers under high pressure. This requires special molds. Coloring is carried out in three stages, due to which it is achieved high level resistance to ultraviolet radiation.

Deck Facade Panel Collections

There are four main collections of socle siding: Berg, Burg, Stein, Fels. If translated into Russian from German, then accordingly it will turn out: a mountain, a castle, a stone, a rock (or a cliff).

Practically German manufacturers paid tribute to their love for domestic medieval castles. That is why the collections outwardly are very similar to the material from which ancient structures were built.

The design used 3D models to help recreate a more natural and realistic style of the panels. Outwardly, they resemble real stone, sandstone or hand-crafted bricks of various textures.

The Berg collection imitates classic bricks in five basic colors: brown, gray, cherry, golden, brick. With this type of finish from afar, you might think that these are real bricks.

Panel length - 1127 mm, width - 461 mm. The box contains 10 pieces, its weight is 16.7 kg. Additional elements: corners, starting strips, J-profile 30mm and metal starting.

Brown Gray Cherry Golden Brick

The Burg collection imitates hand-crafted natural stone. The base is very powerful and interesting.

Panel length - 1072 mm, width - 472 mm. There are 10 pieces in a box, its weight is 16.7 kg. Colors of Deck facade panels: wheat, olive, sand, earth, corn, linen, wool color, white, platinum, dark. Additional elements: corners, starting strips, J-profile 30mm and metal starting.

White Wool Linen Corn Olive
Sandy Platinum Wheat Dark Earthy

The Stein collection is an imitation of sandstone.

The series includes six colors: dark walnut, autumn forest, milky, amber, bronze. Deck plinth siding dimensions: length - 1196, width - 426 mm, 10 pieces in a box. Package weight (gross) - 20.6 kg. Additional elements: corners, starting strips, J-profile 30mm and metal starting.

Bronze Lactic Autumn forest dark walnut Amber Green

The Fels series looks very stern and reliable, looks like a rock of rock origin. This type of finish looks respectable and beautiful.

Color schemes: mother-of-pearl, northern rock, ivory, rye, pearl, terracotta. Siding dimensions: width - 450, length - 1150 mm. Quantity in the package - 10 pieces, its weight is 22.3 kg. Additional elements: corners, starting strips, J-profile 30mm and metal starting.

Pearl Terracotta Ivory North Rock Rye Mother-of-Pearl

Installation of front deck panels

Required Tool

  • For marking: level, tape measure, cord, pencil, square.
  • For installation: screwdriver and screwdriver.
  • For lathing and sawing: hacksaw, electric jigsaw, metal shears, cutter, grinder.

Stages of work

  • Panel mounting. Work is carried out from left to right, strictly from bottom to top. The first panel must be installed in starting bar, next panel joins on the right, it is important that the locks fit correctly into the groove. After the end of the first row, you should proceed to the second, which is higher. To new wall You can proceed only after the complete installation of the previous one.
  • Installing the starting bar. Determine the "horizon" - the lowest and highest point on the surface. Next, along the perimeter, set the starting bar. The beginning and end of the profiles must converge perfectly. To do this, you must use the water level.
  • Lathing installation. Can be used wooden beam or special galvanized profiles. But it should be borne in mind that metal tolerates the vagaries of nature better and will last longer. Guides are installed first, then rack profiles. The step between the ribs is calculated based on the surface of the building and the amount of work, but not more than 60 cm. The entire surface must be flat, otherwise it will lead the entire structure. Panels will not fit correctly. If necessary, install thermal insulation material by securing it with a membrane.
  • J-profile installation. It is used for finishing and internal corners. Self-tapping screws can only be fastened into special nail holes. It is important to put the profile evenly into the corner. At the end of the installation, the J-profile is fixed under the roof canopy. To do this, it is necessary to fix it before the main panels and during the work it can be carefully bent.
  • Corner mounting. The corners are set after the completion of each row. It is necessary. They are fixed with two screws at the top.

Video installation instructions for facade panels Docke-R


Fitting © 2022 Design and interior of apartments