How to choose a bottler - a guide for the buyer. Bottle holder for the kitchen: a useful little thing

Have you ever wondered how far you walk through the kitchen from cabinet to cabinet during your daily cooking? But completely different places are reserved for sports, and in the kitchen everything should be at hand. Convenient to place necessary items the bottler allows.

The kitchen is that part of the house where the functionality of the interior is important. Organize optimally kitchen space help various systems storage: lockers, drawers, grids.

Often numerous jars and bottles are stored either in the refrigerator or in different cabinets throughout the kitchen. So you have to run around the room while cooking. In order to use time and kitchen space in the most rational way, a single section was developed - a bottle holder.

Is cargo something marine?

An interesting part of the kitchen set, which is a retractable basket with several levels, is called a retractable bottle holder or cargo. Construction made from metal rods, allows you to place bottles or cans in such a way that they do not tip over when the section is extended.

With the help of telescopic guides, it is held inside the kitchen module, and a facade is attached to its end side. Usually, bottle holder has two levels: it is convenient to place bottles in them different sizes. Occasionally there are three-level ones, but the dimensions of the kitchen bottles in this case make it difficult to fit only small items.

Therefore, this model is not widely used. As an addition, cargo can be equipped with a section for baking sheets or twigs, on which it is convenient to hang towels.

Pots are put not only in the nightstand

Cargo - drawers in which you can put different items and bottles

The bottle holder can be placed both in the upper and lower sections of the kitchen set. read our article.

At the same time, they are repelled by what kind of objects it is intended for. Often it is located next to the stove, sometimes even on both sides of the oven.

Then sunflower oil, vinegar, various spices and seasonings will always be at hand during cooking. Also the choice of cargo location largely depends on its size. It corresponds to the width of the box.

The cargo size range has models from 100 mm to 450 mm, the pitch is 50 mm. Such a variety of options is due to the fact that they are used not only for storing bottles, but also for various small-sized dishes.

Boxes with a size of 250 mm or more are designed to accommodate plates, cutlery and other kitchen utensils. Even frying pans and pots fit perfectly in them.. In such cargo usually there are several shelves.

The 150mm and 200mm bottle holder is used to store jars, boxes, powders and the like. With a side mounting method, this is the maximum allowable size.

Section width 100 mm is the most common. It is they who correspond to their name more than others, since they can only accommodate bottles or narrow jars.

Pull-pull: methods of attaching bottle holders

The size and depth of the bottle depends on the specific model. There are several options for attaching to the module: they are fixed in the inside of the box using retractable guides, but the principle of attachment is different.

To the inner side of the box;
To the bottom of the box.

Side mount

Consider how to mount in this way.

Important point! Before you buy a bottler, you need to determine the department in kitchen cabinet where you plan to place it.

Some models of kitchen sets initially have a corresponding compartment. Otherwise, any compartment can be adapted for it by simply installing an additional partition in it. Then guides are attached to the inner side wall.

Usually the appropriate fasteners are already included with the bottle. If they are not there, then small, maximum, 10mm self-tapping screws are suitable, designed for wooden structures. After that, the bottle itself is assembled from individual elements according to standard instruction that comes with the particular model.

Then, to the end part, the front panel is mounted, which acts as a door. Attaching a pen to it or not depends on your taste and overall design kitchen set.

bottom mount

This method is much more practical than the side one. But its cost, as a rule, turns out to be significantly higher. This is due to the fact that this type of construction includes a special trolley on rollers, on top of which the bottle holder itself is fixed. The installation method is noticeably different from that described above.

Cargo with this type of attachment does not require the use of a separate kitchen cabinet . On the contrary, it is placed in the space between two cabinets. Further, in accordance with the attached instructions, either the trolley itself or the guides are fixed.

It is not possible to give general instructions for this stage of installation. After fixing the bottle, attach to its front part facade panel, suitable for the rest of the interior of the kitchen. And at the end of the work, a handle is attached to the door.

When choosing this type of fastening, it must be borne in mind that the device will move along the floor. Therefore, if there are protrusions, depressions or height differences on the surface, they must be eliminated in order to ensure the normal functioning of the system.

Little useful additions

Bottle separators are installed at a distance between the side walls of the bottle holder

Regardless of the type of attachment, a good addition to retractable system are closers.

These devices allow you to close the cabinet in the most secure way for all the items in it.

Plus, you will be spared the extra noise of slamming doors. It doesn't matter how hard you push the box.

Before reaching 5-8 cm to the body, the movement will slow down, and in the final it will be very minimal.

To useful accessories for the bottle holder include bottle dividers. These metal half-rings are designed to prevent accidental contact of glass objects.

Thanks to them, a non-contact neighborhood will be ensured, ensuring the integrity of all bottles. It should be borne in mind that with extended functionality, the price of a bottle holder will increase slightly.

But what about beauty?

Bottle holders in the kitchen can perform not only a practical function. There is a limitless sea of options decorative options for storing and serving alcoholic beverages to the table.

The original bottles for serving wine are popular.. Even the most common varieties served in them will look attractive to guests. Such a device for storing wine should be placed away from a window, refrigerator or stove - wine must be protected from temperature extremes.

Decorative bottles are made from various materials. It can be glass, metal, plastic, wood. And how many invented various designs- and do not count! There are products designed to store a single bottle of exclusive wine. But the stand can be designed for a hundred bottles, while simultaneously combining the functions of a console table and a bottle holder.

If you have already estimated the dimensions and are ready to buy - the best way go to Ikea or another construction supermarket.

See what is ready for sale or ask the manager for a catalog with photos of bottle holders for the kitchen for the final order.

In conclusion, I would like to say: although retractable bottle holders built into the kitchen set appeared not so long ago, they have already gained wide popularity. Cargo bottle holder allows you to optimize placement kitchen utensils, saves space and fills voids in the headset.

This accessory will help you rationally organize the placement of utensils, facilitate access and storage of products in your kitchen. Do you want to see with your own eyes? Watch the video!

The functionality of the kitchen interior is very important for any housewife. Everything should be at hand in it so as not to travel a long distance while cooking. All items that are most often used should be very close. To do this, you need lockers, drawers and grids.

For this purpose, a single section for important bottles and jars was invented - a bottle holder.

Cargo for the kitchen

One of the elements of the kitchen set is the usual bottle or cargo. She is located in kitchen set, looks like an ordinary locker, opens by pulling out the shelves. On it, in a comfortable position, bottles and cans are placed. With the help of special limiters, they do not turn over and do not fall out of the shelf during its opening.

Functionality

bottler performs a specific function - it stores various bottles and jars. Basically, its place is near the stove. If the kitchen room is spacious, then there can be two of them in the kitchen set - on both sides of the stove. This is very convenient due to the fact that, standing at the stove, you do not need to go anywhere to add oil - everything is at hand.

The design of the bottle is very convenient. In it, in addition to numerous jars and bottles, you can store baking sheets, towels, detergents or cereals. There are many appointments for such a shelf.

If we consider home storage baskets, canned food and drinking water, then they should be retractable, and located near the worktops.

If the cargo is provided for detergents and cleaning products, then it must be installed next to the sink or washing machine. The depth and width of the niche are taken into account.

The bottle holder that keeps sunflower oil, spices, vinegar - should be located closer to the stove where food is being prepared.

The bottle holder, which fully corresponds to its name and functions as a bar, is logically placed next to the dining area.

Varieties

Finished products may vary:

by the number of levels;
according to the method of fastening;
by dimensions.

Usually, bottle holder has two levels. They can accommodate bottles of different heights. There are also three-level products, but it is not possible to place a tall bottle in it. Because of this, there will be a whole series of jars of spices and small bottles that have a non-vertical shape.

Cargo is fixed inside the box using special guides for this. According to the method of fastening, side and bottom are distinguished. Lateral fastening is considered more convenient, since it will be easier to adjust the facade in the future. Guide rails are located to the left and right of the roll-out basket.

The bottom is called the mount, in which the guides are fixed on the base of the box. It is used when there is not enough space in a narrow box for lateral fixation. Adjusting the gaps, in this case, is much more difficult. Sometimes the cargo can be installed with a bottom fixation directly to the floor. The main condition for such fastening is the presence of a perfectly flat and smooth floor.

When buying a retractable bottle Comes with mounting diagram and mounting hardware. If there are no elements, then self-tapping screws up to 10 mm long, which are intended for wood, will do.

Bottle holder for the kitchen: dimensions

Manufacturers of kitchen furniture offer retractable bottle holders, the width of which can be from 100 mm to 450 mm, in increments of 50 mm. Modern kitchen furniture not complete without such a capacious basket. In cargo custom sizes, you can store not only bottles and canned food, but also cauldrons, pots, pans and even some household appliances.

In a furniture set for a small kitchen, narrow side-mounted systems are installed. The most common size is considered to be 200 mm wide.

When planning a set of cabinets for a kitchen set, allocate a narrow space for a bottle holder. Such a place will never be empty, you will notice its advantage the first time you cook a meal.

Cargo installation

First, you need to measure the niche and buy the right size retractable model High Quality. Consider in more detail the installation of a two-row model.

Measurements are taken the distance between the guides, along the holes for their fastening. The location is determined by eye, depending on the height and depth of the box. The height of the bottle, which will be on the upper tier of the cargo, is taken into account.

For cargo to function normally, it is necessary to provide a gap between back wall box and fittings, the depth of the box is taken into account. It also needs to be done in front: it should be attached deep into the module, by 10-15 mm.

Inside, on the side wall of the box, marks are made for the guides. Then the guides are removed from the fittings and attached to the side wall. The markup must be done accurately and accurately, taking into account the exact data of its width and length. When the guides are fixed, the bottle itself is inserted into them.

And in conclusion - the facade is installed. To do this, you need 4 screws: 2 for the top, and 2 for the bottom. First you need to make a markup. To do this, you can attach the facade to the fittings, or you can take measurements using a tape measure.

It remains only to put a handle on the facade.

Do-it-yourself kitchen cargo

The manufacture of a separate, convenient module is considered, which, if necessary, can be moved to any convenient place.

Required for work self-tapping screws, plywood 1 cm, timber 15x25 mm and acrylic paint white, black and bronze. Take any paint that will be more suitable for the design of your kitchen. Of the tools you need a hacksaw, sandpaper, drill and drill bit.

Let's get to work:

A handmade bottle holder will be unique and convenient module in the interior.

Cargo design

As you can imagine, many useful gadgets can decorate the interior of the kitchen. The bottle holder is one of them. If she designed exclusively for wine, then it must be located away from sources of heat and cold. Temperature changes may damage the product.

To make such a device the following materials are used at home:

glass;
plastic;
wood;
metal.

The fixture can be made for one bottle or for several. An exclusive bottle with rare wine, which will be served at the table, will look very nice.

The device can be purchased at any furniture store and can be ordered. So the design will be as you like and fit into the model strictly in size.

Cargo can be not built into the kitchen set. It can be placed on any shelf in the closet.

You can arrange cargo inside the upper (hinged) or lower cabinets. It depends on the preferences of the customer, on his height, and on the purpose of this box.

If the kitchen set will be made for a large kitchen area, then you can provide for the installation of two bottles. They can be placed on both sides. hob. This will keep a lot of items within reach while cooking.

You can arrange one compartment at the top, in a wall cabinet, and the second at the bottom, near the stove. Such designs of additional sliding shelves very comfortable.

Perfect for a spacious room multilevel bottle holder, the height of which can reach human height. It can accommodate a bar, a stand for baking sheets and trays, a shelf for cereals and cans and much more.

If there are towels in the cargo, then it is worth installing a towel holder there.

If you don't want to hear the clinking of glassware when pulling out or turning the cargo, you should install bottle dividers inside. They will prevent the fall glass bottles on an empty shelf.

In order to have complete comfort when using cargo, you need to choose models equipped with closers and devices for soft, silent closing.

When choosing cargo, pay attention on the quality of the shiny coating on the metal. The ideal option there will be chrome plating, which is done by electroplating. The resulting coating will last a long time, there will be no scratches, chips, scuffs and rust on the surface.

What to choose?

Which product to choose for your kitchen - you only need to choose. Do not pay attention to cheap options, they can be of terrible quality. Yes, this is savings, but in such a case, the miser pays twice. When choosing cargo, you should adhere to I have some rules:

Expensive fittings is a guarantee of comfortable and long-term use of the product. Its installation will ensure not only flawless operation, but also good mood on every day.

A functional kitchen is the dream of any housewife. Yes, what is there, and the owner too. It is not enough to correctly plan the placement of cabinets and pick them up beautiful facades. The storage system is what is truly valuable in any headset. The bottle holder for the kitchen is one of the modern devices for arranging headsets. It can compactly place all kinds of gravy boats, jars, bottles, so that they are always at hand. The editors of the online magazine site have prepared material about such a kitchen "gadget" that will help you choose and assemble it yourself.

Bottle holders, no matter what anyone says, makes the interior luxurious

Retractable bottle holder - an indispensable and desirable attribute for everyone modern kitchen. Despite the fact that such specific drawers have been used for more than one couple of years, everyone “lusts” for them. Even the owners small kitchens and people with a minimum budget for its purchase. Is it so convenient and indispensable?

What is stored in the bottle: sunflower oil, vinegar, sauces. In wide models you can find anything - spices, cereals, dishes. Some even order two bottles to store in the second household chemicals.

Convenience:

all bottles in one place;
you can put a bunch of little things;
completeness of the headset, especially if the kitchen is of non-standard sizes: for example, it remains free space about 20 cm - not to put a box, and free seat you won't leave.

Of the minuses:

if there are small children in the house, then such a box will be empty for the first three years, or even more. It's so interesting to constantly put forward a small box. In this case, you can generally forget about storing vinegar in it;
when the bottle is less than half full, it falls when the box is opened, which is not very convenient;
with a small area of \u200b\u200bthe kitchen, even 15 cm to a regular box will be useful;
important to choose correct location, otherwise you can forget about the benefits of such a box;
considerable cost. The device of the bottle holder is not a cheap pleasure. If the budget is limited, then saving on fittings, countertops or facades is not advisable just to build in such a box;
inconvenient to clean. The standard and simplest bottle is a regular grate without a bottom. As the practice of the majority shows, if there is sunflower oil, which is constantly used, dripping to the bottom of the box along the metal grate is inevitable. Cleaning such a design is extremely inconvenient.

Of course, everyone is guided by their own arguments when ordering and operating such a device, which can have all sorts of modifications. It remains only to decide and choose required view filling the mini box for yourself.

Types of bottle holders for the kitchen

In fact, all bottlers are very similar to each other. If, not to take into account, of course, the author's work. Therefore, understanding them, as well as making a choice, is not difficult.

According to the installation method

According to the principle of the device:

embedded- we see these in every kitchen modern headset. They are made in the form of ordinary grills, or with other filling, for example, with coasters for spoons or with a panel for lids;
autonomous. The name itself speaks for itself. Such designs represent a modular type that can be delivered to an existing headset at any time, as well as capable of “existing” without it on its own in any corner of the kitchen. A striking example– modular kitchen systems from IKEA.

Both designs can be assembled and installed independently.

The design of the bottle was originally invented to store wine. The first models were bulky and could take up the entire basement. Later, more miniature versions "migrated" to the walls, cabinets and kitchen islands. In Russia, most often, bottles are used to store oils, sauces and spices. However, you can find anything in them.

They also order special filling for spoons, ladles, small pots, lids, cereals, dry spices, canned food, towels, baking sheets and other things necessary for every housewife. Someone manages to store even household chemicals in them. There is not standard models, similar to ordinary drawers - great option for those who have many different bottles. It all depends on the requirements and imagination of the customer.

"Stories"

The standard bottle holder, as many people imagine it, has two tiers. Optionally, you can find both in three and four with different heights individual models. For the "fans" of such cabinets, you can make whole columns more than a meter high.

Today the whole internet is shaking interesting design retractable bottle holder made of wood, located in narrow space behind the refrigerator. Saving useful place and use of unclaimed space behind appliances. The option is suitable for kitchens of any size, and you can also make it yourself.

Where are bottlers located?

Not only the convenience of using it depends on where the bottle is located, but also, in principle, the relevance of using it in the kitchen. Therefore, before buying, it is desirable to clearly determine where it will be located.

Upper and lower cabinets

Near hob or sinks in the lower drawers- these are the most common locations for bottlers. Of course, the nature of the filling also affects this.

For those who do not want to bend down each time for frequently used utensils or products, they place such a design in upper cabinets. The solution is non-standard and more suitable for tall owners.

Another location option is the middle zone between the upper and base cabinets. Yes, in the middle of the headset, such a cabinet will look awkward, but near the refrigerator or pencil case - quite succinctly. Of the minuses, it can be noted that such a cabinet "eats" work surface. But everything you need is always at hand.

Separate column cabinets for tall bottle holders for the kitchen

Columns, or sliding cabinets, canisters, are independent system storage. They can be made as a single structure, or have several drawers.

You can order a similar cabinet as a built-in headset unit. It is also possible to purchase it separately and install it yourself. At the same time, the choice of facades of similar ready cabinets big enough.

Most comfortable accommodation such a cabinet-column - next to the refrigerator. Pretty handy headset. In it, you can safely place all your jars, bottles, canned food, alcohol, and you never know what else you can put there. It all depends on the size. Usually, the height varies from 1200 to 1450 mm, while the width of the facade is 300 mm. The filling can be different - from three to six standard shelves for bottles, the presence of closers for smooth closing, additional elements storage of small items, conventional shelves, supplemented drawers.

The acquisition of such a full-size bottle is a really expensive pleasure. For example, a kitchen bottle holder with a height of 1200 mm, with a front width of 300 mm and four regular shelves brand "Titan Arena" will have a price of 30,000 rubles.

If desired, you can assemble a similar design yourself from the usual furniture material. It remains only to find a suitable content and carefully study the video master class presented below.

Features of bottles for the kitchen of different sizes

Another classification of cargo, and determining for many kitchen sets, is the size. Let's analyze the standard models of bottle holders, which are most often built into small but functional sets of Russian kitchens.

Bottle holders for the kitchen 200 mm with a closer

Cargo with a base width of 200 mm or more are designed for large kitchens. A decent width of the shelves allows you to store in such a cabinet not only a lot of bottles, but also various kitchen utensils and products.

In comparison with conventional cabinets, they save space, and at the same time, they are practically not inferior in terms of occupancy, especially if we consider cargo in three or more tiers.

Kitchen bottle holders for the kitchen 150 mm with a closer

Medium-sized bottles have a base width of 150 mm to 200 mm. The most practical designs with a side mounting method or as free-standing elements of the headset. The presence of a closer ensures smooth closing of the drawer. It is also worth bearing in mind that the presence of such accessories increases the cost of cargo.

Ordinary bottle holders for the kitchen 100 mm with a closer

100 mm - the optimal width of the bottle in a narrow or simply compact kitchen set. But even such a small area is enough to accommodate various bottles and small items kitchen utensils, such as baking sheets. Bunk cargoes of just this width are the most popular, as they are the embodiment of low cost and functionality.

If, during the operation of such a locker, it turns out to be “little”, due to the versatility of the design and fastening, you can order another one or buy a stand-alone structure.

Which bottle is better to buy for the kitchen

For a kitchen set, first of all, its functionality is important, and only after that - beauty and style. This also applies to the bottler. Her effective use directly depends on how well it is chosen. Consider the basic principles that you should rely on when selecting bottle designs.

By the size and number of shelves of the bottle in the kitchen

There are basic parameters for selecting cargo for a headset that need to be thought out in advance.

The size. To store a bottle of oil and small spices, a 100 mm bottle is enough. If you plan to place detergents and cleaning supplies there, then it is better to opt for a cargo of medium width - 150 mm.

Cereals and other products can easily fit in lockers with a width of 200 mm. In wider bottle holders, you can store entire services.

Number of shelves. Standard cargo has two shelves. The bottom one is for tall bottles, the top one is for small containers.

Three-tiered designs are convenient for those who constantly keep on hand many small containers with spices and sauces. There are also single-tier bottle holders, where on the top of the basket there is a place for towels and napkins, at the bottom - for tall containers.

Note! If the fittings are of high quality, then the height of the existing shelves can be adjusted independently.

According to the method of fastening

From wide model range kitchen bottles can be distinguished only two types of their fastening:

bottom. Relevant for wide baskets that can withstand a large filling weight. Allows placement in any part of the kitchen set.
lateral. This installation method is relevant for cargo with a width of not more than 2500 mm. Differs in more flexible adjustment of facades and reliable fixation of fittings.

As for the self-assembly and installation of bottles, there are no obstacles, either for one or for another type.

The nuances of making a bottle for a kitchen set

The assembly of the bottle holder with a side right mount has a simple and intuitive algorithm of actions.

Illustration	Action Description
	We unpack cargo. In addition to the kitchen “device” itself, it comes with fasteners (Euro screws) and guides that can already be attached to the base.
	We expose the base so that the guide is not extended, but is in the zero position. The top level of the basket must not protrude. A small recess inside the cabinet is allowed, but not more than 2 mm. We measure the scattering with a ruler from the edge of the pedestal to the first hole. You need to remove the guides to fix them on the cabinet. To do this, remove the fixing pin down until it clicks and carefully remove the guides.
	We make markings according to measurements for fasteners. Please note that the base must be located at a height of at least 30 mm from the bottom of the cabinet. According to the marking, we drill holes for euro screws.
	We fasten the base fasteners.
	We put forward the guides and “sit down” the grid in place. We check how correctly and smoothly it moves forward. If everything is fine, we fasten the second side of the cabinet, set the cabinet in place and mount the facade.

Important! To level the operation of the smooth running of the bottler, twist the flag, which is located with back side designs. You can use a screwdriver for this. Leave the flag in a position where the extension of the base will be smooth and without interference.

The video below will show you how to assemble the side mount bottle holder and how to properly adjust it.

If you need to remove the bottle holder in the kitchen set, then by following this algorithm of actions in the reverse order, you can easily cope with your mission. But how much she needs in the kitchen is up to each housewife to decide. Fashion is fashion, and everyone has their own criteria for comfort and convenience.

Organizers

This is what you can call additional devices in the kitchen that allow you to store things, use them with convenience. And that's exactly what the bottler belongs to. What can be stored in it?

A logical question for anyone who has never encountered this device. The bottle holder allows you to conveniently place:

the drinks;
vegetable liquid oils;
jars with spices, cereals.

In a word, everything that is packed in jars or bottles is the permanent inhabitants of the bottle. The second name of the bottle holder is cargo. Therefore, when you hear or see on the pages of the catalog under the photo, do not be surprised. In addition, if the site of Ikea or another seller does not have a search for the word bottle, it is quite possible to try to enter cargo.

Design

Cargo can be conditionally divided into two types. One is built-in. He's already coming with furniture set, placed in the bottom or top drawer, has basically two levels. Built-in cargo is held inside the module thanks to special guides. The cabinet is conveniently pulled out, the jars are placed behind a special holder that prevents them from tipping over. Usually, the built-in sections are the size of a standard bottle of wine - 0.75 or 1 liter. But they are almost always not limited in width, so a square bottle olive oil will also go in there with ease.

Stand-alone bottle holders are cabinets that can be bought separately and usually have the most neutral design and typical colors. This is done so that they fit into the overall set, do not stand out from the ensemble and harmoniously located in the kitchen with a ready-made set. In addition, by the way, there can be convenient crossbars for towels. It is most convenient to place such cargo near the stove. Just imagine, here you are cooking, now you come to the stove and, without leaving, you can get oil, spices, vinegar, salt, sugar. Will it shorten the cooking time? Definitely. Here is another plus.

Usually, the dimensions of the bottles are determined. Most of them are from 10 to 45 cm in size, in 5 cm increments. This difference is largely due to the fact that cargo is used not only for bottles, but also for other small dishes and kitchen utensils. For example, there are photos with examples of boxes in which even plates are located, they are usually 25 cm in size. They have several shelves. In such cargo, you can successfully hide pans, even shallow pots. Ikea also has such samples that can be seen on the pages of the photo catalog. For jars and boxes, cargo from 15 to 20 cm is suitable. The most common section width is 10 cm.

Mounting

Cargo can be attached in different ways. We have already decided that there are designs as part of headset cabinets, but there are separate ones. They can be attached to the inner side of the box or to the bottom of the cabinet.

Side mount

This fastening method implies cargo sizes up to 20 cm. In order not to overload load-bearing elements, design bigger size not used. I must say that before buying a separate cargo, it is recommended to first measure and decide on the cabinet inside which the element will be placed.

Most often, in most bottles, mounting hardware is already included in the kit. Therefore, it is worth paying attention to this moment first.

bottom mount

Undoubtedly, bottom mount will be more efficient and reliable. And all because the stability of the bottom of the cabinet is always higher than its doors. Such cargo can even be placed between lockers. Usually this is a trolley that conveniently leaves. Therefore, it is worth taking a closer look at this option if there is a place for such an element in the headset and in the kitchen. Recall that it is best to place cargo next to the stove or hob, unless, of course, the main elements there are spices and oils. In the case of wine and dessert drinks, the best place accommodation will be in the dining area. By the way, for this there are special cargo with an additional box for fruit, a small trolley that will conveniently place dessert items.

Cargo can be made of wood, MDF, metal, acrylic. It all depends on the style of the room in which this piece of furniture is chosen. Therefore, it is worth looking at the variety in large points of sale, like Ikea.

It's no secret that kitchen furniture, first of all, should be functional and practical. That is why when designing it, various fittings are used, which are integrated into drawers or stand alone, being part of the interior.

Special attention deserves such a device as a bottle holder for the kitchen. It is a structure made of metal rods, which is designed for the convenience of placing various utensils of the appropriate size in it.

Varieties and design

First of all, it is worth noting that there are several types of this hardware. They differ from each other in their size and ways of mounting inside the furniture. Moreover, each specific type can have its own separate purpose, not directly related to its name.

Dimensions

However, some manufacturers pay special attention to it, assuming that it will become not only auxiliary equipment for storing small utensils, but also the main storage for plates and other small utensils.

Large boxes are usually made 200 mm wide. At the same time, several shelves are located in the standard section. It is convenient to place plates, cups, cutlery and a host of other kitchen items on them.
Medium bottle holders are used for various boxes, jars, powders and other utensils. They have a lot of uses and optimal width in 150 mm. At the same time, it is precisely this size that can be considered the maximum when installing fittings using the side mounting method.
The third most common bottle width is 100mm. It is used in cases where it is necessary to save space in the volume of furniture. At the same time, its purpose justifies the name as well as possible, since only bottles, boxes of spices or small containers can be placed in this device.

Advice! When choosing certain sizes, it is necessary to be guided by considerations of practicality and the possibility of placement in the wall. This will save space and get functional furniture.

Side mount

This type of similar fittings uses a mount, which involves the placement of guides on the side panel inside the cabinet. In this case, it is best to use devices with a width of no more than 150 mm.

This allows you to place maximum amount necessary kitchen utensils and at the same time does not provide large space in order to overload the load-bearing elements.

First you need to choose where the bottle will be placed. In some furniture models, a separate compartment is allocated for this, but if the headset is made by hand, then you can use any box in which an additional partition is simply installed.
After that, guides are fixed on the inner wall using fasteners that are included with the device. If they are not there, then you can use small self-tapping screws designed for woodworking no more than 1 cm long.

Next, you need to install the bottle itself, as shown in the instructions for this model.
After that, you need to attach a pre-prepared facade panel, which will serve as a kind of door.
If desired, a small handle can be attached to the resulting door.

Advice! This design of the bottle is best used when saving space and installed in a finished box. However, don't overload it. various items which may affect functionality.

bottom mount

This device much more practical than the one that uses the side mount. However, its price can be much higher.

This is due to the fact that this design involves the presence of a special trolley with rollers, on which the bottle holder itself is placed.

The choice of mounting location also differs from the first model. This device does not need a separate one, but rather is designed to be installed between them.
Depending on the specific model, it is necessary to fix the rails or the trolley using the instructions or the photo attached to the manual. It is worth noting that there are many options for this action, and all of them are closely related to the chosen design. That is why it is impossible to pick up general instructions for this stage of installation.
When the bottle is fixed, a facade panel is attached to it, which matches the interior of the kitchen.
After that, a handle is mounted on the resulting door, with the help of which the opening will be carried out.

Advice! It is worth remembering that this type of device involves moving along the floor. That is why on its surface there should be no drops or protrusions that interfere with proper functioning.

Conclusion

After watching the proposed video, it becomes clear that such a device as a bottle holder is not just an innovation in modern design furniture, but also an essential item that helps organize the placement of kitchen utensils and saves space.

Also, the bottle holder will help fill in the voids in the headset caused by the elementary placement of standard cabinets.

Categories

Popular