How to wash the sink from limescale. How to choose a limescale remover to get rid of it forever. Jammed faucet: how to get out of the situation

August 14, 2016
Specialization: facade decoration, interior decoration, construction of dachas, garages. The experience of an amateur gardener and horticulturist. He also has experience repairing cars and motorcycles. Hobbies: playing the guitar and much more, for which there is not enough time :)

Plaque on the surface of the bath is an inevitable phenomenon that every housewife has to deal with. Getting rid of it is usually not difficult, however, to approach this process it is necessary competently, otherwise you risk getting rid of not only deposits of salts and minerals, but also plumbing. Therefore, in this article I will tell you how and with what to wash a bathtub and other surfaces from old plaque with improvised means so as not to spoil the plumbing.

Where does plaque come from

I note right away that it is almost impossible to prevent the appearance of plaque, since the main reason for its appearance is the evaporation of water, which interacts with soap. True, tap water even by itself leaves a plaque, as it contains a large number of mechanical particles and salts.

After the water dries, all these minerals and other elements are deposited on the surface in the form of a gray coating. If the water is rich in iron, then it can also stain the surface in a characteristic Orange color . As a result, a snow-white bathroom in a very short time turns into an unsightly container of "silver crimson" color.

Of course, after each use, you can wipe the tub with a dry cloth. In this case, you will not see a raid soon. However, it is impossible to keep track of all the drops that fall on the surface, so sooner or later you will still have to face the need to remove deposits.

There are currently many for sale household chemicals, which effectively cleans plaque of both types. However, most formulations are based on acids, as a result of which they are very toxic and can even cause burns if they come into contact with the skin. Powder products are more environmentally friendly, however, they scratch the surface of plumbing, as a result of which it gradually loses its original attractive appearance.

Therefore, all kinds of "folk" means are very relevant in our time.

Ways to remove limescale

First of all, let's look at how to clean the bath from lime-type plaque. To do this, you can use the following folk remedies:

Below I will tell you how to get rid of pollution in all these ways.

Method 1: table vinegar

The easiest way to clean the surface of plumbing is to use 6% table vinegar. You can use it like this:

pour undiluted vinegar into a spray bottle, for example, left over from some cleaning agent;
then spray vinegar on the soiled areas of the tub. For greater efficiency, you can “walk” on top with a brush, however, not very hard so as not to scratch the coating;
after that, the surface should be left for half an hour or even an hour. At the same time, make sure that the surface does not have time to dry. As a rule, the composition has to be applied every 15 minutes;
after the specified time, you need to clean the surface with a brush;
if necessary, the procedure should be repeated;
at the end of the work, the plumbing must be rinsed with water.

This method can be applied to tiles as well. The only thing before you wash the tile in the bathroom from plaque, wash it with soapy water to open access directly to the lime.

If plaque has accumulated in large quantities in the area near the drain hole, as often happens, plug the plug and pour a glass of vinegar heated to a temperature of about 40 degrees into the bath. The vinegar must be left overnight, after which the contamination will most likely disappear.

Method 2: citric acid

Citric acid is a good alternative to vinegar. Its main advantage is the absence of an unpleasant odor. Cleaning the surface with citric acid is carried out as follows:

dissolve a tablespoon of citric acid in a glass of water. The granules must dissolve completely, otherwise you may scratch the surface of the bath;
using a sprayer or sponge, apply the solution to the contaminated areas and wait 10-15 minutes;
after this time, dip the sponge into the solution again and rub the contaminated areas with it with your own hands. As a result, the surface will be cleaned before your eyes;
Finally, rinse the tub with water.

It must be said that lemon acid removes well and soap scum. Therefore, a sponge moistened with a solution can be “walked” throughout the bath.

Method 3: baking soda and washing powder

Another effective detergent can be made from the following components:

This tool is used as follows:

in hot water gradually add soda and powder;
now dip the sponge into the solution and use it on the contaminated area. The composition should be left on the surface for 10-15 minutes;
now the contamination should be wiped off with the same sponge.

Choosing how to wash the tiles in the bathroom from plaque, you can also dwell on this composition. He deals effectively with various types pollution on different surfaces and even mold.

Method 4: baking soda with vinegar

If you want to clean the surface of the bathtub from limescale quickly, efficiently and with minimal cost forces, then use soda with vinegar. Instructions for using these tools look like this:

first rub the surface with a solution of soda. To make it, dilute three tablespoons of soda in a glass of water;
then apply non-surface vinegar. The plaque removal process will begin with chemical reaction, which is accompanied by the formation of foam and hiss;
after half an hour, the treated surface must be washed with water;
if necessary, repeat the procedure again.

As a rule, after the first or second time, the surface of the plumbing becomes perfectly white.

Method 5: ammonia

Ammonia cleans surfaces well various pollution to "brilliance". Therefore, it is a favorite "grandmother's" remedy.

Working with it is quite simple - soak a rag in ammonia and put it on the contaminated area. After an hour, rinse the surface with cold water.

When working with ammonia ensure high-quality ventilation of the room, as it has a sharp unpleasant.

Hydrogen peroxide can be used as an alternative to ammonia. This composition destroys plaque as a result of the release of active oxygen during a chemical reaction.

Removal of yellow plaque

So, with cleaning the bath from lime deposits we figured it out. Finally, I will tell you how and what to wash yellow plaque. To do this, you can use the following tools:

Method 1: Borax and Lemon Juice

First of all, let's look at how to remove yellow plaque with borax with lemon juice, as this remedy has been tested for decades. It is applied as follows:

make pasta from lemon juice and Boers;
apply the paste on yellow patch with a brush;
let the paste dry;
now wash off the paste along with the rust under running water.

As a rule, rust goes away after the first application of the composition. However, if necessary, the procedure can be repeated.

Method 2: home remedy-paste

To make the paste, you will need the following ingredients:

After mixing all the ingredients, they should be applied to rust stain no more than 30 minutes. After this time, the paste must be washed off with running water.

Method 3: trisodium phosphate and hydrogen peroxide

Trisodium phosphate is an excellent degreaser. It can be purchased at almost any hardware store. And if you add a little hydrogen peroxide to it, then it does an excellent job with rust.

This composition is applied as follows:

dilute four tablespoons of trisodium phosphate in three lira of water;
then pour 50 g of hydrogen peroxide into the solution in small portions;
then moisten the sponge in the resulting composition and rub it with a rusty stain;
when the stain becomes barely noticeable, apply the product on it and leave for 10 minutes;
after the specified time, wash the treated area large quantity water;
repeat the procedure if necessary.

Method 4: oxalic acid

Quite simple yet effective tool is oxalic acid. It must be diluted with water in a ratio of 1:10 and applied to the contaminated area.

This tool is used as follows:

apply oxalic acid with a brush to the contaminated area;
then leave the composition for three hours;
then wipe the treated area with a sponge dipped in warm water.

Method 5: hydrogen peroxide with ammonia

Finally, consider how to clean the bath with hydrogen peroxide and ammonia. This is done as follows:

in a clean container, mix 150 mg of ammonia and 50 mg of hydrogen peroxide;
leave the solution for 10 minutes until the reaction is completed;
now you need to moisten the sponge in the solution and apply to the yellowed area;
After 20 minutes, the product must be washed off with running water.

I must say that this method is quite versatile, so it can also be used to remove limescale.

People are often interested in how to clean the mirror from plaque. For these purposes, tooth powder is excellent, which is rubbed with a rag. Glass can be cleaned in the same way.

Here, in fact, are all the ways to clean the bath from plaque, which I wanted to tell you about.

Conclusion

Using the above methods of cleaning the bath, you can remove any type of plaque, and at the same time do not damage the surface. In addition, they provide some savings, since the price of all formulations is much lower than the cost of special tools.

For more information, see the video in this article. If any points of the article caused you questions, ask them in the comments, and I will be happy to answer you.

August 14, 2016

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

To wash chrome coatings and accessories in the bathroom, not only folk remedies that saved our grandmothers are used, but also household chemicals. Before choosing a product, it is recommended to carefully study the label: make sure that the composition of the substance does not contain abrasive particles and alkalis that adversely affect chromium. We propose to consider in more detail the issue of cleaning taps, chrome-plated plumbing, aerators with the help of improvised means and industrial chemicals.

White water scale can be seen in almost any bathroom. It appears due to the increased content of calcium and magnesium in the water. Getting on taps and plumbing, it is deposited in the form of cloudy white scale. If you do not perform timely cleaning, plumbing can become clogged and become unusable.

If in the case of a shower head or a faucet aerator, the hostess can solve the problem herself, then when cleaning chrome surfaces, difficulties arise. Such coatings must be cleaned with care. It is recommended to observe the following rules when washing them:

Do not use metallized hard sponges for cleaning faucets and plumbing fixtures. The resulting scratches cannot be removed.
Choosing a chemical agent or folk method cleaning, do not use abrasives that damage the surface.
If the composition of household chemicals contains salt, sulfuric or phosphoric acid– Do not use this detergent. The consequences after it are as follows: the appearance of dark spots, as well as rust, which will be difficult to remove.
Do not mix several at once detergent compositions– there is a high risk of damage to the chrome plating by such combinations.
Ask the consultant in the store about special detergents for chrome. It is better to choose a substance, albeit more expensive, but designed specifically for a specific situation.

Damaged plumbing with the wrong choice of means will have to be replaced, which will result in large costs. At the end of the article, a composition recipe will be presented that will help restore chrome products with minor scratches.

Folk methods of cleaning from limescale

To reduce the time it takes to clean the faucets from limescale, it is recommended to wipe the products with a dry cloth after using them. Most housewives forget to perform this procedure, and return to the problem only when the scale has already firmly settled on the plumbing.

Among the home remedies that do an excellent job with plaque, we can distinguish the following:

baking soda;
laundry soap;
table vinegar;
lemon acid.

We suggest considering the cleaning recipe using each of these methods in more detail.

Take a few tablespoons of soda and dilute it with a small amount of water. Apply the resulting slurry to the surface of the tap, also process other chrome coatings. Leave the mixture for 1 hour, then carefully remove the remnants of the product with a soft cloth. If small stains are found, gently rub them reverse side dish sponges.

Apply soda gruel with a soft sponge, damp cloth or toothbrush. You should not use a steel wool, in addition, make sure that the resulting mixture does not have visible abrasives. To do this, after preparing it, leave the soda for 5 minutes so that it dissolves in water.

The hypoallergenicity and disinfecting properties of laundry soap have been known for a long time. It will also easily help to remove the resulting white coating on plumbing:

Soap solution helps to cope with many contaminants, including scale. Experienced housewives can confirm that it is really possible to clean all surfaces in the bathroom and kitchen with laundry soap.

For removing mineral deposits on the tap, you can use both a table 9% composition and Apple vinegar. The recipe is simple: mix vinegar with water in a 1:1 ratio. Take a rag and soak it with the resulting liquid. Apply the substance to the plumbing and wait a bit. Vinegar acts instantly, which is why it is a favorite cleaning tool for housewives in any situation.

Wipe down all faucets and showerheads in the bathroom and kitchen with a soft cloth. If stains from dried soap are noticeable in some places, wash them off with water.

Another way to get an effective result is lemon or citric acid. It is absolutely not worth using it in dry form: large abrasive particles can easily damage the surface of taps and showers.

To treat the faucet with acid, do the following:

Pour some of the product into a container.
Add a couple drops of water.
Without adding water, you can dip damp cloth in dry acid and wipe the surfaces with it.

In addition, a natural source of acid - lemon, copes with the task no worse. Take a whole lemon and cut it into 2 parts. If a large amount of area is to be processed, both halves will come in handy. Squeeze some juice into a container - you won't need it, it can be used for culinary purposes. Use half a lemon to wipe all chrome-plated items and leave for a while.

After treatment, wipe the faucets and plumbing with a clean, dry cloth and enjoy the result.

Home cleaning methods are good because they involve the use of improvised tools available to any housewife. If listed methods do not help, and the stubborn plaque does not go away, we suggest using household chemicals.

Anti-plaque chemicals

All chemical compounds pose some danger to human skin, so be sure to wear rubber gloves before use, and if necessary, a face mask. Some products cause allergies, before buying, read the label and manufacturer's recommendations.

Today, household chemical stores offer a range of products for chrome and steel products. They are divided into 2 types:

Purifiers - help to get rid of dirt.
Polishes - are used at the final stage of cleansing.

To wash taps faster, purchase both of them together.

Among the cleansing compositions, the following well-known effective agents can be distinguished:

Among the polishes, the popular Domax and Indesit products can be distinguished separately. The latest brand specializes in the production household appliances therefore, the compositions offered for polishing sanitary ware meet all standards.

These funds are used not only for chrome taps. They also excel in cleaning surfaces made of of stainless steel- sinks, stoves, furniture fittings and even dishes. Applying the compositions is easy: most of them have a dispenser nozzle, with which the substance is sprayed onto the product.

Following the advice indicated by the manufacturer, the agent is left for some time to penetrate into the pores of the material, after which it is wiped dry, removing residues. Polishes are applied after cleaning: they process products to a mirror shine.

Some detergent compositions create an invisible film on the surface of the product that protects plumbing from plaque. A glass cleaner can also produce a similar, though not lasting effect. Before surface treatment, check the label for the absence of alkalis and acids.

Jammed faucet: how to get out of the situation?

When the faucet or faucet for switching water to the shower is not used for a long time, it may jam. The cause of such a breakdown is often a plaque of water stone, which can be dealt with as follows:

Clean the faucet using one of the above products, or folk ways.
If this method does not work, we turn to another. Take vinegar and dilute it hot water. Dip the prepared rag into the solution so that it absorbs the product. Wind a rag around a jammed faucet, then wrap it around cling film. This is done so that the vinegar does not evaporate, but soaks the plaque well and removes it.
Another method that any housewife can handle is the use universal remedy WD-40. It can fix a lot of problems, and a stuck faucet is no exception. Spray the joint between the faucet and mixer with the product and wait a while. The substance can be purchased at any hardware or automotive store.

If the proposed methods did not help open the tap, you will have to call a plumber. In the future, in order to prevent similar situations, timely clean the gaps in the taps.

It also happens that the surface of the tap is cleaned, and the internal parts are clogged due to plaque. Most often, the mesh nozzle that sprays water, the aerator, suffers. It serves to enrich the water with oxygen and its uniform supply. Aerator - useful element crane that performs the following functions:

noise reduction due to the formation of small bubbles;
droplet spatter reduction;
significant water savings;
filtration small particles garbage.

When an aerator becomes clogged, all of its intended functions disappear. Often this part is covered with lime flakes, because of which the holes cease to cope with the task. Such blockages are characterized by the fact that when the tap is fully opened, the water flows slowly and is not sprayed. In this case, the element must be cleared:

Unscrew the faucet nozzle: to do this, wrap it soft material and use pliers to turn clockwise.
It is important that the aerator be made of steel, in the case of plastic part there is a high risk of breakage during removal.
A stuck nozzle can be loosened using the above method using WD-40.
Rinse the faucet opening with water.
Send the aerator to the vinegar solution for several hours.
The holes in the aerator must be additionally cleaned with a needle.
Screw the cleaned element back into the tap. It is better not to overtighten the mount, so that at any time you can remove it and clean it.

If you have difficulty unscrewing the aerator, contact the services of a plumber.

Cleaning plumbing fixtures

In addition to cleaning chrome faucets, other plumbing also requires cleaning: shower heads, darkened places for appliances, as well as buttons on the toilet bowl, cabinet fittings.

Improvised means are also used for cleansing, and if they do not cope, household chemicals come to the rescue.

Shower head cleaning

Clogged holes in the shower head are important to clean in a timely manner, when they are not completely covered with lime flakes. To do this, try to disassemble the shower head. Parts that were removed from the structure, soak for 2 hours in a heated vinegar solution. Then rinse them with water to remove the odor.

The whirlpool head itself must be cleaned with a needle. It is also recommended to use some chemicals and clean the nozzles with a toothbrush.

Unfortunately, it is often impossible to restore a damaged chrome plating. However, there is a tool to help hide errors during cleaning. For this, it is applied special compound for polishing metal parts car, among which is the Goi pasta. You can buy such substances at any car dealership, after consulting on this issue.

Another method of polishing chrome finishes is to use automotive wax shampoos. They create a water-repellent film on the coating and protect the material from corrosion.

Do not forget about the timely cleaning of chrome faucets, and then you do not have to think about finding suitable products.

The presence of various minerals and lime in tap water leads to the fact that on your plumbing in the kitchen and in the bathroom a rather corrosive and unpleasant limescale which spoils appearance your shell and, accordingly, your life. The harder the water in your area, the faster plaque builds up on your sink.

It is clear that it must be fought. How to quickly and efficiently wash plaque on the sink - read about this in this article.

Before washing the plaque on the sink in any of the ways, take care of the safety of your hands - be sure to wear rubber gloves. After all, really serious cleaning products threaten your skin with injury and burns.

Method number 1
Perhaps the easiest and most obvious way is to pay attention to the advertised results of an actively working global chemical industry and buy a cleaning agent in the store. After all, there are a lot of them now. Just have time to choose and carefully read the labels.

But keep in mind that regular use of cleaners chemicals may cause damage protective enamel. Enamel, unlike ceramics, does not tolerate exposure to acids.

If the usual standard set of tools designed specifically for these purposes does not help you, you can resort to the help of "folk" methods, how and with what to wash the plaque on the sink.

Method number 2
Plaque on the sink is well cleaned by acids, in particular vinegar. Wet a cloth with vinegar, put it in the sink and leave it for 5 minutes. Then apply detergent to the sponge, add a little vinegar and wipe the sink. A more thermonuclear means is acetic acid, but it must be handled carefully and in small doses.

Method number 3
Rust from the sink will easily go away if you treat it with vinegar essence. Phosphoric acid also works well against rust.

Method number 4
An unpleasant yellowish coating from the surface of plumbing will help remove ordinary laundry bleach. To do this, pour bleach into the sink, slightly diluted with water.

Method number 5
Ammonia does a good job with limescale. Add a little ammonia to the water, apply the solution to the surface of the sink and wash it off after 10 minutes with hot water.

Method number 6
The Internet, generous with advice, offers even the notorious American drink as a proven and reliable remedy. Moreover, it contains phosphoric acid. Many housewives, having tried Coca-Cola as a plumbing cleaner, say that there is a result.
Maybe you will try to wash the plaque on the sink like this original way? Look

Method number 7
If you do not want to seriously poison yourself with chemistry, try a completely harmless and natural folk remedy - mustard powder. After pre-soaking, they can not only wash the plaque on the sink, but also wash and disinfect dishes and other kitchen utensils.

The fastest and cheap way launder bathroom sink - use ordinary laundry soap:

Helpful Hints:

❧ How to restore shine to acrylic?
Plain vinegar will help get rid of lime stains on the surface of an acrylic sink. Abrasives for acrylic surface cannot be applied.
❧ How to remove stains from a stainless steel sink?
Soft detergents Great for removing stains from stainless steel.
Avoid using abrasive cleaners - they can leave scratches. But ethyl alcohol will help restore shine.
❧ How to remove stains from enamel?
Enamel stains are removed with a mixture of baking soda and hydrogen peroxide (a mild bleach). Rub the mixture into the stain, leave for a while, and then rinse with water. A mixture of borax with lemon works in a similar way. When cleaning enamel, do not use hard steel wool.

❧ How to make faucets shine?
The chrome parts of kitchen faucets and other appliances will shine again if you wipe them with a soft cloth dampened with baby oil. And crumpled foil will help get rid of rust.

❧ How to get shiny faucets effortlessly?
It is useful to keep a pack of tissues near the sink (or paper towels), or just toilet paper.
Takes five seconds to wipe down the faucet after use. It becomes so habitual that you don’t notice - you turned off the water, wiped it off, threw out the napkin / piece of paper. And that's all! It always shines!

❧ How to clean the drain?
To easily clean the drain - you can use the old toothbrush. And then plaque accumulates there, and it is difficult to pick it out with a rag, and apply a little money on the brush, and in a minute everything also shines there!

❧ How to clean the sink?
If the water does not drain well from the sink, pour it into drainer a cup of baking soda, and pour the same amount of vinegar on top - there will be a hiss. Pour water. Repeat if necessary. Clean the drain with a plunger.
❧ How to care for an aluminum sink?
Wipe an aluminum sink with diluted bleach and blot dry kitchen towel. To make the sink shine, use baby oil.

The appearance of limescale on the tap is due to the warming of the water. Salt stains may appear on the surface of the equipment gray color- this not only spoils the appearance of the crane, but can also adversely affect serviceability. Deposits can build up on the inside, hindering the operation of the device.

From time to time it is worth cleaning the elements from water stone. By choosing the right cleaning products, it is possible to remove limescale from the faucet in time and return the equipment to a pleasant appearance.

When choosing a cleaning agent, you need to pay attention to options that will help remove hard deposits and do not harm the coating of the equipment. The composition of such substances should not contain alkalis, abrasive elements that act aggressively on the material.

In almost every apartment you can see a white coating on plumbing equipment. The reason for its formation is a large amount of magnesium and calcium in the liquid. When it comes into contact with plumbing fixtures, taps, substances are deposited on the surface in the form of a cloudy white scale. Without high-quality regular cleaning, plumbing gradually becomes clogged and becomes unusable.

To get rid of an ugly plaque, cleaning activities should be carried out, observing some rules:

Do not use hard metallized sponges for cleaning - the resulting scratches cannot be removed.
When choosing a product, give preference to gentle options that do not contain abrasive additives. They will help clean the faucet without damaging the surface.
If there are acids in the product: hydrochloric, sulfuric, phosphoric, etc., it is better to refuse to use it. Surface treatment plumbing equipment similar substances may appear dark spots, as well as difficult to remove rust.
It is better to ask the store for a special product that helps remove plaque from the material your faucets are made of. This will help avoid mistakes.

We remove scale and rust from the tap - video:

If plumbing fixtures are damaged, they will need to be changed - this often turns into tangible costs. Therefore, it is better to carry out timely prevention using proven formulations. If you do not want to remove limescale from the faucet from time to time, after each use, it is recommended to wipe the faucet thoroughly with a dry cloth. Many people prefer to use homemade faucet cleaners.

The following tools help to clean surfaces from plaque:

table vinegar;
laundry soap;
lemon acid;
baking soda.

These are the most common home remedy options, each with various methods cleaning.

How to remove plaque from plumbing with baking soda

In a suitable cup, put soda in the amount of several tablespoons, then mix with water so that a semi-liquid gruel is obtained.
The composition must be applied to the mixer and all surfaces that need cleaning.
Hold the gruel of soda in these places for about an hour, then with a piece soft tissue wipe everything without force.
If stains remain, remove them with a dish sponge without wetting it with water.

To apply the soda mixture to a surface where there is a white or green coating, you can use a damp cloth, a soft sponge, as well as old toothbrushes with bristles that have lost their rigidity. The mixture should not have lumps - for this, after pouring water into the soda, stir the resulting composition several times so that the powder disperses properly.

How to clean a faucet with laundry soap

To wash plaque from plumbing, you can use the wonderful properties of laundry soap.

You should do it like this:

Grate a piece of laundry soap on a coarse grater.
Dilute the chips with hot water until a composition of medium density is obtained.
Add a little soda to the resulting mass, you can take calcined.
Using a piece of soft cloth, apply the resulting mixture to areas that need cleaning.
Wait about an hour, then wash off the soap with warm water.

prepared in this way soap solution a lot of useful properties. It helps to get rid of salt stains, clean the faucet from scale, cope with other types of pollution. Many housewives years of experience, to clean absolutely all kitchen surfaces use only soda and laundry soap, or combinations thereof.

Cleaning with citric acid

Lemon is able to provide a fairly effective result. Powdered acid is not recommended - if large particles that can provide an abrasive effect come across, they are likely to damage the surface of the faucet in the bathroom or in the kitchen.

To treat the surface, take a whole lemon and cut it in half.
The juice is not useful - you can immediately squeeze it into a bowl for use in cooking.
Wipe all chrome surfaces with half a lemon and leave for a while.
After about half an hour, wipe the treated areas with a dry rag.

The main convenience of home remedies is that they can be prepared from ingredients that are available in every kitchen. But in case of serious pollution, as well as when cleaning inside is required, it is better to use options with household chemicals.

Chemical cleaners

Sometimes home remedies are not enough to remove plaque. Then you should purchase a suitable cleaning mixture in a household chemical store. In order to erase salt stains or clean off rust, special cleaners and polishes are used. To get a quality result, it is better to purchase both.

Most detergent compositions are used not only to clean the faucet - they are suitable for working with a sink and stove, for caring for other stainless steel surfaces. For most, the packaging is equipped with a special dispenser device, so there are no problems when applying.

It is especially convenient to use them when processing hard-to-reach areas, for example, around a tap and handles, a drain hole.

We clean the tap from plaque using special tools - video:

Some of chemical compositions created by processing on surfaces thin film. It protects against the appearance of plaque, the surface retains an attractive appearance longer.

Hard water causes the formation of a dense layer of lime on the bathroom, plumbing. A compound of calcium and magnesium salts form a dense precipitate that cannot be removed with plain water or scouring powder. To return the cleanliness of the bathroom, the kitchen will help a special remedy for limescale professional purpose or handmade.

You can defeat lime if you choose the right method of struggle. Not every coating can withstand mechanical impact or alkali. In order not to spoil plumbing fixtures or finishes, choose safe but effective compounds.

When using cleaning products, protect the skin of your hands with tight rubber gloves, eyes - plastic glasses. Ensure that the room is well ventilated.

Tiles and ceramic products

If the tile is not wiped daily, it will soon lose its luster, become covered with limescale, and the seams will be in black mold. Creamy pastes are suitable for care. Powders have an abrasive structure that leaves microscopic scratches. Effectively clean the wall in the bathroom or pool, tiled shower, chlorine gel will help.

Vinegar will help to deeply clean the tiles - a simple and affordable folk way:

Pour the product into a spray bottle.
Spray all over the wall, carefully work out the tile joints.
Walk with a brush with a pile of medium hardness.
Wait a quarter of an hour so that the acidic substance can dissolve the deposits.
wash clean water, wipe dry with a soft cloth.

If there is no vinegar in the household arsenal, but a high concentration of essence, dilute it with water in a ratio of 1:12.

Ceramic sanitary ware (sink, toilet bowl, bidet) is prone to lime build-up. Vinegar solution will help to remove.

200 ml. acid pour into a suitable saucepan, heat. Pour into the toilet, leave to act for 12 hours. For effect, you can add food, soda ash. Wash off the solution in the morning.

To remove plaque in the place where water accumulates in the toilet, you must first flush the water, apply a special agent or composition from available products. Wait 1-2 hours. Remove the softened sediment with a wooden or plastic spatula. Drain the water.

To dissolve a layer of limescale, citric acid will help whiten the sink. A soft sponge is wetted with water, lemon crystalline powder is applied. Gently rub the dirt, rinse with clean water.

It is impossible to process tiles with concentrated alkalis, acids and solvents! There is a high probability of damage to the structure.

Acrylic and cast iron bathtubs

Acrylic products are popular among consumers. Shower cabin, bathtub made of material has a minimum weight, warm to the touch. It's nice to spend in them hygiene procedures, but after intensive use, the color loses its whiteness and turns yellow.

It is easy to take care of the acrylic coating, but it should be borne in mind that the aggressive composition leaves scratches, in which dirt, rust accumulate over time, and microbes develop. Does not tolerate high temperatures.

The following method will help remove heavy limescale from plastic:

pour cool water to the very brim;
pour out a package of citric acid or half a liter of 7% vinegar;
leave to act for 12 hours;
after the specified time, drain the water and rinse the surface with clean water;
wipe with a dry cloth.

Enameled bath after restoration is equal to acrylic and requires careful handling.

Acrylic and plastic are allowed to be wiped with hydrogen peroxide, ammonia. Important condition– do not leave substances longer than 5 minutes! Wash off with cool water.

Removing deposits on a cast iron bath is not difficult. Suitable for cleaning with dishwashing detergent or washing powder diluted to a thick slurry. Spread a small amount over the surface, paying attention to hard-to-reach places, rinse.

Serious pollution will help to remove special means with anti-corrosion inhibitors.

Glass and plastic

glass and plastic surfaces located in the bathroom or inside the shower cabin are covered with a white coating. If you pour water into an aquarium without pre-cleaning, it will look faded. Soap and water will help to clean the mirror, shelving, partitions, glass on the doors, the mixer.

Dilute a small amount of soap to make a foaming solution. Dampen the sponge and wipe the surfaces. Rinse well in clean water, wipe dry.

If limestone has formed into a dense hard layer, vinegar or citric acid will corrode it. Plastic will not suffer - the concentration of the substance is minimal.

Plumbing

Vinegar will help clean the faucet. Effective solvent plaque and rust. It is enough to apply the acid on a sponge and thoroughly work through the contaminated parts, then rinse and wipe with a rag. It is advisable to rub hard-to-reach places, a joint where sewerage or a stainless steel pipe that acts as a heated towel rail with a toothbrush.

Remove limescale thick a mixture of vinegar and soda will help. Apply the finished slurry to a rag or sponge, apply a compress to the place of contamination and leave for 1.5 hours.

Place removable parts in warm water with the addition of citric, acetic or oxalic acid.

Overview of Home Remedies

Regular home care helps prevent the buildup of plaque, but if trouble occurs, use the following products and formulations:

Oxalic acid. Handles quickly challenging tasks- dissolves water stone in the toilet. The instruction warns of the pronounced causticity of the substance, you can work with it in tight gloves, a respirator and goggles.
White. The liquid product is an alternative to chlorine. Apply to toilet bowl. It works for several hours, after which the bottom and walls shine.
Lemon acid. A gentle way to difficult spots. Removes plaque different density, cleans cement joint between the tiles from blackness. It will also help to refresh the teapot with a coating on the spirals and walls.
Vinegar. Table acid dissolves impurities and kills dangerous pests. If a washing machine covered with lime, poured into the compartment instead of powder, included in the usual washing program.

Removing limescale with home remedies is safe for coatings and family health.

Overview of professional cleaners

When buying a cleaner, carefully study the composition and characteristics. The label clearly indicates the list of surfaces that can be processed.

Effective Products:

comet;
Gel Sanitary;
Pemolux;
Sillit Bang;
WC5+;
Sanfor;
Toilet duck Active;
Santry;
Dosya;
Bref;
Titanium.

All of them are divided into 4 categories:

Powdered. Effective against limescale and urinary stone.
Chlorinated. Clean up unpleasant odors, pollution. Cleaning is carried out with good ventilation - Sillit Bang, Comet, Titanium.
Alkaline. To dissolve any difficult stains - Dosya, Bref.
Acid. They are used as a last resort due to aggressive effects (Suntri Gel, Active Toilet Duck). Ceramics and faience deteriorate from their application.

How to avoid lime formation

Limescale is better to prevent than to remove. To prevent layering, follow these steps:

1-2 times a week, clean with special products;
after using the toilet, clean the residue with a brush and pour water;
repair plumbing in time to avoid smudges;
use special nozzles and anti-plaque tablets in the toilet;
wipe surfaces with damp cloths with citric acid.

Regular maintenance of tiles and plumbing fixtures will keep their aesthetic appearance for a long time. Remove any stain immediately before it has ingrained into the structure. Slowdown backfires, makes you seek effective methods dealing with difficult contaminants. It is better to prevent the problem than to look for a method to deal with it later. Cleanliness is a guarantee of health in the family and comfort in the house.

Categories

Popular