What are Isotex panels and where are they used? Finishing wall panels isotex (isotex) Convenient panels for wall cladding
are Finnish panels made on the basis of natural heat and sound insulating ISOPLAAT boards(Isoplat) 12 mm thick. ISOTEX wall panels (IZOTEKS) are covered with high-quality wallpaper or linen fabric, ISOTEX ceiling panels (IZOTEKS) are covered with foil paper.
Finishing panels ISOTEX (ISOTEX) environmentally friendly and hypoallergenic, because are made of wood without the addition of glue and other chemical binders, while they are strong, flexible and resilient.
The tenon-groove connection provides perfect alignment walls. Installation on "liquid nails" or a stapler to the crate. Final result and appearance the interior will not depend on the professionalism of the master, because to carry out the repair and decoration of the room, it is enough just to apply glue around the perimeter of the panel and press it against the wall. Wall panels ISOTEX close 1.5 sq. meters of the wall and weigh only 4 kg, which means that even a fragile woman can do repairs in an apartment with her own hands.
Due to the porous structure, decorative panels ISOTEX (Isotex) have unique heat-insulating, sound-absorbing and acoustic properties (lack of "echo effect"). Soundproof panels ISOTEX (Isotex) are not afraid of changes in temperature and humidity, are difficult to ignite. Due to its versatility and acceptable design panels of this type have been widely used in Finland and Sweden for more than 50 years, not so much for office decoration, but for apartments and seasonal houses.
Design:
Now 4 types of wall panels ISOTEX (ISOTEX) with a textile coating are produced:
Panels with vinyl coated also have their own advantages. Them decorative coating durable, and when dirty, it can be washed with any household detergent.
ISOTEX panels of the Decor series (Decor) have a vinyl coating with the texture of Venetian plaster:
Panels with the texture of textile wallpaper series Interior (Interior):
Panels with wood texture Mali (Mali), Atrium (Atrium), Timber series (Timber):
Mali 19T timber 32 Timber 33 Trium 65
Ceiling panels
Ceiling panelsISOTEX (ISOTEX) four types are produced. Each species has a relief pattern light tone. Panels Alaska (Alaska) have the texture of a plaster surface, panels Gold (Gold) and Silver (Silver) mimic the surface of wood. Decorative panels Nordic (Nordic) imitate the reverse, as it were, “depressed” wood texture.
WHY ISOTEX?
- Natural and safe
- Comfortable
- economical
- Easy to install
NATURAL AND SAFE DECORATIVE PANELS
Quality raw materials are used wood chips from local coniferous trees. The fibrous mass obtained as a result of grinding wood chips is diluted with water,
pressed into slabs ISOPLAAT (ISOPLAT) and dries up.
In the manufacture of fiberboards, no adhesives or other chemicals are used: the binder is contained in softwood natural resins. For facing tiles ISOPLAT only use adhesives water based. The plate retains all the qualities inherent in wood - strength, elasticity and warmth. Panels ISOTEX (Isotex) are recognized by The Building Information Foundation RTS as a building material corresponding to class M1 (best class).
COMFORTABLE!
Using panels ISOTEX (Isotex) there is an opportunity to quickly solve a complex of issues at once: to carry out repairs in an apartment or interior decoration in country house, make walls warmer to the touch (like a carpet on the wall) and improve sound insulation. For a children's room and bedroom or where they listen to music, one more property of the panels will be especially useful: they are quite high acoustic properties. Everyone knows very well how much the sound spreads around the apartment when there are only naked people in the room. painted walls reflecting a sound wave (the so-called echo effect).
Panels ISOTEX (Isotex) can be installed directly on old surface walls and ceilings without leveling them - ...minor surface defects do not interfere with the installation and will be hidden by the panels. It is necessary to make a crate only with significant unevenness of the walls. Installation is simple and quick and does not require special tools. ISOTEX panels with wallpaper easy to clean. If desired, the panels can be painted with latex paint.
ECONOMIC
Light weight (ceiling panels weigh 1.5 kg, Wall panels- 4 kg) and ease of installation allow you to solve a complex of issues (sound insulation, putty and wallpapering) yourself and in the shortest possible time, limiting the total costs only to the cost of panels and glue.
APPLICATION
Ceiling and wall trim panels ISOTEX offer various solutions, as for fashionable interior, and for a rustic-style home.
Decorative panels ISOTEX (Isotex) keep stable internal temperature indoors - warm or cool, according to need, and, at the same time, are the key to ensuring natural air exchange in the building.
All vinyl coated panels are easy to clean and do not fade. for washing panels ISOTEX (Isotex) suitable for all household detergents. If necessary, wall or ceiling panels can be repainted (using only water-based paints), or delete and replace with new ones. If you want to remove the joints, they can be putty. Textile-coated decorative panels can optionally be varnished (using only water-based varnishes), which ensures a clean surface and makes them easier to clean and maintain.
EASY INSTALLATION
Finishing panels ISOTEX (Isotex) They are easy and quick to install and can be installed on any surface in a dry room.
ISOTEX panels (Isotex) are natural, "breathable" building material, so it is necessary to place them in an open package in the room where the finishing will be done 24 hours before work, so that the humidity of the panels is aligned with the humidity of the surrounding air.
If the ceiling or walls are made of wood, gypsum boards or concrete without significant curvature, then install decorative panels ISOTEX (Isotex) can be directly onto old surfaces with glue and staples.
Sheathing is required only during installation decorative panels on uneven concrete or stone
surfaces. In case of installation of a crate, it is possible to hide the electrical wiring under the finishing panels of the panel ISOTEX (Isotex). It is also necessary to take into account the squareness of the corners of the walls and ceiling, in order to avoid an oblique slope of the last row finishing panels.INSTALLATION OF CEILING PANELS
Installation on the crate:
For the crate, wooden planks measuring 19 x 44 mm should be used. planks
must be installed at intervals of 300 mm (measured between the central parts of the slats). Ceiling panels should be fastened with brackets (clip length 10-14 mm) to the crate, making sure that the gaps between the brackets do not exceed 100 mm. Fasten the edge ceiling panel to the grid with nails, screws or glue so that the wall sheets and skirting boards installed later completely cover them.
Ceiling panels ISOTEX (Isotex) should always be installed along the crate. For achievement best result longitudinal seams should be installed in the direction of incidence of light.
Glue mounting:
Apply glue strips to the back side of the panel at a distance of about 30 mm from the edges, and in the center of the panel
- drops of glue every 200 mm. Press the panel against the wall a little away from the adjacent panel and slide it laterally so that the adhesive surface is evened out. If possible, the stability of the ceiling panels can be reinforced with brackets.Always follow the instructions different manufacturers glue!
INSTALLATION OF WALL PANELS
WALL PANELS WITH PAPER COATING
Mounting on the crate:
For the crate, wooden planks measuring 19x44 mm should be used. The slats must be installed at 290 mm intervals (measured between the central parts of the slats). Wall panels should be fastened with brackets (the length of the brackets is 10-14 mm) on the crate, making sure that the gaps between the brackets are at least 100 mm.
Glue mounting:
Apply glue strips on the back side of the panel at a distance of about 20 mm from the edges, and in the center of the panel - drops of glue every 200 mm. Press the trim panel against the wall slightly away from the adjacent panel and slide it laterally so that the adhesive surface evens out.
WALL PANELS WITH TEXTILE COATING
Glue mounting:
Install planks measuring 19x44 mm at intervals of 300 mm (measured between the central parts of the planks). In the case of a flat wall, the panels can be fixed to the wall without a crate. Apply glue strips on the back side of the panel at a distance of about 20 mm from the edges, and in the center of the panel - drops of glue every 200 mm. Press the panel against the wall slightly away from the adjacent panel and slide it sideways so that the adhesive surface is level and the panel is attached to the wall without support.
Properly installed ceiling or wall panels ISOTEX (Isotex) have long term services, and also protect walls and ceilings from the formation of cracks, which often form on walls and ceilings when using other materials.
EcoTrade offers you to purchase environmentally friendly modern materials. Construction Materials, presented in our catalog, allows you to make repairs in the room most efficiently, while spending the minimum amount of money.
We offer you to purchase high quality decor isotex wall panels used for wall decoration. They are represented by sheets of material measuring 580x2700mm.
ISOTEX wall panels, which you can purchase from us, are used to decorate walls made of concrete, brick, wood, etc. It does not require additional alignment and decoration.
Our company offers the following:
- Highly big choice. You can verify this by reviewing our catalog;
- Our wall panels are available in low prices. You can verify this by comparing offers for similar products presented by other companies. Prices for wall isotex panels start from 5678 rubles per pack;
- Very advanced logistics. We carry out delivery to many regions of Russia, presenting our customers with the most optimal conditions.
Advantages of ISOTEX wall panels
Natural wall panels IZOTEX, presented by our company, have the following advantages:
- Natural and high safety. Wood chips crushed to a fibrous structure are used as feedstock. The plate is formed by pressing the raw material with the preliminary addition of water to its composition. The bonding of the fibers is carried out due to the release of their natural substance lignin, and not by the addition of glue or other chemicals;
- Convenience. Using wall panels, you can solve several problems at once: repair, interior decoration, sound insulation, insulation;
- Ease of installation. Due to the tongue-and-groove system, the installation of the panels is quick and very simple. You can install them on almost any surface. Sheathing may be required if the walls are too curved or you plan to lay wiring behind them;
- No need for post-processing. After installation of wall panels, there is no need for subsequent plastering of the walls.
ISOTEX wall panels range
The base of the panels can be decorated with textiles or vinyl wallpaper. At the same time, the designers thought out the drawing in such a way that there was no need for its docking.
- With textile cover. This coating is pleasant to the touch and looks very beautiful. In addition, in combination with fiberboard, excellent acoustic properties of the material are provided. There are 4 series of wall panels with textile coating: pernau, tiffany, silky, linen;
- Vinyl coated. Such a coating has high durability and practicality. When dirt appears, such panels are easy to clean;
- With the texture of a plastered wall;
- With the texture of textile wallpaper;
- With wood texture.
Our managers will help you choose the most suitable option wall panels presented in our catalog.
The cost of wall panels IZOTEKS
Our company offers ISOTEX wall panels at the most favorable prices corresponding to the product quality. The cost of panels depends on the type of decor. If you compare the prices presented in our catalog with the prices in the catalogs of other companies, then you will be convinced that they are the most affordable with us.
We approach all our clients individually, in addition, we have a flexible system of discounts. That is why ISOTEX wall panels can be afforded by individuals, and not just large companies.
/ What are Isotex panels and where are they used?
What are Isotex panels and where are they used?
Many, when renovating their home, want to improve the design, make the house more comfortable and convenient. For this, new Decoration Materials and technology. One of these innovations is isotex panels, which have appeared relatively recently.
What is it
To have a complete picture of something, you need to know exactly what it is and what it is used for. Regarding the products of this company, many may think that these are the most ordinary panels, only made from some kind of “special” fiberboard, and because of this, they are sold more expensive.
But this is not at all the case - for all the products of this company, not only the appearance is good, they also have additional interesting qualities.
Decorative panels are made in order to solve several problems at the same time - to improve the sound insulation of the room, keep it warm and give it a beautiful look.
Such slats can be used when decorating walls and ceilings. Each surface has its own variety. They differ primarily in their size. For the ceiling, such products will have dimensions of 1800x300 millimeters, and wall panels can have dimensions from 2550 millimeters in length to 2700, while the width of the panel will be 580 millimeters.
These dimensions may change if the coating of the part is not made of paper, but of textiles. There are also such options. Then the width of the ceiling part will increase, and will be equal to 600 millimeters.
The thickness of such products is the same for walls and ceilings - 12 millimeters, and are interconnected, all parts using a spike-groove system.
At the same time, the ceiling parts have grooves and protrusions on all four sides, while the wall elements have only two. This will allow you to connect two wall pieces, just like lining.
What are they made of
For the manufacture of such design details, the familiar to all fiberboard is used. But, it's not just fiberboard sheets, but specially processed material.
In the manufacturing process, no chemical glue is used, but resin is used, natural origin. This makes the product very environmentally friendly.
On the outside such products are covered with a decorative coating. In general, each such detail is a kind of sandwich. The first layer is a firming paper cover, then - the basis of fiberboard, after - foil paper, giving texture and color front side details.
In appearance, they can be completely different - the palette of colors and textures is very rich. Depending on the selected outer coating- textiles or paper, this list may change.
Advantages
Each kind decorative finishes, has its pros and cons. You can argue about the minuses for a very long time, but, for all panel coverings, the list will be approximately the same. Therefore, there is no need to consider separately the cons.
But about positive qualities, which distinguish exactly the isotex panels, it is worth talking separately, since some of these properties are unique.
First of all, this is an opportunity to get heat saving in addition to a beautiful appearance. This is an important part of comfort. This finish helps to keep the heat in the house. Of course, using such design elements as insulation is pointless, but adding another barrier to prevent heat leakage is a great opportunity.
Noise isolation is also very important. These products have a sound absorption coefficient of 23 decibels, which is a lot. A room finished with isotex will become noticeably more comfortable acoustically.
Fire safety is always important. And here the products are also at their best - a foil surface, which is applied to both wall and ceiling slats isotex, does not allow them to burn. All products manufactured under the Isotex brand are fireproof and do not support combustion.
Due to the fact that during the manufacture, the parts are treated with resin, they are not too susceptible to the effects of humid air.
One of notable benefits it is isotex products that will ensure that when working with them, a large mountain of garbage is not formed. Especially if the installation is done with glue. There will be a few scraps left that are easy to dispose of.
How to mount such parts
An important advantage over other methods of interior decoration is the ability to mount isotex ceiling panels, simply with glue. If the base on which they will be glued is sufficiently even, installation will take only a couple of hours.
The ceiling for such installation should be without significant irregularities, and cracks and other defects in the ceiling, like small shells, will perfectly hide behind a glued canvas of such planks.
For gluing, you can use ordinary "liquid nails" designed for heavy decorative elements. This will allow you to quickly fix all the details on the ceiling surface.
In addition, glue is still needed - to fix the last detail in the coating. Then there will be no gaps and gaps between the coating and the walls.
In other cases, both ceiling and wall panels of isotex are mounted on. It can be made in the form of a crate of wooden or plastic slats, or you can assemble the base from metal profiles.
On the assembled frame, isotex panels, can be attached with clamps, as in the photo below, or use a construction stapler. Sometimes, special glue is used for heavy products.
Given that the wall parts are made specifically for the size ordinary wall- 2.5 meters or 2.7 meters, they are mounted very easily. In addition, their weight is only 4 kilograms, which will allow you to mount the parts alone.
The isotex ceiling panels can be attached with a stapler, as in the photo below, but you can also use self-tapping screws. The easiest way is to mount them using clamps specially designed for such products.
The weight here will have more greater value than when decorating the walls, but, here, the Izotex company took care of everything - the weight of the ceiling parts does not exceed one and a half kilograms, and you can also mount them without helpers.
All finishing takes several hours or a couple of days, depending on the scale of the repair.
Conclusion
Despite the slightly higher cost than standard products, such slats can be an excellent solution for decorating any room. They are environmentally friendly, which means they do not emit harmful substances, retain heat, improve room acoustics and are simply beautiful.
Using these panels, you can solve many problems at the same time, and get a very high-quality result, in a very short time.
Decorative panels ISOTEX(Isotex) - completely environmentally friendly pure material, which does not contain chemicals and binders. The raw material for the panels is wood. conifers, as binder component- natural resin. During the manufacturing process, wood is crushed and mixed with water, and the resulting wood fiber mass is pressed. Next, the array is cut into slabs and a decorative coating is glued. Moreover, the glue for this is used on a water basis - without formaldehyde.
Advantages of ISOTEX decorative panels
Wall panels have a range of useful features, which makes their use expedient not only from the point of view of comfort, but also from the point of view of material gain. ISOTEX panels are:
- Excellent thermal insulation. Panels consisting mainly of air do not allow heat to pass through, leaving it in the room. Due to this, heat loss from the house or separate room through walls can be lowered at times.
- Soundproofing. The structure of the panels absorbs sound. It seems to get stuck in the plate material and does not pass to the other side. In addition, the sound that hits the walls from the room is also muffled, which almost completely eliminates the echo effect.
- Safety. There is nothing in the panel but wood and air. No glue, no formaldehyde, no other substances that could harm people's health. This allows the material to be used even by people suffering from asthma or allergies.
- Simplicity and high speed installation.
- Vapor permeability, which allows the walls to breathe, freely passing moisture.
- Long service life, which is several decades.
ISOTEX wall panels board dimensions
Wall panels ISOTEX material texture
Wall decorative panels ISOTEX with a top coat of paper wallpaper or linen fabric are produced in the following sizes: 2550x580x12mm / 2550x600x12mm / 2700x580x12 mm / 2700x600x12mm.
Installation of ISOTEX decorative panels
Panels on both sides have a tenon-groove connection. Panels can be fixed with a stapler, liquid nails or water-based glue.
The panels can be stapled directly to the base or to a wooden crate (if necessary, leveling the walls). The crate is made of wooden bars with a section of 19x44 mm in increments of 290 mm. Fasten ISOTEX panels with staples, maintaining a distance of 100 mm between staples.
When fastening liquid nails or glue mortar mixture applied along the perimeter, retreating from the edge of 20mm and dotted in the center with a step of 200mm. After applying the adhesive, the panel is installed and pressed against the wall, then it is necessary to move it towards the adjacent panel, providing reliable connection"thorn-groove".
Decorative wall plate - perfect solution for finishing the walls of private houses, city apartments or office space any area.
ISOTEX wall panel design
Decorative panels can be decorated with linen or covered with a layer of wallpaper. Due to different monitor colors, colors may vary slightly from those shown.
Panels decorated with linen fabric
Panels decorated with wallpaper
Atrium 65
Concrete 11
Concrete 12
Decor 42
Decor 44
Decor 45
Interior 50
Interior 51
Interior 52
Interior 53
Luxor 71