Answers to questions about stretch ceilings.

What is the difference between imported stretch ceilings and Russian ones?

Answer: First of all, the width of the canvas. Width domestic material is 1.4-1.5 m., while imported canvases can reach a width of up to 5 m., thus, almost any room can be made without a weld.

The thickness of the material in domestic stretch ceilings is somewhat larger, so they are more prone to sagging over time. If, nevertheless, it doesn’t matter to you the presence or absence of welds on the ceiling (by the way, these seams are made by a special machine in production, which is called a HDTV machine), then you can safely install a ceiling from domestic material.

Is there a lot of dirt and dust when installing stretch ceilings? Our room is fully habitable and furnished.

Answer: There is no more dirt and dust when installing stretch ceilings than when trying to hang a couple of paintings in a room. All our installation teams install stretch ceilings using a professional vacuum cleaner, which significantly reduces dust formation. Therefore, you can safely order the installation of stretch ceilings in already living rooms.

Is it possible to install a stretch ceiling if the room has a built-in wardrobe?

Answer: Yes, it is possible, there are several methods of fastening. To select the optimal one, it is necessary to call our technologist so that he determines the most suitable one on the spot. suitable option.

Are the welds on the stretch ceiling very noticeable?

Answer: It is difficult to unequivocally answer this question, rather, it is necessary to say that the presence of welds is important for someone, but not for someone. Indeed, when wallpapering, there are also seams (joints) ... Welded seams are made by a special machine - a HDTV machine, so they turn out to be even and neat. The fabrics of stretch ceilings are butt welded at the factory (as when wallpapering), so they are not very noticeable. Plus, the correct location of the seams in your room plays a role, usually they are placed parallel to the window so that they are less noticeable. Correct location seams you can tell our technologist when measuring. We also provide a 10-year warranty on welded seams.

How much to lower the stretch ceiling relative to our existing one?

Answer: Based on the installation technology of stretch ceilings (under standard conditions), the guides along the perimeter (baguette) are fixed according to the level. Therefore, to say exactly to the millimeter how much to lower stretch ceiling very difficult, because Your main ceiling may not be level (not level). In this case, the stretch ceiling on one side of the room can drop by 3 cm, and on the other - by all 7! On average, based on experience, we can say - a stretch ceiling with central lighting(chandelier) drops by 3-5 cm, with spot lighting (lamps) - by 5-7 cm.

What is the maximum width of a seamless stretch ceiling?

Answer: At the moment, the maximum width is around 5.5 meters.

We want to make photo printing on a stretch ceiling, namely, a “socket” under a chandelier. Is it possible?

Answer: Oh sure! In our organization you can order photo printing on any stretch ceiling texture. Photo printing can be both on the entire canvas and on the areas of the ceiling you have chosen.

How long does it take on average to install a stretch ceiling?

Answer: Standard ceiling in a room up to 30 sq.m. On average, it is installed in 3-4 hours. The duration of work depends on the complexity of the ceiling, the selected lighting, the number of corners, pipes and others. additional work.

Do you make multi-level stretch ceilings?

Answer: Oh sure! Our rich experience in the installation of stretch ceilings allows us to install ceilings of almost any shape and complexity!

What will happen to the installed ceiling if the neighbors flood us?

Answer: Stretch ceilings made of special PVC are very durable and elastic, which allows them to withstand loads of up to 100 liters of water per 1 sq.m. square! If you are flooded by neighbors, then the water in the stretch ceiling will collect in one place (bubble), after which you just need to dismantle a small piece of the canvas, drain the water, put it back and your ceiling will once again delight you with its original view. At the same time, which is very important, your interior, walls, floor coverings will not be affected by water! Thus, the stretch ceiling will keep your repair intact and safe!

We want to install a stretch ceiling in the bathroom. Is it possible?

Answer: Oh sure! There are no restrictions on the installation of stretch ceilings in bathrooms. Moreover, stretch ceilings are also installed in pools where the humidity is no less! Fabrics of stretch ceilings do not condense moisture on themselves.

What mounting system do you use for installation?

Answer: We use only high-quality, harpoon mounting system. The harpoon mounting system is the most reliable system fastening the canvas to the baguette. The harpoon is welded to the canvas at our production using special machines, which makes the harpoon fastening strong and reliable. At the same time, it is worth noting that with a harpoon installation system, you can easily dismantle the ceiling if necessary (replacement of heating pipes, replacement of electrical wiring, etc.) and so it is easy to return the canvas to its place. The harpoon system also withstands a large number of water, in case of flooding from above.

When is it better to glue wallpaper (before or after installing a stretch ceiling)?

Answer: As you prefer! All of our installation teams install using vacuum cleaners, so there will be a minimum amount of dust and dirt during installation! But, if you have wallpaper “for painting”, then it is better to apply the last coat of paint after installing the stretch ceiling.

I heard that stretch ceilings are harmful. Is it so?

Answer: All ceilings installed by our organization have valid certificates. We do not install any kind of ceilings, it is not clear where and by whom they were made. Therefore, feel free to install them! Speaking in general, the stretch fabric is safer than linoleum, plastic windows, non-woven wallpaper and other household plastic!

We do not want to install PVC ceilings. What can you suggest in our case?

Answer: In your case, we can offer the installation of fabric ceilings. Such well-known European manufacturers as CLIPSO or DESCOR.

What are the lead times for orders in your organization?

Answer: The deadlines for fulfilling orders are "floating", they depend on the season, the workload of the installation teams and the complexity of the objects being performed. On average, after signing the contract - a week or two. If you need to install the ceiling faster, then this is discussed!

Do you have an official organization? Do you provide a contract, a guarantee?

Answer: Oh sure! Our organization provides a contract, an acceptance certificate (after the completion of the object), if necessary, certificates and a receipt. Our organization gives a 10-year guarantee for stretch ceilings, which is also reflected in the contract.

We ordered stretch ceilings from other people, after which, having done everything “somehow” and half of them disappeared. Can you finish the object?

Answer: Often, behind such "unfortunate ceiling" it is easier to do everything anew and professionally than to finish it. Therefore, I'm sorry, but only the installation of "anew"

Do you do ceilings on credit?

Answer: Yes, we do. More precisely, not "on credit", but by installments, without the participation of third parties and banks. Our organization simply provides you with a payment by installments for 3 months, without charging additional fees and interest. All this is indicated in the "Installment payment" agreement and signed by you and us. Installment periods may be extended.

Do I need to remove furniture from the room before installing a stretch ceiling?

Answer: In most cases, it's not necessary. But exactly what exactly can interfere with the installation process, our technologist will tell you when measuring.

Does the room get very hot when installing stretch ceilings? It is not possible to remove the entire furniture.

Answer: When installing the ceiling with a heat gun, not the whole room is heated, but the canvas of the stretch ceiling so that it becomes elastic. The approximate temperature of the canvas reaches 60-65 degrees. At the same time, naturally, the room itself heats up, but its temperature rises to 40-45 degrees, which is not dangerous for furniture. It is better to transfer small valuable items and indoor flowers to neighboring rooms for the time of installation, and cover large ones with a rag on top.

We want to install a ceiling cornice for curtains. Is it possible?

Answer: No problem! Just buy the ceiling cornice you like and our installers will install it by making special mounting racks that are installed under the stretch ceiling and they will not be visible.

What chandelier can be hung on a stretch ceiling?

Answer: Almost any. You can ceiling, you can hook, you can on cables.

The only limitation is the distance from the chandelier lamps to the stretch ceiling canvas. This distance must be at least 15 cm.

Is it possible to wash or wipe the stretch ceiling?

Answer: Yes, you can. Any cleaning products that do not contain solvents. Also in our organization you can purchase a special cleaning agent.

Where can I see and choose a picture for photo printing?

Answer: You can choose an image for photo printing on the website: www.shutterstock.com

There are a lot of them - choose your favorite!

We have an attic in our house, is it possible in this case to stretch the stretch ceiling at an angle?

Answer: No problem! Stretch ceilings can even fit walls (vertically directed surfaces)

Is it possible to change the fabric of the stretch ceiling in the future?

Answer: Yes, you can. In this case, the baguette will remain in place, and just the canvas will change, which will significantly reduce the cost.

Removing the stretch ceiling serious job which is easier to entrust to experienced professionals. How to remove a stretch ceiling? This can be done with your own hands, but it is best to get an assistant. The selection of tools depends on which canvas and how it is fixed on the ceiling.

You will need the following tools for dismantling:

• Stepladder or table.
• A narrow plastering trowel with sharp corners. The surface is wrapped with reinforced tape, which will avoid the risk of damaging the canvas.
• Pliers.
• Monter's knife.
• Large clothespins with which you can then hang the film. They are sold at hardware stores.
• Heat gun with appropriate wiring.

When de installation work ah take into account the design of the baguette and film.

Dismantling PVC ceilings

We free the room from everything superfluous: access to the repair site is required. Metal-plastic windows protect with a cloth from rising temperatures in the room. Using a heat gun will help warm up the room.

1. With a harpoon fastening system, it is important to start removing the canvas from the corners. Extracting decorative elements, with pliers gently pull the canvas by the harpoon. When part of the canvas is released, we continue to work with gloved hands: you need to remove the film from the corners to the center.
2. The glazing bead system provides for the start of dismantling work, similar to the harpoon system. With a spatula or hands, gently bend aluminum profile, the bead is released. Then the glazing bead is removed with a hacksaw, for fear of damaging the canvas and deforming the baguette. The installation of the canvas is carried out in the reverse order.
3. The wedge fastening system involves removing the insert and bending the profile: work is carried out from the corner to the middle. The results of dismantling and assembly depend here on the level of skill, as well as on the presence of an allowance left during installation. For installation, you will need to stretch the web: it is better to immediately take into account the allowance: if the stretch of the web is too strong, you can move the holes for communications.

If necessary, you can find step by step photos on the topic of dismantling stretch ceiling coverings.

How to remove fabric-based stretch ceilings

There is no need to provide high temperatures during dismantling. If the fastening system is wedge or glazing bead, the ceilings are removed in the same way as PVC. But the sequence of work is different - from the middle to the corners of the room. The more careful and accurate the actions, the better the result will be.

Restretching fabric webs will only be successful when there are a few extra centimeters of fabric. If the ceiling is cut into a butt, it is difficult to re-stretch it perfectly.

Clip-on baguettes make it difficult to dismantle: such fasteners cannot be removed with subsequent installation, therefore fabric ceiling needs to be completely changed.

In the process of dismantling and stretching, the canvas warms up. Even if there are irregularities, after warming up with a heat gun, they are easy to level. Film must not be air-blasted close range to avoid deformation.

Any stretch ceiling can be easily removed by yourself: the main thing is to be careful and consistent when working.

If the room has a stretch ceiling, how to remove it and not damage it? This question is asked by many owners of premises interested in the preservation of the material, as they simply lay additional communications under the ceiling, repair wiring and fix other problems that require the dismantling of the structure.

The history of the appearance of a stretch ceiling

The history of stretch ceilings is rooted in Ancient Rome. At that time, fabric was used for drapery, the color of which was carefully selected, as it had to match the shade of the wall. A significant disadvantage was that the service life of such material was very low.

The second allusion to the stretch ceiling in a later historical period is the use of calico soaked in chalk in Armenia in the 17th century. This material stretched over the frame, so the result was a perfectly flat ceiling.

The modern stretch ceiling appeared 30 years ago in France.

What is a stretch ceiling

Stretch ceiling is Smooth surface obtained by stretching a special PVC film. Polyester fabric is also often used as a fabric. AT modern designs often use the first option.

Stretching thin film or fabric is produced on special frame(baguette), the place of attachment of which is the base ceiling. The result is a perfectly flat and uniform surface, similar to a solid ceiling.

Advantages of a stretch ceiling

It has many advantages over other finishing materials:

1. PVC film is the most in a simple way obtaining a perfectly flat surface.
2. Mounting technology is considered the simplest and fastest. First, a special frame is installed on the wall, and then a film is stretched over it, heated with a heat gun. The duration of such installation takes no more than 4 hours. In addition, before starting installation work, there is no need to take out all the furniture. It is enough just to move it to the center, thereby freeing access to the walls.
3. Stretch ceiling is characterized high strength(up to 100 kg per 1 m 2), which often saves in case of flooding from above.
4. Such a surface is easy to clean thanks to a thin micron layer of Teflon.

Types of stretch ceilings

Before answering the question of how to remove a stretch ceiling, you should decide on its type. This information is usually contained on the letterhead of the company that installed the product.

So, the canvas can be:

• Made from PVC. Installation / dismantling of a similar design requires high temperature(about 70 degrees). If such warming is not provided, then you can simply ruin the canvas. A heat gun allows you to reach this temperature.
• Seamless fabric. The advantage of this type is the following point: the room does not need to be heated in order to install or dismantle the ceiling. It is recommended to start work from the central part of the ceiling and gradually move to the corners.

Mounting methods

So, stretch ceiling - how to remove it? The solution to this issue largely depends on what type of fastening was used during installation:

Required Tools

When answering the question of how to remove a stretch ceiling, you need to keep in mind that first you should stock up on such tools:

• a typical plaster spatula with sharpened corners;
• pliers, which are characterized custom size working "sponges";
• standard fitter's knife;
• heat gun of any type;
• clothespins big size, with which the film is usually suspended during dismantling.

Which method to choose in order to disassemble the stretch ceiling, you need to decide based on the type of its design.

We dismantle the PVC stretch ceiling

How to remove this type of ceiling? First you need to decide on the type of fastening. If the harpoon method was used during installation, then disassembly and reassembly of the ceiling is possible, and if using a wedge, then you can forget about re-assembling the structure.

Below is step-by-step instruction describing how to remove the stretch ceiling with your own hands:

1. Before starting work, you need to free the room as much as possible, and cover the furniture that cannot be taken out with a fabric on a heat-resistant basis.
2. Heat up the room with a heat gun. If the room is not warm enough, then dismantling works will be doomed to failure - the film will tear. Optimum temperature for parsing the canvas - at least 600 degrees.
3. First you need to prepare a stepladder and find an assistant who will hold the cannon. So to the question of how to remove the stretch ceiling yourself, you can safely answer: no way, since you can’t do without a second person.
4. The entire dismantling process must be accompanied by heating the web, as this greatly facilitates the workflow and avoids surface rupture. True, you need to remember that too close the location of the gun can damage the material.

Seamless fabric ceiling

How to remove, install a stretch ceiling, the material for the manufacture of which was a seamless fabric? If the fastening is spiky or wedge, then it should be done in the same manner as with a PVC sheet. The only difference is that there is no need to use a heat gun, and dismantling starts from the middle of the wall, and then gradually shifts to the corner.

The dismantling of the canvas, for which clip-on baguettes were used, has the following feature: it will not be possible to partially replace the material, since the stretch ceiling will have to be removed completely. If this is not done, sooner or later the clip will pop out, which will lead to the forced replacement of the entire ceiling.

Stretch ceiling repair

How to remove, install a stretch ceiling? This question can concern anyone, because a cut and a puncture are the damage that stretch ceilings are most often exposed to.

In the event of such a nuisance, each owner begins to think about how to correct the situation and at the same time spend as little as possible. It all depends on what material was used to make the canvas, and on the size of the “wound” itself.

Fabric ceiling repair

How to remove and install a stretch ceiling? If the fabric is damaged by a cut, then repair work it is quite possible to do it yourself. The detected damage should simply be sealed with a piece of glass fiber or a particle of material left after the installation work. For gluing a patch with reverse side usually transparent glue is used. At the end, the area to be repaired is recommended to be covered with paint of a suitable tone.

PVC sheet repair

If the location of the cut or puncture of the PVC film structure is near the wall (the distance is not more than 15 cm), then the dismantling of the canvas should begin from the side of the damage, cut off the affected area along the entire length, re-stretch the film and tuck it into the frame. This procedure will not change appearance surfaces.

If the damage is somewhat removed from the wall, then you should not engage in dragging the ceiling, as this will simply ruin it. In this situation, it is better to use the following tricks:

• the place of a small cut can be perfect for installing an additional lamp or ventilation grill;
• large size can be masked with a color application or a panel.

To eliminate a puncture on a PVC ceiling, the size of which does not exceed 1-2 mm, special glue is enough. It will not only hide the damage, but also prevent the canvas from diverge further. But to get rid of a large puncture, you will need to perform the same steps as with a cut.

We should not forget that if the installation of the ceiling sheet was carried out by specialists, then for repairs, you also need to call them, and not come up with a way to seal a cut or puncture. The thing is that an unsuccessful one will void the warranty for the installation performed earlier, which is why for the elimination of any negative consequences will have to pay.

The technology for creating stretch ceilings has been used by decorators for several years now. As optimization and improvement Supplies it has been noticeably simplified without losing its advantages. The owners of houses and apartments can still count on obtaining an original aesthetic effect while maintaining technical and structural advantages. How are ceilings of this type stretched? The operation consists of several stages - of course, delicate and requiring certain knowledge. However, the installation technique can be handled by a conventional House master familiar with a typical set of construction tools.

What is a stretch ceiling?

Such ceilings are formed by two main components - the supporting structure and the fabric web. Concerning load-bearing elements, then in the simplest solutions it can be an ordinary profile frame. Essentially, this metal slats, on which the fabric is subsequently fixed. The canvas, in turn, is stretched and fixed at the prepared mounting points. In more complex structures plastic baguettes are used. These are almost ready-made supporting structures that only need to be fixed. They are specially tailored to the size of a particular room.

How are multi-level ceilings stretched? This solution is rarely used in ordinary apartments, but you can also implement it on your own. For this, a two-stage frame is created - from the same profile elements or a baguette. The first level is attached directly to the ceiling or wall surface, and the second - already on installed frame first level.

Types of fabrics used

There are several classifications of canvases used in the construction of a stretch ceiling. For the consumer, differences in surface texture are especially pronounced - glossy, matte or satin. The first option is different in that the coating gives a reflection and mirrors the decor of the room, and the second two have a rough surface without glare. The question of how much the ceiling is stretched depends to a large extent on the material of the fabric, but on average the work is completed in 1-2 days.

The material is considered more familiar. Thanks to its practicality, work is done faster. However alternative solution in the form of polyester fabrics gives more advantages in practice. In particular, it is lighter and thin material, which is being processed special formulations. Due to the secondary treatment with coatings, it is able to withstand high temperatures and elevated level humidity.

Features of seamless ceilings

In terms of aesthetic and decorative value, seamless canvases are the most advantageous. These are fabrics that are made from polyester yarn, forming a knitted weave. Also, for a complete monolithic surface the fabric is impregnated with a polymer mixture, and then squeezed out and calendered. This is done in the factory, but in the future you can stretch such a canvas yourself.

How to stretch ceilings with a seamless surface? At the time of starting work, rolls with an individual size adjustment should be prepared. Installation is done using mounting profile- by vacation with pre-calculated moldings. In terms of texture and textural characteristics, woven fabrics have practically no drawbacks compared to film analogues. The variety of colors is just as wide and allows you to personalize any room.

Preparation for work

During preparatory work the performer is required to fulfill several points. First of all, measurements are made of the area that should be framed with a stretch fabric. Further, the material is purchased in accordance with the requirements - it is selected Basic structure as well as canvas. After that, proceed to the preparation of the tool and consumables.

Here it is worth taking a closer look technical side how the ceilings are stretched and what devices will help with this. Installation is carried out with a power tool - the main one will be an electric drill-driver. With its help, you can create holes in the walls into which load-bearing profiles will be integrated. You will also need a hand screwdriver, pliers, a level and a pencil with a ruler. In addition, to work with the canvas you will need a spatula and thermal equipment, which will melt the fabric structure.

Installing a Profile

Mechanical fixation of the carriers is carried out with the help of hardware, slats and corners. The choice of installation scheme is determined by the configuration of the room. Fastening can be made both to the ceiling and to the walls. It is important to be reliable. You should first evaluate how durable the surface is and allows you to make assembly operations. Holes are made with a screwdriver in the designated places - either dowels with anchors or mounting strips are fixed in them.

The question of how to properly stretch the ceiling will largely be determined by the type of fastening and the frame itself. In some cases, the canvas is attached in nodes adjacent to the fixation zones of the profile itself. Experts still recommend separating the technical areas of fastening. The best option- basic fastening of the strap on the hardware and separate installation of the canvas.

Web fixing

First of all, the attachment points are marked with a coloring cord and a hydraulic level on the base ceiling. After that, the fabric in the package is heated with a heat gun and straightened out. With the help of special clamping clips, the canvas is fixed to the profile structure or to the baguette. With a spatula, one of the corners is fixed in the frame using the harpoon connection method. Further, according to the diagonal scheme, the canvas is heated to 70 degrees and stretched over the entire area.

How to stretch the ceiling yourself without special tool? It is extremely difficult to implement this operation alone - except perhaps by using basting clips. If not outside help, then it is desirable to initially use rolls with polyester fabric. It is more pliable in terms of stretching and allows you to provide an elastic surface. At the final stage, it is necessary to bring the harpoon into the groove of the baguette or profile element.

Installation of fixtures

To begin with, it should be noted that the stretch ceiling makes it possible to lay communications in the subceiling niche, which is formed by the frame. In the stretch ceiling system, point LED lights. It is undesirable to introduce more massive devices into such niches. In addition, a base with cartridges must be pre-created, which will provide mechanical fastening of the device. Here we must return to the question of how stretch ceilings are stretched at the stage of fixing the profiles. They must be prepared with special sockets with a connection to the cable wiring. Further, the integrated lamps are framed with a special edging, on which the canvas is superimposed.

What are the benefits of stretch ceilings?

These are practical and simply beautiful coatings that also have physical endurance. For example, when flooded from above, they are able to withstand large volumes of water. As for mechanical damage, polyvinyl chloride is more justified in this respect - it is not afraid of accidental blows and stabbing effects, although it is not worth experimenting with such manipulations.

The only drawback is the tightness, due to which the canvas does not allow air to pass through. Hence the question - is it possible to stretch the ceiling so that it provides a ventilation effect? Unfortunately, in stone and panel houses it's impossible. concrete walls and the ceilings themselves do not allow this possibility. However, in wooden buildings it is advisable to use a ventilated fabric, which through the wood will also provide optimal regulation of the microclimate.

Conclusion

Installation operations of stretch fabrics are carried out without special equipment, and their quality will depend only on the skill of the performer. How to tighten it so that it lasts as long as possible? To do this, you first need to use quality materials. This also applies to baguettes with profiles, and the fabric itself. The quality of fastening and the configuration of the connecting nodes also matter. They should be rationally distributed over the entire area - so that there are no "empty" zones. As a rule, large gaps between attachment points and become in the future weak points the whole structure.

Many are worried about whether it is possible to remove the stretch ceiling, and then install it back. The need to remove the tension flow coating may arise due to various reasons. For example, if you have planned a move to a new place of residence and want to dismantle the stretch fabric in your old apartment so as not to spend money on buying new material. In addition, contaminants may appear on the surface, to eliminate which it is necessary to dismantle the entire structure. Therefore, the question of whether it is possible to remove the stretch ceiling, and then hang it, remains relevant. Before answering it, we suggest that you familiarize yourself with the features in more detail. various kinds this material. This will allow you to understand in which cases you can remove and re-fix the product.

Main varieties

There are two main types of surfaces:

• Film. Such products are made from a durable film made of polyvinyl chloride. The main advantage is water resistance, durability and unpretentiousness to operating conditions. They can be easily cleaned with a damp cloth and ordinary detergents. In this case, the surface will not be damaged and will not lose its original appearance. One of the most important virtues such products is that, if necessary, they can be dismantled from the ceiling and re-installed. If you are concerned about the question of whether it is possible to remove the stretch ceiling and stretch it again, you should choose film coatings.

• Fabric. Products made from shrink fabric are as popular as film ones. They have an attractive design and a pleasant texture, in which the fibers of the fabric are visible. During installation work, the product does not have to be heated, so there is no need to take it out of the room during the repair plastic structures which can melt at high temperatures. Interested in whether it is possible to remove the stretch ceiling and install it back? It depends entirely on the mounting technology you choose. If you want that there are no visible seams at the joints of the stretch ceiling and walls, you can use the harpoonless technology, in which the edges of the material are cut close. But in this case, the re-installation of the coating after its dismantling will be impossible. This can be done only on condition that the installation is carried out using harpoon technology, in which the edges are not cut off, but hidden in special grooves.

How is dismantling carried out?

The procedure includes several steps:

• Removing decorative inserts First of all, it is necessary to remove the decorative rubberized inserts that are located between the wall and ceiling covering. Removing them is quite simple - you just need to find the places where adjacent fragments of the inserts are connected to each other. Such places are securely camouflaged so as not to spoil the interior of the room, so finding them can take a lot of time.

• Warming up the room. The canvas can only be removed when certain temperature air (about 40-50 degrees), otherwise it may be damaged. To create such a temperature in the room, you need to use a thermal gas gun. She should warm up not only the room, but also the canvas. Lastly, it is the section of the material that is going to be removed first that warms up.
• Removal of the cover. After the room is warmed up to the required temperature, you can proceed to the removal. This is done with ordinary pliers. Coating rectangular shape it is desirable to shoot from the corners (for ceilings of the wrong geometric shape it does not matter - they can be dismantled from anywhere). In order not to damage the material, it should be removed with pliers from the profile with gentle movements. It is important to ensure that the area that you are dismantling is heated with a gas gun. At the final stage, it remains only to remove the fasteners that hold the profile from the walls.

Dismantling can cause certain difficulties for an unprepared person. If you have never done such work and have only a superficial idea about it, you should not risk doing amateur work, because in this case you can accidentally damage the canvas. As a result, you still have to call the masters who will bring the work they have started to the end, having done it efficiently and competently. To use the services of specialists, just contact our company.

Why choose us?

If you want installation or dismantling stretch fabric in your apartment were performed on highest level quality, use the services of our company. This will provide a number of benefits:

• Saving. We offer favorable prices for building materials and construction services. You don't have to spend a lot of money on repairs.
• Quality work. Our specialists have rich experience, deep knowledge and professional equipment. This allows you to effectively and efficiently cope with even the most complex species installation work.

• Free consultation. Do not know if it is possible to remove the stretch ceiling and hang it again? Having difficulty choosing a material? Ask your questions to the manager of our company.

Contact us - and soon we will install a ceiling that will delight attractive design and high performance!