How to install a basket in a closet. Mounting hinges on cabinet. Drawer detailing

The interior of the cabinet is comfortable models similar furniture from uncomfortable, functional from useless. Filling is not limited to a bar with a hanger, there are many more details that are worth talking about in more detail.

Peculiarities

The internal filling of the cabinet is what it is, in fact, purchased for. Proper design of such important aspect allows you to make the closet comfortable and roomy, allowing in the best way place everything there.

Even the most large wardrobes are often undercapacitated due to poorly designed inner space. Equipment should be made "on all fronts", starting with shelves and ending with an area with a hanger for outerwear. Everything must be taken into account: the type of doors and their location, the width and depth of the cabinet itself, the functions that it must perform. Focusing on all these aspects, it will turn out to create a truly useful design.

It doesn't even need to be said that cabinet size plays big role . However, even in a very limited space, you can fit all the necessary compartments, so you do not need to purchase an additional wardrobe. The restriction applies only to wardrobes, since due to the presence of "dead zones" at the joints of the doors, their design is more difficult.

Can be bought already prefabricated structures, and you can make a cabinet to order. Then the question internal filling will be entirely up to you. When designing a large closet, you should not focus only on momentary needs. Often, experienced designers make a model “for growth”, placing additional compartments in it, which the owners do not need yet, but may be needed in a couple of years.

In any case, on all issues of filling the cabinet, you should consult the company that will manufacture this cabinet for you. They will tell you which compartments are best to swap, what can be added, what is better to refuse.

Such consultations are absolutely free provided that you order a model, so you have nothing to lose.

Shelves

Filling the closet rarely remains without such important detail like shelves. They are made from various materials: laminated chipboard, plastic, aluminium. It is worth dwelling on each type in a little more detail.

Standard insert shelves are made of the same material as the cabinet body - laminated chipboard. They are durable and can withstand the weight of fairly bulky items, such as books, unused equipment, and so on. Sometimes the shelves need to be split up to get a completely new compartment - a retractable tie box. Chipboard is perfect for the role of a separator.

Soft plastic shelves used for light items or shoes. They become transparent. Similar models look good in modern wardrobes where the emphasis is on futuristic design. Plastic loses chipboard in many ways, it usually does not last long, and therefore such a choice often disappoints the owners.

Aluminum gratings are mainly used in the lower area of ​​the wardrobe. They are installed under the shoes and are located at a slight angle so that the shoes are better visible. Such shoe racks cannot be fastened close to each other or to the floor, as dirt quickly accumulates under them. It needs to be cleaned out of the closet in time, otherwise it runs the risk of scattering throughout the structure and settling on things.

Thus, depending on the wishes, you can choose any of these materials for the shelves. The best of the listed is chipboard due to its durability and ability to withstand a lot of weight. Moreover, such options will definitely fit the cabinet body. Please note that the distance between the shelves should be 25-40 cm, depending on the planned storage items: for clothes, the distance is greater, for books - less.

Drawers

Suitable for drawers middle zone closet, as this is where it is easiest to open and close them. The upper drawer is usually placed under the lower book shelves, 3-5 drawers are installed vertically. Retractable structures for lower tier become wider and resemble chest of drawers. They are convenient to store linens, blankets and similar bulky items.

In small boxes, they store mainly small things that are usually hidden from prying eyes: socks, handkerchiefs, tights, underwear, and so on.

In some cases, boxes are used to store documents or as home first aid kit. Drawers help protect items from dust.

By retractable design boxes vary greatly. AT last years all models are made so that they do not fall out. The cheapest drawers can only open to the middle, the more expensive models to the very end, but they still hold well in the grooves and do not reach completely. Some drawers are equipped with an automatic closer, which allows them to close completely and silently by themselves.

AT swing cabinets the issue of installing drawers is not as acute as in wardrobes. Here, in some cases, boxes can stand in the "dead zone" and not open at all. To avoid this, experienced designers advise planning the installation at the very edges of the cabinet, so that the drawers can definitely be opened and they do not fall into the joints of the doors.

When choosing boxes, pay attention to fittings. The handles of the structure should be recessed inside the box and practically not protrude beyond its plane. So there is an opportunity to “kill two birds with one stone”: firstly, flat models less prone to breakage, and secondly, the risk that the handles will interfere when opening and closing the cabinet will practically disappear.

Baskets

Plastic baskets are similar to boxes in many ways, with a few differences. Baskets are often made of perforated plastic so that all their contents are well ventilated. It is both an advantage and a disadvantage their transparency: The contents of the basket are visible at a glance.

Roll-out plastic baskets, like drawers, are equipped with a closer for smoother and softer closing. This design is the most traditional, but not the only one.

Recently, metal hanging baskets that are attached to a shelf have become widespread. They have one wall missing by 2/3, through which you can get everything you need so that there is no question of how to pull out the basket itself.

There are also hanging options made of fabric on a wire frame, attached to the bar in deep and large sections with outerwear or hanging clothes. The baskets can be used to store various small items such as socks or children's toys. Fabric baskets are quite durable. They are made of a translucent mesh synthetic fabric, so you need to be careful: clothes in them and next to them are electrified.

Wide drawouts metal baskets can be found quite rarely. They basically act as an alternative to regular clothes racks. They can be placed often, which is why it turns out to save a lot of space in the closet. This solution is ideal for small closets where only clothes are to be stored, as the baskets allow the linen to breathe while keeping things visible.

If you often sin by forgetting about the presence of any clothes in your wardrobe, such a development will solve this problem.

Design Options

Most often, cabinets are divided according to the design of doors into hinged, compartment or combined, which simultaneously have both types of doors. However, this phenomenon is not the only one. There is also a folding door, usually used to decorate curved structures. She, unlike the compartment, is well suited for convex corner cabinets.

According to the number of doors, cabinets are divided into single-door and multi-door. As a rule, the quantity also depends on the historical component, and not only on the size of the wardrobe itself. For example, for a 5-door Italian Renaissance is fundamental, and for a 2-door carved - the Middle Ages. In theory, the number of doors is not limited, but in practice, 3-door coupe or 2-door hinged models are most common.

According to the material of manufacture, the doors are divided into the following.

• Glass;
• Mirror;
• From furniture panels;
• Wooden;
• From chipboard.

As a rule, the choice of this or that material is designed to either emphasize the contents of the cabinet, or completely close it from prying eyes. Some materials do additional function(for example, a mirror), and a number of them carry an additional aesthetic load. For example, very often glass doors are equipped with photo printing, applying a large photographic composition in color to the cabinet.

Chrome-colored aluminum is usually used as a design material, as it looks unobtrusive and stylish. Glossy finish quickly peels off, making the whole look of the cabinet unattractive and not aesthetic. Rods or hooks are made of chrome-plated aluminum, on which you can hang coat hangers, fabric hanging baskets, clothes for special loops.

Finally, cabinets are divided into straight and corner. In the second case, choose decent design turns out to be quite difficult, because corner structures there are hard to reach areas.

It is best to take them under clothes that are rarely worn, such as a dress suit.

How to fix?

Before starting the assembly of furniture, it is necessary to check whether all the fittings are in place. To fix the shelves, the following parts must be available:

• The shelf itself;
• Self-tapping screws or screws;
• Fasteners - 2-4 pieces, depending on the size.

Before deciding how to attach a drawer or basket, you need to understand what these items are held on in the cabinet model you purchased. The holder-guide can be of the following form:

• roller;
• ball;
• Metabox;
• Tandem;
• Tandembox;
• Legrabox.

Each of the listed designs has its own rules on how to install the guide itself and the box.

The basket is fastened inside the cabinet in several ways: either on rails, like a box, or the basket is fixed on a shelf, or it is hung from a hook or rod. The second and third methods are good because it is not necessary to plan for the presence of baskets. In case you urgently need extra space, hanging baskets will instantly come to the rescue.

In general, fastening methods are due general design closet. All details are described in detail in the assembly instructions. There is no way to consider absolutely all the ways in which the filling is fixed in the cabinet, since there are so many models of cabinets, so many ways to mount shelves, drawers, baskets.

More detailed instructions you can see how to replace telescopic rails in the cabinet in the next video.

Dimensions

There are different cabinet sizes. To calculate what you need closet, you need to rely on several features.

The standard depth of the wardrobe is 60 cm, but there are models with a depth of 90 cm suitable for installing rods across the department. It often happens that the width of the section is not enough to install the rod in parallel back wall, then transverse samples come to the rescue.

Maintaining order in the kitchen is not so easy - as a rule, a kitchen set cannot cope with dishes, appliances and other utensils. But we have a solution: with the help of little tricks, you will not only clean up the kitchen, but also save interior space. Read on and get started!

Idea number 1: strictly vertical

Vertical storage system - The best decision for a small kitchen. Compact shelves will not take up much space, but will easily fit all your dishes.

Idea #2: Out of sight

And the pull-out mesh baskets inside the kitchen cabinets make for a great hiding place for cleaning supplies.

Idea number 3: in limbo

In addition, do not forget about hanging mesh baskets, in which it is convenient to store not only cups, but also vegetables and fruits.

Idea number 4: side by side

The functionality of the kitchen can be easily increased with the help of roof rails. Today, many different modules, hooks, special jars for spices are produced for them.

Idea #5: side by side

There are never too many shelves - by purchasing several additional mesh baskets in chrome color, you will solve the problem of storing dishes forever.

Idea #6: In plain sight

It's not easy to put all the pots and pans in one kitchen drawer! It is better to hang them next to the hood or on the wall near the door. A special perforated wall panel will help you with this.

Idea number 7: an original approach

The space in the very corner of the kitchen is quite difficult to use. Special retractable racks and corner boxes of a special design will help to solve this problem.

Idea number 8: cleanliness and order

Use drawer dividers to make them more functional. Now it will be much easier to maintain order!

Idea #9: The Force of Attraction

Attach knives to the wall - and literally. A special magnetic bar will show them who's in charge here!

Idea #10: Spice House

Spice jars can also be stored on magnets. Attach them, for example, to the wall of the refrigerator or the inner door of the cabinet.

Idea number 11: take the height

Use special racks for pans and pots - this way you can use the entire space of the drawer and you do not have to go through them before each cooking.

Idea number 12: successfully hooked

And bulky lids from frying pans and pots are conveniently stored with the help of simple crossbars: attach them to a free surface of the wall in a place convenient for you.

Idea number 13: along the wall

Metal shelves-pockets will help to place covers on the wall kitchen cabinet. If the cabinet is fully occupied, such a shelf can also be placed outside the cabinet.

Idea #14: Everything is in place!

Inside the cabinet it is convenient to store not only dishes, but also narrow boxes with pasta and dough. Just attach a vertical drive to the door - and it will fully justify its new place.

Idea #15: Shabby Chic

And in order not to climb into the far corners of the kitchen for rolls of foil or film, hang them directly on the wall - using an old hanger.

Idea No. 16: in the access zone

Remember how convenient it is to view postcards or small souvenirs on turntables in the store. Add some mobile shelving in one of the cabinets - and all jars and containers with spices will always be at hand.

Idea #17: Under control

Tired of emptying your candy box of crumbs? Solve this problem once and for all by pinching the cookies with a regular clothespin.

Idea #18: Helper Shortcuts

To stop wasting time looking for salt or sugar, sign the lids of the jars in which you store cereals and grains.

Idea number 19: complete order

Organizing recipes will help speed up the cooking process. No more rushing around the kitchen: put all the recipes in one place, or better - in alphabetical order.

Idea #20: A practical example

Too little space in the wall cabinets! Attach hooks to shelves and hang from them coffee cups. And store the glasses under the shelves - upside down.

Idea #21: Line up

Long narrow shelves Easily attaches to the wall and is ideal for storing spices and a variety of oil bottles.

Idea #22: A place in the sun

To the very top kitchen set you need to put something that you rarely use. For example, let it be baskets of alcohol or dishes for preparing festive dishes.

Idea #23: Surprise shelving

And various modules, racks and racks will help to use even the narrowest and most uncomfortable places. For example, sliding kitchen cabinets.

Idea number 24: for the little ones

Numerous spices have the right place in packages from under “Tik-tak”. Just don't forget to sign them!

Idea No. 25: spectacular decor

Dishes can be stored not only in closed cabinets, but also on narrow open shelves. Let your favorite service become original decor cuisine!

Idea No. 26: a basket for boards

A company of cutting boards will no longer fall down the sink when introduced to a compact basket. Choose models from artificial rattan– material resistant to moisture.

Idea #27: Budget idea

Don't throw away cans and rusted rakes, because with proper processing they can be useful for storage kitchen accessories- spoons, forks and spatulas.

Idea #28: Smart Approach

And compact magnetic shelves for small things can be made with your own hands. You will need small baskets from the hardware store, magnets, and superglue.

Idea #29: Go home!

Having bought several plastic containers for sorting food, you will not only free up space in the refrigerator, but also facilitate cleaning in it.

Idea #30: Little Tricks

Do not forget to use the lower parts of the cabinets - it is convenient to store cereals and grains, as well as materials for creativity and needlework, in drawers or baskets right under the headset.

Installation of fasteners on the doors and sides of cabinets - difficult process. From correct installation hinges depends on the balance of the leaves, their trouble-free operation for a long time. How to install hinges on a cabinet with your own hands can be found in this material.

Mounts installed on a large furniture , are semi-mechanical elements , which are responsible for opening the valves. Much depends on the material and thickness of the doors, so what the hinges are made of is also important.

The hinges must withstand standard loads.

For installation most often used overhead devices with four hinges, the so-called frogs. Such mounts convenient for any design involving hinged doors - wardrobe or kitchen cabinet, other types furniture.

Metal parts are made of durable alloys that are resistant to corrosion and mechanical deformation.

Furniture hinges are divided into several types, depending on how they are attached:

• H overlays;
• P half overhead;
• In deposit;
• And inverted;
• Royal;
• Patch;
• Sh tolnye, etc.

Kinds furniture hinges.

for closet often used overhead structures with cup bases, which are connected to the panel using self-tapping screws. Mechanical liners with a "shoulder" are inserted into these bases and fixed on the door and side panel.

Such fasteners are quite reliable and durable, because they have a reinforced connection with the planes.

Depending on the type closet and its dimensions, as well as the material chosen suitable look connecting parts. Some elements used exclusively for classic furniture, where all the details must match the style. For ordinary wardrobes choose standard overhead and semi-overhead mounts.

For installation on sashes, it is necessary to use certified industrial products - this is a guarantee of durability and long service life of furniture and its individual parts.

Preparing for installation

1. Before starting work, it is necessary to prepare a set of tools and materials for furniture . Be sure to have a screwdriver on hand, a drill with the appropriate nozzles, a simple pencil, crayon, ruler or tape measure. You will also need screws of the right size (usually sold with hinges) and self-tapping screws of a certain section.
   

   

   Tools for installing hinges.

2. When installing fasteners, you must consider the material you are dealing with and its structure. For loose or fibrous wood panels apply different types fasteners and methods of fixation. Glass surfaces also require a special approach. Two are mainly used mounts - above and below. If the sash weighs a lot or exceeds a meter in length, then for reinforcement, you can add another part in the center. When exceeding 9 kg, the door is equipped with additional hinges - they are added for every 5 kg of weight. For kitchen cabinets, two hinges are usually used, for large items - from three.
   

   

   The maximum number of fasteners that can be placed on the door with a large length and weight of 20 kg is 5 pieces.

3. From top and bottom internal corners doors must be measured at least 10 cm, otherwise the sash may “loose” over time, and the screws will come out of the grooves.
   

   

   You can not place the hinges at the level of the shelves - the door will not close.

4. Before starting installation fasteners must be marked. This will help connect elements much more accurate.
   

   

   Use a pencil or thin chalk.

5. The average length of the indent from the edge of the sash closet to the center of the loop is 2.2 cm.
   

   

   This distance is for standard mounts.

6. Before installing the hinges on the door closet wipe surfaces. Mark the places of future connections with a sharp nail or awl.
   

   

   Preparing furniture for the installation of fasteners does not tolerate fuss. It depends on it right job doors.

Carefully check all parameters of the sashes closet , shelf arrangement, etc. You can make a preliminary sketch.

Installation of fasteners

cabinet doors pre-try on the sidewalls to make accurate markings. Initial installation stage loops - drilling holes for attaching cups.

Make loops in vertical position doors are not always convenient. This will potentially reduce the accuracy of the connection.

Put the sash on flat surface by fixing it. Drill holes for the cup with a drill and cutter. It is important not to make recesses too large, 1.2 cm is enough. Insert the cups into the holes and screw the screws into the door part of the fixture.

It is necessary that they enter the grooves evenly, without distortion, otherwise the door will not be fixed correctly.

For installation connecting parts, position the drill vertically - any tilt will make the work of poor quality, chips may appear, due to which the mount will not hold securely.The striker on the side of the product can also be installed in the vertical position of the panel, having previously marked the joints.

When drilling, the drill also needs to be kept very level.

If overhead parts are used, then they are made “deaf” so that they do not spread during connection and assembly. Such fasteners should not have gaps and distortions.When connecting the sash and side panel, use the help.

Together, the work process will be more convenient, better and more accurate.

Installing fittings on glass doors requires special care and caution. For such sashes, special fasteners are purchased. On the side of the sidewall you will need holes that are drilled with a drill.

The glass sheet is fixed with clamps.

Alignment and adjustment

Furniture fixtures need adjustment. For this, in the process installations check their fixation in depth and distance. You can do this with the horizontal or vertical position of the parts. closet. After assembling the furniture all preliminary calculations will turn into a result, so it is important to devote more time to the markup and connection parameters in advance.

When choosing, you must first pay attention to the strength of the product, it must serve throughout the entire life of the furniture.

After installing the fasteners on the cabinet doors it is necessary to carefully try on the sashes to the sidewalls so that they match exactly. Mark the joints with a pencil. Fix the door and do fixing work on both sides. It is important that the accuracy of all details closet was one hundred percent. Finish assembly and check the work.

When opening and closing for the first time, the sashes may move somewhat tight if the hinges have not yet been lubricated and developed.

After attaching the hinges to the cabinet finished, it is recommended to drop a little machine oil inside the mechanism. Then wipe the surface with an absorbent cloth.

Check that all elements are working properly.

for closet from chipboard is better take wide loops, as the base material may crumble.

The better all the elements of the assembled furniture, the more reliable their operation will be.

Putting hinges on the door closet , do not forget that after a while the sashes can sag under their own weight, especially if they often remain open. Therefore, it is necessary to periodically strengthen the hinges by tightening the screws. In modern mounts, this is easy to do - there is an additional recess in the oval part.

Try to debug the parts carefully so as not to loosen the grooves.

It is also necessary to lubricate the hinges from time to time. closet so that they do not rust or creak. Adjusting fasteners , it is necessary to fix not only the screws connecting the cup or bar, but also the closer parts. The mechanical part can wear out from operation. Therefore, it is important to have 2-3 spare elements in order to replace a broken part with them. About the "drawdown" says a skew, a loose cover. Work is carried out more often in rooms with uneven floors and high humidity.

If the adjustment does not help, it is worth replacing the old parts with new ones.

When changing fixtures on used furniture, you need to look at how suitable they are for it. It may be necessary, due to the loosening of the grooves, to change the location of the new loops.

After adjustment, check for gaps, tightness of the doors when closing, overall mobility and evenness of the sash along the axis.

When installing several fasteners, it should be calculated so that their location does not fall on the internal elements of the furniture.

VIDEO: How to quickly and easily install furniture hinges.

VIDEO: How to adjust cabinet doors.

Furniture assembly work is considered complete as soon as the hinges on the cabinet door are installed, because the front side is very important. They always pay attention to it when entering the room, so a self-respecting owner will not allow flaws in the installation. A millimeter of inaccuracy in the calculations - and the whole effect of the new furniture down the drain. However insignificant and simple the work may seem, it is an illusion. To do it well, you need to be a master. The aesthetic perception of finished cabinet doors is only 50 percent of success. It is important that they are installed correctly: the period of operation of the cabinet without repair depends on the balance of the doors.

You need to start assembling furniture with a selection of materials and tools that will be needed for work. It is necessary to take into account the structure of materials, because there are different kinds wooden surfaces. They will require different fastening devices and fastening methods. The main methods of fixation are the lower and top position. For massive sashes over a meter long with a heavy weight, add another loop in the middle. For mounting doors over nine kilograms. The maximum number of loops with a product weight of 20 kg will be 5 pieces.

Assembling furniture does not require complex mechanisms. Required set tools consists of simple, familiar things. The following tools are required to mount the door fasteners:

• self-tapping screws (4x16mm);
• roulette;
• a hammer;
• drill;
• screwdriver;
• screwdriver;
• pencil;
• level;
• chalk.

Before installing the hinges, you need to select the material for work. The main material is the fastening device. There are many types of hinges on the hardware market, they may differ:

• construction;
• material;
• design;
• functions;
• style.

They are selected based on the types of material, dimensions, type of furniture. Separate fastening devices are used for furniture that meets certain design styles. For doors of conventional cabinets, standard semi-overlay and overhead fasteners are used.

When choosing fasteners, it is better to give preference to industrial certified products. This will extend the life of the furniture. The selection of loops should be comprehensive, taking into account all the materials necessary for fastening:

• fasteners for large cabinets perform the functions of opening the doors. By technical specifications these are mechanical parts;
• the materials from which the doors are made are of no small importance, one of the significant indicators is their thickness;
• the material of the loops is also taken into account: they are made of alloys that are resistant to deformation and corrosion.

Overhead fasteners with four hinges have one fastening principle:

• the cups lying at the base of the mounting device are connected to the panel;
• the liners are placed in the base, mounted on the side of the body.

Decorative

With closer

Card

Without tie-in

The operating life of these mechanisms exceeds allowable norms thanks to reliable connections. To better understand the process of attaching a hinge to a cabinet, you need to have a good understanding of the types of fasteners. Universal hinges on four hinges have a good margin of safety:

• the interval of their opening angle when mounted on cabinet doors ranges from 90 to 165o;
• they can be adjusted in three different planes;
• the fastening device consists of two elements:
  • planks will be installed side wall furniture;
  • hinges are screwed to the cabinet doors.

Varieties of fastening loops

In the assembly of cabinets, various hinges are used. More often than others, there are fasteners with four hinges. In everyday life they are called frogs. These fasteners fit all cabinets with doors:

• clothes;
• children's;
• kitchen;
• for equipment;
• bookstores.

They are divided into subspecies, depending on how they will be installed. Products have a wide scope, are used for all types of cabinets.

For children

For kitchen

For bookstore

For clothes

Before installing the fastening device, you need to take into account the features of the doors:

• for corner cabinets or pedestals of any configuration, hinges are chosen, which, during installation, will be fixed at an angle of 45o;
• for a cabinet in which the doors are installed on the inner walls of the furniture without closing it, you need to choose an internal hinge;
• for cabinets in which both doors are superimposed on a common side wall, you need to cut in a half-overlay hinge;
• a door designed to close the sidewalls of a niche is fixed with overhead hinges;
• in addition to hinges consisting of 4 hinges, in the practice of assembling furniture, fasteners are used, consisting of 2 parts that connect the axis;
• so that you can open the doors at an angle of 180 °, you need to fix the device with inverse hinges;
• piano loops with simple mechanism used for kitchen cabinets. They consist of steel or brass bands connected by wire. This type of fasteners can only be installed in kitchen cabinets, since for other furniture this mount will be fragile.

When choosing furniture fittings, it is important to remember that when installing hinges with four hinges, they are mounted to the side walls of the cabinet with self-tapping screws, 4x16 mm in size. At the same time, the mount in the cup should have a diameter of 26 mm, the holes will have the same diameter.

How to markup

Before installing furniture hinges, marking is carried out and blanks are made for the subsequent stages of work: drilling and mounting the fastening device. For marking, it is important to know the number of loops per door. The answer to this question follows from the weight and dimensions of the cabinets. To withstand heavy, bulky cabinets, you need 3 or more hinges. Lightweight cabinets can withstand two fasteners. Taking into account the recommendations given in the table will allow you not to worry about the strength of the fasteners.

You need to mark with a level, pencil and tape measure. Compliance with the following order of work will help to make accurate calculations:

• fasteners will be mounted 20-22 mm from the edge;
• the distance of the hinges from the ends of the door should be 70-120 mm;
• if more than two fasteners are to be supplied, first mark the extreme points, then evenly mark the remaining ones.

To make the markup more accurate, special templates are used. When placing several fasteners, make sure that they are not at the level internal elements cabinet (ends, shelves).

Correct markup

After completing the markup, drilling is performed. When assembling furniture with your own hands, rely on the following recommendations:

• holes in the hinge bowl are drilled along the marking lines on the doors;
• the fastening device is placed in a niche, leveled up to 180o;
• carry out the mark of the installation points of the loops;
• drill holes that are needed to attach the mounting device to the door;
• the door is leveled where it will be fixed. Make notes on the closet;
• holes are prepared;
• holes are drilled for the striker plate.

Drill with 35 mm Faustner bit

Start drilling

finished hole

Installation of fastening loops

When installing the mounting device, it is important to know how to properly position it, this determines the life of the cabinet. We advise you to place the fasteners in one line so that the load on the hinges is uniform. In case of non-compliance this requirement loops will not withstand the operational life. All joints marked with an awl or sharp nail must be clearly visible. For these purposes, the working surfaces are wiped. All work must be done in detail: excessive fuss can cause marriage.

Before fastening, a thorough check of all parameters of the location of shelves, cabinet doors is carried out. The ideal option is to draw up a sketch of the installation. If all the elements are ready, you can begin installation:

• sashes need to be tried on to the sides of the cabinet at the marking places;
• secure the door in place. AT drilled holes insert into cups, connect to the door. Errors must not be allowed: all elements must be connected exactly in size so that the door opens effortlessly;
• striker can be connected vertically;
• when using fasteners, it is necessary to mount them “deaf”, they should not have errors. It is better to do the mount with an assistant;
• after installing the hinges on the door, try them on the cabinet. They must match exactly. Dots are marked on both sides. The correctness of the connections will make the operation of the doors hassle-free;
• finish by checking the connections.

There is no need to worry if the doors do not move easily when first opened. The door leaves will develop over time, and after completion of work, the hinges are lubricated with machine oil and wiped with a soft absorbent cloth.

Alignment with a square and designation of the mounting holes of the hinge with a pencil

Inserting a hinge into a hole

Self-tapping screws

Hinges installed on the facade

Types of adjustment of fasteners

What is regulation and why is it needed. This fixes the problem that occurred during the installation of fasteners. Before it is carried out, it is necessary to make a diagnosis in order to detect the problem. Having established the cause, you should slightly loosen the fastener bolt or tighten it more strongly. Adjustment should be made whenever the doors begin to sag. This procedure has three varieties:

• depth adjustment is needed in rooms with uneven floors, it is necessary to loosen the fasteners or tighten the self-tapping screw. For this work, an ordinary screwdriver will do;
• horizontal adjustment is required, especially if the floor is uneven, to eliminate the gap formed between the cabinet and the door;
• vertical adjustment is needed to hang the doors at the right level. The procedure is systematic: you need to adjust the position of the cabinet doors so that they do not sag.

The nuances of mounting on glass sashes

The type of fasteners, specially made for glass leaves, differs from previous devices. On the glass doors you will need to hang special hinges that have great design, adjustment in three different planes. The device includes:

• sealing ring to be screwed to the glass;
• decorative overlay, (it must be screwed to the side walls);
• fastening loop;
• a cap that closes the loop on the front side.

A simple option for glass doors can be hinges, which include 2 parts: plastic seal and a loop. It is attached to the hole under the hinge and on the glass.

Installation on glass doors must be carried out taking into account the characteristics of the material. It differs from other types of fastening, has its own characteristics:

• mark up for installing fasteners;
• drill holes in the cabinet frame with a drill;
• using self-tapping screws, insert a loop into the niche;
• connect fasteners with glass or mirror using clamps;
• to protect the surface from damage, install rubber gaskets between the glass and the mount;
• finally screw the mount.

It is best not to drill into the glass to prevent accidental chipping and damage. This is fraught with the loss of doors.

Installing wide hinges is advisable on the doors of cabinets made of chipboard, since this is a loose material that will begin to crumble over time. To keep the mechanisms in working condition, they need to be lubricated with engine oil from time to time to protect them from dryness and corrosion. In cases of drawdown of doors due to the location of the cabinet in a damp room with uneven floors, it is necessary to adjust the fastening mechanisms.

Mounting the mounting device on the cabinet door is a responsible job, but it is feasible to do it yourself. All of its steps are doable. Particular attention should be paid to the markup, so that the product is pleasing to the eye and serves for a long time without failures and breakdowns.

Furniture hinge for glass

Installation of furniture hinges on glass

If you're going to fit everything you need in your tiny kitchen, you'll need help. Check out our list of the best products to help you make the most of your small kitchen's limited space.

The Magnetic Knife Wall Hanger is a great way to keep your knives close at hand and free up drawer space. Pictured is a Grundtal pendant available from IKEA.

Hanger for kitchen utensils- A great working kitchen tool. Hang one above your worktop and place anything you can hang on a hook on it. Or attach it to the wall to hang pots and pans on it. Now all the utensils that you often use. Will always be at your fingertips, and you. The hanger that you see in the picture can be found in any IKEA store, as well as any related parts (hooks and shelves).

It is possible to save a lot of space in the kitchen by attaching a trash can to inside cabinet doors. In addition, this bucket will not constantly annoy your eyes. The model in the photo is made by Simplehuman.

Not enough space on your worktop? Get cutting board, which can be placed above unused burners. Board pictured courtesy of Local Made.

Remove roll from paper towels from the countertop by hanging it on a special holder in one of the kitchen cabinets. This holder is from Plew Plew.

Magnetic spice containers are indispensable when you need to collect all the kitchen stuff in one place, not just spices (although they are great for this). They can be attached to any metal surface or to the side wall of the refrigerator, as in the case in the picture. Similar containers can be found on Amazon.com.

Removable kitchen cabinet shelf doubles usable space kitchen furniture and deprives you of the need to lift a mountain of heavy dishes to get what you need from the bowels of the cabinet.

Keep everything close at hand with the turntable, perfect for kitchen utensils like spice jars or tea. In the photo - a variant from The Container Store, consisting of two shelves.

Wine glasses are beautiful and it would be nice if they were always easy to get, especially if you have guests. The problem is that they always take up a lot of space in the closet. A wine glass hanger that can be attached to the bottom of your kitchen cabinet will help you save a lot of space. The pendant in the picture is designed for 9 glasses.

Nothing transforms a kitchen quite like a small mobile kitchen table, which we can easily provide you with additional workplace, and . The table in the photo is made by Target, but you can also get a similar version from IKEA Bekvam.

A basket attached to the cabinet door is a great place to store your cleaning products: they are much easier to get and give you extra space.

You probably don't keep a lot of magazines in your kitchen, but plastic tray for magazines and documents attached to inner surface kitchen cabinet is a great place to place narrow and tall boxes (for example, boxes with foil or cling film). Such a tray can be bought at any stationery store and independently adapted for kitchen needs.