How to recognize a glossy monitor or matte. Glossy or matte laptop screen - which is better? Which screen is better to choose for working with text and numbers

Alexander Dragun, Ph.D., site expert

In the world over time, many things begin to be perceived completely differently. So, in ancient times, silk stretched under the ceiling was the privilege of very rich people. Today, the installation of a stretch ceiling in an apartment by the vast majority of the population, judging by the reviews on the forums, is identified with poverty. And it's weird. Glossy surface ceiling visually expands the space, matte is not striking, creates a feeling of comfort and home warmth - no guest will determine that it is made of stretched film or fabric, unless otherwise stated. Both types of ceilings fit perfectly into any style of decoration, from classic to high-tech. In these conditions, it is important to understand, stretch ceilings - glossy or matte - which is better?

When planning the finishing of the upper part of the apartment, it is important to determine which stretch ceiling to choose - matte or glossy? Each of them has its own advantages and disadvantages. Each of them is good in a certain situation. If this were not the case, then either a glossy or matte ceiling would leave the construction market because of its lack of demand.

Glossy stretch ceilings

Tastes could not be discussed. Therefore, many apartment owners do not pay attention to the objective characteristics of each type of ceiling. I like matte - they will mount it. Glossy shines beautifully - it is in all rooms.

However, there are objective criteria that dictate a specific choice for a particular room: difficulties in operation, technical characteristics, degree of implementation design solutions, possibility additional solutions in interior design.

Based on these requirements, consider the pros and cons of glossy ceilings. We immediately note that in a comparative analysis big role the material from which the ceiling sheet is made plays: glossy - only from PVC film, matte - polyester (synthetic fabric), as well as PVC (in practice it is not very common).

  • high strength - withstands 100 liters of water per 10 m 2 during a flood from above;
  • moisture resistance - can be used in rooms with high humidity;
  • long service life (more than 10 years), during which the material does not lose its technical and aesthetic characteristics;
  • a rich palette - more than 100 colors and shades, as a result of which the interior is given a stylish and very effective look;
  • the ability to visually increase the space due to the reflection of the ceiling surface of 95% of the incident light - the effect of a "mirror" or, as professionals say, "second floor";
  • easy to clean - easy to clean (it is strictly forbidden to use detergents, only a damp cloth - stains from special equipment are very difficult to remove);
  • does not require frequent cleaning- dust and soot do not stick well to a very smooth surface;
  • allows you to implement almost any idea of ​​​​designers - the options for the night sky look especially fantastic.

There is a glossy stretch ceiling and cons:

  • afraid of temperature changes - at a temperature of 0 degrees, it loses elasticity and becomes brittle;
  • has a web width of 1.2 to 5 m, and therefore is welded with a special apparatus, and a 0.2 mm thick seam, with a close look, can always be seen, especially on light-colored ceilings (specialists have learned how to mask the seam by connecting films of different colors) ;
  • the pattern is not visible - it is blurred and glare, in connection with which only one-color coloring is used;
  • reflects at night street light, which requires tightly drawn curtains in the evening and at night - glare from lanterns and headlights of cars irritates the human psyche;
  • requires careful care - it is easy to cut or pierce during washing, it is subject to repair, but traces will remain visible, even after decorative inserts - only a replacement;
  • thin material - easily damaged - it even got to the point that, to prove the strength of their products, many manufacturers write that their ceilings cannot be pierced, for example, with a champagne cork;
  • heats up and loses its shape powerful lamps- simple light bulbs with a power of more than 60W are not recommended to be used at a distance of up to 20 cm (this statement does not apply to LED lamps).

Matt stretch ceilings

When choosing matte ceilings, the landlord should know that this type of panel has:

  • long service life;
  • solid, without seams, surface - rolls of material have a width of 5 m;
  • ability to tolerate negative temperatures;
  • any kind and type of drawing looks good, from photo printing to 3D drawing - visibility in any light is excellent;
  • natural look - imitates a very expensive color;
  • high density - the risk of damage during care is much less, although here it should be washed carefully;
  • clear color reproduction - it does not glare and is not distorted under various types lighting;
  • the ability to emphasize all the advantages of shiny furniture;
  • detergent resistance and high temperature, which allows the use of all types of lighting fixtures;
  • good compatibility with moldings of the ceiling space.

One more important dignity matte ceilings - they do not create emotional overstrain due to various glare (a working TV, headlights of passing cars, etc.).

Among the minuses it should be noted:

  • rapid contamination, which is facilitated by the porous structure of polyester;
  • the same porous structure complicates the washing process - it has to without fail use a soft brush and detergents.

Comparison

Based on the above positive and negative properties both types of stretch ceiling, it is difficult to make a choice in favor of one of them. Therefore, we will spend comparative analysis according to the price factor, the visibility of the seam and the complexity of care.

What is cheaper

A glossy ceiling has a significant price advantage - PVC film is 2-3 times cheaper than fabric, and for some of its types - 7-10 times cheaper, but these are branded materials. The difference will have a rather significant impact on the family budget (2,000 - 3,000 rubles per room). Conclusion: price factor plays a significant role for the population with average incomes.

Where the seams are more noticeable

In practice, this indicator greatly affects the choice of the type of ceiling. Matte ceilings do not have a seam at all - the material does not stick together (therefore, it is produced in a width of 5-6.1 m), for a film it is only 0.2 mm thick. Becomes noticeable in certain lighting and only with light colors of the ceiling. The material is leather, velvet, etc. the seam is almost invisible. For those who want to eliminate the risk of a visible seam, there are two options:

  • make the ceiling multi-level or combined, for example, with drywall;
  • mask the seam with adhesive film of different colors.

Conclusion: it is possible to avoid a visible seam, so neither gloss nor matte canvas has an advantage.

What is easier to wash

A shiny ceiling is less likely to collect dirt, but it is better visible on the gloss and it is more difficult to wash it off - only with a damp cloth without the use of detergents. At a polyester stretch ceiling, dust and soot accumulate faster, but they are practically invisible. At the same time, you can wash the ceiling with the help of "chemistry". It is difficult to give an advantage in this situation to any type of canvas.

What to choose and why

Choose from the above analysis a specific type of stretch ceiling for an apartment - difficult task. It is greatly simplified if ceiling covering for a specific room - here minor details begin to come to the fore.

To the kitchen

Glossy or matte stretch ceiling in the kitchen? Here the issue is solved simply because of an insignificant, at first glance, trifle - PVC film resists water and its vapors well. Therefore, in the kitchen, with its high humidity, there is only a glossy ceiling. Choice of colors, types of lighting, etc. - the task of the designer or the taste of the owners of the apartment. There is one more nuance here - such a ceiling is easier to clean.

To the bedroom

For the bedroom, polyester ceilings are needed, that is, matte. The reason is that the gloss reflects light from the street onto the bed and, consequently, onto the face, which makes it difficult to sleep. The use of heavy curtains partially solves the problem - it removes the light reflected from the street, but blinds the eyes with light from a sconce, chandelier, or other lamp.

If there is a great desire to still make a gloss in the bedroom in order to see everything as in a mirror, it is better to invite yourself to visit the apartment where such a ceiling is mounted and see with your own eyes the effect created by the PVC film.

In the bathroom

Which stretch ceiling in the bathroom - matte or glossy? The answer is obvious - glossy. There are two points here:

  • The bathroom is a small room. A shiny ceiling will expand it visually.
  • High humidity is contraindicated for fabric, so only a glossy ceiling.

To the living room

You can make a ceiling in the living room from any kind of canvas. It all depends on the interior design. There are many solutions here. Where exactly to stop, the owners must decide in accordance with their tastes and preferences.

To the nursery

In the children's room, a glossy ceiling is possible only in the form of the night sky. All other types of it will interfere with sleep, and also scare. Matte ceiling, also with a pattern, - perfect option for this room.

When choosing the type of canvas for a stretch ceiling, it is advisable to follow the advice of professional craftsmen:

  • choose more dense material- the risk of damage during installation and maintenance is reduced;
  • light colors visually make any room taller and wider;
  • in the hallway, a white glossy ceiling looks good, as well as beige and bleached peach colors;
  • in the corridor, the gloss of cold tones creates a negative perception of the room;
  • when constructing a two-level structure, the gloss should be in the center, and matte canvas- along the edges;
  • matte ceilings are ideally perceived with spot lighting.

Conclusion

Each type of compared material can be characterized by three key words:

  • PVC film: economical, beautiful, durable.
  • Fabric (polyester): stylish, expensive, durable.

If after reading the material it is still not clear which is better - matte or glossy ceilings, then the exit to combined combination material. The simultaneous use of glossy and matte elements is becoming a hit of the latest design ideas creating true masterpieces. Such ceilings can be made both in 2 levels, and in the form of a curved shape in one level. The use of two types of materials removes all restrictions on the use various types lamps.

When buying a laptop, you should immediately pay attention to its display. Laptops come in glossy and matte finishes. Therefore, having decided on the capabilities of the laptop and its display diagonal, do not lose sight of the screen cover itself.

Of course, when choosing a laptop in a store, the sales assistant usually asks for what purpose you are choosing a laptop computer, and will be able to tell you which version of the laptop screen is more suitable (matte or glossy).

However, it doesn't hurt to know what the difference is. In fairness, it is worth noting that sometimes users themselves do not know whether they need a matte or glossy screen and which is better to buy a laptop. In most cases, for a modern user, this is not important.

Matte or glossy - what's the difference?

When choosing a laptop for yourself, first of all, you need to decide on your goals. If you plan to use your laptop mainly as a multimedia portable entertainment center, then it makes sense to buy laptop with glossy screen. On such a screen there will be a more saturated and juicy image with excellent brightness indicators. To work with video and graphic editors, a laptop with a glossy screen finish is also ideal. But there is one minor disadvantage of a screen with a glossy finish - it's glare. Compensation for this inconvenience will be a large supply of brightness in combination with a wide range of shades.

Matte screen finish well suited for those who need a laptop primarily for working with numbers and text documents. On a laptop with a matte screen, eyes do not get tired so quickly when working in front of the monitor for a long time. Unlike glossy screen, the matte finish of the display will not please you with juicy and bright image, but when bright light hits the screen, there will be no glare and the image will remain well readable.

Here, perhaps, are all the main differences between a matte screen and a display with a glossy finish. It is quite difficult to judge which screen coverage is better, because everyone chooses the most suitable for themselves. If you will be using your laptop more often in a dimly lit room, a laptop with a glossy screen will do. And in the case of using a laptop with a more frequent hit sunlight Of course, you should choose a laptop with a matte screen finish. We hope that this article will help you make the right choice when buying a laptop.

When it comes to home improvement, every little thing counts. For example, choosing as the finish of the ceiling space stretch fabric, the question arises as to its texture. And here opinions are contradictory, because each type of material differs in its perception and has certain influence to the interior of the room.

Let's study the issue in more detail in order to understand which ceiling is better - matte or glossy.



Peculiarities

The stretch ceiling is a structure made of a frame and a special material, which is evenly stretched over it and fixed with special fasteners. This design is today the focus of interior design, as it allows without extra hassle to make the ceiling elegant, taking into account any whims of the customer.

A distinctive feature of this design is the adjustment of the design to the nuances of the ceiling of a particular room. In other words, systems stretch ceilings unlimited in variability and complexity of design. They allow the frame to be made taking into account protrusions, openings for columns and hoods without harming the panel itself and the quality of its tension.



All existing varieties can be roughly divided into two types: pvc film and textiles. In addition, each type is divided into separate categories. The film is nothing but synthetic material predominantly 3.5 m wide, it is distinguished by high operational characteristics and is divided into canvases with a matte and glossy texture. Each type of this material has its advantages and disadvantages, however, in most cases, such varieties involve suture technology.

Textile varieties are also divided into two types of raw materials, one of which is matter with a matte structure. The second is characterized by the presence of a silk sheen, but it cannot be called glossy.

This material is distinguished by a large width (5 m), which makes it possible to exclude suture technology in the design of the structure.



Advantages and disadvantages

To understand what is the difference between stretch ceilings and different texture material, we will make a small comparison, studying the effect of perception, advantages and disadvantages. Note that both varieties are inherent in evenness and smoothness. The design data for correct installation do not have sagging and folds, thanks to which they look aesthetically attractive.

In addition, due to the texture of the material, they are able to decorate different rooms home, whether it be a bedroom, living room, children's room, office or home library. If you approach the design creatively, through any ceiling you can decorate ceiling space entrance hall, corridor, attic, bay window and even a loggia, making the room visually more spacious.



Other advantages of any structures include the composition of the material with special impregnations, due to which the materials are not afraid of moisture and during operation exclude the formation of condensate. This allows them to be used in rooms with high humidity. Due to this feature, some homeowners decorate the ceilings of bathrooms and combined bathrooms with these materials.

Another convenience is the fact that when installing you can choose the height of the structure yourself. This allows you to beat the height difference of the ceiling and make it even relative to the floor.



In addition, the advantages can be called relatively quick installation and acceptable cost. With regards to installation, it can be done in just a day. And installation is not required pre-training surfaces, which saves family budget on putty, primer, as well as calling a specialist from outside. An added bonus when installing is low interest dirt and dust, which are usually formed during the installation of other structures.

The materials used for the stretch fabric are unlimited in the choice of shade. Modern technologies allow the execution of a special pattern on the material of any texture - photo printing, due to which you can beat any visual effect or bring a special mood to the interior of a particular room. As for the tones of the material, they are all muted and are selected in such a way as to emphasize the high status of the interior.

Often in the designs of matte and glossy stretch ceilings, you can see a harmonious mixture of colors, when the design involves the use of two delicate shades.



However, with a number of advantages, both systems share several disadvantages. suspended structure regardless of the type of material hides a few centimeters of height. This is not always acceptable for rooms with low walls. From this small rooms seem tiny.

Other disadvantages include the susceptibility of the material to mechanical damage. If you accidentally pierce or mechanically touch the material sharp object, you can violate its integrity. If the scratches are not so terrible yet, it will not be possible to restore the punctures. In this case, you will have to replace the panel with a new one. Now let's look at how each type of material differs by studying the nuances of ceilings.




Glossy

Glossy ceilings have the effect of increasing space. Due to the texture of the surface, they make more room in which they are installed. This effect is especially appropriate in modern areas of interior design, which is important to show the gloss and elegance of any material. If there are elements with gloss in the interior composition, this ceiling covering will be quite appropriate.

However, the effect cannot be called simple. If photo printing is applied on such material, the perception of the ceiling changes, and far from being better side. It will be difficult to appreciate the expressiveness of the lines of the pattern here, since the gloss will prevent this.

Therefore, in choosing a pattern, it is worth giving preference to simple motives. And it would be even better if the decor of such a canvas is backlighting, molding, baguette or other cornice.




Not to mention the influence mirror effect to perception. Such a ceiling looks stylish, but the surface reflects everything that is below. Wherein the darker the tone of the material is selected, the more expressive the mirror effect will be. And here another question arises: the ceiling will double the amount of furniture in a particular room, which is fraught with a visual effect of disorder and a loss of design style.

To avoid negative perception, it is worth reducing the number of interior details. This will fill the room with air and lightness. The partial inclusion of gloss in the design of the ceiling allows you to bring an unobtrusive organization to any room, clearly delineating a separate functional area of ​​\u200b\u200bthe space. For example, gloss can be used to denote dining area, select a section of the cooking zone, accentuate the dressing area in the hallway. It makes sense to choose warm shade: cold tones of gloss make the room uncomfortable.



Matte

Such structures are characterized by the absence of any shine. The the effect allows you to apply a stretch fabric in any interior style without exception regardless of whether these are classic trends, modern, ethnic, ecological or vintage. Such a texture looks better than others in a creative style, since, without interrupting attention, it is able to emphasize the uniqueness of constructive additions (for example, false beams or imitation of communication systems). The glossy texture has limited such possibilities.

The matte type of texture does not make the design conservative: the designers emphasize what exactly these designs are able to convey special status the owners of the house, hinting at their well-being and fine taste. Such a canvas is harmoniously combined with a glossy material, but it is it that allows you to see every line of the picture, if any. This feature allows you to use given material for realistic designs with 3D effect for open sky, window openings, space motifs and twinkling night stars.



matte texture does not create emotional tension due to the reflective surface, therefore promotes a relaxing atmosphere. Unlike a glossy canvas, matte material is easy to care for and does not show stains after cleaning the surface. In addition, pollution is less noticeable on it, which cannot be said about glossy counterparts.

If you choose a material with a satin or rough texture for decoration, the interior will look especially luxurious. However, this texture is more difficult to care for, because in most cases it does not provide wet cleaning, it is usually vacuumed.


Computers, smartphones, tablets have firmly entered life modern humanity. Though work, even at home, but a person spends most of his time at the screen of a computer or laptop. The natural desire of anyone at the same time will be to preserve their eyesight and protect it as much as possible from the negative radiation that any monitor and screen generates.

What does a person want from a monitor or tablet screen? It must accurately reproduce colors, have no dead pixels and have a sufficient viewing angle. Good brightness will not hurt, so that there are no glare on the screen in the sun.

A good monitor should not create problems, especially for the eyes.

Most of the debate today revolves around several topics related to screens and vision:

  • which screen is better - gloss or matte?
  • Should I install anti-reflective film?

In dealing with these issues, many consumers forget that 90% of the quality of a good screen is the matrix. Therefore, the first question that should worry every consumer is which matrix to choose?

How does the quality of the matrix affect the laptop screen?

Main a sign of a good matrix directly for vision is the viewing angle. After determining the matrix, the following questions of convenience are already coming up, for some it is more convenient to work with a matte monitor, for others with a glossy one.

AT total, there are three groups of matrices:

Liquid crystal matrix (TN) one of the cheapest and available matrices. She responds quickly, but her viewing angle leaves much to be desired. And yes, it distorts the colors a bit. Because for the view is not the most the best way, but its cheapness does its job.

The picture below clearly shows the viewing angle of the TN matrix and the IPS matrix. After that, there are no unnecessary questions about which laptop screen is better.

The best in terms of viewing angle and color quality is an IPS matrix. Based on it, LED monitors, etc. have already begun to develop. For vision, such matrices are the best, but they are also the most expensive. They are always used in professional monitors and screens. AT difficult conditions such a matrix has better readability. Bright light, sunny color do not distort the image.

The example below shows how much juicier and better colors on an IPS matrix. When working with such a laptop, the eyes will get tired much less.

Monitor with MDV-matrix has collected the advantages of the two previous matrices- he took the color reproduction from IPS, and the response speed from the TN + Film matrix. But such a matrix is ​​not as dynamic as others. Perfect for artists and photographers who care about accurate color reproduction.

A very detailed classification of matrices is described at the following link - matrix classes.

Gloss or matte - what do the eyes vote for?

It does not matter what the user owns, a tablet or laptop, whether he has a computer installed. The debate about which is better is still going on. At first glance, the matte surface of the screen seems more comfortable and pleasing to the human eye.

Matte virtues

Unlike a glossy surface, matte, first of all, does not glare in the sun. Since a laptop, like a tablet, a person can constantly carry with him, then his work on the street can be unlimited. A glossy surface in the bright sun is an extra way to spoil not only your eyesight, but also your nerves.

But besides the reflection, there is also color reproduction and brightness. And right here matte screen is starting to lose ground. If a laptop, like a tablet, has to be used everywhere, then you can choose a matte screen. Moreover, the laptop cover can always be adjusted to obtain the desired viewing angle.

The matrix is ​​of great importance. If it is TN, then it is better to choose a glossy version. If IPS, then the matte screen will be the most comfortable for the eyes. Especially if the user often works with numbers and documents. The matte screen will strain your eyes less during many hours of such work.

glossy beauty

People are weak, and very often, when choosing a laptop, a person is guided not by common sense, but by beauty. And it is very good if beauty implies quality. In the case of glossy screens, only a good matrix can guarantee the quality of the screen.

The image on such screens seems brighter and more saturated, which seems to help the eyes rest more. But with such reflectivity, the screen with its glare is very tiring for the eyes. Moreover, on such a screen you can see every drop, mote, which also interferes with the eyes.

On the street with such a laptop or tablet is a complete torment. You need to look for a shadow, twist the lid of the laptop. From the sun glare, the eyes begin to hurt even more. With a good IPS matrix, this effect is slightly less, but it is not completely excluded.

True, in a room with ordinary electric lighting (and not behind the back of a person sitting behind a screen!) The viewing angle of such screens is much larger than that of matte ones. Yes, and the black color here is more accurate and deep..

For clarity, further on the link, very good test the work of both types of screens on films, graphics and office applications - the battle of screens.

Anti-glare coating - saving and protecting the eyes?

Very often they sell laptops and tablets with an anti-glare coating already installed. But there are also anti-reflective films that are relevant not only for tablets. Is it worth it to spend money on buying a laptop with such a built-in option, or is it better to buy a film?

Below is an example of a peeling anti-reflective coating. And this is his main problem. It quickly becomes unusable, moreover, few of the users wonder how to properly care for it. And then the monitor screen looks very impartial.

Anti-reflective films are much cheaper. And since for the same tablet any user will buy protective film, then it makes no sense to buy a tablet with such a coating. It is better to buy a film with such a coating. The task of the coating or film is to protect the screen from glare when it hits it. sun rays or bright electric light. And the cover really helps. But the film beats him in this sense. It is much more comfortable for the eyes to work with such a film.

The coating is very quickly torn, cut and spoils the entire look of the laptop screen. Therefore, when buying glossy laptop, it is better to immediately buy a protective anti-reflective film in the kit, it is more reliable and more convenient. Although over time, dust will begin to clog under it and it will have to be changed. Although the film makes the screen a little dimmer, it is also protective at the same time.

Protective anti-glare film

You can read about how to remove a spoiled coating from a laptop screen.

So that the user should always approach the choice consciously and familiarize himself with the topic at least minimally. And it doesn't matter what he will choose - a screen and a matrix or a tablet. The health of his eyes depends on this.

Today you can't imagine modern world no internet or computer. Everyone has this technology in their home. However, in order to use the computer comfortably, it is important to choose the right monitor. At the moment, there are such types of coatings as glossy and matte. Which is better - we will consider in our today's article.

Features of glossy monitors

Key Feature are more intense and bright colours. The black tint is especially pronounced on such monitors. What to choose - matte or glossy monitor? Glossy monitors have high color reproduction.

But I must say that when using such a screen, glare and various reflections can be noticeable. This puts a lot of stress on the eyes. Among other disadvantages are pronounced fingerprints and dust marks, so care for such a coating should be frequent.

Features of matte monitors

With the same design, the LCD panels are distinguished by a special anti-reflective coating. This is what prevents reflection. Thanks to this coating, you can work with a computer under any conditions. Eye strain will be minimal. But at the same time, such monitors are characterized by poor color reproduction. They are more dull and faded. Therefore, it will not work here to get the maximum pleasure from watching movies or playing games, especially during daylight hours.

Operating conditions

If you are buying a monitor for your home computer, you need to think about the lighting in the room. From this characteristic it is already possible to decide which monitor is better - glossy or matte. If the room is not too bright, you should give preference to glossy panels with rich colors. However, if you're planning to work in a brightly lit room, or if you're looking for a monitor for the office, a matte screen is a better choice.

Please note: even a matte screen is not 100 percent anti-glare. But their number will be much less. Matte coating makes glare less harsh. They blur as much as possible.

To comfortably work with a glossy monitor, you should remove open light sources. These are floor, wall lamps, as well as chandeliers. Some are wondering how to make a glossy monitor matte. You can polish the surface, but experts do not recommend doing this. Yes, significantly reduced throughput, the picture becomes blurry. Therefore, you should decide in advance on what kind of monitor coating should be - glossy or matte.

Anti-glare film

It is impossible to predict all the conditions in which we will work. So, the situation may change the very next day after the acquisition of the monitor. And suddenly there is a need for matte finish. You can make it on a glossy monitor by sticking an anti-reflective film. But you need to understand that it is not as effective as a coating on a matte LCD. Therefore, to get full protection from glare will not work.

It is very easy to stick such a film:

  • At the first stage, you should make sure that it fully matches the size of the monitor (you need to remember that not only the diagonal is important, but also the aspect ratio).
  • Next, you need to degrease the surface. The presence of dust and other dirt is excluded. Otherwise, after gluing on the screen, these defects will be significantly visible.
  • Then the film is glued from one corner to the opposite and gently smoothed.

Is a glossy finish good?

If you work with graphic objects, such monitors artificially increase the contrast. As a result, the image is more saturated and brighter. Also, the glossy monitor is great for watching movies, surfing the Internet and playing games. Such a monitor is no less relevant when working with graphic editors. In addition, these screens require less electricity. In view of this, such screens are often used on laptops.

Choosing a screen for working with texts

Which is better - glossy or matte If you are planning to buy a monitor for work, comfort for the eyes and the ability to use the screen in any conditions come first. Experts recommend giving preference to matte screens. Yes, unlike glossy, there will not be a bright and saturated picture here. However, bright light that hits the monitor will not cause glare. This makes it easier to work with text and numbers. The image will always remain well readable.

But if you need a monitor to work with images, it is better to give preference to glossy solutions. At the same time, it is important to organize workplace so that glare is eliminated as much as possible. It is better to operate with such a monitor in dim lighting.

Specifications

Here are the characteristics of a glossy monitor using the Dell S2316H as an example:

  • The screen diagonal is 23 inches.
  • Matrix response time - 6 ms.
  • Display brightness - 250 candelas per square meter.
  • Contrast - 1000:1.
  • Horizontal viewing angle - 178 degrees.
  • Display resolution (maximum) - 1920 by 1080 pixels.
  • The pixel size is 0.26 by 0.26 millimeters.
  • Maximum amount flowers - 16 million.
  • Illumination type - LED.
  • Rated power - 23 V (0.3 in standby mode).

Below are the specifications matte monitor Dell R2417N:

  • The diagonal of the monitor is 23.8 inches.
  • Matrix reaction time (from gray to gray) - 6 ms.
  • Brightness - 250 candela per square meter.
  • Dynamic contrast ratio - 4 million to one (nominal - 1000:1).
  • Viewing angle (vertical and horizontal) - 178 degrees.
  • The pixel size is 0.27 by 0.27 millimeters.
  • The number of colors is 16.7 million.
  • Rated power - 19 V, standby - 0.3 V.

As you can see, the specifications of these monitors are quite similar. Therefore, many cannot decide which is better - a matte or glossy monitor. Next, we will summarize all of the above.

Summing up

Which is better - matte or glossy monitor? First, let's highlight the advantages and disadvantages of glossy solutions. Among the advantages it is worth highlighting:

  • High color rendering.
  • Bright and saturated colors.
  • Pronounced black color.
  • Suitability for working with graphic objects, as well as for watching movies.

Among the disadvantages:

  • Surface contamination is visible.
  • There are glare when exposed to sunlight.
  • Eyes get tired faster.

Now let's highlight the advantages of matte screens:

  • The presence of an anti-reflective coating.
  • Less eye fatigue.
  • Suitable for working with texts and numbers.

Among the cons:

  • Less responsive in games.
  • Faded and dull colors.
  • Graininess (mostly relevant for cheap options).

So, which is better - a matte or glossy monitor? As you can see, both have their pros and cons. If you need a monitor for gaming, watching movies, working with images, glossy solutions should be preferred. Matte will be relevant when working with texts (therefore, such screens are widely used in offices) and undemanding to lighting, since glare is invisible.

Fitting © 2022 Design and interior of apartments