Planning repairs in the most necessary and multifunctional room, have you ever wondered what can ruin the look of any bathroom the most? It's not about scattered towels and other mess, and not even about its proper design.

Sewer and water pipes passing along the walls are covered with moisture, darken, plus the unpleasant noise of flowing water or excess pressure in the pipes.

Gone are the days when bathroom renovation was limited to painting walls and a bath cabinet. I would like to give the hygiene room some style, and protruding pipes do not fit with this style.

We will not reinvent the wheel, there are several proven ways to hide pipes in the bathroom.

Installing pipes in the wall is the perfect way to fix pipes in a bathroom, especially for a new bathroom.

To begin with, we will determine what kind of wiring we need. Usually in the bathroom there are three points of supply - drainage of water:

• sink
• bath
• and washing machine.

The intended outlets of the pipes must be marked on the wall.

With plumbing, everything is simple, but when installing the sewer, it must be taken into account that the pipes are inclined towards the riser in the toilet.

The lowest point of the drain is the bathroom, pipes from the sink and washing machine adjacent to the sink in the bathroom. The farthest point is the washing machine.

Before immuring pipes in a wall, you need to figure out for which types of pipes and their connections this method can be used. If possible, then cast iron pipes it is better to replace with metal-plastic ones.

Hidden in the walls

• Steel pipes connected by welding.
• Brazed copper.
• Proven clamped press fittings on metal-plastic.
• Fittings for cross-linked polyethylene.

They are not hidden in the walls:

• Threaded connections of any pipes (cast iron, metal-plastic).
• Threaded fittings on metal-plastic.

Water finds its way in the weakest compounds. And if it’s hard not to notice a clear threat, then a fitting closed in a screed, under a tile, will first “warn” the neighbors about the repair of their bath at your expense. Yes, and to eliminate the accident at home is the same as new renovation bathroom arrange.

When planning a repair, draw a wiring diagram. The shorter the path from the pipe to the mixer and the fewer bends, the better.

You need to pay attention to:

• Pipe diameter.
• Screed layer, reinforcement, waterproofing.
• Type of walls, suitability for flashing.
• Pipe route.

Installation of pipes in the wall involves storming. This option is not suitable for:

• Horizontal shading of panel walls.
• Shtorbleniya thin brick walls(in half a brick).

On the walls of non-capital communications can be laid in grooves (strobes), and on the floor - in a screed. Guarantee period operation - 50 years, especially since today's pipes do not sweat and do not rust. The groove can be sawn with a grinder or done with a chisel.

When the wall is made of drywall, the wiring is done before the panels are installed. Cutting holes if necessary is not difficult. When wiring, you need to take into account the thickness of the tile or sheet.

The next stage is the plastering of pipes. Now you can veneer.

When the place behind the bathroom is not lined, the pipes from the washing machine can be hidden into the wall and not hidden, but attached to the wall with clamps. Holes for pipes must be taken into account accurately and adjusted so that there are no large gaps, and the mixer closes them. Facing the bath, we close the access to the siphon with a hatch.

Plasterboard boxes

With a non-standard area of ​​\u200b\u200bthe bathroom, you can do some redevelopment and hide the pipes under drywall. Under the low podium for the bath, you can hide the entire wiring.

How to close the pipes in the bathroom with drywall?

Pipe boxes in the bathroom are sheathed with moisture-resistant drywall or plastic panels. For the frame, you can take wooden blocks 30×40 treated with impregnation 2 times or metallic profile and secure with screws. Outside, we close the frame with drywall with a door or panel for approaches to the riser and valves.

To access the cranes - inspection hatches, they usually buy 200 × 300 - according to the width of the tile; to the filter system - two hatches 600 × 600.

The box can be painted, pasted over with a film or tile.

under tiles

A more solid option would be facing closed pipes tiles. To do this, we prepare the base in the form of two frames made of thin wooden slats. The length of the first frame is equal to the length of the closed area, and the width is equal to the width of the tile.

For the second frame, the length is the same, the width is reduced by the thickness of the rail.

The frames are connected to each other by the sides. The resulting structure is sheathed with plywood or other lightweight material. A mesh is laid on top - the base under the tile.

Behind the pipes it is necessary to fix the support bars: measure the desired length and wedge it between the pipes and the wall. We put on the manufactured casing on the pipes.

disguise behind furniture

How to decorate or disguise pipes in the bathroom?

Another idea how to hide sewer pipes in the bathroom, they will be prompted in furniture stores where bathroom sets are sold. In modern stylish lockers and bedside tables, it is enough to cut holes to hide the laid pipes.

But where pipes are always high humidity, this is an additional condition when buying a headset. You can treat the edges of the holes with moisture-proof materials or provide the bathroom with additional ventilation and climate control.

The hygienic organization of the bathroom space requires a special approach. Mounting methods can be combined, but do not lay pipes where self-tapping screws can get into them!

Before finishing, all tracks must be transferred to paper with an indication of the dimensions, or at least photographed so that in the future there will not be a nail under the hanger.

Beauty is important, but engineering Communication allow concealed installation only when you are sure of its quality.

You can't do without communication systems in the bathroom. However, water and sewer pipes are unlikely to give your room an aesthetic appearance. Therefore, most residents, in the process of repair, try to hide all communications. To implement the plan, there are several ways: hide the pipes with furniture, boxes, shutters or wall them up in the wall. When choosing a masking option, it is worth considering the possibility Maintenance communications. So that in the event of a breakdown, you do not have to break the decor of the room. By installing a pipe box in the bathroom, you can make a collapsible structure or build small doors for access to communications.

Depending on the location of the mains, the box can be installed in two ways: closing only the pipes or the entire wall on which they are located. In the first option, by closing only those areas where there are pipes, you save on material. Sewing the entire plane on which the highways are located looks more aesthetically pleasing, but reduces the usable area of ​​​​the bathroom. In order to somehow use the space in the box not occupied by pipes, small storage facilities are built there for various things.

What is the best box to make?

Before closing unsightly communications, it is necessary to choose the right material for the box, behind which pipes in the bathroom will be hidden. It must meet several requirements:

• be sufficiently resistant to moisture;
• have a small weight and thickness;
• made from environmentally friendly ingredients that do not emit harmful substances.

According to these criteria, from commercially available materials for the manufacture of a box in the bathroom, you can use: MDF, moisture-resistant plywood, moisture-resistant drywall or plastic.

Preparatory stage

Most often, problems with the pipeline occur at the junctions. Therefore, the fewer, the better. If the box is installed after laying new pipes, care must be taken to ensure that the line has as few connections as possible. If the replacement of the pipeline is not included in your plans, before hiding the pipes in the bathroom, it is necessary to conduct a thorough inspection of them. Inspect all lines for defects and, if any, eliminate them.

It is believed that without fear of leaks, soldered and welded joints can be closed. But fittings with threaded connections should have free access. They need to be checked periodically. Therefore, threaded connections cannot be walled up. It is also necessary to provide free access to valves, sewer revisions, meters, filters.

Making a box step by step

Installation of the box in the bathroom consists of several stages. Let's consider each of them in more detail.

Measuring and sizing a structure

Before sealing pipes, you need to make necessary measurements and specify the location of the box. In places of unreliable connections, to meters and valves, it is necessary to provide a removable part or a door. A floor plan on a scale will not interfere, on which all structural details will be marked. In the process of measuring, do not forget about the thickness of the finishing material.

Having defined the contour future design on the floor, using a plumb line, transfer it to the ceiling, and then make markings on the walls.

Mounting the frame for subsequent sheathing

Before sewing communications into the box, it is necessary to install a frame around the pipes. It is best to make it from a galvanized profile. Since the air in the bathroom is constantly humid, the use of wooden blocks is undesirable. If you still decide to use them, choose bars made of decay-resistant rocks. And before use, treat everything wooden details antiseptic.

The adhesion of the frame elements to each other is carried out with self-tapping screws or with the help of a cutter. To fix the profile to the wall, dowels and euro screws are used.

It is necessary to mount the profiles to the wall, taking into account that the finishing material subsequently does not adhere closely to the pipes

The first step is to mount the profile on the walls. Then install the racks forming the front face.

Depending on the design of the future box, there may be several or only one A-pillars. They are attached using their own curved edge or suspensions.

After that, the guides are mounted on the ceiling and floor.

It is convenient to fasten vertical and horizontal profiles to each other using a cutter

If the length of the racks is more than 1.5 m, it is necessary to make jumpers between them. They will also be needed for a frame whose width is more than 0.25 m. The distance between the jumpers is made no more than a meter.

For structural strength, jumpers are attached to racks with a height of more than 1.5 m

Using wooden frame treat cut points construction mastic. This will protect the box from damage and prevent its deformation during temperature and humidity fluctuations.

Sheathing the frame of the box with sheet material

When cutting out the details for the box, try to make whole elements, and not from pieces. First, cut the side pieces. They are cut in such a way that the edges do not protrude beyond the frame profiles, but are flush with them. After that, cut out the front of the box. It should cover the side elements.

After cutting the material, it is mounted to the racks. Do it with self-tapping screws (3.5-4.5 cm). The distance between them should be no more than 2.5 cm. Such a box will have sufficient strength, so it is not necessary to attach the material to the jumpers. For control weaknesses pipelines leave inspection holes with doors.

An opening must be left in the box for free access to valves, meters and filters. It can be buried with a door purchased from a hardware store.

You can build them yourself or buy ready-made ones. For handmade places of access to pipes make a door from the material that is used for the box itself. So that it does not open, furniture magnets are fixed on them.

The door for the control hole can be finished with the same material as the entire box. So it will be less noticeable

You can make a fully collapsible box. To do this, sheets of finishing material are attached to the screws to the very edge. By producing final finishing, they are not covered with tiles.

Finally, plastic corners or a plinth are fixed. When it will be necessary to dismantle the box, remove the plinth, unscrew the screws and remove the finishing material.

Self-tapping screws, closed plastic corner, are easily unscrewed to dismantle the box in case of emergency. After that, the box remains intact and can be mounted in place

Final decorative finish

The final stage of the installation of the box is its finishing. It depends on the material from which the structure is made. Plywood, drywall and MDF can be veneered ceramic tiles or color. Plastic panels do not need further finishing. They look pretty attractive on their own. Unlike drywall, plastic does not reduce the area of ​​\u200b\u200bthe room.

To decorate the bath, a frame is constructed from a profile

In the same way, the pipes are closed under the bath itself. First, the frame is mounted, and then it is sheathed, leaving the control doors.

Moisture-resistant drywall is mounted on top of the frame from the profile and tiles are mounted on it. Be sure to leave a door for pipe maintenance

Now knowing how to mount the box, you can decorate any pipes in the bathroom and make the room more attractive from an aesthetic point of view. Hiding communications in the bathroom improves the design of the room. In addition, after closing the pipes with a box, the noise level emanating from them is reduced.

Video example of these finishing works

Very many, planning high-quality and modern renovation in the bathroom, be sure to pay special attention to piping. The first question that arises in early stages planning is how to hide the pipes in the bathroom in such a way that they do not take up free space and at the same time are hidden from the eyes as much as possible. In this article we will answer this question and show examples in the photo.

Before closing the pipes in the bathroom, it is necessary to decide in what way they will be closed, while taking into account the features of the building, the size of the room and financial possibilities. The first step is to decide what type of wiring will be, open or closed. Only after that you can decide whether to hide the pipes in the bathroom in the walls, in floor screed or in special drywall boxes.

Before you remove the pipes in the bathroom, you need to choose the type of wiring based on the number of consumers in the room and the distance between them. To date, there are two main types of wiring:

• collector;
• consistent.

The collector type of wiring is used in cases where many consumers are installed in the bathroom. So that they do not suffer from lack of water or pressure as a result joint work, each of them is supplied with a separate line from the main distributor. Hiding pipes in the bathroom with this scheme requires a large number places, since the system is quite voluminous.

The series circuit is used in small spaces with several consumers, to which water is supplied from a common main through separate branches. So when the valve in the washbasin is open, the pressure in shower mixer decreases significantly if it is located farther down the pipe. Such wiring takes up little space and open pipes in the bathroom can be easily hidden in the wall or under the screed.

Hidden or open wiring

At this stage, you must choose whether to close the pipes in the bathroom tightly or leave them open. If the room is spacious and allows you to arrange open wiring in special boxes without tangible loss free space, then this type of wiring is usually used. But if the bathroom has limited space, then here we hide the pipes in the bathroom in such a way as to free up the maximum usable area. The choice of wiring depends on which pipes will be used in the plumbing of the room.

Important! For styling concealed wiring walls need to be chipped. However, the breach of integrity load-bearing structures Absolutely forbidden. Therefore, before hiding the riser in the bathroom, you need to make sure that the wall is load-bearing.

It is also worth considering that not all pipes are able to provide reliable connection on the long years and in this case, before blocking the pipes in the bathroom, it is necessary to provide free access to the connection areas for technical inspection or repair in case of leakage. For hiding under a screed or finishing materials only fit poly propylene pipes where the connection is made by hot soldering. Seal pipes in the bathroom from other materials with crimp or threaded connections Not recommended.

Rules for laying hidden wiring

In order for the renovated bathroom to look as spacious as possible and all of its plumbing elements work perfectly, it is necessary to follow a number of basic rules when planning wiring:

• use as few connections as possible when drawing up a diagram and laying;
• when soldering polypropylene pipes, the material of the pipes themselves and the connecting fittings must be the same;
• before hiding the pipes in the bathroom, it is imperative to provide for inspection holes at the joints or installation of additional units for quick access during maintenance.

Important! If we hide the pipes in the bathroom using any type of wiring, it is advisable to provide hot and cold pipes with insulating materials to prevent condensation.

Options for masking pipes in the bathroom

To date, there are several main types of masking pipelines and sewers from the eyes. The most common are:

• installation of highways concrete screed On the floor;
• disguise using furniture elements;
• laying highways in the wall;
• boxes and niches made of drywall or wood.

Each of the options answers the question of how to hide communications in the bathroom and below we will consider them in more detail.

Laying in concrete screed

This wiring method is the most practical and easy to implement, since it allows you to lay highways along the shortest path. Before you wall up the pipes in the bathroom under the screed, you need to consider what will lie on top floor tiles and access to highways will be completely blocked. Therefore, you only need to apply polypropylene pipes with thermal insulation, so that condensation does not form and the hot main does not lose heat. The masking of pipes in the bathroom in this way is carried out in cases where the walls in the room are load-bearing and their removal is impossible.

Important! If an electric floor heating system is used in the room, then before closing the riser in the bathroom with a screed, the lines must be laid around the perimeter of the room so that the pipes do not intersect with heating elements gender.

It is also worth remembering that propylene pipes tend to expand when heated. In order to provide sufficient space for expansion, before hiding the pipes in the bathroom, in addition to thermal insulation, a corrugated sheath is installed on the main, which gives enough space for thermal deformation. Before covering the pipes in the bathroom with cement, you need to make sure that the thickness of the screed is sufficient to completely close the pipes and create flat surface under tiling.

Closing pipes with furniture

The use of furniture elements as pipe lining in the bathroom is also a very common camouflage option. If part of the line is laid in a screed, and the outgoing pipes exit vertically along the outer part of the wall, then it is enough to purchase cabinets of the desired height and, before covering the pipes in the bathroom, remove back wall and cut holes for pipes. After that, the cabinet leans against the wall and covers the visible part of the highway. However, this option cannot always be implemented beautifully, and usually bare pipes in cabinets quickly collect condensate. In such cases, before closing the riser in the bathroom with furniture elements, it is necessary to additionally insulate the pipes.

Installation of wiring in the wall

This does not mean sewing pipes in the bathroom in finished wall the method of chipping, and the installation of highways in the wall during the construction of a house or redevelopment of a room with the construction of new partitions. Ready panel walls, often the thickness of the slab is not enough for the complete laying of pipes. Before you hide communications in the bathroom during panel construction, you need to make sure that work wall is not a carrier. AT load-bearing walls only vertical cutting is allowed.

During the construction of walls or the construction of new partitions, before sealing the pipes in the bathroom by laying in the wall, polypropylene pipes with thermal insulation and corrugated protection are also used. The pipes are laid in advance in the space between the bricks and filled with mortar so that voids do not form.

Boxes and niches for closing pipelines

Closing the pipes in a drywall bathroom is the first solution that comes to mind when other masking options are not possible, since this option is the fastest and most convenient to implement. Creating a box is the simplest, fastest and least expensive idea, but it has a significant drawback. The pipe box in the bathroom takes up extra space, and this is very noticeable, especially in small rooms.

Before closing the communications in the bathroom with plasterboard or wood, a special frame is created from aluminum profiles or wooden bars. Then this design is sewn up with plastic panels, drywall, ceramic tiles or decorative wood according to the design of the room. The pipe box in the bathroom allows you to create inspection hatches in the right places through which it will be made technical inspection or repair communications.

Important! If you already have to create such structures in small rooms, then before sewing up the pipes in the bathroom, carefully consider the design of the box and try to use it inner space for storage household chemicals, mop, broom and other household items.

Use of decorative screens and overlays

Before disguising the pipes in the bathroom, you should pay attention to such modern products as decorative screens or overlays that allow you to simultaneously hide the pipes and decorate the interior of the room. Screens for pipes in the bathroom are ear-ready frames different sizes with guide skids along which plastic or glass doors move. The price of such products is not high and they are mounted very quickly. Their use significantly speeds up the process and they are mainly used as inspection hatches for important plumbing components and provide quick access to them.

Also, pipes in the bathroom can be closed with special decorative overlays, which are made mainly of plastic or wood. Pipe linings in the bathroom may have different variants colors or imitate materials such as stone, marble, wood. Such products will good decision for those who do not know how to hide the riser in the bathroom quickly and beautifully.

This material can be used as a guide for those who still cannot decide where to hide the pipes in the bathroom saving space or simply updating appearance bathroom.

Without communication systems it is impossible to equip a bathroom. However, sewer and water pipes are unlikely to contribute to the aesthetic appearance of the room. For this reason, most homeowners in the renovation process set the goal, how to hide pipes in the bathroom. Today, there are several ways to solve such a problem, ranging from masking communications in the wall to decorative design with furniture.

Hidden piping in the bathroom will save scarce space and create an aesthetic interior.

The need for disguise

Before thinking about how to hide pipes, you need to understand the type of communications wiring. As a rule, in the bathroom there are three points for draining and supplying drains:

• wash basin;
• washing machine;
• bath.

Having determined what kind of plumbing will be installed in the room, you should apply accurate markings on the wall in the places where you plan the outlet for the pipes. The lowest point of water flow is the drain from the bathroom. When planning it, it is important to take care that the pipes are at a slight slope.

With plumbing, as a rule, there is no particular difficulty, however, when laying sewer pipes, it is important that the communications go at an angle in the direction of the riser. plums washing machine and washbasin can be connected to the tub pipes. However, when planning, it is worth considering the options for the output of pipes - this can be done through the wall of the lining of the bathroom itself or through the wall of the room.

A well-thought-out communications branching scheme will allow you to choose best way pipe masking.

Solution number 1: hide the pipes in the wall

This approach is the most correct from an aesthetic point of view, because. communications hidden in the wall are completely invisible and practically inaccessible. This method of masking pipes is carried out on initial stage repair, because close the pipes in the wall and do no damage fine finish will not work. The essence of the method lies in the fact that a special gate is made in the wall, in which communications are placed.

Important! It should be understood that walling all the pipes into the wall will not work. For example, a sewer bed or riser with a diameter of 110 mm will not physically fit into the wall. And it is forbidden to make a deeper strobe, because. this will be a gross violation of the integrity of the wall and the structure of the house as a whole. For this reason, masking in the wall is suitable for hidden communications, the diameter of which does not exceed 50 mm..

In the process of developing channels for pipes on the wall, it is necessary to make a special markup, according to which the strobe will be made. The size of the cavity should be such that the communications fit perfectly in it, and in the case of a branch of hot water pipes, it will also be necessary to make the strobe a little wider so that the pipe expanded when heated does not rest against the walls of the channel. Then the products are laid in the path made for them and fixed with special fasteners so that they can be revetted in the future.

Important! It is strictly forbidden to leave the gates open. It is necessary to close them qualitatively cement mortar. Also, pipelines must be securely fixed with special fasteners - clamps and clips.

You can completely hide the following communications:

• pipes made of brazed copper;
• plastic plumbing;
• steel communications and their welded joints;
• metal-plastic press fittings, crimped with special tongs.

Masking such pipes in a bathroom or toilet is completely safe, since the homeowner will not be afraid of a break in communications, premature wear, etc. Their connections are reliable, and the material allows them to be used for decades.

• threaded fittings on a metal-plastic basis, which are assembled with keys;
• threaded connections of steel pipes.

Chasing and laying pipes into walls is the most time-consuming, but aesthetic camouflage option.

Solution number 2: drywall and plastic boxes

Unlike the previous masking method, the construction of the box - great option in order to hide sun loungers and risers of large diameter. With it, you can hide entire clusters of pipelines and make beautiful cladding under overall design rooms.

There are two options for communication boxes - plastic and drywall. What is the difference between them? A plastic box is more practical in terms of quick access to hidden piping. In case of emergency, it can be disassembled easier and faster, with minimal damage. It can also be assembled again, which cannot be said about drywall construction. As a rule, such a box is tiled. Therefore, the scope of these two products is different - under plastic it is best to hide old pipes, the condition of which is in doubt, and under drywall you can sew up new communications collected from modern materials.

The general technique for constructing a box is reduced to the following actions:

1. Guide profiles are fixed to the walls adjacent to the corner.

2. Then an angle is assembled, which is made of two profiles twisted together. It is important that the profile flanges are oriented to each other at an angle of 90°.

3. At the end of the construction of the frame corner element must be fastened between the wall guides on both sides.

4. The finished frame is sheathed with plastic or plasterboard.

Important! During installation plastic box it is worth considering that the last panel should not be fixed tightly. It is enough to glue it with silicone to the end wall. This will provide easy access to communications, because. it is enough to cut the glue with a knife and avoid damage to the structure.

A box for hidden wiring will allow you to hide the largest communications.

Solution #3: Plumbing Roller Shutters

Another option for masking pipelines is to use plumbing shutters. Such products have several purposes at once:

• absorb the working noise of plumbing equipment;
• mask pipes;
• improve the aesthetics in the interior;
• provide full access to communication nodes.

The use of roller shutters is enough convenient way to hide the plumbing, because with external accuracy, full access to any plumbing elements is maintained. In addition, even a boiler can be hidden behind a roller shutter.

Roller shutters in the bathroom will help create a neat and aesthetic interior.

Solution #4: Furniture

It is just as convenient to hide pipes in furniture as in a box. Communications will always be easily accessible, while outwardly not a single pipeline will be visible. However, in the case of such a disguise, it is necessary to be sure of the quality of the joints and the material of the pipes themselves, otherwise the cabinet or cabinet will be hopelessly damaged.

The use of hanging pedestals is the most modern version, which allows you to make the room impeccably neat, as well as save scarce space under the washbasin to accommodate other interior items.

Use of hanging furniture original way hide the piping.

Not less than interesting option is the installation of a false cabinet or decorative curtain to cover communications. To implement such a solution will require very little time and cost. All that is required is to choose a curtain suitable for the interior of the room and hang it on the frame of the washbasin. This option is suitable for masking pipes with a diameter of up to 50 mm, but it provides maximum ease of operation and easy access.

Hide the drain wiring under the washbasin behind the curtain - best option for shabby chic style.

Solution #5: Tile

This approach is the most popular when finishing bathrooms, since masking the piping behind the tiles does not require large investments, and a wide range of colors and patterns of tiles will make the bathroom aesthetic and original.

To hide pipes behind tiled wall must first be installed drywall partition. As a rule, it is made of waterproof material, the sheets of which are attached to metal carcass. The tile is fixed on the partition. However, the most difficult thing in the construction process of such a structure is the creation of access to cranes. Therefore, the size of the opening must be such that through it it is possible to freely get to the communication nodes. As a rule, such a hatch is comparable in size to one or two tiles.

The hatch can be completely recessed into the wall, disguised as a common tile laying. In this case, the wall looks solid. Or you can install an overhead sanitary hatch, which is made of metal and has a magnetic lock. These products are commercially available, have a low cost, and a neat appearance will not spoil general design interior.

Tile is a simple and aesthetic option for masking piping.

Conducted plumbing communications in the bathroom and toilet must be securely hidden so as not to cause damage general interior premises. To solve this problem, there are many ways, each of which has its own characteristics and allows you to choose the best option for repairing your home.

A master class on laying tiles on a box is presented below:

If you dream of turning the bathroom into a cozy place to relax and perform hygiene procedures, then you, first of all, need to mask all the pipes available there. Most optimal solution- choose plastic panels that would perfectly harmonize in color with the bathroom, and also reliably hide water and sewer pipes from prying eyes.

How can you close the pipes in the bathroom

It is realistic to close the pipes in the bathroom if you mount a plastic cabinet, or use other methods.

Consider the most common, thanks to:

• Mosaic. creative option, which has found application for drainage pipes large diameter. Masking is the process of pasting pipes with mosaics to match the color of the tiles laid out on the walls, and obtaining a stylish component of the decor.

• Roller shutters. This is another successful method of hiding pipes. Thanks to sanitary roller shutters, it is easy to decorate a room in styles for every taste: hi-tech, modern, etc. Roller shutters do not take up much space, and in case of force majeure they can be easily removed in a few seconds to look at hidden communications. When installing roller shutters, craftsmen equip them with a manual or mechanical drive.

• Stucco made of polyurethane tubes. If you are still thinking about how to close the pipes in the bathroom so that it takes on an aristocratic look, then you need to use polyurethane moldings. Thanks to this light material you can not only drape pipe products, but also give the room unique design in any style. At emergency situations This versatile decoration can be easily removed and cut with a hacksaw. Stucco made of polyurethane tubes is acceptable for pipes with a vertical arrangement.

• metal gratings. This decorative element in the form of iridescent chrome-plated gratings is perfectly combined with taps and other sanitary fittings made of the same material. Metal gratings are the perfect decoration trendy baths in high-tech style and perfectly close the water pipes in the bathroom and toilet (read also: ""). Specialists install gratings directly to the pipes or attach them to special frame from metal.

• false walls. You can effectively sew up pipes in the bathroom thanks to false walls. This camouflage component, unlike other types, can close several tubular products at the same time. Naturally, then the bathroom space will be significantly reduced, but the design will be impressive. The choice is still yours: a cozy and beautiful bathroom or the presence of bare pipes that will remind you of a basement all the time. Inconspicuous false pipes will solve several problems at once: they will give the residents comfort and good mood, and they will also perfectly sew up the plumbing in your bathroom.

Please note that by lining and closing the pipes, you will significantly reduce their noise during operation. If the measures taken do not positively solve the problem, then you should resort to special means, for example, heaters. The latter can both reduce the noise level from the buzzing of pipes, and extend the period of their operation, protecting them from moisture and deformation.

Plastic disguise

Best for baths plastic coating. Firstly, it is not subject to deformation as a result of temperature changes and high humidity, easy to wash off various pollution looks stylish and festive.

Of great importance when masking pipes is the possibility of fastening plastic panels to walls and pipes. And also very pleased with the chic assortment of plastic - imitations for wood, stucco, metal, etc., which can be safely used for a bathroom of all kinds of styles. It is not for nothing that plastic confidently takes the palm when answering the burning question: how to seal the pipes in the bathroom?

Preparation for masking pipes with plastic starts with the purchase of a tape measure, a pencil, a hacksaw with a millimeter blade, nails, self-tapping screws or a stapler, a hammer, silicone glue, plastic, bars for the frame. The latter can be made from various materials(wood, metal, etc.).

The sequence of masking pipes in the bathroom:

1. Fix the bars on the wall strictly perpendicular to the panels, according to the level.
2. Cut off with a hacksaw plastic elements for frame sheathing, strictly observing the decorative ornament.
3. Attach the panel to the frame with nails, screws or stapler staples.
4. Lubricate the connection points for strength silicone sealant that protects the joints from moisture access there.
5. Attach plastic panels.

Vertical pipe masking

The locker is perfect solution when masking pipes located vertically directly on the wall or in the niche of the bathroom.

Installation sequence:

1. Choose a cabinet according to the size.
2. Mount the frame or hinges to the wall.
3. Drill holes for pipes at the top and bottom of the cabinet.
4. Permanently install the product on a frame or hang it on hinges.

Tiles for collapsible construction

Water pipes can be covered with tile tiles. Its shape, dimensions and color must be identical to the wall cladding. And when emergency repair or a water pipe leak, the disguise could be easily disassembled. Therefore, these designs were not invented in vain and are an urgent need in force majeure circumstances.

In order to seal pipes in the bathroom in this way, it is necessary to prepare tools, materials in the form of:

• drills with pen drills;
• tile cutter or hacksaw;
• self-tapping screws;
• metal profiles;
• tiles;
• plastic corners.

The sequence of actions when masking pipes with tiles:

1. Install the frame from the profiles.
2. Cut the tile according to the dimensions of the frame.
3. Drill holes at the connection points with the frame.
4. Fasten with screws tile and supplement with plastic corners.

Wooden box and plumbing disguise

To implement this method, you will need specific tools and materials in the form:

• hammer and nails;
• hacksaws and drills;
• tape measure and pencil;
• boards (thickness from 10 to 20 mm);
• tiles and tile adhesive;
• cork from wood.

How to seal and sew up water pipes with wood

To do this, prepare three boards, calculate the distance from outer side pipe product to the wall and add 2 cm to the resulting value. This will be the width of the box. Saw off a board of this size, which we will call No. 1. The size of board No. 2 in length should correspond to the height of the room.

The size of board #3 can be obtained by attaching #2 to the pipe and calculating the length to the wall, taking into account the overlap of #2 on #3 to securely fasten both boards with nails. After that, you can make board number 3.

The following procedure for sewing pipes in the bathroom:

1. Nailing at 4 points of boards No. 2 and 3.
2. Drilling (if necessary) a hole in #2 for the hose.
3. Necessary condition when masking pipes - drilling three or four holes in the wall with a diameter of 40 mm, spaced at the same distance from each other (read also: ""). It is better to make holes a little obliquely, and also do not forget about a centimeter of indentation from the corner of the room. Drive wooden plugs into the prepared holes.
4. Drawing lines on the wall from the center of the plugs so that you can later nail them without any problems.
5. When installing the box over the toilet, it is important to shut off the water in the system, unscrew the hose, attach the cabinet to the wall surface and make the hose into the already prepared hole, and then screw it on.
6. Nailing a cabinet with nails falling into corks made of wood.
7. It is allowed to stick tiles or mosaics on the box.

Pipe coloring

The final step in masking the water supply is painting the pipes. It must be done so that no traces of rust are visible, and the result exceeds all expectations even with high level humidity.

For the procedure you need to buy:

• primer with anti-corrosion properties;
• oil paint (water-based);
• flat brush;
• gloves;
• rags;
• emery;
• putty knife;
• construction dryer.

The sequence of actions for painting pipes:

1. Thoroughly clean the surface of the pipes from the remnants of the previous paint. For this purpose, treat the surface building hair dryer or spatula, and then sand it sandpaper, remove dust after construction work.
2. Turn off the water supply.
3. Coat the tubular product with an anti-corrosion primer to prevent metal deformation in a humid room.
4. Paint carefully so as not to stain the floor.
5. First, paint hard-to-reach areas and back sides pipes without gaps and smudges, vertical - process from top to bottom. Choose the color according to the color of the walls.
6. As soon as the first coat of paint dries, apply a second one so that the painting is uniform and thorough.

Take advantage of our tips:

1. If you need to paint pipes with hot water, then it is better to purchase radiator enamel.
2. For water supply and discharge pipes the best option there will be a coating with anti-corrosion enamel, combining the qualities of an anti-corrosion primer, enamel of increased wear resistance and a rust converter.

After completing all these steps, you will finally cope with the task of masking pipes at the place where hygiene procedures are taken.