From what the earth grows moldy in flower pots. Mold in a flower pot: causes and methods of struggle

Mold is different. If you suddenly find mold in a flower pot, then you need to take immediate action. One of its fairly common species remains white, which often affects flower pots. Almost every beginner florist sooner or later faces a similar problem.

mold in a pot is not uncommon

It is important to know why mold appears in a flower pot, how to get rid of it, and how to prevent it from reappearing. To answer all these questions, it is necessary to go a little deeper into the distribution of characteristic light spots.

Why does mold form in a pot?

As mentioned above, there are a sufficient number of different types of fungus:

Black mold. Most often it affects the walls and ceiling in a house or apartment.
Blue mold. It mainly attacks wooden items.
Mold rot. It can occur both in wood and in ordinary foods.
white mold. It is she who appears on flower pots. Because of it, the ground under the flower is covered with characteristic light or grayish spots.

When a whitish coating appears on the pot or directly on the ground under the flower, it is necessary to take appropriate steps as quickly as possible to eliminate it.

main reason similar situation over watering remains.

When a flower receives too much water, it does not always have time to absorb it in time. Then there is another watering, again and again. Constant accumulation of excessive moisture, insufficient drainage and blockage of the lower holes in the pot lead to the fact that a favorable microclimate is created under the plant for the development of mold.

Poor air and water circulation are the conditions that remain ideal for the growth of the fungus.

However, not all white mold is harmful spores. Some of this light coating is formed after the evaporation of an excessive amount of water. Trace elements settle on the pot and penetrate into the soil.

In this case, the water for the plant is excessive and leads to a similar result.

Why is white mold dangerous?

In any case, you need to get rid of mold on the ground in a flower pot, however, many novice flower growers do not fully understand the danger of such plant damage.

For older flowers, such a coating can be almost harmless. However, if white mold occurs on young green "pets" of a person, then very soon the young plant may simply wither.

Fungal infection changes the metabolic process in the soil. As a result, the flower will not receive the required number of trace elements and will actually die from a kind of hunger. In addition, the spores of the fungus can even physically affect the young roots, which provokes the wilting of the entire plant.

How to get rid of mold in a flower pot?

One of the most pressing questions for any grower remains: "How to get rid of mold?". At the moment, there are several simple and affordable ways for everyone. It’s worth starting from a very common one.

For its successful implementation, some additional devices and substances will be required, or rather:

New pure land of high quality.
The flower pot is smaller than before.
Water, settled for 2-3 days and filtered.
A little citric or oxalic acid.

You can get rid of white mold in a flower pot using the above devices in several stages:

You should start by changing the watering regime. You can replace frequent but small portions of water with a rare but plentiful drink for plants. The reason for the appearance of plaque is often excessive moisture, which, evaporating, creates an appropriate picture on the pot.
If adjusting the watering mode did not solve the problem, then you can try to remove upper layer soil and replace it with a new one from a store or site. It is important to do this early stages development of the problem until mold spores have penetrated deep into the soil. In this case, it will be necessary to transplant the flower into a smaller pot with new and clean soil.
An old vessel for a plant must be thoroughly rinsed with hot (boiling) water and cleaned very carefully. If possible, it is best to boil it entirely in a saucepan. At the bottom of the pot, you need to pour a little ground brick to ensure normal drainage. For this purpose, ordinary gravel is also suitable. All holes in the vessel must also be thoroughly cleaned.
Before filling the pot with earth, it should be properly processed. Sometimes even the soil sold in stores remains contaminated with spores and harmful microorganisms. To eliminate them, you can ignite the earth in the oven or steam it over boiling water until it becomes hot. Thus, it will be possible to destroy harmful microbes and fungi in the soil.
For watering plants, you should use only water that has settled for 2-3 days. Some flower growers like to add egg shells to such a liquid for better irrigation mineralization. Do not use tap water for flowers. It contains a lot of unfavorable trace elements that damage root system plants.
To improve the quality of the soil, once a month it is recommended to water the flowers with water with the addition of citric acid at the rate of 2 drops per 1 liter.
In order for the flower to feel comfortable in the room, it is advisable to monitor the overall humidity. This will be beneficial for both the plant and its owner.

In addition to such a set of measures to remove white mold, there is another good way. It provides for the additional use of Fundazol. This tool qualitatively allows you to remove white mold without harm to the plant.

It is necessary to dilute 2 g of the drug in 1 liter of water and water the flower with this solution according to the established schedule. If the wilting process has begun, then you can additionally spray the leaves with the same liquid.

In any case, it is necessary to deal with white mold. The choice of a particular method depends on the individual preferences of each grower. The main thing is the health and beauty of all plants in the house.

mold and white coating in potted houseplants. How to get rid?

When caring for indoor plants, we often notice that mold or white bloom appears on the surface of the earth. . What causes mold in indoor flower pots and how to get rid of it is described in this article.

The appearance of mold on the ground is a threat to the health of an indoor flower in a pot, as the mold can move to the stem and cause root rot.

On the surface of the soil, there is mainly white mold, similar to white fluff. This is a type of fungus that spreads in the upper layer of the earth. This fungus is widespread and often grows in flower pots under favorable conditions.

White plaque or efflorescence is the protruding crystals of soluble salts , they appear on the surface of the earth, on the walls of the pot, on the base of the plant, they can be white, yellow or Brown. The appearance of a white coating signals a deterioration in the quality of the earth in a pot, since the roots are in unfavorable conditions, they can rot.

Why does mold or white bloom appear in flower pots?

First of all, mold in a pot appears due to mistakes in caring for a houseplant:

- Mold causes over watering . Many flower growers are afraid to dry their indoor flowers and water them often and plentifully. In constantly wet soil, mold grows quickly. Water indoor flowers after checking the soil, its top layer should dry 2-3 cm before the next watering, then there will be no mold.

- Another mistake is watering a little, but often so that only the top layer of soil in the pot gets wet. Consequently, the roots at a depth do not get moisture, the plant looks dried, and mold grows on the surface of the earth and efflorescence appears.

Properly watering a houseplant should be done in small portions of water several times with an interval of 5 minutes, until water appears from the drainage holes, which means that the clod of earth is completely saturated with moisture and you can take a long break before the next watering.

- Mold and white plaque appear due to stagnant moisture in the ground , this happens if there are no drainage holes in the bottom of the pot, there is no drainage layer to drain excess water in the soil. Leaked water in the pan after watering must be drained.

- White plaque appears on the surface of the earth when watering with hard water from the tap , salts, along with irrigation, enter the soil, and then, when moisture evaporates from the surface, they are converted into crystals.

- Mold and white plaque provokes the introduction of excessive doses of fertilizers , undeveloped mineral substances by the plant act on the soil surface, and an excess amount nutrients leads to the growth of mold.

- Mold and white bloom appears if the plant is planted in too big pot , its roots cannot master the entire volume of the earth, draw moisture and nutrients from it. Over time, unused soil becomes saline, sour and moldy.

- If you bought land and it is already moldy, then sow seeds in it or dive seedlings, you can’t transplant young plants , since the mold can move to fragile roots, stems, as a result, seedlings or seedlings will die.

How to get rid of mold and white plaque in flower pots?

1. When the ground in pots with indoor plants is covered with white fluff, they smell like rot, you should change the watering schedule and water the flowers only after the top layer of the earth dries out.

2. Loosen the surface of the earth in pots, to break up a dense crust and allow air to pass into the deep layers of the soil to the roots.

3. If there is a lot of mold, then you can get rid of it , removing the entire top layer of earth in a pot and filling in new soil.

4. It is recommended to add bactericidal components to the ground for indoor flowers - pieces charcoal and moss sphagrum have such properties.

5. The biological preparation "Fiosporin" will help against mold, which contains beneficial bacteria that prevent the development of fungi and rot. The drug in the form of a powder must be diluted according to the instructions, leave for a couple of hours and water the indoor flowers.

6. You can get rid of mold in pots with citric acid. . Dilute half a teaspoon of citric acid in a glass of water and moisten the top layer of the earth in a pot, the acidic environment is not suitable for the development of fungi and mold disappears. However, only those plants that love the acidic reaction of the soil can be watered with citric acid.

7. If mold and white plaque have covered the entire surface of the earth, then it is recommended to transplant the plants with a complete replacement of the substrate . The soil for planting indoor plants must be disinfected by steaming in the oven.

Was the article helpful? Like, write comments!

Read more about indoor plants here. Klumba- plus. en

The white mold that has appeared on the ground in flower pots occurs due to improper care or the influence of negative external factors. Plaque usually begins to spread at the points of contact between the soil and the pot. It can be white or brown and has high speed distribution.

There are always a lot of spores in the air. Under favorable conditions environment from them colonies of fungi are formed, which begin to multiply rapidly.

mold varieties

When faced with a problem such as mold in a flower pot, how to get rid of it depends on its type and causes.

black mold

Black mold is caused by high humidity. It can have different shades.

When this type of mold appears, you should immediately begin the process of getting rid of it, since it is the most dangerous for humans. Interaction with it can lead to an allergic reaction and respiratory failure.

White types of fungus

White mold often appears in the ground, on trees and plants. The most common species, which mainly appears in flower pots.

In appearance, this fungus is similar to salt spots. They differ in structure. Salt deposits are microcrystalline formations that do not lose their shape. The mold is easily rubbed in the hands.

vysoly

If plaque is seen on the soil in the form of white, grayish or green spots, then this may be efflorescence - the result chemical reactions It has nothing to do with mold. It negatively affects not only the outer part of the soil, but also penetrates into the inner layers.

Mold Control Methods

If mold has appeared in the ground and smells of rot, then it is necessary to adjust the schedule for watering the plant. It is recommended to reduce the frequency of watering and reduce the amount of liquid.. For some plants, moist soil is sufficient. Otherwise, the roots may start to rot, leading to fungal infections.

With abundant, but rare watering it is necessary to systematically loosen the soil. Moreover, deep layers should be affected. But you should be careful, as you can damage the root system.

How to get rid of mold in flower pots without harming the plant:

If a fungus is found, it is necessary to remove the outer layer of soil from the flower pot. If this is not done, then the infectious fungus will begin to spread to the inner layers, which will lead to decay and death of the flower.
Next, you need to moisten the lower layers of the soil. To do this, a glass of water with citric acid diluted in it is poured into the pot. The acidic environment does not allow the fungus to multiply, which favorably affects the growth of the flower.
The removed layer should be replaced with a new primer. It is necessary to add bactericidal agents to it, which will also act as filter components for incoming moisture. It is recommended to use additives such as crushed sphagnum and charcoal pieces.
Further, the earth is watered special composition from foundationazole: 2 grams of the product must be diluted in 1 liter of water. When the infection spreads to the plant itself, it should also be treated with a solution.

In order for soil cultivation to have an effective result, it is periodically necessary to loosen its top layer. This will lead to an even distribution of moisture and prevent its stagnation.

If the earth in the pot is covered with white mold, then it is necessary to water the plant with a solution of water with citric acid at least 2 times a month. For 1 glass of liquid, 0.5 teaspoon of acid is taken.

Video: Mold in a flower pot, how to get rid of white plaque on the ground.

Plant transplant

If mold has appeared in a flower pot, how to get rid of it quickly and effectively? in an efficient way elimination of a fungal infection is to transplant the plant into a new pot with a complete replacement of the soil. The soil should be selected taking into account all the rules when planting. For certain plants, it is necessary to find out the optimum humidity in advance.

Soil disinfection

To get rid of the infection and the smell of mold, you can disinfect the soil according to the instructions:

Separate the infected soil from the roots of the plant.
Remove the earth from the flower pot and transfer it to another container.
Put water to boil.
Pour boiling water over the soil.
Place the earth on a baking sheet and ignite in the oven.
Wait for the substrate to cool down.
Treat the pot with special disinfectant. You can also fire the pots with an open fire.
Return the soil to the pot, and plant a flower.

Purchasable funds

You can get rid of mold with chemicals. They can be purchased at flower shops.

But when choosing this method, you should consider:

type of soil;
plant features;
degree of spread of the fungus;
what fertilizers were used for tillage.

Using the wrong product can have the opposite effect.. And sometimes apply chemical reagents to eliminate moldy spots is impossible.

The advantage should be given to organic preparations that affect the soil and make it unfavorable for the development of the fungus.

Danger to plants

Why you need to get rid of mold and not allow it to spread:

The plant begins to get sick, as the mold prevents nutrients from reaching the stems, leaves and flowers..
The root system does not receive enough oxygen.
Fungus in the soil can cause various diseases flower.
Due to increased humidity, the roots of the plant may begin to rot.

If you do not fight moldy fungus, then the plant will rot and die.

Causes of the appearance and spread of the fungus

There can be several reasons why a fungus forms on the surface of the soil:

Using the wrong mode of watering the plant, which leads to stagnation of the liquid and an increase in soil moisture.
low temperature and high humidity the room in which the flower is located.
Application for irrigation of cold water.
Poorly functioning drainage system. If the holes do not match the size of the pot, then they clog. Which leads to stagnation of water in the soil. After 2-4 days, the first traces of mold may appear.
Poor quality soil.

Excessive moisture and rare ventilation contribute to the rapid rate of mold spread.. The most common time for the onset of infection is the autumn and spring periods. During these periods, the room accumulates cold air, which leads to the slow evaporation of moisture from the soil surface. As a result, there is fluid stagnation and the spread of fungal spores.

The cause of the fungus may be increased dampness in home. This may be due to a poor communication system or the presence of a basement.

Preventive measures to prevent mold

What to do to prevent fungus in flower pots:

systematically loosen the soil - these actions will provide the lower layers with oxygen and increase the degree of ventilation of the substrate;
do drainage system in accordance with the regulations;
keep plants in flower pots that have holes in the bottom required quantity and the corresponding value;
feed the soil with activated charcoal or wood ash - this will help improve the ventilation process and protect against infections.

In the absence of signs of infection for prophylaxis soil should be treated with potassium permanganate. The procedure must be carried out once a month. But do not use too concentrated solution, this can lead to the death of the plant.

Expert opinion

Vasily Dmitrievich

Local amateur gardener, as well as editor of articles site.

Another popular remedy is garlic. It prevents the development of the fungus. Garlic is cut into several pieces and placed next to the stem of the plant while watering. After the soil dries, it is removed.

Tips for preventing soil contamination with fungus

If you regularly carry out preventive measures, you can avoid such problems as mold and the smell of rot. The process of getting rid of the fungus is much more complicated and takes more time. When creating favorable conditions for the growth of the plant and acquiring high-quality soil, the probability of contamination of the earth with a fungus is minimal. Therefore, it is necessary to ensure systematic ventilation, sufficient lighting and optimal level air humidity.

Houseplants should not be in a draft. Special shelves or stands for flowers are best suited.

If there are indoor plants in the house, it is not advisable to use a humidifier. Since at elevated level humidity are created favorable conditions for the development of infection.

In order not to think about the question of how to remove mold from the ground, some tips to follow:

buy soil in specialized outlets;
before purchasing, you must read the composition of the soil;
if the substrate is too heavy, then it is not recommended to purchase it, the fungus will spread even faster in it;
before planting a plant, it is advisable to treat the soil with potassium permanganate, it will disinfect it and reduce the likelihood of a fungus.

Before breeding certain types of plants, it is necessary to familiarize yourself with the characteristics of their growth and follow the recommendations for watering them.

Many owners who grow indoor plants are faced with the formation of a fungus on the ground. If there are favorable conditions for the development of mold on seeds, earth, flowers and leaves, then it begins to spread throughout the house. Since pathogenic microflora can have a negative impact on plants and the human body, you should immediately use effective means to get rid of her.

Mold on the ground can appear for many reasons. Most often, the owners are found in flower pots or boxes. white variety fungus.

White mold appears on the surface of the soil if the room is cool enough. For example, you could often see how such a microflora appeared in basements or cellars, where it is cold and damp. The development of the colony begins after the spores fall into the ground or onto the plant itself. It is necessary that the room is constantly kept high level humidity is the main condition for the active growth of a colony of the fungus.

The reason may be the accumulation or stagnation of water in the flowerpot. A shallow drainage system in a pot can lead to clogged holes, and excess moisture will remain at the root system of the plant.

Common reasons include wrong mode watering indoor flowers or features of the substrate. The likelihood of white fungus appearing in the ground is higher if the soil is sufficiently acidic or has a lot of heavy substances in composition. White mold can appear regardless of the variety of indoor plants.

For the same reasons, mold can appear on the surface of the earth in vegetable gardens and orchards.

Video "Causes of appearance"

From the video you will learn why mold appears on the ground.

Negative effect on seedlings

Mold can appear in your home if there are fungus spores. When it enters the active growth phase, it begins to harm plants. For young seedlings, the formation of mold on the surface is very dangerous. After a while, she starts to rot. This pathogenic microflora is able to absorb a lot of moisture, depriving flowers of juices. Fungal infection reduces plant oxygen supply, impairs regeneration.

As a result, plants may die.

Effective methods of struggle

If the owners noticed that the earth is moldy, then you need to know what to do in such a situation. There are many different ways and methods for the destruction of pathogenic microflora, but their effectiveness will be influenced by various factors.

First you need to replace the infected soil with new greenhouse soil. After that, you need to carefully loosen it so that air easily penetrates into the lower layers of the soil. The frequency of watering is reduced, and a small layer of quartz sand is poured onto the surface of the earth.

removed fungus and old earth must be taken out of the apartment or garden (greenhouse).

The owners must remember that drying the earth does not guarantee the absolute result of getting rid of the fungus. If mold has appeared, then it is not easy to destroy it. Drying may give a little time, since during this period the colony of microflora will stop spreading.

A certain positive effect can be given by the introduction of carbon fertilizers - charcoal. If you grind this coal into dust and sprinkle it on the plant, it will be able to absorb excess moisture stopping mold growth.

To combat yellow mold in flower pots, use Activated carbon. To do this, even in the process of planting the plant, pieces of sphagnum moss and several tablets of grated activated or charcoal are added to the ground. They can also be added to the ground, with which you will replace the top layer. When, along with the appearance of mold on the ground, indoor flowers begin to fade, Fundazol should be used.

How to remove mold in a flower pot or garden so that it no longer appears on seedlings? The emerging fungus must be treated with special chemicals directed antiseptic and antibacterial action.

It is possible to effectively get rid of a fungal infection with the help of such drugs: "HOM", "Oxyhom", "Fitosporin-M", "Fundazol". These products are dissolved in water, adhering to the dosage indicated by the manufacturer. The solution is shed beds in which mold development is observed. After watering medical preparations the soil must be loosened, allowing it to dry faster.

When preparing seedlings in greenhouses, care must be taken to ensure that good, clean soil is taken for cultivation. The room should be periodically ventilated. It is desirable to provide solar lighting seedlings, as this measure prevents the formation of colonies of any kind of fungus. So that the earth in the flower does not become moldy, it is recommended to use a solution for irrigation every two weeks instead of plain water. lemon juice or acids. In a glass of water, dilute either a pinch of citric acid or a teaspoon of juice.

If mold appeared in the garden on the bark of trees or shrubs, then you can cover it with a solution of limestone. Not only the focus of the spread of the fungus is covered, but also the adjacent area so that it does not become diseased after treatment.

Video "How to fight"

From the video you will learn how to deal with such an unpleasant phenomenon as mold.

A grayish or off-white coating on the surface of the soil in a flowerpot is mold. Novice flower growers often do not know why the quality of the soil is deteriorating. There are many reasons, but in most cases, getting rid of mold in a flower pot is quite simple.

Experts offer several proven methods for removing unaesthetic plaque on the ground. The sooner an amateur florist will hold necessary measures, the easier it will be for a pet to recover from adverse conditions for growth and development.

Reasons for the appearance

Harmful plaque appears in a flower pot, regardless of the type and age of the plant. Spores of pathogenic fungi are often in the air or fall into a flowerpot with contaminated soil.

Most often, the appearance of a dangerous fungus on the soil is provoked by flower growers. Wrong care behind the plant, unsuitable temperature conditions, excessive humidity activate the growth of fungal microflora.

Often, lovers of indoor plants believe that moldy soil is observed only where flowers require abundant watering. This opinion is erroneous. Unfortunately, harmful white plaque often affects the soil in flowerpots with cacti, ficuses and violets.

Provoking factors:

waterlogging of the soil with excessive watering;
high air humidity;
poor soil quality;
watering the plant with cold water;
at home it is too cold for a certain type of indoor flower;
sampling low-quality soil from the nearest flower garden, and not buying it in a specialized store;
moisture stagnation due to improper arrangement of the drainage system.

Owners take note! Many flower growers have noted: mold on the soil surface often appears in spring and autumn, when the temperature in the room drops, moisture evaporates more weakly, and conditions are created for waterlogging the soil. During these periods, you need to transfer the plants to the warmest room, add artificial lighting providing additional heating, check if the drainage holes are clogged.

Harm to plants

Mold on the surface and inside the soil not only spoils appearance soil, but also provokes problems with the growth and development of pets. Rotting of the roots adversely affects the condition of the plants.

Inexperienced flower growers think that removing unaesthetic plaque will solve the problem. This is a delusion: only A complex approach to mold removal, elimination of conditions for reappearance the fungus will give a noticeable effect.

What is dangerous white plaque on the ground:

the vital activity of the plant is deteriorating;
a dense layer on the soil passes less oxygen, useful substances to the roots
soil quality is noticeably reduced: soil density increases, acidity and mineral composition are disturbed;
mold fungi provoke various diseases, worsen the condition of the indoor flower, with advanced cases cause plant death.
the stem, leaves, flowers regularly do not receive enough nutrients that the mold retains on the surface of the soil;
roots and stems weaken, often rot due to high humidity;
if the owner does not fight fungi in a flower pot, the plant may rot after a while.

How to get bedbugs out of the apartment yourself with the help of folk remedies? Effective Recipes described page.

mold types

Two types of fungus most often develop on the surface of the soil:

white mold. A flower pot is an ideal environment for the development of a fungus. The mold of this type is easy to grind in the hands;
efflorescence. Crystalline plaque is often white, grayish or greenish in color. Alkaline or salt deposits affect not only the outer part of the soil, but also the inner areas.

Root rot is another type of fungus that settles in a flower pot. This type of pathogenic flora is often referred to as " blackleg». Dangerous fungus works in the thickness of the soil, but Negative influence noticeable on the stems and leaves: they turn black, rot, curl. The earlier it is revealed root rot, the greater the chance of saving the houseplant.

Effective methods of struggle

When identifying a strange plaque in a flower pot, it is important to understand what conditions led to the development of mold fungi. Only after the elimination of provoking factors, the risk of soil mold will be minimal.

ten rules for successful fight with mold in a flowerpot:

check the temperature and humidity in the room. Install a lamp closer to the plants, if it is cold at home, stop over watering with the accumulation of moisture;
remove the top layer of earth 2–3 cm thick: it is impossible to allow the penetration of harmful fungi into the deep layers of the soil;
replace the removed soil with a substrate with bactericidal properties, enriched with nutrients. Suitable peat, charcoal, sphagnum moss, special mixtures from a flower shop. Many flower growers recommend adding a couple of crushed activated charcoal tablets to the soil. The best option for each plant, the sales assistant will tell you;
warn further development fungus. Experienced flower growers recommend a solution of Fundazol (for 1 liter of water - 2 g of the drug). Watering according to the instructions for the antifungal agent;
carry out preventive watering. A solution of the available components will help prevent the appearance of mold on the soil: ½ tsp is enough for 250 ml of water. citric acid. indoor flower irrigate twice a month. A simple operation will slow down the spread of a fungus that lives in the thickness of the soil;
treat the soil with a special antifungal compound, if root rot (“black leg”) has started in the soil. The danger of this type of mold is late detection fungal disease. Flower growers learn about a serious illness of a plant only by rotting leaves and stems. When identifying root rot, you will need chemicals: lemon acid is powerless here. At an early stage, a solution of potassium permanganate helps well, with a severe degree of fungal infection, the affected plant is sprayed with Bordeaux mixture, cuproxate or colloidal sulfur;
loosen the soil. This operation prevents moisture stagnation, improves oxygen access to the roots, and normalizes gas exchange between the soil and roots. Dense, “heavy” soil is the fastest way to salinization, the development of pathogenic microorganisms;
transplant the plant. With a large accumulation of mold on the surface and in the ground, severe infection of the flower, transplant into a new flowerpot, complete replacement earth is the only way to save a pet. Carefully remove lumps of soil, rinse the roots with a fungicide solution. In a new pot, equip the correct drainage system (cover the holes at the bottom with pebbles right size), pour high quality soil, plant a plant, sprinkle with peat or charcoal on top;
disinfect the soil. If for some reason it is impossible to purchase new soil, soil disinfection can be carried out. The method is simple but effective. Carefully collect the earth from the roots, remove it from the flowerpot, put it in a wide container, pour over with boiling water. The next step is to fry the soil in the oven. The pot is also poured with boiling water or placed in the oven for disinfection (if the material allows). Before re-planting the plant, the roots must be thoroughly washed from the remnants of the earth, rinsed with a solution of Fundazol;
Take good care of your houseplant. bad care, rare loosening, stagnation of moisture with excessive watering often provoke the appearance of mold. Flower shops offer useful books dedicated to the care of indoor flowers. A lot of current interesting information for beginners and experienced flower growers easy to find on the internet.

Review and rules for the use of shampoos for lice and nits for children, see the page.

Go to the address and read about where fleas come from in the apartment and how to get rid of them.

Prevention of the appearance of the fungus

It is not difficult to prevent the appearance of all types of mold in a flower pot. Regular care behind a flower, compliance with temperature indicators and irrigation norms will bear fruit.

Six simple rules reduce the risk of mold development:

moderate watering with lukewarm water;
arrangement of drainage at the bottom of the flowerpot;
indoor temperature, optimal for plant development;
mixing soil in a pot with pieces of charcoal. A good option- crushed activated carbon for soil disinfection;
watering to prevent rot with a solution of citric acid;
regular loosening of the soil.

Simple preventive measures will not leave a chance for the development of mold fungi in a flower pot. attention to houseplant, compliance temperature regime, optimal humidity, the enrichment of the earth with oxygen will save high quality soil. At careful care It is easy to deal with mold at an early stage.

What to do if there is mold in pots with houseplants? How to deal with colonies of fungal formations? Helpful Tips flower growers in the following video:

Attention! Only today!

Categories

Popular