How can you clean a gas stove. How to clean a gas stove at home. Remove detachable parts and protect hands

The stove is the main attribute of any kitchen. During the cooking process, there will definitely be some greasy spots on the surface of this plate, and it is not always possible to remove them immediately. Therefore, the question arises, how to clean the electric stove from soot and fat at home? How to clean electric stove? How is cleaning done? In this article, you will learn how to quickly cope with such a task with a minimum of effort.

How to wash stains and burnt spots?

launder gas stove from soot is actually not as difficult as it might seem at first glance. If pick up suitable means and act in a certain way, the entire plaque is easily cleaned off.

Important! Before you start cleaning your stove, take a realistic look at the condition of your kitchen. It may be better to immediately restore complete order, and not just wash individual surfaces. And in order not to spend the whole day on this process, read how to properly organize an effective one.

You will need:

soda ash 3 tbsp. l.;
any washing powder½ st. l.;
stationery glue (glass, not PVA) - 1 tbsp. l.

To use this tool:

Pour everything in 1 glass of cool water and shake.
Apply a thin layer of the mixture to the surface of your stove.
If the mixture turns out to be a little larger and powder crystals are visible on the surface of the plate, there is no need to be scared - this phenomenon is not critical, it can be left as it is.
In the process of washing, after 15-20 minutes of waiting, it is necessary to thoroughly moisten with water.

As a result, all the dirt will come off with the mixture without any effort on your part. You will also need information about if you don’t really like this method or it seems laborious, and in the future you plan to keep your house clean more regularly.

We clean the stove - what to consider?

In the room where the food is prepared, perfect cleanliness must be observed:

Soap splashes that appeared on the tiles near the sink, as well as wet spots on the surface of the desktop and the floor, are removed with the most elementary dishwashing detergents - there are no problems here.
As for the stove, burnt fat is not so easy to clean out. If no one has washed a very dirty stove for a long time, a huge layer of burnt fat will fill the entire space between the burners. That is why it is necessary to have suitable tools on hand to clean the stove from soot and grease at home.

Important! Since plates are made today from different materials and with different coatings

We wash grease from a metal plate

Increasingly popular in last years become hobs which are made of stainless steel. They look spectacular, inspire confidence with their solidity, which is how they differ from outdated enamel, as well as tempered glass. But the polished metal surface certainly requires special care, because absolutely all stains and splashes are quite clearly visible on it.

Important! Grease drops at home are easier to clean if they are still fresh, so the stove must be washed every evening:
if the fat is not burnt, an ordinary sponge is enough, as well as any dishwashing detergent;
you can also wipe the stove with a lemon slice - wait until lemon acid will be absorbed into the dirt for 15-20 minutes and wipe the metal surface with a clean sponge, there will be no more streaks.

When planning to restore complete order in the kitchen, take on board a selection useful tips from another article on our site that will help you.

Soap and soda solution

This tool corrodes grease perfectly, so you don’t have to rub the surface to clean the stove from soot and grease at home:

Mix a couple of tablespoons of baking soda with liquid soap. Add some water.
Apply the solution to the board surface.
Wait 15-20 minutes.
Wipe with a clean sponge.

Important! If you have a stove of stainless steel, please note that products containing:
chlorine;
acid;
abrasive particles.

Modern ways

Market household chemicals Offers a wide range of cleaning products metal plates. They are sold in containers with dispensers. The composition of these funds includes: surfactants, orthophosphates, titanium oxides and other caustic substances that perfectly destroy fat. Which brand to prefer - decide for yourself. At the same time, you can focus on the frequent choice of buyers: “Cilit”, “CIF”, “Shumanit”, “Topperr”, “Homestar”, “Sanitol”.

Important! If you haven't washed your stove in a long time, you can try a grill cleaner, which is used to clean ovens and cabinets in food service establishments. These products are incredibly caustic, so before using them in without fail wear gloves and protect your mucous membranes.

If you have a steam cleaner at your disposal, it will great option to clean the stove from soot and grease at home in just 5 minutes. Hot steam perfectly destroys all drips, as well as splashes of fat without any chemicals, and at the same time leaves no traces behind.

Many of these products will help you wash not only hob but also an oven. Read on to find out which ways to use to be able to cook delicious and delicious food again. healthy meals!

How to clean grease from glass and enamel hobs?

To wash enameled hobs, cleaning products that contain abrasives are not suitable. Any particulate matter they will simply scratch the enamel and, thereby, spoil its appearance. For this simple reason, the use of metal brushes is also unacceptable. It is allowed to wash the enamel only with a soft sponge with creamy cleaning agents.

Most likely, the walls are also strewn with frozen drops of oil. In an effort to bring the condition of your kitchen to the ideal, use our tips!

How to clean the stove in the kitchen from fat, if the fat is old?

Old fat on the stove is a real misfortune, since peeling it off the surface can also damage the material of the stove itself. Therefore, in this case, it is necessary to use effective, but at the same time, delicate means. Options may be as follows.

Method 1

Baking soda, in combination with other products available in every home, can help you clean the stove of old grease:

Apply baking soda over the surface treated with vinegar or lemon juice.
As a result, there will be a reaction between acid and alkali, which will help you deal with chronic fat.

Important! When using this method, allow the substances to react for 15-20 minutes and then rinse thoroughly and gently with a dry, clean cloth.

Method 2

Apply mustard gruel to the contaminated surface for 15-20 minutes.
Rub a little and rinse with cool water.

Important! For particularly stubborn dirt, you can use refined gasoline. Apply it on oily spots, wait for 10-15 minutes, rinse.

How to clean burners, switches, grates on the stove from soot:

To clean gas burners, remove them and place them in a foamy solution of dishwashing detergent and water for 15-20 minutes, rub with the rough side of a sponge, rinse with water and wipe dry.
To remove dirt from switches, the best option will use cotton swabs or else cotton pads, which you pre-moisten in ammonia or ammonia-anise drops.
It copes quite well with greasy stains on switches and gruel from soda. For hard-to-reach places, it is best to use an old one. toothbrush.
To clean the grates on the hob, put them in a large container or in the bathroom and pour hot water. Add dishwashing detergent to the water and leave for 1 hour or even 1 night so that the detergent has a better effect on the dirt.

There are many more places and surfaces in the kitchen that need attention. Hurry up to find out which is better, and in practice, evaluate the ease of home care with the right approach.

During the cooking process, the stove is exposed to splashes of grease and food from pots and pans. All this leads to the fact that the stove must be washed. But what means should be used for this and how often, so as not to harm the surface, and to give the stove a new and sparkling look?

How often should you clean the stove
Soda
Ammonia
Lemon juice or vinegar
Glue
Activated carbon
Coffee grounds
How to wash an electric stove

How often should you clean the stove

The kitchen stove is in use every day. Especially if you live in the house big family, which needs a lot and variety of cooking. Of course, from an aesthetic and hygienic point of view, it is necessary to wash the stove every day. This will allow you to spend less time on work, as the pollution will be fresh and can be easily removed. But due to various circumstances, this is not always possible to do.

No matter how clean the hostess is, the stove is still exposed to varying degrees pollution. Of course, the grate and handles of the stove should not be washed every day, but work surface it is recommended to wipe every day.

Folk remedies for cleaning the stove

In order not to use harmful chemicals, you can use the grandmother's advice. Folk remedies allow you to make the stove clean and shiny.

To clean the stove with folk remedies, the following tools and substances may be useful:

Soda;
Ammonia;
Lemon juice or vinegar;
Glue;
Activated carbon;
Coffee grounds.

Important! When cleaning the plate, it is strictly forbidden to use metal scrapers, as this will damage the surface! Any dried grease and deposits are softened with soapy water.

Soda

The use of soda will allow you to clean the plaque from fat and scale not only on the working surface of the stove, but also in the oven. To do this, apply soda to the contaminated area, moisten it slightly and leave for one hour. Then dirt is removed with a cloth.

Ammonia

Ammonia is able to remove old fat from cooker. To do this, apply to the surface ammonia and leave overnight. The next day, the dirt, along with alcohol, is removed with a detergent.

Lemon juice or vinegar

Perfect for removing soot and grease from the stove lemon juice. To do this, dilute the juice of one lemon with water and wipe the working surface of the stove with this liquid. The oven is cleaned in the following way: add lemon slices and detergent to the water. Preheat the oven to 100 degrees and place a container with pre-prepared liquid in it for 30 minutes. After that, wipe the surface with a damp sponge.

To clean with vinegar, moisten the work surface and leave for three hours and wash off all the soot with a damp sponge.

Glue

Another operating means is an adhesive based solution. To prepare it, you need to mix 1 tablespoon of silicate glue with 3 tablespoons of soda ash and half a tablespoon of any washing powder. All this is poured into a glass of water. room temperature, shaken up and used as a means for cleaning the stove from grease or soot.

Activated carbon

To clean the hob from grease and carbon deposits, you can use Activated carbon. To do this, several tablets must be crushed and applied to the contaminated area. Then moisten everything with water and leave for 10 minutes. Remove dirt with a regular sponge.

Coffee grounds

Grease and soot from the hob is perfectly removed by coffee grounds, which remain after insoluble coffee. It must be applied to dirty places and rubbed a little with a sponge. After two minutes, the contaminated area is wiped warm water.

Household chemicals for cleaning the stove

Provided on the market great amount chemicals for washing the stove. But when choosing household chemicals, it is important to be very careful, as not all of them are suitable for all cooking surfaces. Popular cleaning products that give results and minimally affect the condition of the hob include substances from the following companies:

Pril;
Myth;
Sanita;
Pemolux.

For stains that are old and strongly ingrained, it is recommended to use Shumanit.

How to wash an electric stove

The product suitable for washing an electric stove depends on the material from which the surface is made. For example, a plate with metal surface can be easily cleaned of scale and grease with a soapy solution, which is applied to the contaminated area for half an hour and washed off with a simple sponge. If the dirt has already eaten in, then you can use any chemical agent intended for a metal surface.

If the surface of the stove is made of enamel, glass, ceramic or glass-ceramic, then you need to be careful and use only a foam sponge or soft cloth so as not to damage the surface. To remove carbon and grease, you can use a solution of soda and water. And to eliminate stains from the working surface, ammonia is used, diluted in water in a ratio of 1:10.

Advice! For security electric stove before cleaning it is recommended to disconnect from the mains!

Cleaning the induction and glass-ceramic hob

A glass-ceramic stove requires special tenderness and accuracy, as scratches and chips can form as a result of improper washing. Great for dried-on grease stains special agent as a cream or spray. It is applied to the surface and after the time indicated in the instructions for the cleaning agent, it is removed with a foam rubber sponge. The dirt that remains is removed with a paper towel without friction.

The induction hob is also cleaned with special detergents and a microfiber cloth. When choosing a product, it is important that there is no soap in the composition, as it can discolor the surface of the plate.

How to wash stains and burnt spots

With stains and stains, a mixture made on glue at home does an excellent job. For this, 1 tbsp. l stationery glue (but not PVA) is mixed with 0.5 tbsp. l washing powder and 3 tbsp. l soda ash. Dilute with a glass of water, shake and use as a cleaning agent.

The agent is applied thin layer on contaminated areas and leave for 15 minutes, after which it is gently wiped with a soft cloth or sponge moistened with water. For a complete cleansing, you can use a paper towel, which will remove the remaining stains.

How to clean the stove from soot and grease

Where food is prepared must always be clean and hygienic. Therefore, it is very important to wash the stove from soot and grease. For a plate with a metal surface, such a folk remedy as soap and soda is perfect. Such a solution corrodes fat perfectly, so there is no need to rub the stove. It is enough just to wash off such a solution with a damp cloth half an hour after applying it to a dirty surface.

Enameled and glass hobs are best cleaned of grease and soot with soda, which is mixed with water. The resulting slurry must be applied to a damp sponge and wipe the surface with it. After that, the hob must be wiped with a solution of ammonia, which is mixed with water in a ratio of 1:10.

In addition, there are special chemicals that help to effectively eliminate soot or grease. When choosing, it is necessary to take into account what surface the plate has.

How to wash burners, grates and stove handles

During cooking, handles and burners are very often dirty. If you know some of the nuances, they can be cleaned without any problems.

There are two options for handles: removable and non-removable. If the handles are removable, then cleaning them is not difficult: just soak them in soapy water and wash by yourself or using a dishwasher. If the handles are not removed, then you will have to make a little more effort. For cleaning, you will need ammonia-anise drops, which is sold at any pharmacy. For efficient removal fat, you can use ear sticks or a toothbrush.

The burners are also easy to clean with soapy water. To do this, just soak the cover (reflector) in this solution, and then wipe it thoroughly.

To wash the grate, it is necessary to take into account the material from which it is made. If it is steel, then it is enough to use a strong detergent that is applied all night and simply wiped with a damp sponge in the morning. If the grate is enameled, then it can be washed in dishwasher or any chemical agent special purpose.

The most effective way to clean the stove in 5 minutes

To do this, it is enough to mix 3 tbsp in water. l soda ash, half a spoonful of washing powder and 1 tbsp. l glue. Shake it all up and apply on the surface of the plate. The mixture is applied in a small layer and left for a while. Then, with the help of water, the mixture is washed off along with the dirt.

Interesting! This mixture can be stored long time in glass jar. Just shake it before use.

07/05/2018 2 3 307 views

The stove is the main attribute in the kitchen. When cooking food, there are always traces of fat that are not always removed immediately. Consider how to clean the gas stove from carbon deposits at home. Washing it is not as difficult as it seems. With the right selection of means and methods, plaque is quite simply cleaned off.

Hot surfaces should not be washed - there is a risk of burns. It is easier to remove cooled burners, as they will not damage the skin and the areas on which they will stand. Under them is usually a large accumulation of dirt. If they are fairly clean, they should be processed. wet wipe. metal wires and scrapers should not be used to clean the stove.

How to prepare the surface for cleaning?

Before you start washing the stove and grate, you should turn off the gas supply according to the operating rules. This will prevent accidental release of gas and reduce the chance of damage and injury.

After that, you should carefully remove the cast-iron grate, because a lot of dirt remains on it, including greasy coating difficult to clean up. It is processed in a soapy solution. It is also advisable to remove burners and electric ignition, if the design of the stove suggests this.

For the best possible cleaning, you will need to prepare the surface. Pour hot water, add soda to soften old dirt. Sprinkle soda evenly over the moistened plate, wait half an hour. Then remove it with a soft sponge and proceed to the main process.

Metal washcloths should not be used, as there is a risk of serious damage to the coating. It's best to complement the sponge with a toothbrush or cotton buds for hard-to-reach parts like handles.

How to clean a gas stove from fat and soot with folk remedies?

Often, the owners of gas stoves are not aware of what to use to process it. Folk recipes chosen by those who do not want to buy household chemicals, preferring to use safe and proven methods. Finished products has disadvantages such as low level safety, the risk of allergies and strict adherence to storage rules. It is allowed to use it only with rubber gloves, so as not to harm the skin.

The solution can be made independently at home. The ingredients for the composition can be found in any apartment. It will wash no worse than household chemicals, while there is no danger to health. Components such as soap solution, vinegar essence, soda, ammonia or ammonia-anise drops, citric acid are used.

Main ways:

Soda, powder and glue. Would need soda ash(3 tablespoons), washing powder (0.5 tablespoons), glass office glue (1 tablespoon). Mix ingredients, pour water. Apply a small layer on the plate. If powder crystals are noticeable, you should not be scared and take unnecessary actions. Wait a quarter of an hour, wash off.

Soda and vinegar. Connect the components in equal proportions. As a result, a liquid porridge-like mixture is formed, which should be applied to the surface. The more time it remains on the stove, the easier the cleansing process will go. After half an hour or an hour, wipe with a sponge and rinse with water.

Lemon acid. Juice squeezed from citrus is used. Apply a few drops to dirt, clean with a sponge after an hour. It will be no less effective to use acid sold in packs. Pour water into it, mix until a paste. Apply to problem areas or the entire slab. After 60 minutes, you can start cleansing.

Soda and ammonia. Moisten the surface, apply soda in a small layer. After 60-90 minutes, clean with the hard part of the sponge, remove the residue. Mix water and ammonia in a ratio of 1: 1, wipe the surface.

If the inside of the burner needs to be cleaned because dirt is blocking the gas flow, a toothpick or pin should be used. Get rid of plaque and fat in small holes with a toothbrush.

Now quite common hobs made of stainless steel. They look solid and impressive, unlike enamel plates. But such devices require more meticulous care, as splashes and stains are noticeable on them.

Oily drops are easier to clean up when they are not old, so the surface should be treated daily. Unburned fat is removed with a simple sponge with the addition of dishwashing gel. You can treat the device with a slice of lemon. Wait for the acid to be absorbed for a quarter of an hour, wipe with a sponge and there will be no streaks.

The heating parts enclosed in a metal case are not removed from the electric stove. Dirt accumulates near the burners, which are difficult to remove. To wash it, you need to wait until it cools completely. Then disconnect from the mains, apply a cleaning agent, wait a bit. After processing several times with a damp cloth until the excess and dirt are completely eliminated. Better choose soft remedies with microgranules.

If you have a glass-ceramic stove, then you can read information about cleaning it.

lattice

The surface of the device is cleaned quite simply when compared with the processing of the grate. Moreover, many housewives leave the item “for later”. But old spots are much more difficult to wash off, and the layer of fat is scary appearance. Before starting the process, you should pay attention to the material from which part of the device is made. Care will depend on this.

There are the following types:

metal with enamel;
cast iron;
steel.

Cast iron is the most fastidious and difficult to process and water can not cope with it. It needs to be baked:

blowtorch;
over the stove;
at the cottage over the fire;
in the oven.

Trying to clean carbon deposits and fat with a knife and sharp objects is not worth it, otherwise you can ruin the coating. When calcining, the grate above the fire should be ignited and cast iron pans- the result will pleasantly surprise.

Enamel has a smooth finish with a surface easy cleaning so the following methods can be used:

Dishwasher processing.
Soaking in a soapy solution, after cleaning with a sponge with the addition of soda.

It is also forbidden to use a knife, otherwise scratches will remain. For stainless steel, simple cleaning products are used. It is easier to wash than other types of plates. You need to act according to this algorithm:

Place the grate in a bathtub filled with soapy water.
Leave a thick maple on the floor, put an element, treat it with dishwashing gel, leave it all night.
Rinse with water.

This part of the plate is considered the most problematic. The main methods of its purification:

Water and soap. Suitable for stubborn stains. thick layer soot and fat this method will not eliminate. Skip half or third laundry soap through a grater, put in a container of water or a sink. Liquid should be approximately 7 liters. Leave in grate solution for a couple of hours. After that, grease and dirt will come off and they can be easily removed with the hard part of the sponge.
Ammonium chloride. This method is the cheapest and most efficient. It is important to wear protective gloves. Thoroughly moisten the sponge in alcohol, process the grate completely. Put it in cellophane, tie it up and wait a few hours. Then rinse the grate, remove grease and soot, treat with any cleaning agent.
Soda solution. Pour ½ cup of water into the water in a ratio of 1: 1, stir until the consistency of a paste. Apply to the grate, wait two to three hours. Pollution will quickly disappear, in advanced cases you can use a hard sponge.
Soda and vinegar. Add ingredients to bath water, wait, then rinse.
Car engine cleaner. Apply it, then rinse well.
Dry mustard. Process the rods, wait a few hours, rinse.

Finally, wipe the grate with a dry cloth, as grease easily sticks to wet surface especially to stainless steel.

Burners

Each hostess may face the problem of a weak stove flame. It sometimes changes shade or disappears regularly. In some cases, this is due to gas pressure. But usually it's about pollution. Pieces of fat and food clog the holes on the stove, which is why the burners do not work well.

The following methods are suitable for cleaning:

Vinegar. The method is chosen for fresh and mild contamination. Spray it on the burner, wait a quarter of an hour. Wipe with a clean cloth.
Soda. It can be used for difficult stains. Rinse the burners with water and dishwashing gel. Mix water and soda to a paste-like state, apply to the burners and wait half an hour. Remove excess with a sponge and rinse.
Ammonia. The method should be used when previous methods have failed. Apply a quarter cup of the product to the contaminated areas. Cover each burner with cellophane, leave overnight, rinse and dry the stove.
Soak. In this way, light dirt can be cleaned. Moisten the burners in a container or bath of water. Mix dishwashing gel and soda in a ratio of 1 to 1. Process the parts, cover with bags. Wait an hour, remove excess funds.

The nozzles also need to be cleaned. First you need to make sure that the stove has completely cooled down. Then open the window in the kitchen. Action algorithm:

Remove the grilles, disconnect the gas divider.
Pull out the burner. There is a small hole inside.
Take a paper clip or a small wire, bend it.
Send to the nozzle, twist about five times.
Repeat steps for each injector.
If the gas dividers are clogged, clean with a needle or a toothpick.

Pens

Depending on the fixation method, the processing method differs. The following options are available for detachable handles:

Soap solution. Remove parts, dip in soap solution. The water temperature should be approximately 80 degrees, washing powder or cleaning agent is added to it. After a quarter of an hour, treat the switches with a toothbrush. Increased attention should be paid to the area adjacent to the stove.
Table vinegar. Dissolve 0.2 l of the product in 0.7 l of cool water in a saucepan, send the switches into it. Put on the stove over medium heat, wait for it to boil. Leave for ten minutes. Pour the solution, after the handles have cooled, wipe with a dry cloth. You can use the method for oven handles, as grease and streaks remain on them.

If the handles cannot be removed, they cannot be reworked internally. But outside, you can clean them with a toothbrush, cotton wool, ear sticks or toothpicks. There is no need to buy household chemicals, as there are folk recipes:

Ammonium chloride. It should not be applied undiluted, it is better to use ammonia-anise drops or a mixture of alcohol and water in a ratio of 1 to 1. To treat the handles, dip cotton wool or cotton buds then rinse with water.
Lemon juice. Used alone or together with baking soda to improve efficiency. Squeeze citrus, dip toothbrush, apply to switches, rinse. Soda is better to use not calcined.
Wet wipe. It contains castor oil and citric acid. Wrap a finger, process the handles and the vertical part of the plate. Carbon deposits are not often found on the outer area of the oven, but the glass and door can be easily cleaned this way. Periodically change the napkins, after the part wipe with a clean cloth.

Video: how to clean a gas stove from carbon deposits at home?

The lid that covers the stove should also be cleaned. On the glass surface spray with detergent, then rinse with water.
If there is water in the nozzle area, you will need to wait for its complete evaporation. Then there will be no gas. You can take thin rubber tube and remove liquid from the pipeline.

It does not take long to clean the stove if you act carefully and use proven products. Can be easily handled without expensive household chemicals. Folk methods do not require large financial investments and are absolutely safe. Before starting the process, wear protective gloves so as not to damage the skin.

A modern kitchen is hard to imagine without a gas stove. That is why it is important enough to keep it in good condition so that it lasts a long time after purchase. There are a number of recommendations on how to clean gas burner efficiently and for a short time so that this procedure does not cause unnecessary trouble. We have collected all the proven methods in this publication.

Almost all housewives, sooner or later, could face the fact that the burner flame burns weakly or does not exist at all, it also happens to be of a different color, and if the stove is not in very good condition, then the burners stop functioning altogether.

Sometimes the root of this problem lies in the fact that the gas is supplied under low pressure. However, quite often the cause is dirty dividers under the burners. When you cook food, moisture or food gets trapped in the small holes. Also, contaminated areas appear when a detergent in the form of a powder is used to clean the plates.

Gas burner cleaning steps

The cleaning procedure is divided into the following steps:

It is necessary to clean the burner itself, which has elements such as a divider, base and burner cover.
Also, the gas supply nozzle is cleaned. This is done when there is no gas at all or it is supplied very weakly.

Note! Do not try to fix the nozzles with your own hands, as this should be done by a gas fitter. The master will check how the gas is supplied, as well as the condition of the nozzles and burners, after which he will be able to repair the burner, if necessary.

We properly clean the elements of gas burners

This process can be carried out in several ways. There are the following methods that provide quick and proper cleaning of the gas stove:

Option number 1

First you need to check if the device itself has cooled down, then remove the burner from the stove.
After that, disconnect the dividers and clean their holes with a needle or similar thin object.
You will need a small bowl that needs to be filled with water (preferably hot temperature).
Prepare a solution of water and detergent in a ratio of 10 to 1.
It is necessary to lower the disassembled burner elements into the resulting mixture for several minutes (up to half an hour), and if there is a lot of dirt on them, then you can keep the parts in water for a couple of hours.
After the specified period of time, wear rubber gloves.
Clean the dirt on the appliance elements with hard kitchen sponges.
The gas channel of the burners is easy to clean with toothbrushes.
Then rinse the parts with water warm temperature) to rinse off the remaining cleaning agents.
Next, you should wipe everything using napkins or towels, or put the elements to dry.
When everything is dry, you need to collect the burner.

Option number 2

It is necessary to remove the dirty burners and disassemble them into elements.
You need a saucepan small size, in which you should pour 2 tbsp. l. acetic solution (better than 9 percent).
Mix one glass of water (cold) with the vinegar.
Put the resulting mixture to boil.
Next, you need to lower the parts of the burner into the solution for about half an hour.
After the specified time, put on rubber gloves and clean the burner elements with a soft sponge.
Rinse the parts with warm water (preferably more than once).
Then you need to wipe everything dry with a cotton towel.
You can collect all the elements together.

Note! If desired, you can replace vinegar with ordinary baking soda, as this tool also effectively fights pollution.

Option number 3

If you need fast way cleaning, which does not require soaking parts, you can do this with Milam-gel. This product you will find at the respective points of sale. To use it, follow these steps:

You need to remove the burners and apply a little product on their surface.
Let them lie down for a few minutes, and then you should clean them using sponges or brushes.
Rinse all parts well with water (preferably warm).
After that, you need to dry or wipe the elements of the burners with a towel.

Nozzle cleaning

Before starting the procedure, you must do this:

Be sure to turn off the gas and let the stove cool.
You should open the vents or windows in the kitchen.

After that:

It is necessary to remove the grilles and disconnect the dividers.
Then you need to remove the burner, inside which you can find the nozzle in the form of a small hole.
Use paperclips or wire to clear the holes.
Next, return the grates and burners to where they should be.

Instead of these tools, they also use such as strings, a needle, syringes, pins, etc.

At least once a year, you must contact the gas fitters who will inspect the condition of your gas appliances.
Try to clean the stove well from accumulated dirt and plaque.
To wash the working surface of the appliance, do not use detergents in the form of powders, as they accumulate and fall into the opening of the burners. Instead, gel products with mild properties should be used that cannot harm the surface of the device (due to the fact that they are liquid).
Without fail, during cleaning, turn off the gas and thoroughly ventilate the apartment.

Using these recommendations, you will be able to keep the stove in good condition, because everything Appliances must be handled with care regular care, which will ensure a long service life of the gas stove in your kitchen.

It's hard to imagine modern kitchen without gas stove. Above her skillful hands"conjure", develop their cooking skills, cook delicious dishes with which they treat all members of their family. And what an aroma captivates the sense of smell when another cake is baked in the oven - fragrant, tasty, tender and appetizing.

But all these joys end for the hostess with burnt fat on the surface and soot in the oven. How to get rid of it simple and accessible ways how to clean a gas stove and give it a beautiful look?

Most best option- Always keep the gas stove clean. That is, immediately after the process of preparing the next dish, gently wash it with a damp kitchen sponge, and then wipe it dry with a soft towel.

But not every time there is time for this, and it is unlikely that anyone will start cleaning the stove oven when its walls are still hot. And even the most best housewives may not keep track of cleanliness, and stubborn dirt appears on the surface of the gas stove.

Stove cleaning - highlights

The process of cleaning a gas stove implies: a clean surface, clean handles, burners, grate, oven and body as a whole.

Do not forget that even the most durable enamelled surface boards may not be able to withstand abrasive substances, so any cleaner containing these components is not recommended.

Otherwise beautiful and shiny surface will soon fade, scratches and dark, hard-to-wash spots appear on it. It is also not recommended to use metal scourers to clean the surface of the gas stove.

First you need to remove the grate, burners and handles from the gas stove. Wipe the surface with warm water using a sponge, removing excess dirt. Using ready-made products will speed up the washing process if you follow all the recommendations that are described on the sticker.

Spread the detergent over the entire surface.
Leave for a while so that the product reacts with fatty stains.
Wash off with warm water.
Wipe dry with a soft cloth.

But you can also give the gas stove a clean and tidy look with the help of home-made products:

Vinegar and soda:

Spread 9% table vinegar evenly over the entire surface.
Sprinkle a layer of baking soda over it.
On more contaminated places, you need to pour more soda, and where the stove is cleaner - in a thin layer.
The reaction will come immediately - the soda will begin to hiss and foam.
At the end of the reaction, wipe the dirty places with a sponge in a circular motion. wash away clean water and wipe dry.

shower gel or liquid soap and soda:

To prepare the cleaning agent, you need to pour 2 cups into the container hot water, 0.5 tsp shower gel and 0.5 tsp. baking soda.
Stir contents until smooth. Treat the surface with the resulting product with a sponge and leave for half an hour.
After the time has elapsed, the plate can be easily washed with a sponge dipped in warm water.

Dry mustard, soda and water:

There are two ways to use these funds. Can be taken in equal parts soda and mustard and dilute them in a small amount of water to the consistency of thick sour cream.
Or you can simply moisten the surface of the stove with water and sprinkle soda and mustard on top. Then mix everything with a sponge and leave for 20 minutes. You need to make sure that the cleaning mixture does not dry out. After the expiration date, carefully remove the mixture with a sponge and rinse the stove with warm water. The upper part of the burners and the handles of the stove must be lowered into the prepared product for 15-20 minutes. After that, greasy stains will be easily removed with a sponge.

Important! Before returning upper part and the handles in place, be sure to wipe them dry.

Also, do not ignore glass lid with which the plate is covered. Spray it with a degreasing detergent and rinse it with clean water.

Interesting! The upper parts of the burners that are not too dirty can be easily cleaned with wet wipes.

Lattice

If you can clean the surface of the gas stove with easily accessible home-made products, then you will have to tinker with its grate. Unfortunately, many mistresses of this element kitchen equipment they do not often give attention, leaving it “for later”. But over time, it becomes more and more difficult to wash the grate.

Before washing the grate of a gas stove, you must decide on the material from which it is made. The fact is that each of them requires individual care:

steel;
enamelled;
Cast iron.

Cast iron grate

Cast iron grills are considered the most finicky. They are not as easy to wash as it might seem at first glance - such gratings are calcined:

With a blowtorch,

Over the fire
In the oven,
Above the stove.

This procedure is best entrusted to men.

Important! Never scrape carbon deposits and greasy areas of the grate sharp objects so as not to damage the cast iron itself.

Stainless steel grates

Stainless steel is less whimsical and can be easily washed by anyone. detergent.

To do this, you can use the following methods:

Lay an oilcloth on the floor, lay a grate on it and treat it with an ordinary dishwashing detergent. Leave overnight, then rinse with water and wipe dry.
Fill the tub with soapy water and place the grate in it overnight. Rinse under the tap in the morning and pat dry.

Enamelled gratings

Enamel attached to the grate smooth surface, due to which it can be cleaned of soot in the following ways:

In the dishwasher
Soak in soapy water and clean with a sponge dipped in baking soda.

Important! Do not use sharp knives to clean the enamel gratings.

Folk methods for cleaning the grate of the stove

To quickly wash the gas stove grate at home, you can use folk tips:

Cleaner car engine. Treat the grate with a product, then rinse thoroughly and rinse in warm water.
Dry mustard. It helps clean enamel and stainless steel grates. Apply the product on the rods and leave for 2-3 hours. After that, rinse under running water.

Important! Wear gloves when cleaning the grate.

Fixed handles and plate body

Some gas stove models have non-removable handles, which makes cleaning difficult, especially with inside. But around the handles and outside, this process is quite doable with the help of toothpicks, ear sticks, cotton pads and a toothbrush.

Lemon juice. You can mix it with baking soda. Prepare the solution and use a toothbrush to clean the handles. Rinse with warm water and wipe dry.
Wet wipes. Due to the fact that they contain Castor oil and citric acid, they can be used to easily clean handles, oven doors and glass. Wrap a cloth around a toothbrush or finger and remove all dirt. You need to change napkins as they get dirty.
A solution of ammonia 1:1. Pour ammonia into a container and dilute it with water in a ratio of 1: 1. Soak cotton pads in the solution and clean the handles of the gas stove. Then rinse them with warm water and dry.

The body of the gas stove is also important to keep clean. If the stove is built into kitchen set, then its sides remain inaccessible. However, often splashes of fat during the park and cooking flow down the walls, forming a very unpleasant picture. Therefore, it is recommended to pull out the gas stove at least once a month and wipe the walls with one of the methods described above to wash its surface.

Attention! To extend service life your gas stove. It is very important to keep it clean.

findings

It is important to remember three basic rules for cleaning a gas stove.

The fat should be soaked. All parts, including the surface of the plate, must first be moistened with any degreasing agent for at least 30 minutes. Only then proceed to the process of washing, rinsing and wiping.
Keep grates clean. Never postpone "for later" the procedure for washing the grates of the stove. Systematic procedures will save you from exhausting work, and your stove will always have an attractive and clean look.
Wipe dry and keep clean. Be sure to wipe all parts and the surface of the hob dry with a clean cloth. Otherwise, at the first opportunity, droplets of fat will happily settle on them, and all your work will be reduced to zero.

Each hostess should have several sponges and towels with which she can use as soon as necessary.

It is not worth any effort to wipe the stove every evening, which will greatly facilitate the work, and the kitchen will shine in all its beauty.

Categories

Popular