Glue for non-woven and vinyl wallpaper is good. What glue is better to glue vinyl wallpaper. The advantages of glue for non-woven wallpaper

It is probably not a secret for anyone that the quality of the work performed on wallpapering depends on the correctly chosen wallpaper glue. In the article, we will understand what determines the choice of glue and get acquainted with some of the main brands of adhesives in the construction market.

Choose glue depending on the type of wallpaper

Manufacturers provide wallpaper adhesive for (non-woven, vinyl, fiberglass, textile, paper, photo wallpaper, etc.), as well as one-stop solution, which is suitable for working with all types. In the latter case, you only need to observe the condition: the heavier the wallpaper, the thicker the glue should be kneaded.

When buying glue, you will be faced with another choice - it is a dry powder mixture, or ready-made, diluted in correct proportions, glue.

And there is also an option when the wallpaper is already saturated with inside canvases with an adhesive composition - self-adhesive wallpaper. It is enough to moisten them with water for a certain time, and then get down to business. In some wallpapers you just need to shoot protective film during gluing. This option attracts by the fact that you do not need to choose glue, calculate its quantity, purchase consumables (roller, brushes) and you can safely ventilate the room immediately after finishing.

But such wallpapers have some drawbacks. They are very thin. If the wall is not enough, then the self-adhesive will not hide the defects and they will be very noticeable. Another disadvantage is their high cost.

Let's go back to the glue that needs to be diluted with water. This is the one that is most in demand. Such glue is diluted in a previously prepared container with water, gradually adding a small portion of the loose mixture. The proportions will be indicated on the packaging by the manufacturer, try to follow all instructions. Calculate in advance the consumption of glue, depending on, while do not forget to round the figure in reserve up.

For beginners, there is a kind of glue with an indicator, thanks to which the glue is colored in color (pink, blue) and you can clearly control the place of its application without missing a centimeter. After drying, it becomes colorless.

Wallpaper glue manufacturers

We will look at the five main manufacturers of wallpaper adhesive, but today there are much more.

Wallpaper glue KLEO

Wallpaper glue Cleo French production. This is the very first and largest brand of Ascott Deco Rus. Includes four directions of wallpaper adhesive: Line Optima, Line Special, Line Professional and Line Natural.

The manufacturer offers solutions for vinyl, paper, photo wallpapers, textile, velor, heavy types of wallpaper, natural (bamboo), as well as KLEO KIDS wallpaper glue, designed to work in. There is an option with an indicator for beginners. There is a universal adhesive.

And also provided ready-made glue KLEO ULTRA, designed for gluing fiberglass, textile and washable wallpaper. Recommended for .

Wallpaper glue Metylan

This is a German Henkel wallpaper paste, first released to the market in Germany in February 1953. It appeared in Russia at the end of 2011. It was the world's first adhesive with a pink beginner indicator.

The company offers its customers glue for non-woven, paper, fiberglass, paintable, textile, velor, duplex, silkscreen, metallized and other exclusive heavy types of wallpaper. Also presented universal option and a solution for wallpaper joints.

This glue has been produced in Germany for a long time, since 1928. To date, there are more than 200 items of products, which include different kinds wallpaper glue.

The manufacturer is open to anyone from anywhere in the world. You can follow the production, visit the exhibition and get comprehensive information on each product.

Glue entered the Russian market in 1992.

The manufacturer offers glue for non-woven, vinyl wallpaper(with and without blue indicator), metallized, embossed, velor, paper, wood fiber for painting, for heavy wall coverings.

It offers solutions for rooms with high moisture resistance, as well as a series of ECOLOG adhesives. In tests carried out by the German Institute for Ecology wallpaper adhesives various manufacturers, Ecolog, representing PUFAS, was awarded the ÖKO TEST GUT sign.

Manufacturer France. Just like its competitors, it provides a choice of glue according to the type of wallpaper: non-woven, vinyl, fiberglass, paintable. Some specimens have environmental, fungicidal and anti-mold properties, indicators to control the spread of glue. A separate agent for gluing joints is offered, ready-mixed adhesive.

The Semin company was founded in France in 1838, and has been on the Russian market since 1996. It has three factories, one of which is located in Russia.

Despite the fact that the range of wallpaper glue is much lower than that of the above manufacturers, the product of this brand has established itself as high quality. In addition, it is not possible to buy it in Moscow at every turn. That is what we choose.

When buying wallpaper glue, pay attention to its composition. If it is based on modified starch, then it will be relevant when gluing light types of wallpaper, and will need constant adjustment (the wallpaper will have to be glued periodically). It has a poor ability to adhere wallpaper to concrete and wood surfaces.

The most tenacious is glue based on carboxymethyl cellulose, however, it should only be applied to / surface, wallpaper will not adhere to painted walls. For painted surfaces, you can use a slightly less tenacious adhesive based on methylcellulose, but with the presence polyvinyl acetate(abbreviated PVA).

If you are going to work with heavy types of wallpaper, such as wallpaper with wood impurities, fabric wallpaper, then when the content of polyvinyl acetate in the adhesive is less than 25%, the wallpaper can simply fall off the wall under its own weight. To avoid this, PVA in wallpaper glue should be at least 50%.

Important is PH value. Glue with a PH level below 7 units will leave stains on light wallpaper yellow color. For light wallpaper it will be safer to buy glue with a PH mark of 10 or higher.

Glue curing time. Good glue hardens in 18-20 seconds.

If you have to do with high humidity, such as bathroom, hallway, kitchen, bathroom - look for glue with bactericidal and fungicidal additives. They will prevent mold and mildew from growing on your walls.

We recommend to our clients buy glue narrowly targeted, depending on the type of wallpaper, giving preference to the manufacturer Quelyd. When working with expensive, elite wallpaper, we recommend using SEM-MURALE glue from the manufacturer SEMIN.

Finally, I would like to remind you that you need to responsibly approach not only the choice of high-quality glue, but also wallpaper. After all, we have already written about this on the pages of our site.

If you have any questions, ask in the comments, call, and also place orders for wallpapering or cosmetic repairs your dwelling. We are in touch with you every day.

Everyone who has taken part in repairs at least once in their life will agree with the words that every little thing here has great value. Especially if you are busy with wallpapering. About how to choose glue for non-woven vinyl wallpaper today in our article.

Indeed, the durability of the coating will depend on its quality and compliance with the preparation technology.

Why is the quality of the adhesive mass important? It depends on it how neatly and tightly the canvases will sit on the wall.

Criterias of choice

1. First of all, choose non-woven wallpaper adhesive according to the type of coatings, their weight and the material from which they are made.
2. It is also important to take into account the structure of the wall, its humidity, surface material and temperature.

Classification

There are only two main varieties wallpaper composition. It can be presented in dry form or in the form of a liquid, which can be immediately applied in practice.

Dry glue for non-woven vinyl wallpaper contains cellulose and various additives.

Note! One of the main rules for preparing mixtures is density. It should depend on the thickness of the material with which you plan to finish the surface of the wall or ceiling. If you purchased ready mix(second type), apply it to the surface immediately.

The mixture is also divided into universal and special.

Rating

• 1 place. The EXCLUSIVE glue has a good sliding ability, but at the same time it seizes quite quickly. After drying it becomes transparent. EXCLUSIVE NON WOVEN ingredients: methylcellulose, modified starch, special additives.
• 2nd place. Methylan Interlining Ultra Premium. In addition to standard methylcellulose, it contains polymer adhesive components that enhance adhesion. Thanks to this, the canvases fit perfectly on lime, concrete surfaces, cork and drywall.
• 3rd place. QUELYD is based on modified starch, antifungal components and bactericidal additives. This composition requires careful preparation surfaces.
• 4th place. The pouffe has a special reinforced composition, therefore it is suitable for fiberglass and interlining. It has good adhesion, does not require complex wall preparation, and is transparent after drying. When gluing, the canvases are perfectly joined due to good sliding, quickly seize and perfectly adhere to the surface.

Composition for paper coatings

If you have purchased paper sheets, choose any universal mixture. This type, regardless of price, is of high quality and reliable.

We apply the composition with a special brush

If your room has high humidity, purchase a mixture containing special means which will be able to prevent the process of the occurrence of the fungus in time. Remember that certain conditions.

Adhesive for non-woven fabrics

If you want to finish the walls of your room with non-woven backing, you need a vinyl mix or CLEO for non-woven fabrics.

For other heavy coatings, you can purchase special mixtures that contain various additives that prevent the appearance of fungus. This composition has a very high adhesive power.

Application of the composition

For velor, textile or glass coatings, you can use a dispersion composition, which is also suitable for vinyl paintings for painting. Its main advantage is increased strength and moisture resistance.

Operation "liquidation"

Often the glue leaves traces with outside canvases. How to fix the problem?

For this you will need:

• soft rag;
• warm water;
• spray;
• stain remover.

Need to dial warm water into a spray bottle and spray it into the place where the composition spilled. Wait for the surface to get wet and wipe gently with a soft cloth. Don't overdo it! If the canvases are thin, you can completely ruin them.

If the glue has not yet hardened, try to remove it from the surface as soon as possible, and wipe the place with a damp cloth.

There is also a special stain remover that allows you to remove unsightly stains from the walls.

• paste Dr. Beckmann;
• Udalix Ultra.

Outcome

Approach the choice of glue with special responsibility, consider the recommendations of wallpaper manufacturers and the type of surface.

We hope our article was useful to you. In order to more accurately understand the technological and practical matter, on our website there is a detailed photo and video instruction in which you will find useful information on this issue.

If you have decided to paste the walls with vinyl wallpaper, then you need to be prepared for the fact that this is quite laborious process. First of all, due to the fact that the material is heavy and difficult to apply to the wall. But if you know all the subtleties of working with this wallpaper coating, then you will definitely be satisfied with the final result.

Coating Features

Vinyl wallpapers have gained great popularity primarily because they are distinguished by bright colors, and also have excellent wear resistance and can even be wiped or cleaned of dirt with a damp cloth and detergents. This wallpaper coating is a polyvinyl chloride film of various colors, which is applied directly to the prepared base, usually non-woven or paper.

More such wallpapers can be found under the name "foamed", since they are applied to the base by pressing the mass under the influence high temperatures for deeper relief patterns.

Among all varieties of vinyl wallpaper, you can find the following wallpaper options:

• dense - top coat sufficiently wear-resistant to mechanical damage, as a rule, such wallpapers are produced on a non-woven basis;
• silk-screen printing - the dense upper texture of the coating has a pronounced shine and silkiness due to the presence of silk or synthetic threads in the composition, as a rule, on paper basis despite this, they have good wear resistance;
• foamed vinyl - the most durable of all varieties, excellent wear resistance to mechanical damage, is made on a paper and non-woven basis.

Almost all vinyl coatings have two or three waves on the label, which means they special moisture resistance and the ability to wash the wallpaper with household chemicals. Most major manufacturers use latest equipment, which allows you to produce environmentally clean materials. Therefore, such vinyl wallpapers are fire resistant and do not have a specific smell that can harm a person and the environment.

Among the disadvantages of such coatings, it is worth noting them poor breathability. Therefore, they are recommended to be glued in rooms where you will spend the least time, for example, corridors, bathrooms, kitchens, etc.

Although for a dining room or, for example, a living room, you can choose models with silk-screen printing, since the paper base is more susceptible to the penetration of air masses.

How to choose an adhesive composition?

Currently on Russian market a huge selection of glue for any type of wallpaper. And this is no coincidence, since manufacturers of adhesive compositions take into account the wallpaper material, its features and application technique. This must be taken into account when choosing an adhesive composition for wallpaper.

Incorrectly selected glue can ruin all your work, for example, wallpaper in best case peel off or not stick to the wall at all. Therefore, it must always be remembered that o for heavy vinyl wallpaper it is better to choose a special adhesive suitable for this type of coverage.

When buying glue, first of all, pay attention that its label says: “for vinyl wallpaper” or “for heavy wallpaper”. This material is ideal for paper-based and non-woven wallpaper. This glue is always based on modified starch and various additives that can not only enhance the adhesive properties of starch, but also protect walls and coatings from fungi, mold and insects. Often, the adhesive composition has high sliding properties, which allow you to adjust and align the canvases directly on the wall, which is very important when working with a vinyl coating, especially on non-woven fabric, since it is much heavier than a paper base.

Some manufacturers produce adhesive mixtures with pink or blue indicator. Do not worry in advance, in the process of drying, these colors become transparent. Such an indicator is needed so that the glue is clearly visible on the wall or wallpaper, so as not to accidentally miss a non-smeared area. Otherwise, the wallpaper simply will not stick, and the work will have to be done again.

If you are as decorative elements If you use borders (made of paper, fabric, vinyl), apply them both to wallpaper and walls, then in this case you also need to choose the right adhesive. For these purposes, you will need a special curb glue. It is produced by various manufacturers, some even supply jars with a brush or spatula for convenience, with which it is convenient to apply the mixture to the coating.

Is it possible to glue vinyl wallpaper on non-woven glue?

If you have stumbled upon non-woven adhesive for vinyl wallpaper, then do not get upset ahead of time. The main composition for such glue is the same, as a rule, it is modified starch, methylcellulose and various anti-fungal and mold ingredients. The only difference is that a special sliding additive is not added to the non-woven adhesive, as for glue for vinyl wallpapers. In this case, the wallpaper will simply slide a little worse on the wall, but this is not a critical parameter. In any case, the coating will adhere well and will not cause you unnecessary problems.

Also, non-woven wallpaper glue is suitable for paper-based coatings. Only the mixture will need to be made a little thinner than indicated in the instructions.

But here you need to remember one thing that the glue for the paper base is categorically not suitable for vinyl wallpaper on non-woven. Since the liquid structure of the adhesive mass will not be able to hold a heavy canvas on the wall.

How to breed?

For high-quality gluing of wallpaper, it is necessary to properly dilute the adhesive powder. Instructions for use must be indicated by the manufacturer on the packaging. As a rule, the mixture is diluted with ordinary water until a homogeneous mass is obtained. Next, we describe the whole process in more detail to prevent errors in the process:

• Prepare a clean, deep container for diluting the glue, such as a bucket.
• Add to it required amount water indicated on the package. Please note that the water must be slightly warm, about 30 degrees.
• Stir the water with your hand or a stick (spatula) so that a funnel forms in the center.

• Pour the glue powder slowly into the funnel, vigorously stirring the liquid with a stick. It is important to mix the adhesive mass thoroughly so that lumps do not form. If this could not be avoided, it is necessary to strain the mixture through a building sieve or several layers of gauze.
• As a result, you should get a homogeneous mass of dense consistency, which must be allowed to stand for 15-30 minutes (the exact time is indicated by the manufacturer). During this period, the mixture swells and acquires the necessary adhesive properties. After that, you can use the adhesive mixture for its intended purpose.

You must remember that for vinyl flooring the glue must be thick, as this structure is able to withstand heavy wallpaper and keep it firmly on the wall.

How to use?

In order to properly paste over the room and avoid unpleasant consequences after the work (peeling off the canvases or lagging behind the walls), it is necessary to carry out preparatory work. To do this, it is necessary to clean the surface of old coatings. If there are defects on the walls, for example, cracks, they are masked with plaster and putty. If it's necessary, carry out the procedure for leveling the concrete base.

On the prepared walls, it is necessary to apply glue (for non-woven vinyl wallpaper) using a construction roller or brush. For a paper base, the adhesive mixture is applied both to the back of the wallpaper and to the wall. When sticking, no need to rush, it is necessary to carefully apply glue to the canvas or surface to avoid embarrassing things in the future.

The wallpaper should be pressed tightly against the wall with a soft cloth or napkin, you can walk on top with a clean roller so that the materials adhere more reliably and tightly. Dries glue under vinyl wallpaper longer than usual. This is due to the poor breathability of this material. So don't worry after about 12-16 hours, maybe a little more, the glue will dry completely, and will hold the wallpaper securely.

If you did not immediately use the entire adhesive mixture, cover the container in which it is located with a lid (or tie it with polyethylene) to prevent various debris and dust from entering. In this form, the glue can be stored for up to 10 days (depending on the manufacturer). You can use it at any time during the specified period. Finding out that the mixture has become unusable is very simple, it becomes liquid and loses all adhesive properties.

Manufacturers overview

• Metylan ("Methylan") premium vinyl is a popular product for vinyl wallpaper. The mixture has good adhesive properties, it also contains antifungal additives. A big plus is the presence of a pink indicator, thanks to which you will not miss any areas that are not missed. The average price of one pack is from 150 to 200 rubles.

Glue consumption is average, enough for about 4 standard rolls. Consumer reviews are mostly positive, some say that the mixture quickly clumps during the preparation of the glue and the solution has to be filtered.

• Kleo ("Cleo") smart vinyl is one of the most popular materials for heavy wall papering. It has good adhesion and sliding properties, which allows you to adjust the canvas on the wall, it contains antifungal additives. This is one of the most economical options, glue is enough for 7-9 rolls standard size. The average price is from 180 to 230 rubles. Judging by consumer reviews, Cleo is one of the best on the Russian market.

• Quelyd ("Kelid") specialty vinyl is also a popular brand today. The glue is distinguished by the presence special additives in the composition, which allows it to be used in wet rooms, well transfers intensive washing of wall-paper, possesses antifungal effect. The average price of one pack is from 120 to 170 rubles. It is not used very economically.

Whatever high quality the wallpaper did not differ, from time to time they still have to be changed. By virtue of various reasons they are subject to wear, which, in turn, negatively affects their appearance. Admit it: after all, how the decorative layer of wallpaper looks is extremely important for each of us. That is why they have to be re-glued periodically. Today we will talk about glue for vinyl wallpaper on non-woven and paper base, as well as what kind of wallpaper adhesive better fit for quality adhesives.

Why vinyl based wallpaper? There are several explanations for this. First of all, because they have significant advantages compared to some similar coatings:

• Durability of operation.
• Possibility of painting ().
• They can be washed periodically, which is important for rooms such as a kitchen or corridor.
• A wide range of products available in stores.

Be that as it may, PVC coatings belong to the class of "heavy wallpaper". It should also be remembered that, as a rule, in order to stick one or another type of wallpaper, you will need different types of adhesives. PVC is no exception. By the way, to be precise, vinyl is the outer decorative layer that we see and which is on the surface. As for the inner layer, also known as the "base", then for it, in most cases, paper or interlining can be used. We will talk about the features of each of these types of materials below.

paper base

Once upon a time paper wallpaper were the only coating for wall and interior decoration that was available to most citizens. Today the situation has changed. However, paper-based wallpapers still do not lose popularity. Moreover, paper is quite often used for the production of wallpaper with decorative coating made of other materials, in particular vinyl.

Like any other material, paper-based wallpaper has both advantages and certain disadvantages. The advantages include features such as:

1. Low price.
2. Simple installation, which can be done without problems with your own hands.
3. Environmental Safety.

Now let's list some of the cons:

1. They are not as durable as some other counterparts.
2. Subject to various mechanical damage.
3. They cannot be used for painting.
4. They are not .

As a rule, for simple paper sheets, such a composition as a well-known paste is quite suitable. However, in the case of paper-based vinyl wallpaper, you should opt for special adhesives. Among the most popular brands you can mention Cleo, Kelid, Moment, Dyvotsvet.

non-woven base

In addition to the paper-based material mentioned above, non-woven vinyl wallpapers are very common on the market for decoration and interior decoration. Due to the specifics of the material, it will be easy for even an inexperienced layman to stick such canvases. We must not forget about numerous benefits, which such wallpapers possess.

Must see interesting video instructions on how to glue non-woven vinyl wallpaper:

So, in addition to the simplicity of gluing, which can be done independently, this type of wall paintings is distinguished by such a feature as the preservation of integrity with some change in the geometry of the walls. To make it clearer, we can give an example. Most of the new buildings, over time, give a certain shrinkage, which is accompanied by a slight change in the geometry of the seams (in the case of large-panel housing construction). But even buildings that were built using frame-block technology or simply classic brick houses with interfloor floor slabs are also subject to similar phenomenon. For this reason, most types of modern roll wallpaper can be deformed, or, more simply, torn at the joints. So, canvases made on the basis of non-woven fabric are not subject to such damage, since they are able to stretch to some extent, adapting to changes in the geometry of the building and premises.

On a note! To a large extent, the ease of installation is due to the fact that glue can only be applied to the wall. It is not necessary to smear the canvases with adhesive composition.

Majority well-known manufacturers produce separate lines of glue, which is intended exclusively for non-woven vinyl canvases. Which one is better? It is difficult to say, since a serious analysis of the technical and consumer characteristics of products is needed to answer this question. In any case, the quality of products manufactured by market leaders is at high level. Among the most popular options are such as Methylan, Quelyd and Kleo Extra.

Glue Features

It should be noted that even among all types of adhesives that are produced for vinyl wallpaper with a non-woven base, there is a significant number of special formulations designed for use in some specific conditions. That is why it is advisable not to rely on independent choice, and inform the consultant about what kind of wallpaper you are going to glue, as well as tell other points. In this case, the store employee will be able to choose exactly the glue that you need. In any case, when gluing, it is advisable to use a special adhesive solution, and not a universal adhesive for all types of wallpaper coverings.

How to determine the best glue? In fact, this is quite simple, since such a composition has certain characteristics. So which product is the best? As for manufacturers, as noted above, these are products offered under trademarks Kelid, Cleo, Metilan. These manufacturers have long and firmly occupied the first places in the sales ratings of specialized online wallpaper stores and large construction supermarkets. Let's briefly list the main character traits high-quality adhesive composition:

• With proper stirring, lumps and clots do not form.
• Stored in the package for a long time.
• Can be used as an extra.
• Is different increased level safety for human health.
• Once cooked, it can be stored for several days.
• The cooking process to the desired consistency is simple and understandable even for a non-professional. Just read the instructions and follow them.

Well, now let's talk a little more in detail about how to dilute such glue and what is typical for its preparation.

How to cook and calculate consumption

In fact, there are no difficulties in preparing the adhesive composition for vinyl wallpapers, since any manufacturer supplies each product package special instruction telling about how to do it right.

Attention! In cases where the adhesive solution will be used, its consumption will be slightly higher compared to its intended use, i.e., for wallpapering.

Speaking very approximately, then one package of dry glue is enough, on average, for 4-5 rolls standard width(note that you can often meet and). In any case, when calculating the consumption, it is advisable to be guided by the information specified in the instructions supplied by the manufacturer, which takes into account the characteristics of a particular type of material. In addition, you can look for reviews and recommendations from experienced professionals on the Internet or even among your own acquaintances. By the way, it also indicates how to properly mix and prepare glue for vinyl wallpaper. In any case, after you mix the composition, it will be necessary to wait some time before you can use it for its intended purpose. As a rule, no more than 10 minutes.

How to glue non-woven vinyl wallpaper

Modern market building materials filled wide choice all kinds of wallpapers with different textures and colors. Recently, non-woven vinyl wallpapers have gained wide popularity, which is due to the durability and high strength and aesthetics of this material.

Non-woven vinyl wallpapers are present on the building materials market in two types: wallpaper with and without a pattern. The material of such a structure does an excellent job of masking minor defects or flaws in the walls that remain after the repair work. In addition, these wallpapers are different simple process gluing, so the decoration with vinyl wallpaper can be done independently without the help of craftsmen.

Vinyl and interlining

Today, wallpapering is a process that has long been familiar to everyone. Heavy vinyl non-woven wallpaper is a wallpaper made on the basis of fabric, and they are practically no different from non-woven wallpaper. In addition to aesthetics, the main quality of such wallpapers is the possibility of washing them with conventional means.

An important point: such wallpapers have universal advantages, since they can be painted if necessary. special paints. At the same time, you can repaint such wallpapers up to fifteen times.

Those who are interested in how to glue non-woven vinyl wallpaper first of all need to study the properties of this finishing material. The indisputable advantage of the material is the ability of foamed vinyl to hide all surface defects of walls and ceilings. This means that work on preparing the walls for gluing can be omitted if the surface does not have obvious flaws. It should be borne in mind that all wallpapers of this type are divided into heavy and light, and at the same time they have a different structure, density and weight.

How to properly glue vinyl wallpaper - stages of work

Almost everyone at least once in their life had to glue wallpaper on their own. However, not everyone knows the subtleties of sticking vinyl wallpaper and whether it is possible to glue wallpaper on vinyl wallpaper. Of course, the pasting process itself is quite simple, but, as a rule, takes a lot of time. Pasting wallpaper is a process that has a number of nuances that should be considered during execution. As for vinyl wallpaper, many undertake to glue this wallpaper on their own, and therefore it is necessary to know how they differ from simple finishing materials in the first place. It is important to remember that in no case should this type of wallpaper be stretched in width, since after drying they will begin to shrink, after which gaps will appear between the joints of the strips. If this is possible, then the use of a spatula becomes strictly prohibited.

Pasting the surface with non-woven vinyl wallpaper occurs in several stages:

• surface preparation work;
• wallpaper preparation (includes cutting into strips and joining the pattern);
• mixing the adhesive;
• gluing process;
• drying wallpaper and glue.

It should be noted that when working with non-woven vinyl wallpaper, a soft, rubber spatula is best suited. Such a tool will be most convenient to smooth the seams. To minimize stretching, spread on strips of wallpaper less glue, since when gluing vinyl wallpaper, the consumption of the adhesive composition is much less than when working with a conventional one, paper material. Having completed Finishing work, should be created indoors while the wallpaper dries, the necessary conditions, as this material is very resistant to drafts and high humidity.

Foundation preparation

Before moving on to pasting the walls with vinyl wallpaper, you should pay a little attention to preparing the walls. In general, preparation work is very similar to preparing walls for gluing. ordinary wallpaper, except that here such work may not be needed at all if there are no serious defects. Main feature preparatory work under vinyl wallpaper is that you can not putty the walls with materials based on PVA, since these wallpapers do not tolerate it. Another feature is the need to apply an additional layer of wallpaper, while ordinary wallpaper needs only one layer of primer. However, such a moment applies only to the situation when they are glued, there will be heavy wallpapers. For gluing light wallpaper, you should thoroughly prepare the surface, not forgetting to remove all bumps, cracks or bulges. If a decision is made to pre-apply putty on the walls, this should be done carefully to exclude the possibility of it falling off.

We prepare wallpaper

When pasting, attention should also be paid to the preparation of wallpaper, namely, they must be cut into strips and match the pattern, if any. To do this, unwind a roll of wallpaper and cut off strips of the desired length, while taking into account that approximately 100 mm will go to overlap. In the event that there is a pattern on such wallpaper, then the stripes should be matched so that it does not tear.

Gluing stage

Non-woven vinyl wallpapers are always glued end-to-end in such a way that they do not stretch. It is necessary to start gluing from the corner of the room of the wall that is located near the window. In order to stick the first strip strictly vertically, you must first draw markings on the wall using a level. Due to the fact that such wallpapers are quite dense, when pasting, it is necessary to coat with glue not only the surface of the wall, but also the wallpaper itself. At the same time, you need to smooth them with a soft fur roller with gentle movements.

An important point: in the event that the instructions that are attached to the wallpaper or glue do not contain specific instructions, after greasing the canvas, it is necessary not to touch it for ten minutes. This is necessary so that the glue can be properly absorbed into the dense structure of the finishing material. Below are a few useful tips by pasting:

• it is best to spread several strips of adhesive at once. This will help to significantly speed up the entire pasting process, since it will not be necessary to wait until the next strip is saturated;
• experienced craftsmen recommend for better absorption of glue, try to apply it evenly with a soft brush. Special attention should be given to the edges, smearing them as carefully as possible;
• vinyl wallpaper is best glued to more than one, as then the process will be significantly delayed.

After smearing the strip and absorbing the glue, it must be pressed against the surface with gentle movements and with the help of a roller remove all the air from under it, swiping from top to bottom. If you omit this action, then after drying, the wallpaper will swell, and they will have to be cut and repaired. If, nevertheless, air bubbles have formed on such wallpaper, they can be removed using a syringe with glue, which must be driven into the air bubble, squeeze the glue into it, and then gently smooth it out.

The process of gluing vinyl wallpaper on a paper basis

In order to understand how to glue paper-based vinyl wallpaper, you need to start with the simplest. Compared to non-woven wallpaper, these wallpapers are lighter and therefore easier to glue. As with any other type of wallpaper, the surface of the walls for this material should be prepared. From how smooth and even the walls depend on the aesthetics and general form finished room.

If there is an old coating on the walls, it should be dismantled and the walls thoroughly cleaned. After that, the wall should be puttied, preferably in several layers, since it is quite possible that the wall may be slightly translucent through paper-based wallpaper. After the putty has dried, the walls must be well primed and allowed to dry.

Next, you should dilute the glue and it is advisable to immediately coat the entire room with the resulting composition, or rather, the walls and ceiling, on which paper-based vinyl wallpapers will be glued. This is necessary so that the walls nourish the glue and the wallpaper sticks more firmly.

Before starting pasting, you need to draw a straight vertical line along the entire height of the wall. It will serve as a guide for smooth gluing. Then you need to cut the wallpaper canvases and match them according to the pattern. Despite the fact that this type of wallpaper is not as dense as non-woven wallpaper, when pasting it is necessary to coat not only the walls, but also the stripes. Immediately before gluing the canvas, the wall must again be smeared with adhesive. After that, you can fit the strip and smooth it with a special roller. You need to be very careful when smoothing the paper-based wallpaper, as it can stretch..

Adhesive selection

For those who are interested in whether it is possible to glue non-woven wallpaper vinyl adhesive, you need to know that each type of wallpaper should be glued with a special glue. There are special adhesive compositions designed specifically for pasting a room with vinyl wallpaper. However, vinyl wallpaper adhesive is suitable for any substrate. Accordingly, they can be glued to both non-woven vinyl wallpaper and paper-based vinyl wallpaper. At the same time, it will not cause damage to strength and durability.

The advantage of such an adhesive is its high sliding ability, therefore, using such a composition, it is very easy to join the sheets together. According to the instructions, such glue can be used after three minutes have passed from the moment of kneading. AT closed such a composition can be stored for no more than eight days.

Also, according to the instructions, it is impossible to paste wallpaper if the temperature in the room where the repair is being carried out is below thirteen degrees. You can start pasting only after the temperature in the room has reached at least 20 degrees.

How to glue vinyl wallpaper video