Shoe shelves. How to make a shoe rack (shoe rack) with your own hands

A hanger, a nightstand for shoes, a mirror - acquaintance with the apartment begins with them. Home-made interior elements look especially interesting. Today we will tell you how to make a shoe rack.

Types of cabinets for shoes - signs of an ideal shoe rack

You can design an original shoe cabinet or use open sources. The second option will allow you to avoid mistakes and acquire necessary experience. A shoe rack in the hallway can be a simple two-row shelf or a carved chest with an advanced ventilation system. Today, on thematic sites, you can find a drawing of any furniture for shoes in the hallway.

Popular models include:

Open shoe rack;
Closed shelf - bedside table;
Tall narrow or elongated wardrobe - "slim";
Standard shoe box, combined with a mirror and a nightstand;
Dryer. There are models with natural ventilation and equipped with ultraviolet lamps;
Open or closed shoe rack (in demand among owners of large shoe collections);
Shoe cabinet.

You can make any shoe rack from this list. But how to do it right? Here are the signs of impeccable furniture for shoes:

Ergonomics. The closet should be comfortable;
Versatility. It is desirable that the shoe rack can be used as a stool or bedside table. If desired, you can install a mirror - you get a homemade dressing table;
Ventilation. Of course, it is not necessary to extend the air duct system, install the supply and exhaust units. Provide air circulation. This will be enough;
Design. Furniture should not be "knocked out" of general style apartments. However, this nuance is decided at the design stage.

With due diligence and care, any person familiar with electrical and hand tool. The main thing is to believe in yourself.

Basic model - open rack for drying shoes

It is not our task to create another masterpiece for the Hermitage. This shoe will appeal to people who appreciate practical solutions no frills. This product is based on a classic dish dryer. Don't smile - it's comfortable and functional. You will see for yourself.

Such furniture fits well into the interior of the apartment, decorated in a minimalist style. By the way, it is very popular with apartment owners and professional designers.

In a house where pets live, light glass or plastic doors should be hung on the rack. They won't stop the shoes from drying out, but they will save them from becoming a puppy's toy or a kitten's bed.

A beautiful comfortable shoe rack is a matter of legitimate pride for the master. However, several nuances must be taken into account. The characteristics of furniture depend on materials, fittings and tools. To a greater extent, the durability of the product is affected by the material.

The shoe dryer is made from furniture panels- you can buy them at construction stores.Along with the materials, do not forget to purchase accessories:

Furniture metal corner - 8 pcs.;
self-tapping screws;
Tsargi;
Hinges for doors - 4 pcs.;
Metal mesh shelf (quantity and size depend on your needs);
Handles (choose according to your preferences).

The set of tools for work includes: tape measure, marker, screwdriver ( hand drill), screwdriver, Sander(sandpaper), hacksaw or electric jigsaw, hammer and pliers.

After preparation, the cabinet for shoes is assembled in a few hours:

1. Having drilled the sides of the future shoe rack, fix the sides, ends, which also need to be drilled, with confirmations on it. With a depth of 5.5–6 cm, the diameter of the holes should be 5 mm, in the sidewalls 8 mm, but they must match;
2. Screw half of the corners to the cover of the product, the rest of the shoe racks fixed on the back wall will act as wall fasteners;
3. All elements of the product are interconnected by self-tapping screws. When assembling, check the geometry of the furniture - the diagonals must be the same;
4. On the facade of the rack-dryer, make markings under furniture hinges and hang doors.

The distance between the wire shelves should be at least 0.3 meters - you can put boots on the bottom. However, for do-it-yourself furniture, sizes do not have crucial A: The dimensions of the product depend on your desire. Shelves for shoes metal mesh will be more convenient if they are installed at a slight angle.

Wooden shelf for shoes - convenient simplicity

Later, we will definitely impress friends and family with creativity, but for now we are learning. One of the simplest options for furniture for storing shoes - wooden shelves. By the way, among the aesthetic inhabitants, such products are called the fashionable word "slim". But for us, this is an ordinary cabinet with, elongated in height.

For work, we need a standard set of tools described above, a rail, furniture metal corners and several boards 15–20 mm thick. Two of them are the future sidewalls of the shoe rack, the rest will act as shelves. The height and width of the boards depends on the size of your hallway and the number of shoes. Products with a height of 90 cm and a width of 60-70 cm are considered standard.

Steps for making storage for shoes:

1. With the help of a tape measure and a marker, cut lines are outlined. We need two side racks and several shelves (the number depends on your desire);
2. After marking, we cut the boards into segments right size. Rough edges can be corrected with sandpaper or grinder;
3. We fasten the corners to the future shelves with self-tapping screws, after which we fasten them to the sidewalls;
4. A rail will be needed to ennoble the front of the wooden rack.

On the final stage the product can be coated with a layer of varnish or acrylic paint. In fact, this furniture is the basis of most shoe racks. Let's prove it with an example. The next product is a two-section nightstand for shoes.

Shoe rack upgraded to a shoe rack

The master determines the dimensions and material of furniture based on his own needs. Can be used in production MDF boards, chipboard, wood, plywood. The latter option is durable, however, at the last stage it will have to be treated with varnish or paint.

Our future shoe rack will have the following dimensions: width - 1100 mm, height -700 mm, depth -250 mm. You can change them according to your needs. We will use plywood as the main material. To create furniture for shoes, we need the following parts:

Lid and bottom. Two identical boards 1100 long and 250 mm deep;
Sidewalls - 3 pcs. (two external, one central). Dimensions: height - 668 mm, depth - 250 mm;
Horizontal shelves - 2 pcs. (526x250 mm);
Frontal facades - 4 pcs. (311x518 mm);
The back wall (696x1096 mm), for its manufacture, you can use plywood or plastic a few millimeters thick.

The dimensions of the parts are indicated with the necessary indents and gaps for cutting and edging.

Accessories and consumables that cannot be made at home:

Plastic sandwiches (overshoes) for side racks - 4 sets;
Handles - 4 pcs. (by the number of sections), self-tapping screws, confirmations, corners, minifixes, adhesive tape or wood glue.

Add an awl, drills and confirmation bits to the standard tools and you can start assembling.

At the first stage, a box is assembled from the side racks, the lid and the bottom. Minifixes are used as fasteners. The next step is to install two internal shelves(fasteners - corners or minifixes).

In principle, there is nothing complicated in assembling such a product. By by and large, this is a slightly modernized shoe rack. But with the installation of galoshes you will have to tinker. However, this process is described in the accompanying documentation. But just in case, here are the drawings:

Work is done in the following sequence:

1. Markup;
2. Fixing shoe cabinets on the side racks. Make sure that her movement is not hindered;
3. Installation of plywood parts. Plywood plates are inserted into the grooves of the shoe cabinet, after which they are fixed with self-tapping screws or spikes.
4. We fasten the back wall;
5. We hang the front doors and fasten the handles to them:
6. The final stage is the processing of furniture with paints and varnishes.

Important! The dimensions of the parts are indicated with the necessary indents and gaps for sawing and edging.

The greatest difficulty in last version is the installation of a shoebox. However, the drawings and diagrams attached to it will make your work easier. By the way, if you just hang the doors, you get a regular closed shoe rack.

How to do do-it-yourself shoe cabinet In the article we will consider the manufacturing steps.

Muddy spring and autumn, dusty summer, winter, which makes special demands on uniforms - and now several pairs of shoes do not have enough space in the corner of the corridor.

Why is it more practical to do it yourself

It is always easier for a non-professional to buy a shoe locker than to make it. However, there are a number of nuances:

First, the range of inexpensive shelves is often scarce.
Secondly, the sizes of shelves in stores do not correspond to a rational calculation. The foot of the average resident of the CIS is still much larger than the Chinese, who supply most of the inexpensive furniture, suggest.
In addition, the height of the shelves is almost always the same. This is not entirely logical, since in winter people wear boots with high tops.

It is better to have one shelf with a higher height or hooks on the sides of the shelf to adjust the height yourself depending on the season.

What to consider when choosing materials and components

Is it hard to do standard cabinet for shoes? The obvious answer is no, it's not difficult. It is necessary to take into account a number of nuances before completing the drawings, purchasing material and starting assembly.

Let's take a look at the most important details Your future shoe cabinet:

Note: buy one standard chipboard sheet and sawing it as a result turns out to be more expensive than ordering it in furniture store/ production exactly the number of parts and the dimensions that you provide in the drawings.

shelves do not have to be made of wood. Take a closer look at the type of shelves on the dish dryer. Lattice metal shelves - this is best option;
chipboard - a material that combines cheapness and functionality. Laminated sheets are sold in many furniture stores and small industries;
the back wall of the cabinet can be made of hardboard - pressed cardboard, which is often used in furniture production.

Designer's Notes

In order for the design of the locker to be practical, you need to take into account the features of storing shoes and correctly calculate the dimensions of the shelves:

the bottom of the cabinet should not be covered by anything, otherwise water will collect inside;
shoes need ventilation. This may be several holes in the sidewalls, if the cabinet is planned to be closed (with doors);
the depth of the shelves should correspond to the length of the box from the largest pair of shoes in the house.

How to calculate cabinet dimensions

Shoe cabinet sketch

Provided that the largest pair of shoes in the house is 42 sizes, i.e. 27 cm long, the shelf should have a “depth” with a margin - say, 28 cm.

Depending on the size of the shoes, the size must be varied. The large side of the shelf depends on the number of pairs of shoes that need to be put:

collect all the shoes that you plan to put in the locker and measure how much space it takes in a row;
consider the designed number of shelves (3 or 4);
put a small margin in the width of the shelf.

Chipboard thickness - 16 mm. Accordingly, the outer width of the cabinet will be 32 mm larger than the width of the shelf.

What will you need

It is worth noting that the dimensions below are calculated based on the fact that maximum size shoes - 42nd.

External dimensions of the cabinet: height - 1200 mm, length (depth) - 320 mm, and width - 900 mm. It is necessary to choose sizes so that they are close to the dimensions of standard parts that are in every furniture store.

In this case, the set necessary details is:

4 lattice or chipboard (to your taste) shelves 864 mm wide and 280 mm deep;
top cover standard size 900 by 320 mm;
side walls height 1184 (taking into account the thickness of the top cover of 16 mm, the height of the cabinet will be) and length (“depth”) 320 mm;
frames (small parts made of chipboard) with a height of 100 mm and a width of 868 mm for fastening the structure at the back and front, called drawers;

Helpful advice: a rope can be pulled over the last shelf in order to fasten the tops of the boots with the help of small clothespins: so they will not break.

figured facades (improvised doors) made of MDF with a height of 1195 mm and a width of 447 mm (2 doors plus a margin of 4 mm for easy opening);
fiberboard sheet 1195 mm high and 895 mm wide for manufacturing rear wall;
4 hinges for furniture;
2 door handles;
8 confirmations (5 by 70 mm). Confirmat - a special furniture screw for fastening cabinet elements;
self-tapping screws 16 by 4 mm - it is better to take with a margin, a few dozen;
adjustable shelf holders: 4 for each shelf.

Connection technology

The shoe cabinet is assembled in the following order:

Holes in the side walls for inserting confirmations must be made with a diameter of about 8 mm, and at the ends of the tsarg frames - with a diameter of 5 mm. Drilling depth - half the length of the furniture screw.
The rigidity of the locker will give metal corners. You will also need them if you are attaching finished structure to Wall.
Hinges for facades, corners, the back wall must be fixed with self-tapping screws.
Attach shelf holders, handles for facades and hang shelves.
You can put the locker on the floor so you can sit on it when you put on your shoes, but it's better to hang it up and find another use for the countertop.

Helpful advice: if everything is in order with ventilation, then it will be dry enough in the locker and you can also hide the Internet connection in it. Then a Wi-Fi router will stand on top of the tabletop.

What a great variety of shoes in stores and markets! The female half cannot resist without buying another pair of shoes for a new dress. For men, there is a choice of practical shoes and there are plenty of them too. How much inconvenience does shoes bring in the hallway? Where is all this stored at home?

The solution can be found in a furniture store, namely, buy a shoe rack or make it yourself.

Someone has a small apartment and narrow small hallway while others have a spacious home. Some live with adult children and grandchildren, while others live alone. Hallways, like families, are different, so typical pieces of furniture do not always fit a particular room. A comfortable shoe rack, created with your own hands, will help solve the problem of choice.

With it, your hallway will be transformed into a stylish and comfortable business card Houses.

How to choose the right one? To begin with, let's get acquainted with the types of furniture such as a shoe rack.

Shoe wardrobe.

It is very convenient in small rooms, as the doors move apart and can be combined with the main wardrobe for clothes.

Showcase rack with doors.

It can be placed along the entire wall, the size of the shelves is any, but the disadvantage of such a shoe rack is instability.

Slim-format cabinet.

This cabinet has hinged doors at an angle of 45-90 degrees. And the name speaks for itself. This type of furniture is "thin", the shoes will be placed on a slope.

High boots such as over the knee boots can be deformed on such shelves.

Kaloshnitsa.

More suitable for a balcony. Shoes on such shelves dry quickly, but storage is inconvenient.

Rack.

It is the simplest design, but unstable and unaesthetic for the hallway.

Wardrobe cabinet.

The most common and practical shoe.

Advantages:

With tenacity;
M leg functionality;
K compactness;
E aesthetic.

Closed shoes are suitable for people with pets. It will help protect shoes from all sorts of damage from pets.

For cabinets, you can make folding, sliding and regular doors. So it will take up little space. A shoe rack made of laminated chipboard will be durable and will not fail for a long time.

Wooden models are easy to make with your own hands, which saves the family budget.

Shelves and drawers in the closet can be made for any type and size of shoes. And from above it is possible to make a table or upholster it with a cloth, a shoe rack with a seat in the hallway will come out.

The seat replaces an ottoman or stool for easy dressing.

Types of materials that can be used for shoe racks:

Metal and wood make the cabinet heavier, shoes will not breathe in plastic. MDF is a good choice, but not cheap. Most suitable material shoe storage- Chipboard. Does not weigh down the shoe rack and is easy to assemble.

Today it is the most demanded material in the segment of furniture for shoes.

And so, let's stop at the cabinet cabinet made of chipboard.Of the tools we need:

Procurement of parts

Instructions for assembling a shoe rack with your own hands

Chipboard thickness + Planned shelf width + Half chipboard thickness.

For example, the detail is 12mm, the width of the shelf is 300. It turns out: 12+300+6=318mm.

We do this from the right and left edges. Transfer the drawing directly to inner side Chipboard and sign every detail where it will be located. Then, when assembling, you will not confuse anything.

When marking the holes for the height and width of the shelves, you need to take into account the back part, since from this side the entire view of the cabinet is located in the same plane.

Inside the shelves will be held on shelf supports. They need to drill holes. To calculate correct location these holes must be subtracted from the height of the rack each thickness of the partition and divided by the number of shelves.

To the result obtained, add the thickness of the shelf and half the diameter of the shelf support.

For example, the column height is 600 mm. There are two shelves planned. Shelf thickness 12 mm. Shelf support diameter 5mm.

The calculation procedure will be as follows:

600-12=588

588/2=294

294+12+2=308

Therefore, from the top you will need to measure 308 mm.

After the holes are drilled, you can put the shelf supports, filling them with glue and nailing them with a hammer.

Do-it-yourself shoe assembly according to the drawing

When all the holes are made, you can start assembling for confirmation. We attach the middle racks to the lower part, then the extreme ones. Make sure that there are no protrusions at the junctions of the corners.We attach the covers to the corners, put the shelves on the holders and install the finished boxes on the rails.

We attach furniture handles to the doors in any location. They can also be attached to awnings, or you can install sliding ones.

Decorating a handmade shoe rack can be varied.

Do-it-yourself furniture always distinguishes the interior from other apartments, where there are typical chests of drawers and wardrobes.

VIDEO: Do-it-yourself shoe cabinet.

Entering the dwelling, a person enters the hallway, which should be functional. Properly equipping it is not easy due to small size, but be sure to provide a place to store shoes. To do this, it is not necessary to purchase expensive furniture - you can make shelves for shoes in the hallway yourself. The lack of space forces the owners to choose multifunctional solutions. For example, a clothes hanger can be combined with a shoe rack.

Each owner wants his home to look perfect, and pieces of furniture to match and complement each other. To do this, from the huge variety of shoe stands that can be seen in the photo, you need to choose suitable option. The main requirements for them are multifunctionality and compactness.

Types of shelves

The choice of shelves depends on the number of shoes, the area and the style of the room. They should be simple and reliable, they are easy to do with your own hands. This is one-stop solution which saves space, has an attractive appearance. Shelves are placed at the bottom of the wall. An ordinary hanger from a row of hooks and a small shelf-bench, under which shoes for daily use are stored, will perfectly complement the interior. good decision is a rack, the upper part of which will become a bench. It is usually equipped open shelves(example - in the photo).

Outwardly, such shelves in the hallway resemble cabinets, but they do not have doors and often they also lack side walls. Drawers or doors are located under the seat, and next to it can be stylish hanger. The rack will allow you to put things in order, it is practical and universal option. Models with open and closed shelves in which shoes are placed on the entire sole.

Curbstone - slim with folding doors is suitable even for a very small hallway. Shoes will not gather dust, but they are put in the cabinet only dry and clean. open hanger with shelves and a seat is practical and convenient. It will fit clothes and shoes used every day. To store shoes not used in the current season, provide closed systems. Special coasters are obtained from ordinary cardboard boxes, they are pasted over with a material that does not get wet and covered with pebbles. Shoe shelves in the hallway they make horizontal, multi-tiered, vertical. By creating your own product design, you can make combined option, combining several types in one design.

Shelf materials

Exist great amount materials suitable for the manufacture of shelves and racks for shoes. Before starting work, consider the following:

budget for the manufacture of shelves;
the number of people who will use the shelves;
will it this model rack or shelves combined with a hanger;
whether a seat (bench) is required on top.

The following materials are used for the manufacture of shelves: metal, wood, plastic, etc. Narrow and corner models made from chipboard. Shelves of the simplest design are attached to the wall and take up a minimum of space. They look quite original and do not reduce the hallway space.

From natural wood make shoes for classic interiors. Wood is affordable and environmentally friendly pure material, it is easy to process.

A do-it-yourself metal shoe rack will provide natural ventilation. Her distinctive feature is that the metal will not absorb odors. This shelf can be decorated additional elements and add personality. Metal does not rot, does not get wet. If it is treated with an anti-corrosion compound, it will not rust. A metal shelf is usually mounted on a wall or mounted on racks.

How to make a shoe rack with your own hands

The easiest way is to make shoe racks with your own hands. For this you will need conventional tools and materials:

wooden bars - 6 pcs.;
self-tapping screws (3 mm - diameter, 25 mm - length);

Making a shelf for shoes with your own hands, you need to start with the manufacture of the side parts. To do this, prepare 6 identical bars 33 cm long (33 cm is the required depth, which will allow you to place shoes of any size on the future shelf). Then evenly distribute the 4 remaining bars on the workpiece and cut them to the desired depth.

The universal width of the shelf is at least 62 cm. It will allow you to place several pairs of shoes in one compartment at the same time. Each shelf is made of two blanks, which are attached to each other with self-tapping screws. After the end of all installation work sharp and rough parts of the shelves are sanded with special paper.

The height of the shoe rack, made with my own hands, will be approximately 80 cm. Its lower part is located at a distance of at least 25 cm from the floor, which will allow you to place boots and other types of high shoes.

Racks for shelves can be made from planks 80 cm long. Special cuts are made on them the size of a bar thickness (in this case, 16 mm), the distance between cuts should be 25 cm. The shelves are inserted into four prepared racks with pre-cut sections.

From the materials that remained after the preparation of the shelves and racks for them, they make upper part rack. To do this, 33 cm bars are ground, varnished and fastened with self-tapping screws to the finished structure.

Note! If 4 self-tapping screws are used for each shelf, then you will need only 2 self-tapping screws to secure the top part.

Remember that with your own hands you can create any design for storing shoes, whether it be a rack, cabinet or a regular one. hanging shelf on the wall. Enough can be found on the web. ready-made options, but if you have the time and desire - experiment. So you can get an exclusive piece of furniture that all guests will admire. All you need to create shoe shelves in the hallway with your own hands is a little imagination and basic consumables.

Practical and versatile products are very popular. We recommend opting for multifunctional models that can easily change their appearance. When choosing a shoe storage option, focus on your habits and the ease of use of the rack or shelves in your hallway. For example, for a large number shoes, you can choose a high rotating rack.

From the materials available in the house, which, for example, remained after the repair, it is quite simple to create original shelf or a shoe rack with your own hands. The wire hanger will become interesting way solving the problem of storing home shoes in a small hallway.

Often in small corridor special holders, hanging containers are installed. Hanging furniture will become great way placing shoes in small room. wall shelf will give the room extra volume and save space on the floor. We recommend hanging doors on the shelf to hide its contents. In this case, the room will look neater. If you place a multi-tiered structure along the wall, it will fit not only shoes b, but also, for example, umbrellas with bags.

The carousel shelf is assembled from several round parts. It provides a separate place for each pair of shoes.

Old wooden or metal staircase easily turns into convenient system storage. The ladder is very easy to attach to the wall. Additionally, it can be painted in the desired color, and hooks can be attached to the crossbars.

Stand-alone systems like the photo below can be used to sort shoes. Ordinary pallets, decorated with paintings or appliqués, will become reliable storage containers and decorate the interior of your hallway.

By connecting fantasy, it is enough just to create an original shelf for storing shoes, which is still long time will be admired by all households and guests.

Photo gallery (19 photos)

The passion of many women is shoes. How many pairs of shoes do you need different cases life? Shoes for business meeting, comfortable boots for walking, soft slippers. What then to say when it comes to a family where everyone needs boots or sneakers. Therefore, everyone faces the problem of its storage.

It is often difficult to install a capacious shelf in small hallway. Shelves and cabinets just don't fit the size of your narrow hallway.

In this case, you must contact the workshop for the manufacture of furniture to order. However, these services are more expensive. standard solutions factory production.

But you can solve the problem differently. Make a wardrobe with your own hands.

Shelves

Materials for making cabinets can serve chipboard and MDF, as well as plywood and natural wood.

It should be borne in mind that plywood and wood cost significantly more expensive than slabs Chipboard. But furniture made from these materials has greater strength and, in comparison with chipboard is better tolerates humid environments.

Chipboard and MDF boards, unlike wood, do not require additional processing.

The pressed structure of MDF makes the material quite durable. It is quite easy to work with this material. Consider also its weight. We recommend using MDF only as a facade.

Chipboard boards have a wide color range. Therefore, it will be quite easy to fit the cabinet into the interior of the hallway.

As an additional decor, you can order milling on the plate. This will make her unique.

Cabinet with own hands

Boombox for sneakers, sandals and boots and folding drawers.

In this article, we will consider the process of manufacturing a cabinet, the frame of which is made of 16 mm chipboard. Partitions completed from chipboard 10 mm.

Let's play on the layout of two colors. From dark alder we will make sidewalls, a roof, internal standing and bottom, and from light alder - facades.

You can give your drawings and they will cut chipboard for you in a store that has special equipment. And also it is possible to include gluing of an edge tape in the order.

But if you are limited in funds or want to train your skills, then you can do it yourself at home. But it must be borne in mind that without a specialized tool and certain skills, it will not be easy to avoid chips.

How to glue the edge yourself?

Edge happens paper and plastic.

To glue the edge at home, you need:

Apply special glue to the edge.
Heat the iron to maximum temperature.
Through a dense fabric, press the edge with slight pressure.
Remove glue residue.

Cabinet details

Parts made of wood-laminate plates 16 mm, dark alder color:

roof - 1100 × 250−1 piece .;
bottom - 1100 × 250 - 1 piece;
sidewall - 668 × 250-2 pieces .;
internal standing - 668 × 250−1 piece .;
inner horizontal flat piece of wood - 526 × 250-3 pieces.

Details from wood-laminate plates 16 mm, light alder color:

facade - 311 × 51 -4 pcs.

Parts made of wood-laminate plates 10 mm, color alder light:

internal partition of the shoe cabinet - 510 × 140-4 pcs.;
internal partition of the shoe cabinet - 510 × 135-4 pcs.;
internal partition of the shoe cabinet - 510 × 85140-4 pcs.

Detail fiberboard 3 mm, color beige:

rear wall - 696 × 1096 - 1 pc.

Accessories:

shoe cabinet - 192×287×85×16−4 set;
pen - 4 pcs.;
thrust bearing - 6 pcs.;
confirmations - 1 pack;
self-tapping screws - 1 pack.

How to assemble?

To assemble the frame, we need:

sidewall - 2 pcs.;
roof.

We tighten the frame with the help of komfirmats. To do this, you will need a screwdriver and a bit for confirmations.

The final step will be the installation of the rear wall of the fiberboard.

We install a galoshnitsa

Dimensions and measurements should always be done in advance. So that you can know in advance what sizes the final product will be.

We make markings for the attachment points of the axis of rotation and the pin of the stop. We fasten the mechanisms to the sidewalls. Mounting dimensions and drawings are shown below.

Each shoebox comes with a drawing and wiring diagram installation. According to the drawings, we make markings for fastening.

We fix the shoe cabinet to the sidewalls using self-tapping screws. Shoe cabinet must have free movement.

We connect parts made of chipboard 10 mm with plastic parts. We insert the elements of the shoebox into the grooves and sit on the screws to the left sidewall. Next, fasten to the vertical partition. Let's do the same on the reverse side.

The final stage is the installation of facades. We use double-sided tape for this.

Then we attach the handles to the facades and install thrust bearings.

A do-it-yourself cabinet will please the eye and delight with its functionality, and will make moving around the hallway more comfortable. Your slippers will always be in their place.

Fabric or cardboard organizer

Pretty handy and easy to carry.

Consider the case when the corridor is so small that there is no room for a bedside table at all. In this case, the organizer will come to the rescue. It can be purchased at the store, as well as do it yourself. The material for the manufacture of the organizer can be a fabric or a cardboard box.

If there is a closet with a suitable niche in the hallway, then organizers can be placed in it. Put them on top of each other and set by surprise. During the manufacturing process, we impregnate it 3 times with a water-repellent spray or a solution of water and PVA glue. Thus, our product will have greater rigidity.

Do-it-yourself cardboard shelf

This is the most a budget option shelves. And everything you need to make it can be found at home.

You will need:

cardboard;
ruler;
pencil;
PVA glue;
scissors or carpenter's knife;
stapler;
scotch.

The most budget option when necessary materials or no money.

Lay out a sheet of cardboard on the floor. We cut out rectangles 45 by 30 cm in size from it. We form triangles 30 cm high from cardboard. This is one cell of our shoebox. We connect them in a row. The edges must be sealed with tape to prevent the cardboard from tearing.

This is a great solution for country houses. The disadvantages of such a shelf are instability and low reliability. Therefore, it is better to put it in a niche.

You can also design an organizer made of thick paper or wood directly on the cabinet door.

Shoe rack on a cardboard cabinet door:

cut rectangles,
roll a pocket out of them,
insert them into each other
attach to cabinet door.

Wooden plank shelf:

Fasten a wooden plank to the cabinet door.
Insert your sneakers, sandals or sneakers into the gap between the cabinet and the plank.

Open option. Quite convenient to use.

You can also make an open version of the product from wooden planks or boxes. In such a shelf, the thing will dry well. But it will also collect dust.

You can combine items and create a shoe rack that is completely unique in design, which will not only collect all the shoes, but also become an adornment of your hallway. Use for own ideas you can the most common items: pipes, glass bottles.

So, you can see that there are many solutions on how to organize and store shoes even in the narrowest hallway. Decide what suits you best. Choose a shoe rack design with moving or static shelves.

Categories

Popular