DIY flowerbed ideas from improvised. Flowerbeds from improvised materials and tools with their own hands. Flower beds from old tires

With the onset of spring, not only nature awakens, but also among summer residents, owners of country and own houses there is an irresistible desire to decorate their possessions, to create an atmosphere of beauty and comfort in them. After a noisy dusty city with a gassed atmosphere, it’s good to be on a forest island, breathe in a sweet floral scent, lie on a green soft carpet from, plunge into the transparent blue of the pool, meet the dawn in a gazebo entwined with outlandish plants and flowers. This is how the everyday work of millions of owners of pieces of nature begins. You can, of course, order from a landscape designer to magically transform your site. However, this service is very expensive and not everyone can afford it, and making flower beds in the country with their own hands is much more pleasant.

Flowerbeds in the country with their own hands

The most spectacular, conspicuous, eye-catching are flowers. Any form of flower beds look beautiful, but if there is little space left for these ornamental plants then turn on the fantasy and come up with custom solution this question can be easily and simply, the main thing would be desire.

The flower bed should be in a place where there will be enough lighting for it, unless of course they grow in it. shade-loving plants. Therefore, you should not break a flower bed or flower garden in shady places, and even better, place them near the recreation area, at the main entrance or where free access will be provided to them. The paths leading to flower beds and flower beds can be laid out beautifully, or simply covered with red tennisite.

Flowerbed decoration

Built-in flower beds in the country with their own hands. They don’t need a dedicated space, and anyone will do. Flowers will brighten up the dullness of gray, ennoble, emphasize the airiness of the glass. This option will help to divide into, eliminate the need to take flowerpots and pots out of the room every spring.

Can be arranged in the form of rising terraces, carefully considering the location in them planting material. The flowerbeds built into the benches are practical, look spectacular, and deliver aesthetic pleasure.



Flowerbeds from car tires (tires)

The creative fantasies of gardeners, in the matter of designing flower beds and flower beds, should not be limited to anything. Any items available on the farm can go into business. It can be anything: old car tires, buckets, pots.

In a word, everything where you can pour the earth. To give these items even more beauty and elegance, they can be painted in bright colors.

Colored flower beds car tires
a great attempt to add bright colors to gray everyday life



DIY vertical flower beds

For example, hollow bricks must be glued together in the form of a cabinet, from which all the drawers are pulled out. Fill the cavity with soil and sow the seeds of your favorite flowers. When forming flower beds, you need to remember about drainage holes so that the water does not stagnate and the plants do not die.

Vertical flower bed for petunias- a brilliant solution not only as an original decoration for your garden. It will also save you a lot of usable space, which there is always something to use.

Make vertical flower beds at the dacha with their own hands from improvised materials is amusing and exciting, they look special, beautiful and spectacular. Each site becomes unique in its own way, acquires its own individual charm and charm.

As you can see, absolutely everything can be useful in the household - this photo a clear confirmation of this



DIY umbrella flowerbed

For this, an old factory umbrella or a do-it-yourself plywood umbrella is suitable. With a sharp part, they stick it into the ground by 10 cm, strengthen it with wooden pegs for stability, line the bottom with small pebbles, then fall asleep fertile soil.

The handle of the umbrella can be painted in different colors, in harmony with the plants blooming here. Bright marigolds, multi-colored asters, drought-resistant salvia will look beautiful.

Ordinary design of the garden, for a long time does not bring proper joy to the eyes. Each hostess strives to decorate her garden, make it special and unique, but not everyone succeeds, often the result does not live up to expectations. How to choose and arrange flowers in the garden is a sore point for many gardeners.

First of all, you need to choose a color scheme that does not hurt your eyes and merges into a colorful palette. The most common colors are red, blue and yellow. Basically they are called shades of purity, as they are obtained without mixing the basic colors of nature.



Of particular relevance are such colors as purple, light green, orange, they are obtained just the same as a result of mixing the primary colors. Turquoise, blue, blue are cold shades.

Black and white, polar shades are combined with any color. Thus, with a wide range colors you can create a unique palette in the garden.

Before decorating a garden, you need to initially decide on the main color and the transition of tones. Having chosen the base color, you should not plant the same type of colors next to each other, in which case the garden will not look bright and dull.

It is better to occupy the main area with bright colors, thereby emphasizing the main spectrum of the palette. If the foreground looks bright enough, then the background should be made more neutral, green shades, calm and harmonious, are suitable for this. The more greenery in the landscape, the higher the degree of its harmony.



Having picked up the colors, having decided on the plants, it is necessary to correctly arrange the flower beds in the country with your own hands. Here it is worth using your imagination, not forgetting about the observance of the color scheme. It is also worth remembering that the flower bed should be good, if, of course, these are not shady plants, it is better to place flower beds with such plants under the trees.

It is not a bad idea to place a flower bed near the entrance to the site or next to another building, thereby ennobling the buildings. For the exact location of the flower beds, it is worth drawing a sketch of your garden, so you can predict the final result.



The biggest mistake in the design of the garden is busting, both in colors and in the arrangement of flowers. Don't take everything free place flowering plants.

The original will look small artificial stream, garden figures, it will bring some zest to your garden. Unusually look made in the form of an artist's palette, from bottles, from old shoes and even from an old toilet bowl. It is important that you like it and fit organically into.

There are a lot of options, colors and arrangement of flower beds in the garden, here, as they say, who, what much. But still it is worth being guided by the basic principles.

Decorate your garden correctly, keep the balance of natural colors, because there are a lot of ideas for creating flower beds.

Do you want to decorate the site with original garden beds, but do not know where to get ideas from? Here you will find best examples flower arrangements that will transform your garden in a matter of moments! We will tell you how to make a beautiful flower bed with your own hands, give examples and several master classes with photos.

A flower bed made by hand is one of better ways decorate the site, add originality and expressiveness to it. A beautiful flower bed will become the most attractive corner of your yard and, perhaps, even a kind of link that unites the house, garden, plants and outbuildings into a single harmonious composition. You can use absolutely any materials, even the most unusual ones, to make flower beds.

Regardless of the attractiveness of the flowers, a flower bed that does not have a fence will look unfinished. The fenced flower bed will immediately change, become more accurate. Such fences, by the way, are necessary not only to mark the boundaries, but also for many other purposes - for example, they prevent the spread of plants (especially ground cover plants) around the site. In addition, the sides protect fragile shoots from pets walking around the site.

Definitely on sale today. ready-made forms and fences for flower beds made of wood, stone, plastic and even metal, however, after construction / repair work, there are always surpluses of building materials, pipe trimmings, wood, pieces of bricks - in a word, everything that, if desired, can be used to make lovely flower beds . For example, the remnants of linoleum or metal tiles can serve as fences.

Polyethylene packaging is a real problem for a responsible summer resident. The solution could be to use plastic bottles to create flower beds. This solution is recommended for areas where there are a lot of moles - the bottles from which the flower fence is made will become a serious obstacle for pests. You can even alternate bottles different colors to make the composition look more colorful.

Note! Before digging in, it is advisable to fill the bottles with sand or soil - so they will not deform and become more stable.

New life for old things - we use improvised means!

People often transport unnecessary things to the country. Various chests, boxes, chairs, shoes and clothes - all this survives here last days to finally dry out or burn in a fire. But from old things you can also make beautiful and original flower beds!

Some flowers spend the winter in the apartment, and they are transported to the site only in the summer. But they do not have to be planted in the ground - you can leave them directly in the box, and then, when autumn comes, move them back to the house.

More boxes can be used to create vertical flower beds. Conditions like these are ideal for hanging crops and succulents. You can hang these designs on a wall, fence or other vertical surface.

If you have drawers from old chests of drawers or nightstands lying around, do not rush to send them to the landfill - instead use them to organize a compact flower bed. The color and shape of the boxes can be different, as well as the general style. But all of them will be harmoniously united by colors.

Sometimes even such seemingly useless things as old shoes, can acquire new life. You can plant flowers there, and then hang your shoes somewhere (even by the laces). At the same time, the older the shoes, the better - there will certainly be no stagnation of water in leaky shoes.

Another way to create original flower bed is to use the old iron cage. Plant climbing crops in it and hang it on a tree or inside a gazebo.

Very unusual flower beds are also made of glass wine bottles. This is guaranteed to wow your guests! But be careful when separating the bottom, otherwise you can cut yourself.

A small but very functional flower bed can be made from a piece of burlap. Make a bag out of the material, hang it, for example, on some kind of pole. Tellingly, it is suitable for both flowering crops and fragrant herbs (you can add the latter to tea directly from the "bed").

To create a flower bed, those things that just lie on the street can also be used. A striking example of this is a dilapidated log. Take it, cut a longitudinal recess and plant flowers there (this option will be described in more detail below).

A stump that could not be disposed of can also turn into a flower bed. Tie pots to it with wire, plant spectacular falling flowers there.

But another option is a milky river, as if pouring out of a can. But in this case it is very important that the green background is solid.

Is your old bike no longer a means of transportation? But you can turn it into a highlight of your garden! Paint it, and instead of the trunk, install such a container with flowers.

The next example is already a complete composition. Combine with colors old garden tools, experiment.

A massive stone vase will also look good in the form of a flower bed. Alternatively, you can use for this purpose big pot from clay (this can stand in the open for several seasons).

Today mailboxes almost never used, but don't throw yours away! Make it like this compact flower bed and hang it on the gate.

Video - Making flower beds from old things

Master Class. DIY vertical flower bed

Vertical flower beds acquire in last years increasing popularity. Consider a small step-by-step instruction for making such a flower bed using multi-colored flowers. The best option for composition is, of course, .

For work, you will need the following consumables:

After preparing everything you need, get to work. For the convenience of visitors, the information is presented in the form of a table.

Table No1. Instructions for creating a vertical flower bed for the garden.

Steps, photoDescription of actions



Take the wire mesh and make a cylinder out of it, which will serve as a vertical base. Use plastic ties to fasten the edges of the mesh. Place the resulting cylinder into the flower pot.



Take strong cellophane and wrap it around the wire mesh.



Using the same plastic ties, attach the edges of the film to the vertical base.



Fill the resulting form with a pre-prepared soil mixture for flowering crops.



Also fill the flower pot with soil (this will make the wire mesh more stable).



Cut holes in the film for planting flowers. Be sure to do this in a checkerboard pattern.



Plant flowers in the holes, then carefully water.



Also plant a few plants on top (also water them afterwards) to make the composition look complete.



Water the finished vertical flower bed regularly, fertilize in a timely manner. In this case, it will look the same as in the photo (or even better!).

Master Class. Flowerbed "Palette" do it yourself

We are all artists at heart, and therefore to create something beautiful (including the usual garden bed) must be creative.

To make such a flower bed yourself, first decide on the flowers that will decorate it.

In addition, you will need pots in which the seedlings will be transplanted and where they will bloom throughout the summer.

Also prepare a rake and a shovel - they will also be required.

As a base, you can use a sheet of plywood, polystyrene (not recommended, because. material is light, it can be blown away by the wind) or furniture board.

To fix the base, prepare the clamps in advance.

You will also need paint or stain, varnish.

So, for starters, take the base and draw a palette on it with a marker.

After that, cut out the shape with a jigsaw.

This is what the finished base should look like.

After that, make fasteners. The example drawing below shows what they should look like.

For the manufacture of flower bed mounts, use the bars.

Using clamps, attach the fasteners to the base of the future flower bed.

Using pipe scraps, you can make stands for rakes and shovels.

Then decorate gardening Tools- for example, paint them in polka dots or paint them in one color.

Then take the base of the flower bed and, if a furniture board or plywood was used in the manufacture, cover it with stain, and then with varnish.

Wait for the coating to dry and install the flower pots. That's it, the beautiful flowerbed "Palette" with your own hands is ready!

Video - Making a flower bed from a wheel

Master Class. Flowerbed "Turtle" from car tires with their own hands

We offer another interesting option for creating a beautiful garden flower bed. Step-by-step instruction below.

Table number 2. Instructions for making flower beds "Turtle".

Steps, photoDescription of actions



The finished flowerbed of tires will look something like this.



To get started, prepare:
- tires with spikes (2 pcs.), always one without steel cord;
- screwdriver;
- paint for external works, brush;
- self-tapping screws 3.5x55 mm (15 pcs.);
- big knife.



In a tire that does not have a steel cord, cut out the bead on both sides and cut it into four identical fragments.



As a result, you should get such elements from which paws will be made.



Cut out a pair of rectangular sections on each of the blanks.



As a result, the workpiece should look like this.



The second tire, from which the torso will be made, may be slightly larger. Mark it into six identical parts, make cuts at the border of the sidewall and tread - one narrow (for the tail), one round (for the head) and four wide (for the paws).



Insert the pre-made paws into the appropriate slots, fix each with two self-tapping screws.



Here's another photo from a different angle.



Connect the edges of each paw as shown in the image: on the one hand - with a self-tapping screw, and on the other - with a wire staple (similar to a stapler). As a result, near the body, the paw will be narrow, and on the other hand - voluminous.



Take a piece of tire, make a tail out of it and attach it with the same self-tapping screws.



You can use a spray bottle to make the head.



The hole for the head you made earlier should be such that the head itself is at a 45 degree angle. Fasten the bottle with a self-tapping screw (it must go through, as in the image).



AT assembled the flower bed should look like this.



Paint the flower bed (you can use two colors, as in the example). Protector elements can be used to emphasize the texture of the turtle. If the tires are "bald", come up with your own pattern.



Color the head too. The turtle, as you can see, smiles contentedly. Everything, the flower bed is ready (just wait until the paint dries)!

Flower beds from annuals - schemes

Flowers for flower beds are selected according to color, varieties and many other factors. And to make flower beds from annuals, the schemes of which you will find in, on your own, you do not need to have the skills landscape designer. The main thing is to calculate everything correctly even before the start of work and familiarize yourself with the basic rules for creating flower beds.

Master Class. DIY log flowerbed

To make such a composition, you will need the following consumables:

  • log (diameter - 40-50 cm, length - about 200 cm);
  • flower seedlings;
  • gravel;
  • primer;
  • film.

In addition, the work will need:

  • simple scissors;
  • chainsaw (can be electric);
  • wooden hammer;
  • bit.

So, everything is ready, you can proceed directly to work.

Table number 3. Instructions for creating a flower bed from an old log.

Steps, photoDescription of actions



First, peel one side of the log from the bark (this is where the chisel will come in handy).


Make cross cuts on one side of the log in increments of 50 cm and a depth of about ¼ of its diameter.


Cut off part of the log from the side where the cuts were made so that the result is a longitudinal surface.



Make cuts on this surface as shown in the image.



Using a chisel, remove the sawn pieces of wood and make a kind of "trough".



Cut the film with scissors in the shape of the resulting “trough”, and then lay it down.



Pour gravel over the film, and on top - thin layer fertile soil.



Plant seedlings of flowers and enjoy the resulting beauty!

Master Class. DIY floating flower bed

A floating flower bed is a kind of plant island moving around a pond. It looks amazing, and making such a flower bed at home is quite simple. In fact, it is plastic or wooden base with sealing mesh laid on top and soil for planting flowers. Instead of soil, you can even use pebbles or hydrogel, but it is important that there are already aquatic inhabitants and other plants in the reservoir (they indicate the presence of nutrients).

What plants are suitable for this? In principle, any, but be sure to take into account the swimming ability of the structure, because too big plants can easily flood the island. Also note that it is better to give preference to crops that love moisture (sedge, lilies, papyrus, colorful potted flowers or ornamental grass).

A floating flower bed is sold today in many specialized stores, but if you wish, you can make it yourself.

First, decide what material you will use in the manufacture of the island. Determine the dimensions yourself, as well as the depth of immersion (preferably somewhere around 7 cm from the bottom). Please note that the soil should not be eroded by water. Use gravel to adjust the diving depth.

  1. A ready-made pallet (or, alternatively, a mesh pot) can be bought at the store.
  2. Also, the container can be made from boards (it will turn out small box with holes), impregnated to protect against moisture. Such a box must be covered with spunbond or geotextile, and then fall asleep drainage layer and soil.
  3. The third option is to use plastic bottles. They must be cut, holes made at the base, and then covered with the same geotextile.

It is quite obvious that a container filled with soil will not float by itself - for this it is necessary:

  • cut out of the packaging foam (this remains after purchase household appliances) rectangular frames that will hold the island on the surface (they are attached to the top of the flower bed, and not to the base);
  • foam the perimeter of the flower bed and its upper part with mounting foam;
  • make a pontoon out of plastic bottles along the edges of the island;
  • use an inflated car camera.

What about floating flower pots?

They can also be launched into the water, but the reservoir must be small and always without aquatic inhabitants. For example, you can cut out a base for flower pots from foam, as in the image below, which is necessary for stability on water. However, such floating pots will have to be watered regularly.

How to decorate a floating structure?

  1. You can mask the unattractive edges of the island with earth, moss or branches.
  2. You can also install LEDs on such a flower bed, the operation of which is controlled using a remote control.
  3. Finally, you can put figurines of animals or birds (for example, a ceramic stork) there.

Note! Before starting a floating flower bed, you need it in without fail test! If it is unstable, then it should be improved. Also keep in mind that flowers will grow, which will change the balance of the island.

Master Class. DIY flowerbed of old chairs

To make such an original flower bed, prepare:

  • old chairs;
  • paint in cans;
  • sandpaper.

All other materials depend solely on your imagination. You can, for example, use wooden box instead of a pot. In any case, first remove old paint off the chairs and sand them carefully with sandpaper.

Clean the chairs from dirt and dust, then paint. It is quite obvious that it is better to do this on the street, because there is no doubt about the toxicity of the paint.

You can also paint the flower pot if needed.

When the paint is dry, you can paint the chairs. We recommend using this acrylic paints included in the paint-by-numbers kit. These are not washed off, and varnishing is not required.

When the painting is dry, install flower pots, fill them with potting mix, plant flowers and have fun!

Thanks to such original flower beds, it is quite possible to compose whole compositions.

This one, for example, is made from old shoes and children's sneakers that no one has worn for a long time.

And in conclusion - a few more photos of original and beautiful flower beds.

A small flower bed in the form of a bag on a hanger

As you can see, you can make a beautiful flower bed with your own hands, and there are really many options. We hope that the master classes offered here will help you with this!

Video - DIY stone flower beds

DIY flowerbeds from improvised meansgood way improve the site, making them an expressive and amazing element landscape design. Such flower bed will become not just a picturesque and attractive corner of the dacha, but can also become a link that unites the house and garden, buildings and plantings into a harmonious and unified picture. Beautiful flower beds, decorated with their own hands unusual materials, will help to achieve an incredible effect.

Making flower beds with your own hands: destroying standards

No matter how lovely and luxurious the flowers are, a flower bed without a fence will have a somewhat unfinished look. With fence flower bed significantly transformed, it becomes neater and more presentable. In addition to marking the border, the side (fence) also performs other functions: for example, it does not allow plants, especially ground cover plants, to actively spread (spread) over the site. The side also performs a protective function, saving the fragile shoots of plants from the encroachments of walking pets.

Of course, you can buy ready-made plastic, stone, wooden, metal (forged) fences or shapes (various vases and bowls with and without legs, barrels, etc.) for flower beds, but after construction (repair) there are many various items, scraps of wood, metal or pipes, pieces of brick, from which you can make lovely flower beds, with your own hands and without special costs. Just as a fence, you can use trimmings of metal tiles or slate, the remains of linoleum will do the same.

pet container for responsible residents in the conditions of a summer residence, it can become a real problem - there are very few places for its separate delivery, and it is quite inconvenient to carry it specially to the city. The solution can be to create a flower bed with your own hands from plastic bottles, which will become a good fence for the flower bed. This option is recommended for areas with an abundance of moles - plastic will be a sufficient barrier for them. To make the flower bed look colorful, it is good to alternate bottles of different colors.

Foreword

The fence gives the flower bed a finished look and greatly facilitates the care of plants. Approaching the arrangement and design of a flower garden with a soul, you can turn it into original decoration garden or area. And, oddly enough, all kinds of improvised materials are best suited for this.

The efforts and time spent on creating a flower bed can be wasted, and its appearance will only cause some moral satisfaction for the work done, if you do not follow certain rules arrangement of a flower garden. The flower bed will become the pride, highlight of the site or garden and will delight those who still have to contemplate it, when performing the following mandatory steps in the proposed sequence.

First of all, it is necessary to foresee and, if possible, create favorable conditions growth, high-quality drainage and regular watering are the main rules for planting and growing any plants, including flowers. For this you should:

  1. Choose, taking into account the natural conditions of the area where they are supposed to land.
  2. Choose a place and draw on paper, taking into account the location of nearby residential and commercial buildings, as well as natural conditions terrain.
  3. Mark out the future flower bed at the selected location.
  4. Prepare the soil for planting a flower garden and create conditions for its regular watering after planting.
  5. Design, equip flowerbed fences.
  6. Sow seeds or plant seedlings.
  7. Regularly look after the created flower bed, including watering it in a timely manner and removing weeds.

When performing the second paragraph, it is taken into account that flower beds are usually arranged in open spaces so that the flowers on them are clearly visible from any side. The shape of flower beds depends on the imagination of the person creating them and compatibility with existing elements and details of landscape design. Flower beds can be:

  • square;
  • round;
  • triangular;
  • diamond-shaped;
  • complex shape, consisting of several figures.

Almost any materials and objects, including improvised ones, are suitable for decorating a flower bed. It is important that the created flower garden and its fence are in harmony with the surrounding landscape and its elements. Things and objects that have become unnecessary, but it was a pity to throw them away, can serve as an excellent basis for making an original flower bed. To do this, you just need to show imagination.

Suitable improvised materials can be found in a landfill, which is full of various useful goods, and you can find literally everywhere, as they say, under your feet - the same stones, bricks, bottles. However, you should not place too many artificial objects on the area of ​​\u200b\u200bone flower garden, as the appearance of the flower bed can become like an overgrown trash can. It is necessary to observe the measure and correctly select both the materials themselves, the elements, and their ratio.

There are a great many ideas on what and how to use for making flower beds from improvised materials. The simplest and some of the most original are offered below. The financial costs of implementing these ideas will be practically equal to zero or a few kopecks, and the created flower beds will be unlike any other in the area.

Flowerbeds from the most affordable improvised materials

Very often to create small flower beds use worn tires. The simplest and traditional way use of tires: lay them in the selected places and, preferably, paint them in any preferred color with enamel or oil paints; after drying, pour fertile soil inside, into which then plant flowers. Such flower beds can be placed along the house, garden paths and even form a whole composition of small flower beds from them.

But there is more difficult ways the use of tires, respectively, and the created flowerbed fences will turn out to be much more attractive. You can lay out the tires in the form of a pyramid, at the base of which there will be one with the largest diameter, and at the top with the smallest. Or place several at the bottom, and in the next tiers reduce the number of wheels, reducing them to one at the top. So you can create a stepped pyramidal flower bed almost any size and height, although flower beds of 2-3 “floors” (tires in height) will probably be optimal. Before installing the next tier, soil is poured into the wheels of the previous one.

In the second option, when the "floors" consist of several tires, it is better to overlap the wheels of the next tier with those lying in the previous one - this way the structure will be more stable, and the flower bed will be more beautiful. Tires can be dyed different colors and plant in them various flowers. You can also work on the appearance of the tires. To do this, you need a jigsaw and very sharp knife. The tire must be laid on a flat, dry surface, and then cut off its upper side part - the bead. Due to this, a more attractive fence will be made at the same time and the most usable area for planting flowers will be obtained.

The cut can be made not exactly in a circle, but cut out waves, petals or cloves with a jigsaw. In this case, it is necessary to make a preliminary marking, for example, with chalk. When finished with sawing, turn the tire inside out. The result is a kind of smooth vase, according to appearance which, after painting it and planting flowers, you can’t immediately say that it is from a tire. Using the same knife and electric jigsaw, you can cut out various shapes from the tires, which will not only decorate the flower beds, but will also be real masterpieces of garden design.

Alternatives - empty bottles and tubes

Ideal for fencing flower beds empty bottles- also very available material. It doesn't matter if it's plastic or glass. They can be left empty, especially if they are made of colored material, but it is better to fill them with shells, multi-colored pebbles, small pebbles or other filler. Bottles just need to be dug into the ground along the contour of the flower bed upside down. But you can dispose of them in a different, more original way.

For example, you can make round flower beds, the fence of which will be made of bottles lying on top of each other in several rows with necks directed towards the center of the flower garden. Glass containers are best suited for this. The first row of bottles must be laid on a rigid, even base - for example, an iron sheet or a concrete pad. Between themselves, glass containers must be “tied” from the side of the necks with the help of cement mortar. They also need to be carefully plastered inside flower beds. Then, after the solution has set, fertile soil is poured into the flower garden and flowers are planted.

From plastic bottles large capacity, from 5 liters and above, make separate small flower beds. The containers can be laid on their side and cut out a part of the wall from above, and fill the soil inside and plant flowers. If the bottles are painted in the same way and arranged accordingly, and then arranged, showing imagination, in a small group, then you can get a small family of piglets, lambs or other animals on the site. Such flower beds can be easily transferred from one place to another, if necessary, thereby changing the appearance of the garden.

Scrap metal or asbestos pipes also perfect for making flower beds from improvised materials. All that is needed is to simply dig the products selected along the length vertically to the desired depth into the ground, and then paint. At metal pipes the buried part is preferably pre-treated with an anti-corrosion compound. Products of large diameters can be used to decorate individual small flower beds - soil is poured into a dug-in pipe and flowers are planted. Trimmings of small diameters are placed in a row along the contour of the flower bed. If there are pipes of large diameters in such a fence, then plants can also be planted in them.

We use natural materials

Stones are used to fence flower beds. They can be dug along the contour of the flower garden or laid out on top of each other in several rows. It is best for this to pick up as flat stones as possible of approximately the same size. Small pebbles can be used to make a permanent flower bed that will remain in place for many years. Along the contour of the future flower garden, it is necessary to dig a shallow trench.

It is necessary to set the formwork of the desired height into it and pour cement mortar, into which beautiful small pebbles should be pressed before it sets. Shells, fragments of broken glass or tiles are also suitable as decor. If there are unrooted stumps from cut trees on the site, then this is a great chance to create flower beds with beautiful fence in harmony with the vegetation of the garden. It is enough to cut the middle at the stump to the desired depth, fill the soil into the resulting recess and plant flowers. If desired, a stump with outside color.

Blocks, logs and parts of cut tree trunks can also be used in a similar way. Moreover, it is not necessary to dig them in or install them vertically - you can lay them horizontally. In the upper part, you must first make a shallow drink. Then, along the contour of the resulting cut, the wood is removed deep into the log, where the soil is then poured and flowers are planted. From individual logs, completing them various elements made of wood, you can make various original flower arrangements- for example, a composition of a train and trailers with plants.

Wood material is also used more prosaically - from beams or logs with a small section, they lay out the fence of flower beds of various geometric shapes. correct forms(including various polygons).

The most original flower beds - from furniture and bicycles

The most original creations, not all of which may be to everyone's taste, come from the items and objects we use in Everyday life. For example, a flower bed from the body of an old car. He needs to remove the engine, hood, clear the trunk, and you can cut off the roof. Containers for flowers are installed in the vacant places. Some manage to make flower beds out of bicycles by placing flower beds on his trunk, seat and frame. An old boat is perfect for a large flower bed. And someone uses a regular bath.

From the outdated various furniture very nice and very unusual flower beds are also obtained. Everything is suitable for this: cabinets, chests of drawers, bedside tables, beds, tables and even chairs. They are dug to some depth in the ground or left to stand on their legs. After removing unnecessary elements, soil is poured into the vacated places or containers with it are installed. Planted lush flowers. Backs and highs vertical elements serve as excellent supports for ivy and loaches. Some use various utensils, toilet bowls, shoes, TV cases or CRT monitors, and much more to make flower beds.

To decorate their site, some summer residents build unusual flower bed trying to decorate the territory a variety of crafts from improvised materials. The main thing here is not to overdo it with the elements. It is better to try to successfully fit them into the overall concept of Flowerbeds in the country with your own hands from improvised materials is a kind of small work cottage design. And everyone can do them. Enough to have necessary tools and the desire to create beauty.

Flowerbeds in the country with their own hands from improvised materials

What is useful for creating flower beds?

For decorating blank walls suburban buildings use old materials at hand, for example, window frames. They are attached to the wall, imitating a window, while removing old glass. Flower boxes or containers can be inserted between the frames. You can also use old furniture and saw cuts from trunks or large branches of trees, making a flower bed in the form of a flower train. For rain protection wooden details handle by special means. The trunks of old sawn trees are ideal for building a flower garden. In the middle part of the trunk, a cavity for the flower bed is cut down, filling it with soil.

As an improvised material for a flower bed fit:

  • Rods. From several metal rods and remnants of linoleum, you can weave a basket. It is enough to fill it with soil and plant flowers. You can also surround it with large bush plants (peonies, daylilies). At the same time, it will serve as a support for supporting the stems.
  • Pipes. From leftovers plastic pipes they make vertical flower beds, which, due to their shallow depth, are suitable for planting flowers that have a shallow root system. A similar structure can also be used as a planter, where small containers with flowers are placed.
  • Bottles. When constructing flower borders located along country paths, inverted plastic bottles painted with colored paint are used as a fence. Also made from plastic bottles vertical flower garden. To do this, they are cut, painted in bright colours, hung on a fence or a blank wall of summer cottages.
  • Tires. Old car tires are especially popular with many summer residents. Of these, flower beds of various configurations and sizes are constructed. These are multi-tiered flower beds, and various crafts in the form of animals, birds. From old tires, plastic bottles, you can build an imitation of a pond, a swan lake, using combinations of white and blue flowers with small patches of a different shade.

Flowerbeds in the country with their own hands from improvised materials are economical, interesting and practical. In some structures, drainage holes should be made. To create a unique and original flower bed, it will take a certain amount of time and effort, but the result and positive emotions from the work done will compensate for all the work. The advantages of a flower garden built from improvised materials are the availability of funds, the ability to show one's own imagination, and a variety of ideas. But what flowers can be planted in flower beds from improvised materials?

How to make flower beds from perennials with your own hands?

The construction of flower beds from will help decorate any, even the most unsightly space, giving it charm. Such flowers will grow for more than one season, causing increased attention to themselves. The main thing to pay attention to is the choice of plants. The most advantageous option would be to organize a flower bed of perennials, in a free, well-lit space. Is it possible to do beautiful flower beds from perennials with your own hands? Undoubtedly. This will require not so much - desire and a little time.


Flowerbed of perennials

Perennial flower bed: a choice of colors

Fences, walls of houses and buildings often have multi-level flower beds. Tall perennials, in this case, are planted in the background. The center is given to medium-sized plants, and the edge is given to undersized and ground cover flowers. Astilba, lily, rose, peony, phlox, delphinium, clematis, hosta, rudbeckia and others are planted as tall plants. medium height perennials- this is iris, tulip, cornflower, lavender, primrose, fern. Undersized and ground cover plantings- periwinkle, geranium, carnation - grass, lungwort.

Tall plants are planted in single specimens, while low and ground cover plants are recommended to be placed in a group of several pieces. In order for there to be no empty places in the flower bed on which weeds will begin to grow, flowers are planted close to each other, but not forgetting about the distance.

An example of a flower bed with undersized unpretentious perennials:

  • Panicled phlox, which has a pinkish or purple hue, begins to bloom in the second half of July and ends in autumn.
  • Astilbe of various varieties. It begins to bloom in June and continues until the second half of August.
  • Daylily purple - silver color. Should be planted in the spring.
  • Geichera, which has leaves that are painted in gray - silver and lavender. Flowering lasts from May to the end of July.

  • Stock - a rose (mallow), which has terry buds, will delight with its flowering from July, until the onset of cold weather. Flowers can be salmon, yellow, purple and other colors.
  • Sunflower ornamental, blooming in August and blooming until early October. It has good growth and has medicinal properties.
  • Icelandic poppy - the best option for such a flower bed because of its long flowering, which begins in May and ends in autumn.
  • Lobelia cardinalis will delight not only with red flowers from July to the end of September, but also with beautiful leaves.
  • Kotovnik. Begins to bloom in May. Its inflorescences are similar to lavender.
  • The bell, which has a variety of colors of buds, blooms in June and ends in September.
  • Katanhe "Blue Cupid" blooms all summer with inflorescences in the form of a bluish basket.
  • Herbaceous perennial gravel will serve as an excellent addition to the flower bed.
  • Bush sedum "Matrona" with charming flowers, retains its decorative effect until the first snow.
  • Geichera, in the form of a small bush has long flowering all summer.

When organizing any flower bed, it is recommended to plant plants in the following quantity: undersized and ground cover plants, 7-10 pieces each, medium-sized ones - up to 5 pieces, tall ones - no more than 3 copies. When forming a flower garden, it is important to give it original form. Don't be afraid to choose contrasting colors plants, as well as planting plants with decorative foliage along with flowers.