How to cut plywood crafts with a jigsaw - simple drawings for beginners. What can be made from plywood? New in the world of creativity How to cut words out of plywood with a manual jigsaw

An electric jigsaw is used by home craftsmen to create beautiful plywood and wood products. Such crafts are used for a variety of purposes. They can be decorative or serve as household items. Every home master who is interested in this activity should know the features of working with the tool.

How to use the "miracle jigsaw", and what can be cut with it, you should learn more.

The subtleties of working with a jigsaw

The jigsaw is a versatile tool that is used for cutting curly products from various materials. All that is required is to choose the right canvas. It is important to figure out how to cut shapes complex shapes. Many novice craftsmen need to figure out how the bevels of the boards and various components of crafts are made. Electric jigsaws work best when cutting wood conifers. However, the thickness of the elements to be cut must not exceed 3.8 cm.

The blades that will be inserted into the jigsaw quite often bend and leave beveled edges. A straight cut is usually obtained with a well-sharpened blade. In this case, do not put too much pressure on the tool during operation.

First, run the saw at the highest speed, and then select the angle of the blade. This will result in fewer chips. In materials with increased fragility, it is necessary to drill holes. This will allow you to saw off the workpiece without unnecessary risk. As a result, no chipping of the part is formed.

To cut quickly, use coarse blades. However, it should be borne in mind that when choosing such consumables, it will subsequently be harder to sand them. Blades for electric jigsaws are made in such a way that the cut is performed when the blade moves up.

Choosing the Right Blade

Choosing a blade for an electric jigsaw is a major consideration when cutting wood and plywood. Often a jigsaw lies idle in the household of a home master. However, when you need to perform a complex pattern, this tool is needed more than ever.

Quite often, an electric jigsaw is used as a tool for cutting a hole in a countertop or during installation. kitchen sink. Such a tool is also used for cutting metal. When using other saws, it is often impossible to complete the tasks. The jigsaw is a versatile tool. It can be used by both novice and experienced House master. As a result, you can get excellent results using different materials- plastic, wood, plywood.

How to work with the tool

The jigsaw is used for a variety of tasks. Its main function is to cut curved shapes in wood products. Getting smooth curves with this tool is pretty easy. The base of the tool should be kept level on the workpiece. When the preparation is completed, you can start the main work. Then the engine is turned on and the device is slowly moved along the line marked in advance, at a distance of 2 mm from it. Fine grinding is done later.

The saw should be moved at such a pace that the blade easily cuts through the material without any deviation. The jigsaw works great for cross cutting boards. The stop must be used if you want to get a perfect cut. Bevel cuts using a jigsaw are fairly easy to make. Before work, it is necessary to firmly fix the workpiece.

If a bevel or vertical cut is being made, the distance between the blade and the stop is set to the same as on circular table. If it is necessary to perform an accurate and long cut, it is difficult to work with a jigsaw. In this case, first use circular saw. The final cutting of the element is done with a jigsaw. It must be pressed firmly against inside marked line.

Where to start

Well organized first workplace. Fulfilling this condition is especially important for high-quality cutting. If the space is arranged correctly, it will be convenient and comfortable to work. This condition is necessary to create a quality product.

The thrust structure is special machine. In the people it is called "dovetail". Such a table is made from a board rectangular shape. It has a wedge-shaped incision that goes into working area. The dovetail is attached to the edge of the table.

Work electric jigsaw carried out standing or sitting. The workpiece should be located at a distance of 40 cm from the eyes. It is necessary that the lighting lamp be installed in front of the master. It is placed at an angle to the surface.

Tool preparation

The saw blade in the jigsaw must be fixed in a strictly vertical position. The teeth should point down. Before work, it is necessary to stretch the canvas well. The degree of tension must be adjusted by compressing the frame. The device must rest against the edge of the table. Then you should tighten the lambs with pliers. When the frame is straightened, the canvas will stretch.

To cut parts with a jigsaw small size, or figures with sharp contours, you need to choose small files. In this case, it is required to use canvases with large quantity patterns per inch. When using them, the jigsaw does not jam when making turns. The saw cut is neat and thin. If large-sized plywood products are made, it is required to use canvases with large teeth.

How to cut with a jigsaw

To obtain an accurate cut, a number of conditions must be met:

• The hand that holds the jigsaw should only move vertically.
• All movements must be performed as smoothly as possible, without jerking. In addition, they must be performed with maximum amplitude. This is necessary to use the entire canvas.
• The workpiece smoothly rotates with the second hand during operation.
• Do not apply too much pressure on the workpiece. Side pressure on the blade is unacceptable.
• Artistic sawing is carried out only when the file moves from top to bottom. For this reason, the reverse movement must be carried out without pressure.

At work manual jigsaw it must be conducted not along the marked line. The canvas should be drawn along the inside of the contour. This is due to the presence of a cut after sawing. After completing the work, one of the clamps should be loosened. The frame of the device should not lose elasticity.

jewelry box

You can make a beautiful and roomy jewelry box for Valentine's Day or International Women's Day. To complete this craft, you will need to use precise drawing. The work is divided into several stages.

Work area preparation

Before you start cutting out the details of the box, you should prepare your working space. For this, a special table is installed. On it, crafts will be created. The following rules are followed:

• There should be no unnecessary items at the table while working.
• The cutting tool should always be at hand. There is a specific place for it.
• Workbench. It is placed in a ventilated area. The room should be light and spacious.

However, it is not always possible to install a jigsaw table in the right place. To ordinary apartment the workbench is usually placed on the balcony if it is insulated. At the same time, you can work on crafts in any weather.

Choice of plywood

For the box, you need to use a plywood sheet. When a workpiece is selected, attention should be paid to quite often appearing defects - cracks or knots. The workpiece is selected with a thickness indicated in the diagram. To transfer the drawing to the material, you should:

• Process the workpiece with sandpaper. You should start with coarse-grained material. This processing ends sandpaper with small grains.
• The surface needs to be level. To do this, you need to fix the sandpaper in grinding device. If not, you can take a small bar and wrap it with sandpaper.
• Produce grinding along the layers of wood.
• The workpiece is polished until its surface is as smooth as possible.

After such preparation, the craft template should be transferred to it.

Transferring the template to the plywood sheet

Before starting cutting, transfer the prepared drawing to a plywood blank. First you have to print the drawing on paper. To transfer, you must have a tracing paper and a pen. First, the template is attached to the workpiece with adhesive tape. Having a blank in front of you, you should think about how to cut out different elements of the box, saving the available material as much as possible.

sawing out the casket

While cutting, you need to follow some rules:

• The jigsaw should be perpendicular to the product.
• It is necessary to ensure that all movements are performed as smoothly as possible. You should not rush while cutting - this way you can make a mistake and ruin a piece of material.
• A cutting table must be used.
• First you need to cut internal elements. Only after that they start cutting the contour.

When leaving the cut line, it is necessary to correct the line with a needle file during the assembly of the product.

Advice! In the process of work, the hands will get tired. In this case, performance drops significantly. Fingers and eyes are seriously tired. All this can lead to hand injuries. That is why it is necessary to take breaks at work.

Assembling the box

Before assembly, please read the drawing of the product. Combining the details of the jewelry box does not require fine work. Before gluing different elements you need to make sure that they can be put together without problems. After several assemblies of the product without any difficulties, you should start gluing the parts. Usually, a PVA composition is used for this purpose. During operation, it is necessary to eliminate smudges of glue.

Assembling a locomotive model

When the material is prepared and the drawing is printed, the process of transferring the scheme to the workpiece should begin. In this case, it is necessary to take into account some rules of work. Many home craftsmen tend to transfer the drawing to plywood using only copy and pencil. However, you can use the "Black Ribbon". When this tool is selected, the drawing is glued to the workpiece. Then the scheme is washed off the plywood with water, which allows you to leave only the marking lines.

Then you can make holes in the details of the future steam locomotive. In the details of the locomotive there are parts of the grooves, sawn from the inside. To make such elements, holes should be made in them. hand drill or an awl. The holes must be at least 1 mm in diameter. In order not to spoil the surface of the table when creating holes, place a plank under the workpiece.

Now you can cut out the details. Do not rush when cutting. The basic rule is to hold the jigsaw at a right angle to the workpiece being processed. All elements must be performed smoothly, avoiding irregularities.

What is plywood carving? This question, perhaps, arose among many novice masters. Plywood carving is an arts and crafts.There are several types slotted thread for plywood:

• openwork;
• cutting out an image on a painted plywood sheet;
• sawing;
• combination (for example, openwork method + sawing).

Where to begin

• A plywood sheet is used as a blank, on the surface of which there should not be any defects. As a rule, first-class and second-class sheets of glued wood veneer are used for these purposes.
• In order to carve plywood with a jigsaw, use a material whose thickness is in the range of 3-12 millimeters. The size of the glued veneer sheet depends on the image that should be applied to it.

It is important to know! Cut a sheet of glued veneer along the grain, not across. Therefore, the base must be cut in such a way that the lines of the picture are located along the outer layer.

• Before painting the workpiece, it is necessary to clean the plywood with a file. This process should be along the edge. Otherwise, sheets of glued veneer will begin to crumble.
• With the help of sandpaper (they use fine-grained and coarse-grained), the surface of the sheet is polished, on which the picture will be cut. Begin to process with a fine-grained knife. The result is smooth surface. After grinding, the base should be wiped damp cloth(thus eliminating working dust).
• Used for painting dark tones: blue, grey, black. To do this, you can use ordinary paints: gouache or watercolor. However, over time, such paints fade, so it is recommended to use nitro paint. Such coloring composition lays down well. This composition dries for about half an hour.

Important point! Nitro paint, acrylic dyes and gouache are only suitable for contouring. To apply a shadow picture, it is necessary to cover the base with an aqueous solution.

• After the pattern is cut out, its edges should be carefully sanded with sandpaper.

In order to carry out high-quality carving on plywood, you need to think about the drawings in advance. The selected drawing can be printed on a printer or drawn with your own hands immediately on a plywood sheet. They also make carving with a jigsaw on plywood according to a template.

You can also use calque. Through it, a picture is transferred, which is applied to the workpiece. This method is considered the simplest.

Important! Every novice craftsman must remember that the process of creating plywood carvings with a jigsaw begins with drawings. Carving plywood with a jigsaw, the drawings and templates of which will correspond to what was intended, will turn out to be the most attractive.

Necessary tools for work

First of all, it is worth noting that the tool for cutting material should be selected from steel. Steel cutters are considered more durable. Drills, pieces of wire, needle files or reamers will do.

It is also worth paying attention to sharpening. The tool must be well sharpened, otherwise the plywood will become unusable.

First, you should make a small hole into which the chips will fall in the process of cutting the material.

To carry out slotted carving on plywood with a jigsaw / laser carving on plywood, you will need flat, semicircular and triangular cutters.

Important! The tool must be set at a 45 degree angle.

So, for work you will need:

• sandpaper (coarse-grained and fine-grained);
• file, brace, jigsaw;
• coloring composition, varnish;
• incisors and swab.

How to make a blank

Before proceeding with the manufacture of the workpiece, it is necessary to prepare the workplace. The table on which the workpiece will be made must be durable. If during the work the table accidentally moves or staggers, then all the work will go to the mark. Lighting must be good.

Stages:

1. Clamp the cutter with one hand, hold the blade with the other. In this case, the handle of the tool should rest against the palm of your hand. The little finger on the second hand controls the angle of the blade.
2. In the process of cutting curved lines, the slope is not done. The pressure exerted on the tool must be controlled. This is necessary so that all lines are the same width.
3. After the image has been applied, varnish should be applied in several layers. However, the second coat of bark needs to be applied only after the first coat has completely dried.

If the cut carving on plywood with a jigsaw corresponds to the drawings, then the master did everything right.

Openwork way

Work process:

1. The drawing is applied using a pre-prepared template.
2. Carry out sawing. Then mark the guide holes.
3. Carry out cutting along the inner contour.
4. Using sandpaper, the cut elements are polished.
5. Fix the workpiece securely. Then mark the places where you need to make holes. To do this, use a rotator. If you need to make small holes, use an awl.
6. After the work done, the picture is sawed off along the contour. Then the product is cleaned and polished.
7. Sawing is carried out using an electric or ordinary jigsaw.

Sawing

It is worth noting that the work process is practically no different from the previous methods. However, many believe that this method is the simplest and most understandable. Sawing is carried out using a conventional jigsaw or electric.

It is worth noting that at the factories, cutting out elements is performed using a laser.

In order for the cutting to turn out attractive, you must be able to work with a jigsaw.

Process:

1. The selected image is applied to the plywood sheet. A novice master first needs to choose something simpler, where it will not be necessary to cut out internal holes with smooth lines.
2. The workpiece is securely fixed with clamps. If they are not, then you can do without them.
3. The saw should be perpendicular to the plane of the base. You need to cut evenly. The hand should move in the direction of the contour being cut.
4. Using sandpaper, the product is polished. You should also take care of the edges.
5. The product is painted or varnished.

Why is plywood used to create carvings

Currently, such material is actively used not only in the manufacture decorative elements, it is also used in the manufacture of furniture, subfloor, wall decoration, ceiling and more.

This material is chosen for many reasons:

• not afraid of moisture;
• temperature fluctuations do not have a negative impact on plywood;
• low cost (as opposed to solid wood the price of a plywood sheet is much lower);
• ease of use;
• light weight.

It is also worth noting that for the manufacture of crafts and furniture, where carving will be present, it is necessary to choose first-class or second-rate plywood. The remaining varieties (3.4) are not suitable for such creativity, since there are cracks, chips, knots on the surface.

Finally

If plywood was carved strictly following the instructions, while taking into account all the features of cutting and material, then the result will be a product that will deserve everyone's attention. With the help of such crafts, you can not only decorate the interior, but also present it as a gift.

However, in addition to the fact that as a result you can get beautiful product The process itself is very interesting and exciting.

All photos from the article

Fans of all kinds of needlework should definitely pay attention to this kind of arts and crafts, like cutting on plywood. In this way, you can make all kinds of figures, patterns and other decorative elements.

Moreover, it is quite simple to master such a technique, the only thing is that you first need to familiarize yourself with its main nuances, which we will do below.

What do you need to cut

First of all, consider what tool you need for this. It should be said right away that expensive plywood cutting equipment is not required. Therefore, anyone can do this kind of work.

The only thing you need to prepare the following tool:

• jigsaw;
• electric drill and brace;
• scissors;
• cardboard templates;
• needle files.

In the photo - a manual jigsaw

In addition, various expendable materials, such as the:

• sandpaper, for grinding saw cut places;
• tracing paper;
• the pencils;
• glue;
• acrylic paints, etc.

In addition, it is necessary to prepare a workplace. Since working with any wood materials implies the presence of sawdust and unnecessary scraps, it is advisable to equip the workplace not in a residential area, but, for example, in a garage.

The workplace itself is a table. It is advisable to attach a stand for a jigsaw to it, which can be made from a plank. It is also necessary to ensure good local lighting workplace.

Cutting Features

Material selection

As you know, plywood is a multilayer material that consists of several layers of veneer. This makes it great for creativity.

The only thing you need to choose the right type of plywood. To do this, you need to pay attention to the following parameters:

What to cut

As a rule, people who encounter such work for the first time are interested in what can be cut out of plywood?

There are a lot of options - these can be:

• patterns for decorating furniture or other interior elements;
• panel on the wall;
• decorative inscriptions;
• all kinds of figurines, toys for children, etc.

Advice! You can also make functional carved objects from plywood, for example, caskets, candlesticks, napkin holders, lamps and much more.

Of course, you should start by cutting out the most simple products to "get your hands on it". After gaining experience, you can take on work of any complexity.

cutting process

After preparing the workplace and materials, we proceed directly to the cutting itself.

The instructions for doing this work look like this:

1. First of all, you need to make an image of the future product. You can make them yourself, or find them online and print them out. It must be said that templates must be prepared even before cutting out words from plywood with simple outlines, as this will greatly simplify the work and increase its quality.

You can also prepare simple templates in advance. geometric shapes different sizes to, for example, quickly cut a circle out of plywood or a square;

1. then the images should be transferred to cardboard, for example, using carbon paper;
2. now you need to cut out templates from cardboard;
3. further prepared templates must be placed on a plywood sheet and circled with a pencil. If the pattern is large enough, it can be fixed with tape or even glue;
4. now let's start cutting. If you need to cut the edge of plywood beautifully, giving it smooth shapes, you can use a jigsaw. More subtle and hard work, for example, small openwork patterns should be cut with a manual jigsaw.

To make internal cuts, you must first drill a hole. Depending on the subtlety of the work, for this you can use an electric drill or a brace;

1. after cutting is completed, it is necessary to process the saw cuts with sandpaper. To correct the lines, you can use needle files;
2. then the product must be sanded. If it consists of several parts, they must be glued, for example, with PVA or wood glue.

Advice! Novice craftsmen are often interested in experts - how to cut even circle from plywood? In fact, there are no secrets in this operation, the main thing is to correctly apply a circle to the material using a template or a compass, and then carefully and slowly cut it out with a jigsaw.

This completes the cutting process. Now the product can be decorated - painted with paints, applied with a burner or simply varnished.

Advice! Word templates for plywood cutting can be prepared in a text editor such as Word. This will allow you to select the most suitable size and font.

Here, in fact, are all the main nuances of this work.

Conclusion

Sawing plywood with a jigsaw is a much simpler task than, for example, woodcarving. Therefore, in order to achieve good results It doesn't take years to master the skill. You just need to do the work carefully, adhering to the above recommendations.

The video in this article contains Additional information on the given topic. If some points are not clear to you, you can leave your questions in the comments, and we will be happy to answer them.

When it is necessary to cut something out of plywood, many people are interested in the question, how to cut plywood? It is impossible to answer this question unambiguously, because there are different methods and tools for different purposes. In this article, we will talk about the most popular ways to cut plywood.

Cutting plywood

This procedure is carried out in several ways. The easiest and most affordable is to use hand saw. However, since the plywood sheet is quite dense, even when compared to an ordinary spruce board, it will take a lot of effort to cut the plywood. For this reason, this method is only suitable for thin sheets of plywood. An electric circular saw can act as a substitute for a hand saw. AT living conditions this option is quite effective and makes it possible to cut both thin and thick sheets of plywood without much difficulty. The disadvantage of this method can be called cutting only in a straight line. At curly cutting such a tool produces a lot of chips.

When it is necessary to carry out curly carving from plywood in a large volume, then you should pay attention to specialized equipment. Lasers and milling machines make it possible to obtain a high-quality product.

A few tips:

• sawing should be carried out only on dry material. High level moisture causes an increase in the resistance of plywood. As a result, during excessive force, the veneer may delaminate or the saw blade may break.
• replace the saw or cutting blade necessary immediately after signs of blunting of the teeth are detected
• when cutting with a jigsaw to create clean and even ends, the main cut lines should be placed along the line of the veneer grains
• a rune jigsaw is more convenient when working across the fibers. Although it turns out a little more chips, the risk of clamping the file and leaving it away from the drawn line is reduced.
• when transferring a pattern for cutting to a workpiece, you need to place the stencil in such a way that the parts to be removed are located in areas with flaws, for example, knots, chips.

Curly cutting methods

How to work with a jigsaw:

• first of all, you need to print drawings or stencils that are transferred to the workpiece using carbon paper
• to create through sections, you need to do thin drill starting holes
• a file or a jigsaw blade is inserted into the holes obtained, the free edge of which must be fixed with a mounting screw or clamp
• after that, a cut is made along the marked lines. At this time, you need to firmly press the workpiece to the workbench
• at the end of sawing, you need to remove the extra parts and process the finished item with a file or sandpaper.

Creation round hole on a milling machine:

• standard line, which is part of milling machine must be fixed in the center of the circle with a self-tapping screw
• if the ruler is not long enough, then it is worth creating a simple bracket from metal profile or wooden planks
• by rotating the cutter along a fixed radius, a groove is selected along the circumference, as a result of which an almost perfectly even hole is obtained
• when calculating the diameter of the circle, it is necessary to take into account the dimensions of the working cutter. More exact figures are contained in the instructions for the device.

Such a device is great for cutting circles, as well as individual arcs - for example, for creating grooves for furniture brackets. The milling unit is great for working with thick sheets of plywood. A complex pattern cannot be cut out with such a device, but a circle or an arc can be easily cut.

Decorative wood panels are a real classic, give nobility and are considered a sign great taste. Wall carved plywood panels are affordable and durable material for creating unique interior. Plywood sheet is the basis for applying veneer from natural wood valuable types of wood, for example, oak, ash and others. These products are attractive appearance, low cost, strength, flexibility and ease of processing. In addition, this material is resistant to chipping and damage during cutting patterns.

People who prefer to create their own decor items can master the craft artistic cutting. Wood is a material that allows you to create genre paintings and decorative compositions. Such products can become a decoration of your own home, and you can also give them to friends. Today wooden crafts at the height of its popularity. Woodcarving lessons in in large numbers are present on the Internet.

Plywood is a wonderful material for those who like to do everything with their own hands. And it's not about repairing the floor or walls. And about various household items for the home, accessories and crafts. Which are obtained by some masters so original and beautiful that sometimes they even surprise them. Therefore, even as a gift to present such things is not ashamed. And what can be done from plywood, we will tell you and show you with examples.

Plywood coasters

This is one of the few things that you can cut out with your own hands using a jigsaw from a small piece of plywood. Stands are designed to make a person's life more convenient. For example, a plywood laptop stand, as shown in the first photo below. It is able not only to bring comfort, but also to maintain health, because with its help you can work in different positions and not only sitting, but lying down and even standing.

And the option in the second photo will not only make working with a laptop comfortable, but also protect the device from overheating.

These things won't cost much if you make them. with my own hands. After all, plywood costs quite a lot of money.

But the bowl stand will do comfortable life pets. Simple design and the availability of material allows you to implement everything very quickly.

For children, you can make such a creative stand for pens and pencils from plywood. The product is so original that it is unlikely that the child will pay attention to what it is made of.

And so that the phone, keys, charger and other little things are not scattered throughout the house, such a thing made of plywood will help maintain order. When everything has a certain place, it is always easier and faster to find the right thing.

As you can see, there is a lot that can be made from plywood scraps for the home. And here is the next confirmation - this wooden gift, adults will already appreciate it. The bottle stand is made from very narrow pieces of plywood, but it looks stylish at the same time.

Therefore, if even narrow pieces remain, do not throw them away, it is worth fantasizing over them, you might be able to come up with something original. Even if you have everything, you can always make things for sale from plywood, because today Hand-Made products are in demand and highly valued.

tea storage idea

Tired of keeping tea bags in a packing box?! Then such a storage house will replace it. With it, a zest will appear in the kitchen and the space will be transformed with such beauty. Every housewife will surely like such a house for tea.

Support for flowers

Human imagination has no limits, so some plywood crafts for the home are more like a work of art. For example, here is this elegant flower stand in the form of a carriage. Only horses and coachmen are missing.

Clock cut out of plywood

Simple round form, the absence of numbers, but the presence of wood - all this is very useful for an interior in the style of modern minimalism or eco. It is easy to make them with your own hands from plywood, it is enough to have an electric or manual jigsaw. And the clock mechanism can also be removed from old obsolete watches, but the hands can be cut out of cardboard or thin plywood. You can decorate them to your taste with ordinary paints.

By the way, such watches can be easily transformed using the technique of burning or decoupage. You just need to decide on the picture.

Volumetric paintings from plywood

The author of the paintings, in the photo below, is Maria Ostashova. Her favorite subject is pop art plywood paintings. Her work is truly original and very colorful. She works in 3D technology. Surely such products require painstaking work. But, as they say, the result is worth it. It is in such things that the professionalism and love of the author for his craft is truly felt.

And here's another one beautiful work from another workshop. Such aesthetic plywood paintings cannot but be liked, so you can not only decorate your interior with them, but also safely give them. The main thing is to choose the right theme.

Plywood panel

Walls can be decorated with paintings, posters, or you can make 3D panels. Of course, it will be very difficult to do something like in the photo, especially with a manual jigsaw, and it will take quite a lot of time. But this idea can be implemented on a smaller scale. It is only necessary to prepare a drawing according to which the templates will be cut.

Piggy banks are different, but we present to your attention an unusual one - a money box for banknotes. If you are saving for own house, then such a symbolic and beautiful copy will not only accommodate right amount money, but also remind you of the goal and will certainly motivate its achievement.

Thus, you can make a reduced one with your own hands or on order. exact copy project the house you dream about and literally start investing in it. Is not it interesting idea!?

What else can be cut out of plywood for the house?

If you are strongly inspired and carried away by this material, then why not for own house do not make and door handles. This is the case when even the smallest pieces of plywood will go into action. Handles can be made both double-sided and single-sided.

A mirror in the bathroom or hallway with plywood is also easy to make. The main thing that needs to be made of plywood in this case is the base on which the mirror itself will be attached. Well, then a decorative overlay is cut out of it. Here, as they say - whatever comes to mind.

Plywood furniture for the home is popular today due to the great interest in the hand-made industry. All more people tries not to buy standard cabinet furniture, but make it themselves. Such creative expression It is also useful for the safety of the budget.

For example, none furniture store You won't find a creative horse shelving unit like this one.

Some plywood furniture ideas are incredibly complex, while others are distinguished by their concise simplicity. As a rule, in the first case, these are developments professional designers.

Round plywood shelf a good place to store cosmetics.

Garden swing chair

What else can be made from plywood? Of course, lamps, both for the home and for street lighting under the roof: desktop, floor, suspended. Plywood products fully compete with other materials, but at the same time they have a unique advantage - they are made of wood.

Not practical but aesthetically pleasing

When there is free time, why not give in to a creative impulse and cut out something for the soul from plywood, for example, figurines of birds and animals. Yes, they cannot be applied practically, but with their help you can fill the house with warmth and a fairy tale.

And you can make plywood figurines for a summer residence. This is a great alternative to plaster options. By filling your garden with characters from cartoons and fairy tales, you will not only transform the site, but also have fun with your children.