Cleaning products for chrome faucets. Effective ways to remove limescale from a faucet. Bronze faucets: how to clean

Tap water with a high content of magnesium and calcium salts (“hard water”) is a fairly common phenomenon. Its unpleasant consequences are the appearance of whitish stains and lime deposits on plumbing, bath or tile.

Old lime scale is difficult to remove with normal cleaning, so you have to use special preparations for cleaning or folk remedies.

What to use for cleaning

In apartments, chrome-plated plumbing is more often used, which requires careful cleaning. Using abrasive cleaners will scratch the shiny surface with its further darkening and even.

To clean the faucet from limescale, do not use preparations with aggressive acids (hydrochloric or phosphoric), or alkalis.

How then to clean the limescale on the tap? On sale there are gentle preparations created specifically for the care of chrome surfaces.

For example, "Top House for of stainless steel"(Germany), "Electrolux stainless steel cleaner spray" (Sweden), "Pufas Glutoclean" (Germany), "Cif" (Hungary), "Sanoks" company Aist Peter, "CILLIT BANG for metal surfaces"(Russia), "Selena Glitter of Steel" (Russia).

The main thing is to carefully follow the instructions and not violate the exposure time. chemical on the surface to be cleaned.

Under no circumstances should plaque be removed. sharp objects or hard metal sponge. The chrome surface will become cloudy, scratched or have dark spots.

home remedies

How to remove limescale from a faucet using improvised means? Baking soda is diluted to a slurry and gently and effortlessly distributed over contaminated areas. After an hour, softened deposits are easily removed., and the remaining whitish stains are wiped with a household sponge.

Weak lime deposits can be removed with soap. Grated laundry soap is mixed with a small amount of water and a teaspoon of soda until a gel-like substance is obtained. The mixture is applied to the tap, and then thoroughly washed off with water.

Cloth or paper towels soaked in warm 9% vinegar are placed on the places of contamination. Softened after a couple of hours lime stone removed with a sponge, and the surface is thoroughly rinsed. To wash more resistant areas, they are re-treated.

Similarly, cleaning is carried out with diluted citric acid (2 teaspoons of powder will be required per glass of water) or lemon juice. The cut lemon slice is dipped in finely ground salt, the contaminated places are gently wiped and after a while washed with water.

The procedures are performed with rubber or latex gloves to avoid damage to skin areas and the occurrence of allergic reactions.

We wash the mixer from lime deposits

The cleaning procedure is the same as for the faucet.. A special problem is, the holes of which "overgrow", and water jets do not pass well through it. The removed strainer or watering can is completely placed in 9% table vinegar for several hours to clean the nozzles.

To speed up the process, the solution can be heated. Then they are washed and with improvised means (a darning needle, a toothpick or an unnecessary toothbrush) they clean the holes. can be replaced with "CilitBang".

Often, an aerator is installed on the mixers, the holes of which are also gradually filled with lime deposits. The aerator is carefully removed, washed running water, and then immersed in a solution of vinegar and water or treated with "Cilit". After cleaning, it is rinsed and installed in place.

If the aerator is plastic or made of extruded aluminum, then when unscrewing it, it may break. In this case, the cleaning solution is poured into a container or plastic bag, the part to be cleaned is immersed in it and left for several hours. Then the holes are cleaned and washed with a strong jet of water.

Cleaning around the faucet

The same means are used, store or "grandmother's". They can be applied with a sponge desired area, you can moisten a rag or paper towels in warm vinegar and apply around the faucet to soften.

Then the plaque is removed, and the washed surface is wiped dry. This cleans the chrome parts and ceramic surfaces. In hard-to-reach places, small-sized brushes (toothbrush or for washing hands), plastic or wooden toothpicks are used.

How to avoid the appearance

Most effective way get rid of them - every time after use, wipe the plumbing dry.

Soap stains, fresh deposits are well cleaned with a microfiber cloth, which is sold in a hardware store. She can also rub chrome parts to a shine.

There are special wax shampoos on sale, which are usually used by motorists. A small amount of shampoo is applied to the sponge, and then everything is processed shiny surfaces and polish them to a shine. Thus, for almost a week, the taps will be clean and shiny.

You can use metal care products. A thin film forms on the surface greasy spots, lime and the appearance of rust. Various metal polishes are available, for example, Domax, Wpro 29 945, HG Steel Polish, Indesit. They are applied to a clean, dry surface, and then rubbed to a shine.

Metal parts can be rubbed with glass cleaner.
Even with “hard” tap water, keeping metal and chrome parts of plumbing fixtures clean and shiny will not be a hassle. The main thing is to remove limescale deposits when they are just beginning to form, and to use cleaning products correctly.

The faucet is exposed daily various loads during its operation and therefore it may fail. Water, in which there is a lot of iron, sand and various small impurities, can clog it and when turned on, the mixer starts to buzz or dig. Therefore, we will tell you how to clean the mixer.

You will need:

Wire;

Boiling water;

adjustable wrench;

Screwdriver;

Shell cleaner;

Sewing needle.

Cleaning process

1. The faucet with valves may wear out the seal. Then it will need to be replaced. But everything ball mixers with a locking mechanism are reliable, as their parts are made of quality material. The failure may be due to the hardness of the water. Close the valve, take the wire, and stick it into the hole. Move the wire from side to side and slowly open the valve. The blockage must break through.

2. Cleaning the mixer with ball valves. Unscrew the screws from the handle with a wrench, loosen the adjusting ring and remove all unscrewed parts: ball, copier and sealing ring. Then in two liters very hot water dilute three tablespoons of 70% vinegar and place all the removed parts there for about forty minutes. Then rinse them under running water and assemble the mixer in reverse order. All foreign particles accumulated in the faucet will be removed, and the flow of water or the hum should stop.

3. Disc crane. Unscrew the index cap with a screwdriver, then unscrew the screw and remove the handle. Next, the cover on the case is removed, the handle and cartridge are unscrewed. Put all parts in water with vinegar and rinse with water after forty minutes. Assemble the mixer in reverse order.

4. Coupling edge n. It is cleaned by the above method, remove all spare parts in advance. Soak them in vinegar too and assemble them in reverse order.

5. Cleaning of spare parts of any faucet. You can quickly clean all parts of the mixer with products that are designed for cleaning cooker, toilet bowls and sinks and are sold with a sprayer. This will be the answer to the question of how to clean the mixer. Spray all disassembled parts with a product, after the time indicated on the package, rinse with water and assemble the tap.

Cleaning the aerator filter on the mixer

1. Unscrew the filter from the faucet spout. Shake out large particles of rust. Particles that are stuck in the grid cell are removed sewing needle. Such cleaning of the mixer requires perseverance and patience.

2. Dip the filter in food vinegar for thirty minutes b. Shake contents periodically. This will clean the filter from limescale and precipitation. Then just put it in place and use it until the next cleaning.

Keeping a bathroom clean is a lot of work, requiring precious time to be spent cleaning and polishing the details. faucet. Under the influence of dirt, dust and soapy water, faucets dim, become covered with stains and various deposits. Cleaning the faucets in the bathroom is quite problematic due to complex shape and features of the coating, so plumbing owners should familiarize themselves with simple and effective ways to care for and clean faucets.

Most importantly, before you start disinfecting and cleaning, you need to determine the type of faucet cover. This is required for right choice means and more delicate cleaning of the surface of the mixer, based on its features:

• during cleaning, do not forget about the aerator of the mixer, since it is there that scale and rust particles settle;
• do not use abrasive products to clean the sanitary ware, because aggressive cleaning can severely damage the surface of the mixer;
• when cleaning the surface with a sponge, you need to wash the faucet with a softer side to avoid scuffs and visible scratches;
• to make taps and bathtubs shine and please with mirror cleanliness, you can try to apply a little delicate glass cleaner to the mixer before the final wipe with a dry cloth.

How to clean a chrome or nickel-plated faucet?

Chrome and nickel-plated mixer surfaces require a special approach to cleaning and disinfection. To wash the mixer, you can use the following products:

Dishwashing liquid

One glass warm water to be mixed with a tablespoon detergent. Next, soak the sponge with the solution and carefully clean the parts of the product. Pay special attention to the base, spout, valves and faucet levers.

Baking soda

How to clean rust from a chrome faucet in the bathroom with ordinary soda? Using a soft damp sponge or cloth baking soda distributed over the contaminated surface and left for half an hour. Then it is washed off with cool water.

white vinegar

6% white vinegar is poured into a spray bottle and spread over the chrome and nickel surfaces of the product, dissolving mineral deposits. Do not touch the vinegar drops for 10 minutes. Wipe the mixer with a dry soft cloth.

Cleaning copper faucet and stainless steel faucet

A copper faucet begins to fade over time and become covered with a greenish-brown coating. The next step is to clean the copper faucet in the bathroom.

Cola or Pepsi

The spray bottle is filled with ordinary Cola or Pepsi. Soda is sprayed onto the mixer and soak for a few minutes. clean water rinse and rub gently wet wipe. Thanks to the acid contained in carbonated drinks, they do an excellent job of cleaning copper parts of the product.

Vinegar and salt solution

To clean the copper product from green plaque, you will need to remove the mixer and boil it in water with the addition of vinegar and salt.

How to Clean a Brass or Bronze Faucet

Knowing how to clean brass taps in the bathroom, you can quickly and easily return the tarnished product original view and a noble matte finish. Most effective recipes brass faucet cleaning are shown below.

A mixture of vinegar, salt and flour

For its preparation, one tablespoon of 6% vinegar, salt and wheat flour. The cleaning mixture is spread over the surface with a damp sponge. Next, the parts of the tap are rinsed with cool water and wiped soft cloth dry.

tomato paste

it effective remedy will help restore the brass faucet shine and cleanliness. The faded areas are covered with tomato paste and aged for about half an hour. Then the cleaned mixer is rinsed and carefully wiped.

Linseed oil

An excellent prevention against dullness and darkening of brass is the periodic application of a thin layer of linseed oil to the water tap.

Lemon juice

By using citric acid and salt, you can restore the brass product to its former radiance. To do this, cut a small lemon in half, sprinkle with finely ground salt and wipe the surface of the sanitary ware with it.

Bronze faucets, just like brass ones, darken very quickly and take on a dull look. If the bronze mixer is too dirty, a specialized paste, such as Trilon-B, will be required to clean it. In other cases, homemade cleansers can be used.

chicory powder

To prepare a cleaning composition, 3 tablespoons of chicory are diluted with warm water to a mushy state. Ready mix spread over the contaminated bronze surface. Washes off after a while.

A mixture of sodium and potassium

With severe pollution, a solution of potassium and caustic sodium helps. The composition is evenly applied and aged for about half an hour. Then it is thoroughly washed and dried.

Important! To avoid damage and scratches when cleaning a brass or bronze faucet, do not use metal brushes and too hard fabrics.

Cleaning hard-to-reach places on complex faucets

Another important problem in the operation of the mixer is the accumulation of dirt between the parts of the product. To clean such hard-to-reach places, a few simple tricks will come in handy:

1. take the old Toothbrush and with its help, baking soda is rubbed into the contaminated slots of the tap (to make it easier to remove the dirt, a drop of water or vinegar is added to the soda);
2. 20-40 cm of dental floss is measured and hard-to-reach places and joints of the water tap are cleaned with it. After that, do not forget to rinse the mixer with cool water and wipe dry.

Timely cleaning of the water tap from various pollution will allow in the future not to waste energy on removing old stains and dissolution mineral deposits. If you regularly follow the above recommendations, in the bathroom you can not only enjoy cleanliness and radiance, but also significantly extend the life of the sanitary ware.

Poor water pressure in the tap brings constant inconvenience to the residents of the apartment. Before the breakdown of the water supply systems of a residential building, people do not really think about how from a jet pure water Absolutely all processes in the kitchen depend on the tap. Delays in the bathroom are undesirable, especially in the morning. How to fix an unpleasant problem and avoid its occurrence in the future?

Global pollution problems cannot be eliminated on their own

Causes of low water pressure

A person strives to equip his own home, making every possible effort to create a special comfort. Regarding the installation of new plumbing, in this way a person takes care of himself and his family. Phenomena over which the owner of the house has no control are the work of centralized systems. These include water supply, electricity or gas supply. It is extremely difficult and quite expensive to prevent problems of this kind, given the cost of calling emergency services. Remains Alternative option- independently understand the reasons for the decrease in water pressure in the tap. To begin with, you should inspect the main taps and identify the root cause of the breakdown. Failures in the operation of systems, akin to a human disease, if the disease is eliminated, the symptoms will pass over time.

Common causes of a sharp decrease in water pressure in a residential building:

• clogged pipes or faucet;
• blockage in the main part of the underwater pipe;
• reduction of the total pressure in the pipeline;
• breakdowns in a separate water supply line, when arranging a home.

Global problems cannot be fixed on their own, but minor problems disappear in a matter of hours. A faucet made of different metal alloys can rust in the inner part in contact with the water jet. This happens when the indicators of the liquid that falls on the table of the residents of the house do not meet accepted standards.

Poor quality material can cause an annoying breakdown. Scale is one of the most common problems leading to a decrease in water pressure.

Faucet Troubleshooting

Before diagnosing a breakdown, you should find out which pipes or taps in the house began to work worse. If the problems affected only one faucet (in the kitchen or in the bathroom), then the probable breakdown overtook minor details inside a simple fixture. Replacing damaged parts will eliminate all pressing problems with water pressure.

How to clean the faucet in the bathroom inside?

If the problem of poor pressure is determined, then you should immediately start troubleshooting. To begin with, you should apply the most gentle methods of cleaning the tap. Special funds to remove contaminants from metal products, apply only subject to certain rules:

1. Use funds general purpose(bleach) is not recommended for such purposes. You can buy special mixtures at any hardware store, and follow the instructions to clean the inside of the faucet. Unsuitable aggressive substances will only aggravate the condition of the pipes.
2. mix two different substances absolutely not recommended. When combined, strong mixtures can release new hazardous compounds.
3. To clean heavy dirt, it is advisable to use means in the form of a liquid or foam.. Powder preparations are unevenly distributed throughout the pipe and their cleaning power is significantly reduced.
4. Before using chemical mixtures, a person must protect his own skin and respiratory tract (from toxic fumes). Simple precautions can help prevent burns and allergic reactions.
5. Simple dirt (scale or rust) requires no more than two cleanings with chemical solutions. Pipes and faucets should be cleaned no more than twice a month, otherwise the integrity of the chrome coatings will be compromised.

Often the question arises, how to clean the mixer

Faucet mixer

Dust or rust does not only affect faucets, often debris and corrosive accumulations clog part of the pipeline. The same fate can befall the mixer mesh or filtration system. Over time, such a problem will lead to a complete disconnection of the house from the water supply system. The danger of such a breakdown lies in the fact that the pressure of water, which is blocked by scale, can find weak spots in the pipe, and then leaks are inevitable. It is not worth dragging out time, if the water pressure has decreased significantly, it is necessary to find the cause of such an unfortunate phenomenon as soon as possible.

The question often arises, how to clean the faucet if the water pressure has dropped significantly? Modern taps made of different alloys - brass, copper or bronze. Depending on the type of mixer, the correct cleaning is performed:

1. Brass when interacting with environment fades, so it is worthwhile to approach the cleaning of such mixers more carefully. Viscose cloths and or soap solutions. Excessive friction will cause unwanted cracks to form. Brass faucets do not tolerate hard brushes and strong chemicals. To remove dirt, tomato paste or a homemade mixture of lemon and salt is useful. It is enough just to apply the mixture on the damaged surface, and then rinse everything with warm water.
2. Copper faucets. For comprehensive cleaning similar detail water supply system in a residential building, it is necessary to disconnect the tap from the pipe. Copper faucets are cleaned with a simple detergent or vinegar solution. In case of severe contamination, parts can be boiled in salt water. Pharmaceutical acid (citric or ammonia) helps to get rid of "colorful" spots on a shiny surface.
3. Expensive taps - bronze, get dirty very quickly. Mixers of this type need special care and attention. Bronze pipes or faucets can be cleaned with concentrated zirconium or sodium powder. It is best to remove contamination on the dismantled part (disconnect from the water supply and disassemble the parts).

The degree of contamination of the product plays a decisive role in how quickly the contamination is removed. It is easiest to remove fresh, non-stagnant stains or stains.

Pressure drop in pipeline

The water pressure is provided by the pressure created inside the pipeline. Problems on pumping station, from which water enters hundreds of houses and apartments, lead to a sharp decrease in pressure in the tap. In such cases, diagnosing pipes will not give any result. Violation of the sealing systems leads to undesirable consequences. Weak pressure in the kitchen or in the bathroom will become a problem for all residents of the house. Failures of stations or underground pipelines will be eliminated by utilities, and from common man little depends.

The restructuring of water supply systems in the process of repairing a house or apartment (replacing pipes and taps) is carried out according to clear instructions, and violation accepted rules leads to malfunction of the pipeline. Water supply to apartments difficult process, therefore, unfortunate breakdowns occur often, the owner of the house has to react to them in time.