Homemade from a tank from a washing machine. What to do with an old washing machine. Helping the gardener
Everything breaks sometime. Washing machines and refrigerators are no exception. If your equipment has already definitely fallen into complete disrepair and cannot be repaired, do not rush to throw it in a landfill. There are many options for using old washing machines and refrigerators, both quite practical and decorative.
Flower pot from the drum of an old washing machine. It is quite nice and roomy, it is not afraid of moisture, it will last a long time, because metal is a very reliable material. You can paint such a flowerpot for plants in any color.
The whole washing machine became a flower bed, even a container for powder and rinse aid was used. Of course, such an object looks household appliances surrounded by greenery is strange, but overall a very interesting option, original item landscape design.
The most popular way to use an old drum from a washing machine is a brazier. You can cook on wood and coals not only shish kebabs, both a pot and a frying pan will conveniently stand on top. At the same time, it is very simple to make such a brazier.
This is already an improved version of the brazier from washing drum, on a tripod. By the way, the design turns out to be quite light, it is easy to carry around the site. As an option, it was possible to equip a stationary place for an outdoor hearth by arranging a convenient platform around the drum.
And who will say that it is ugly - reflections of the flame in the holes of shiny metal. Such a brazier does not look at all like an old and useless thing, but an actual and practical element household plot.
From a very old washing machine, or rather, its rounded metal case, you can make a smokehouse for fish and meat products.
This is how the drum of a washing machine, which a designer or a house owner with a rich imagination has worked on, can look elegant. By the way, in the empty case of such a pedestal-seat with a soft pillow, it is quite possible to store all kinds of little things.
And again a flower bed in a whole washing machine. Beautiful bright petunias smoothed out the brutality of the plain metal body of the equipment, which obviously served for many years until it turned into a flower bed.
Wardrobe in an old refrigerator. The case was painted, there are few shelves, but they are quite roomy, and various little things fit in the former freezer.
Even if the refrigerator itself refused to freeze, this cannot prevent you from using it to cool drinks during an outdoor party. A simple wooden plank finish looks quite attractive, and the ice under the now hinged lid will last for a long time.
An incubator in an old refrigerator case. It will retain heat, especially if it is additionally insulated, you only need lamps for heating eggs and a thermometer to control the temperature. A good option for those who want to start breeding chickens.
House for puppies. It turned out a separate bed and dining room. For a larger dog as bed the case of the refrigerator would also fit, you just need to remove the shelves.
A chest for potatoes and other vegetables. If there is no cellar - a good place for storage. A refrigerator dug into the ground will heat up and cool slightly, less likely that the potatoes will germinate or, conversely, freeze.
We will send the material to you by e-mail
Scrap metal collectors will be just happy to take your old washing machine. But do not rush to please them. You will get a little money for scrap, but if you approach this issue wisely, you can get a lot of useful things for household. Homemade products from a washing machine engine will help you quickly clean a bird from a feather, cut pet food, mow a lawn, smoke fish and meat. And this is not a complete list of what can be made from a washing machine. Today, in the editorial review of the site, detailed instructions on how to give the “iron heart” from the washing machine a new life.
Parts from a washing machine - material for many useful homemade
If you are going to make homemade products from a used engine, you need to figure out what it is and what it is capable of. In you can find three types of motors: asynchronous, brushless and collector. Let's take a closer look at them:
- Asynchronous– can be two-phase or three-phase. Two-phase engines are found in older models of Soviet production. More modern machines are equipped with three-phase. The design of such an engine is extremely simple, it can reach speeds of up to 2800 rpm. The working engine removed from the machine just needs to be lubricated - and it is ready for new exploits.
- Collector- you will find this type of motor in the design of most household appliances. Such devices can operate from constant and alternating current, have compact dimensions and controlled speed. The only drawback of such an engine is the washable brushes, but these parts can be replaced if necessary.
- Brushless direct drive- the most modern engine from Korean manufacturer. You will find it in modern washing machines from LG and Samsung.
| Illustration | Action Description |
|---|---|
 | To firmly fix the engine on the workbench, make fasteners from a metal corner. To do this, drill holes for fixing to the motor legs and the table. |
 | To fasten a wooden part, you will need a flange fixed on the motor shaft, and these are the studs made from ordinary bolts with cut heads. Screw these pins into the base. You will need 3 pins. |
 | The motor is fixed to the table with self-tapping screws, to the metal part - with bolts. |
 | The opposite end of the wooden part is attached with such a device. It consists of a screw with a loop, two wooden stands perpendicularly fixed to the corners. |
 | This wooden part must be movable so that different blanks can be used. For mobility, it is mounted on a threaded stud with bolts. |
 | To control the motor, you need a power supply. You can use one of the computer blocks. You will need to install switches to adjust the rotation speed. |
 | How to connect the motor to the power supply in animation. |
 | To guide the tools, make a tooltip. It consists of two wooden parts and metal corner. All parts are movable due to fastening with one bolt. |
 | The lower part of the handrest is rigidly fixed on the workbench using self-tapping screws and corners. |
 | The workpiece is fixed on the machine from two sides: on the left - on studs, on the right - on a bolt with a handle. For fixing in the workpiece, you need to drill the appropriate holes. |
 | To work, you will need sharpened tools - cutters. |
 | The final polishing of the workpiece is done with a strip of sandpaper. |
How to make a simple removable machine for home use from a washing machine
The time of slaughtering a bird is a troublesome stage. This is usually done in the fall, when ducks and broilers have reached the desired weight, and it is no longer profitable to keep them in winter. You need to pluck several tens or even hundreds of carcasses very quickly. You can get rid of hard labor with the help of a removable machine, and it’s easy to make everything from the same washing machine parts.
For the device, you can not disassemble the washer. It is especially convenient to use machines with vertical loading. You just need to fix the beaters in the drum so that they look inward. Before plucking, the chicken carcass must be scalded with boiling water, and then simply thrown into a rotating drum. Here's what happens:
Important! To prevent water from getting on the engine of the pickup machine, you need to protect it with a plastic casing.
And the last point - the pen-removal device must be firmly fixed, since the vibration when loading the carcass will be very strong.
Used lawn mower
We continue to look for an answer to the question of where you can use the motor from washing machine. Another original idea is manufacturing. For small area quite enough electric model tied to a power source with a cord. The device of such a unit is very simple. You will need to make a platform on four wheels with a small diameter.
The engine is fixed on top of the platform, the shaft is threaded into the hole below, and a knife is attached to it. It remains only to attach handles and a lever to turn the power on and off. If you have an asynchronous motor lying around, you will be surprised how silent the unit will turn out, even in comparison with factory models.
Advice! To prevent grass from wrapping around the knives, you need to slightly bend them cutting edges way down.
Video: how to make a lawn mower
Animal feed cutter
For a villager, a feed cutter is a very important device in the household. And this unit is easy to make from. What can be used: a drum and a motor.
For a feed cutter, you will need to make a housing in which a drum with holes sharpened for cutting and a lid for pressing will be attached. The connection of the rotating drum and the motor is carried out through the drive. Finished model looks like that:
How to assemble a generator from an old washing machine
We continue to consider homemade products from the motor from the washing machine, and the turn has come to the generator. You won’t be able to assemble a powerful device, but you can prepare well for the event of an emergency shutdown. To turn the engine into a generator, you will have to disassemble it and partially cut off the core. In the rest of the core, you need to make grooves for neodymium magnets.
The gaps between the magnets are filled cold welding. For the device to work, the kit must include a motorcycle battery, a rectifier and a charge controller. Details of the work in the video:
Homemade concrete mixer
If you started a small repair, requiring, for example, plastering the walls, a concrete mixer will come in handy. And again, the parts of the washing machine come in handy.
As a container for concrete, you can use the same drum with pre-sealed holes for draining water. It is best to use parts from a front-loading machine, there is almost nothing to be redone. To strengthen the body, use a metal corner, and for convenient movement of the concrete mixer, equip it with wheels. The main difficulty in the design is the manufacture of a "swing" for the correct tilt and subsequent draining of the concrete. How to do it right in the video:
Homemade products from the engine from the washing machine: a circular saw
You will be surprised, but a circular can also be built on the basis of a washing machine motor. Important point in this matter - additional equipment of the motor with a device that regulates speed. Without it additional module the circular will work unevenly and simply will not cope with the task. Device Assembly Diagram:
The principle of operation of the device is simple: the engine drives a shaft on which a small pulley is dressed. From the small pulley there is a drive belt to a large pulley with a circular saw.
Important! When working with a homemade circular, take care of your hands. All parts of the structure must be firmly fixed.
The resulting unit will not be very powerful, so it can only be used to dissolve boards up to 5 cm thick. How such a homemade circular works:
What else can be done from a washing machine drum: original decor ideas
The drum with its correct perforation is a material for making decorative items. Here are some interesting ideas.
Bedside tables and tables. In drums with a door from machines with vertical loading, you can hide the necessary little things.
We make a brazier from a drum from a washing machine, photo examples
- The item is temporary. Sooner or later it burns out and needs to be replaced. You can buy a new one every time or use improvised material, for example, a drum from a washer. Make this craft from a drum from a washing machine - a couple of minutes. The beauty is that oxygen easily enters the perforated container, which causes active combustion.
The metal of the drum will be able to withstand a couple of seasons. Do it for him convenient stand so that you can not bend over, and you're done. Skewers of standard length will fit comfortably on a small brazier. If necessary, you can lightly weld a pair of guides by welding.
How to make a good smokehouse from a washing machine drum
Cherry on the cake in our question -. Fragrant smoked meat, bacon and fish - what could be better for the table? If you have a tank from a top-loading machine lying around in your barn or garage, consider it a hat.
In the bottom of the tank, it is necessary to cut a hole for the firebox, weld fasteners for hanging products inside. It remains only to install the tank on the hearth, hang fish or lard, cover the tank with a lid on top and set fire to the sawdust.
It is important that the fuel under the smoker smolder, not burn. Such a device is best located away from home.
Important! You will have to look after such a smokehouse. It cannot be left for a long time, the fire may flare up, and instead of smoked, you will get a burnt product.
If your household appliances are broken, then do not rush to throw them away - many useful things can be made from its parts, even fashionable furniture. We will offer many original variants what you can do from the details with your own hands.
Useful Mechanisms
First of all, you can use spare parts from an old washing machine for the manufacture of mechanisms useful in the household.
Grinding and cutting machine
It is quite simple to give a second life to the electric motor of household appliances - its power is quite enough to make a grinder. Difficulties for home master there are no special ones here: fix the engine case on a powerful wooden base (a piece of board is suitable), connect the start and shutdown button, make an adapter nozzle on the shaft, where a grinding or cutting wheel will be attached. You can see other homemade products from the engine from the washer.
Smokehouse
Many people dream of their own smokehouse to surprise their friends with smoked meats, but in a city apartment there is nowhere to install it. We offer a variant of a mobile analogue - it is made from the drum of a washing unit. We fix a thin sheet of steel in a circle so that the smoke does not escape through the perforations, and insert a special grate into the middle, where fish and meat will be laid out for smoking.
From above, a hole is made for the pipe, where the smoke will go out, under the grate we lay out wood blocks or chips from oak, alder, cherry or apple tree. The main task is not to overdo it, the volume of the smokehouse turned out to be small, so you don’t need to put a lot. It is better to find out the norm in advance empirical method, from smallest to largest. Experts in this case assure that five small bars or dry branches are quite enough.
For those who breed poultry for subsequent sale in the markets of cities, such an improvement will appeal to them. We mean assembling the pen-removing machine on our own. It works in the same way as the factory counterpart, only it looks less aesthetically pleasing, but many times cheaper.
The principle of operation is not particularly difficult:
- A rather capacious tank is studded with special rubber pins (blow bars) with a threaded connection at the end, for a tight and reliable connection with the body.
- The bottom rotates at high speed and is also studded with rubber beaters.
- A bird carcass scalded with boiling water is placed in the tank: chicken, goose, duck or broiler.
- When turned on, the bottom rotates, the beaters make the carcass move quickly around inner space, causing the feathers to fly off in different directions.
- In 2 minutes, the carcass is cleaned, only minor residues remain in the area of \u200b\u200bthe inner part of the wings, tail and paws.
On the example of some farms, up to 30 carcasses can be plucked in this way per hour.
Amateurs believe that carcasses are damaged during mechanical plucking, but in practice their presentation is 100% preserved.
The tank is located horizontally, water is supplied, as shown in the photo. A tap is made from below to remove water and feathers, so the bottom is slightly smaller than the diameter of the drum. The supply of water has a beneficial effect on the entire process of mechanical plucking.
The most cost part- purchase of pins made of durable rubber: the cost of one is at least $ 1.5, and they need at least 120 pieces, but the costs will quickly pay off.
Interior details
We have listed far from everything that can be made from a washing machine with great imagination and certain skills. If you don’t need a lathe, then there are many ideas for using parts from an old washer in the interior of an apartment and a private house - you just have to choose the most suitable one.
sealed door
The loading door from the machine can be adapted for a window in wooden frame- Looks unique and practical. To do this, you just need to cut the door along with part of the front panel of household appliances - the original is ready porthole that fits into almost any interior.
If you live in the private sector in your own house, and there is a shaggy guard in the yard, then he booth you can insert the door from the machine, through which very coldy he will see everything, but be in a warmer room. With the help of such a homemade product, you can isolate the formidable watchman during the arrival of guests - he sees everyone, but is not able to bite or tear clothes.
It must be remembered that the hatch is airtight, so make side holes to ventilate the booth.
With the help of a drum of stainless steel with an abundance of perforations, you can change the interior of your apartment beyond recognition: make a unique Coffee table in fashion style hi-tech. Can decorate it internal illumination from LED garland to save electricity - it's simple, but it looks original and very unusual.
This is easy to do: you just need to attach a few steel studs to the drum body. Attach a Plexiglas top to the top or MDF boards. A piece of furniture made in this way will decorate the interior of your living room.
Unique puffs
Fantasy has no limits - with a certain skill and imagination, you can make various puffs from a drum in a children's room. We take a colored pillow and cut out a square of the same size from the chipboard, then we fix the pillow on the square with a stapler.
to chipboard and outer wall we fix the halves of the card loop with self-tapping screws and screws, paint the side surface of the drum with bright paint - a unique pouffe with a hinged lid is ready, and inside the children can store small toys and things.
Such original stainless metal poufs will last for many years when the children grow up, they can be covered with discreet fabric and placed in the living room.
Lampshade in the nursery
To completely change the interior of the children's room with the help of the original homemade lampshade from drum from an old washing machine, do the following:
- from any non-combustible, non-conductive material (textolite, ebonite), we make a circle half the size of the diameter of the drum;
- then we cut a hole for the cartridge and the connection wire;
- insert the cartridge into the prepared hole, fix the circle on back wall drum, we bring the wire out;
- we screw three special hooks into the ceiling, as shown in the photo;
- we attach special cables to the drum body, on which the entire structure will hang;
- hang the assembled structure;
- we connect the wire from the chandelier to the terminals of the cartridge;
- we screw the light bulb through the receiving hole of the drum - everything is ready.
To dim the light and create fabulous interior inside, multi-colored light fabric can be attached to the walls.
In the country
If you possess personal plot you can use one of the ideas below. Their implementation does not require special skills and does not take much time.
Helping the gardener
Here, the old drum can be used to wash vegetables or mushrooms grown in the garden beds. The container is placed above gutter, the harvested crop is laid through the linen hole, we pour it from the top with a hose, and from below the dirty water leaves by gravity through the perforations. original design works like a colander in the kitchen, only much bigger size- at the entrance we get clean vegetables or mushrooms, quickly and without any hassle.
Many gardeners use the drum as growth limiter fruit bushes or protecting the root system of rare flowers from pests - not a single rodent will overcome the steel protection, and excess moisture will leave through the hole system.
Can be made unique flower bed, decorating the sides with fragments ceramic tiles different pattern-beautiful and unusual.
We make a brazier
The drum body is made of stainless steel, and it is resistant to high temperatures, so you can make an original rotating brazier, especially since there are already perforations for blowing on all sides. We take old pipes, if we don’t have our own welding, then we invite a neighbor - and in half an hour we have a brazier for barbecue in our yard. So that the weather does not spoil the holiday, we build a strong canopy from the rain from above.
Brazier yourself is quite simple to make from a drum from frontal machines, with a vertical laying of linen - you need to make small improvements: cut off the side with a grinder, and add a stable support from below.
From a drum and an electric motor from household appliances, you can make a concrete mixer, a juicer, a universal sterilizer for home preservation, a grass grinder and cereals for feeding poultry - there is no limit to fantasy.
For the implementation of grandiose projects, anyone can find the information, diagrams and detailed drawings with an algorithm of step-by-step actions on the Internet. Each user in the event of a failure of the washing machine can independently figure out how to organize a second life for her.
In some situations, it is cheaper to purchase a new product than to restore failed household appliances. However, a prudent person will receive additional benefits by using functional components for their intended purpose. This publication presents homemade products from the engine from a washing machine .. And video clips will help to more accurately reproduce homemade craftsmen and get useful products quickly and at no extra cost.
Read in the article:
What is the engine from an old washing machine suitable for?
First you need to clarify the real capabilities of the existing power unit. In household appliances of the Soviet period, fairly reliable asynchronous electric motors (180–220 W) were installed. They were connected to two-phase AC networks. Previously, structures were created in a collapsible version. Therefore, in the event of a breakdown, repair does not cause excessive difficulties. The only exception is winding damage. Modern models are characterized by increased power (up to 340 W).
Since the late 90s of the last century, such simple engines have not been used. Instead of asynchronous, collector units are more often used. They are smaller and weigh less. In the corresponding modifications, the following possibilities are provided:
- DC power connections;
- smooth speed control.
To supply current to the rotor part, graphite rods with spring pushers are used. These parts must be replaced periodically. The power of collector-type electric motors ranges from 340 to 780 W at a speed of rotation of the working shaft in the range of 11400–15200 rpm.
The photo shows the power unit, which was first used by the engineers of the famous South Korean brand LG. It is often called an inverter, since it is supposed to be possible to smoothly adjust the speed (up to 2 thousand per minute) using an external control device. The power of such units exceeds 500 W, which allows you to connect it directly to the drum shaft without a special belt drive. The following parameters and features of the motor from the washing machine determine where this power unit can be used:
- power;
- speed of rotation of the working shaft;
- dimensions;
- power supply and control circuit.
Note! More attentive people pay attention to maintainability, reliability, resistance to external influences. They study the opinion of experts in specialized forums, official manufacturers' guarantees.
What can be done from an old washing machine: examples of work with comments
The information below will help you realize different projects based on the respective power unit. Here are the current homemade products from the motor from the washing machine, which performed well during practical tests. Attached to some projects step by step instructions with detailed explanations of the assembly process.
How to make a grinder or sharpener from a washing machine engine
| Illustration | Action Description |
 | First of all, we will determine which interchangeable nozzles will be used in practice. The features of processing processes are of significant importance: the duration of cycles, the hardness of the material of the workpieces, etc. |
 | In this version, the author uses grinding discs 200 mm in diameter with an adhesive layer on the non-working side. He picked up a nozzle of approximately the same size from a “grinder” (175 mm) with a threaded connection in the central part. |
 | To implement the plans found old engine washing machine that rotates the armature at speeds up to 1500 rpm. In the photo, the arrow indicates the starting relay, mounted on the case. Food - from the alternating current network 220 V. |
 | On the lathe created a special nozzle. It is attached to the 14mm shaft with a screw. A threaded rod is welded to the end of the part, which corresponds to the connecting node of the adapter. |
 | During practical tests, it became clear that the initial rotation does not correspond to the direction of the thread. This means that when performing work operations, the nozzle will unscrew. The author did not use a special electrical circuit, but swapped the housing covers along with the bearing. |
 | For reliable fastening of the power unit, a special bed was created from steel corners. Welded joints cleaned. At the final stage, the product is covered sequentially with a primer for metal and paint. |
 | Using screws, a table (1) equipped with a rotating frame is connected to the frame. A support rod (2) with height adjustment is installed in the center. With its help, the exact angle necessary for working with workpieces is set. |
 | The assembly confirmed the accuracy of the calculation and individual parts. To eliminate errors, it is necessary to prepare a set of drawings in advance. It is not necessary to comply with engineering GOSTs. However, it is necessary to carefully understand the features of each component of the structure, note the dimensions and landing dimensions. |
 | Practical test shows good functionality new machine. Power is quite enough for processing duralumin blanks. An additional plus is the quiet operation of the washing machine engine. |
 | For the collection and disposal of waste, a special box was made with an outlet pipe for connecting a vacuum cleaner. It is installed at the bottom of the bed under the working area. |
Note! According to this algorithm, it is easy to create a high-quality grinding machine from a washing machine. To increase safety, it is necessary to use individual protective equipment. A transparent polymer shield covering the work area is also useful.
Wood lathe
It is not too difficult to create a sharpener with your own hands from a washing machine. However, the following example demonstrates the relative ease of manufacturing more complex equipment.
Since applied asynchronous motor from the Vyatka washing machine, a capacitor is installed in the power circuit. The armature of this power unit rotates at a speed of 400/3000 revolutions per minute. To set the axle parallel to the frame parts, washers of the appropriate thickness are selected.
lawn mower
The picture highlights important details:
- These rods (1) must have sufficient strength, since the movement of the equipment around the site is carried out manually.
- The engine switch from the washing machine is installed near the handle for the convenience of the user. For connection use a wire (2) with high-quality insulation. Provide good sealing of electrical components so as not to create emergencies in conditions of high humidity.
- Belt drive (3) reduces vibration. By changing the size of the pulleys, they select the optimal speed of rotation of the knives.
- Such nodes (4) are used to adjust the clearance, the height of the lawn mowing.
- Large wheels (5) are useful for overcoming obstacles on the land.
feed cutter
How to turn the engine from an old washing machine into a generator
However, to obtain such a result, it is necessary special training. A recess is made at the end of the rotor. It is fixed in it permanent magnets. The upgraded part is installed in place. To accumulate the received energy, a rectifier and a battery are used. These units are connected via a controller to optimize the charging process.
Concrete mixer
Here, two belt drives are supplemented by a gearbox. In the complex, it was possible to create the necessary torque with a relatively low power of the electric drive.
A circular saw
What can be made from a washing machine drum: simple designs
In practice, not only the engine from the washing machine is useful. What can be done from the drum is described in the following sections of the publication.
Brazier from a drum from a washing machine: photos and useful tips
The stainless steel grill looks great. It retains functional characteristics and impeccable appearance for a long time. It is easy to clean from contamination. There are no sharp corners and other potentially dangerous parts. Suitable for high temperature resistance. Light weight means no difficulty in moving. Most suitable blank- a drum from a top-loading washing machine. It has special doors that close the firebox, regulate the air flow.
Can a smokehouse come out of a washing machine drum
For processing, meat, fish and other food products are placed for a long time in a closed container, where a high concentration of smoke is maintained. Apply low- and high-temperature technology. In any case, a good tightness will come in handy.
Weld all excess holes. Install a smoke outlet. Inside, lattice shelves and suspensions are mounted to place products.
Decorative and functional crafts from the washing machine drum
These pictures show examples of products that can be created quickly and efficiently without detailed instructions:
How to create a do-it-yourself removable machine from a washing machine: using a few pieces of old equipment
The photo shows what can be done from an activator-type washing machine. After a significant alteration, a convenient device will be obtained that will help automate the tedious process of processing poultry before selling ( long-term storage). Such equipment is used to solve domestic and commercial problems.
A similar design is created from a washing machine. Rubber pins (beats) are inserted into the walls of the tank and the disk installed from below. When the bottom part rotates, these elastic elements tear off the feathers from the carcass. To increase the efficiency of the process and remove debris, watering is used from the top side of the tank.
Homemade products from the engine from the washing machine: conclusions and additional information
In any case, even when working with a relatively simple design, you should prepare project documentation. This will simplify the search for additional components, prevent assembly errors. Use the comments to post your own ideas and get answers to additional questions. With the help of our online magazine, it is easy to draw the right conclusion about what to do with the old washing machine after the end of the intended use of the technique.
The video demonstrates the principle of operation and features of the picking machine:
Sooner or later, the time comes when the washing machine, which has served faithfully for many years, breaks down and cannot be repaired. Therefore, a new car appears in the house, but the question arises: what to do with the old one? There are several solutions to this problem. Old equipment can be scrapped or given a new life by converting it into various fixtures and items for home use.
According to modern standards, overall equipment cannot be simply taken out to the trash. There is a fine for this. Large household appliances are supposed to be disposed of in special places and you have to pay for it. Disposal of one washing machine can cost 1500-2000 rubles. This amount includes the actual price of the disposal itself, the services of loaders and transportation. It should be noted that this method of getting rid of old home appliances is the most expensive.
If the car is still running or able to work after a simple repair, then you can advertise in a local newspaper or on the Internet and try to sell it for not very high price. Some of these machines are purchased by those who live in a hostel or in a rented apartment. In some cases, old machines are bought by home appliance repairmen to be dismantled for parts. You should also pay attention to promotions in large supermarkets of household appliances. Sometimes promotions are announced in them, during which old equipment can be returned in exchange for a discount on the purchase of a new one.
You can give away an old washing machine for free, but with the condition of pickup. In many cities there are companies that take out all kinds of rubbish from apartments for free. They then disassemble the equipment in order to turn it in for scrap, but the main thing for the owner is that the problem with disposal will be solved without extra costs. Old washing machines in working condition are very often taken away by nursing homes, orphanages and charitable organizations.
Machine dismantling
Many home craftsmen are trying to find a new use for obsolete things. From individual parts of an old washing machine, you can make a lot of useful things for a summer residence or home interior.
What spare parts can be used:
- engine. If the engine is in working condition, then it can become the basis of various mechanisms for home use;
- drum. It is made of high quality stainless steel, because it takes the main load during washing. Since stainless steel is very durable material, then it can serve for many more years in some new image;
- hull and loading hatch. You can also make many useful things for the home from them;
- there will always be an application heavy counterweights, and powerful springs, and various small details;
- analog board can also come in handy, since it contains a lot various elements necessary for the repair of household electrical appliances.
Washing machine grinder
The power of the electric motor of the washing machine is quite enough for a home grinder with which you can sharpen knives and garden tools.
The installation of the grinding machine is carried out as follows:
- the engine must be securely fastened. This is best done on a small board. The engine mounted on the board can then be easily installed on a workbench, table or any other surface;
- for fastening the engine, you can use corners or circular clamps made of galvanized steel strips. For electrical insulation and vibration compensation, rubber is laid between the fasteners and the engine;
- asynchronous motors used in older drum washers have an open design, so moisture, dust or sawdust can get into them. This can cause electrical shorts and malfunctions of the different type. Therefore, when mounting the engine, it is better to completely cover it with a strip of galvanized steel.
There are several ways to connect a chuck for a grinding tool or a clamp for a grinding wheel or stone:
- cut the thread for fixing the chuck directly on the motor shaft;
- weld the adapter using pipes of different diameters. The diameter of one end of the adapter must correspond to the seat diameter of the grinding wheel, and the other end to the diameter of the motor shaft.
It should be noted that the best option is a drill chuck that can hold almost any tool: a cutter, a drill, a round grinding head, a wire brush attachment for stripping paint, etc.
A grinder based on an engine from a washing machine can be assembled even by a novice master. The main thing is to connect the engine correctly and create a reliable mount for the working tool. I would also like to note that if a high-speed engine is used, then it is better not to reduce its speed, but to make a separate block with its own shaft, to which the torque can be transmitted using a pulley with a reduction factor.
On the basis of a grinding machine, you can also do:
- wood lathe. With the help of such a machine, you can slowly and without much effort process wooden cylindrical blanks. In this case, to stop the workpiece, you will need something like a tailstock;
- drum grinding machine . To do this, use a wooden cylinder large diameter. A steel bar is placed in its center. One end of this rod is mounted in the engine chuck, and the other in a special stand with a bearing. The surface of the cylinder is pasted over with sandpaper. With this device, you can sharpen knives or planer blades, and if you have a device for holding the angle, you can perform other operations.
Pen removal machine
Such a machine will appeal to those who breed poultry with its subsequent sale in urban markets. Homemade car works on the same principle as the factory one, but only looks less aesthetically pleasing and costs many times cheaper.
To make a feathering machine, you must first install a steel disk with a diameter slightly smaller than the tank diameter and 3 mm thick at the bottom of the tank. This disc is mounted on the drive shaft of the machine. Holes are drilled in the disk and special rubber fingers are inserted. It is these fingers that are the most expensive elements. future design(1.5-2 c.u. per piece). On average, they will need 120-150 pieces. The diameter of the rubber fingers depends on the type of bird that will be plucked.
Holes are also drilled in the side walls of the tank body, into which pen-removable (beating) fingers are installed. The distance between the finger holes should be 3-4 cm, and the distance from the top of the tank to the first row of holes should be 15 cm. All other components of the washing machine, including the motor, can be left unchanged. The drain hole does not need to be plugged. Through it, water flowing from the carcasses will be discharged. The bird is scalded with boiling water, placed in a tank and the engine is turned on. After that, the rubber fingers remove the pen very cleanly and quickly.
Concrete mixer
This is a rather complex device, which should provide both concrete mixing and its unloading. The easiest way to make a concrete mixer out of a barrel washer is to replace the standard activator with two U-shaped blades. They can be made from a steel strip 4-5 mm thick. To do this, cut off two pieces of the strip of the desired size, bend them and place them perpendicular to each other. Then the blades must be welded to the shaft, passed through the hole for the remote activator.
Each barrel washer has a drain hole. In the manufacture of a concrete mixer, it must be drowned out. Then they proceed depending on the volume of concrete that needs to be kneaded. If this volume does not exceed one bucket, then you can leave the old single-phase motor from the machine in the concrete mixer.
If it is planned to knead a larger volume of concrete, then instead of the old engine, you will have to use a more powerful one (0.8-1.5 kW) and with low speeds (1300-1500 rpm). Besides, native belt drive must be replaced with a gearbox that reduces engine speed to 25-30 rpm. It should also be noted that for better mixing of concrete, the option is more suitable when it is not the shaft with the activator that rotates, but the body of the concrete mixer with the blades fixed in it.
Canning Sterilizer and Juicer
You can make a sterilizer from an old barrel washing machine, in which up to ten cans can be placed for heat treatment.
Alteration is carried out in the following order:
- a plug is placed on the opening of the activator;
- a thick wire mesh is installed at the bottom to locate the cans;
- it is necessary to substitute a support under the grid;
- a hole is drilled in the body, into which a 2 kW electric boiler is then inserted.
Juicer can be made from old car with a washing compartment and a centrifuge or from a conventional drum machine. The first option is preferable, since it allows you to implement two processes in one device: chopping fruits and vegetables and squeezing them. For a juicer, a machine with an activator on the side wall is better suited. The activator is replaced by three homemade knives made from strip steel.
The drain hole in the washing tub must be plugged and side surfaces close the centrifuges with a stainless steel mesh with a mesh size of 1.5 mm. For the manufacture of mesh, you can use a wire with a diameter of 0.2 mm. Making a juicer from a washing machine-barrel or machine is somewhat more difficult.. The "stumbling block" in this case can be a homemade centrifuge. It will not be difficult to make it, but it is very difficult to achieve perfectly accurate centering. An incorrectly set centrifuge at high speeds begins to vibrate strongly, so it will be impossible to squeeze the juice.
The principle of operation of a homemade juicer is quite simple. Fruits or vegetables are washed and loaded in small portions into a washing tank (approximately 0.5-1 bucket). Knives must be turned on. Grinding of fruits is carried out for 15-20 minutes. Then the crushed mass in portions of 3-4 liters is transferred to a centrifuge and the juice is squeezed out.
Brazier and mobile smokehouse
The body of the washing drum is made of durable and high-quality stainless steel that can withstand very high temperatures, so it can be converted into a barbecue. To do this, the drum is removed from the machine and legs made of metal rods or small pipes.
If you cut a small opening in the bottom of the tank (about ¼ of the tank diameter), and drill a hole in the side (where the bearing is located) and install the engine in it, then you can get a grill. The coals will heat it, and the spit will rotate with the help of the engine.
You can also make a smokehouse from the drum. In it, you must first plug all the holes. They can be brewed, but it is easier to close them thin sheet metal. A door should be cut in the drum. If a tank from a top-loading machine is used, then the door is already available. Holes are cut in the top of the tank through which smoke will escape. A grate is installed inside the tank, on which products for smoking are placed.
Interior elements
From the drum of a washing machine you can make a spectacular coffee table in trendy hi-tech style. To do this, you need to fix a table top made of MDF or plexiglass from above. Inside the drum, you can place the backlight from the LED garland. Such a table looks very original and is able to change the interior of the room beyond recognition.
You can also make original puffs from the drum. In this case, we paint the side surface of the drum with bright paint or cover it with a beautiful fabric. From above we fix a wooden seat cut from chipboard. We attach the seat to the side wall of the drum using furniture hinges. On the seat with a stapler we fix the pillow in a bright or, conversely, inconspicuous cover.
It all depends on your taste and overall design rooms. The seat can be made folding and then various things can be stored inside the pouffe, for example, magazines or children's toys. Homemade poufs can be complemented with a spectacular floor lamp or lampshade, also made from a washing machine drum.
To turn a drum into a lampshade, you need to do the following:
- we make a circle from any non-combustible and non-conductive electric current material (ebonite, textolite). The diameter of the circle should be half the diameter of the drum;
- in the middle of the circle we cut a hole for the cartridge;
- insert the cartridge into the prepared hole and fix the circle on the back wall of the drum. We bring out the wire from the cartridge;
- we screw three hooks into the ceiling;
- we fasten special cables to the drum body;
- we hang the assembled structure on cables;
- we connect the wire from the chandelier to the terminals of the cartridge;
- screw in the light bulb and the lampshade is ready.
The metal base can be decorated with a beautiful fabric, decorated with wine corks or other spectacular elements.
Useful things to give
The old drum can be used in the country for washing various vegetables and mushrooms. The harvested crop is laid through the opening for loading linen, and watered from above with a hose. Dirty water exits through perforations. This design works like a colander, but much larger.
An old washing machine can be converted into a summer shower in the country or a washstand. To Sun rays could better heat the water, the walls of the tank can be painted black. If the heating element of the machine has not burned out, then it can be made from it electric water heater. Instead of a heating element, you can also use a conventional electric boiler.
From the drum of the machine you can get a beautiful flower pot. To do this, the side surfaces are decorated with fragments of ceramic tiles or simply covered mounting foam, which is then dyed bright color or even multiple colors. On the painted foam, you can still stick various decorative elements, for example, bows or butterflies.
The body of the old washer can also become an original flower bed. In this case, flowers can “leak out” from the open laundry hatch, crawl out of the detergent filling hole, and even grow in pots located on the top surface of the machine.
conclusions
Many people prefer not to throw away broken household appliances, but to find new uses for them. Of course, in order to turn an old washing machine into something useful, you need to have some skills and stock up on the necessary tools. In the issue of homemade products from the washing machine, a lot depends on the imagination of the performer. Some see it as a booth for their beloved dog, while others see it as an original locker or even a machine for plucking feathers from poultry carcasses. So don't be afraid to experiment and create your own design ideas.