Ceiling from wooden beams. Wooden beams on the ceiling: the choice of style

Initially, the ceiling beams were by no means decorative elements of the room, they took on all the loads from the roof of the house, and at the same time served as a support for attic floor. Over time, beams on the ceiling began to be increasingly hidden from view as an unnecessary element, but in our time, interest in them has returned again, and more attention is paid to the decorative aspect. And at the same time, the ceiling beams acquired a completely new appearance and began to perform a lot of new functions.

Functions of ceiling beams

Ceiling beams today decorate ceilings not only in rural dwellings, but also in country houses and urban apartments made of brick and concrete. These elements of an authentic interior are very attractive to residents. stone jungle". Therefore, open beams are increasingly decorative, without losing their functionality.

Ceiling beams can be used in any room. They organically look in the living room, office, bedroom, library and even the hallway. Their massiveness and quantity is determined overall dimensions rooms. AT spacious kitchen you can "dot" the entire ceiling with large beams, and in a small hallway you will need only a few pieces.

Decorative beams are a simple and very inexpensive way to original finish ceiling. But do their virtues end there? Why are beams still so popular, and how to beat the beams on the ceiling? Let's look at what functions ceiling beams can handle:

The problem of high ceilings. If the ceilings are high, these designs will successfully emphasize the volume of the room. If the room is too high, which deprives it of comfort, ceiling beams can be placed low under the ceiling to visually lower its level, and the feeling of the volume of the room will become more comfortable.
Low ceiling problem If in your home the low ceiling is crushing with a load, then to correct this shortcoming you can try this approach. Beams from the ceiling should go to the walls. At the same time, not quite a beam can go along the wall, but a thin plank to match the beam.
Decor attic space. In attics and attics, the design of a pitched ceiling with the help of beams will help bring order and harmony into the space.
Changing the optical perception of the room. To visually expand the room, the beams should be arranged in width. Well, the placement of structures along the wide side of the room will make it look more elongated. In order not to change the geometry, but to add volume to the ceiling, you can install beams with a "lattice" - crosswise or "herringbone".
Functional zoning of the room. One large ceiling beam is able to divide the room into several zones: in this case, you need to mount the structure at the junction of functional zones - for example, above the bar or dining table. On the other hand, you can trim a certain area with beams, so it can be distinguished from the background of others.
Unusual lighting. On the most ordinary ceiling beam, you can fix recessed lights, LED backlight, hang or tie large chandeliers to it on chains. Beams are often used to decorate niches in plasterboard structures and create spot lighting.
Hiding communications. "Hollow" pseudo-beams can mask communications that go along the ceiling, for example, wiring. Structures that imitate beams are often used as boxes for mounting fixtures. Such beams have U-shape, they are hollow inside, so they can even hide pipes.
Optimization free space. In the kitchen, various holders and hooks can be installed on the ceiling beams, hanging baskets, utensils, dried bunches of herbs or a glass holder on them. You can even attach a TV panel on a special bracket to the ceiling beams, “air” chairs or swings, if these are, of course, real beams, and not their imitation.

The use of beams in the interior

Beams can be used to decorate the ceiling in the interior in almost any style: from historical classicism to modern high-tech. Well, when it comes to the interior in ethnic styles, then the ceiling beams will come in handy. Therefore, it is so important to know how to decorate a beam on the ceiling.

If you prefer classics with a claim to luxury, then these designs can be decorated with carvings, paintings and vignettes. Coloring in a gentle tone and “under silver” is also suitable. Smooth lacquered ceiling beams look appropriate in a strict classic interior.

Smooth beams are also suitable for modern interior. Here, these elements look no less impressive. Bold decisions and creativity are allowed here. Therefore, you can paint the beams not only in traditional white, black and dark brown, but also in bright colors - red, blue or even pink.

In a high-tech and loft-style interior, the beams can be painted with a coloring composition with a metallic effect or metallic. Often, ceiling beams are adjacent to "bare" light bulbs and exposed wires, as well as brickwork on the walls. Such "industrial aesthetics", appeal to the theme of old abandoned warehouses and factories turn the dwelling into a modern luxury apartment.

For a country or rustic interior, it is certainly recommended to choose beams that imitate aged wood. Moreover, the designs can be dark or light, it all depends on the overall color scheme of the room. Distinguishes their texture and roughness. If we talk about the French rural Provence style, then it is better to use more elegant and neat whitewashed beams.

Real solid wood beams are considered a luxury. Moreover, the presence of wooden beams in the house as structural elements should be foreseen in advance, even at the construction stage. In most cases, it is not advisable to mount wooden beams for the sake of aesthetics: they are too heavy.

Therefore, they often turn to imitation of wooden beams, which is indistinguishable from the original. These products are usually made from polyurethane. Polyurethane ceiling beams weigh little, which simplifies the installation process. Their price is not high. They can look in different ways: like smoothly polished beams that are varnished, or like beams from ancient cracked wood.

How to hide beams on the ceiling

So, we figured out the persistent owners who want to decorate their ceilings with a similar decor. But the happy owners of houses with beams are trying to make these elements invisible, which is why they are interested in how to hide the beams on the ceiling. In addition, beams can often have various defects and differences in height, usually this is the case with the general unsatisfactory condition of the interfloor ceilings.

Stretch ceiling

The first option for closing the beams is the installation of the well-known stretch fabric from PVC film or fabric. In this case, the ceiling will have to be lowered to the width of the masked ceiling beam. But using this technique, you need to remember that in this case another danger may arise - loss of space. The ceiling may drop too low. Therefore, it is better to equip a multi-level stretch ceiling, which significantly "presses" the ceiling and adds space.

Plasterboard box

The second option, how to decorate beams on the ceiling, is to create suspended structure from drywall, which has the shape of a box. The frame should look like the letter P. Remember that the frame should be attached directly to the ceiling, but in no case to the ceiling beam itself - you cannot make holes in it, otherwise the beam will lose its original properties. The minimum indent from the base of the drywall construction is 15-20 centimeters, and the stretch fabric is 2 centimeters.

With help drywall sheet you can create a cornice part of the ceiling with LED lighting. The backlight is hidden under a plasterboard cornice, which is attached directly under the protruding ceiling beam. Neon tubes, long halogen lamps or a flexible duralight cord can serve as light sources. Not recommended for use fluorescent lamps due to the excessive bluish tint that is given to the interior. Spotlights - not the best the best option, since the backlighting should be continuous.

coffered ceiling

There is another option for finishing the ceiling with beams, more refined and more expensive - decorating by creating caissons. This ceiling consists of ceiling beams, cells, curbs, cornices and recesses. Moreover, the cassettes can be square, diamond-shaped or polygonal. In the practice of interior design, round caissons are also known.

On the coffered ceiling you can beautifully decorate the longitudinal and transverse ceiling beams, for example, with ornaments and light sources. In addition, the presence of such beams will save time on the installation of a supporting lattice frame for mounting cassettes, because the beams are already there! Such ceilings can give the room a solid and impressive look.

Edged board sheathing

The easiest way to hide the beams on the ceiling is to use edged boards or lining. All surfaces of wooden beams are closed along one lower horizontal and two vertical planes. Their corner joints remain uncovered if the ends are precisely adjusted, or the joints are covered with wooden corners.

In case of edged boards they need to be sanded and painted. Sometimes the material is pre-fired blowtorch and then coated with clear varnish. Recently, it has become fashionable not to grind such beams and boards, but rather to make their surface uneven with round wire brushes. The shank of such a tool must be inserted into a conventional electric drill and relief marks are applied to the surface of the beam.

Original decoration methods

Sometimes ceiling beams are plastered with different plaster meshes and covered with paint imitating marble or other natural stone. Often, ceiling beams are decorated with ropes. A similar technique is often used in the Mediterranean, eco and country style, when the aesthetic component is put in the first place. The beam is simply “revitalized” by wrapping it around with a rope.

If you have not yet found a way to close the beam on the ceiling, you should pay attention to the following original way. You can make a built-in wardrobe and completely hide the beam. In this case, you will have a lot useful place to store things.

Ceiling beam repair

The most unpleasant thing when working with ceiling beams is the moment when they begin to sag over time. If the tree is not damaged, and the deflection was formed due to overload insulation material ceiling surface or an incorrectly selected section of the ceiling beam, it will be possible to correct all errors with minimal cost, strengthening old beam with the help of a helper.

Measure the height of the deflection and the size of the subsidence of the beam with a level. Then you need to remove the crossbars from the edges of the sagging beam in order to place an additional beam there. It is also necessary to measure the length and cross section of the beam, pick up a board right size and preferably the same type of wood. Under no circumstances should a slab be used. If the board is slightly curved, you need to place it with the curved place up.

Place the new board on bearing walls if the edges of the new beam are not inserted into the support, notches should be made approximately 1 centimeter deep and 20 centimeters long. After that, you need to jack up the sagging beam, preferably a few centimeters above the horizontal. Then place the reinforcing beam next to the old one, fixing the crossbeams for the new beam in the supporting walls.

A wooden wedge must be inserted between the supporting wall and the end of the auxiliary beam. After that, align the slopes with the supporting wall until you get a flat, horizontal plane, attach a wedge, knocking with a hammer in such a way that it does not fall out. Fasten with screws. You can remove the jack only after a few days.

If there are doubts about the quality of the wood of the sagging beam, when it is strengthened between the joined bars, you can skip metal strips and attach to the reinforced puff. Wood that is used for repairs is recommended to be treated with antiseptics, and all hardware prime.

Today, the design of houses in rustic style, not only because of its extraordinary originality, but also due to cost savings, since it does not require large expenses. Sometimes it is enough to use wallpaper with a floral print, adding wooden furniture in in large numbers and cozy details. The final moment will be decorative beams on the ceiling. They are never redundant, regardless of style.

Beams as a universal design element

They can be found in a very unexpected use case. They adorn both modern high-tech and majestic classics. Concerning ethnic interior, then the main stylistic feature here is precisely the decorative beams on the ceiling, the photo of which is presented below. Without them, it is impossible to create a realistic picture. Competent design is able to highlight belonging to a particular style. Classic interior add luxury ceiling structure covered with paintings, carvings and vignettes. Silver and pastel colors are also used.

At the same time, lacquered decorative beams on the ceiling made of wood with a smooth texture are suitable for this strict classic. Such models look great in modern home. The difference is that such an interior is more suitable for bold decisions, so it is possible to use both neutral and flashy shades. Among design solutions you can find blue, red and pink colors.

Metal beams are found in high-tech and loft. It is possible to form a structure from elements of other textures, but they must be painted special paint to simulate a steel sheen. Brick masonry will be an excellent companion for beams in such interior options. Details of the loft style furnishings can be used both in the house and in the city. small apartment. Shine of metal and glass, with the addition of "bare" light bulbs, a little facing brick, beams - that's the right atmosphere is ready!

Colorful decorative with the effect of aged wood are good for a rural interior. They may have a rough texture, dark colors, which do not have to be in harmony with the main tone of the space, since the contrast is very relevant here.

Beams in Provence amaze with their accuracy and elegance, so the use of bleached options is a priority.

What are the types

Wooden structures are classics of the beam genre. This is the leading part rustic interior and ecostyle. Traditionally, pine, ash and oak are used for the production of high-quality beams. They can be hollow and made from a solid array. The first option is more often used due to the possibility of hiding unsightly communications.

Metal beams are more modern, but their installation is not complete without professional help because they are heavy and oversized. It is not worth saving here, since poor-quality fastening of the structure is too big a risk.

More budgetary are decorative beams on the ceiling made of polyurethane. Their cost is low, and installation does not require large time and financial costs. Such products are hollow inside and quite light. The material is unaffected high humidity and does not absorb odors, while it is possible to imitate the color and structure of wood, which is why it has become widespread in bathrooms and kitchens.

Mounting Methods

Installation can be done various methods. At small size the structure is attached to liquid nails. For other cases, it is necessary to create a crate from a wooden or metal profile and the use of self-tapping screws. The combined method is relevant for heavy and long beams. Formed on the ceiling wooden blocks on which structural parts are attached with glue.

Color spectrum

The stylistic orientation directly affects the shade of the beams. To give expressiveness, emphasis is placed on contrast. So the design becomes the main element that attracts attention.

The interior will acquire softness through the use of beams that have the color of the ceiling itself. At the same time, they do not go unnoticed and add volume, dynamics and structure to the ceiling. Harmonious combination make up the decorative beams on the ceiling with a wooden structure or painted white.

There are many options for combining shades, it all depends on the features of the chosen interior solution. Beams can reflect wood furniture or floors, contrast with ceilings, or match wall paint. There are no established canons here.

It is worth remembering that the space acquires weightlessness through the use of white beams, while black ones make the atmosphere rigid and graphic, and wooden structures bring calmness to the interior, although they look a little cold.

Story

The beams that were present on the ceilings of old buildings initially had by no means decorative purpose. They were load-bearing structures that were used as and took on the weight of the roof. Over time, the beams were considered superfluous and began to be hidden with the help of decoration. They were rehabilitated due to the longing for a colorful design and now they have become relevant again, but only as decorative element.

Where are beams used?

Such details can be found in absolutely any room. They are able to decorate the kitchen, look organic in the bedroom and living room, will be useful in the hallway. The size of the room determines the number and their massiveness. For example, in a large living room, decorative beams on the ceiling can be used in unlimited quantities, while for modest hallway do not use more than two. When located on the ceiling of the kitchen, it is added and functional purpose in the form of hooks for all kinds of utensils and holders for wine glasses.

To each his own

Decorative beams on the ceiling are perceived differently. Someone certainly wants to build a massive structure in the usual "Khrushchev", and some owners of houses with load-bearing beams want to add functionality and make them less visible.

In terms of expanding functionality, the most common use is to attract structures to illuminate the space. It is possible to create very non-standard elements. For example, fixing a chandelier on chains and inserting point light elements into beams. The installation of luminaires with remote mechanisms is rational in the design of metal beams.

LED lighting can be laid on top of structures. This method will give the beam the effect of floating in the air. Such a design innovation is especially relevant when combining films and PVC beams.

Rope trim is a common technique among designers. In this case, both the environmental friendliness of the decor and its aesthetic basis remain the same. Decorative wooden beams on the ceiling with rope winding are common in ethnic, mediterranean style and country.

If desired, beams can be disposed of using a radical method - stitching. Suspended ceilings are able to cope with this task.

How to attach decorative beams to the ceiling

The heaviest elements are made of wood, so fixation of increased reliability is required here. You can make them from a bar yourself or purchase already ready-made version. In the first case, it is desirable to choose wood with a shrinkage of no more than 12% and no traces of rot and visible flaws. It is worth treating with antiseptic agents to protect the material from insects, mold and moisture.

The literacy of the installation of the structure depends mainly on the correctly applied markings. Before installation, it is recommended to mark the attachment points of the profiles with the help of an upholstery cord, tape measure and level, and only then proceed to further work.

Among the main advantages it is worth noting the efficiency and ease of fastening. All elements are lightweight, so the standard length of the polyurethane beam requires the use of only three wedges.

Change of space

Do-it-yourself decorative beams on the ceiling are easy to make. They are able to adjust the geometry of the room. maybe visual expansion premises due to structures fixed along the width ceiling covering, and for lengthening, the components are mounted in the form of perpendicular lines.

If the ceilings seem too low, then it is worth making a continuation of the beams on the walls themselves. Laying crosswise will not bring adjustments to the space, but will add volume to the ceiling. high ceilings allow you to lower the beams to the desired distance and fix them on the walls.

Useful Features

Along the longitudinal center line of the future location of the beams, you can place any communications that will become invisible after installation. This solution is very convenient, since there is no need for complex work for pulling communications in the walls or under the floor with expensive and energy-consuming gating. In this case, there will be no unnecessary material and time expenses, as with separate concealment of air and water type heating, air conditioning and ventilation systems.

It should be noted that communications located in the subceiling space are not only invisible, but also protected from mechanical damage. Moreover, the installation of decorative beams on the ceiling provides many options for translating ideas.

Conclusion

The history of beams begins in the distant Middle Ages, and today it is possible to create an interior that resembles ancient castles and add the appropriate atmosphere. This decorating technique has become convenient way hiding certain structural flaws in the room. A room with decorative beams on the ceiling acquires a clear correct form, it is comfortable and spacious. Therefore, when setting up country house or apartments worth paying attention to. Perhaps they will become the main part of the entire interior.

There are many beautiful ceiling decoration techniques, one of which, of course, are beams. Made of metal or wood, beams can be part of load-bearing structure, but also, the ceiling is often decorated with decorative elements made of polyurethane, plywood and drywall, stylized as natural wood.

It is worth noting that for those who strive to create a unique atmosphere in their home, ceiling beams can greatly help in this. Although before their installation is carried out, one should take into account such nuances as the height and volume of the room, since in small room such an element would be clearly redundant.

When deciding to install decorative beams, it is important to think in advance how the ceiling will be illuminated, since visually it will become heavier and lower. It is this issue that we will address in this article in the expectation that today it will become useful and timely for our esteemed readers.

Rule 1: there should be a lot of light

The space, the ceilings of which are decorated with decorative beams, a priori cannot be cramped and low. Therefore, if you use such elements in the upper part of the room, then the room has a significant height and volume. In turn, a large room involves the use of high-quality and very plentiful lighting in all main functional areas. And the ceiling, decorated with decorative beams, only emphasizes this need.

So, first of all, you should take care of the presence of not only the upper flood light (chandeliers, spots or spotlights, suspensions), but also provide an additional one (sconces on the walls, desk lamp, floor lamps).

Remember, a large room with ceilings decorated with wooden beams (decorative or load-bearing) should literally be buried in bright warm light.

Rule 2: simplicity is key

Ceiling beams are spectacular independent way decorating the ceiling and the room as a whole. Such elements immediately attract attention, competing with less accent objects.

So, precisely because of its catchiness, it is better to highlight the beams with devices that are devoid of all sorts of excesses. For example, an excellent type of lighting fixtures, in this case, will be spots ( Spotlights), searchlights, diode tape, light suspensions on cords, lightweight options for chandeliers.

In some cases, when the ceiling beams are the supporting elements in a high room, chandeliers with suspensions in two or three tiers may be appropriate. But, nevertheless, even here you should not get too carried away, but know when to stop.

Rule 3: It's Important to Minimize Shadows

Interestingly, the more often the beams are located on the ceiling, for example, rhythmically in thrust, or in the form of caissons (crosswise), the large quantity you will need fixtures in order to qualitatively highlight the ceiling.

The thing is that the beams cast unnecessary shadows on its surface, therefore, the ceiling visually becomes darker, making the space heavier.

It follows that the correct number of lighting fixtures, alternating with decorative beams, will help visually maintain the real height of the room, as well as form a kind of beautiful rhythm of the beamed ceiling.

Rule 4: you need to bring the light closer

By installing spotlights around the perimeter of the ceiling with beams, you are definitely doing the right thing, because this way it will become lighter and brighter. At the same time, it is possible to qualitatively illuminate a certain area (working in the kitchen or sofa in the living room) only with the help of directional light devices.

For example, for additional illumination in a room with a beamed ceiling, you can use the functional hanging lamps by installing them in the cooking area or dining room. By using long cords the height of the devices is convenient to adjust, so the necessary functional area get enough light.

Rule 5: distribute lighting evenly

The ceiling, decorated with beams, carries with it a visual load and makes the room darker, which leaves no doubt. Therefore, even if the dimensions of the space are significant, and there are many large windows, beams should be illuminated along the entire perimeter of the ceiling equally. This does not mean that you will have to make additional holes for spotlights, or install a chandelier in the four corners of the room, but it will be appropriate to use guides or strings with spots (spotlights).

As a result, it seems as if twinkling stars hung in the thick powerful branches of the tree, which is unusually beautiful.

7592 03/08/2019 7 min.

The kitchen interior with decorative beams on the ceiling will appeal not only to creative people, but also to people who are more mundane. This element immediately catches the eye, looks very unusual and interesting. This kind of creativity is just what you need modern man absorbed by the bustle of the city.

Beams on the ceiling in the interior of the kitchen

The ceiling in the kitchen with beams is interesting and gives the kitchen a warm country style

In the countryside, you will not surprise anyone with beams on the ceiling. There they are the bearing supports of the entire structure of the house. In urban dwellings, they are used mostly in decorative purposes in . With the help of beams, designers achieve originality in kitchen interiors. Often, polyurethane false beams are used for these purposes. This attribute has its pros and cons. And it is not suitable for every kitchen. That's why you need to be smart about choosing decorative beams so that they perfectly complement the ceiling design.

Advantages and disadvantages

Pros of beams on the ceiling:

Well, this style fits into the styles of a chalet, country and other ethnic interiors.

The advantages of beams in the kitchen are undeniable, but they also have one drawback.

At misuse these elements can visually reduce the room. This applies to kitchens with low ceilings.

Types and materials of their manufacture

Beams in the interior of the kitchen, see the solution in our video:

Beams can be a component general design country house or play only a decorative role. In the first beam completely combines the function load-bearing element and aesthetic challenge. Similar attributes are made of wood.

Wooden

Pine and spruce are most often used as materials for beams. Less often, but also there are ash, oak.

Advantages:

Beams are completely natural, these are environmentally friendly and safe products;
Give the kitchen comfort reconnect with nature.

Flaws:

In apartments, apply carefully: subject to temperature fluctuations, exposure to moisture.
For some kitchen interiors such as wooden beams look too massive.

The price of wooden beams is an order of magnitude higher than for attributes made from other materials. Wood exposed additional processing. If this is not done, it will not serve for a long time. Do not forget about the cost of giving the tree a decorative look.

Drywall false beams

Such beams can be painted in any color.

AT construction stores you can find ready-made drywall beams. If desired, choose elements with imitation wood of any shade.

Advantages:

The disadvantage of the products is one: they are not resistant to mechanical stress.

From metal pipes and rails

Metal beams will make your kitchen more industrial

Beams from metal pipes look stylish and impressive due to the special shine. They can be given any shade with paint. But at least two people must carry out the installation of such a product due to the impressive weight of the structure. During installation, metal beams also serve as an air duct.

Ceiling beams in the style of the kitchen

Beams can decorate the interior of a kitchen of any style, you need to correctly choose their design, shade and material of manufacture. Parts can be painted solid color or create a contrast with the ceiling. In many cases, ceiling beams will be great.

Country, provence, chalet

Country or Provence ceiling beams are very often used

The country-style kitchen has a maximum of natural natural materials. ceiling products made of wood, processed stone. Polyurethane beams imitating these materials are also suitable. Wooden crafts may be artificially aged.

Beams in color must be in harmony with the shade of furniture and accessories.

Long gone are the days when a beam on the ceiling was considered the lot of a rural dwelling and only served as a support for the ceiling and roof. Recently, decorative decks have found more and more fans, including among residents of megacities. They look appropriate and organic in a variety of, sometimes even unthinkable, design styles. But on the condition that you beat them correctly.

Initially, the ceiling beams did not play decorative role in the interior of the house. They were installed exclusively as a support for a heavy attic floor. If you got such a house at your disposal, then it is not necessary to hide these structures. After all, some style decisions require the presence of such a decor, and many compatriots, in the absence of such, even order the creation of non-hidden false polyurethane beams. In addition, ceiling beams are successfully used for space zoning, for example, for separating the working and dining areas in the kitchen, and for visually expanding rooms. Thus, with a little imagination and beating the old beams that have come into an unsightly state, you get a truly exclusive interior. As a decorative element, such products can be installed in the kitchen and in the bedroom, living room or office, as well as in the corridor, based on the size of the room. Methods for finishing ceiling beams if their wood has lost its attractive appearance:

The first option: you can decorate it with a false polyurethane beam, because this material successfully imitates the texture of wood.
In addition, you can decorate the structure with ropes, as in restaurants in coastal cities.
To hide the flaws in the surface of the beam, you can turn to the good old way of finishing - painting.
If the flaws are significant, all irregularities should be pre-sealed using putty and a primer. Then paint is applied, while you can give preference not only to traditional pastel colors but also choose the bold bright colors, which contrast with the general colors dwellings.
If you are decorating a room in a high-tech style, then you can choose a metallic shade of paint, adding such a beam with “Ilyich’s bulbs” and unmasked wires. But the French rural style suggests the presence of whitewashed ceiling beams.
For country style coloring composition should be with the effect of "aged wood".
If you wish, you should not just cover the product with paint, but apply painted elements to it using the services of an artist. Alternative a budget option- use for painting ready-made stencils.

Installation of the lighting system:

A popular idea for decorating ceiling beams is to install light sources, regardless of the material from which they are made.
Antique stylized lamps, for example, in the shape of a wheel, look best on a natural deck, and it would be nice to install light sources in the form of candles.
If the beam is thinned, then lighting should be delicate.
You can also use spotlights that cut into the frame or are carried out using brackets attached to the beam.
Another option related to lighting systems is installation on a beam. led strip. As a rule, it is attached around the perimeter of the room.
But if the room has an oblong appearance, then it is possible to mount one tape on the central beam. The backlit deck attached over the stretch ceiling looks original.

And now let's talk in more detail about how to beat the ceiling beam:

If there are ceiling beams in the kitchen, you can do this. Lower the beam below the ceiling level, subsequently fixing it in an immovable state. Attach hooks to the structure, on which various dishes are hung as a decor - from glasses to a frying pan, bunches of aromatic herbs, baskets and dried flowers, flower pots with indoor plants. In addition, this option is best suited for implementation in rooms with excessively high ceilings.
If the beams are real and in good condition, you can fix them hanging chair or swing. But remember that such structures cannot be mounted on an imitation, even a well-made one.
An interesting technique with which you can beat the ceiling beam is to create a reflection effect. Photo wallpaper should be glued to the underside of the structure or mirror tiles. Such a decision can affect the visual expansion, the room seems larger than its size.

But sometimes the owners of houses with beams, for various reasons, decide to completely disguise the ceiling beams so that they are not noticeable to the naked eye:

Stretch ceiling. In this case, the panel is lowered below the level of the beams. However, at the same time, the room loses height. And it is advisable to equip the tension structure, consisting of several levels.
Plasterboard ceiling. To disguise the deck, you should install a frame in the form of the letter "P" around it. In this case, the structure must be attached to the ceiling surface, and not to the beam.
Caisson ceiling. This option is the most sophisticated among the others offered and the most expensive. In addition to beams, this design involves the creation of other elements: cornices, borders, cells, recesses. Choose any cassette shape - rhombus, square, polygon.
Clapboard. The easiest option to hide the ceiling beam is to sheathe the surface with clapboard. A cutting board will also work.

The beams on the ceiling represent excellent opportunity bring zest to the interior, a sense of style and in some way enrich the home. There are many ways to restore, decorate, beat them in order to inner space looked complete. The most extreme option is to completely mask the deck.

Categories

Popular