Do-it-yourself vase from a pipe from linoleum. Vase from a pipe from linoleum: floor products. Making a vase from a cardboard product

Separate interior details, namely vases, panels and others decorative elements give the interior a personality and a lively atmosphere. However, interior decoration is not always the work of hands. professional designers, who are specially trained in this art and have a natural talent - the room can be successfully decorated, guided solely by their own taste.

Although most jewelry must be made by professionals, there is also the possibility of making this process with your own hands. In this case, we cannot talk about metal or stone products - their processing is quite complicated and time-consuming, but creating simple and at the same time original jewelry from easily processed materials, everyone can do it.

For creating decorative ornaments at home, you can use not only samples purchased in specialized stores, since their price is quite significant, but also with the help of improvised means. At first glance, their appearance may not correspond to the final goal, but in skillful hands, from waste material you can create a real masterpiece of applied art.

Even such an element as a pipe from linoleum, which remains after the coating is laid, can be used as decoration after proper processing. This article will describe in detail the instructions on how to make a floor vase out of this material to decorate the interior.

Manufacturing process

When packing linoleum in rolls, a hollow pipe made of durable cardboard is added to the middle, which is most often thrown away after flooring - it will serve as the main material for the future vase. It will be possible to place dried bouquets in it, decorative branches trees and other light decorations, however, it is undesirable to use it as a carrier for planting live plants.

Frame assembly

When cutting, you will have to make great efforts and in any case it will be difficult to call the seam even - much easier pipe cut with a hacksaw for metal.

  • Using a tape measure and a simple pencil, marks are made on the pipe, which correspond to the required length of the future vase - at least four risks should be made, and a value of eight points would be ideal, since in the future it will be easier for you to combine them into one line;

Note!
A large number of marks guarantees even cut, which in turn will be the pledge flat surface vases - a skewed, uneven edge is unlikely to contribute to the good appearance of the product.

  • After the cut line is marked, you can start cutting. A hacksaw will do an excellent job of this task, leaving a smooth, correct cut without breaking off the edges, as can happen if you use an ordinary wood saw for this purpose. The cut should be carried out in a circle, gradually turning the pipe in the process of cutting - so you will not go astray;

  • Then you need to prepare the basis for the future vase- most often it has a round shape and is made of corrugated cardboard. Also, hardboard, plywood, etc. can serve as a material for it. - the only condition for the material is the presence of the necessary strength to withstand the weight of the future vase along with the contents;
  • The diameter of the base must be greater than the diameter of the pipe to ensure stability future design- and the greater its value, the more stable the vase will be. The cutting of the base is carried out depending on the material - corrugated cardboard can be cut with a clerical knife, and other materials are processed with saws of the appropriate purpose.

Note!
For reasons of style, it often happens that the base has a size slightly larger than the circumference of the pipe - “as long as it stands”, but do not forget that it is necessary to take into account the presence of a decorative element inside: branches, flowers, etc. - the more they rise above the vase, the more stable the base should be.

  • When marking out shapes such as a square, you should not have much trouble, but to cut out a perfect circle, you will have to use special device. Since it is difficult to find a compass of this size, it is necessary to find a rope whose length will correspond to the radius of the future base;
  • One end must be tied to a nail, and a pencil attached to the other- the nail is stuck into the center of the future circle, the rope is stretched and, in the taut state, the contour of the circle is outlined. Thus, you will get a perfect circle, since the rope will not let you go beyond the circle, and the same degree of tension will allow you to control the inside;
  • After both elements are cut out, you can start connecting them.. To place the pipe exactly in the middle, measure the distance from the edge of the base to its surface and move the pipe until the length of the segments on all sides is equal - this will be the correct location;

External design

floor vase can be decorated in any way - with light stucco made from flour mixed with PVA, dried citrus slices, herbarium, coffee beans, etc. The only condition for decoration is the light weight of the decor - it is undesirable to use massive metal jewelry for this purpose. As an adhesive for mounting, you can use the same PVA or epoxy compound with accelerated curing time.

Outcome

Vases from pipes from linoleum will decorate with their unusual appearance any room. They can also bring practical benefits, becoming a haven for dried bouquets and light items of everyday use.

Today, it is rare that an interior, like a landscape, does without expressive and spectacular accessories. One of them can rightfully be called a floor vase. In order for it to look stylish and harmonious in the place allotted for it, it is not at all necessary to buy a finished product. It is quite possible to do it yourself, which will be discussed in this article.


Choice of size and shape

Floor vases can be different: high, medium height and width, large and moderate in size. The parameters of a floor vase depend on a number of factors. One of the key is the design of the surrounding space. For example, the dimensions may depend on the footage of a particular room, because the smaller it is, the smaller the vase itself should be. If this fact is not taken into account, the accessory may look too bulky in the interior, thereby breaking the visual balance.

The height of the product can vary from 40 to 90 cm. It is selected, paying attention to the height of the walls and the spaciousness of the room, since it is too tall accessory can visually make the height of the walls smaller, which is unacceptable. The width is selected based on your own preferences, as well as the form available for manufacturing. In addition, it may depend on the chosen style, which should match the interior design.



The shape of the floor vase can be conventionally roundish, square, triangular. Each type has its own nuances, for example, a rounded shape is considered the most harmonious for pouring into different stylistic trends design. You can make it using bottles or even three- and five-liter glass jars. The papier-mâché technique is also suitable for this.

A square floor vase is good for modern interior arrangements. The basic form for its manufacture can be a regular cardboard box. It is somewhat more difficult to make options for a triangular shape, since it is less common to pick up such shapes. Products of this type are often made from improvised raw materials or various constituent elements(for example, newspaper tubes).



Manufacturing methods

You can make a floor vase with your own hands from waste material, improvised means, and even ordinary dishes. Masters make such accessories not only from three-liter cans and papier-mâché, but also from plumbing pipes, gypsum, twine, linoleum. To make it stand out against the background of the interior, as well as harmoniously fit into it, it is better for a beginner to choose to create a variant of a symmetrical rounded shape. At the same time, it is important to consider: the product looks better against the general background if its shade does not match the color floor covering, furniture and wall cladding.



From a three-liter jar

Such work is remarkable in that without drawing skills it allows you to get a product with imitation artistic painting. In addition to the jar, to make a vase, you will need decoupage napkins, acrylic paints, brushes, twine and special glue, as well as the necessary decorating accessories (optional). The method of manufacturing such a floor vase consists of several successive steps:

  • the surface of the jar is degreased and coated with white acrylic paint;
  • after it dries, twine (or ribbon) is wound around the neck;
  • prepare decor elements (cut out of napkins);
  • they are glued, spreading with a brush, creating a pattern, ornament or other composition;
  • after they dry, a transparent acrylic varnish is applied on top.



The decor looks beautiful in gold and bronze, and for such a creation of a vase, it is enough to use a contour gel, drawing a simple pattern with it. If you cover such a product with dark paint on top and spray gilding in places with a sponge, such a vase will look expensive.

Out of the box with a beautiful shape

Such vases look quite unusual in the interior, they are very effective, but they are suitable mainly for modern style, as well as landscape compositions. To make it, you need a box (mould), gypsum (cement), container for forming inner space and cling film to make it easier to remove the vase from the base:

  • gypsum is mixed with water until smooth, achieving the consistency of thick sour cream;
  • it is poured into the box in a small layer;
  • put a smaller container inside, setting it in the center;
  • add the mixture to the desired level;
  • when the composition is completely dry, the vase is removed from the mold;
  • processed with fine sandpaper and decorated.

If you want to give a picture to such a product, you can do this by spray paint and lace trim. The braid is tightly attached to the base, paint is sprayed over it. If you want more chic, you can add a little silver or gold by applying it with a sponge.

From a plumbing pipe

For such a product, sometimes not only the usual materials at hand are used, but even nylon stockings and knitted fabrics. The design of the future vase depends on the type of the product itself, its material and shape. Variants with kinks are more suitable for decorating the landscape and summer cottages. Straight line products cylindrical shape relevant for urban apartments.

The best material suitable for work can be called plastic and metal plumbing pipes. They can be pasted various decor(including even cereals), or you can give a relief pattern. For example, you can make a plastic trio from pipes of different heights by cutting off their top at an angle. The bottom of such vases is made of cardboard, although if desired and with the appropriate skills, it can also be welded to the metal.

A nylon stocking can be put on each pipe, forming folds. On top, the surface is impregnated with glue and wait until it is completely dry. After the base is created, they start decorating the vases, covering each of them with special spray paint.



The color is chosen based on the features color solutions specific room in which the accessory will stand. It remains to add a little gilding or even glitter - and unique decor ready.

From a paper pipe from linoleum

Such a product can be used for dry branches. It’s easy to create: you need the pipe itself (you can buy it at hardware store), twine or rope thread, some cardboard, a heat gun with glue and a saw for cutting the pipe. The manufacturing method is as follows:

  • cut off from the pipe right amount, having previously decided on the height of the vase;
  • they take thick cardboard and, putting a pipe on it, circle it, and then cut out the bottom;
  • having glued the bottom to the future vase, they are engaged in decorating it using a rope thread or twine;
  • the thread is wrapped around the vase from top to bottom, gluing to the base with hot glue (other adhesives can also be used);
  • tightly wrapping the product to the very top, cut the thread;
  • for stability, put some paper or small pebbles inside.




Made of thick cardboard and cardboard tube

To create a Greek vase, you will need old newspapers, a cardboard tube and several large boxes that you can get from the store. You will have to cut out the base of the vase from them, so it is advisable to take boxes of approximately the same size (it makes no sense to glue them). This option for making a floor vase is more laborious, but the look finished product will please not only the owners of the house: such a product will be quite a bright and memorable accent of the interior. Create such a masterpiece using the following technology:

  • correlate the height of the pipe, the desired height and the size of the available boxes (everything must be the same);
  • a vase template is cut out, workpieces are circled around it, cut out and folded in half;
  • when there are enough of them, they paste over a cardboard tube (it will look like an accordion);
  • after that, they tear the newspapers into pieces, soak them with PVA glue and create the base of the vase, pasting it from top to bottom in several layers, trying to make the shape even;
  • after the newspaper, you can stick several layers of toilet paper;
  • when it dries, the surface is covered with dark paint;
  • an ornament is drawn with contour gel or special contour paint;
  • you can cover the vase with another one on top thin layer paint, and then mark the relief pattern with bronze or gold paint.




To make the vase look expensive, you need to make it as carefully as possible, paying attention to the neck and bottom. When coating, it is important to color them too, the lines of the pattern should be even, and when ornamented, they should be identical.

Decoration of the finished product

Decorating a finished accessory will require knowledge of the basic skills of style, without which it is difficult to make it appropriate in a particular interior. Today fashion trends aimed at a combination of conciseness and functionality. The decor should be minimal, it is important that, despite the apparent simplicity, the product looks status, spectacular and professional, as if it were purchased in an expensive store. Therefore, it is necessary to approach the issue of decorating especially carefully.



Depending on the type of material used and the technique for making a floor vase, you can use:

  • mosaics, including home-made from multi-colored tiles and mirrors;
  • flat buttons of different sizes and shapes;
  • coins;
  • coarse salt;
  • cereals, sunflower and pumpkin seeds;
  • dry branches of different lengths and curvature;
  • cut branches;
  • twine;
  • tree bark;
  • newspaper tubes;
  • office rubber bands;
  • bracelets made of beads on a rubber thread;



In addition to the pipe itself, due to linoleum, other materials will be needed. Since it is made of plain paper, standard stationery glue or PVA is suitable for gluing. You can also prepare a homemade adhesive composition. To do this, pour cheap flour with water, stir everything until smooth and bring to a boil.

Various decorations and decorative elements will also come in handy. With the help of various molds, you can make patterns. Prepare acrylic paints that will last a long time and won't bleed over time.

For bright and attractive vases, you can use sequins, rhinestones, stickers and other decorations.

Of the tools you will need scissors, a pencil, a tape measure, a hacksaw and sandpaper. To process the product, you need rags, small pieces of cardboard, a little dry alabaster.

How to make a vase from a linoleum pipe

Put the pipe in vertical position. If it turns out to be too high, cut off the excess. You need to cut off the top in a straight line or obliquely, as desired.

The base must be given additional stability. This can be done in several ways. The easiest way to cut a piece of fiberboard round shape and a diameter of 15 cm larger than the pipe itself.

To glue the rack to the base, you need to use a thick filler. Soft toilet paper will help to give it the right consistency. It must be soaked together with PVA glue slightly diluted with water. final touch- add 2 tablespoons of alabaster, which will help the mass harden faster.

Mark the center of the base and put a small slide of paper-glue dough on it and put the pipe into it with force. Then smooth the pipe at the seams from the outside and from the inside. If your hands are not enough to reach the bottom, take the handle from the mop and tamp it down.

To make the design stronger in the future, take a waterproof container inside right size. A plastic pipe sealed from the lower end or a plastic and durable narrow plastic bag. Then the vase will be suitable not only for dried, but also for fresh flowers.

If everything is installed correctly, the pipe will stand firmly, but at the same time it will be easy to move.

vase decoration

The main work has been completed. You can start decorating. For this you can use the old nylon tights. Lubricate the pipe with glue and put tights on the vase. It will take about three pairs that will create originality and give a special look.

Leave the product in a draft so that everything dries well. This will take approximately 1 hour. During this time, soak pieces of paper in water, add paste and alabaster, knead the resulting mass.

To make patterns easier, sandbox molds need to be greased. vegetable oil. Then fill them with a sticky mass, carefully leveling it and compacting it. After a couple of minutes, pull out the resulting figures and, while they are still damp and flexible, attach to the vase. They must fit snugly against the curved walls of the pipe.

You can finish decorating the vase as you wish. Use sequins, rhinestones, beads. The folds that formed the tights, fill with paint. Sweep across the tops with a semi-dry brush. You can choose dry acrylic paint with a silver or golden sheen.

Paint decorative elements in different colors. Choose bright, juicy shades - sea ​​wave, forest greenery. Paint the rope that wraps around the vase with gold or silver shimmery paint.

Free places can be decorated with various figures made from papier-mâché dough. Shells, stars, flowers and other shapes that are in harmony with common style in the interior.

Design options for a vase from a pipe from under linoleum

In the process of work, you will most likely have a lot of own ideas for decorating this product and using unnecessary building materials. At the same time, it is possible to invent budget options, which will help to make the interior original and decorate the room with unusual details. Such handmade products will please the whole family.

Style and design of vases can be anything. It is important to take into account the features of the interior and create suitable details that complement it flawlessly. Choose accessories in nautical, contemporary, classical style, which will help to create an exclusive thing.

The vase can be stylized according to the tree bark. The base under the color of birch looks especially interesting. It can be decorated with leaves and papier-mache mushrooms.

You can complicate the work by making a vase under an antique amphora. To do this, you need to cut out several identical profiles of the desired shape from cardboard and glue them to the base. Then cover the structure with a cloth or tape and paint over.

The pipe can also be used as a stand for umbrellas and canes in the hallway. You can think of other useful uses for it.

To new year holidays the pipe can become one of the elements of the solemn decoration of the apartment. The pipe itself will serve as the basis-trunk for artificial christmas tree, and branches and needles can be made from other materials.

If there is a cat in the house, use it as a scratching post. To do this, coat it with glue and wrap it with a strong rope around the entire diameter.

The pipe is also suitable for flower beds on the balcony. Set the base horizontally, glue the ends, and cut off the strips along the entire length of the upper part. Cover the pipe with polyethylene, fill it with soil and plant any flowers.

Another useful and practical application is a container for storing small children's toys or other items. In this case, you can color the pipe in bright colours and paste images with cartoon characters. Such an item would look very appropriate in a child's room.

Thus, even from unnecessary material, you can create a lot of bright and interesting crafts. We'll have to spend a little time, show imagination and dial necessary materials but the result is worth all the effort. Handmade home furnishings will add personality to any room.

If you recently made repairs at home, then there is always a bunch of unnecessary garbage and our advice: do not rush to throw it into the garbage chute, in this pile you can always stumble upon objects that will be useful in inventing fakes - these can be various design details and various decorations for your home. Most often, superfluous items are left to no one the right pipes, from which you can invent a beautiful designer vase. There are several methods for reproducing our vase.

So, first consider the types of vases made of plastic pipes.

Mounting

We will decorate with the help of unnecessary nylon stockings.


But before using the stockings, we will get acquainted with the creation of the silhouette of a vase using plastic pipes. It would be great if these pipes were designed for sewerage. They fit perfectly in shape and material.

Now let's move on to the manual, which will describe the sequence of work and actions:

Composite decoration for a vase

The sequence of actions is practically no different from the first version of the creation of the invention, but there is still a slight difference and it lies in the fact that the methods of decoration are different.

Now let's move on to the very process of inventing a vase using this method:

  1. We put on the pipes, which we also prepare, as in the first version, hosiery on both sides so that a small empty gap remains in the middle of the pipe.
  2. We apply a small amount of PVA glue to this empty gap so that it is smeared over the entire area.
  3. Now we pour cereals of any type on this smeared gap, depending on your imagination.
  4. Let's wait until the glue hardens, and attach the pipe segments to each other and paint in various colors depends on your wishes.

At this stage, we finish making a vase using cereals.

Making a vase from a metal alloy pipe

In case you have an unnecessary metal pipe, whose edges are cut evenly, then it will come in handy for creating our crafts. If the pipe has an edge, then it is perfect for us because you do not need to create a stand for the vase, it will be ready right away.

Using this type of pipe, we will get acquainted with the technique of its creation through the following steps:

  1. To begin with, we will take a roll of ordinary cheap toilet paper and glue our pipe in a circle so that there are no empty gaps. Small wrinkles are allowed.
  2. Now we need black paint, and with it we paint the pipe in two layers, to give it a natural look.
  3. Next, take the powder with the effect of the powder and apply it with gentle movements over the black paint.
  4. For special beauty, you can decorate a vase with beads or beads.
  5. With the help of mounting foam, we create the bottom of our product. We make it this way: we put the craft on a plastic stand and we put the stream of foam in a vertical position. After waiting until the foam dries, it is allowed to paint the bottom with spray paint of any color.

Take note! the edge of our beautiful vase we can embellish with welding device by welding them a little. The result is beautiful metallic lace.

I hope you understand that you won’t be able to place fresh flowers in this type of vase the way they require water, and you won’t be able to pour it into such a craft, but don’t worry, it’s perfect for placing dry or inanimate flowers in it various sorts. In it, they will look aesthetically pleasing and tasteful.

Making a vase from a cardboard product


If during the repair you ordered the right amount of linoleum to your home, then we note that a cardboard tube is placed inside each such roll so that it does not wrinkle and disperse. But for the end result,

you just need to show a little of your imagination.

Often, after repair, there are pieces of materials, coatings, for example, the remains of linoleum, pipes. They can be used to create a unique decor for decorating a room. For example, a flower vase can be made using not quite conventional materials. Used pipe, linoleum, carton boxes, profile or plastic residues. With their help, it is easy to create a unique craft and decorate your home, using simple, improvised means. An unusual designer vase can be made in a short amount of time without any financial outlay.

A vase for which a pipe is used: a master class

How to make vases from pipes? The master class will tell you how to make a floor vase with your own hands from a pipe. The floor vase will be more durable if not thin plastic pipes are used, but a thick pipe, which is usually used to install sewer systems.

You can decorate such a product with your own hands by using old nylon stockings or a cut off part of tights. In the event that the pipe is half a meter long, it must be cut into several identical pieces. The ends of these parts are cut along an oblique line (photo), inserted into each other. After that, a stocking is taken, well soaked in PVA glue, squeezed out. Next, the stocking must be put on the pipe. Let the floor vase dry.

The bottom can be made using cardboard or plastic materials, as well as linoleum, a part of plastic or cardboard is cut out, glued with superglue to the base of the product. The initial design is ready (photo).

The next stage of decoration will require imagination and creativity. A do-it-yourself vase from a pipe can be painted in a variety of colors and shades. A do-it-yourself floor vase, decorated with rhinestones, large and small beads, beads, looks very attractive (video).

Vase from a pipe from linoleum: a master class

How to make a vase using linoleum? In order to make such a craft, you need a piece of unnecessary linoleum. Linoleum is twisted, fixed with adhesive tape. The bottom can also be made using linoleum or cardboard pieces. Pick up, cut, glue or fix in any convenient way.

After that, the floor vase is covered on top with a piece of stocking, pieces of wallpaper cut to size or corrugated paper. Further, it is decorated to your taste and discretion. Do-it-yourself floor vase, for which linoleum became the basis, can be decorated with sea or river shells, beads different sizes, sequins, beads. It only requires the embodiment of fantasy. The result will be an unusual floor vase made of linoleum pipes, and making it is not difficult at all.

Metal pipe vase: master class

How to make a unique vase from metal pieces? If there are profiled metal pieces left, they need to be cut exactly along the edge. This pipe will form the basis for a durable product. take toilet paper or paper towels, the pipe is glued over the entire diameter, no empty spaces should be visible. You can create small folds in parallel. Next, dark paint is required, the pipe is painted with it. The paint is applied in two layers, the second layer is applied after the previous one has dried.

Instead of black paint, you can take dark blue, deep turquoise, blue, or purple. But in this case, you need to make more layers for full staining. Each layer will saturate the previous one. It is important that the metal pipe is not visible behind the layers of paint.

Further, the floor vase is decorated with beads, beads, beautiful buttons. The bottom of the vase can be made interesting way- mounting foam and profile pieces or a single piece are taken metal base. The floor vase is placed on a stand, the gap between the bottom and the product is sealed with mounting foam. When the foam dries well, you can decorate the product. Often, paint from a spray can is used for this - this is how a PVC craft will be beautiful and unusual, it will decorate any room. In addition, PVC makes the product durable. Due to the fact that the bottom is fixed with polyurethane foam, you can not be afraid of damage during transportation.

How to create a beautiful vase from a cardboard tube

If there is a dense cardboard tube, it can also be made beautiful product which will be the highlight of the room. You will need such materials and tools: glue (any, but it is better to take PVA), masking tape (it is used to connect cardboard pieces to each other, and also to hide the joints of pipe pieces). For decor, you can use any type of fabric. In addition, you will need paint - bronze or gold (but in general this is optional, depending on the previously invented option).

You will also need materials to further decorate the vase. A cardboard pipe can be decorated with small or large beads, different sizes and colors of beads, beautiful buttons, sequins. Cardboard tube is cut into three equal parts (work is performed similarly plastic pipe). Further, with the help of a wire or by gluing with glue, the pieces are connected. After that, the cardboard base is impregnated with glue, wrapped on top masking tape. Then you need to wait for the complete drying of the finished product. This will take days.

After a day, you can start decorating the dried product. From above, you can fit the pipe with a pre-selected fabric. Measure a piece of fabric to the size of the pipe, soak the fabric with glue, and then wrap the vase, creating light folds. Then again you need to wait until the vase is completely dry. After that, you can proceed to staining with golden or bronze paint. In addition to the usual acrylic paints, you can use paint in a spray can. When the bronze layer of paint dries, a layer of golden paint is applied on top.

Thanks to such techniques, the product will shimmer and sparkle beautifully. At the end, you can add a couple of beads, buttons, and other decor details.

Fitting © 2022 Design and interior of apartments