Decoration of the gas pipe in the kitchen. How to hide a gas pipe with a drywall box. How to hide a gas pipe. Video

how to hide gas pipe on the kitchen

When repairs are carried out kitchen area, the question often arises of how to hide gas pipes. And this situation will arise in any case, since even in the most unusual and extravagant design the gas pipe may not fit into the room. That is why it is worth considering ways to hide it. You don’t need to give up, if nothing good comes to mind, you should try to get out of this situation beautifully.

So, the ways to hide the gas pipe are as follows :

1. Close the gas system furniture set. In this case, it will be necessary to order special fake models, with a void inside, for example, wall cabinets. They will help to hide the pipes inside and they will remain easily accessible.

2. Independently build an object that visually resembles a closet, but without direct functional tasks. It could be. His task will only include decoration. This solution to the problem is also quite convenient, since it does not interfere with access to the gas system, which is important and, perhaps, the main thing for people's safety.

3. You can use a metal screen that is suspended and covers the pipes. In most cases, such products are used to hide the heating system.

4. Most economical option pipe painting is considered. It is better to choose a paint color that matches with colors room interior. Visually, the gas pipes will be invisible, will not attract attention.

There are also other methods to give aesthetics to gas pipes. More about them.

It must be understood that before installing any decorative elements, it is necessary to consult with a gas specialist, since not all items can ensure absolute safety. It must be remembered that it is also forbidden to blindly hide the gas system, since in the event of a gas leak, it will accumulate in the gap between the wall and decorative element, tightly installed. And this is fraught with disastrous consequences, one of which is a gas explosion.

Drywall box

The unattractive appearance of gas pipes makes it difficult to create an interesting interior atmosphere, and can also be an obstacle to arranging the desired furniture and kitchen appliances. The problem of hiding gas system solvable. The most common way to disguise it is to install a special box that will disguise it. It is made of drywall. Now in more detail about the process of building such an element.

Necessary materials and building equipment :

1. Drywall sheets (it is better to purchase a material that is resistant to a humid environment);

2. Vertical profiles;

3. A device for tightening self-tapping screws;

4. Several self-tapping screws;

5. metal.

All necessary Construction Materials can be purchased in absolutely any hardware store, there is no shortage of materials.

Action algorithm

So, you need to follow the following processes :

1. Initially determine the dimensional parameters of the planned duct, since the goal of all measures is to securely close the gas pipes, but if necessary, and easy access to them.

2. In right areas it is necessary to establish a vertical profile and subsequently measure the gap between the elements.

3. Then create markings on drywall sheets, thereby creating blanks, which then need to be cut with metal scissors.

4. Fasten the prepared parts to the profiles with self-tapping screws.

5. If necessary, eliminate irregularities and gaps in the docking areas. It is possible to do this using mounting foam, the excess of which is finally removed.

So, after the work done, the main part of the masking measures is ready.

Now start decorating front side boxes. Kinds finishing works may be different. The main thing here is to do everything in accordance with the interior of the kitchen, so that the created element is in harmony with it.

The advantages of this method of closing pipes include :

1. Easy to create and install the box;

2. Aesthetic appearance.

The disadvantages include :

1. Loss of useful areas of the premises, which is not very acceptable for small areas of the premises. There, every centimeter matters a lot.

2. Violations of the safety regulations, since the gas system must be available at any time of the day.

3. In case of repair work, the dismantling of such a structure is inevitable.

Furniture elements and wall cabinet

Such cabinets are furniture snags, they do not have back walls. By the way, pipes running vertically can be successfully closed with pencil cases, and placed horizontally on shelves kitchen furniture. When creating furniture projects, furniture makers always take into account all communication lines available in the room, making special cases and cabinets, which subsequently mask the gas system.

If New furniture is not included in your plans, you can make a wall cabinet with your own hands. Please note that never and under no circumstances should gas lines be used to install a wall cabinet.

It should be noted that an unattractive and space-consuming counter can also be closed in a closet. The main thing is the creation and selection of the created element, which fits perfectly in size. It should be noted that the geyser should not be placed in a cabinet, as this requires a powerful ventilation system.

An unusual way to disguise pipes

There are cases when in houses the gas valve is installed at a level of seventy-five centimeters from floor covering, so it is often located under the countertop. Many prefer to build in this case a countertop, which is removed if necessary.

With this method of disguise, getting to the valve is quite simple, and in the tabletop itself, drill a passage that will be located above the valve. The mechanism is light, the handle, which is fixed on the pipe. A cut is created at the bottom of the pipe, which is then put on the crane.

It turns out that with the help of such a handle you can easily and quickly block from the countertop. This, of course, is very unusual, but such a disguise will not violate safety standards and regulations, and, accordingly, gas workers will not express any complaints.

railing element

Sometimes you can see that gas communications are located along the main wall of the kitchen (apron). Often pipes are located between wall cabinets and tabletop. In such a situation, railing systems are perfect for interior composition. These are devices with which shelves, a dryer, hooks for various needs and other necessary little things for the kitchen are placed on the walls. Then the gas pipes will serve as a structural element of the railing element itself.

To fit gas lines under the roof rails, you need :

1. Clean the pipes to a metal shine.

2. Paint them in several layers of chrome paint.

3. Dream up and place all kinds of accessories and fixtures over the pipes, these can be towel holders, shelves and hooks. In addition, it is required to place them in such a way as to create the appearance that they are installed directly on the pipes.

Decoration of gas communications

If, nevertheless, there is no traction, creating clutter from drywall (for example, if there is a small area in the kitchen) and the method of hiding pipes using canopy cabinets does not suit you, then solving the issue of masking pipes will help them decorate. That is, to turn gas pipes into unusual elements of an interior solution.

In the case of pipes with a large diameter, the use of mosaics can be a very interesting option. Such a pipe will certainly become interesting and stylish accent in the interior. You can also show your artistic abilities by painting gas products interesting patterns, use applications. Such products will become quite an original highlight.

In addition, the pipe can be painted to match the color of a birch trunk, and the walls can be decorated with painted leaves. It is quite possible to do it yourself, but if in doubt, you should use the services of professional decorators or an artistic master.

Among other things, decorate the pipes using the original decoupage technique. And the materials spent for this idea will need little, just napkins in several layers with interesting patterns, glue and varnish (to add shine).

So, to create decoupage, you must do the following :

1. First, the pipes need to be cleaned and then painted.

2. Having moistened the napkins in the glue, carefully remove the layer with the pattern.

3. Applying it to the pipes, gently smooth out the pattern.

4. After the wipes have dried, it is necessary to varnish the surface.

It should be borne in mind that there are a large number of patterns for such equipment, so you need to purchase the pattern that will best suit the interior of the kitchen.

But if you still can’t come up with anything, it doesn’t hurt to turn to specialists. They will definitely help you get out of this situation.

Conclusions on important nuances

1. It is necessary to pay attention to the fact that, in accordance with all norms and rules, the gas system and meters are installed in prominent places.

2. The gas system must be freely accessible at all times. And this is not discussed, since gas workers must, if necessary, urgently shut off the gas supply and carry out the necessary repairs.

3. Remember that it is forbidden to carry gas lines on your own. Only if there is a permit, then it is allowed to transfer.

4. If it was decided to close the pipes with cabinets, models that do not have rear walls are selected. In this case, cuts for hoses are made horizontally at the top and bottom. The counter can also be covered behind the facade of the cabinet, but you must remember that it is easily accessible.

5. Even at the stage of repair work, it is worth taking care of all the gas nuances, consulting with the gas service about the transfer of pipes, about the design of the kitchen and the location of the gas system in it.

6. Remember safety. Nothing is more important than her. Let it be better that the interior is not the same as planned, but all safety standards will be observed. By the way, in some rooms, in general, it is impossible to mask pipes.

7. You need to fantasize, there are many options for disguising pipes. Pick up required option taking into account the advice of gas service specialists. The main thing is that the option meets the security requirements.

Pipelines of various plans: water, gas, heating, sewerage or ventilation are an indispensable element of equipment. However, the aesthetics of communications is a more than controversial issue. This is especially acute in the working areas: the kitchen, the toilet and the bathroom, since in these small rooms there is the greatest amount of communication.

Hiding pipelines is not always possible and not always easy.

Gas pipes: requirements

To supply gas in apartments, GOST allows the use of two types of pipeline.

• Steel is the most common option. Despite the small diameter, it is gas pipes that cause the greatest dislike, since their placement depends only on the cost-effectiveness of installation. If the water supply and sewerage are located almost at floor level, then the gas pipeline is in the middle of the wall.

• Copper - from an aesthetic point of view, much more attractive. As a rule, they do not try to hide copper gas pipelines, but use them as design elements. In the photo - copper communications in the interior of the loft.

The main inconvenience in their design is the need to maintain quick and easy access to any site. This is a mandatory requirement of SNiP, and non-compliance with it threatens with an administrative fine.

How to hide a gas pipeline

The interior of the kitchen is quite democratic. Precisely because its components are necessarily both communications and kitchen equipment, and numerous other appliances that have nowhere else to place in the apartment: for example, a heating boiler or a washing machine.

You can hide or mask them if you wish.

Wall installation

Such installation is acceptable, although not in all cases. The gas pipeline is laid in specially made strobes in the walls and is covered with shields made of lightweight materials - plastic, drywall, and so on.

Mandatory conditions:

• the shield should be easily removed, its rigid fastening to the wall is unacceptable;
• the panel is made of non-combustible or non-combustible material;
• counter, regulating and locking elements should be placed in plain sight.

Shields are selected according to the color and texture of the finish. Gypsum boards are especially promising for this, as they allow painting, plastering and even tiling.

Plasterboard boxes

If laying in the wall is not possible: the nature of the wall does not allow, the pipeline intersects with another communication system, or it was simply not possible to obtain permission, then you can hide the gas pipe in another way.

From metal profile and drywall, decorative boxes are made, inside which the gas pipeline is located. Finishing can be very diverse.

It is allowed to use special plastic boxes if the material meets the fire safety requirements. In the photo - a variant of drywall.

Kitchen set

You can hide the gas pipeline with the help of furniture. Hanging cabinets and gas pipes quite often end up on the same section of the wall. True, such a disguise will require some modification, but it also kills two birds with one stone: communications are hidden, and access to them remains completely free.

Various methods are used:

• wall cabinets are mounted without a rear wall or with an offset wall;
• horizontal elements of the pipeline are placed under the shelves of the cabinets;
• vertical pipes can be hidden in a pencil case;
• the gas meter can be placed in one of the items in the kitchen.

What cannot be hidden in a locker is geyser and a heating boiler, since both appliances heat up noticeably.

Pipeline painting

The simplest, most affordable, but, frankly, ineffective method to hide communications. The effect is based on the selection of a shade that exactly matches the color of the finish on the wall.

No less often, the gas pipeline is frivolously painted in White color: so the pipes look like an element of kitchen equipment.

In a high-tech or minimalist kitchen, the gas pipeline can be painted in a contrasting color. In this case, it is a design element.

Sometimes they resort to applying patterns or ornaments. In this case, two different approaches are used: they select a pattern for decoration - an ornament on wallpaper or tiles, or create a bright unusual option, catchy. In the photo - a "designer" gas conduit in the kitchen.

original methods

In this case, it is worth talking not about how to hide the pipe, but rather how to use it.

• In loft, hi-tech, Scandinavian or Provence styles, there is no need to hide communications. What is welcome in the loft steel color, for Provence or Scandinavian, it is better to paint the gas pipe in bronze. Copper piping, of course, is used as an element of the interior.
• The gas pipeline can be decorated with interior mosaics. The method is laborious, but original.
• It is possible to block communications with hinged metal panels, if this solution allows the interior of the kitchen.

If the gas pipeline is installed above the working surfaces of the headset, then you can disguise it as a railing - hinged system with hooks for utensils. The railing is mounted side by side, forming a single visual whole with the gas pipeline. Of course, nothing can be attached to the pipe itself.

This article is an attempt to clearly explain that a resident apartment building can do it with his own hands with an internal gas pipeline in his apartment. I will pay attention to the restrictions set out in normative documentation, and I will tell you about my own practical experience regarding how and with what you can move the gas pipe in the kitchen. So, let's go.

Hands off!

Let's talk about prohibitions first. Yes, yes, dear reader, I have no doubt that you are full of enthusiasm and eager to carry out the transfer of the gas pipe in the kitchen yourself. However, take the restrictions I have listed as seriously as possible:

• You can not move the gas riser in the kitchen. All you can do is change where the branch is attached to it or the length of this branch;

• Do not use indoors polyethylene and in general plastic pipes . SNiP 2.04.08-87 in clause 4.85 expressly states that polyethylene is prohibited for laying in residential buildings, and in clause 6.2 it indicates what materials should be used;

Extract from SNiP: gas pipelines from steel pipes should be installed inside buildings and structures. To connect gas appliances, it is permissible to use rubber or rubber-fabric sleeves (read - reinforced gas hoses). However, it is still recommended to use hard eyeliners.

• It is impossible to block common cork, Ball Valves and gate valves on inputs and risers of gas supply. If at the time when you turn off the gas, someone cooks food, the fire will go out, and after starting it will continue to flow into the kitchen. The result of such a development of events is usually described in TV reports by bystanders: there is no one among the residents to tell about it;

Captain Evidence suggests: for any work related to disconnecting the riser and carried out by specialists gas services, it is necessary that the tenants of all apartments were at home. At launch, all tenants are notified about it personally.

• Finally, the main thing: PB (safety rules) 12-368-00 prohibit any gas-hazardous work carried out by persons who have not passed instructions and exams on safe methods conducting work.

Simply put: only a representative of Gorgaz or a licensed service company should connect any gas appliances. gas equipment.

What will happen

If you are fabulously lucky and you, without having the necessary knowledge and practical experience, do not allow gas leaks, your amateur performance will be revealed at the first scheduled inspection of gas equipment by representatives of the gas service.

The consequences are unpredictable: they can both turn a blind eye to the work you have done, and draw up a protocol on an administrative offense that endangered the life and health of people.

Worst scenario... Comrades, I won't spoil your mood. What is a gas explosion in a residential building - everyone represents.

fly in the ointment

There are two reasons:

1. Timing. Drafting and approval may take three to four months;
2. Price. The project, together with the work, will cost from 10 to 40 - 50 thousand rubles.

Only shhh

So, what to do if you are still very impatient to move the gas stove or shorten the gas pipe outlet?

Theory

No, no, mon ami, do not rush to pick up the keys and the hacksaw. In the beginning - a little tedious, but necessary for familiarization with regulatory requirements.

The norms for a gas pipe in the kitchen are set out in the document I have already mentioned - SNiP 2.04.08-87.

• Gas distribution in a residential building must be performed predominantly at the weld. Threaded and other collapsible connections are allowed only on connections to shut-off valves, gas meters and consumer devices;

On the practical side, this means for us that the internal gas pipeline in the apartment cannot be assembled from pieces. Climbing to the gas pipeline with welding, not being able to completely turn it off, really, is not worth it.
Another nuance: this paragraph of SNiP does not completely prohibit the use of collapsible connections, but only recommends refraining from them.

• Everything detachable connections must be carried out in places accessible for inspection and repair. You should not hide them in non-separable kitchen furniture;
• The gas pipe must be laid, as a rule, openly;
• If there are several gas consumers, shut-off valves must be installed in front of each of them;
• In places of passage of people (for example, above or in the hallway), the gas pipe must run at a height of at least 220 centimeters. What is the instruction connected with - I think you can not explain;
• Steel internal gas pipelines are recommended to be painted for corrosion protection. At the same time, the decor of the gas pipe in the kitchen or in the hallway must be waterproof.

Practice

After tap

First and foremost: in the vast majority of cases, you don’t need to cut or cut anything. To transfer the slab, it is enough to lengthen the connection between it and the shut-off valve. To hide the untidy steel eyeliner, you can simply build a cabinet around it (of course, collapsible or with wide-opening doors).

How can I attach a stove or other gas appliance without violating the requirements of SNiP?

Corrugated stainless steel pipe. In this case, the key requirements will be met:

• The connection to the device will be rigid (corrugated stainless pipe clearly has nothing to do with hoses);
• Wiring will be done steel pipe. Who's to say that stainless steel is not steel?

When corrugated stainless pipe has not yet appeared on Russian market, I successfully transferred gas stoves oxygen or acetylene hose on steel or brass fittings.
To fix the hose on the fitting, an aluminum clamp was used for a screwdriver.

Stainless steel connections are mounted on compression fittings: the pipe is inserted into the fitting with a loose union nut, after which it is tightened and compresses the pipe with a silicone sealant.

The threads on the connections of the fittings with the plate branch pipe and the tap are wound up with FUM tape.

At start-up, all detachable connections must be checked for gas leaks: soap suds are applied to each of them with a brush. If it bubbles, the connection needs to be sorted out.

Do not test connections with a lit match. It's not a matter of safety: for a gas to explode, you need its mixture with air in sufficient concentration.
The fact is that in small concentrations, with minor leaks, it simply does not catch fire.

Faucet replacement

Soviet-style gas plug valves are not very convenient to use and need regular maintenance. In particular, the cork must be liberally lubricated. The lubricant fills the grooves to prevent gas leaks and reduces the force required to turn the plug.

Can I change the faucet myself?

If so, the rate of gas outflow from the pipe will be minimal, and the pressure will not prevent the installation of a new valve instead of the old one.

The replacement algorithm looks like this:

All work is carried out only with the machines turned off in electrical panel and with the windows wide open.
Violation of this simple and clear rule may cause a gas explosion.

What to change the gas valve? On a modern cork. Its purpose for gas is indicated by the yellow marking of the handle.

Thread cutting

How to cut a gas pipe in the kitchen and cut a thread on it?

With due observance of safety rules, this work is no more dangerous than the previous one:

1. We are preparing a tool - a hacksaw for metal, a rough file and a die according to the diameter of the pipe (as a rule, the connection to the stove has a size of DN 15). In addition to the tool, you will need a FUM tape and any lubricant - up to motor mining or a solarium;
2. We make a wooden or rubber chopstick according to the size of the pipe. Its dimensions should not prevent you from threading outer surface cut eyeliner;
3. We de-energize the whole apartment. Namely, automatic machines, and not switches and cords pulled out of the socket. Any accidental spark can be fatal;
4. We open wide all the windows in the apartment;
5. We disassemble the squeegee, remove the crane and insert a chopik in its place;
6. With a file, we remove the outer chamfer on the pipe at an angle of 15 - 20 degrees to its longitudinal axis. This will be the entry for the die;
7. We lubricate the entry and the first few centimeters of the eyeliner;
8. We put the die with a guide frame on the eyeliner;

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

• Some Features
• Gypsum board construction
• Kitchen furniture as a disguise
  • We decorate the gas pipe in the kitchen
• Important points that require special attention

Repair in the kitchen always raises many questions, the solution of which will help create a cozy and comfortable environment. It is very important to equip the kitchen with a sufficient number of sockets, replace plumbing and sewer pipes. All these elements will be hidden in furniture or walls.

In many apartments and houses where gas is the source of cooking, the big issue is the gas pipe, which can run through almost all rooms. According to safety regulations, there are certain standards for its location, so it is not possible to simply move it to another place. Therefore, the question always arises of how to hide the gas pipe so that it does not spoil the overall interior.

Some Features

Hiding it is actually not as difficult as it might seem at first glance. There are many options that will effectively close unwanted objects.

The gas pipe in the kitchen can be hidden under the furniture. If it passes at a height, it is worth ordering wall cabinets with special recesses or cutouts in which the gas pipe is freely located. This option allows you to leave access to it, moreover, it will not be visible from the outside.

The second option could be a false box. Such a design will perform an exclusively aesthetic function. At the same time, all the main elements of the system remain open, as required by safety regulations.

The most economical, but less effective, way is painting. In order for it not to stand out too much against the background of the wall, it is worth using the same paint color as the wall near which the gas system passes.

There are other more effective options in order to hide the gas system.

Back to index

Gypsum board construction

When creating an interior in a kitchen, a gas pipeline system can become a big obstacle. It can become an obstacle to the normal arrangement of furniture or interfere with the normal installation household appliances. To solve this problem is real, you only need a desire.

by the most effective method is the creation of a drywall box. In order to create such a design, you need to prepare:

Scheme for decorating a gas pipe with a plasterboard box: 1 - frame made of steel profile, 2 - sheathing made of drywall sheets, 3 - stiffener made of steel profile, 4 - engineering communications pipes.

• drywall sheets, for the kitchen it is better to use moisture resistant ones;
• metal profile;
• screwdriver for fixing elements;
• self-tapping screws, it is better to take with a margin;
• scissors for cutting a profile, a knife for cutting drywall.

You can buy all the tools and materials without any problems at any hardware store.

Before starting to mount the structure, it is necessary to take measurements and carry out calculations. The box should not be too bulky, but if necessary, the gas pipe should be accessible. We mount a metal profile structure. It is very important that it is securely fixed to the wall. Sheathed all plasterboard sheets.

Such a structure must be prepared before facing. For this, putty is used. All joints are very important to glue plaster mesh, it will increase the strength of the putty layer. Any material can be used as a facing, the main thing is that it is combined with the entire interior.

Advantages of a drywall box:

• good appearance;
• ease of installation.

Disadvantages of drywall boxes:

• such a design may take usable area, especially it will be noticeable in a small kitchen;
• safety precautions may be violated, since the gas pipe is partially closed, and access to it is complicated;
• if it is necessary to inspect or repair the gas system, such a structure will be completely dismantled.

Back to index

Kitchen furniture as a disguise

The gas pipe can be decorated with kitchen accessories.

You can hide the gas pipe in the kitchen without problems in kitchen furniture. Vertical pipes can be easily positioned in vertical cabinets, and horizontal - along the lockers. This option will be possible if the furniture is made to order. It is then that all communications are taken into account.

In this way, you can hide the gas meter, it will be located in a wall cabinet. If you plan to place a geyser in such a cabinet, it is important to equip a very good ventilation system. Otherwise, this method of masking the heating system cannot be used.

It is important to remember that it is strictly forbidden to hang any headset and furniture on a gas pipe. It is also very important to control the distance between it and the wall cabinets if they are located above the pipe.

In no case is any pressure from above on the pipe allowed. Therefore, when fixing lockers, it is very important to make sure that they are a little higher.

Quite often, a gas pipe can run along the entire wall, moreover, through the apron area, and it is impossible to close it with furniture or a drywall box. In this case, you can use a technology such as railing.

Railing is a system designed for hanging various dryers, shelves and other small things. In this case, the pipe will protrude constructive element the entire railing system.

In order to make a railing from a pipe, it must be polished to a shine and coated with paint with a chrome effect in several layers. After that, over it you need to fix various hooks for towels, kitchen utensils, interesting shelves for spices. It is very important to place such elements above the pipe, in no case should they be installed on the gas pipe itself, this is unacceptable for safety reasons.

Unfortunately, the presence of open pipes does not add sophistication to the interior of the kitchen. And if the sewer and drainpipe can be hidden in special strobes in the wall or floor, then the gas pipe, in accordance with safety requirements, must be located outside. How to aesthetically decorate or hide it will interest everyone who independently makes repairs in the kitchen. In our article - ideas on how to close the gas pipe in the kitchen with detailed photos.

The choice of how to solve this problem depends on:

• from the location of the gas pipe in the room;
• from the stylistic features of the interior;
• kitchen layouts;
• availability of material resources.

Consider the most popular decoration options.

Railing system as a way to decorate a gas pipe

The use of a railing system in the kitchen saves space and creates comfortable conditions when cooking, since the most used utensils are always at hand, hung on hooks and hangers.

The gas pipe can be used as a railing system if it is horizontal on the wall and runs along working surface countertops, immediately below the hanging cabinets kitchen set. To do this, first the pipe must be carefully cleaned, and then coated with chrome or bronzing paint. After the paint has dried, attach hooks for kitchen utensils to the pipe.

Attention! This option is possible only if the utensils are few and light in weight.

The gas pipe can also be hidden using real roof rails if placed in such a way that the pipe is between them and the wall. To make the gas pipe less noticeable, it is painted in color kitchen apron or in the color of the railing.

How to hide a gas pipe with a drywall box

A box made of drywall sheets will hide a vertical gas pipe. Having even a little experience with this material will allow you to make the design of the box yourself.

Attention! Drywall - perfect solution to create a pipe box, it is inexpensive, allows you to make a design of any size and shape, can be easily installed in any part of the kitchen, giving an aesthetic look to the room.

For its manufacture you will need materials and tools:

• moisture resistant drywall
• drywall knife
• profile rack profile CD
• metal scissors
• perforator
• self-tapping screws
• screwdriver
• docking tape
• putty
• set of spatulas
• roulette
• building level

Using a drywall box is the most common way to hide pipes:

1. Install profiles in accordance with the location of gas communications. Based on them, assemble the frame. At the same time, on all sides of the frame of the future box, it is necessary to fix the transverse crossbars - this will give the structure the necessary rigidity.
2. Cut blanks of drywall parts, taking into account the required dimensions.
3. Perform the installation of parts using self-tapping screws, slightly drowning them in the plane of the plasterboard walls.
4. To create the effect of solidity in this design, glue the joints of drywall parts with a docking tape.
5. The surface of the box must be puttied and cleaned.
6. Then it can be painted to match the walls, decorated with ceramic tiles, mosaics or wallpapered.
7. To have access to the gas meter or valve located inside the box, a secret door must be installed on the box.

The disadvantage of this method is:

• non-compliance with safety requirements;
• even with a special door, access to the pipe is quite complicated;
• irrational use kitchen space in small spaces.

Attention! A gas pipe box can also be made using plastic, wooden beams, plywood or chipboard. The design of the box, made of chipboard, is perfect for small kitchen, especially if the pipe runs in close proximity to the stove.

Using kitchen cabinets to hide the gas pipe

A reliable way to hide a gas pipe without violating the integrity of the interior is to use kitchen cabinets. Hanging cabinets without a back wall will hide a horizontally located pipe, a pencil case - a vertical pipe.

Making a custom-made kitchen set will allow you to take into account all the features of the location of the gas pipe: the absence of a back wall near the cabinet or a special cutout on back wall at the entry and exit points of the pipe.

So that the pipe is not visible through the doors of kitchen furniture, it is necessary that they be deaf or made in the form of a lattice.

This practical and convenient method has several advantages over the box:

1. Free and quick access to the gas meter.
2. Compliance with safety regulations.

The only relatively acceptable option for hiding a geyser is to place it in a frame that is open at the top and bottom. The size of the frame should be wider than the column, and the facade that hides it from prying eyes is made in the form of a lattice.

Budget options for decorating a gas pipe

Via special paint it is not difficult to turn a gas pipe in the kitchen into a stylish art object if you approach the painting process creatively:

1. The pipe will become less noticeable if it is painted to match the walls. To do this, the surface of the pipe must be cleaned of old paint. Then primed, cleaned sandpaper and paint.
2. Having painted the pipe bright color, you can revive the interior by playing in contrast with the color of the walls. Depending on the style of the kitchen, you can choose interesting option: imitation of a birch trunk for a kitchen in ethnic or rustic style, or segmented painting for a bright modern kitchen.
3. Wrap the pipe tightly with a thick hemp rope or twine with a beautiful smooth texture. This decorating style is perfect for kitchen interior in eco-style or ethno-style. The advantage of this method is the easy replacement of the coating with a new one during operation.
4. Use a gas pipe to display a collection of magnets.
5. Wrap the pipe with garlands of artificial flowers.
6. Bamboo stems, selected according to the size of the gas pipe, will make it more attractive. If the pipe is painted to match the color of bamboo stems, then they form a single composition.

Advice! To paint a gas pipe for a high-tech kitchen interior, you can choose a paint that imitates a chrome coating.

5 original ideas for decorating a gas pipe

Using various decorative techniques, you can originally decorate the gas pipe:

1. Close with a chrome pipe. Why is the gas hose passed inside the tube. It is important that the diameter of the pipe exceeds the diameter of the gas hose.
2. Decorate with a mosaic, overlaid with colored stones, fragments of ceramics.
3. The gas pipe will acquire an aesthetic appearance if it is covered with paintings in accordance with common style premises. For example, painting a gas pipe folk ornaments will perfectly fit into the interior of the kitchen in a rustic style; an image of cherry blossoms or bamboo stalks would be appropriate for a kitchen interior in Japanese style. Alternatively, you can decorate the gas pipe by copying the picture ceramic tiles from which the apron or floor in the kitchen is made.
4. Using the decoupage technique, it can be covered with interesting patterns. The material for decoupage can be ordinary napkins with a pattern you like. To decorate a gas pipe in this technique, it must first be cleaned, and the napkins should be divided in layers. Only used for decoration. upper layer patterned napkins. Apply glue to the pipe, then wrap the pipe with napkins, again apply a layer of glue already on top of the napkins. After drying, the decorated pipe should be varnished. Instead of napkins, you can also use the remnants of wallpaper with which the walls of the kitchen are pasted over. Using decoupage to decorate a gas pipe would be appropriate if it is located at some distance from the stove.

Advice! The process of performing decoupage on a pipe will become easier if, instead of napkins or wallpaper, you use a special decoupage film, which is sold in handicraft stores.

The variety of methods presented will effectively hide the gas pipe in the kitchen. Having chosen the decoration option in accordance with their taste and capabilities, everyone can do it on their own or involve a specialist for this purpose.

How to hide a gas pipe in the kitchen - video

Gas pipe masking - photo