Embedded appliances dimensions. Working principle: types of ovens. Built-in microwave oven

Household appliances built into furniture elements are increasingly coming into use, and some types of devices in the built-in version are almost mandatory in a modern kitchen.

Meanwhile, the acquisition of such devices has a number of features, and to decide on necessary list need in advance, since later it will be very difficult, if not impossible, to add elements.

And although specialists design and install kitchen sets with built-in appliances, you need to stock up on knowledge in order to check the correctness of their work.

Comparative Advantage

Embedded devices as opposed to stand-alone household appliances(also called solo) install into predetermined spaces and niches kitchen furniture . Thus, the kitchen as a whole benefits from an aesthetic point of view due to a clear docking and mutual matching of furniture and technical elements in color and style.

The absence of gaps and slots allows you to protect appliances from mechanical and chemical attack, extend their service life, and also ensure greater safety in the kitchen - there are no extra ledges, corners, etc. in the built-in furniture.

And it’s easier to keep clean, because it’s much easier to wipe a single surface than to clean narrow gaps from debris and plaque.

However, the main advantage of the built-in installation principle of equipment is ergonomics. Properly designed and high quality fitted kitchen more convenient, because the devices in it are in right points, in such a position and ratio with each other that cooking does not cause difficulties.

Useful and separate location separate parts various devices such as refrigerator and freezer.

True, embedded devices cost about a third more than their solo counterparts, and installation costs should be added to the price. But the cost justifies the convenience of the hostess and the order in the kitchen.

In addition, embedded devices usually emit significantly less noise, since they are made with improved sound insulation and vibration protection, which in turn affects the durability of the devices.

The obvious disadvantage of this type of technology is one. Separately standing devices can be easily replaced or moved to another location. You can't do that easily with embedded ones - need to rethink the interior, perform work on connecting individual parts with new furniture, check docking, etc. Not in all cases, such replacements will be possible.

Necessary and sufficient

The range of built-in appliances is very wide and has been constantly growing over the years. However, there is a basic, almost indispensable in last years installation kit is hob(panel) and oven. In fact, this is a long-familiar plate, divided into two parts for harmonious embedding and ease of use.

Manufacturers are increasingly releasing them as independent devices with separate control panels. This is convenient because it allows you to place the oven anywhere in the kitchen and at a convenient height. In addition, ovens have increased thermal insulation and forced ventilation from below, so next to them you can install any other devices and furniture items.

But next door to hob Do not place a refrigerator, washing machine or dishwasher. If this is nevertheless necessary for reasons of design or layout of the room, then in the gap between the two appliances it is necessary to provide, for example, a small cabinet with drawers 20-40 cm wide.

At least 4-5 cm of indentation must be left from the hob to the wall. In addition to full-sized hobs with a width of 60 cm, you can purchase enlarged (90 cm) and compact (45 cm). In addition, manufacturers offer modular systems(“dominoes”), most often 30 cm wide, from which you can assemble almost any geometric parameters and surface functionality.

Blocks can be gas, electric, glass-ceramic. They also offer special ones: burners for oval dishes, cooking oriental dishes, etc. The main advantage of the domino system is the ability to assemble a hob in the kitchen, where all the burners will actually be used.

Another must-have modern kitchen appliance - hood, which will save the kitchen from smoke and burning and purify the air. Install it in a hanging cabinet above the stove. Built-in hoods have, as a rule, a retractable panel, which increases the air intake area, while the free space in the cabinet can be used to store various utensils.

The kitchen is the main place in the house. Here people gather as a family for dining table, friendly gatherings are arranged, disputes are resolved and breakfasts, lunches, dinners and festive feasts are prepared. And they say that the kitchen is the soul of the hostess. Therefore, kitchen equipment should be taken seriously, given the practical and creative side of the issue. Combine creativity and ergonomics perfect cuisine you can choose the built-in technology.

Embedded technology has long ceased to be the lot of the elite. Now in many homes you can find a built-in hob and oven. And you can also build in the hood, refrigerator, dishwasher and, if necessary, a washing machine. Built-in appliances allow you to save space, organize it more conveniently and practically so that everything is at hand, and, most importantly, bring your ideas to life to the maximum. design ideas. All built-in appliances, regardless of the manufacturer, have standard dimensions that correspond to the dimensions of cut-ins in kitchen cabinets, so you can choose what you like from the many models on the market.

How to start choosing built-in appliances for the kitchen

First of all, you need to determine which built-in home appliances you need. To do this, you should take into account the spatial capabilities of the kitchen and financial opportunities, because built-in appliances are more expensive than solo ones. You can limit yourself to a built-in hob and oven, and this will be enough, or you can complement it with a built-in refrigerator or complete the kitchen with built-in appliances to the teeth. Here you decide. We suggest starting the selection of built-in appliances from the most important things in the kitchen - from the hob and oven.

Choosing a built-in hob and oven

By the way It should be remembered that hobs and ovens can be dependent and independent, and if you choose dependent (i.e. the hob is controlled from the oven panel), then they must have the same power source and the hob must be above the oven.

First of all, when choosing a hob and oven, you need to decide on the power source - gas or electricity, or choose gas hob and an electric oven. It should be remembered that hobs and ovens can be dependent and independent, and if you choose dependent (i.e. the hob is controlled from the oven panel), then they must have the same power source and the hob must be above the oven. You can read about the advantages and disadvantages of gas and electric stoves on our website in the article “Duel. Gas stove against electric. In case your choice fell on independent appliances, then you have the opportunity to experiment with the location of the oven and place it where it is convenient.

Now you need to pay attention to the choice of the material of the hob. Depending on personal preferences and financial possibilities, you can choose enamel, stainless steel, glass-ceramic or solid aluminum alloy. Enamel is the most inexpensive hygienic material, it withstands thermal and mechanical loads well and is presented in various colors, but is quickly damaged by acid. Stainless steel also durable and hygienic, but more resistant to acids and impacts. Glass ceramics are more expensive than the materials presented above, not only for their aesthetic qualities, but also for their good thermal conductivity in the vertical direction. As with enamel, you can choose a glass-ceramic hob in any color. The most practical are panels made of solid aluminum alloy because they are less prone to cracks, scratches and are easy to maintain.

For aesthetic purposes, it is advisable to choose the same brand for the hob and oven. When choosing an oven, the features of power sources and the dependence or independence of technology are taken into account. You can choose an oven with necessary set functions for cooking and the required safety measures. For example, there are oven options on the market with a double-sided door, which minimizes the possibility of getting burned.

Choosing a hood

Built-in hoods are somewhat more expensive than hanging hoods, but they allow you to hide the outlet pipe. There are fully built-in hoods and hoods with a sliding panel on the market. The former are completely hidden in fume hood and are practically invisible, the second ones - are put forward during the operation of the plate. It is worth remembering that the dimensions of the hood must match or exceed the size of the plate.

Choosing an integrated dishwasher

Depending on your personal preference, you can choose a dishwasher that is completely built into the cabinet, or one that leaves the button panel open. You can also choose a dishwasher that fits your size (from 4 to 13 place settings) or choose a machine with two wash compartments, which saves energy and water. Dishwashers may differ in terms of functionality. temperature conditions and washing programs.

Choosing a refrigerator

On a note When buying a built-in refrigerator, you need to decide whether it will be completely covered with furniture panels or whether the front side will remain open. In the first case, you do not have to worry about the design, as it will not be visible, and focus on the functionality and quality of the technique.

If desired, you can build a refrigerator. As a rule, built-in refrigerators do not differ in functionality and features from solo refrigerators. When buying a built-in refrigerator, you need to decide whether it will be completely covered with furniture panels or whether the front side will remain open. In the first case, you do not have to worry about the design, as it will not be visible, and focus on the functionality and quality of the technique. Also pay attention to the size of the refrigerator, it will depend on the space of the kitchen and the number of people in the family. You can build one-, two- or even three-chamber refrigerators. The location for the built-in refrigerator in your kitchen should be chosen so as not to block the flow fresh air to hot parts.

Today, there are a huge variety of options for built-in home appliances on the market, you will certainly find something that suits you completely. Moreover, the range of built-in appliances is not limited to ovens, dishwashers and refrigerators. You can build in a washing machine, and a coffee maker, and a double boiler, and whatever you want. Our shop will help you complete the kitchen according to your wishes and requirements.

When planning the interior of the kitchen, take into account not only technical features premises and area. It is necessary to organically fit furniture and equipment into the overall stylistic picture of the house. Appliances built into the kitchen in the headset will help to make ergonomic and comfortable small space small room. The possibilities of embedding equipment and small appliances in spacious rooms are not limited: technically perfect kitchen even the chef of the capital's restaurant will envy.

Built-in kitchen appliances functionally do not differ from classic samples installed separately. TO standard features additional may be added by the manufacturer. Built-in appliances are fundamentally different only in dimensions, the absence of external decorative side and rear panels, and equipment for fixing inside headsets.

Equipment set

Features of embedded technology: advantages and disadvantages of using

Can built-in kitchen appliances really save space in a cramped room? In fact, the dimensions of the devices range from ultra-compact to much larger than standard sizes. Advantages:

• Save space by separating hobs and ovens.

Ergonomics in a compact space

• Aesthetics and solidity of the kitchen interior.

• Huge selection of front panel designs.

Solutions for every style

• Compact models are suitable for installation in non-standard headsets with reduced depth.

There is only one drawback of the equipment: after installation, it is no longer possible to change the configuration and arrangement of equipment and furniture. The cabinet for built-in appliances in the kitchen will have to be completely redone, including replacing the facade.

Front panels to match the front of the furniture

Naturally, the price for individuality is high. A set of built-in cooking appliances will cost more than a gas or electric stove with a similar set of functions.

Large and small kitchen appliances: what can be built into the set

Number of devices that can be hidden behind furniture facades, depends only on the budget for equipment and the dimensions of the room. The most popular equipment:

• A hob whose dimensions are determined by the number of burners.

• Oven to be installed under the hob or in a tall cabinet.

• Hood, disguised by a closet upper tier.

Classic set of built-in appliances

In tiny kitchens, you can free up another meter of space if, instead of a classic refrigerator, 2 separate refrigerators are built into the set: a freezer and a storage area with a temperature of about 0 o.

An oven and a microwave can be built into the cabinet for kitchen appliances at the same time - you don’t have to look for a place for a microwave on the countertop.

Manufacturers of small kitchen appliances offer built-in models for all popular appliances. Bread makers, coffee machines, mixers and combines find their place inside the drawers, behind the facades, in the cabinets.

How to choose the best set: mini or maxi equipment

Before you go to the store, clearly define your own needs for technology. After talking with managers, you will want to buy a lot of extra stuff. Agree, it makes no sense to fix the equipment inside the furniture, which is used every few months.

Larger kitchens have more room for appliances

Choose the dimensions and functionality of the selected equipment based on the standard list of dishes that are cooked regularly. Determine the volume of the oven, internal refrigerator compartment, given the number of family members: why overpay for a roomy freezer that will be half empty? Remember that cabinets for kitchen appliances are selected usable area at the drawers for storing dishes.

Minimum set equipment for compact kitchens in apartments:

• oven and hob.

• Microwave.

• Fridge.

Dishwasher disguised in cabinet

If the size of the room allows, it is advisable to install a dishwasher, especially if a family of 3 to 4 people regularly gather at the table. Useful device, which is installed in the sink - waste chopper. In addition to disposing of leftover food that falls into the sink, the equipment will save the kitchen from the appearance of bad smell from the siphon.

In small city apartments, it often becomes necessary to install a washing machine in the kitchen - built-in models are perfect.

A washing machine can also be found in a cramped kitchen

Coffee lovers will be happy to complement the kit with a built-in espresso and latte machine: the coffee maker does not take up much space.

Ovens for kitchen sets: selection and installation

The first task is to determine how and at what points the oven and hob will be installed. There are independent products that can be installed separately, and dependent ones. In dependent kits, the equipment control unit is located on front panel cooking surface. most popular and convenient option- independent set of gas hob and electric oven.

How it works: types of ovens

Ovens installed in cabinets for built-in kitchen appliances are produced in 2 types - gas and electric. The cost of gas is lower than electric. Saving is not worth it. oven with electric heater more convenient: the temperature remains stable, does not deviate from the set value, the entire inner surface is heated evenly, without “cold” areas. Set up the perfect job gas oven almost impossible.

gas cabinet with mechanical adjustment

Side surfaces equipment are carefully insulated to protect adjacent surfaces from overheating. Pay attention to the front surface and the way the door opens. Standard option – hinged door. It is much more convenient to use an oven with a sliding door: a baking sheet is removed from the chamber along with the door, and it is impossible to burn your hand when taking pastries from a hot cabinet.

The surface of the front door must be made of heat-resistant laminated glass - the temperature of the front panel during cabinet operation cannot exceed 40°C. Design options are numerous.

IN classic kitchens look great enamelled surfaces from clear glass and decor, copper fittings, ceramic rotary retro handles. Modern interior decorate the oven with black glass on the door or a textured metal door with dark glass and touch controls.

Design for classic and retro kitchens

Functionality and dimensions: the complexity of choice

The size of the oven can be selected individually. The depth of the devices varies from 55 to 60 cm - this is standard depth lower tier headset. Above compact models produced with a depth of 50 cm.

The width and height of standard ovens is 60 cm. For small kitchens and low cabinets, choose models 45 cm high. Despite the loss of internal volume, a standard wide baking sheet enters the oven, and two dishes are rarely cooked at the same time.

For non-standard and limited spaces, manufacturers offer models with a width of 45 cm and a classic height of 60 cm. In such cabinets, you can bake in two tiers on narrow baking sheets. Depending on the dimensions of the built-in oven, the internal volume can be from 35 to 65 liters.

Be sure to think about the layout before choosing an appliance: built-in ovens in standard sizes are much cheaper.

Oven sizes: all available options

Functional Benefits electric ovens– in a large number of programmable operating modes. Even budget devices have at least 5-8 factory programs. In addition to baking modes, there are programs for grilling, convection, drying and cooking complex dishes.

Useful feature– self-cleaning of the inner chamber. Such ovens do not need to be washed. Cleaning is carried out according to the catalytic or pyrolytic principle.

Installation: calculation of the insertion point and installation

Installing a built-in oven begins with choosing a place for installation. If an independent set of appliances is chosen, it is better to build the oven at a higher height from the floor. In this case, you do not have to bend down to check the readiness of the dish or get pastries.

At what height should the oven be installed? The choice of mounting height depends on the height of the hostess. It is necessary to choose a place of installation so that you do not have to raise your hands above chest level to remove the baking sheet. The best option- embed the equipment in a high pencil case at a height of 40 to 80 cm above the floor.

Before installing the oven, it is necessary to check that the wiring and sockets are suitable for the conditions of increased load. An electrician should carry out the check: some models with a power of more than 3.5 kW require connection through a wire with an increased cross-sectional area. Sockets for connecting equipment are installed with mandatory grounding. Additionally, automation is installed for emergency shutdown current supply.

Installation and connection diagram

The installation of equipment in the cabinet is carried out by specialists who assemble the headset. The oven is installed in a niche. Manufacturers must indicate in the instructions the minimum gaps between the oven panels and the walls of the niche - free space necessary for air circulation.

The cabinet is fixed in a niche with factory fasteners.

Do-it-yourself installation is undesirable. In the event that the equipment fails due to incorrect connection, use of inappropriate electrical wiring, the warranty does not apply.

Cooktops for compact and large kitchens

A real salvation for small kitchens and decoration for spacious kitchen-dining rooms are hobs. The dimensions of the surfaces range from compact, for 2 burners, to large panels for 6 - 8 burners.

Types of heating elements of built-in panels

Main types of panels:

• Gas.

• Electrical.

• Combined.

Gas panels connected to the gas pipe outlet. The number of burners - from two. Great choice for not large kitchens where food is prepared for 1 - 2 people. Minimum Width- only 28 cm. Such narrow plates are suitable for headsets with reduced depth and length, which are made to order. Alternatively, 2 hobs can be installed in series with minimum dimensions- the number of burners will double.

Narrow glass-ceramic slab gas burners

The cost of panels with gas burners depends on the materials of manufacture of the grate, burners and coating. Saving is not worth it. Choose devices with massive gratings made of cast iron or durable steel. Thin rods of a budget grill are deformed in a few months, and it is difficult to buy a grill for a non-standard plate separately. Majority gas surfaces covered with an enameled decorative layer. Among the popular models are stainless steel metal panels.

Irregular Shape Touch Control Electrical Panel

Electric stoves presented in more design options. The top panel can be made of tempered glass or glass-ceramic. Advantage glass surfaces- impeccable appearance and ease of cleaning.

Features of electrical panels:

1. It is necessary to use dishes with a perfectly flat bottom.

1. The surface must be protected from impacts and falling sharp objects.

1. Liquid spilled on the panel must be immediately cleaned up - sugar leaves indelible marks on the surface of glass and glass ceramics.

Induction hob always stays cold

The most expensive and modern - induction panels. When the heating is on, the surface of the panel remains cold, and only the dishes are heated. True, for cooking on such a stove you will have to use special dishes.

Standard electrical panels are also equipped with zone heating. The surface is heated only along the radius heating element, the rest of the panel area remains cold.

Basic installation rules

The installation of gas or electric hobs begins with the selection of dimensions. The standard countertop is 60 cm wide. Almost any model can be built in with your own hands.

Manufacturers complete the equipment with a stencil template for marking the surface for the tie-in. It is enough to circle the outline with a marker. Cut into chipboard or MDF board the hole can be a jigsaw.

The gas panel is connected to the gas pipe outlet. The use of flexible gas pipes. The joints must be sealed with sealing tape and checked for gas leaks.

Electrical panels connected to the mains. Depending on the power, a wire with an optimal cross section is selected. Grounded outlets are used.

After checking the connection, you can fix the panel in the tabletop. Additionally, it is recommended to strengthen the fixation with a sealant.

Refrigeration equipment: is it worth hiding a freezer in the closet

The choice of refrigeration equipment is huge. Solo models on the market can be selected for any interior and room size. For small kitchens, choose a built-in refrigerator in kitchen set. There is only one limitation associated with the installation technology: first, the equipment is chosen, and furniture is made according to its size. Why is that? There are 2 types of built-in refrigeration equipment:

1. Fully embedded.

1. Partially embedded.

With partial installation, the side and rear panels are hidden in a niche, and the doors are left open. It is possible to build in a refrigerator with standard dimensions and a height of up to 2.1 m. This solution is suitable for medium and spacious rooms.

IN small kitchens space is often limited: you have to install a freezer and a refrigerator separately. Fully built-in appliances are invisible: the doors are hidden behind the facade of the headset. How to embed a compact refrigerator in a kitchen set? Masters calculate the dimensions of the niche with an accuracy of up to a millimeter. The refrigerator doors are equipped with guides that are attached to inner surface cabinet doors. When you open the cabinet, the refrigerator also opens.

Compact appliances under the worktop

Advantages of built-in technology:

• Refrigerator and freezer can be installed in different places.

• Compact models are ideal for small city kitchens.

• Created monolithic surface headset that visually enlarges the room.

Partially built-in two-door refrigerator

Built-in microwave ovens for cabinets

Standard size microwave ovens are unified with the dimensions of ovens for embedding in kitchen cabinets. The volume of classic models is from 28 liters. Dimensions:

• Microwave height standard - 45 cm.

• Width - 60 cm.

• Depth - up to 50 cm.

Mounting standard model above the oven

Standardized dimensions allow you to install the oven and microwave in one cabinet, placing the equipment vertically. The disadvantage of such a mounting scheme is the need for an accurate calculation of the mounting height. The oven is installed below, at a height of 30 - 40 cm from the floor, above it - a microwave oven. Be sure to ensure that the height of the installation of the microwave allows you to get a plate without raising your hands.

Mounting above the worktop in a hanging cabinet

Functionality different models differs drastically. To the basic functions - heating and defrosting - manufacturers add baking, convection, grill modes. Does it make sense to pay extra for the functionality that is already in the oven? Definitely not. Models with an extended set of operating modes will be useful to those who decide not to install a full-fledged oven. In this case, it is better to choose a product with an increased camera size. The maximum internal volume is up to 40 liters.

Video: self-installation of the oven

A video tutorial for those who decide to build an oven under the hob with their own hands.

Important point: when choosing equipment, focus on the average price category. It is not advisable to save money by buying equipment from unknown manufacturers. In addition to the fact that the equipment will have to be dismantled in order to be taken for repair, it may turn out that it is impossible to buy replacement parts.

Pay attention to the warranty period longer period free maintenance, the more reliable the equipment. Major manufacturers usually have representative offices and service centers in all cities. This means that you can find the part and carry out repairs as quickly as possible.

The sequence of work when replacing furniture and appliances: first choose a set of appliances, and only after that order a set with cabinets. Be sure to give the masters instructions and technical data sheets appliances. Don't experiment with self-installation electrical equipment - specialists will do everything much better and faster.

Reading your comments on the articles on the blog, I see that many are concerned about the seemingly elementary question related to whether it is possible to integrate this or that technique into a certain kitchen module or opening.

It turns out that for many this seems very serious, probably because the equipment itself is not cheap.

But, in fact, this is a matter of elementary arithmetic calculations (simply, there is no need to be very afraid of the price of the question itself).

I think that in this case, to cover this problem (and this is exactly what happens, for many, this is, oddly enough, a problem), it is appropriate to simply give a simple algorithm for these calculations.

So, from the very beginning, you need to understand the characteristics of the equipment that needs to be placed in the headset.

This information is in the instructions that come with them, or in the descriptions on the Internet-selling resources.

Here I will outline only the main points:

Opening in width - 560 (plus 8 to the big side).

That is, the cabinet is designed for a module, the width of which is also standard, in this case, 600.

If the material from which the box is made has a thickness of 16, then:

600-32=568 (560 + 8).

And if, for example, it is 18 thick, then:

600-36=564 (560+4).

As you can see, all calculations are suitable for this tolerance (and a material thickness of 20 is also suitable).

Restrictions will be for materials whose thickness is from 14 and below, and from 22 and above.

In this case, it will not be possible to build a cabinet into a box made of such material (600 wide).

In height, the opening of the box should be 600 (plus 4).

If a hob also crashes into the same module, then you should not “bother” with calculations for it.

Simply, you need to lower the only (located in the center) body bar in this box by 10 down, and calm down.

The cabinet has such a shape, under which this not tricky “operation” is done.

hob

In this case, it is under the same box, 600 wide.

The main thing to understand here is the dimensions of the hole for the tie-in (the diagram also indicates that the panel cuts into the countertop, the thickness of which is at least 20).

In this case, its width is 560 (plus 2).

Depth - 500 (plus 2).

Let's look at the width:

If the box is 600, and the thickness of the material, for example, is 16, then its internal opening is equal to:

The panel crashes into our box.

Width:

Under the countertop for 600:

This 100 mm is a size consisting, for example, of 60 and 40.

The first dimension is the distance from the wall (to accommodate the plinth) and the possible adjustment (trimming) of the countertop (if, of course, it is postforming, and allows it to be done).

The second is an indent along the front edge of the tabletop.

As you can see, everything is simple and clear.

That's all.

Built-in appliances attract buyers with their compactness, versatility and ease of use. But in order for the installation to proceed correctly, it is necessary to determine the parameters of the required home appliances relative to the existing headset.

For example, the width of the countertop will directly affect the installation of the dishwasher, oven and washing machine. But the parameters of wall cabinets will affect what kind of hood can be installed in the kitchen.

Built-in kitchen appliances (dimensions): company standards

Because embedded companies kitchen appliances, are located in Europe, and now domestic headset manufacturers are trying to switch to accepted in European countries parameters. For example, the width of the tabletop, which plays one of the most important roles, should be at least 60 cm. This will allow you to most comfortably build in an oven with parameters of 60 cm in height, 60 cm in width and 57 cm in depth. So there will be quite a lot of space up to the wall, thus the connection will be comfortable, and at the same time the margin will allow you to place small plastic inserts to protect the far edge of the countertop.

As for built-in hoods, they often have the following dimensions: 18-20 cm high, 60 cm wide and 45-48 cm deep. Respectively wall cabinet, located above the oven or stove, must have a depth of at least 50 cm. It is also necessary to take into account the dimensions of the duct to be installed. And in this case, it all depends on the model of the manufacturer and the availability this component included or not included.

Built-in refrigerator most practical thing, which will not soon require replacement. Depending on the parameters, it can be installed both above the countertop in a small cabinet on the side, and fit into a pencil case. The most common sizes of built-in refrigerators are: from 80 to 180 cm high, from 54 to 56 cm wide and about 55 cm deep.

Not all owners consider it reasonable to buy a built-in refrigerator. But this purchase definitely makes sense. For example, the appearance of a refrigerator can spoil the style created in the kitchen. And with a hidden location, it will not be visible and will fully satisfy the stylistic wishes of its owners.

Refrigerated built-in chambers can also be sold separately. They are perfect for stand-alone installations. And in particular, small refrigerators, 80 cm high, do not contain the amount of food that is required. A separate freezer in this case will be the most best solution. Its parameters are approximately: 50 cm in height, 60-80 cm in width and 55-60 cm in depth.

Built-in washing machine and dishwasher

It is impossible to imagine a comfortable life without a washing machine and dish washing machine.

They are attractive because they are completely hidden from prying eyes and do not violate the created ideal design.

On top of the machines there will be a headset tabletop, which is why special attention should be paid to the height indicator of the equipment itself when embedding.

For washing machine normal parameters will be 80 cm high, 60 cm wide and 55 cm deep. Accordingly, it will easily fit into the bedside table in depth, and the door will close tightly. But do not forget about the width indicator. If it is more than necessary, you will have to perform some redevelopment and subsequent reassembly of the headset. Which is definitely inconvenient, and sometimes completely impossible.

Regarding the size of the dishwasher, it is also worth knowing in advance for proper and convenient installation. Most common options dishwashers are about 80 cm high, 45-60 cm wide and 55 cm deep.

Accordingly, it will not be difficult to immediately select both a washing machine and a dishwasher, as well as to install them. Modern manufacturers try to make goods with approximately the same parameters. However, there is still the possibility of purchasing components that are not suitable for co-installation. Therefore, it is best to purchase embedded equipment from one company.

Built-in microwaves and ovens

The microwave oven is one of the most convenient devices in the kitchen. And a large number of built-in models can be found on the modern market.

In particular, microwave ovens may have the following dimensions: 37-40 cm high, 60 cm wide and about 30-35 cm deep.

It must be remembered that it will not close like a refrigerator from prying eyes, and therefore you should take seriously stylistic direction in which the technique was performed.

The most common models with a darkened front. Quite often it can be framed in white, black or silver panels. Each option is good in its own way, but you need to select the equipment individually for your kitchen.

The last thing you should pay attention to is built-in ovens. With their help, you can cook not only a gourmet dish for dinner, but also make a breathtaking dessert or bake bread. There are a lot of functions and each of them is useful.

In the event that the owners first installed the hob, and decided not to buy an oven, a built-in oven will be the right solution.

He, like the microwave, will always be in sight. Therefore, when buying them together, you should choose equipment from the same collection or made in the same style.

The standard dimensions of built-in ovens are: approx. 60 cm high, approx. 60 cm wide and approx. 55 cm deep.

When drawing up entire schemes for the location of equipment, you can quite comfortably use a side cabinet-pencil case for installation freezer, microwave and oven. But the option of installing a microwave and an oven on the same level is also very attractive.

Installation of built-in dishes should be done gradually. Of course, it is difficult to connect all the components in one day, but at the same time it will immediately become clear how original they will be combined. In addition, the use of all of the above types of devices will create maximum convenience in the operation of the kitchen.