The best types of glue for repairing rubber boats. Glue for pvc boats (secrets of choice from the pros). What glue can be used

Often we are faced with the questions "How to glue a cut on a boat balloon?", "What kind of glue to glue a pvc boat?", "Which glue is suitable for pvc?". If during the Soviet stagnation the choice of glue in general, and for pvc in particular, was limited (although then pvc boats were, to put it mildly, poorly distributed in our country), now from glue in the nearest stores in literally eyes run up (and if you also smell it). So today let's talk about adhesives for our favorite and reliable boats.

Many advise taking a two-component adhesive for gluing pvc materials. And be sure to glue on the "hot". Otherwise, in the bright sun, the glue will soften and your seams will safely disperse, which is fraught with not very pleasant consequences.

How and how to glue pvc and boats from it in particular

First clean and degrease the bonding surfaces. Then apply the first layer and leave it for 10 minutes. You can check the readiness simply by touching the edges, if it does not stick to your fingers, apply the second layer.
Keep the second layer longer, 15-20 minutes (the exposure time directly depends on the type of glue, so we advise you to experiment on small pieces of material). Connect the surfaces and heat with a hair dryer, you can even use a household one. Carefully roll the heated place, you can use a bearing for rolling big size, it is heavy and even. If you are gluing a long strip, we recommend that you start gluing from the center and spread out along the edges.

As for the two-component adhesive, this is not an indisputable truth. Polyurethane showed itself very well in practice glue UR-600 "Rogneda". Capacity in 750 ml. you can buy around 300 rubles. This capacity will last you a long time. The mechanism of its application is the same as described above.

Polyurethane also proved to be good glue Moment Crystal. A large tube will cost you only 100 rubles. They tested it on two pvc pieces. Glued, warming up with a hairdryer. So it was not possible to tear off the strips from each other. The material itself begins to tear, and the glued layer is held tightly. And once again I will repeat. Find a large bearing. Rolling them is easy and convenient.

Some advise to glue glue uranium. Tried. We didn't like him very much. On a cloudy day or cold weather everything is fine, you can't tear it off. As soon as a good sun appears and warms up the cylinders of the boat, it is clear that the glue "floats". The cylinders themselves were not glued, they tried on attachments. In general, I would not recommend this glue for gluing cylinders of an inflatable boat.

You can make glue for your pvc boat yourself. Here's another one for you good recipe. Used as a basis Super-NN glue. As heat stabilizer Mobihel 2K 9900. This is a component car paints. Here we have already got a two-component glue. For 100 ml. glue 2 ml. Mobihela. All this is thoroughly mixed and then mixed 1: 1 with acetone. We glue honey mushrooms only "hot". As a hardener, you can also use such a thing as " Izur-021". The hardener just the same gives heat resistance to the glue. And acetone is needed so that the adhesive mass is thinner and it is better to apply it to the surface.

There are still not well advertised pvc glue Locatite Super Fast Ultra Gel. In advertising they say in 5 minutes everything will be glued and you can launch the boat into the water. Holds a breaking force of 200 kg. Haven't tried it, maybe true, maybe not. Try it and write to us. Or maybe there are those who have already tried. Share information.

There is also this glue: Glue "SECOND" for soft Plastics , in containers of 15 ml. Such little tubes. No experience in using it either.

It is strictly forbidden to glue pvc inflatable boats with household adhesives, such as Moment, Superglue, etc., because. they do not have the necessary elasticity, are NOT resistant to tremo and may not tolerate contact with water.

But interesting video compared different types and brands of glue for pvc boats.

PVC, or polyvinyl chloride, is a material that is used today in many areas of construction and installation. The pipes of our water supply and sewerage systems are made from it, facade structures, floor and ceiling panels and much more. To connect all these materials, high-quality and reliable glue is needed.

Glue for PVC is different. But the main thing in his technical specifications- It is highly elastic and waterproof. After all, he often has to come into contact with parts that are under the influence of moisture, or even completely under water. In addition, high-quality glue for other materials must be resistant to sunlight, temperature extremes and mechanical stress.

Where is PVC adhesive used?

Often PVC adhesive is used for sealing work, to fill cracks and seams. The quality of this product is significantly superior to the usual silicone sealant. Even after a few years, it will not darken or turn yellow, crack or crumble. In a word, it will remain as elastic and perfectly smooth as in the first days after application.

Adhesive ideal for bonding various plastic structures. It is used on professional production, for quick connection rigid PVC parts method In addition, the product has proven itself in everyday life. Specialists of window production especially appreciated it: after all, PVC glue is ideal for attaching ebbs, slopes, blinds and other elements of modern plastic windows.

Other applications for highly flexible PVC adhesive include the plumbing industry (connecting plumbing and sanitary pipe runs, gluing rainwater gutters) and some other modern designs that we see in front of us every day (for example, billboards).

PVC adhesive: application

Experts recommend that before proceeding with the connection of PVC parts, thoroughly clean their surface from mechanical pollution, degrease it and dry it well. For additional adhesion (to improve the adhesion of the adhesive to the surface), it can be sanded with abrasive paper.

Directly in the gluing technique itself, there is nothing complicated. PVC adhesive extruded thin layer on one of the working surfaces, they are connected and pressed down for 2-3 minutes. For large surfaces, this time should be increased. The amount of glue during application should not exceed the allowable, otherwise its excess will flow out of the seam, which will reduce the aesthetics of gluing, and on some materials it can even lead to damage.

PVC Adhesive: Post-Processing and Precautions

All other transactions with working surface should be carried out no earlier than one day after applying PVC adhesive. For several days, the place of gluing is recommended to be protected from direct sun rays and high temperatures. All work with glue must be carried out in well-ventilated areas and using

An essential piece of equipment for any angler or hunter. But in life there are various situations and breakdowns of a swimming facility are no exception. Here the question arises, how to glue and what kind of glue to glue the boat from pvc is better in general, this is especially important in field conditions. Although polyvinyl chloride (PVC) is a material that does not require special care, elastic and at the same time elastic, requires a special kind of adhesive composition.

PVC Adhesive Requirements

The quality of the repair of punctures or cuts must meet the most high requirements. Otherwise, you risk getting into an extremely dangerous situation on the water while operating the boat. Such a risk is often associated with human life, because due to improperly selected glue, when the damage is repaired, the patch can come off and the boat will sharply and quickly begin to deflate or take on water. In this regard, the adhesive composition must meet the following requirements:

Types of glue

To eliminate punctures or cuts in PVC boats, you should purchase a special glue for PVC. They are divided into two main types:

One-component. The leader, according to the reviews of consumers and masters of specialized services, is polychloroprene glue. It is specially made for the repair of PVC, rubberized fabric and various materials, wetsuits. This composition has high elasticity, resilience, strength, withstands temperature extremes, and the adhesive seam has a high durability. As a substitute for this composition, you can use a special polyurethane boat glue. It has almost the same characteristics and properties, moreover, it is transparent and does not turn yellow.
Two-component. Among the compositions of this variety high performance showed glue Bostik Vinycol 1520. It is made on the basis of polyurethane, which contains wax and an organic solvent. Bostik Vinicol has high adhesive properties: strength, "flexibility", not susceptible to temperature.

Adhesives that are similar or similar in composition to Moment glue are not recommended for use when repairing PVC boats. They do not have sufficient tightness, operational durability, reliability and strength. In a situation where you have to re-repair the same place, dried Moment-type glue will be extremely difficult to remove. In some cases, it will be necessary to apply another adhesive over the old one, and the quality of such a repair is very low.

Attention! Many owners of inflatable boats choose Uran glue. Its main disadvantage is that if direct sunlight or high temperature other origin, it is prone to softening and the patch may peel off.

Adhesive specifications

To repair boats made of PVC, you need to use an adhesive composition that is designed for PVC products. In addition, it must have the following characteristics:

Moisture resistant. Since the operation of the product is carried out on the body of water or repairs can be carried out when high humidity, the adhesive must withstand the effects of water on it.
Elasticity. When inflating the pontoons of the boat, the material experiences a high surface tension. Therefore, the adhesive composition must have high elasticity in order to avoid the destruction of the seam.
Thermal resistance. During operation, the boat may be exposed to heat from the sun or other source, in connection with this, the adhesive must not soften under the influence of high temperatures.
Strength. Should have high strength when stretched.
Durability. The glue joint should not lose its strength characteristics after long period operation.
Drying time. The short curing time is an advantage of the adhesive composition. This feature is especially important when repairing in field conditions.

When gluing a patch on a rubber boat, choose special adhesives that are designed for PVC products. But when working with such substances, it must be remembered that they are flammable and emit harmful substances for human health. In this regard, all work must be carried out in a well-ventilated room or on the street.

PVC inflatable boat repair - video

Coatings, a small section of it is removed, exposing the fabric. As a rule, such damage does not threaten anything on initial stages but the sooner you fix them, the better.

2. Small cuts or, up to 5 centimeters. Can be easily eliminated at home or even camping. All you need is a repair kit and a little time.

3. More significant holes, from 5 to 15 cm. They are also eliminated on their own, but it is already more difficult to do this. Especially if there are no skills.

4. Holes over 15 cm. Theoretically, it is possible to repair houses, but it would be better if a specialist does this.

II. Choice of glue. What kind of glue is better to glue a pvc boat

The best glue for pvc boat- the glue that comes in the repair kit. It is designed specifically for PVC boats and should not give unpleasant surprises. Usually it is "Uranus" or "Desmacol". True, "Uranus" tends to soften when heated, and then the patch can peel off.

If you have to choose glue separately, then you should purchase only one that is designed specifically for PVC.

There are two types of glue that you need to pay attention to first:

Characteristics

Type of: Glue
Works: Outdoor, Indoor
Application area: Universal, For wood, For furniture, For windows, For floor
Manufacturer country: Russia
Package: Box

Description

Adhesive for boats and other PVC products suitable for both professional and self repair. The glue line is transparent. The connection is resistant to water, oil and gasoline. Suitable for bonding various combinations soft and hard PVC, rubber, leather, metal, fabric,...

Polychloroprene glue

– one-component a compound that is designed to bond inflatable boats, wetsuits and rubberized materials. Not particularly suitable for PVC, but without fish, as they say ...

Water resistant
Elastic
High strength
・Hangs on quickly
Provides seam durability
Durable
Heat resistant

polyurethane glue

for boats, PVC has the same qualities as polychloroprene, differs only in transparency and in that it does not turn yellow. Designed specifically for PVC boats and this is its significant advantage over other adhesives.

It is not necessary to use Moment and similar adhesives when repairing their PVC boat, despite the fact that many advise using them. The tightness and strength of such an adhesive in this situation is doubtful. And also durability. But to clean it off from the place of gluing in order to apply a new adhesive composition will be more than problematic. Most likely you will have to stick on it, and this reduces the quality of the patch.

Two-component adhesive for pvc boats Bostik Vinycol 1520 (Bostik Vinycol 1520) is based on polyurethane (with the addition of wax) in an organic solvent.

This PVC can be applied with a brush and dries quickly.
Vulcanized glue Bostik for PVC boats has a high resistance to water and humidity. It is just designed for the production of inflatable boats.

III. Damage repair

In fact, all types of damage to PVC boats are eliminated using the same method, with only a slight difference.

Step 1. Stripping

We clean the place of gluing from dirt. Some advise using fine sandpaper for cleaning, but this can only harm the surface. Sandpaper erases the coating of the boat in the same way as everything else, and this is not exactly what will increase. So without special need, you should not resort to this cardinal method, except that the pollution is very firmly rooted and there is no other way to get rid of them.

Step 2. Degreasing

For perfect and durable bonding, the surface must be degreased. The ideal remedy a solvent will serve for this, you can also use acetone. If there is neither one nor the other, then alcohol will do, but this is only as a last resort. When degreasing the boat, you need to be careful and not overdo it - solvents, although tight, corrode the surface of the boat. Therefore, everything should be in moderation.

Step 3. Preparation

· Cut out the payment. It should be a couple of centimeters larger than the hole.

We apply it to the damage and outline the contours with a pencil.

Lubricate the patch itself and the place of gluing on the boat with glue.

Let the glue dry for 10 minutes.

· Then again apply a layer of glue on the patch and the surface of the boat.

· Wait a few minutes. The glue should dry a little, but grab.

Step 4 Gluing

With the help of a hair dryer, heat both surfaces smeared with glue. You need to do this quickly so that the surface warms up, but the glue does not dry.

We apply the patch to the surface, making sure that it lies strictly along its outlines drawn and smeared with glue, and also that there is no air between the surfaces to be glued.

standard: 1 PC.
country of manufacture: Russia
unpacked weight: 20 g
material: PVC
color: green
manufacturer's article: 0058050
discount system code:

Description

Liquid patch has a number of advantages, which allows you to repair a defect pvc material the highest quality and reliability. Penetrating into the outer layer of the repaired surface, it creates the strongest connection, increasing the strength of the connection. Unlike various adhesives, it is the original PVC, which...

One of the main components of the equipment of a modern angler is considered to be a reliable swimming facility, in particular a boat made of polyvinyl chloride (PVC). It is quite convenient, practical, resistant to ultraviolet rays, aggressive substances and does not create additional difficulties during transportation, when proper care and timely repair, the product can last more than a dozen years.

No matter how carefully the owner treats his watercraft, breakdowns and various damage to the vessel often occur. And here the problem arises, which adhesive to choose and how to properly patch. To deal with this issue, it is recommended to familiarize yourself with the types of glue and the features of their application.

Choosing the Best Adhesive

From well-conducted repair work on an inflatable watercraft depends not only on the comfort of passengers, but, most importantly, their safety on the water. With the wrong approach, the patch may depressurize, the boat will begin to release air or fill with water, which will lead to negative consequences.

A quality adhesive must meet the following requirements:

Types of glue used, features, advantages and disadvantages

Based on numerous observations of experienced anglers, the following types of adhesives have proven themselves well:

Ideal for bonding most types of rubber, in particular for repairing PVC products. Advantages: high degree of resistance to water, atmospheric changes, forms a reliable elastic seam.

From German manufacturer, made on the basis of Desmocoll rubbers, is positioned as a professional universal and waterproof product. "Master" is designed for gluing products made of leather, plexiglass, rubber, PVC, paper, cardboard, fibrous fabrics.

"UR - mono" from the category of one-component formulations, used without additional hardeners, different a high degree water resistance, good resistance to impact ultraviolet rays, low toxicity. Most often, it is used for PVC repair- coatings.

Vinicol - 1520 from a series of polyurethane compounds, the main purpose is to bond surfaces made of synthetic materials, including PVC boats. The tool has a fairly high resistance to hydrolysis.

"From polyvinyl chloride 900I"- polyurethane adhesive, its scope is extensive: balls, plastic awnings, air mattress, swimming pools, rubber soles, PVC fabrics. The composition has good resistance to various oils, gasoline, water and acids.

"Penosil Fix Go" positioned as cold welding, based on two epoxy substances. Advantages: instantly hardens, does not cause difficulties in processing, ideally suited as emergency assistance at PVC bonding- surfaces. "Penosil Fix Go" has a very strong binding ability.

It is very popular among consumers, positive qualities adhesives include: super strength, reusable, able to withstand loads up to 250 kg / cm2, firmly glues dissimilar surfaces.

The choice of glue, which is better to use

In order to qualitatively eliminate various damages on the surface of a floating craft made of PVC material, it is recommended to use glue 4508. The presence of natural components (rubber and resin) allows you to achieve the necessary elasticity of the seam and protect the gluing site from the negative effects of moisture.

The use of rubber adhesive and polyurethane adhesive also gives nice results, most importantly, comply with all requirements for the use of this composition.

How to increase the catch of fish?

For 7 years of active passion for fishing, I have found dozens of ways to improve the bite. Here are the most effective ones:

Biting activator. This pheromone supplement is the strongest lure for fish in cold and warm water. .
Raise gear sensitivity. Read the appropriate manuals for the particular type of tackle.
Lures based pheromones.

Application of glue

Before proceeding with the repair work of the swimming facility, it is necessary to carefully prepare the surface:

a damaged inflatable boat must be deflated;
wash and dry the problem area well;
in order to avoid the formation of subsequent folds in the working area, it is recommended to place a flat board under it and level the fabric sheath;
degrease the problem area with any solvent, acetone.

On this preparatory work are running out.

What repair materials will be required

After a thorough inspection of the PVC inflatable boat, and having identified the problem area, we proceed to the preparation of the appropriate accessories for repair:

repair kit, it is laid down by the manufacturer and is included in the package for the boat;
construction knife, scissors;
roller or metal plate;
pencil, marker;
small brush;
water, soap, rags;
any solvent, the use of alcohol is allowed;
special glue for rubber products.

The above list of tools will be required when carrying out repair work at home or on the shore of a reservoir. If damage needs to be repaired directly on fishing, then it is more efficient to use a repair kit and a lighter.

The standard repair kit includes materials that allow in field conditions for a short time eliminate the cause of depressurization of the ship. The set consists of a tube of special glue, a set of PVC fabrics with a diameter of 40 mm and 80 mm (6 pieces).

Lubricate the inside of the patch and the bonding point on the boat with a special adhesive

Instructions for use

The problem area must be cleaned of various contaminants. Usage sandpaper it is inappropriate here, there is a high probability of tissue damage. This option is more suitable for heavily ingrained dirt.
Degrease the working surface with either a solvent or acetone. The main thing is to observe the measure in everything, otherwise the rubber fabric may corrode.
Based on the size of the defect, a patch of the desired configuration is cut out. In size, it should exceed the actual size of the hole by several centimeters. The cut patch is applied to damaged area and outline with a pencil.
Lubricate the inside of the patch and the bonding point on the boat with a special adhesive. Allow the glue to dry a little (10 minutes) and apply a layer of glue to the work surfaces again. Hold for a couple of minutes.
Surface bonding. With the help of a hair dryer, it is necessary to slightly heat the problem area and apply the prepared patch to it. The main condition is to check the area for the presence of an air gap. In order for the glued place to “grab” better, it must be rolled well with a roller. It is better to operate the repaired water craft in 2-3 days.

For minor damage (scratches) it will be enough to fill them with glue, but it is better to apply a patch.

To eliminate holes with a diameter of more than 5 cm, it is recommended to use two patches: and with inside, and from the outside. The internal patch should be glued first, and after the second.

Storage

It is recommended to store adhesives in a tightly closed package, a tube at a temperature of +15 - +25 degrees. The storage place must be dry, protected from fire, freezing. Use, store and transport the adhesive when low temperatures does not follow, its working qualities are lost.

PVC boat repair glue should be High Quality and special purpose.
The use of cheaper options does not guarantee the reliability of the seam.
When carrying out repair work to eliminate various damages on the boat, it is recommended to follow the clear instructions described above.

Categories

Popular