Folding coffee table with your own hands. DIY coffee table

The drawings of which will simplify the process of its manufacture for you, in fact, it is not difficult to design. Today, perhaps, no modern living room is complete without that piece of furniture.

Coffee table you can easily do it yourself, while saving a fairly large amount of money.

Many use it as a place where they store magazines and remotes from various devices, some arrange a romantic lunch or dinner for him, while others prefer to use it simply to decorate the interior. To complete the image of a coffee table, vases of flowers or beautiful napkins are often placed on it.

Determining the purpose of use

Coffee tables are used to complement the completeness of the interior, and to give it individuality. Such furniture is universal. Coffee tables can be found both in the cottage and in small apartment. If you decide to make a table with your own hands, do not be afraid and do not despair.

'Cause before you start doing Coffee table with your own hands using a drawing, you need to determine for what purposes it will be used. From this will depend on its design, and size, and the material from which it will be made, and color design. The drawing can be easily done by yourself.

One of the most popular is considered a coffee table made of wood. Such a model is distinguished by stability and a certain solidity.

A beautiful coffee table, the drawings of which are prepared and located below, has the following dimensions:

width - 70 cm;
height - 47 cm;
length - 146 cm.

The table will be made much easier and faster if you make a drawing of it, at least a schematic, before starting work. So, the drawing will help to avoid possible errors, and also you decide which parts and in what quantity you need to purchase in a store for making a table with your own hands.

Design and installation of legs and base

To make a coffee table, you need to choose beautiful and high-quality wooden bars without any knots or cracks. They can be cut and cut to size right at home or in a store.

All elements of the future coffee table must be carefully cleaned.

During work, make sure not to deviate from the planned drawing of your future design.

From wooden bars, having a length of 42 and 52 cm and a section of 10 × 10 cm and 2.5 × 10 cm, we make two structures on the sides. They can be connected with wood glue and self-tapping screws. Coffee tables should be perfectly flat. Make sure that the location of the fastened elements is at a right angle.
Before screwing in the screws, make small holes with a drill in the places where they will fit. Use a drill with a smaller diameter than the diameter of the screws for this.
Then screw in the screws, trying to “drown” their hats as far as possible in the wood. Make sure that the screws on all sides of the structure are at the same level.
Next, using a bar with a cross section of 2.5 × 10 cm, we combine these two structures into one. Strictly monitor the observance of the right angle.
Then we attach two more bars on each side, having a section of 2.5 × 10 cm. They will be needed for a kind of table skirt.

This completes the first stage of making a coffee table with your own hands - the creation of its frame.

Now it is worth checking the correctness of the connections. We check our drawings and the table itself diagonally. Both diagonals must be the same length. After we are convinced that no adjustments are required, we are engaged in the sides of the table. We take two bars with a section of 2.5 × 10 cm and close the side ends with them.

Countertop installation and finishing

Now let's move on to the tabletop. We make a solid foundation for it on the frame. To do this, take 4 bars with a section of 5 × 5 cm and fix them. Make sure that the bars are at the same distance from each other.

Now our frame has become rigid and durable. We compare the drawings and deal with the countertop itself.

The original coffee table can be made from ordinary wooden boxes.

Along the edges of the table at an equidistant distance from the edge, we fix two bars with a section of 5 × 15 cm.
We adjust the length of the main bars to this distance, from which the countertop will be made.
Before you install the planks for the countertop, be sure to sand them.
You must fix the first bar strictly in the center of the table.
Place the rest of the bars in turn on both sides. They can be planted on carpentry glue or screwed with screws, self-tapping screws.

Make sure they are tightly pressed against each other. Otherwise, after a couple of days, unpleasant gaps may form in your countertop. Lay the entire countertop in this way. Coffee tables with such a tabletop look the most impressive.

Now, using wood putty, begin to mask any visible recesses in which the recessed heads of your self-tapping screws are located. We wait a few hours until the putty dries. Then we carefully grind those places where it was applied. Your new coffee table is almost ready. Now it needs to be given the right color:

choose a special stain for wood or potassium permanganate and, applying it to your design, try to achieve the desired shade;
after the table is dry, cover it with several layers furniture varnish, we cover the countertop two layers more than the entire structure;
leave it like this for a day.

Now your new coffee table, which you made with your own hands using the drawing, is ready.

A convenient and often inconspicuous element of the interior helps to create an atmosphere of comfort. When there is a desire to give the atmosphere individuality, then it's time to embody bold ideas, the easiest step is to make your own coffee table. Who said that a functional piece of furniture cannot turn into its “highlight”?

How to make a table with your own hands

The process of creation brings pleasure, and when there is still practical use from this, then it's time to transform into a designer to make a coffee table with your own hands. Lack of experience cannot serve as an obstacle, because the choice of improvised materials (chipboard, glass, wood, tires, old doors, pallets) is huge, and ready-made drawings and minimum set tools help to become a skilled craftsman. Select expendable materials, make blanks, assemble the structure - this is how you get a coffee table with your own hands.

Coffee table drawing

Schemes with step by step instructions how to make a table with your own hands is easy to find on the Internet. Sketches with dimensions will be especially useful for those who are going to make a coffee table out of wood or glass. Based on an accurate drawing, it will be possible to greatly simplify the subsequent assembly process. If you want to make your own original table from unusual materials the chance of finding a drawing will be minimal. Often such products are accompanied only detailed description, which is a good alternative to dimension sketches.

How to make your own countertop

Thinking about making a coffee table with your own hands, you have to start with the basics. A simple version of the design of this piece of furniture is a countertop ( horizontal surface) and the base or support legs (vertical stop). Complex variations suggest the presence additional elements, for example, hinged shelves or drawers, but even such designs rarely do without a countertop.

In order for the future do-it-yourself coffee table to successfully fit into the interior, you need to choose the right material for the countertops. For beginners, it is better to opt for chipboard, plywood, use glass of simple shapes. If the desire to create an exclusive piece of furniture does not leave, then it makes sense to master the technique of decoupage, craquelure, art painting. The decorative finish of the countertop will look interesting, and the coffee table will become the “highlight” of the living room or any other room in the house.

Types of coffee tables

How to make a table with your own hands, combining fantasy, skill and practicality? First steps to create original item furniture, it is better to start with the implementation of finished drawings with detailed instructions. Choosing this option as a basis, nothing will prevent in the future from giving the thing you created with your own hands the desired individuality. It is not only decor and improvised material that makes coffee tables different from each other. The appearance of this piece of furniture is also able to influence their diversity; coffee tables may differ from each other:

shape (square, rectangular, round, oval);
material (wooden, glass, metal, plastic, combined);
design (simple, folding, transformer, folding);
style (classic, country, retro, hi-tech, colonial, minimalism).
the presence or absence of decorative elements.

Folding

Making a coffee table suggests that it will successfully fit into the interior, even if we are talking about a small room. For this, among the many options, there are folding models. To make such a coffee table for the living room, coffee - for the bedroom, balcony or cottage help metal profiles and corners. To make the design of this interior element light, it is better to choose aluminum, which is easier to process than iron.

The advantage of any folding furniture is savings usable space. If necessary, the coffee table can be expanded, and then the structure is easily assembled to hide it for storage. It will be possible to make a folding coffee table with your own hands even in the absence of carpentry experience, having the following materials at hand:

countertop (wood, timber, chipboard, plywood);
U-profile- 2 pcs.;
corner (aluminum);
drill driver;
fastening parts (self-tapping screws, bolts, nuts).

Transforming table

The functionality of some individual interior items can reach perfection. The transforming coffee table has become the embodiment of an idea that implies a combination of convenience, originality and space saving. Transforming models look spectacular not only in the photo: the top part, which serves as a tabletop, can be pulled out or hidden if necessary using a mechanical lever or an electric drive.

Making a transforming table with your own hands will be a little more difficult than a simple or folding design. Main element construction - a mechanism with a system of levers, while it is desirable to work smoothly and without a rumble. If for manufacturing we take sheets of chipboard or wood, then sliding system should be hidden, and in transforming glass coffee tables this element will be on display, playing the role of decor. Finished drawing will help to realize the idea faster, and for individual projects you will have to master 3D modeling programs (Google Sketch Up, PRO 100).

Visually save space without cluttering the room, helps transparent and almost weightless design of the glass table. In terms of strength, this material is not inferior to wood or plastic, because the countertop is made of tempered glass. Manufacturing glass table it will cost a little more, while cutting a sheet with a thickness of at least 12 mm is best ordered in a workshop, where they can additionally grind the edges. To do this at home with your own hands, you can use a file, a felt wheel, sandpaper, but this process requires caution.

It will be more difficult to process the edge of the glass or cut it at home, because you will have to use a glass cutter, but you can glue two or more layers on your own using silicone for aquariums. The same material is often used by home craftsmen to glue decor or fittings, such as metal wheels, or attach them to a coffee table with glass thanks to suction cups.

DIY round table

A century ago - a must-have item in every living room to welcome guests for a cup of tea. For modern home master to make a round table from boards with your own hands will not be compact in size special trouble if at hand there is improvised material and a set of tools:

circle of plywood (wood);
timber (for legs);
jigsaw;
drill driver;
grinding tool;
drills, bits.

How to make a wooden table with your own hands? Option round table can only be done by those who know how to work with carpentry tools. A round tabletop can be cut out from a single piece of plywood or from a blank from boards. The desire to create an exclusive piece of furniture to be embodied in the form of an interior item that will create a zone of psychological comfort. Assembling the parts and fixing the structure, the finished coffee table round shape can be lacquered to preserve the grain of the wood, or paint can be used to highlight the individuality.

Video: do-it-yourself coffee table from chipboard

Those who are not particularly concerned about mobility may catch fire to see in their living room a solid table made in rustic style. Such a craftsman can be offered to create a table from powerful boards. This version of the table will perfectly fit into the interior of any country house.

Unobtrusive thoughtful laziness, coupled with a thirst for creativity, can often lead to quite interesting discoveries. And one of these discoveries is a soft table made from a used tire.

It's easy to assemble:

In the chipboard, it is necessary to cut out two round segments, 3-4 cm in diameter less than the diameter of the tire chosen for the table.
Four legs, preferably metal, should be screwed to one of the round segments, since the table will turn out to be quite weighty.
The bottom segment and the tabletop are attached to the sides of the wheel by means of self-tapping screws.
After that, it remains only to decorate the sidewalls with the table top with jute piping.

Ultimately jute construction made of old tire looks great

You can use random items. After only a few hours of work with this material, consisting of 4 boxes and a pallet, a completely original and noteworthy design can be obtained.

You can also use planed bars and planks of a conventional picket fence to make a table.

Frame - a base made of picket fence can be tinted with black stain to give the structure a kind of contrast.

Also, wood can be combined well with metal parts. Here is a model of a table made from pieces of grooved board in a frame eaves plank on metal legs.

Legs made of smooth reinforcing bar look very elegant

According to the made template, the bars with a cross section of 10-14 mm are bent, to them by means of welding machine corners with a thickness of 1.5 to 2 mm are welded. The tabletop is made of tongue-and-groove boards "forties". After the legs are screwed to the countertop, it should be cleaned, toned and varnished. Legs can be painted black.

An excellent way to make a frame for a coffee table would be profile pipe. Having welded two identical squares from it, painted them and provided them with a tabletop made of strong boards, a good example of country furniture came out.

For stability, the squares under the tabletop should also be connected to each other by welding and a profile pipe.

Wood saw cut will also look very original in the form of a table top.

Electric planer, grinder, varnish, a couple of hours of time and the countertop is ready. The legs of the reinforcing bar will look great under such a massive tabletop.

A good option is a combination of glass and wood. Here is one of the options for such a community.

Light glass is originally combined with a massive wooden base

A mobile table looks very modern and stylish, made from an ordinary wooden pallet and covered with glass on top.

For lovers functional models a table - a transformer can come up. A few manipulations and the table radically changes its appearance.

The basis of the next transforming model is a pair of metal pedestal frames hinged to the table top. When the lid is turned, the horizontally lying structure rises to a vertical position.

The cover of this table is made up of two plates, shifted horizontally. One plate rotates around its own axis. If desired, this transformer can be easily deployed in dinner table for 4 people.

Transforming table "three in one"

After a successful experiment with plywood scraps, such a miracle may appear

For a long time, the master had to fiddle with measurements and calculations.

In theory - everything is simple, but in appearance - you can not say.

Not otherwise, for the calculation, it was necessary to use a three-dimensional modeling program.

Some home craftsmen do not bother with the complexity of the design and conceived just like to play with cubes. And here's what comes out of it.

The cracks are begging to be covered with a glass top.

A transparent optical adhesive is best for bonding glass to wood. Drill regular glass at home without special devices will be impossible.

For the manufacture of countertops, eurolining may be best suited. Spacers with legs and sides also come out well from it.

Euro lining tabletop

From eurolining, you can make a tabletop of any shape. It is easy to cut with a jigsaw.

Before making a coffee table, you should prepare some tools:

screwdriver;
belt grinder;
jigsaw;
roulette;
hacksaw.

Also, before proceeding with the manufacture, a drawing should be made, which will display the entire design and diagrams of the docking nodes.

Finishing the table should be done in two stages. Before assembly, sand the lid itself, legs and bottom with sandpaper. After the table is assembled, the product is coated with stain and varnish.

Even more simply, a table is made of chipboard. This material can perform two functions at the same time, form a surface and carry a load. It is better to use for veneered sheets, since no varnish can hide the wood-chip texture.

Upon completion of the assembly, all edges of both the tabletop and the legs with the bottom must be sealed with a special plastic furniture tape, warming it up with a building hair dryer before gluing.

Video: Homemade coffee table

In order to make a coffee table with your own hands, it is not necessary to dive into the depths. furniture technologies, but you need to know some of the nuances and tricks.

In addition, such furniture will cost much cheaper than the factory counterpart.

Before starting work, you should figure out what are the criteria, rules, requirements for this piece of furniture.

It turns out that there is only one condition - the height is from 40 to 50 cm. There are no more rules.

There are innumerable varieties of coffee tables, ranging from classic options and ending with original models made of seemingly completely unsuitable materials.

An important role is played decoration products: form, countertop decor.

DIY coffee table decor can be very different: mosaic, decoupage, art painting, craquelure. In the photo you can see the options for exterior finishes.

Sometimes just updating the decor is enough to completely change the look and style of boring interior items.

Before starting work, decide on the materials and appearance, prepare the drawings of the coffee table.

The greatest demand is for products made of wood and its derivatives (plywood, chipboard).

The original models are made of glass, but this material is harder to process.

Each of the materials has its own characteristics:

Plywood is strong and reliable, but with an ugly structure. This material needs a mandatory decorative trim. To assemble furniture, it is recommended to use moisture-resistant plywood;
Chipboard is an inexpensive, easy-to-process material. Chipboard sheets are now covered with a laminated layer that can imitate any type of wood. Main disadvantage- low moisture resistance. The non-laminated chipboard surface, upon contact with liquid, quickly swells and loses its presentation;
A solid solid wood is reliability, a beautiful structure and, with proper processing, durability. But natural wood is expensive and difficult to process. Due to insufficient drying, cracking of the surface is possible;
Glass - glass furniture looks stylish, fits into almost any interior. For this purpose, not any glass can be used, but only tempered sheets, preferably 0.8-1 cm thick, in addition, some work skills are required to work with fragile material. Another disadvantage is the need to constantly monitor cleanliness. glass surface. Even a single drop of water will give the countertop a sloppy look;
Stone - marble is usually used for the manufacture of coffee tables, it is pleasant to the touch, has a beautiful structure. The disadvantages include the high cost and complexity of processing. Fake diamond cheaper and easier to handle.

Manufacturing technology

To make a wooden coffee table with your own hands, it is not at all necessary to buy an expensive solid array.

Instead of wood, more affordable wood chip substitutes can be used.

To make a coffee table, you will need the following materials:

electric jigsaw;
a grinder, as a last resort, sheets of sandpaper of different numbers and a lot of patience;
hacksaw;
screwdriver;
self-tapping screws, metal corners;
countertop material (piece solid wood or chipboard sheet with lamination)
bars or ready-made balusters for legs.

First, make drawings of the countertop and other elements, mark out the material. The tabletop is cut out first with a hacksaw.

To work with laminated chipboard it is better to take not leaving chips cutting blade for laminate (bimetallic, with teeth pointed inward).

At the same stage, shelves (if any) are cut out.

After preparation horizontal elements using a jigsaw, all points are removed and the edges are polished ( special machine or sandpaper).

The legs are cut from chipboard, finished balusters or bars right size. In the latter case, careful grinding is necessary.

In addition, the legs are made of metal pipes with a round or rectangular cross section. In the photo you can see a table with legs and a chipboard top.

A stencil is made for the legs of chipboard, the image is transferred to wood board and cut with a jigsaw. The lower part is attached to the tabletop with glue or metal corners.

All end surfaces are carefully polished.

For the final finish, experts advise purchasing at any furniture store finished materials for edge trim.

The original table on wheels can be made from two old identical dressers of small height.

The upper part is made of glass or chipboard sheet.

Below in the photo you can see a coffee table made from a barrel.

First you need to update the dressers - carefully sand the surface and re-paint with a roller.

Then screw the wheels to the bottom and, if necessary, replace the handles. For the tabletop you need to do wooden frame with falsetto for inserting glass.

Finished top part attached with mounting adhesive to the bottom of the table on wheels.

Owners small apartments should know how to make a coffee table with a folding top. If desired, it can be quickly turned into a dinner.

For the manufacture of furniture, you need a ready-made mechanism with a gas lift or springs. In the photo you can see an easy-to-make coffee folding table.

Production order:

prepare drawings;
plywood or chipboard 2.5 cm thick with a jigsaw, saw it into pieces;
process the edge;
to make sure that the structure will be assembled, try on the details for the folding mechanism;
assemble the lower part of the table - legs, a transverse frame, to the bottom of which attach a board for attaching the mechanism;
fix the mechanism, check how it works;
to top mounts folding mechanism, screw the sheets of the tabletop.

Interesting manufacturing and decoration options

With a little imagination, you can make original models coffee tables (including those on wheels), which long time will delight you and your guests.

For manufacturing use a variety of, sometimes even unexpected things. The photo shows interesting coffee tables made from auxiliary materials.

The decor of a coffee table on wheels with your own hands can be updated with paints, mosaics, natural materials, wallpapers, various pictures.

See what materials are available, choose the right technique and get to work. One of the most simple ways- this is decoupage, i.e. gluing paper or fabric.

Before applying decoupage, the surface is ground, primed and painted. Pictures (photographs, fragments of napkins, lace, fabric) are pasted onto the prepared table.

After drying, the countertop must be covered with several layers of varnish.

A ready-made mosaic is often used to decorate a coffee table. For work you will need paint in a spray can, glue, grout, sandpaper, mesh mosaic, spatula and scissors.

Use a spray can to paint the table, after drying, apply tile adhesive. Lay out the mosaic pieces, press down and let the glue dry.

Grout the joints, after drying, wash off the remaining grout from the tiles. The photo shows tables decorated using the following techniques: decoupage, mosaic, stencil drawing, craquelure.

Paint can be used to decorate any surface! To create a bright pattern, it is enough to have two different colors, preferably contrasting colors.

Show your skills as an artist and paint by hand or make a stencil, draw images with it.

To work, you will need a paper stencil, two types of paint, sandpaper, varnish. Clean, prime and sand the surface, paint the table and let dry.

Fix the stencil and apply contrast paint. After drying, remove the paper blanks, varnish the product.

Craquelure is a way of artificially aging the surface.

A special craquelure varnish or its substitutes from improvised means: gelatin diluted with water, egg white, vinegar.

Depending on the means used, various cracks are obtained - from the smallest cobweb to large cells.

Looks good craquelure cracking over two layers of paint different color. Other techniques, such as decoupage, are perfectly combined with craquelure.

To find interesting ideas for decoration, you can see the corresponding photos, and based on this, come up with your own version.

Coffee table - at first glance, not the most necessary furniture. Therefore, its acquisition is endlessly delayed.

But it is precisely such items that make the interior truly cozy and comfortable. Therefore, we share ideas that will tell you how to make a stylish coffee table with your own hands and not go broke.

1. Democratic and accessible

A table made of boards and boxes.

To make such a table, you will need a pair of metal or plastic boxes and two large boards. Be sure to securely fasten the structure.

2. For the smartest

Elegant mini table.

Books with beautiful covers and a small glass for the tabletop - that's all the materials for such a coffee table. Books must be glued together, and the glass can be fixed on them with silicone glue, which becomes transparent after drying.

3. Ordered chaos

Original coffee table with your own hands.

A coffee table made of flat elements fastened together in a chaotic manner is an idea that is easy to implement. fit wooden saw cuts, pieces of boards, large books.

Table made of wooden saw cuts.

4. Industrial style

An industrial cable reel can become a table.

A reel for industrial cables is a thing that cannot be found on every corner. But if you are still lucky enough to become the owner of this item, you can make an excellent coffee table out of it.

Functional coffee table.

5. Table for motorists

Reliable tire table.

coffee table from car tire will serve long years. But it is desirable to use the tire without damage. It remains only to paint it, fix the countertop and legs.

6. Wooden table almost free

Making a coffee table with your own hands will turn out from a pallet.

Ordinary pallets that can be purchased for a penny - great material for making furniture. A little imagination, and the wooden coffee table is ready.

7. The second life of old boxes

Large drawers - the basis for a coffee table.

Another way to become the owner of a coffee table from natural wood- is to use old boxes as a material for its manufacture. Four large drawers, fastened together, form a stylish table.

8. Extravagant chic

Asymmetrical coffee table.

Especially original, but at the same time luxurious, looks like a coffee table on asymmetrical legs. The tabletop is made of a thick board or a wooden saw cut.

9. From the cottage - to the living room

Barrel table.

A large wooden barrel easily turns into a coffee table. It must be cut into two parts, and then attach the countertop and legs to one of them.

10. Roomy and functional table out of the box

Functional table out of the box.

A household box made of plastic or wood can also be used as a coffee table. In order for the table to be mobile, you can fix small wheels on its bottom.

11. Warm table

Metal radiator furniture.

Old heating radiator solid foundation, which will help to make a coffee table with your own hands. You just need to paint it desired color, attach the wheels and put thick glass on top.

12. From the interior door

An old door might come in handy too.

An interior door that has served its time becomes a material for making a coffee table with your own hands. It must be cut into several parts and fastened together.

13. If it’s a pity to quit and it’s hard to carry

Coffee table from a suitcase.

An old suitcase can become original countertop for a coffee table. You just need to attach legs to it.

14. Brutal elegance

Original pipe legs.

An affordable option for making legs for a coffee table is ordinary plastic or metal pipes interconnected by fittings. Such furniture will perfectly fit into the interior in loft style.

15. From an ordinary wooden beam

Wooden table from a bar.

A wooden beam, folded in a checkerboard pattern, will become a countertop for a homemade coffee table. Legs can be made of thick metal wire.

Categories

Popular