Brick fight: what is it and how to use it? How to use broken bricks in the country

We continue to consider important topic maximum use of resources at the construction site. On the agenda is a brick fight.

is a material consisting of stones and chips obtained by dismantling brick building structures or from waste production of building material (defective brick factory), photo 1.

Photo 1. Brick fight

Brick fight or brick chips - where they use, dignity

At the industrial level, brick fighting is produced by using special crushing machines. The brick fight is then sifted into fractions. Brick scrap can be bought at crushing and screening complexes or brick factories. Also, the brick fight remains on the construction site after masonry works in the construction of walls and partitions of buildings.

There are the following types of brick fight depending on the faction size:

  • screening - particle size 0 ... 10 mm;
  • fine fraction - particle size 0 ... 20 mm;
  • middle fraction - particle size 20 ... 40 mm;
  • coarse fraction - particle size 40 ... 100 mm or 40 ... 70 mm;
  • sometimes there are fractions of brick battle with particles of 0 ... 100 mm and 0 ... 300 mm.

The relevance of the use of brick fighting is growing every year for several reasons:

  1. The high cost of crushed stone and other aggregates.
  2. A large number of dismantled old brick buildings and buildings.
  3. Purchased private plots often have brick buildings that need to be dismantled, and you need to spend extra money for the removal of construction waste.
  4. When performing masonry work, there is always a brick battle and rubble.

Depending on the material from which the resulting brick battle, there are the following types of it:

  • red brick brick fight;
  • brick fight out silicate brick;
  • brick battle from fireclay bricks.

The most common option is a red brick battle. Silicate brick batt has low frost resistance.

Where can you apply a brick fight?

Options for the use of brick fighting at a construction site:

  • as a material for backfilling dirt roads, temporary access roads to a construction site;
  • as a backfill for the foundation of garden paths;
  • as backfill for wells, pits, trenches, gaps between the foundation and the ground;
  • as an additional or main aggregate for concrete (making foundations for small buildings, concrete walkways, foundation for a fence, etc.);
  • as a filler in three-layer walls (for example, during the construction of well masonry walls) to increase the sound and heat insulation properties of the wall;
  • as a soundproof backfill for wooden floors;
  • how decorative material for decoration flower beds, alpine slides;
  • for strengthening soils on slopes;
  • as a drainage layer on wetlands.

Photo 2. Scope of brick battle and brick chips

Benefits of using brick fight

  • low cost (significantly reduces the cost of concrete);
  • sufficient strength characteristics;
  • relatively high frost resistance of the material;
  • sufficiently high sound and thermal insulation properties material.

Konev Alexander Anatolievich

Brick as a building material has been used for many centuries. Brick breakage is obtained during the demolition of old brick buildings and engineering structures, as well as during the rejection of defective products directly at factories. A small percentage of the fight inevitably occurs during masonry.

In any city, a lot of buildings that have served their time, most of the five-story "Khrushchev" buildings, according to which, so far, only in Moscow, a housing program for the resettlement of residents with the demolition of old buildings has been adopted, is also made of brick. Huge volumes of concrete and brick battle are obtained. It is unprofitable and inexpedient to dispose of this raw material, as it happened before, therefore, more and more enterprises and industries appear, where raw materials are crushed using special equipment.

The obtained secondary material can be successfully used in many areas of construction. Consider what secondary brick raw materials are and where it can be used.

Types of secondary brick raw materials

Brick battle retains all the basic properties of the primary material. There are the following types of combat:

  • ceramic, characterized by low moisture absorption, good performance in frost resistance and high density. Weight m³ from solid feedstock 2000, and hollow up to 1400 kg;
  • silicate, has low frost resistance and absorbs moisture well. The weight of m³ of pebbles from materials that do not contain voids is 1.8 ... 1.95 tons, and the weight of hollow products is from 1.1 to 1.6 tons;
  • fireclay, characterized by high refractory properties and low ability to absorb moisture.

The battle building bricks, according to the size of the obtained pebbles, is divided into the following fractions:

  • small - ≤ 20 mm:
  • medium - 20 ... 40 mm:
  • large - from 40 to 100 mm.

Before separation into fractions with the help of special sieves, the raw material is thoroughly cleaned of foreign inclusions and debris. In individual construction, an uncleaned brick battle can often be used, containing parts different types brick materials, concrete inclusions and reinforcement.

The thermal conductivity of all considered varieties is characterized by close values.

The increase in demand for scrap is due to the following reasons:

  • constant growth of the already quite high cost of aggregates (crushed stone, gravel, natural sand, expanded clay and others);
  • in the process of masonry, a brick battle is always formed;
  • on many sites purchased for individual construction, there are old buildings that have served their time, interfering with new construction and subject to indispensable dismantling. It is easier to use the obtained secondary raw materials than to incur additional financial costs for its removal from the site;
  • constant growth in the city of buildings to be dismantled.

Available pros and cons of using

Advantages:

  • waste cost after dismantling brick buildings with your own hands and significantly lower, compared with other aggregates, when buying ready-made scrap;
  • sufficiently high strength indicators, higher than those of cellular concrete and wood;
  • good heat, sound insulation and frost resistance;
  • incombustibility and not maintaining active combustion;
  • applicability regardless of weather conditions;
  • brick fight provides good drainage;
  • environmental friendliness, due to the manufacture of natural ingredients, with 100% safety for human health and the absence negative impact on the environment;
  • light weight of the material that does not require the use of special technical means and causing simplicity and speed of delivery to the installation site.

Disadvantages: it can be used for laying walls, but the work is highly laborious and time-consuming, each brick will have to be cleaned of the remnants of the old mortar. There is also a significant increase in the consumption of new mortar and mandatory reinforced masonry reinforcement to avoid cracks.

What can be made from recycled material

  1. Arrangement of heat and sound insulating backfill during the installation of well masonry walls. Often used silicate chips.
  2. In the construction of local roads, as a base for the main coating, especially in swampy areas. Granite gravel is poured over the scrap, on which asphalt is laid. On such roads, it is permissible to add purified fractional crumbs in the preparation of an asphalt mixture. in winter and late autumn temporary roads to countryside can be built entirely from broken bricks.
  3. Backfilling of the road to suburban areas with ceramic quarry, backfilling of pits and potholes during the repair of the constructed existing road.
  4. Strengthening the soil on steep slopes.
  5. Apply as drainage layers in swampy soils, the underlying layer in trenches when laying engineering communications.
  6. Used when pouring a blind area around the perimeter of buildings.
  7. Temporary broken brick road to construction sites. Such an entrance will last for several years, and then it can be used as a base for laying a permanent coating.
  8. large pieces ceramic products good at performing various landscape works. Can be built alpine slide, using scrap as a reinforced base, issue garden beds, the banks of a dry stream or garden paths. Small fractions are used to backfill the tracks, and original patterns and compositions can be laid out from medium and large ones by tamping the crumb into a compacted sand preparation or cement-sand mortar. In this case, only clinker, hyperpressed or high-quality scrap can be used. ceramic brick which guarantees the durability of the coating.
  9. A durable road to the site, in the absence of significant loads that can last more than 10 years, can be obtained using fragments of clinker material.
  10. Fireclay material crushed into various fractions is used as a filler in refractory mortars.
  11. For the manufacture of gabions - rectangular boxes filled with stone rubble and broken bricks made of steel mesh.
  12. Replacement of rubble brick fight when cooking concrete mixtures. Concrete high class it will not be possible to obtain, but for non-responsible structures such a mixture can be used subject to following conditions:
    • only ceramic scrap is suitable:
    • be sure to break the pieces with a sledgehammer to medium grinding;
    • it is permissible to add no more than 1/3 of the volume of crushed stone;
    • such concrete should be concentrated in the middle of structures to reduce moisture absorption.
  13. It is unacceptable to arrange a broken brick foundation for residential buildings, but it can be used for various non-essential outbuildings, fences, recreation areas, gazebos, etc. Often broken brick used when installing fence posts. To do this, after installing the pillar, a brick battle is poured into the pit with the pillar installed, compacted and poured cement mortar. This is a simple, reliable, durable and cheap solution.

In conclusion: secondary brick raw materials, due to the cheapness of the material, can be rationally used, but only in the construction of structures without mandatory compliance with the requirements of GOST and building codes and rules.

Brick is one of the oldest building materials, which was used by mankind during the construction period ancient rome. Only then it was sculpted by hand, and today the production of this material is fully automated and carried out in incredible volumes. Apart from basic types: silicate and ceramic, it is desirable to highlight the broken brick. You can get it by sorting out old masonry. Often the battle consists not only of fragments of brick, but also elements of cement. Despite the fact that it is perceived by many as garbage, it is still actively reused in the construction industry and demonstrates excellent practical characteristics.

Most often this combination of materials is used for repair work pavement. But for these purposes, only the option that has been tested for suitability and contains additives of different fractions is suitable. Many use broken brick instead of rubble to create country paths, fill up the foundation of a house in a swampy area, or simply solve problems with poor-quality asphalt or a flooded area on the roads or in the yard.

Important: to fill a swampy surface or other area with increased level water resources, should be pumped out excess water, otherwise attempts to compact the territory will be useless. To do this, you need to buy a hydraulic motor http://ukrintroservis.com.ua/katalog_produkcii_gidravlika_gidronasosi__gidromotori.html with a hydraulic pump and get rid of water as much as possible. Only after this procedure can the strengthening process be continued. In the private sector, there will always be a use for broken bricks, so all construction waste or damaged materials are not thrown away, but are carefully stored for long-distance use at the right time.

It is worth noting that experts recommend using broken brick instead of crushed stone when there is no serious load on the main object. The popularity of the substitute material has increased due to affordability and excellent operational properties, because if you plan to build a compact small summer house, he does not need increased durability, and there is simply no need to use expensive gravel. Many designers have only recently discovered the aesthetic potential of brick battle, so today they use it to create landscapes and interesting exterior objects.

The article was created with the assistance of the company "UkrIntroService".

In this article, I want to tell you about lavender and give you a few recipes that I am very sensitive to.

As you probably already understood from my previous posts, I love lavender very much and quite often add it to meat and fish, and also add it to desserts. Most people know lavender exclusively from herbes de provence, but there are so many amazing recipes with it.

Lavender, or as the French call it "blue gold", has been growing for several millennia on the coast mediterranean sea. Historians have found a lot of evidence that since the time of the Roman Empire, lavender has been used not only in medical purposes but also as a culinary supplement. Queen Elizabeth I of England drank lavender tea as a cure for migraines and liked to add lavender to her meat dishes. You can read about it in many English cookbooks. But only in the 20s of the 20th century began to produce lavender in industrial scale and dried flowers became available to residents not only of the Old World.

Of course, it may not be worth bothering with growing lavender in the country, but believe me, if you still decide to take this step, you will plant every year on your own. household plots these beautiful and fragrant flowers. We put pots of lavender around the gazebo and in the evenings it smells amazing.

It is still unclear where lavender comes from (some biologists write about Persia, Egypt, Italy, Greece or even Spain), but currently in in large numbers it can be found in French Provence. Most varieties of lavender tolerate harsh climates well. For example, varieties such as English lavender like Lavandula angustifolia officinalis (also known as True Lavender or Vera) and the L.x intermedia Provence hybrid tolerate both heat and severe frost. Most chefs around the world use the Angustifolia variety when cooking, with a very delicate aroma and taste. It is said that this particular variety was supposedly created for use in desserts. Just recently, I came across an article in the NY Times in which a famous American chef told how he smoked chicken. To my surprise, he used L. intermedia grosso lavender flowers. If you want to plant this wonderful culture on your site, pay attention to these varieties.

If you've never tried adding lavender to your food before, start with just a little, just add some flowers to your favorite dish. You will give a new breath to any dish, whether it be steamed vegetables, cookies or duck breasts.

Lavender salt (dry version)

1 teaspoon dried lavender flowers

1/2 cup coarse sea salt

Finely grind the lavender in a mortar and add salt to it. Transfer to an airtight container and store in a cool dry place.

Use this mixture to marinate meat and fish, including chicken and duck, and fish fillets. This mixture goes well with meat. Rub it on a piece of meat, place in an airtight container and refrigerate for 3-4 hours before roasting.

This salt is ideal for use with lavender margaritas, bartenders usually rub the sides of their glasses with it (see my Lavender Margarita recipe)

Lavender salt (wet version)

2 teaspoons dried lavender flowers

2 teaspoons coarse sea salt

2 teaspoons olive oil

2 teaspoons finely minced garlic

1 teaspoon fresh rosemary leaves (finely chopped)

Grind the lavender with salt using a blender. Transfer to a mortar and grind with oil, garlic and rosemary. At the very end, put the remaining salt and mix gently.

Just like her younger sister, this salt is a very useful and necessary seasoning, especially in summer season grills. Just rub the meat with it before you cook, bake or smoke it.

Tropical fruit gazpacho with lavender

I have made this gazpacho more than once. It is perfectly refreshing in the summer heat and, most importantly, does not require any effort to prepare.

300 ml water

100 gr granulated sugar

1 teaspoon dried lavender flowers

200 gr raspberries

juice of half a lemon

400 gr strawberries

120 ml coconut milk

300 gr pineapple

4-6 sprigs of mint

Put water, sugar and lavender in a gravy boat. Bring to a boil and boil for 3 minutes, remove from heat and remove the lavender flowers, they have already given up their aroma. Using a blender, blend strawberries (half serving), raspberries, mango, papaya and lemon juice. Combine with cooled lavender syrup and add coconut milk and finely chopped kiwi. Stir and add the 4-piece strawberries.

Broken brick instead of gravel?

Chill for 2-3 hours in the refrigerator and serve in margarita glasses, garnished with pineapple slices and fresh mint leaves. This is delicious!

marinade for steak

250 ml dry white wine

1 tablespoon lavender honey

1 tablespoon Dijon mustard

1 teaspoon lemon zest

1 tablespoon lemon juice

1 teaspoon ground black pepper

1 teaspoon dry lavender

1 teaspoon salt

Mix all ingredients and rub your steak. I usually marinate from 6 hours to 12 (overnight is best)

This is delicious!

Marinated shrimp

This recipe is very simple, quick and perfect for any time of the year. Lavender honey is quite difficult to find In Russia, you can use any.

5 tablespoons lavender honey

2 tablespoons dried lavender flowers (crushed)

2 tablespoons olive oil

1 teaspoon wine vinegar (preferably white)

1 teaspoon lemon juice

1 freshly squeezed tangerine or red orange juice

6 garlic cloves (chopped)

ground black pepper

for shrimp:

2 cups dry white wine

1 onion medium size

half a lemon

half an orange or tangerine

1 teaspoon peppercorns

1 tablespoon coarse sea salt

1 kg large shrimp

1 bay leaf

To make the marinade, in a small bowl, combine honey, lavender, oil, vinegar, lemon juice, and everything else. Salt and pepper to your taste. The marinade is ready.

Pour water and wine into a saucepan, add onion, lemon, orange, salt, pepper and parsley. Boil 5 minutes. Add shrimp and cook for another 3-5 minutes until tender. Drain the shrimp in a colander and let cool for a few minutes. Then transfer to a bowl with marinade and mix. Let cool and transfer to an airtight container. Put it in the refrigerator overnight. Serve like cold appetizer. This is delicious!

My advice: clean the shrimp before cooking, it will taste better and marinate evenly

Tip: Dry lavender stems can be used as skewers for grilled meats. It will give your products an unforgettable flavor.

Tip: For more strong aroma lavender grind the lavender in a spice mortar, it will release some oil

In this post, I practically did not use food photography, this is already enough in my magazine. All photos show lavender that grows in our garden. Next time I will write some more proven recipes with lavender and tell you how to dry it at home.

The use of broken bricks

IN modern construction widespread use of recycled materials. These include the battle of bricks, which has a wide scope.

  1. Manufacturing and application

Features and types

Skol artificial stone occurs as a result of the demolition of old buildings and structures.

Broken brick or rubble

In addition, it often happens in production, due to the release of low-quality batches. It can be different, depending on what type of products it turned out:

Skol is also classified by fractions. It can be small - from 5 to 20, medium - from 20 to 45 and large - from 40 to 90 mm.

How to make your own and what you can use

The battle of concrete and brick free of charge with pickup is provided by some construction organizations. However, we are talking about products containing pieces of rebar, cement, and so on. It is advisable to use it only for rough work, for example, for filling a pit. Manufacturers, as a rule, sell chipped bricks for not very high price, but you can not overpay for something that you can do yourself. If you have material left after dismantling the stove or fireplace, masonry or foundation, you can turn it into battle yourself.
They do this in several ways: the first involves mechanical impact on products using a sledgehammer or scrap, it is not recommended to use it for fireclay and silicate species. The second requires the presence of stone crushing equipment, which can be made by hand, purchased at a specialized store or rented.

When laying the foundation in a private house, you can use a chipped artificial stone to organize a pillow or mix it with a cement-sand mixture to give it strength. For these purposes, it is better to take small and medium fractions. For the base, it is better to use a ceramic or hyper-pressed batt, which should be poured with water and carefully compacted. When strengthening the foundation, you can use a chip of a small fraction of any products that are mixed with concrete. This is only advisable if the plinth will subsequently be subject to decorative finishing.

A chipped artificial stone can also come in handy when arranging garden paths.

You will be able to significantly save on the purchase of crushed stone and slag if you make a pillow for paving slabs from recycled material.

It is laid directly on the sand and well tamped with the help of improvised means so that the tile lies on the pillow as evenly as possible.

Cost in Moscow and the region

You can buy a brick chip with delivery in one of construction organizations or by contacting the manufacturer at the price indicated in the table in rubles per m3:

Is it possible to build a house from old bricks

Prices in construction stores they are very “bite” on materials, it is for this reason that people with low incomes purchase used options. This choice is much cheaper and plus to this old brick often happens even best quality than new. So, preferences for used materials you not only save, but also acquire quality blocks. True, not everyone is sure whether it is possible to build a house from old bricks? This is what we will talk about in our article.

Materials for reuse

Such a solution, of course, significantly reduces the cost of building a house. True, you still cannot avoid the purchase of solutions and other consumables. If you want to build a house from old bricks, then try to buy all the materials in one place and make sure that the block sizes match.

old brick house

IN reuse fall:

  • Floor slabs in good condition;
  • Floorboards;
  • Beams made of wood or metal;
  • bricks;
  • Tiling, etc.

The main thing is that the old materials with which you are going to build a house are of normal quality, and also have the appropriate appearance. If the blocks are very crumbly or a lot of split, then it is better not to purchase them.

Most likely, the developer does not even think about what can be built beautiful houses from old bricks. If you offer him to buy used materials, then they will try to dissuade you from this venture. But builders with experience know very well that even the old brick from which the house stood for many years can last the same amount. Any building made of such materials will be strong enough and reliable. And building a house from an old red brick can be much cheaper than from a new one.

Where can I buy used materials?

If you decide to use used materials, then you need to competently and wisely approach their use in order for the building to be strong and durable. But where can you buy old brick to build a house? There are no specialized stores with such goods. It is best to search for materials by private ads on the Internet, magazines or newspapers. Such proposals often appear in the media.

Where to use brick fight

After all, any person with a bright mind cannot raise his hand, throw it away great amount a whole brick, or old floors from the house. Such materials will be able to serve the new owners for many more decades. The photo below shows an example of a building built from used bricks.

The use of non-new building materials for the construction of buildings:

  • The cost of purchasing blocks is significantly reduced;
  • Majority similar materials completely environmentally friendly, as before chemical solutions and the components were much smaller;
  • Boards, floors and everything else is time-tested for quality.

You can see an example of an old brick house in the photo. It is no different from its analogue, built from new and expensive materials.

Walkway from used materials

If you bought land plot, which already has an old building, then you don’t just need to destroy it, turning it into a mountain of garbage. You can always throw away unnecessary boards, blocks or beams. It is better to look at what old materials you can use in the construction of a new house or outbuilding. Thus, you can save a lot of money.

Outside the city there are always people who, for a small fee, will take down the walls of any building for you. If you do not want to use these materials during the construction of a new house, then you can make a good capital fence or barn out of them, as you can see in the photo.

If, during the dismantling of the building, it was possible to save a lot of intact and high-quality blocks, then feel free to use them in the construction of walls and interior partitions. Clay bricks, which were previously made in their characteristics, are much better than their modern counterpart (row), since it has a much higher moisture absorption rate. According to the main parameters, it can be easily compared with clinker, but the cost of such material is quite expensive.

The fight also should not be thrown into a landfill. It is perfect for filling the foundation.

You can save a lot on sand and gravel. In addition, you can still lay out the tracks in the yard of your site.

A house made of old bricks can turn out to be very original, and most importantly inexpensive. If you decide to build a building entirely from already used materials, then you need to consider certain features. It is advisable to first purchase floors, boards, blocks, and so on, and only then customize the project for this. Starting with a drawing is much more difficult, since the search will be able to, it is very busy a long period time. Just check ads regularly for availability. necessary materials. When buying, be sure to pay attention to the quality and condition of the blocks.

Pros and cons of a ceramic brick house

http://vseprokirpich.ru

Replacing bricks in masonry

The reasons for replacing a brick in a masonry can be different, such as damage or stains.

With this guide, you can easily replace a damaged brick.

We knock out a brick

1. Knock a brick out of the wall using a chisel and a small sledgehammer (Fig. 1), or a chisel. If you use a chisel and a sledgehammer, it will be easier for you to break the brick, if you drill holes in the brick and in the mortar around the brick, the more holes, the easier it will be to knock the brick into pieces (Fig. 2).

2. First we break the mortar around the brick, then we take out the brick, breaking it into small pieces.

3. Now we are looking for a replacement brick.

(Remove the mortar around the brick Fig. 1)

(If you make holes, then the brick will be easier to break Fig. 2)

We put a new solution

1. Remove the remnants of the old solution completely. Thoroughly wet the cavity with water.

2. We knead the solution and apply a 2-cm layer with a trowel to the bottom and sides of the cavity (Fig. 3).

3. We also apply a 2-cm layer of mortar on top of the brick (Fig. 4).

(We put the solution Fig. 3)

(Insert brick Fig.4)

Inserting a new brick

1. Swinging, insert the brick into the cavity in the masonry and move it until the brick is flush with the surface of the masonry.

2. If necessary, the brick can be knocked out with a trowel handle.

3. If the mortar does not come out around the brick, then the mortar is too thin; we take out the brick, add the mortar, and reinsert the brick.

4. We remove the protruding solution with a hacksaw.

5. After 30 minutes, you can do the stitching.

Brick instead of rubble

First we make vertical seams, and then horizontal seams.

6. Wet the tool for jointing in water and calmly draw it along the seam, leaving a concave mark.

7. Using a artisan, we remove the solution squeezed out by the jointing.

8. Using a wet piece of burlap or a rough cloth, we clean the bricks from the drained mortar.

Broken bricks should not be thrown into a landfill if you live outside the city and continue to build, repair or landscaping. Brick breakage can be used for a number of jobs and below we will tell you how and where this can be done. By using combat, you can save a lot of money, so don't miss the opportunity to keep your wallet tight.

The use of brick fighting

Broken brick can be used in the following works:

  1. concrete preparation,
  2. — Podsypka under the screed,
  3. - Improvement of paths
  4. — Filling gabions,
  5. - Road alignment
  6. Landscape arrangement territory.

We note right away that you can use the battle of red and white brick, while the white battle is more durable, it is not so afraid of moisture and does not crumble under its influence into construction dust.

Backfill and concrete

Fight is an excellent replacement for gravel in the production of concrete, the proportion of broken bricks in the mortar can be from 5% to ¼. Such concrete withstands the load well, does not crack and does not exfoliate under the influence of temperature and humidity changes.

Also, with a brick battle, expanded clay can be replaced when pouring under the screed. In this case, you do not have to order additional material and you can save. It is important when using a cullet for backfilling to reinforce the screed with a metal mesh, which is laid on top of the backfill, under the screed. Mesh cell size from 20/20 mm.

Paths and roads

With the help of the battle, you can level the road near your house. To do this, broken white or red brick is poured into road bumps and rammed. manual tamper. Such "patches" will keep the health of the car, and you will not have to remember "fools and roads" when leaving the cottage.

By fighting you can strengthen and decorate the tracks within the territory of country house. To do this, the path is first trimmed, 3-7 cm of battlefield is poured over the ground and it is rammed. If you have a broken brick of two colors, then you can mix it and sprinkle the path like this combined material- it's beautiful and practical, because walking in the autumn slush along a hard path without puddles is more pleasant than along a swampy path.

Broken brick perfectly passes moisture, and after tamping it becomes an almost monolithic solid layer.

gabions

Bricks can be used to fill gabions, that is, the structures different shapes which are made from metal mesh with cells of various sizes. On the suburban area gabions are used to create enclosing structures near pools, flower beds and even fences.

In gabion with fine mesh broken brick is poured until the structure is completely filled. Before backfilling, you can sift the battle, after which large pieces are sent to the gabion, a trifle is used in concrete work and for decorating paths.

landscape works

If there are a lot of irregularities on your suburban area, then they can be leveled with a brick battle. In this case, there will be no subsidence of the soil at the work site, the site will become flat, like an alpine lawn. It is important to add brick in such a way that there is room to put fertile soil on top - nothing will grow on burnt clay.

Site leveling accuracy is best controlled laser level, it will also help to break the site into separate landscape zones.

Do not write off to get rid of the brick battle if, by the will of fate, you have it. This material can find many applications in landscape, construction or repair work.