Can a cast iron bath be painted? Painting the walls in the bathroom: tips for those who hold the brush for the second time in their lives. Painting bathtubs with acrylic or enamel: which is better

Sooner or later, any bath (even expensive and exclusive) loses its appeal. The fact is that for many years of active operation surface layer(i.e. enamel) thins out. As a result, ugly smudges, unaesthetic yellow or even red spots appear, as well as chips and roughness. Hygiene procedures taking in such a bathroom is at least unpleasant, so many people come to the conclusion that old bath needs to be replaced. However, buying new plumbing is an expensive pleasure, and besides, dismantling the old bath in 99% leads to damage. finishing materials. The ideal option is

How to paint a bathtub made of cast iron, tin or metal? The easiest way is to use spray enamel. A bathtub painted with high-quality enamel will again look chic and aesthetically pleasing!

How to paint a bath at home?

Is it possible to update plumbing that has lost its attractiveness? It should be said right away that painting a bathroom will require accuracy and careful processing, but if you follow the instructions, everyone can paint their own bath.

Do you want to know how to paint a bathtub at home and get an excellent result? In this case, you should purchase all necessary materials and carefully study the phased work plan.

For work you will need the following materials:

enamel;
primer;
special degreaser (traditional acetone can be used);
(preferably from natural fabric);
protective polyethylene film;
construction tape;
sandpaper;
dense mask;
detergent and clean sponges.

Bath preparation

Painting a bath with enamel is quite simple. To do this, prepare the surface for painting.

All surfaces to be painted should be thoroughly washed with detergent.
The bathtub needs to be dried.
Using need to remove upper layer old enamel. Particular attention is paid to damaged areas.

Bathroom preparation

Dust that remains after working with sandpaper is removed with clean, lint-free wipes. Definitely dry!
From the bath, you need to disconnect the drain and the overflow piping.
Taps, showers, etc. carefully covered with a dense film of polyethylene.
With the help of a film and adhesive tape, it is necessary to close all surfaces with which the bath comes into contact.

Surface priming:

priming the surface must be done with a brush;
after drying, the primer must also be treated with sandpaper;
dust is removed with lint-free dry wipes.

Spray paint application

The paint is applied in three layers. This is done with smooth movements at a distance of about 25-35 centimeters.
In places where there were stains, chips and drips, the paint should be applied in a thicker layer, carefully painting over all ugly places.
After applying each layer of paint, you need to wait about 30 minutes (for the top layer of enamel to dry).
After treatment, the bath can be used only after 2-3 days (until the paint is completely dry). Drying time depends on weather conditions and air temperature. Accordingly, the hotter the faster paint will dry.

Following these simple rules, everyone will be able to paint the bathtub with enamel and save on the purchase of new plumbing.

Why overpay when buying a bath, and do redecorating after dismantling and installing new plumbing, if you can renovate the bath with minimal effort?

How to paint a cast iron bath at home?

Cast iron bathtubs are painted just fine. By using the methods described above and following step by step instructions, you can paint a bathtub made of cast iron, metal or tin at home. It is desirable that the room in which the staining will be carried out is well ventilated. While working with aerosol without fail you must wear a mask and gloves. Aerosol enamel - Chemical substance which should not be inhaled. Protection will help to avoid unpleasant consequences with health.

Cast iron bathtubs a large number of advantages, they perfectly retain heat, so that the water does not cool for a very long time. Therefore, if your cast iron bath has lost its attractive appearance, do not rush to change it to a model from more modern materials. Enamel painting will help save the situation.

Paint selection

How to paint a bath at home? The choice of materials is very important! The result of the work directly depends on the accuracy of the application and, of course, on the quality of the paint used.

It should be said right away that there is no need to save excessively and buy cheap paint, which is neither reliable nor high quality. Otherwise, it will incur additional costs.

So what is the best paint to paint a bath? Experienced professionals who have practical experience, it is recommended to use enamel paint on epoxy based. This paint is produced in the form of an aerosol and has excellent characteristics. The manufacturer should also choose a well-known and reliable. Large companies value their reputation, so their products comply with all existing global requirements and standards.

Is it profitable to paint the bath yourself?

Perhaps you are also interested in the question: “How to paint a bath at home?”, But you doubt that this idea is worthwhile.

Painting a bathtub is several times cheaper than replacing it. This is not just savings, it is an opportunity to increase the life of any bathtub by at least one and a half times! Work on updating damaged plumbing does not take much time, but the result will surpass all expectations.

The bathtub, painted with a quality spray, looks like new! At the same time, the cost of enamel in an aerosol and other materials is relatively small. Especially when compared to the cost of a new one. modern bath. The benefits are obvious.

do not soak laundry in the bath;
do not leave water in the bath for long time;
do not use chemical detergents that can damage the enamel.

Any bath is subject to restoration! The main thing is to show patience, accuracy and use high-quality materials.

Coverage every year cast iron bath getting worse. It loses its luster and attractiveness. The surface itself in some places is covered with rust, becomes rough. Washing in such a cast-iron bath does not give any pleasure, and microcracks are clogged with dirt, from which you can get some kind of disease.

Changing a bath is quite expensive, so most owners decide to restore it instead of replacing it. Nowadays, home conditions allow you to paint the bath.

There are many different companies doing this kind of work. individual entrepreneurs. They restore bathtubs right at home, and always with high quality.

To paint the bath yourself at home, need to study the technology of this case and do everything in a strict sequence.

For painting, you must have special paint for cast iron bathtubs and hardener. You can paint a cast-iron structure only with it. Dilution of paint must be carried out exactly according to the attached instructions.

What paint is suitable for painting a cast iron bath?

When making a purchase of paint for a cast-iron bathtub, it is necessary to take into account the fact that it will come into contact with water every day. bathroom always has high humidity. Therefore, dyes should be selected taking into account such conditions. Paint is not suitable here, the color of which I really liked.

Such paint should not react to wet surface , it must have high adhesion. In other words, it must have excellent "adhesion" to the surface, otherwise the paint will begin to peel off quickly.

Sold in stores different kinds enamels. However, not all of them provide positive result. Enamel for a cast iron bath in the form of aerosol cans will last very little. Exactly one year later, the coating is destroyed.

To ensure that the new coating is of high quality and lasts long years, it is best to use multi-component polyurethane enamel.

For painting bathtubs, paints are considered the highest quality:

Dulux;
"Tikkurila";
Joby.

The cast-iron bathtub is painted in three layers. Each layer is applied with a new batch of paint. The hardening of the paint components after mixing is very fast. After two hours, it is no longer suitable for use. This must always be remembered. Therefore, a certain amount of paint must be prepared for each layer.

Before applying another coat of paint, the previous one needs to dry well and then degrease. All details of the technology of working with paint are described in the attached instructions.

Painting a cast iron bath at home

For painting, you can use acrylic paint or Stakryl enamel. After carrying out the preparatory work, this type of paint is poured onto the edges of the bath. She will drain herself, filling all the cracks.

This method of painting a cast-iron bathtub with acrylic is the most productive for home use. However, it has one serious drawback. The fact is that acrylic itself has poor adhesion to old paint. It is held in place by the rough surface and structural integrity of the old bathtub.

It is enough to slightly scratch the acrylic layer and the destruction of the layer will occur very quickly. Water will get into the cracks and begin to tear off the acrylic in whole layers.

To increase the durability of this surface and prevent the acrylic from breaking down quickly, need to paint the surface in several layers acrylic enamel. After all, if the thickness of the surface is increased, it will be very difficult to scratch the surface through and through.

Materials and tools

In order to color cast iron bath at home, you need to have the most different instruments, as well as related materials:

Painting technology

Special paint is sold in construction stores. Part of the most popular color palette several colors included:

White;
Pale green;
Light blue.

It is believed that after painting a cast-iron bathtub with colored enamel, it is much more difficult to see existing defects on the surface.

The paint kit includes a special hardener, which is mixed with it before starting work. Professionals recommend dividing the paint into three or four parts. Do not dilute the entire jar at once. This is due to the fact that enamel tends to harden quickly. It is better to dilute it in small portions.

First, the surface is degreased. Starting the restoration must be removed limescale and release work surface from the fat layer. For this purpose, active alkaline solutions are used.

At the second stage, the old enamel is removed. For this use grinder. Sometimes home craftsman, such a machine is not at hand, sandpaper will successfully replace it. The only drawback of working with sandpaper will be increased labor intensity and a large amount of time.

After cleaning, the old enamel is washed off with a strong jet of water. If, during rinsing, the treated surface began to become covered with drops, therefore, the degreasing process was done poorly. Will have to repeat it.

With the help of a hair dryer, a thorough drying of the bath is carried out.

To protect the work surface from microparticles, it must be well vacuumed.

When all preparatory work is completed, painting is carried out, a paint layer is applied. According to technological process, the paint should be applied from the edge of the rim to the bottom of the tub. The paint is applied in several layers. The bottom of the bathtub is painted last.

However, we must not forget that not every old bath recoverable. For example, if on the surface, except for yellow spots visible areas of cracked enamel, regular painting will not be able to properly solve the problem. You will need to replace the enamel layer, but it will last for a very short period.

It is clear that home conditions will not allow you to create a coating equivalent to the factory one. Therefore, you must always remember that such an operation of restoring the surface will have to be repeated every two to three years.

Of course, this job requires the right skills. But, if the bath was old, it will not be worse. try paint your own bathroom to everyone, whatever the end result, a useful experience will not be superfluous.

Each manufacturer in the arsenal has moisture-resistant paints, specialized, for wet rooms. Water-dispersion paints resistant to constant exposure to water are widely used. They do not wash for quite a long time, dry very quickly, do not have a strong smell.

Very important feature paintwork materials for the bathroom - this is the ability to vapor repellency. Pay attention to the composition so that it contains fungicides and algicides. They prevent mold or mildew from spreading.

An important point: so that subsequently cracks do not form on the painted walls, and the surface has a spectacular and attractive appearance, apply colorants to completely dry walls. Otherwise, condensation will form under the coating, which will lead to deterioration decorative properties coloring.

If you apply decorative plaster, then it is better to focus on those types that use wax or water-dispersion varnish - they will provide protection from water drops and from a humid environment.

A cast-iron bath is a symbol of the bygone Soviet era, when each apartment was equipped with this unpretentious, simple, but solid plumbing fixture. Some owners of "Stalinka" or "Khrushchev" still use old-style washing containers, as they are of high quality, strength, and durability.

The service life of a cast iron bath is at least 50 years, however, time, as well as active exploitation, leave their mark on its surface. Yellowing, chips, abrasions on the enamel spoil the appearance of the bowl, but it is irrational to change it because of these small defects, because in order to restore the whiteness of the product, you can simply paint it with your own hands. In this article we will tell you what bath paint is used at home, as well as how staining is done.

Defects in old cast iron bathtubs

The cast iron bath has an excellent operational characteristics, it retains heat for a long time, has sufficient strength. A feature of plumbing products made from this alloy is a large weight, which can reach 150 kg. Such a bowl can be used for more than 50 years, it will not lose its qualities, unlike modern acrylic and steel models. However, the service life enamel coating much less, even if careful care It has traces of heavy use.

Note! Even with analogues made of acrylic and steel, cast iron bathtubs are very popular because they have a long service life and durability. Replacing the old washing container with new model from the same material will cost the homeowner 15-20 thousand rubles. Paint for a cast-iron bath can restore whiteness and smoothness to a product 3-5 times cheaper if you work with your own hands.

Types of paints

It is logical to assume that painting at home is done with special paints. TO coloring compositions stringent requirements are imposed: they must tolerate constant contact with water, exposure to high and low temperatures, as well as potent detergents. In order to restore and restore the original appearance of the old bowl with your own hands, you need to choose a high-quality moisture-resistant paint that can be used to paint cast iron. Bath paint of this type comes in 2 varieties:

Important! The quality of staining directly depends on the correct preparation of the compound. The basis of the mixture has a viscous, thick consistency, and the hardener, on the contrary, is liquid. Therefore, in order to connect the components, it is necessary to mix them for a long time and thoroughly until a homogeneous fluid substance is formed.

Coloring technology

The process at home with your own hands cannot be called simple. The technology consists of the following steps: room preparation, surface preparation, compound preparation, paint application and drying. The most labor intensive operation is preparatory work because it takes a lot of time and effort. The quality and durability of the new coating depends on the correct surface preparation. Painting is carried out in the following sequence:

Experienced craftsmen say that the most important part of the technology for painting old cast iron bathtubs is drying. When the painting is completed, the bathroom is closed to prevent dust from entering. Polymerization of acrylic or epoxy enamel occurs 3-7 days, during which it is not recommended to use the bath. The first day it is better not to even go into the room. The more time passes from staining to the first wash, the more resistant the coating will turn out.

Video instruction

Over time, bathtub enamel wears out and tarnishes. It has small chips, scratches and cracks. The bowl is covered with reddish-brown rust spots. And then the question arises: how to paint the bath inside?

Recovery methods

IN currently The most common methods for updating cast iron baths are:

their enameling by hand or by spraying;
restoration of the coating by the method bulk bath", using liquid acrylic.

Note! The instruction strongly advises not to use ordinary oil, alkyd, nitro paints, as well as car enamels to update bathtubs. They have a relatively low resistance to moisture and an insufficient level of adhesion. Because of this, the coating will soon begin to bubble, crack and flake off.

Enamelling

The best option for enameling bathtubs is special two- and three-component paints based on epoxy resins.

The main manufacturers of coatings for cast iron sanitary ware:

the company "Dulux", its paint "Realife Bathroom & Kitchen" is most suitable for the bath;
German firm "Jobi" with "Wasch Fest" enamel;
the manufacturer from Finland "Tikkurila" offers the product "Reaflex / 50" for baths.

Before painting the bath, you need to consider the following points.

Before use two-component composition, the old enamel is cleaned, and then degreased.
Then inner surface baths are treated with a special primer. When it dries, you can begin the main work.

You can apply the paint with a soft brush or a roller with a soft bristle.
Thinking about how you can paint the inside of the bath, keep in mind that spraying enamel with a spray gun is the most reliable and convenient. It makes it possible to distribute paintwork materials evenly over the surface.

Note! Coating components should be mixed just prior to paint application. It is necessary to do this because the viability of the enamel is no more than 40 minutes.

Bulk bath method

When choosing how to paint an old bathtub, pay attention to liquid acrylic. This polymer has a beautiful gloss, good resistance to mechanical and chemical stress.

The most popular liquid acrylic, produced under the brand name "Stakril". It is a high-density two-component (hardener and base) enamel.

Also in demand is the Yaroslavl coating "Eco-bathroom" and the Moscow counterpart "Alfa-bath".

Coating Benefits

Acrylic bathtub covers have such advantages.

Their smoothness is higher than that of the factory enamel. This increases the resistance of the finish to various influences.
The low thermal conductivity of the polymer helps plumbing fixture 10 times longer to keep the temperature hot water. This makes bathing more comfortable.
Ease of maintenance. Acrylic coating can be wiped with a sponge dampened soapy water. Abrasive and aggressive chemical cleaners do not need to be used.
High strength, because acrylic enamel has a high degree of wear resistance.
With a coating thickness of about 6 centimeters, its complete hardening occurs in no more than four days.

Preparing the bowl

First you need to prepare the surface.

Below is the procedure.

If the coverage is only small scratches and yellowed areas, it will be enough to remove the top layer of the old enamel with a medium emery cloth.
When the protective layer has deep cracks, scratches, ingrained foci of corrosion, you will have to tinker. The coating in this case is removed with an electric drill with a nozzle in the form of an abrasive wheel.

Note! this work will cause a lot of dust to be released into the air. Therefore, wear a respirator or a protective mask.

Next, wash off all the dust and dirt remaining after grinding from the bath.
Degrease the surface with any solvent, such as white spirit. It can also be used for this baking soda. Dilute it to the state of gruel and wipe the bath with the composition. Then wash it off with warm water.
If the bowl has deep chips or cracks, cover them with automotive putty on epoxy resin. It dries almost instantly. You can work with a small rubber spatula.

The technology for updating bathtubs using liquid acrylic requires that the surface of the device be warm. Otherwise, the composition will not lie flat. For this purpose, fill the bowl for 5/7 minutes hot water. Then drain it.
Next, the bath should be dried very quickly using a highly absorbent, lint-free cloth.
At the last stage of preparation, remove the lower and upper drains so that the acrylic does not enter the sewer pipe. Cover the overflow hole with adhesive tape, and substitute a container under the bottom drain so that the remaining paint flows into it. Application of acrylic coating

Mix the base and enamel hardener according to the instructions provided. Pour part of the prepared composition into a working container, from which it will be convenient to distribute acrylic.
Pour a thin strip of enamel over the edge of the tub. If it has a plinth made of tiles, then use a spatula to guide the acrylic under its edges.

Pour the material in a gentle stream onto the edges of the rim, so that you get a layer of about 6 centimeters, and then flow down to about the center of the bowl.
Next, you should begin to move the stream along the side perimeter of the bath until the ring closes. Please note that it is highly undesirable to stop for a long time.

Note! In no case should you try to smooth out the resulting influxes and streaks. During the curing of the acrylic coating, they will disappear by themselves.

After completing the circle, fill the center of the bowl with enamel. Moving the jet in a spiral, spread the coating over the entire surface.
Excess material will gradually drain into the drain hole on its own.

This method is very economical and its cost is low. Including because it makes it possible to effectively restore the bath, instead of buying a new one.

A similar method can be used for other metal equipment in the bathroom. For example, before you paint a towel warmer in the bathroom, choose a special paint with great content(about 90%) zinc in the composition. This coating will effectively protect the device from corrosion.

When finished, wait for the coating to dry completely. The enamel hardening period ranges from 1 to 4 days. It depends on the specific type of liquid acrylic.

There are currently two such subspecies.

Fast drying coating. Applying similar material you will be able to use the bathroom within 24 hours. Such acrylic is suitable if you are in a hurry and you need to finish the work in a short time.
Long drying material. If you restore the bath with your own hands using such a composition, then it will be suitable for use after 4 days. It should be answered that this species Acrylic is more durable and reliable.

Conclusion

In this article, we looked at how you can paint the bath yourself. The best option for this is the use of liquid acrylic. At right order works and strict adherence to technology, you will be able to use the renovated bathroom for another 15/20 years. By watching the video in this article, you will increase your knowledge base.

Categories

Popular