Operated roof technonikol - features and components of the system. Roof ventilation technonikol Roofing system technonikol

TECHNONICOL received fire certificates for TN-ROOF Smart, TN-ROOF Classic and TN-ROOF SMART PIR systems using wedge-shaped thermal insulation made of extruded polystyrene foam, rock wool and rigid polyurethane foam (PIR) insulation as a slope forming layer.

Independent experts carried out work to confirm the characteristics fire safety TN-ROOF Smart, TN-ROOF Classic and TN-ROOF SMART PIR from TECHNONICOL. These roofing solutions widely used in the construction of facilities large area, including logistics complexes, shopping and entertainment centers, car dealerships, industrial enterprises and other objects commercial real estate. In updated certificates from the authority for fire certification NPO Pozhtsentr confirmed the class declared by the manufacturer fire hazard K0 (15) for each of these systems. A feature of the new certificates was the confirmation of the safety of the use of all types of wedge-shaped thermal insulation produced by TECHNONIKOL: sets of TECHNONIKOL stone wool slabs TECHNONIKOL CARBON PROF SLOPE and rigid polyurethane foam TECHNONICOL PIR CXM/CXM SLOPE.

The obtained certificates allow using both polymer and mineral wedge-shaped thermal insulation in TN-ROOF Smart, TN-ROOF Classic and TN-ROOF SMART PIR systems. The choice of the type of thermal insulation is determined by the characteristics of a particular project.

TECHNONICOL wedge-shaped thermal insulation is used to form a roof slope, which avoids the formation of stagnant zones, and also speeds up and simplifies roof installation even in winter.

XPS CARBON PROF SLOPE wedge insulation kits have high strength and light weight, which reduces the load on the base. This solution is patented by TECHNONICOL and has been used since 2009, having proven itself excellently at several hundred civil and industrial facilities as part of roofing systems. A set of non-flammable, hydrophobized plates TECHNOROOF H WEDGE provides a slope that creates an effective removal of precipitation and provides reliable performance roofs. TECHNOROOF N CLEAN is made from mineral wool based rocks basalt group. For the installation of a slope-forming layer, TECHNONICOL PIR PIR CXM/CXM SLOPE rigid polyurethane foam boards are also used. Due to the closed cell structure, the material has a low coefficient of thermal conductivity, does not absorb moisture, does not rot, and is also resistant to high dynamic and static loads, temperature extremes (from -60 to +110 degrees Celsius).

Obtaining fire certificates confirmed the high fire-technical characteristics of TECHNONICOL roofing systems in the case of using wedge-shaped thermal insulation to form the roof slope, while guaranteeing the fire hazard class K0 (15).

TechnoNIKOL is a leader in Russian market manufacturers roofing materials. This company began its history in 1994 with small production roofing material, and now its network has spread to many cities in Russia and has about 40 factories. Soft roof "TechnoNIKOL" is used for private construction in industrial scale and is of high quality and affordable price.

Features of roofing materials "TechnoNIKOL"

Soft roofing material is a relatively new product on the construction market, but has already become widely used. The TechnoNIKOL company produces such a view of it, which is perfectly adapted to weather just our country.

• PVC membrane for roofing "TechnoNIKOL"
• Flexible roof tiles
• Rolled and mastic roofing

Built-up roof "TechnoNIKOL" has certain features, which favorably distinguish it from analogues presented on the construction market:

• The basis of such a roofing material is fiberglass, coated on both sides with bitumen, to which special substances are added that increase its quality characteristics. On top of the material is basalt dressing, which can be different shades, whereby finished roof takes on an interesting color.
• The inner side is processed with a bituminous mass with polymers, which has the ability to adhere to the surface by welding.
• The outer layer is protected by a silicone-based film.

Soft roof has some properties that allow it to be used to cover any roof structure:

1. High resistance to mechanical influences.
2. Excellent waterproofing of the entire roof and its nodes.
3. The ability to make any design decision due to the variety of assortment.
4. Noise isolation qualities.
5. Resistant to temperature extremes and frost.

most visible distinctive features soft roof"TechnoNIKOL" from materials from other manufacturers can be called the absence of the need to use special tools during installation, as well as the ability to create with its help almost any shape. These include domed and bulbous roof structures.

A variety of types of soft roof "TechnoNIKOL"

When choosing flexible material you can choose among the company's products suitable for quality and price material among the variety produced. By price category roll roofing can be divided into the following types:

• Economy, characterized by simplicity and speed of installation.
• Standard - the material that can be used for laying on any roof structure.
• Business materials high class with a "breathable" coating.
• Premium - materials most High Quality with the longest service life.

The most famous are such rolled roofing materials "TechnoNIKOL":

Important! The TechnoNIKOL coating is attached to the base and at the junction points of the nodes by heating inside roll and gluing the sheet to the roof surface.

In addition to the listed roofing materials, in addition to common set to create a coating, you can purchase an aerator manufactured by this company. The installation of such devices will help to remove excess moisture in time, which often accumulates under the roofing cake and eliminate swelling of the material.

Soft tile "TechnoNIKOL"

Particular attention should be paid to flexible tiles domestic production from Technonikol. The brand of these products is called "Shinglas" and has been produced since 2003. The start of production was marked by the formation of a new TechnoNIKOL plant in Lithuania. The products were immediately distinguished by their high quality. This came about thanks to the purchase of new capacities and the ongoing scientific developments by the company. There is no other flexible tile in the manufacturer's assortment.

The production of flexible tiles is based on fiberglass. Mineral dressing of the surface of the material is additionally painted by ceramization, that is, when heated to 700 degrees. A rabbit treated in this way will not lose its decorative properties throughout the operation.

Flat roof solutions

Due to the fact that the company produces a wide range of roofing and waterproofing materials, can choose suitable solution for the device of a flat roof under any conditions. flat roofing system"TechnoNIKOL" can be performed on a rigid and non-rigid base.

The first option includes covering the roofs of residential and public buildings. The manufacturing company offers solutions for options with an unheated attic and those roofs that are related to combined type. If the attic is not heated, then the TechnoNIKOL Pro Site technology is used, which provides for the installation of two layers of Technoelast - top and lining. Before styling cement strainer treated with TechnoNIKOL primer.

Important! A layer of expanded clay gravel can create an optimal slope.

If there is a heated room under the roof, the technology for laying a soft roof changes somewhat - under expanded clay gravel a layer of thermal insulation is arranged from the TechnoNIKOL insulation based on extruded polystyrene foam, as well as a vapor barrier layer made of material polymer type on a bituminous basis Bipol. If you additionally install a roof aerator on such a structure, you can increase the efficiency of the presence of a heat-insulating layer by several times by preventing it from getting wet.

For industrial buildings, a system on a non-rigid base is used. It can be made by special roll materials, or a separate technology can be applied, which will help to obtain high quality finished coating. Also in this case, a special waterproofing of the roof "TechnoNIKOL" is used.

Conclusion

The product range of TechnoNIKOL is striking in its diversity. With the help of such roofing materials, you can arrange any shape and functional characteristics roof and at the same time choose the option that suits the cost.

Sergey Novozhilov - roofing materials expert with 9 years of experience practical work in area engineering solutions in construction.

TECHNONICOL roof ventilation is

1. Favorable ratio of the optimal technical solution, price and high quality workmanship;

2. Reliable design and comfortable operation;

3. Aesthetics and visual appeal;

4. Availability and durability.

TU 4863-002-737011851-05

Product Description:

Roof ventilation TECHNONICOL is produced under pressure using the casting method. Material - HDPE (polypropylene low pressure), enriched with substances that affect performance characteristics ventilation, increasing resistance to impact sun rays, heat resistance and frost resistance.

For production, plastic is used that is resistant to mechanical damage and aggressive environmental influences.

Main physical and mechanical characteristics:

Based on functionality ventilation systems TECHNONICOL are divided into accessories, under-roof and internal ventilation.

Certificates

The Stroymet company offers a wide range of TECHNONICOL products for reasonable prices -

A flat roof can be turned into a functional piece country house. The article tells about the exploited TechnoNIKOL roof, its advantages and differences from non-exploited systems. The proposed material will acquaint you with the features of traditional, inversion and green operated structures, give an idea of ​​the flat roof units and the intricacies of their installation.

Great opportunities for flat roofing

About flat roofs and their advantages

Flat roofs are becoming an increasingly popular option in suburban housing construction. Choice flat design may be part of the architectural design if the house is designed in modern style. The reason lies in the new opportunities - additional area(especially on small plot) is a significant plus for owners. Therefore, of particular interest is the device of an operated roof, which allows great benefit explore empty space.

Flat roof structures were not originally intended for active use. They were considered economical option due to the low consumption of resources (materials and construction time), in comparison with any pitched option. A few decades ago, designers and planners turned their attention to flat roofs as a source of new possibilities.

Modern TechnoNIKOL system

Exploited surfaces appeared after the development of new waterproofing materials and principles for constructing roofing systems; Exploited flat roofs of TechnoNIKOL, which have important advantages, have become widespread:

Durability. The service life reaches (and often exceeds) 20-25 years.

Physical parameters . The coating is extremely resistant to temperature fluctuations; designed for use in conditions from -50 to +100°C.

Technical specifications . The system has a fairly small weight, installation is carried out in any weather.

Waterproofing. The coating is completely waterproof; it will protect housing from heavy rains and snowmelt even during partial flooding.

Reliability. The mode of operation and possible loads are taken into account in the calculations at the design stage; the system is resistant to mechanical damage, rotting, mold formation.

Security. Modern technologies and the use of safe raw materials make the roof safe for humans and the environment.

Reliable moisture protection

Traditional (unexploited) roofs

If additional use is not provided, a traditional roofing system is equipped, feature which is the installation on thermal insulation; in this case, a vapor barrier is laid on the concrete base, then a layer of insulation and a final (finish) coating. In the TechnoNIKOL product line there is a variant of an unexploited design - an inverted roof with a ballast, which can be described as follows:

Main difference from traditional (classical) designs. The relative location of the heat- and waterproofing layer has been changed.

Pie structure. Waterproofing (membrane) is laid in layers, then insulation and geotextiles, which perform a separating and protective role. Sometimes geotextiles also separate other layers of the pie.

Ballast layer. Ballast made of crushed stone or gravel protects the waterproofing layer from accidental damage and UV exposure, which prolongs the life of the roof up to 25-30 years (if the installation technology has not been violated).

Flat roof gym

Among the non-exploited options, roofing according to the TechnoNIKOL profiled sheet (TN-roofing Classic) has become widespread. Its advantages include fairly easy installation, high fire resistance and a neat result (due to welding, the seams are almost invisible). The structure is based on a profiled steel flooring, an aluminized membrane serves as a vapor barrier, stone wool (absolutely non-combustible material) is a heater, and a polymer membrane is used as a roofing cake.

Operated roofs: types of structures

The classic flat roof can support the weight solar panels, climate systems and air conditioners. An exploitable flat roof is capable of much more: giving the building a complete look, it saves space. To maximize this important advantage, several options for operating systems have been developed. All of them rest on a rigid base in the form concrete screed. A multi-layer cake of TechnoNIKOL roofing (TN-roofing) is formed above the base, its composition determines several types of systems.

Roofing according to the profiled sheet

Traditional system

The exploited roof of the classical type has the following set of layers:

Base. The roof can be equipped only on reinforced concrete floors.

Vapor barrier coating. It is laid directly on the reinforced concrete slab. The purpose of the vapor barrier is to protect the next, insulating layer from moist air penetrating from below.

insulation. In order to lose as little heat as possible through the roof, a variety of insulating materials are used, from mineral wool to polystyrene.

waterproofing layer.

Coating. In addition to decorative properties, reliability is important for the finish coating; Therefore, materials with high wear resistance are selected.

Roof with gravel

On our website you can find contacts construction companies who offer . You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".

On the construction market, there are options for TN-Roof Standard Pavement and

TN- Roof Standard Pavement KMS; the structure of their roofing cake has a standard arrangement. The thickness and composition of the roof structure depends on what loads are expected:

Low. Such loads are typical for roofs in private low-rise housing construction, when they equip a terrace with a seating area for two or three people or install a small solarium. The design includes a standard set of layers and a light roofing.

Medium. If you want to arrange a terrace for relaxation big company or arrange playground, a different level of roof organization will be required. AT roofing cake will include more durable insulation, paving or porcelain tiles will act as a front covering.

Intensive. Loads, for example, from car parking, are high. The structure of the cake is reinforced with a second, high-strength insulating layer; The tile will have to be replaced with a reinforced concrete slab.

Video description

About the device of operated roofs in the following video:

On our website you can find contacts of construction companies that offer. You can directly communicate with representatives by visiting the exhibition of houses "Low-Rise Country".

inversion system

The traditional roof has a minus - the insulation is located immediately under the coating and therefore the likelihood of damage increases significantly. Through defects in the insulating layer, water accumulates in the insulation, reducing its thermal insulation effect and eventually penetrating into the housing. The inverted roof was designed to avoid these problems; its structure is characterized by a reverse (inversion) structure, when the insulation is located above the waterproofing. The TechnoNIKOL inverted roof is described by the following provisions:

Suitable for high load area devices. Compared with the traditional one, the inversion design has more application possibilities. It is used not only for arranging a recreation area, a walking area and a solarium, but also for parking or a summer cafe. Homeowners can count on winter Garden, decorative pud or pool.

Inversion system for pedestrian load

Design variation - green roof. Lawn planting, device flower beds, shrubs or trees attached to the building original look. However, ornamental garden together with a layer of soil - this is a serious load on the structure, so you need to think about the arrangement of green splendor in advance.

Material selection. Euroruberoid is used as a waterproofing layer, bituminous mastic or PVC membranes. For insulation, materials are selected that do not deteriorate upon contact with moisture; for finishing often choose paving slabs. For any project flat roof the drainage system is turned on.

Advantages of inverted roofs. Such systems are characterized by the most reliable waterproofing, which protects residential premises for decades. They can take a significant and uneven load; an additional bonus is higher thermal efficiency than traditional roofs.

Video description

About the option of installing an operated roof at home in the following video:

Minuses. Complex installation of a multi-layer cake increases the cost of construction. Technological errors made during the installation process will make the structure non-functional. The main drawback that occurs during operation is the accumulation of precipitation.

Common systems operated roof structures TechnoNIKOL (TN-roof), designed for pedestrian loads, are the following varieties:

TN-roof Pavement. The composition of the cake includes a drainage layer. Finish coat - paving slabs with abrasion resistance.

TN-roof Pavement KMS. With drainage membrane.

TH-roof Terrace. Lightweight system with plastic supports.

TN-roof Auto. under vehicle load.

Flat roof seating area

Green flat roofs

Green inverted roofs have the following features:

Restrictions. Not suitable for all types of houses; parameters are calculated during project creation.

Device principle. Ornamental plantings can be located in containers, in flower beds or lawns. The thickness and composition of the top layer of fertile soil is determined by the type of selected plants (features of the root system). An important condition functioning is a well-organized flow of water.

Material selection. Waterproofing and insulation must be protected from the root system of plants. The upper layers in the structure of the cake are responsible for this, diverting excess moisture and responsible for proper drainage.

Additional layers. An inverted green roof includes additional layers of filtration (geotextile) separated by drainage (gravel).

Green roof with gazebo

Plants. For green roofs, a limited selection of plants is intended. During operation, it should be ensured that accidentally introduced plants do not germinate, which can damage the structure.

For the roof of a house where a green zone is planned, TN-Roofing Standard Green (with standard arrangement layers) and TN-Roof Barrier Green (inversion). In both systems, a layer of waterproofing made of a polymer membrane is provided.

Video description

About the installation of a green roof in the following video:

Features of mounting flat systems

TechnoNIKOL flat roof nodes are the most vulnerable areas, in which problems are most often detected during operation and the likelihood of leakage is highest. All of them require a careful approach when installing hydro and thermal insulation; as a rule, they are sealed. The nodes (that is, the junctions) include the following sections:

Roof junctions to parapet and roof corners. In these nodes, an overlap of waterproofing is created on the side surface.

To the elements drainage system . Regular accumulation of water is detrimental and unacceptable for any flat roof, therefore important point arrangement is the organization of water flow. To do this, a minimum slope is created that directs the runoff to the drain funnel. The funnel assembly is reinforced with an additional layer of waterproofing and the installation of a metal apron.

To pipe outlets(chimneys, ventilation shafts). The nodes of the TechnoNIKOL roof at the exit points of the pipes are also provided with double waterproofing, which is removed above the last (top) layer of the roofing pie.

Mounting the junction

Conclusion

Country houses with an exploited roof are different modern look and original design. Installation of TechnoNIKOL systems is carried out on the basis of individual project and node development. With technically competent installation and the use of all provided layers, a guarantee is issued for the waterproofness of roofing materials. In addition to a high-quality and durable roof, the owners get the main advantage - the ability to use the empty area at their discretion.

TM STN - products of the Company "Trading Network TechnoNIKOL".

We work every day with a large number customers, listen to their opinions, wishes and always strive to meet their needs. A thorough analysis of the preferences of our customers and partners has shown that in the building materials market, as in any industry, there is a need for quality products at attractive prices. That is why in 2015 the company began to develop the direction of its own brand - STN. Customers can buy products of the already well-known brand in Moscow and other cities of Russia at a relatively low cost.

Based on the most common customer requests, we have identified the main categories of building materials in demand. At the moment, mastics, primers, protective films and membranes. But we are not going to stop there. Own trade marks should not only reduce the material costs of our customers, but also become a worthy product on the market.

Saving

While maintaining the high quality of our products, we keep prices down. Our customers can afford to build and renovate without compromising their budget and wallet.

Quality

We are attentive to the quality of our products and carefully control the production at all stages. All samples are checked for compliance with the requirements of GOST. STN brand products have all the necessary certificates and meet international requirements.

Optimal choice

We are chosen due to our loyal pricing policy and guaranteed product quality. Products of our brand have been repeatedly used and used in many industrial and private construction projects.

You can send your wishes / comments on the goods to us by mail: .

Mastics and primers:

Primer bituminous STN Professional

Primer CTH Professional is a solution of bitumen and organic solvents. It is used for the preparation of cement-sand and reinforced concrete bases. The primer dries completely in 12 hours and has good hiding power, easy to apply to the surface.

Mastic bituminous STN Professional

Mastic consists of a mixture of petroleum bitumen with the addition of a solvent and special technological fillers. She does not require pre-training(heating) and immediately ready for use. Mastic STN Professional is used when performing waterproofing works on wooden, metal, reinforced concrete and cement-sand bases. The mixture is easy to apply, dries quickly and is resistant to temperature extremes and humidity.

Bitumen-polymer mastic STN Professional

This mastic consists of a bituminous binder, artificial rubber, solvent, and special fillers. It is designed for waterproofing foundations and devices mastic roofs. Also, the composition is used to repair waterproofing coatings. Elastic and heat-resistant bitumen-polymer mastic is well applied to the base and has good adhesion (adhesion of the material to the surface) to cement-sand surfaces.

Corporation "TECHNONICOL" in Russia manufactures and supplies a wide range of sound and heat insulation, mastics, roofing and waterproofing.

Our range includes dozens of positions and allows us to carry out the installation of roofs and waterproofing of the highest quality. At the same time, all products comply with the most high requirements and has the necessary certificates.

Roll materials "TECHNONICOL"

As part of this direction, we carry out the production and supply of bitumen and bitumen-polymer products for soundproofing buildings and waterproofing buildings and structures

For thermal insulation of buildings

The company offers stone wool, extruded polystyrene foam, fire protection systems and much more. All products are manufactured on modern equipment using the latest technologies and meets all existing quality standards.

For pitched roofing

As part of this direction, the company "Trading Network TechnoNIKOL" provides roofing and waterproofing products with a guarantee of high reliability and durability. The assortment of the company includes bituminous and composite roof tiles wide color gamut.

Mastics, primers, bitumens

Our company produces mastics used in solving various repair issues. In addition, with their help, the installation and waterproofing of the roof is carried out. Among them are mastics of cold and hot application, bitumen and bitumen emulsions, various compositions for road construction, for installation and waterproofing of roofs, primers for priming bases.

Accessories

The company manufactures and supplies a huge range of components for the device flat roofs- aerators for roofs, funnels for drains and accessories, as well as different kind professional equipment for roofing works.

For facade cladding

A new direction - facade tiles for cladding, renovation and decorative design facade, his architectural elements(gable, entry group), fences and railings. The product is characterized by increased tightness, resistance to corrosion and temperature fluctuations, and also has exceptional material and color durability. In addition, the price per m2 facade tiles is relatively low.