Means for cleaning the induction hob. Proper care and cleaning products for hobs. Care of AEG boards

Let the surface cool down, be sure to put on rubber gloves, apply a cleaner, leave for a few minutes, remove with a sponge or cloth, and then with a dry cloth.

A cleaning agent for glass ceramics can be of the middle price segment, the so-called "mass market" and professional: as a rule, these are produced by manufacturers household appliances. As a rule, the latter are more concentrated and require less time and effort to clean, are sprayed thin layer using a spray gun and contain silicones, the thinnest film of which covers the hob after cleaning. Means for glass ceramics are very different in composition, you just need to say on the packaging that you can clean glass ceramics.

Glass ceramic: requires tenderness

A soapy solution may well replace a glass ceramic cleaner if the pollution is not very strong.

Window cleaner and glass with ammonia are also a good entry, but they will not remove strong burnt dirt.

Surprisingly, it helps to remove complex contaminants olive oil half with soda - pour on the stain, leave, rub kitchen towel. True, this is an expensive pleasure. Another from the folk arsenal: 9% vinegar or a mixture of vinegar and soda (no need to rub glass ceramics with dry soda, first extinguish it with vinegar or a solution citric acid in a bowl and make a slurry).

Melamine sponges, or eraser sponges, are an excellent care product for glass ceramics.

Melamine sponge or eraser sponge

Strong dirt can be removed with a glass ceramic scraper (necessarily special, and not any other). It is important that the scraper comes with several replacement blades.

After cleaning, polish the surface well with a microfiber cloth, paper kitchen towel or soft cloth.

Contraindications

You can not clean the glass-ceramic panel if it has not cooled down yet - stains will appear, and you can burn yourself and inhale the evaporating "chemistry". If the appliance has residual heat indicators, it is more convenient to navigate.

You can not use the same sponge as for dishes: there is undissolved fat on it, with which you will stain the stove. In general, a clean sponge is important.

You cannot scrape glass ceramics with anything that is not specifically intended for it: knives, blades, metal mesh "graters", crumpled newspaper, etc.

Do not use abrasive detergents and those that are not intended for glass ceramics.

Do not cook on a glass-ceramic surface in a pan with an aluminum or simply uneven bottom: spoil the surface.

Gas on glass: the same glass-ceramic

How to care for stainless steel

Stainless steel care products are often referred to as polishes. As a rule, the same compositions can be used to care for stoves, sinks, refrigerators and other surfaces made of of stainless steel. The goal is not only cleaning, but also maintaining the “expensive” appearance for which we value steel in industrial design. Before buying a product, read the instructions for your household appliances: it may use an easy-to-clean coating, and then the aggressive effects of chemicals can damage it.

For the care of stainless steel, there are many folk remedies: rub the surface with lemon and salt, just lemon juice or a solution of citric acid, vinegar - everything works.

Stainless steel hob

Contraindications

Abrasives are prohibited, as is the case with glass ceramics. Cleaning agent should not be in powder! The strength of stainless steel is undeniable, but metal sponges and hard granules will leave micro-scratches.

Do not immediately start rubbing: let any agent work for 10-20 minutes.

In no case do not use compounds with chlorine: a whitish coating will appear.

How to care for the enamel coating of the stove

Enamels, no matter how they are improved, still remain the most unstable coatings: over time, they become covered with micro-cracks, even if they do without chips. At the same time, these are the most unpretentious materials in terms of the choice of detergents: it is possible with chlorine, it is possible with alkali, it is possible with acid. You can’t just mix all this - such vapors are formed that are dangerous to breathe. On the other hand, all these products are quite aggressive and will damage the enamel over time.

enameled plate

There are many folk life hacks, of which the most effective is a mixture of 50 ml of ordinary hydrogen peroxide, 5 ml liquid soap and 100 g of soda. Apply evenly and leave for a few minutes. Wipe dirt off with a sponge. It should be chic and shiny.

Contraindications

What not to do with enamelled surface? Firstly, you can’t drop anything on it - gratings, covers, etc., so that there are no chips. Secondly, you should not scrape it with anything metallic.

How to clean the grate

If the stove has removable grids, they can be washed in dishwasher– just add a little more detergent than usual. Before washing, do not forget to remove the silicone and rubber parts, if any: they will be lost. The method is suitable for steel and enamel grates, but not for cast iron.

Cast iron grate: not dishwasher safe

If there is no dishwasher, the oven will help: put the grates in a deep baking sheet, fill with water and put on a slow fire for 20-30 minutes, after which most of the dirt will get wet, and the rest can be removed mechanically. Of course, you can just soak it in a basin, but with heating it is more effective.

Folk wisdom tells us to use all cleaning mixtures: vinegar with soda, just soda, the mixture of liquid soap, ammonia and hydrogen peroxide mentioned above, as well as dry mustard powder: dilute it to a gruel state, coat the grate, wait, remove with a newspaper or paper towel.

There is also a more radical effective method: burn the grate on the fire - it can be a brazier in the country (yes, you need to take it to the procedures), or a burner: remove the grate and put it in a dirty place right on the fire. The disadvantage of such a home “pyrolysis” is the smell and burning, but if there is an extractor hood, it is acceptable.

More modern way- the same melamine sponges: rubbed - removed dirt with a rag or paper towel. But the melamine sponge will not take persistent and long-standing pollution.

You can clean the grate with a coarse mechanically: a brush attachment for a grinder or a drill. This is done dry, the results are excellent, but you need the skill and ability to handle tools. You can use the steam cleaner brush attachment.

Brush attachment: great for gratings and hard-to-reach places

Contraindications

Do not wash cast iron grates in the dishwasher: they will rust, in addition, cast iron is a fragile material and may suffer. It is not worth cleaning cast-iron grates with a nozzle on a grinder and a drill for the same reason - your hand will suddenly tremble.

All-purpose cleaner - steam

A steam cleaner can clean almost any surface, but magical properties the steam is a little exaggerated: it perfectly softens the dirt, and then all the same sponges and scrapers are needed. If the pollution is quite fresh, then you can use the special cleaning nozzles of the steam cleaner - with a microfiber cloth or brush (this method is for cleaning grates). Steam cleaner manufacturers also recommend using nozzles with metal meshes- supposedly the steam creates a kind of "cushion" and the surface is not scratched by the mesh. Everyone is free to check, but it is doubtful.

The induction hob usually has a glass-ceramic coating. It looks aesthetically pleasing and stylish, it is not difficult to care for it. The main thing is to choose the right means and keep a few simple recommendations for cleaning glass ceramics.

Induction cooker care products

If you purchased a glass-ceramic cooking hob, then you need to take care of the fixtures and cleaning products. You will need:

• Scraper. It can be plastic, rubber or more durable - steel with a removable blade.

• Special cleaners for glass ceramics. They do not scratch the surface, effectively cope even with stubborn dirt. A nice bonus - after using such products, a thin silicone film forms on the glass-ceramic panel. It will protect the delicate material from damage, and will also facilitate the cleaning process in the future.

Notable Manufacturers household chemicals for the care of glass ceramics - "Top House", "Domax", "Selena-extra". To remove greasy, stubborn stains, the following products can be recommended: KENOLUX GRILL, Adriel, Bagi Shumanit grease remover.

• Soft sponge, microfiber cloth.

• Melamine sponge.

• Wipe the hob after each use, immediately eliminate any dirt that has appeared.

• Do not use hard brushes, metal sponges, abrasive or aggressive cleaning agents. They leave scratches, cracks, which in the future will cause damage to the entire coating.

• Select your own, separate, sponges and napkins for cleaning glass ceramics. They can't wash dishes. This will prevent grease from getting onto the surface of the panel, as well as small particles food, which during the subsequent operation of the plate will not only burn out, but will lead to discoloration of the coating.

• Apply the cleaning agent to a damp sponge, not to the hob itself.

• Refuse to use oven care products - they are not suitable for glass ceramics in composition. By the way, it’s better not to take a cleaning agent for dishes - after it there are stains and stains of a bluish tint. Sometimes you can use glass cleaner.

• Finish cleaning the stove by wiping the surface dry. This will avoid ugly divorces, and metal elements protect against rust.

How to properly clean glass ceramic hob

The stove will always look clean if you wipe the surface after each cooking. Fresh traces, stains are much easier and faster to remove.

The technology of conventional cleaning is as follows:

1. Moisten a soft sponge in a soapy solution or apply a special agent for washing glass ceramics on it.
   Wipe the hob thoroughly.
2. Use a damp sponge to pick up any remaining detergent.
3. Wipe the surface with a dry cloth or polish with a paper towel.
4. If necessary detergent you can treat the surface again, leaving it to act for 30 minutes, and then rinse.

Note: it will be possible to remove stains if a solution of ammonia then thoroughly wipe the surface dry.

Removal of various contaminants

Consider the most common types of stains that leave the following substances:

Sugar

The melted sugar mass should be removed before it has cooled. To do this, use a scraper, acting slowly, without much pressure. If the sugar has had time to cool, then before cleaning the panel, spray on the stain hot water. After that, the heated mass is collected with a scraper. When all the sugar has been removed, the surface is washed with glass ceramic care product.

burnt food

Apply hot water to the burn and start gently scraping it off with a scraper. Remove the remains of burnt products gradually, in layers, constantly wetting the surface with water or wiping with a damp sponge.

A melamine sponge will also help remove carbon deposits, which will erase dirt like an eraser.

What to do if plastic, aluminum foil melted, a rag burned? You should try to immediately remove the contamination with a scraper. In the case when the molten material has had time to cool down, hot water is applied to the stain and only then the burn is scraped off. Finish cleaning the stove in the usual way.

Another option for cleaning soot is to use vegetable oil, and it will cope even with a dried stain. The contaminated surface is treated with oil, left for 30 minutes. After this time, the burn is easily removed with a scraper. It remains to rinse the panel, and the stove is clean again.

Fat

sustainable greasy traces can be removed with baking soda. It should be diluted with water until a thick slurry is formed. Apply this mixture to a damp sponge and then treat the stains. You can briefly leave the substance to act, but just do not allow it to dry out. At the end, it remains to collect soda gruel, which will absorb fat, and wipe the surface.

Limescale, streaks

Stripes from water, stains after cleaning are removed with vinegar solution. Vinegar is mixed with water in equal proportions. For convenience, the prepared mixture is poured into a spray bottle. The substance is applied to the surface of the plate, left for 3 minutes. Remove the remnants of the substance first with a damp sponge, and then wipe with a dry cloth.

Manufacturers of kitchen appliances constantly surprise their fans with new ones. technological developments. Not so long ago, models of stoves with glass-ceramic surfaces have gained popularity. new material showed up with best sides in the most different aspects operation - from safety to heating efficiency. But not the most pleasant nuances of caring for him were also quickly discovered. How to clean This is one of the key issues to consider when buying these models, as standard maintenance methods are not enough in this case.

Basic cleaning supplies

Most reliable way cleaning involves the use of products recommended by the manufacturers themselves. Usually they also produce devices for the care of glass ceramics. Cleaning kits include two main components - the detergent itself and the scraper.

As for drugs, they are usually supplied in 500 ml vials. At the same time, this volume is enough for a long time, so you should not stock up on additional mixtures. This glass-ceramic hobs cleaner is specially formulated to remove limescale, food residues and grease stains without harming the surface. Moreover, some means protective covering in the form of a silicone film. In turn, the scraper can be made of plastic or metal. The choice between these materials is not fundamental, since in this case there are no special requirements for the reliability of the device. Another thing is that metal is more durable, and plastic is lighter and more practical.

Folk recipes

If for one reason or another there was no special at hand, then you can resort to folk recipes. First of all, you can use dishwashing detergents, baking soda or glass cleaner. It is best to prepare creamy pastes, which are easier to apply and treat the surface with them.

A good cleaner for glass-ceramic stoves is table vinegar diluted in water. Together with effective solutions that rid the surface of dirt and stagnant stains, it also provides a disinfecting effect. If in household there was no special scraper for working with glass ceramics, then it can be replaced with a soft structure. The main thing in preparing for care according to folk recipes is to insure the stove from deep scratches.

Cleaning technique

Wait until the hob has completely cooled down before working with food residues and loose burns. The state of technology can be determined by a special temperature indicator. More important question how to clean a glass-ceramic hob if foil particles have stuck to it or sugar has melted on the surface. In this case, the surface that has not cooled down should be processed. The complete scraper mentioned above is used. It resembles a small razor, which is easy to remove foreign particles from the surface. But this must be done carefully, without leaving cuts.

Detergents go into action after the main dirt has been eliminated from the coating. It is necessary to evenly distribute the composition on the plate, after which, using a sponge, perform circular cleaning actions. The last stage is also very responsible. The answer to the question of how to clean a glass ceramic hob so that it does not leave marks also depends on the quality of the materials used. On the final stage rinse off the cleaning solution and wipe the surface with kitchen soft cloths resembling fiber in structure.

How not to clean glass ceramics?

First of all, you should stop using specialized funds designed to work with ovens. As a rule, these are effective sprays and stain removers that give a good cleaning result, but due to chemical properties not suitable for sensitive coatings.

A new glass-ceramic induction hob often has an adhesive layer on the surface. They mistakenly try to cope with it with abrasive coarse-grained tools. This should not be done due to the high risk of surface damage. Again, it is worth using the delicate function of the scraper, which will save glass ceramics from such unwanted coatings.

The nuances of cleaning models "Hans"

Hansa belongs to the group of manufacturers who in any case do not recommend maintenance of boards that have not cooled down. Also, the manufacturer warns against the use of even sponges that are soft in structure, since they are capable of causing minor damage. How should the Hansa stove be maintained in terms of compliance with the operating rules? Care should be as delicate as possible and with the use of mild products. These include emulsions and liquids designed to remove stains.

In extreme cases, in the absence special solutions combination can be used warm water and dishwashing detergents. As for the tool itself, the Hansa cooker comes with the same scraper, which will help remove particularly problematic particles from the surface of the glass ceramic.

The nuances of cleaning Gorenje models

This manufacturer also does not advise taking care of stoves that are in a heated state. To get rid of dried particles, the company recommends specialized formulations. She refers to such funds "Sidol", "Kerram" and similar to them in terms of a set of components.

It is important to note that glass-ceramic is also afraid of rough cleaners, which include metal sponges, alkalis and

Care of AEG boards

AEG modellers strongly advise not to wait for melted sugar or plastic to solidify on the surface and then deliver more more problems during the cleaning process. The same scraper should immediately eliminate the dirt, and then carefully remove the stains with a paper towel. In this case, the question of how to clean the glass-ceramic stove can also be solved by heating the equipment. According to AEG experts, this measure will help soften the structure of some types of scale and facilitate the process of their removal. At the final stage, the final cleaning is performed with a dry cloth or a new paper-based towel.

Conclusion

The induction principle of operation of modern cookers attracts a growing audience of consumers. Such models are good and effective heating, and ease of use, as well as a high degree management functionality. But it can provide all of these benefits only in the case of competent care.

If we combine recommendations for the maintenance of glass ceramics from different manufacturers, then the rules will be reduced to several principles. First of all, when choosing a cleaning method, you should be guided by quite affordable special means designed for plates of this type. As for the limitations, they are quite definite - the glass-ceramic surface can be spoiled with strong chemicals, coarse abrasive brushes and sponges, as well as powders, the grains of which can cut the sensitive coating.

Axioms of glass ceramics:
Glass ceramics do not like aluminum, sugar and plastic.
Do not clean glass ceramics with a knife, brush, steel wool or abrasive cleaners.

Recommended products
When purchasing a hob or stove with glass-ceramic surface, you need to buy a special detergent and a scraper. These related products are sold in hardware stores and home appliance stores. Sometimes they are included in the kit along with the stove (the price is included in the cost of the panel or stove). If the scraper is made of plastic, then it will not last long. A steel scraper with removable metal blades is much more reliable. Accessory design is somewhat reminiscent of a razor. Compared to washcloths, sponges and detergents, it is expensive. For example, a kit from Electrolux can cost up to 330 rubles (a scraper and a set of ten replacement blades). Buying a special product for washing glass ceramics (500 ml bottle) can cost from 130 to 300 rubles. In fairness, you can see that the bottle lasts for a very long time, since the consumption of funds is small. But the effect of its use is very noticeable. The glass-ceramic surface will be much easier to keep perfectly clean, as the product not only removes limescale, food residue and grease stains, but also creates a thin protective silicone film. The film prevents the build-up of food residues and grease, facilitates the cleaning process and protects the surface from liquids with a high sugar content.

Cleaning technology: expert advice
AEG recommends: “First use a scraper to remove food debris. aluminum foil, melted plastic and burnt sugar are best removed before the surface has cooled. If this happens, you should warm up the stove again so that the contaminants melt. Then it is easier to scrape them off with a scraper. Then the surface must be allowed to cool and apply a special glass-ceramic cleaner to it, gently rubbing it with a soft cloth or paper towel. The surface is then carefully cleaned. wet towel and wipe dry.

At first glance, everything is very simple and clear. But there are some nuances that should be taken into account in a number of specific cases.

Do not wipe the surface with a sponge for washing dishes, because. traces of detergent or grease may remain on it, when the stove is turned on, they burn out, which leads to discoloration of the surface. The glass ceramic around the burners can be cleaned soapy water with a piece of soft, clean cloth.
Grease splatter, limescale, water stains and stains that change the color of the surface can be removed with steel cleaners or special formulations for the care of glass ceramics. Detergents should only be applied to the completely cooled panel. After cleaning, they must be completely removed from the surface being cleaned, as they can have a corrosive effect on the glass-ceramic coating.
limescale can be removed with a mild vinegar solution. If you use dishwashing liquid to care for the glass-ceramic surface, bluish stains may remain on it. They do not affect the operation of the device, but are not always removed even with special compounds.
Stain removers and oven sprays should not be used to clean glass ceramics.
Ardo experts believe that glass ceramics can be cleaned with glass cleaners.
Avoid contact with the hob particulate matter- for example, grains of sand. They can damage the glass-ceramic surface.
The burners must always be kept dry, wet pans or splashes of salt water have a negative effect on glass ceramics.

Consumer opinion
Russians have always been distinguished by their great ingenuity and creative approach to solving everyday problems. What home remedies do housewives recommend for caring for glass-ceramic coatings?
good remedy baking soda is considered to be used for cleaning the hob. Wet powder is applied to the surface with a damp cloth and perfectly removes dirt.
To create a protective film, after washing the glass ceramics, wipe the panel with a soft cloth moistened with a small amount of vegetable oil.
An ordinary razor will successfully replace special scrapers.
Some detergents designed for cleaning kitchen area, are also suitable for the care of glass-ceramic surfaces, but they should be selected with great care.

To follow these tips or not is a personal matter of the hostess. However, do not forget that hobs and stoves coated with glass ceramic are not very cheap, so it is better to treat them with care, following the instructions given by the manufacturers.

Traces of lime and water, splashes of grease and stains with a metallic sheen (by the way, a very common problem), which change the color of the surface, are removed with cleaning agents for stainless steel products (before cleaning, we check the product again for abrasive content). We recommend using stainless steel cleaners in the form of special foam from well-known manufacturers. Detergents must not come into contact with the hot glass-ceramic hob! Rinse off detergents completely after cleaning. clean water. If you don't want stains blue color on the stove - do not use dishwashing detergent for cleaning. These stains hopelessly spoil appearance plates and it is almost impossible to remove them even with special means. The only consolation is that they do not affect the operation of the panel.

What can damage glass ceramics?
Glass-ceramic coatings are highly mechanical strength and are able to withstand very significant loads during the operation of the kitchen. But they are afraid of pinpoint strikes. For example, dropping a knife point down can lead to a web of cracks. In practice, such a nuisance is rare, but in theory everything is possible.
Do not put wet and cold dishes on a hot burner, it is recommended to avoid getting cold water splashes on a hot surface. Perhaps nothing terrible will happen the first time, but if this prohibition is systematically violated, glass ceramics may not withstand.
The glass-ceramic panel of a neat hostess will last much longer than that of a forgetful lady, whose liquids constantly “run away”, falling onto neighboring burners that have not yet cooled down. The destruction of the coating structure occurs gradually, it becomes noticeable not immediately. But, sooner or later, cracks will become visible, the panel will become unusable.
Dried, dirty rags are absolutely not suitable for cleaning glass ceramics. They can do more harm than good due to old contaminants passing onto the hob.

Two problems
Ideally Smooth surface glass-ceramic coating works against the hostess in the case when spilled on the stove a large number of liquids. All of it flows completely unhindered along the walls of the plate to the floor. If it is water, then everything is not so scary, but the streaks from the rich soup will have to be washed thoroughly and for a long time from the body of the stove, furniture and floor.

The second problem is that it is quite rare for a stove to be equipped with a small diameter burner suitable for a cezve or a geyser coffee maker. You have to choose between not preparing your favorite invigorating drink and the risk of damaging the device as a result of improper operation.

Why we choose glass ceramics
After reading the first part of the article, many will ask a quite reasonable question: is glass ceramics worth all the troubles described above? Of course it's worth it. After all, it is not only beautiful, but also very convenient and profitable.

Take my word for it that a description of the features of the operation of conventional enameled electric stoves with pancake heating elements would take no more than less space. In addition, we took into account all possible situations, some of which will never happen to one single plate. In fact, the hob or stove with glass ceramic hob can serve long and trouble-free.

Such attention is paid to glass ceramics precisely because it has appeared on the market recently, and for many housewives it seems to be an unexplored novelty. However, every woman is able to appreciate the unique thermal conductivity of glass ceramics, which allows you to cook dishes much faster than using a standard enameled electric stove.

High thermal conductivity vertically and low horizontally can significantly increase the efficiency of the device by directing the entire thermal energy directly for cooking, and not for heating the entire hob.
The overall power consumption is reduced.
The glass-ceramic cools down quickly, allowing a dynamic response to the turn of the switch. Previously, this was only available for gas stoves.
Changing the heating zone. It is possible to adjust the heated area, which allows you to use dishes with different diameter bottom.
Possibility to change the shape of the heated area (it is possible to use ducklings and goslings, vessels of various configurations).

11/15/2017 1 5 105 views

Modern stoves with a glass-ceramic surface are purchased more often than other hobs. This is explained original design and ease of care. Consider how to clean the glass-ceramic surface of the stove from grease.

Basic rules for the care of glass-ceramic surfaces

When purchasing a plate with a surface of glass-ceramic material, you need to be prepared for the fact that the thing will require careful and accurate care. Of course, it is necessary to take care of all stoves, but hobs of this type are especially in need of this, since stains form at the slightest contact of fingers with the surface. And what about oil splashes or spilled broth.

1. To keep your glass-ceramic cooker looking its best, clean it every time after cooking. Otherwise, cleaning can turn into a real nightmare.
2. for washing hob, use a separate cloth. That is, even the rag with which you erase dust from glasses and mirrors will not work.
3. To eliminate dirt, use window cleaners.

Thus, it is not difficult to take care of the hobs. The main thing is to do it regularly, as well as follow a few recommendations.

• Before cooking, pay attention to the condition of the surface of the stove. It must be dry and clean.
• Pots and pans must also be in perfect condition. One drop of salt water can greatly complicate the cleaning process.
• Eliminate traces as soon as they appear.
• Wait for the panel to cool down before using the cleaner. The temperature can be monitored by special indicators.

Clean the stove with a glass cleaner as follows.

• distribute the composition over the surface;
• increase the dose in particularly contaminated areas;
• wash off the chemicals;
• dry the surface with a dry cloth.

Avoid getting the smallest abrasive particles on the cooking hob, as they easily scratch it.

Special cleaners for glass-ceramic stoves

Household chemicals for cleaning glass-ceramic stoves easily and effectively remove pollution in the form of:

• fat;
• scale;
• fingerprints;
• burnt spots.

At the same time, the compositions do not scratch upper layer. In addition, the products provide easy further cleaning of the plate, since the ability to form silicone protective film, allows you to protect the top layer from dirt and damage. Also, the substance serves as a protection for glass ceramics in case of contact with a sweet liquid. The composition not only eliminates bad smells but also aromatizes the surface.

Experts believe that you can wash the glass-ceramic hob with window and mirror liquid.

1. When the device has cooled down, apply a special liquid.
2. Lightly rub it in with a rag.
3. Remove moisture with a dry, clean cloth.
4. Enjoy the radiance of the surface.

Use composition for tiles. In general, for cleaning glass-ceramic stoves, compositions for washing other equipment, such as refrigerators, are used. However, in any case, it is important to pay attention to the composition of the chemistry. In order to remove dirt from the hob, it is not enough to use a cleaning agent. You will need a special scraper. They are:

• plastic;
• steel.

A plastic scraper will not last long, so get a steel product with removable blades. Steel scrapers remind conventional machine for shaving. Some even try to replace them with a machine, which is absolutely impossible to do.

How to clean a glass ceramic surface at home?

To ensure that your glass-ceramic hob always shines with cleanliness, remove dirt immediately after cooking. Old traces are much more difficult to remove than fresh ones. You can eliminate grease and carbon deposits from a glass-ceramic surface at home using methods that have been tested by time and people.

vegetable oil

To remove dirt from the unit, use vegetable oils. They not only clean the ceramic slab, but also protect against the formation of dirt, as they leave a film on the surface that cannot be seen with the naked eye.

1. Put a few drops of oil on a cloth.
2. Wipe dirty areas.
3. The oil should not be washed off. This will allow you to easily remove stains with a sponge and water in the future.

Olive oil is great for removing stains. It eliminates what even a scraper could not cope with.

• moisten soft tissue oil;
• apply to pollution;
• after half an hour, wash off with one or another detergent composition;
• treat the top layer with water;
• use window cleaner.

Lemon juice and baking soda

If the hob has formed old spots with which even oil could not cope, use this mixture. The procedure eliminates complex pollution without damaging the top layer.

1. Take baking soda.
2. Add as much water as necessary to obtain a uniform consistency.
3. Spread the paste over the glass ceramic hob.
4. Scrub the dirty areas with a sponge.
5. Rinse with clean water.

If the stain does not rub off, on the surface with dried soda, drip lemon juice. There will be a neutralizing reaction that will quickly break down the stubborn layer of dirt. It is worth noting that with the help of soda not only wash the surface of glass ceramics, but also eliminate unpleasant odors.

Vinegar

Use vinegar to remove blue stains and streaks that result from dishwashing detergent. In addition, vinegar is an excellent remedy for bacteria and germs.

• combine the same amount of water and vinegar;
• fill the tank with liquid;
• spray the composition on the plate;
• after 3 minutes, wipe the surface with a clean cloth.

ammonia

Use ammonia-anise drops on alcohol. They effectively remove traces of burnt milk and quickly cope with the main enemy of glass ceramics - salty drops. Prepare a miracle - the solution is simple.

1. Take 250 ml of pure water.
2. 50 ml of ammonia.
3. Mix the ingredients and pour into a spray bottle.
4. Spray the mixture over the hob.
5. After 10 minutes, rub the glass ceramic with a dry cloth.

When starting to clean the cooking surface, do not forget about the existing prohibitions, neglecting which can harm the appliance.

1. Do not heat the burners in the hope of easier and faster removal of burnt-on pieces of food. Wait for the panel to cool completely, otherwise there is a high probability of cracks or scratches.
2. When cleaning, do not use tools that are not designed to scrape dirt off the hob. Forget about knives, brushes and metal scrapers.
3. Do not allow the hot top layer to interact with the plastic. Traces of this material cannot be removed.

The service life of a glass-ceramic plate depends on compliance with the rules for its operation. Only in this way a faithful assistant will delight you for many years.

• to clean the stove negative consequences, do not use metal washcloths and compositions with abrasive particles;
• use a special scraper and;
• put the stove in order not once from once, but regularly. For example, every week;
• for cooking, use high-quality utensils. So, a curved bottom can cause damage to the top layer of the plate.

What exactly you will use to ensure that the stove remains as stylish and functional as the day you bought it is up to you and your wallet. Most importantly, the remedy must be safe and effective.

Video: how to clean the glass-ceramic surface of the stove from grease?

Additional questions

How to clean an electric stove?

Electric stoves, as a rule, are covered with enamel, the care of which is reduced to the use of a special paste, gel or creams. Elimination of contaminants with any composition in the form of a powder can cause irreparable damage to the enamel layer.

On sale there is an inexpensive, but effective composition for stoves - "Cif".

1. Wait until the hob has cooled down.
2. Apply to sponge.
3. Lightly moisturize it.
4. Apply the substance to the electric stove.
5. Wait until the active components of the composition have an effect on the pollution. This usually takes 2 hours.
6. At this time, remove the burners, remove the grate.
7. Place them in water with detergent.
8. If necessary, apply the substance to the inside of the oven.
9. If there are heavy dirt and pieces of food in the oven, place a container of water in it and turn it on at 80 degrees.
10. After half an hour, all the dirt will peel off with the steam of water, which will accelerate its further elimination.
11. After 2 hours, use a wet cloth to wipe off the detergent composition from the surface of the stove and its elements.

How to clean a stainless steel stove?

Stainless steel gas stoves come in spirit types:

• mirror;
• matte.

The approach to cleaning and maintenance depends on the type of unit. Modern stores for household needs offer a variety of products for cleaning various cooking surfaces.

If you choose the right tool, the appearance of the device will delight with beauty for many years.

1. So, in order to effectively clean your assistant, use products in the form of a cream, gel of a liquid consistency.
2. Additionally, use rags and sponges of a delicate structure.
3. Carefully free the surface of the stove from crumbs.
4. To do this, use a soft sponge.
5. Next, using warm water, soak the hardened dirt.
6. Moving your hand and sponge in the same direction, pick up what gets wet.
7. Sprinkle a cleaning agent on a rag and rub the stove, applying more diligence in problem areas.
8. Take a clean raw material and remove any remaining foam.
9. To polish the surface, apply a special tool.
10. Dry the top layer with a paper towel.

How to clean cast iron grates gas stove?

In careful and regular care also needs a cast-iron grate from a gas stove. Of course, washing it quickly is unlikely to succeed, but following our recommendations, you can do it.

• turn on all burners. Fire will ignite the product perfectly. At the same time, turn on the hood, open the windows. This will provide access to fresh air;
• next, wash off all the dirt from the cast iron;
• wash the grate.

If you have a car, use engine washer fluid. The substance perfectly removes carbon deposits and grease from cast iron products. At the end of the procedure, it is enough to rinse the grate with water and dry it.

If the size of the grate does not allow it to be placed in a liquid, use the Anti-Fat tool. The composition of the substance effectively affects the pollution in ovens.

1. Apply water to the rods.
2. Lubricate generously with the composition.
3. After 20 minutes, remove dirt with a metal brush.
4. Rinse with clean water.

How to clean an induction hob?

Timely cleaning induction cooker, will allow you to effectively use its functionality throughout for long years. To do this, always have at hand:

• soft cloths;
• sponges;
• paper napkins;
• composition for dishes;
• special cleaner for induction hob.

To quickly bring the appearance of the plate in order, it is enough to use a detergent and a sponge.

1. Apply a few drops of the product to the sponge.
2. Rub over the surface of the hob.
3. Remove foam with clean water.
4. Use a tissue to make the surface shine.

Yes, you should do it every day. Once a week, use special products for glass ceramics. The substance forms a film that protects the surface from the appearance of new contaminants and their easy removal. Rinse thoroughly after application. The interaction of chemistry with a heated plate is the cause of damage to the glass-ceramic panel. Don't forget to polish the stove with a soft, dry cloth.