mosquito net do-it-yourself can be made for windows and doors of any size, taking into account the peculiarities of their configuration.

Standard element A plastic window has a lot of advantages, which is why people use and install outwardly quite modern, home-made mesh on magnets in a wooden window.

The mosquito net has a certain service life, upon completion of which, its design gradually begins to become unusable.

As a result, you have to repair it, order a new one or save money - try to make it yourself.

The article tells how to make a mosquito net.

Manufacturing options, simple and complex

In order to protect against annoying insects, it can be used for both wooden and plastic windows.

You will need the following materials:

• nylon material with small cells (1.2 mm);
• Velcro tape (one side is pile, the other is hooks);
• building glue (for fixing the mosaic).

Before installing the mosquito net, degrease the surface around the perimeter inside the window opening. This is the mount that the adhesive tape will stick to.

Be sure to make sure that the future installation does not become a hindrance when the plastic window closes.

Then do the following:

• Divide the sticky tape into two parts. On the part with hooks, on the reverse side, apply glue and glue it around the perimeter to the window opening. Let dry and fix more firmly;
• Fit the nylon material, under the window opening, with an allowance equal to the width of the tape;
• Bend the allowance, stitch the ribbon with the pile out to it;
• Attach the finished mosquito net, trimmed with fleecy tape along the edges, to the tape with hooks glued to the window opening.

It's so simple, for a minimum amount of time, a mosquito net is made on a wooden or plastic window. To do this procedure, you do not need a full repair.

The second option is more complex, it provides for attaching the mosquito to the frame.

You can make a mosquito net from the following materials:

• metal corners 4 pcs (width 1 cm);
• plastic cable channel (box, size 15x10 mm);
• building glue, blind rivets (16 pcs);
• thin nylon mesh of the right size.

Let's start building the structure:

• We shoot from outer side window opening measurements, based on the available data, we make a frame. To do this, mark the length and width on the plastic box future design. We cut off, with a knife, the desired length of the vertical and horizontal parts of the frame, with a saw cut of 45 °. We grind the cut point with a whetstone;
• We compare vertical and horizontal parts in the desired position. We fix in the corners with a connecting metal corner using rivets (can be replaced with nuts and screws);
• We put a mosquito net on the finished frame, with an allowance of 2-3 cm protruding beyond its perimeter;
• From above we clamp the mesh with a cover of a plastic cable channel. During snapping, alternate the long and short sides. To prevent the cover from opening, apply glue under it in some places. Trim any excess fabric that sticks out.

The mosquito net is ready, it remains to install it in the window opening using Z - shaped brackets.

Features of the construction of the design of the mosquito door

A do-it-yourself mosquito net can also be made on magnets, on a balcony or front door.

Additional plastic structures with a thin mosquito net are more suitable for a balcony.

While Entrance door will require more durable material – metal profile or wooden bars. Plastic options will not work here.

Step-by-step instructions for making a mosquito net on the door:

• We take accurate measurements of the opening, determine the size of the door leaf;
• We prepare horizontal strips, make them 6 mm smaller (this is necessary so that the door opens easily and does not rub against the opening);
• We prepare vertical strips, remove 3 mm from each side. They must be docked with horizontal bars;
• Assemble with self-tapping screws wooden frame. During the assembly process, we control the correctness of the angles with a square, they must correspond to 90 °;
• So that the mosquito net does not sag, we measure out two transverse rails and mount them in the door in parallel in the same plane with the same pitch inside the structure;
• We install the finished door frame in the doorway, provide its temporary fastening with chips, while observing the uniformity of the existing gaps. To exclude unscheduled repairs, we fix the joints of the bars, for reliability, with corners;
• After making sure that the mosquito door fits under the doorway, we mark the location of the hinges on it, after which you can remove the structure and mount the hinges along the marked lines;
• At the final stage, we stretch the mosquito net onto the frame, with an allowance of 3 cm outside, fix it on the frame with a stapler. We cut off the excess nylon with scissors;
• We mount the finished door in the opening.

In the same way, you can make a mosquito net on magnets for a balcony door.

Features of the restoration of mosquito nets

Repair of a mosquito structure for a window involves several stages of action:

• Removing the structure from the brackets, cleaning from dust and dirt;
• Removal of damaged nylon from the frame;
• Installing a new mosquito net in the frame.

Before the repair is carried out and the damaged structural element is replaced with a new one, it is worth paying attention to how the material to be removed is fixed on the frame.

Along the perimeter of the profile, grooves are made into which the edges of the mosquito fabric are laid. Parallel to each other on both sides of the structure are handles.

All this is fixed around the perimeter with a sealing cord. After the seal has been carefully removed, the holders and mesh can be easily removed.

Repairs should be carried out carefully and remember that you have to work with a fragile structure. Special attention you need to pay attention to the handles so as not to damage them.

The replacement of capron is carried out by taking measurements from the old grid, after which the necessary segment of the material is cut off.

A new mosquito net is gently pressed into the groove of the metal-plastic frame, fastened with a silicone or rubber cord. Excess nylon material is cut off.

The repair is completed, the structure can be installed in its original place.

The weak point of the mosquito net for the window is the handles (holders) of the structure, with which the net is installed.

Replacing the handle involves the purchase of accessories and the removal of the sealing cord from the frame.

Step by step instructions on how to repair or replace the handle:

• Pry off the elastic from the corner of the frame, remove it from the groove and lead to the place where the handle is installed (including the installation area);
• We take the pen. In order for the holder to come out of the groove, it must be slightly pulled towards the corner;
• In its place, we install new handles, slightly pressing down from above. The fact that the installation of the handle was successful will be indicated by a characteristic click;
• We place a sealing cord in the groove of the frame. The seal may be dented in the area where the handle is to be replaced. To reduce this, it must be lathered - then it will easily return to the groove.

As you can see, repairing the design of a mosquito for a window or a balcony door is a simple process that can be done in a matter of hours.

To decorate the garden, it is easy to make large, showy flowers from plastic mesh. They look light and weightless.

Yes, and in fact they are - the grid has a small weight. These can become great decoration lawns, lawns. They can also be used in a flower bed or any garden bed. Moreover, in this case, they can become not only an ornament, but also an excellent protection of living plants from the scorching sun. One has only to make the leg of this craft for the garden higher, straighten the large petals, and the sun passing through the mesh will illuminate the plants below with diffused light.

Where to buy plastic mesh?

Enough in construction stores big choice construction grid: there are plenty to choose from. You can buy a colored mesh if you plan to make not only white plastic flowers with your own hands. Very convenient: no need to paint. When purchasing a net, be sure to ask about its characteristics: it is important for you to choose a net that is UV-resistant (and if you plan to leave flowers on the site for the winter, then frost-resistant). By the way, buy plastic mesh such a plan can be bought such a grid not only in building markets, but also in stores for gardeners.

If you decide to save money on purchasing insect repellents or insecticides, then it is worth remembering some very unpleasant moments that may accompany your communication with mosquitoes, mosquitoes and other flying, jumping and crawling brethren. After all, this is not just an amazing discomfort, an unpleasant sensation of touching the wings of an obsessive, ear-cutting sound.

What you need to know about the need for insect protection

With the current ecological situation and the speed of mutations, even familiar, familiar mosquitoes and midges can acquire the most incredible properties and qualities. At the same time, it is worth remembering that for thousands of years insects have been carriers and initiators of the most various diseases- malaria, fevers and other epidemics. Huge continents experienced waves of gigantic pandemics that practically wiped out more than half of the population, devastating cities and entire states. It seemed that such tiny creatures could do? But they are the carriers of swamp fever and other no less dangerous tropical ailments, which affect not only the local population, but people of the European race. Numerous historically famous travelers and discoverers and lesser-known "tourists" of the past and present, those who managed to survive after traveling to the tropical and subtropical regions of Africa, America and the mysterious Indo-China, accurately describe all the horrors of those diseases that all kinds of flies and mosquitoes awarded them. If you have an opinion that it is anywhere but not here, then you are completely wrong.

Today, huge masses of the population migrate to those areas where such infections are widespread and there is a high probability that after a holiday in Malaysia or Singapore, part of the tourists will become passive carriers of a wide variety of pathogens. And this is not all that you need to be afraid of. It is equally interesting that you should also think about your own safety in relation to your body's allergies. After all, the bite of such a nondescript insect can easily cause not only unpleasant sensations, but represents a real danger to life - allergic reactions are very different and very dangerous.

However, all this can be avoided not only by applying medications, insect repellents and other chemicals. There is the most reliable and time-tested method in those countries where insects are common - mosquito nets on window openings and doors. Today it is made of modern materials and has an excellent design and elasticity. It not only perfectly protects against midges and mosquitoes, annoying fluff, which is so annoying when poplars bloom.

Reasons for installing a mosquito net

Nowadays, without exception, all models of plastic windows are offered by manufacturers complete with mosquito nets. So that she does not spoil your mood and does not interfere good review, you need to consult with experts and choose the right everything that will allow the grid to be perfect - the color of the canvases and the size of the cells. Then it is practically invisible and does not present any obstacle to sun rays and air currents. This is very important in the construction of a modern window, where you can open it slightly or fully open while maintaining the tension of the mesh web from insects. This function very beneficial for owners of housing and offices on the first floors of buildings in big cities and on downtown streets.

It is this simple device that has an excellent protective function against dust, fluff, small insects and even minor street debris. And on high floors, it can save the lives of your favorite pets - from a hamster, a parrot to a cat that loves to relax on the windowsills, watching what is happening below. Equally interesting is that the mosquito net is easy to install, which makes it very convenient to place on the door as well. Due to the fact that it can be of various sizes and configurations, it is installed on windows and doorways any scale. Then you will have a calm and peaceful sleep, abundance fresh air in the bedroom, a cheerful mood in the morning and a boost of energy for the whole future day.

In most cases, installing a net from mosquitoes and other insects does not cause difficulties and does not require special skills.

Design features of the mosquito net

Nothing new has been invented for hundreds of thousands of years. Mesh material is easy to perform, and modern innovative technologies allow you to create a lightweight structural model of a fixed type, which represents a simple frame with a canvas stretched over it. This is the simplest thing you could do with your own hands to protect against all sorts of unpleasant sensations and the consequences of mosquito bites. Do-it-yourself mosquito net on the window is very simple, you just need to study the technology and our manual well, choose the right materials.

The technology of this simple device is simple:

• first you need to resolve the issue with the choice of canvas. The best option would be a fiberglass product coated with a rubber compound, which is made on the basis chemical composition PVC;
• making a frame that matches the geometry and dimensions of the window or doorway where it will be located. They consist of a special aluminum profile for mosquito nets connected at the corners with plastic parts;
• overlaying the mesh and fixing it with structural rings or clamps to fix the mesh fiber.

If you have chosen just such a structure and fiber grade for the mesh, it will have the following qualities - resistance to atmospheric influences, excellent fire safety, not brittle in bends, and what is important for the external effect - does not discolor at all over time.

Types of grids and ease of use

Modern structural solutions for doors and windows are simply amazing, and the possibilities of their planar polyvariant opening make mosquito nets just as diverse. Today there are the following types:

• framework. Acceptable for any windows and doors, convenient and practical. Most suitable for those who like to make home improvements with my own hands, easy to clean and well processed, brackets and fasteners allow you to remove it for the winter months;
• door. The same as the previous version, but according to the size of the door, fastened with special hinges, easy to install and dismantle;
• roller shutter. It is convenient because the design allows you to hide them by folding them into a special aluminum case at the top of the opening;
• sliding. Used on terraces and balconies, it has an aluminum frame that moves along the lower and upper rails on rollers. Easy to remove and washes great.

And at the end of our story about the benefits of mosquito nets, I would like to hope that you make a choice between duct tape, poison sprayers, fly swatters and mosquito repellents for the skin, and the possibility of simply making a mosquito net. If you wish, you can purchase it, but one way or another, after installing it, you will no longer meet insects, poplar fluff, plant seeds and banal street garbage in your apartment. Moreover, the prices are very democratic, and the product itself is worth buying or making urgently.

In contact with

Do-it-yourself mosquito net on magnets.

On sale there are curtains that trap insects on the street, the halves of which snap into place independently with magnets of reverse polarity. The products of the Chinese manufacturer require refinement, an analogue of these designs is easy to make at home.

The price of a meter of magnetic tape with an adhesive layer on the reverse side ranges from 50 to 30 rubles per linear meter. For window structures, one side of this tape is applied along the perimeter of the opening. In door and window openings, it processes three sides. Then the contour of the canvas is sheathed with fabric, into which the opposite side of the magnetic tape is passed.

The convenience of the design lies in the self-fixation of the valves, mobility, quick installation at the new place of operation. With self-manufacturing, the design is three times cheaper, the user uses the actual dimensions of the openings, guaranteeing complete blocking of access to insects. The only difficulty lies in correct location poles when passing through a fabric cover. It is impossible to mix up the polarity of the opposite side when gluing on the sides of the opening.

You can choose the density of the mesh yourself, additionally process it with sprays. In addition to insects in the premises, the amount of fluff, third-party debris that accidentally enters a room with a draft is significantly reduced. The design, unlike all previous modifications, is difficult to damage, which increases its resource.

MOSQUITO NETS OWN HANDS: MATERIALS, MANUFACTURING.

Not all window blocks are equipped with factory mosquitoes, some users are not satisfied with the large sizes of these products during off-season storage. Therefore, do-it-yourself mosquito nets are often created from improvised materials. There are several options without a rigid frame, homemade designs from the factory impost, suitable cable channels for electrical wiring.

Detachable options without frame

Do-it-yourself mosquito nets can be hung during operation on clothes, shoes, construction Velcro. The construction budget does not exceed 150 rubles, for which the canvas, fastener is purchased.

It is necessary to choose Velcro modifications, the reverse side of which has an adhesive layer. One part (with hooks) is glued along the perimeter of the window block near the sealing rubber band. This distance is different for the PVC profile of individual manufacturers, therefore, you should measure its value before visiting the store.

The counterpart (fluffy) is attached along the perimeter of the canvas, the excess is cut off with a knife. Instead of a standard mesh, fiberglass can be used, optimal color is black. Through the white cells, the contrast of the street space is reduced, therefore, this color is not recommended.

Removable mosquito net has another installation option. The budget will not increase, instead of a fastener you need to buy a cord (sold in sports, tourist, hardware stores). The diameter must correspond to 4 mm (it is checked by the label, not by measuring manually), the larger one will not fit in the factory groove, the thin one will fly out of it.

Do-it-yourself mosquito nets of this type are cut to the size of the opening with a perimeter allowance of 3 - 2 cm. Installation is carried out in stages:

• the mesh is laid on a groove in PVC profile
• the cord is pressed through it into this groove, starting from the corner
• for convenience, a wallpaper narrow roller can be used
• stretching is carried out alternately: top, side, bottom, second vertical

The advantage of this method is the easy adjustment of the tension, the cord can be removed to smooth out wrinkles. There are no problems with storing the canvas after removing it in the fall. The seals removed for the summer are lubricated, their resource increases (there is no solar ultraviolet, weathering).

Mosquito net from factory impost

If there are stores in the city that sell components, accessories for PVC windows, it is easier to make mosquito nets with your own hands from these elements. The budget in this case will turn out to be maximum, however, the products will still cost less. For homemade mosquitoes you will need a kit:

• frame profile (impost)

• connecting corners

• canvas
• cord of the correct diameter
• pens
• fasteners (Z-brackets)

The dimensions of the structure are taken taking into account the size of the opening - it corresponds to inner dimensions grids. Manufacturing technology looks like:

• impost cut - two vertical, two horizontal blanks, for greater rigidity, an average jumper from the same material can be used
• assembly - the frame is assembled using corners, extensions
• close-fitting - the mesh is superimposed on the frame, pinched inside the groove with a cord on one short side, then the rubber seal is tucked around the entire perimeter, the edge of the cord, the canvas is cut off
• installation - the structure slides into the brackets fixed on the outer frame

The advantage of the method is the factory quality of the elements, the presence original pens, corners, connectors. The impost is cut with a hacksaw, thanks to special elements, the cut is straight everywhere. The mosquito net does not differ in design, quality, resource from factory modifications.

Mosquito net from the cable channel

In small settlements, there may be no accessories for sale from window sides, manufactured in the factory or home master the addresses of these stores are unknown. In this case, do-it-yourself mosquito nets can be made from cable channels that are guaranteed to be present on the construction markets.

The budget for crafts is 300 - 400 rubles, all operations initially take 2 hours, subsequent mosquitoes are created twice as fast.

Manufacturing technology is as follows:

• cut - unlike the previous case, the edge is cut in the miter box at 45 degrees
• assembly - the greatest strength is provided by the connection with metal corners on rivets

• fixing the web - the mesh is snapped into place by the retaining plates of the cable channels around the perimeter, starting from the short side

Field installation is similar to the previous case. If necessary, brackets can be made independently from improvised materials:

• aluminum strip
• piece of pvc profile

• two corners connected by the reverse sides

So that the plastic of the cable channel does not burst at the moment of tension, the riveter is located on the side of the plastic, the crumpled part of the fastener is on the side of the metal plate. The diameter of the drill when making a hole is indicated on the package of rivets or is selected according to the table.

By making mosquito nets with your own hands, the user ensures maximum integration of the design into the size of the existing opening. The comfort of operation increases, there are no cracks through which penetration of insects is possible.

An effective means of protection against mosquitoes and other small insects is a mosquito net. You can buy a ready-made design, or you can make it yourself. Application modern materials allows you to make mosquito protection for a window of mesh material that will fit snugly against window frame and have a neat appearance.

Types of protective mesh

Before starting production, you need to decide what type of mesh you need. They differ in various ways:

• by type of fastening - on hooks, on Velcro, on pins, on Z-shaped brackets;
• by type of opening: stationary, removable, sliding, roll;
• by the presence of a frame: on a frame (frame), frameless;
• at the place of attachment: internal or external.

Below it will be described how to make frameless - stationary and removable, as well as a mosquito protection option - a mesh on a cable channel frame.

How to make a budget version of a frameless mesh?

The simplest version of a do-it-yourself frameless mesh is stationary. The canvas is simply glued to the window frame. But since the canvas itself does not hold well, a strip of material with good adhesion must first be sewn along its perimeter. It can be any fabric tape. If you are installing on a wooden window, the canvas can be additionally fixed with buttons. The advantage of this method is maximum simplicity, the disadvantage is that the mesh cannot be opened or removed to be cleaned of contaminants. That is, after a while it will have to be dismantled and the whole procedure to be performed again.

The second option is Velcro mesh. In order to make it yourself, you will need the following materials:

• anti-mosquito cloth;
• Velcro tape (velcro, "burdock");
• construction adhesive.

Part of the tape is attached with construction adhesive to the inner quarter. That is, to that part of the frame to which the window sash adjoins when closing. The second part is sewn along the perimeter of the mosquito net. Before applying the adhesive, the section of the frame on which the adhesive will be applied must be degreased and cleaned of dust. The advantages of this type of frameless mesh are “reusability”, if necessary, it can be slightly opened or completely removed. In terms of cost, it also refers to the budget option.

To attach the Velcro to the frame, it is better to choose a transparent rubber adhesive, such as Tytan, which is then easily removed without residue. This is especially important if the window is plastic - overwriting and repainting like a wooden one will not work here.

Do-it-yourself frame-type construction

To make a frame with your own hands, you will need the following elements.

• Rectangular cable channel (15×10 mm). The length is determined based on the outer perimeter of the frame, where the frame will be attached.
• Metal corners (10 mm) - 4 pcs.
• Blind rivets - 16 pcs.

Of the tools you will need a saw for metal and a drill. First of all, the dimensions are taken - height and width. From the cable channel we cut 4 pieces at an angle of 45 degrees and fold in the form of a rectangle. Having put the corners on top, you need to drill holes in the profile so that they exactly match the holes in the corners. Then, with the help of rivets, the structure is connected - and the frame is ready. Please note that when riveting, the riveter must be located outside the cable channel.

After the frame is ready, you need to fix the canvas in it. It is superimposed over the frame and snaps into place with the cover of the cable channel. To fix it evenly, without sagging, you need to start fastening along one of long sides. At the same time, you need to make sure that there is no distortion. Then the canvas is fixed on one of the following sides of the frame.

It is better to fix the opposite sides with an assistant, as here you will need to provide a slight tension. At the same time, stretching the canvas, making sure that there is no skew and snapping the bar is inconvenient, so an extra pair of hands will come in handy here. The frame type mosquito net can be attached to the window in different ways. The most common is plunger, using Z-brackets.

To avoid snapping the bar, it is better to additionally fix it with glue. To do this, when the design is completely ready, a small amount of glue must be applied to the gap between the cable channel and its cover (bar).

How to choose a canvas?

The main element in any such design is the canvas. It is sold in rolls and by the meter. There are about 30 meters per roll. If you need to make 1-2 designs with your own hands, then it is better to buy by the footage. When comparing prices, please note: they can be indicated both per square meter and per linear meter. In terms of quality, the canvas differs in the following parameters:

• cell size;
• web thickness;
• material;
• strength.

The last indicator is important for the anti-cat grid. She withstands the "attack" of a pet, she is not afraid of cat's claws and teeth. The most successful material for the manufacture of anti-cat mosquito nets is polyester with special impregnation.

If there is a cat in the house, then only a frame mosquito net can be installed. When installing, you need to take care of additional fasteners - the canvas to the frame and the frame to the window frame. This is necessary so that the animal does not fly out with the net.

The size of the cell is selected depending on the size of the insects in a particular area and what protection is needed from. Most small cells have a cross section of 0.25x1 mm. They protect not only from mosquitoes, but also from small particles sand and dust. A canvas with cells of this size will also become an obstacle to poplar fluff. To protect against raindrops, the cross section should not be larger than 1x1 mm.

The material from which the canvas is made is of great importance. It is he who is responsible for color stability and service life. The most reliable option is a fiberglass canvas with a polymer coating.

Having picked up a high-quality canvas, you can make a good mosquito net of a frame or frameless type with your own hands. It will have an aesthetic appearance, as well as meet all functional tasks. With it, you can ventilate the rooms without fear that uninvited visitors will fly into them: it will protect the house from mosquitoes, midges, and annoying flies.

With the advent of the first sunny days the issue of protecting your home from flies, mosquitoes, midges and other flying insects becomes relevant. Owners of wooden windows traditionally fasten gauze or mesh to the frame with buttons. And in other cases, the assembled mosquito net on plastic windows with your own hands can become a salvation. Frame or roll mosquito netting is easy to install and remove, does not require special care and strict operating rules.

Types of mosquito net

You can independently make a design of two types:

1. Velcro;
2. frame mosquito net.

The first option is simpler and more budgetary. Any woman can make and install such a grid, even without special tools. Frame grids are more practical, they will last for several years, do not deform and retain their basic properties.

To make a mesh with Velcro, you will need: a canvas with a mesh size of 1x1 mm; Velcro tape, on one side of which there is a pile, and on the other, small flexible hooks-grabs; glue for cork tree or mosaic tiles. A strip of tape with hooks is attached with glue around the perimeter of the window frame. After that, the required mesh segment is measured and cut out. The remaining strip of tape with a fluffy pile is attached along the edge. It is recommended to attach it to the frame 24 hours after the glue has completely dried.

Making a frame grid with your own hands

The frame structure consists of the following elements:

1. net;
2. painted aluminum profile;
3. fasteners for the frame;
4. crossbar;
5. fasteners for the crossbar;
6. plastic fasteners for corners;
7. rubber cord seal;
8. handles-holders for installing the frame in the window opening.

At the very beginning, we will tell you how to measure a mosquito net on a plastic window. . Measurements must be taken with the window sash open. Height and width must match the light opening. 4.5 cm of the window frame at the top and 4 cm at the bottom must remain free, they will be equipped with fasteners for the frame. Subsequently, when making a frame, it is important to take into account the width of the aluminum profile. Its standard dimensions are 25 mm.

The assembly begins with the preparation of the aluminum profile. Points corresponding to measurements are applied to it with a pencil, vertical and horizontal planks of the frame are cut out on them. Between themselves, they are connected by plastic corners, forming a frame.

The crossbeam should be 50mm less than the width of the net in order to be easily inserted between the side vertical slats. The main purpose of this element is the tension of the mesh.

In the center of the frame, the mesh can shrink due to tension, and the bar will prevent this.

At first glance, it may seem that a do-it-yourself mosquito net for plastic windows is a complex design and only an experienced craftsman who has special tools in his arsenal can cope with it. In fact, when measuring and assembling, you can use improvised tools: a school ruler, a kitchen or stationery knife, scissors, and a screwdriver and a hammer can be found in every home.

After the frame frame is assembled, you can begin to tension the mesh. To do this, the frame must be turned over. reverse side and lay on a stable horizontal plane. A piece of mesh is laid over the frame so that the protruding parts along the perimeter are equal.

Using a screwdriver or other flat thin object, a cord is tucked into the groove of the profile. It is placed on top of the mesh and holds it firmly inside the aluminum frame. In the process of work, it is important to stretch the canvas and straighten the formed folds.

Approximately in the center of the vertical slats, handles are installed for convenient installation of a mosquito net. They also roll up under the rubber cord. The remaining mesh fabric around the entire perimeter of the frame is cut with a blade or a clerical knife, giving the product a finished, neat and aesthetically beautiful appearance.

Installing the frame grid

Before installation, the profile of the window frame should be prepared. Its surface is cleaned of dust and wiped dry with a soft, lint-free cloth.

For installation, special fasteners are used, which are screwed to the frame with self-tapping screws. Two fasteners are placed on the lower horizontal bar of the window profile, they are slightly smaller in size than top mounts. For more convenient screwing, you can glue them to the frame with double-sided tape. After the screws are screwed in, it is recommended to process all the seams silicone sealant in order to maintain the waterproof and heat conductive properties of the plastic profile.

By the same principle, the upper fasteners are installed. To calculate their location, it is necessary to install the frame with the grid all the way to the bottom brackets, mark the height at the level of the top bar, then add 8 mm to this figure. When installing the mesh in the fasteners, you should hold the frame by the handles. First, the mosquito net is inserted all the way into the top brackets, and the bottom bar should pass freely over the bottom fasteners. The frame is close to window profile, then slowly lowers. If the top fasteners are not stable enough to hold the frame, it is recommended to reinstall them a few millimeters lower.

It is necessary to remove the mosquito net (for example, to clean it from dust and debris) as follows: holding the handles, the frame rises up, is removed from the lower fasteners, then falls down and exits the upper fasteners.

Summer has come. Finally, you can open the windows and ventilate the apartment. But besides fresh and warm air summer can bring unexpected guests to your home, ranging from annoying mosquitoes to flies, bees and other living creatures. To avoid such a neighborhood, you should think about purchasing a mosquito net. But why buy it when you can make it yourself? Moreover, even a person who is not familiar with the basics of construction can make it. So, we need a mosquito net with our own hands. Making such a design will be quite simple.

Doing it better on your own

If you are thinking about getting rid of annoying insects, then most likely you are already interested in purchasing or making a mesh from them. So, how is a do-it-yourself mosquito net for plastic windows made? It is clear that a plastic window is not a wooden one for you. That is, you cannot drive nails into it. Therefore, there will be some nuances in creating a grid.

What do you need?

So we need the following:

The canvas itself, from which then a mosquito net for plastic windows will turn out. Everyone will be able to fix it with their own hands in the right place.

Contact tape (in the common people it is called "burdock" and is sold in any sewing store).

Frost-resistant glue (preferably transparent, but any will do).

That's all the materials that we need. Their total cost is unlikely to exceed the limit of 200-300 rubles. The only thing that can spoil your mood is going shopping in search of necessary goods. After acquiring everything you need, you can proceed directly to the creation of your masterpiece.

Preparation method

Work begins with the fact that the window you have chosen should be carefully prepared - wash the frames from dust and dirt, and then wipe the surface dry. This will ensure a better connection with the structure we are creating. After the surface is ready, a thin bead of glue should be applied to each frame. We will put one side of the Velcro on it (the one with hooks). Do not be afraid to apply glue - the meshes created on the plastic windows will be easily removed. And if you want to remove the glue, you can easily do it with a spatula. Next you need to measure right amount grid and trim it under In order not to make a mistake with the size, you can attach it to the glued Velcro (only after the glue has dried!) And make the necessary marks. The second side of the contact tape (the one that is "fluffy") should be carefully stitched along the perimeter to the edges of the grid. It will be more correct if you sew the fastener along both edges, but one seam in the middle will also work. Now it remains to attach the finished mesh to and then connect our "burdock". Now you can not be afraid that "enemies" will pass through the plastic windows: the mosquito net does an excellent job with all pests and does not let them into the house.

Conclusion

As you can see, there is nothing difficult in the manufacture of this thing. And if you take the initiative and put your hands on it, then soon you will have your own mosquito net for plastic windows. You can do a lot with your own hands, the main thing is desire.

Mosquito (more precisely, anti-mosquito) net on the window in summer time- an absolutely irreplaceable thing. Strong and light, almost imperceptible, such a mesh blocks the path of street dust, insects and poplar fluff, but it perfectly transmits natural light and air. It is not always possible to order it. But you can create this accessory with your own hands at home, and also decently saving. This will only take 2-3 hours (if we are talking about one window), even if you have never had to do anything like this before. You just need to know some nuances, how and from what it is better to make such a grid, which window is suitable for, etc. Let's try to figure it all out.

• swing;
• sliding;
• pleated (gathering "accordion");
• and rolled grids.

Pleated nets and roller blinds are the most compact and do not require removal for the winter.

Any of the above designs in industrial design is quite expensive, besides it is technically complex. Loops are needed, special constipation and mechanisms will be required. You won’t even be able to mount them yourself; this requires skills, experience and a special tool.

It is easier and cheaper to make a mosquito net yourself. But it will be a fixed frame or frameless option, which, of course, will not open / close, but it is guaranteed not to let a single mosquito into the room, delay the penetration of fluff, dust and dirt.

The frame mesh can be external or internal, as well as plug-in. In a frameless version, such a design can only be internal.

What mesh to choose for making your own hands?

When choosing which mosquito net to make for your window, you should focus on the following points:

• the material from which the window itself is made (is it wood or plastic);
• type of wings, if the design is plastic (they are hinged, tilted or combined);
• type of housing (private is a house or apartment in a high-rise building);
• the number of storeys of the building, if we are talking about an apartment;
• window opening mode (frequency);
• the presence of pets.

Based on the given conditions, the following are already selected:

• cloth material;
• mesh design (it will be frame or frameless);
• frame design and material for it (if this option is selected);
• fastening method.

Important: On plastic windows with tilting sashes, only the outer frame mesh can be installed. Unless, of course, for the summer, the sashes from such windows are not removed at all.

cloth

The main thing for a mosquito net own production is to choose the right cloth. Maximum possible size its cells are 3.7 x 3.7 mm. If the cells are larger, insects (in particular, mosquitoes) will easily overcome this barrier. As for minimum dimensions, then they can be limited only by the conditions of air and light permeability for residential premises. On the balcony, for example, subject to the ventilation mode, grids with a mesh of 2 x 2 mm will work perfectly.

Where you have to escape exclusively from mosquitoes (say, in middle lane Russia), a mosquito net with a mesh size of 3 x 3 mm will reliable protection. And in Siberia, where in the cities and villages people are pestered by midges, smaller barriers will be required - mosquitoes 2 x 2 mm and smaller. If we talk about specifically anti-dust "defense" of the home, then only a grid with a cell of 1 x 1 mm can help here.

Note!Some "in the old fashioned way" choose to create a mosquito net on a window with fiberglass (otherwise called fiberglass) with a PVC coating, but this is not the most The best decision because the material, although durable, exhibits very low light and breathability. In addition, its thick threads are destroyed quite quickly under the influence of ultraviolet light, coupled with dust. As a result, the mosquito net turns into a dust collector, which itself “dusts” with the smallest fiberglass needles. In fact, such a grid is subject to seasonal replacement, which is completely unprofitable.

It is better to choose a more modern, reliable and environmentally friendly polyester fiber to create a mosquito with your own hands. It is available with a cell of various shapes and sizes - you can choose the right one for each specific case. So, for example, a material with rectangular cells is durable and cheap, perfectly repels street dust without accumulating it. Air and light, however, such a mesh does not transmit very well, so manufacturers offer a similar material, but with a hexagonal mesh (1.5 mm in diameter), which also resists air and light flows, like a braided fiber with a mesh size of 2.7 x 2.7 mm. That is, with this option in the house there will be much more light and air, with high-quality protection of the premises from dust and insects.

And yet, for self-manufacturing of mosquito nets for windows, consumers most often purchase polyester fiber with rectangular cells, choosing from the following options:

What color to choose for mosquito netting?

This is not only a matter of taste, but also of visual comfort. Diffraction distortions of the light flux should be taken into account. So, if a mosquito net is installed on the window white color, the picture outside the window blurs, loses clarity and contrast. But from the street, through such a grid, everything that happens indoors is perfectly visible.

That is why for the independent manufacture of mosquitoes, experts recommend choosing a cellular fabric dark shades: black, gray, brown. Then the visibility from the inside will improve significantly, and from the outside it will worsen.

Framed or not?

Do-it-yourself frameless anti-mosquito canvases do not hold very well on windows. They are also limited in use due to the impossibility of their frequent removal.

Most a budget option such a mesh (it will cost about 100 rubles) is when a tailored panel is put in place of a regular window seal (which is previously removed), where it is fixed with a regular linen cord. True, in this case, one may encounter a situation of “sticking” over time of the sealant to the grooves in PVC windows. But even if window structures new ones, after a season or two, there is a chance of encountering the problem of non-sealing windows, which means leaks and blowing. And then the repair will cost an amount that is many times more than what was saved on the mosquito net, undertaking to create it with your own frameless hands. That is why it is better to make a frame mosquito for residential premises.

Fastening

It is not enough just to take measurements and cut the mesh, you need to think about its installation and fastening. So, for example, a frame mosquito can be attached to a plastic window in 3 ways:

1. Using plungers - spring-loaded rods with heads. To do this is simple: you must first remove the heads, then position the grid as needed, and then lower the heads. At the same time, the heels of the rods of the mosquito in the openings, as it were, “wedged”.
   On plungers, a mosquito net can be fixed from the inside and outside, but such a mount has a number of disadvantages. It:
   • weakly holds a mosquito (the wind can push it in or take it out);
   • does not hold a natural load (the wind constantly and noticeably shakes the mesh, and because of this, the stock heels in any frame “drill holes”);
   • weakens the frame with holes for the rods;
   • is expensive due to the price of the plungers and the need to use a special tool.
2. Z-profiles. Grids with such fasteners come out compact (and take up minimal space during winter storage). However self-assembly manufactured frame mosquito net on such a profile on the upper floors high-rise buildings extremely dangerous, since a person must lean out of the window almost halfway and at the same time try to install / fix something else. In addition, it will be necessary to drill the frame, which means that there is a high probability of losing the guarantee for a plastic window and making a focus of negative biological activity in a wooden window with your own hands.
3. On brackets. This fastening is similar to the Z-profile, but the thickness of the mesh package on the staples during winter storage is very large. In addition, the nets will have to be shifted with cardboard so that they do not tear each other's panels with staples. But the window frame remains intact. Therefore, a frame mesh on brackets is the best option for making do-it-yourself protection against dust and insects on windows. But only on wooden window structures and if the mesh frame is assembled from improvised materials.

measurements

Independent production of a mosquito begins, of course, with the necessary measurements.

Under Z-profile

If the window is wooden, measure the width and height of the light opening. They do this in several places, and the smallest indicator becomes relevant.

If we are talking about a PVC structure, then for a mosquito net on Z-profiles, the width and height are also measured, but already in the center (and if the opening led more than 2 mm, then in the narrowest part of the light opening) between the inner edges of the seals .

Under staples

To make a mosquito for installation on brackets, you should make almost the same measurements as indicated above. But you will have to adjust the dimensions of the frame, taking into account the width of the brackets used (from 12 mm). Because of this, the light opening will slightly narrow, but for the sake of expanding it, you should not use U-shaped brackets, which allow you to make the frame flush on the inside of the window frame. The latter will be corrupted in this case.

Important: The height of the bracket shelf should be equal to the height of the sill of the window slope with a sealant. And the paws of the upper brackets should be longer than the lower ones.

Homemade frames

To assemble such a mosquito net, you will need the following set of parts:

• 2 drains;
• 2 crossbars;
• impost (additional transverse beam);
• impost connector;
• metal or plastic corners, 4 sets;
• detailed fasteners in the required quantity;
• cord.

Imposts and fasteners for them are ordered optionally - one such element is placed every 60-80 cm of the frame in height.

What matters is the material from which the fasteners and profiles are made. So, for example, steel angles are cheap, but subject to corrosion over time. The PVC coating, which soon wears out, does not save them either. It is better to put plastic - they are good in all respects.

As for the frame profiles, they can be made of PVC or propylene.. The former are cheaper and not as durable, the latter are more expensive, but they serve up to 10 years if the anti-mosquito inserts are changed in a timely manner.

Frames on steel corners are mounted on through bolts, and on plastic ones - on self-tapping screws or standard latches. Additionally, you can fix them with the help of hardware.

Plastic profiles for frames can also be bought in long lengths - 3 or 6 m each. If you need to put frame mosquitoes on several windows at once, this is the best option. A special elastic ribbed cord is also sold by the meter, which allows you to put the mesh panel in the grooves in the most reliable way, with even pressure.

An excellent frame for a mosquito net is obtained from cable plastic channels (boxes) with a width of 10 to 60 mm. The cross section of such boxes for outdoor mosquitoes in Z-profiles should be square, then the frame will turn out to be strong and rigid. If the frame is supposed to be mounted on brackets, channels with an oblong cross section will do. These frames are assembled on steel corners, and fastened to the bolts by removing the covers of the boxes.

The impost, if required, is made from the same cable channel (cut off the required length), clogging its cover with more powerful glue (say, Construction Moment or Titanium), and caulking the ends with corks made of wood. In the frame, such an impost is planted on through wood screws.

Linen laying

The finished frame is placed horizontally, with the open groove upwards. The selected cellular fabric is cut out with an allowance (from 3 cm, but it is better if 10-15 cm). Then the finished panel is placed on top of the frame. It straightens and presses down with weights along the contour.

If the frame is made of a special profile, a cord is placed over the groove along the canvas and rolled with a roller until it is completely pressed into the groove. Excess mesh is cut off, leaving about 1 cm (above the groove).

If the frame was created from cable channels, then the covers of the narrow sides are first placed on the grid spread over the frame. Then they are gently pressed down along the entire length until they snap into place. In the same way, long lids are superimposed and crushed.

Handles and staples

The outdoor mosquito can not be put in place without handles. You can use soft and thin, made of cheap plastic. They are placed on the frame even before the mesh and are pressed into the profile grooves along with the cord. The disadvantage of such handles is that they often tear, besides, the sections of the cord above them are flattened. And you can’t put such handles on a frame made of cable channels - you have to look for something stronger and fix it on self-tapping screws.

Also, for an external home-made mesh, brackets-holders will be required. Plastic ones do not damage the frame, but are fragile and can break at any time. Steel spring clips are more reliable, but, pressing the mesh tightly against the window, they can scratch the frame. The best option is a spring clip with a piece of heat-shrinkable tube stretched over it. You can fix such a tube on the spring by heating it with a hairdryer or over gas burner(very careful).

no frame

There are situations when it is possible to install only a frameless mosquito net of your own manufacture on the window. In place, such grids are attached using:

• "burdock" adhesive tape (velcro);
• or special magnetic strips.

Each of these fastening systems has its own advantages / disadvantages, as well as the scope.

Velcro

Velcro tape holds mosquitoes very well. One half of it (the one with hooks) is attached to wooden frame, and the second (fleshy) is sewn onto the cellular fabric along the entire edge. On a plastic window, such a tape is placed along the contour of the slope (internal, as viewed from the seal). On the winter storage mosquito nets are removed rolled up, and if you sew a hooked half of Velcro to the cloth, in the spring such a roll will not unfold - the hooks will grab tightly together. Therefore, it is necessary to act strictly as recommended.

There are many disadvantages to using adhesive tape. And the most significant of them, no matter how strange it may look, is the reliability of fastening. The hooked part of the tape is glued to the frame with super-strong glue, so it is almost impossible to remove it without damaging the frame. Often, this half of the Velcro tape pulls when removing the second - fleecy, tearing it off the mosquito cloth. That is why Velcro mesh is most often placed on balcony frames, where it safely serves the whole season without removal.

magnets

A homemade frameless mosquito is well placed on magnetic holders:

• single-pole for fastening steel;
• and bipolar for attachment to a non-magnetic base.

Grids on single-pole magnets are installed on car windows. In such cases, the magnetic tape is hidden in a drawstring made of dense thin fabric and sewn along the edge of the cellular anti-mosquito cloth, cut along the right size and form. Finished structures they are simply applied to the windows, where they fit quite tightly along the contour, absolutely without damaging the bases.

Bipolar holders stick together very tightly, so they are great for installing mosquito nets on windows and doors in rooms. Such magnets can be bought in ready-to-install kits, where the polarity of the tapes is pre-marked, and one of them is already on Velcro. It is she who is attached to the fat-free base, and the second is hidden in a fabric sleeve and sewn along the edge of the anti-mosquito fabric.

A bipolar holder can be made independently from a pair of unipolar magnets. In addition, you only need double-sided tape. You will first need to mark the polarity of the tapes so that they do not stick together and do not bounce off each other when installing a frameless mosquito.

A mosquito net on bipolar magnets is the best option for decorating windows and doorways in summer cottages, tourist seasonal boarding houses and holiday houses. Such magnetic holders are also suitable for attaching the bottom and middle of the mosquito to the balcony door in the apartment. Provided that this mesh is fixed to the frame at the top and sides balcony door with the help of "burdock" Velcro.

Making a window mosquito net on a frame with your own hands in 150 minutes and 300 rubles.
I wanted to make a grid with my own hands.
Here's what happened.

Required materials and approximate prices:
in my case, on a grid of 175 * 80 cm. :

Cable channel (15*10mm.) - 4 pcs. length 2 meters, (2m = 15 rubles) total: 60 rubles.
- Metal corner -4 pcs. (I don’t remember the dimensions. It must be included in the cable channel) (1pc = 14r.) total: 56r.
- Exhaust rivet (4.0 * 6) - 16 pcs.
- Glue Super Moment Profi-1pc. (bottle * 5 gr.) total: 80 rubles.
- Mosquito net (1m * 2m) (preferably thin, it is easier to work with.
- Remains sandpaper or whetstone with a large grain.
- Remains plastic corner 3*3cm. -20cm.

Tool:
Screwdriver or drill
Drill
rivet gun
Roulette
Canvas for metal
Pencil
Pliers
miter box

Work order:
We measure the window, saw off the cable channel with a metal cloth at an angle of 45 * in size and grind the place with sandpaper.

1) We measure the window, saw off the cable channel with a metal cloth at an angle of 45 * in size and grind the sawed off place with a sandpaper.
2) We connect the blanks of the frame and insert met in its corners. corners, after which we drill holes for the rivet in the cable channel.

3) Fasten the corners to the cable channel with a rivet. Be careful! the riveter must be on the side of the cable channel or the cable channel will burst when riveted.

You get the following construction:

4) The most crucial and difficult moment comes, we need to stretch the mesh onto the frame.
We impose a mosquito net on the frame so that there is a margin of 2 cm on each side of the frame, and with the help of a second person, we begin to stretch the mesh and snap the mesh (long side-short-long) with the upper part of the cable channel (it is important to choose all the slack, but not drag the grid - this will determine its appearance on the window). After that, we cut off the excess mesh with a blade and “point-wise” glue the mating parts of the cable channel around the entire perimeter of the frame so that the cable channel does not disassemble itself during operation.
(Unfortunately, there were no free hands for the photo of this operation).

The mosquito net is ready, it remains to make a mount and fix it on the window:
Method-1: cut off pieces of 2.5 cm from a plastic corner 3 * 3 cm, and measure the “depth” of the step (cab.-Channel thickness). Cut off the excess with scissors. Then we glue the two corners with the reverse sides to each other (moreover, for the upper fasteners, one side should be twice as long). We fasten the resulting “Z” with a self-tapping screw to the window frame and insert the mesh, first into the upper mounts, then into the lower ones, and lower it.

Method 2: from gesture or sheet metal cut off pieces 1.5 * 3 cm - 2 pcs. and 1.5 * 4cm - 2 pcs. we bend them so that the letter “Z” is obtained, we drill a hole for a self-tapping screw in them from one side, then we fasten them to the window frame as described in method-1.
The simplest and fast way: we drill 4-6 holes in the window frame and our grid and screw in self-tapping screws with a flat head!

Mosquito net for 150 minutes and 300 rubles.

This grid is on the window of the second floor. I take it off in the fall and put it on in the spring. Next season I'm going to wash it, soapy water and a soft clothes brush.
This was the description of the first mosquito net. When making subsequent meshes, I did not make any changes to the process. Much less time is spent on the production of subsequent grids. To date, 12 such grids have been made using this method.