Crafts from large plastic. Crafts from plastic bottles with your own hands: the best ideas for handmade. Vertical garden with horizontal bottles

Plastic bottles are an affordable and inexpensive material that, in addition to its direct purpose, can be used to decorate a personal plot. From plastic, you can create a lot of decorative and practical elements landscape design, which will be original, strong and durable.

The main task of craftsmen and amateurs to build crafts from improvised means is to collect as much as possible more bottles different sizes and colors, show imagination and bring it to life.

Recycling bottles: functionality and decorativeness of plastic products

During holiday season many summer residents accumulate a lot of empty plastic bottles left over from picnics. You can send them to a landfill, or you can use them to change the surrounding space and make unusual accessories to decorate the garden.

Recycling plastic bottles for home improvement garden plot has a number of advantages:

  • saving money that would have to be spent on the purchase of finished design products;
  • exclusivity and originality of the created crafts;
  • changing landscape design in the shortest possible time - working with plastic bottles is very simple and usually it takes from 2 hours to 2 days to make a simple craft;
  • the opportunity to show their design abilities - the finished product will emphasize the creativity and creative potential of the owner of the plot;
  • bottle reuse reduces clogging environment, because, as you know, it will take many years for the complete decomposition of plastic in natural conditions.

On a global scale, an abundance of plastic has been adapted for the construction of floating islands, residential buildings, energy-saving systems and large installations.

On a local scale suburban area plastic bottles have found their application in the creation of:

  • flowerbeds and flower beds;
  • flowerpots and planters;
  • garden gazebos;
  • canopies and hedges;
  • ornaments for a garden and reservoirs;
  • country furniture;
  • lampshades for lamps;
  • garden paths;
  • figurines of animals for playgrounds.

There are many ways to use waste packaging. Consider the most interesting ideas reincarnations and describe the process of creating DIY crafts from plastic bottles.

Crafts from plastic bottles - original elements of landscape design

creation of flower beds and flower beds

Plastic bottles can be used as a low fence for a flower bed or container in which flowers and garden plants will grow.

For fencing flower beds, the same 1.5-liter bottles are better suited. To give brightness to the landscape, it is advisable to paint the plastic container in yellow, red or blue color(green - not recommended, as it will be "lost" against the general background of plants).

Work order:

  1. It is necessary to determine and outline the contours of the future flower bed (they can have the most intricate configuration).
  2. To ensure the strength and stability of the structure, plastic bottles must be filled with sand or earth.
  3. Dig a row of bottles along the perimeter of the flower bed so that there are no gaps between the elements of the fence.

As a result of the work done, a well-groomed and tidy flower bed will turn out.

From big plastic bottles get an excellent flowerpot or flowerpot, the main thing in the manufacture is not to forget to make drainage holes in the bottom.

Let's consider step by step the creation of a hedgehog flowerbed, in which you can plant the most different plants: cacti, tall lawn grass, perennial dwarf shrubs And so on.

  1. As a basis, you need to use a 2 or 3 liter plastic bottle. It is cut in half lengthwise. Wrap the front of the container nylon pantyhose or burlap - this will be the muzzle of a hedgehog.
  2. The fabric is glued or stapled together. From black buttons and a black piece of fabric, you need to make eyes and a nose of a hedgehog, and then sew them to the base.
  3. Make holes for drainage at the bottom of an impromptu flower bed, fill it with earth and plant plants (it is desirable that the shape of the leaves resemble needles).

The result of such creativity will undoubtedly please all visitors to the garden plot, especially children.

The original decoration of the garden will be an "all-season" flower bed, lined with multi-colored plastic bottles.

After placing all the bottles, as shown in the diagram, the flower bed must be given clarity and stones laid out along its contour.

Hanging planters from bottles can be placed near the house, gazebos or throughout the garden.

decorations for artificial reservoirs

The surface of the pond can be decorated with homemade water lilies or non-trivial daisies. Flowers from plastic bottles will add picturesqueness to the pond and attract attention beautiful butterflies and dragonflies.

To create water lilies you will need:

  • white plastic bottles yellow color small capacity (1-1.5 liters);
  • plastic bottle of 5 liters;
  • candle;
  • scissors;
  • green paint;
  • glue.

Working process:

  1. From the yellow bottle you need to cut off the neck - this will be the core of the water lily. Make 8 cuts in the neck at the same distance from each other and give each part a rounded shape.
  2. For the manufacture of stamens, we use the rest of the bottle. We cut a strip about 4 cm wide and across, up to half, we make cuts every 0.5 cm.
  3. We turn the blank of stamens and bring it to the flame of a candle (the distance to the fire is about 5 cm). The stamens should curl inward.
  4. We also hold the core over the fire, so that the petals are slightly bent.
  5. We glue the stamens and the core.
  6. From a white bottle we cut out oblong petals of a water lily and fasten them with glue to the neck of a flower.
  7. From the bottom big bottle cut out a leaf for a water lily and color it green.
  8. The flower must be "planted" on a leaf and sent to sail through the pond.

Daisies from plastic bottles will help decorate both the pond itself and the area around it.

You can make a palm tree from plastic bottles and place it near the pond - this will add exotic landscape design.

Bottles with a cut bottom (dark color) are exposed and pressed tightly against each other. The number of bottles used determines the height of the palm tree. A neck from a green bottle is attached to the top of the palm tree, through which five wires (the bases of palm leaves) are made.

Green bottles are strung through the neck on a wire. Green plastic is cut into strips, imitating palm leaves.

Around the pond, you can seat funny frogs that will enliven the landscape of the site and cheer up the guests of the garden.

plastic bottle garden paths

An interesting solution is garden paths for giving from a plastic bottle. Paths can be laid out from whole bottles filled with sand, or from their bottoms.

Bottom paths look neater, but it will take a little more time to create them:


decorative figurines and installations

A modern and popular trend in garden landscape design is the creation of voluminous installations and small decorative figurines from scrap materials, including plastic bottles.

On the branches berry bushes, on fruit trees or in a flower garden, you can "settle" bright bees from plastic bottles. Such a decoration is impossible better fit suburban area on which the apiary is located.

To make one bee you will need:

  • 1 liter bottle with a wide neck;
  • 2 ribbed bottles;
  • wire;
  • 2 white lids;
  • scissors and glue;
  • paints (gouache) and varnish;
  • napkins;
  • a piece of black wire.

Work sequence:

  1. Paste the base of the product (bottle) with napkins, dry it and paint it with gouache in yellow-black color. Open the surface of the craft with varnish - this will save the “bee” from dampness.
  2. Cut out 4 wings from the ribbed base, shaped like leaves.
  3. We form a bee stigma. We glue the eyes (small white covers) and the mouth (a piece of black wire).
  4. We attach the wings to the base, and draw pupils on the eyes.
  5. We make paws from wire, there should be three pairs of them. We fasten the paws to the bottom of the base (under the wings).

You can make a bee swarm using bottles of different sizes.

More time and materials will be required to create a three-dimensional installation in the form of different animals. You need to be patient, because you need to lay out whole containers or parts cut out of them according to a certain pattern.

The playground for children can be decorated with funny animals made of plastic bottles. Such figurines are easy to make and can be made together with the child.

uses for plastic bottle caps

Corks from plastic bottles are also used as landscape design decor.

The most interesting options for using lids:


To create a composition you will have to stock up large quantity covers of different colors, so you need to plan a future craft in advance so that there is time to search for material.

Practical use of plastic bottles

country house and garden gazebo

On a small summer cottage, you can build a house or garden gazebo using ordinary plastic bottles filled with sand instead of bricks.

The walls of arbors, greenhouses and houses are laid out in a checkerboard pattern using cement mortar. When working, you need to take into account some of the nuances:

  • plastic does not come into contact with cement mortar, like a brick, so holes must be made in the container - the cement will interact with the sand inside the bottle;
  • to improve the adhesion of the surface of the bottle with the solution, it is desirable to lay a reinforcing grid between the rows of masonry;
  • in the process of laying, the rows of bottles must be fixed with a rope or wire so that they do not move apart.


Under the influence of frost and heat, plastic is destroyed, so the life of bottle structures is small - about 5-10 years

Garden furniture

Plastic containers are a unique material for creating practical country furniture. You can independently produce traditional or exclusive, avant-garde furniture models.

Plastic bottles can be quickly and easily turned into a neat and comfortable ottoman for the garden.


  1. Empty open bottles should be kept in the cold (in the summer you can put them in the freezer for a while). Even in the cold, close the bottles and bring them into the heat - the air inside the eggplants will heat up, expand and prevent the container from deforming during operation.
  2. Connect the bottles with double-sided tape. First in pairs, and then - in the overall composition.
  3. According to the shape of the seat of the ottoman, we cut out thick cardboard and foam rubber, glue it together.
  4. Wrap the ottoman around the perimeter with foam rubber or batting, and attach a soft seat on top.
  5. Sew a cover for an ottoman: cut out the top (circle or square) and a rectangle (the walls of the ottoman) from the fabric, sew together, leaving room for insertion.
  6. Attach the design and sew the cover by hand.

An ottoman made of plastic bottles turns out to be very light and practical, it can be placed in the garden, gazebo or in a country house.

fences and canopies from plastic bottles

You can save a lot on arranging a fence or a carport if you make a structure out of plastic bottles.

The finished canopy will have a plastic structure and an unusual configuration, it will create a protective barrier from the sun and precipitation, and also decorate the garden.

To retain the sun's rays, the bottom of plastic bottles must be painted

  1. In a plastic container with a red-hot rod, it is necessary to make through holes and thread a fishing line or rope through them. Form several rows in this way.
  2. Between themselves, the rows are connected by perpendicular ties through another pair of holes and material for “firmware” (fishing line, rope, wire).
  3. The "bottle" canopy is attached to a metal or wooden frame.

A wave-like effect can be obtained by attaching a canopy to racks of different lengths.

useful recycled crafts

If the question "What to do with plastic bottles?" remained unresolved, we suggest that you familiarize yourself with useful crafts that will come in handy on any personal plot.


Do not be afraid to experiment and go beyond the usual, and then the most ordinary things will turn into a real work of art.

It would seem - how can you use the empty plastic bottles that we constantly encounter in everyday life? Yes, they are very different - large and small, from carbonated and drinking water, from ketchup, sauces, mustard, shampoo, cream ...

Most of us throw plastic bottles in the trash without regret. But, it turns out, absolutely in vain! Even such, at first glance, useless things can be very good use:

  • Crafts from plastic bottles for a garden, a summer residence and a kitchen garden;
  • Ideas for a balcony;
  • Children's crafts and toys from plastic bottles;

    • Animals from plastic bottles

  • Flowers from plastic bottles;
  • Useful for home;
  • New Year ideas;
  • Bird feeders;
  • Drinking bowls from plastic bottles;
  • Consider what can be made from caps and corks from plastic bottles;
  • Flashlights

So, let's look at all the points and find out what crafts from plastic bottles can be made using a little imagination.

Children's crafts and toys from plastic bottles

Of course! Toys and more toys. Pigs, cows, cats, lions, penguins. Just look carefully at the bottle: what does its shape remind you of? Take up paints, brushes and spend time with joy and pleasure!

For inspiration, here are examples of what toys can be made from plastic bottles of various shapes:

Creative French have created a whole world of robots from plastic bottles and caps!

The best children's books

A whole detailed step-by-step instruction on how to make an airplane from a plastic bottle

Show me one boy who refuses such a jetpack made of plastic bottles!

But a great toy for the bathroom is boats made from shampoo bottles.

Such a colorful and cheerful elephant will help to diversify the interior of the children's room and simply delight your children:

If the children are afraid of the dark, make a funny night light for them and with them.

Idea source: fab

Or such "fireflies".

You can also make bright and funny rattles for the little ones out of plastic.

And these are the "foam blowers" for older children - in the summer on the street they will be very popular with the kids.

It turns out that not only toys, but even a whole game can be made from plastic bottles! For example, how do you like this bowling alley?

And, of course, you can make a traditional piggy bank very simply! True, it will be difficult to break it. 🙂

Animals from plastic bottles, birds

The main thing is to guess the animal hiding there in each shape of the bottle!

Look what a cute jellyfish made from a plastic bottle for decorating a desk room!

Magic Video Master Class on Making a Turtle

Funny birds from plastic bottles.

Charming princess frog

Christmas crafts from plastic bottles

Christmas tree from plastic bottles

It turns out that a Christmas tree (for example, a tabletop one) and even a Christmas tree can be made from plastic bottles. Links to master classes are under each Christmas tree.

And in this video the girl does high Christmas tree with a star on top!


And one more video Master Class for making New Year's beauty

New Year's toys from plastic bottles

We need New Year's toys during the holidays in order to decorate the Christmas tree or the whole room. Here are some ideas to help you make unexpected and fun christmas toys and decorations from almost nothing - from plastic bottles and a minimum of improvised means.

The Christmas tree can be dressed up with the help of such original balls (these balls are based on rings cut from a plastic bottle, and you can come up with any decor):

You can make simple Christmas decorations with your own hands - and depending on how you decorate them or what you fill them with, you can get many options:

If your Christmas tree is large, you can make golden bells for it:

And you can - bumps from brown plastic bottles:

Christmas decorations for the house from plastic bottles

Snowflakes of various types look especially good if it is possible to paint them with gold paint:

Such a ball can become a decoration of a room, and several balls suspended at the entrance to the house will create an unforgettable festive atmosphere:

Making Christmas candlesticks from plastic bottles is very, very simple:

Useful crafts from plastic bottles for the home

Comfortable pouf for the living room

Step-by-step instructions for making a charming cat pot

We all know how delicious cupcakes are and how difficult it is sometimes to bring them to your guests without spoiling all the beauty. Ordinary cake boxes are too big for them, and for some reason no one has come up with mini-boxes yet. So make them yourself! All you need is a plastic bottle, cardboard and colored tape.

By the way, you can pack macaroons in the same way!

Here are some more ideas for creating a variety of containers from plastic bottles for storing various items:

Source of idea and MK: duitang

We do not know how for you, but for us always a big problem find a place for a charging phone. With the help of a bottle of shower gel, you can easily solve this issue. Just cut out a holder from it, which will fit both the phone itself and the charging cable. And you can decorate it with the help of fabric or napkins using decoupage technique.

Plastic bottles will help even for unusual design napkin rings. We offer step-by-step instructions for manufacturing.





Bird feeders from plastic bottles

Maybe the bird feeder isn't the best creative craft, but very useful for our smaller brothers, and it also deserves attention, especially with the approach of spring.

Make two through holes in the bottle, insert a wooden culinary spatula. And, of course, do not forget to pour the grains!

Crafts from plastic bottles for the garden, vegetable garden and cottages

Now let's see how plastic bottles can help us grow flowers and other plants.

This idea will save a lot of space, because the previously empty wall is used to place these bottle-pots.


Perhaps the simplest, but such an important craft is a watering can for home or garden plants! It doesn’t matter if you are preparing to grow seedlings for the garden at home, or if you just have fragrant herbs growing in pots - such a watering can can be very useful.

And you can make it with just a bottle, a match and a thick needle!

Entertainment with water in the form of a whole system of iridescent vessels is ideal for summer time with children in the garden and in the country.

And who needs fly agarics from plastic bottles?

Or a whole bunch of daisies!

Decorations from plastic bottles

The imagination of designers is amazing! You look and do not believe your eyes that such beautiful things are created from ordinary plastic bottles!

You can create jewelry for girls:

Step by step instructions on how to make a very delicate bracelet

It would seem that a plastic bottle is such an ordinary thing, but once it was worth its weight in gold - our grandparents carefully folded precious containers on the balcony to use instead of a milk can or a jar for storing compote. Now PVC bottles- a dime a dozen, so humanity thought about it, because soon, because of plastic containers, there will be nowhere to step. How to adapt all this abundance of plastic for the benefit of the business? The most amazing ideas using the cost of food and chemical industry- these are floating islands and huge installations, residential buildings and energy-saving systems created from a lot of unnecessary plastic containers. We invite you to join the global plastic bottle boom. Rate original crafts for a garden from used packaging, which we offer you as an ideological basis for further creativity on the way to creating an amazing and unusual country design.

The burning problem of all summer residents is the laying of a house and ancillary buildings on a garden plot in a small area of ​​​​land allotment and limited funds. In addition, the seasonal purpose of the dacha does not imply the construction of capital buildings "for centuries."

So, the enterprising people decided to adapt a prosaic plastic bottle as a building material. The walls of houses, gazebos, greenhouses, and other garden structures are laid out traditionally - in a checkerboard pattern using cement mortar, but instead of bricks, unnecessary plastic containers filled with sand are used.

To maintain this not quite familiar eco-style, you can make a variety of crafts from bottles for the garden so that the design of the site is decided in a unified way. Let's take a closer look at how you can make your life easier and more comfortable with the help of PVC containers.

Country house

Despite the seeming simplicity of building a building from plastic containers, there are some nuances that you need to consider if you decide to build a country house with my own hands. Here are a couple of helpful tips:

  • Lay a reinforcing mesh between the rows of masonry - the adhesion of the solution to the surface of the bottle will improve.
  • Do not forget that plastic does not come into contact with cement, like brick, so make small holes in the container - this way the mortar will begin to interact with the sand inside the bottle and the wall will become stronger.
  • During masonry works fix the bottles with a rope or wire so that the rows do not disperse.

Keep in mind that plastic tends to break down under the influence of frost and heat, especially from temperature changes, so be prepared that after some time - 5-10 years, the walls of the building will begin to “countdown”.

Using PVC bottles as a building material, you can build an economy house in the country

The cylindrical shape of plastic bottles allows you to build houses and gazebos, round in plan

In addition to the supporting structure of a house made of plastic containers, this versatile building material, as it turned out, can be used for roofing works. We offer you two options for a roof made of used PVC containers:

  1. Plastic tiles. To make this simple roofing compress plastic bottles. If this process is carried out without light heating of the plastic, then the containers will simply crack, so the easiest way is to put the raw material in the sun and then flatten the containers. Installation of PVC modules is carried out with conventional self-tapping screws to the frame with laying the material in several layers. From such tiles, you can easily form a cone-shaped roof for a gazebo or bath.
  2. Plastic slate. It is easy enough to make something like a slate roof covering from the cylindrical part of a plastic bottle. To do this, it is necessary to cut off the bottom and neck from the container, cut the middle part of the container along and in half, connect the resulting PVC elements glue, forming a wavy surface.

If you decide to build a house of wood, brick, or there is already a residential building in your summer cottage, pick up a plastic bottle, show your imagination - decorate the facade with an unusual decor made of plastic stoppers. Complex geometric patterns, floral patterns or slightly naive "cartoon" animals - choose for yourself any style that suits your spirit.

From plastic bottles it is quite affordable to make a roof for a summer residence - either in the form of tiles, or in the likeness of slate

Bright plastic lids from used containers will give the facade country house expressive coloring

Decor from bottle caps for the facade country house give the building a personality

Gazebos, greenhouses, pergolas

Most rational use plastic bottles for the garden are not only crafts designed to decorate it, but also more significant things, such as greenhouses or. Why buy expensive polycarbonate for building a greenhouse if the PVC from which the container is made is practically the same material?

Why equip the greenhouse with even more expensive glass than laminate if there are unnecessary bottles? By refracting the sun's rays, PVC packaging performs the same tasks as glass with polycarbonate, moreover, it is the most economical option for building a greenhouse that you can find.

An economical option for arranging a gazebo or greenhouse in the country - building from plastic bottles

If you are bored with the traditional rectangular gazebo, make it in the form of a hemisphere using a metal frame and plastic bottles

Having built a frame of wood or metal, arm yourself with a red-hot knitting needle, a drill or a hammer with nails. In one of the ways, make holes in the bottom and cork of a plastic bottle and put plastic vessels on a fishing line or wire, the length of which will be slightly more than the height of the building. Stretch the resulting elements and fix them on the crossbars of the frame - this is how you will form the walls of the greenhouse or gazebo. Additionally, you can fix the vertical modules in the transverse direction by tying the bottles within one row with wire. Using containers of different colors, try to create some kind of ornament - this is how you diversify the colorless mass of walls made of transparent plastic.

What else can be built from plastic bottles for the garden? The most easily erected version of a small architectural form from plastic bottles in the garden is a lightweight gazebo - which usually serves as a frame for climbing plants. However, despite the fact that in spring and summer the structure of the pergola will be hidden by weaving roses or ivy, in winter its frame will be exposed and will not look very good. To avoid similar phenomenon, you can ennoble the design of the pergola with plastic bottles natural shade- brown or green. The brownish colors of PVC vaguely resemble wood, and the grassy ones will enliven the appearance of the garden in the cold season.

Fences, railings, gates

A lot of money can be saved if you use plastic bottles to equip the fence of the garden plot. Using the same principle that was described in the construction of the gazebo, instead of corrugated board, chain-link mesh or polycarbonate, use plastic containers to fill the space between the fence posts.

A little creativity and diligence - the border of your garden will become not only impassable, but also extravagant, attracting attention. If the fence has already been erected before, a new sound will be given to it by a floral decor made of plastic bottles - the most natural option for a garden.

In support of summer cottages from plastic bottles, build a fence using the same containers for the integrity of landscape design

Multi-colored flowers cut out of plastic bottles will refresh and decorate an old fence or country house

carport

The eternal problem of car owners is the allocation of space for land plot for parking a car or several Vehicle- Bicycles, scooters or ATVs. Not always the project of a compact private or country house involves a room for a car, so it becomes necessary to build a detached garage or shed. The construction of these structures is expensive and many cannot afford, so the car is standing under the scorching sun, open to winds, rain and snow. Ordinary plastic bottles come to the rescue in this situation - junk, useless containers that allow you to experiment without fear, without fear of spoiling the building material. If something does not work out and the bottle becomes unusable, you can always take another one and not lose a penny.

Also, material on parking options for a car in the country will be useful:

A canopy for a car made of plastic bottles will not only fulfill its immediate function, but will also bring an original accent to the country landscape

So, from plastic bottles you can form a plastic structure, unusual in its configuration and performing several functions at once - it will create a protective plane from precipitation, the sun and, at the same time, decorate your garden. There is nothing difficult in forming a canopy from bottles - it can very well be done by hand.

First, you need to make through holes in plastic containers, or rather, it is best to burn them with a red-hot rod, and then put the bottles on a fishing line, rope or wire, connecting them in rows. Between themselves, the sequences of bottles are fastened with perpendicular bonds by means of another pair of holes and the previously selected material for “firmware”. Thus, a movable surface is obtained, resembling a “bottle cloth”, which remains to be attached to a metal or wooden frame using hangers of different lengths to create a wave-like effect.

It is important to know! Considering that a plastic bottle is a kind of lens that refracts light like glass, it is advisable to paint over the bottom of the container to block direct sunlight.

Useful devices for the garden

solar collector

Surely you have come across the fact that there is no central water supply in the country house, you did not manage to get a boiler, and after have a hard day garden care so eager to take no ice shower and wash warm water. We suggest you try to make a summer shower for your site with energy saving system- solar collector made of PVC bottles. The principle of operation of such water heating is based on the so-called "thermosyphon" - a denser hot water moves up, less dense cold - down. The developer of the system, a Brazilian engineer who received a patent for the invention, claims that 1 m 2 of the solar panel will be enough to bathe 1 person.

From plastic bottles you can assemble a solar panel and forget what it is ice water in the summer shower

Cold water coming from the tank to the solar collector is returned already heated

Consumables and tools for making a collector from plastic bottles:

  1. 2-liter plastic bottles - 60 pcs.;
  2. 1-liter milk bags - 50 pcs.;
  3. PVC pipe 100 mm - 70 cm;
  4. PVC pipe 20 mm - 11.7 m;
  5. PVC corner 20 mm - 4 pcs.;
  6. Tee 20 mm PVC - 20 pcs.;
  7. Plugs 20 mm PVC - 2 pcs.;
  8. PVC glue;
  9. Black matte paint;
  10. Brush;
  11. Emery;
  12. Scotch;
  13. Rubber mallet, wood jigsaw.

Plastic bottles need to cut off the bottom and insert one into the other. 100mm PVC pipes used to form a rectangular frame of the solar panel, 20 mm pipes are cut into segments of 10x1 m and 20x8.5 cm and assembled into a single structure using tees. One meter long pipes and milk bags are painted with black paint, which are placed under the bottles to improve heat absorption.

Solar panels from plastic bottles should be located at least 30 cm below storage tank with water on south side walls or roofs. To optimize heat absorption, the panels must be installed at an angle which is calculated as follows: to your geographical latitude add 10°. It is recommended to replace plastic bottles in panels with new ones every 5 years, as after a while the plastic becomes opaque, and this reduces its thermal conductivity.

Another energy-saving idea "sailed" to us from hot Brazil called "1 liter of light." The essence of this engineering thought in terms of how to illuminate a room without windows on a sunny day is striking in its simplicity - it is enough to hermetically integrate a plastic bottle into the roof - but not empty, but with water. It is water, refracting the rays of the sun, that will fill the room without natural light bright light.

By pouring water into a plastic bottle and crashing it into the roof of the house, you will always have a bright source of light in rooms without natural light.

Growing and watering plants

Plastic bottles will be useful in the garden not only for buildings or decor, but also directly in growing plants, flowers and vegetables. By cutting a hole in the container and filling it with earth, you can use a plastic container for growing seedlings. Just don't forget to drill holes in your new pots for drainage and take care of water drainage.

Glue corks to a plastic bottle - you will get funny little men instead of boring pots for growing seedlings

Pots for growing plants can be given a little color by painting them with stained glass paints or decorating with bottle caps. If your dacha is small in size - try to create vertical gardening- hang plastic pots from bottles on a fishing line under the wall. So you decorate a deaf, inexpressive plane and save space.

To create pots for seedlings and flowers, not only plastic bottles from drinks are suitable, but also multi-colored containers left after use household chemicals

Make multiple holes in a plastic bottle - this will allow you to get a device for drip irrigation

PVC bottles also come in handy in the process of watering the garden, if you poke miniature holes in the bottom of the bottle and attach the container to the hose, you will have a good tool for drip irrigation. Equipping a home-grown bottle water sprayer with wheels from an old baby car or stroller, you can move the watering machine around the garden.

Garden and home furniture

A lot of trouble for summer residents is the care of furniture in the garden house and on the street - the constant proximity to the ground negatively affects appearance sofas, beds and armchairs. Having built country furniture made of plastic bottles, you will forget about what a sloppy upholstery is, which is so hard to put in order outside the city, away from the services and dry cleaners. The containers and corks themselves are a unique material for the production of furniture with your own hands - durable and easy to clean.

From plastic bottles you can assemble quite practical furniture for the garden and at home.

Chairs and a table for summer cottages made of plastic corks are an economical solution for outdoor furniture

A convenient ottoman for giving will turn out from unnecessary plastic containers wrapped with foam and covered with upholstery fabric

A couple of dozen plastic bottles, a metal frame - and a comfortable chair for the garden and cottage in front of you

garden lamps

Lighting fixtures for the garden plot is another expense column that gardeners often ignore. With a plastic bottle, the lighting problem is solved in a minute. Take a colored canister from household chemicals, cut off the neck and fill the cartridge with a light bulb inside - the dacha lamp is ready. Create a more complex ceiling configuration by deforming plastic bottles by heating, melting the edges and painting in various colors. Original lamps made of PVC containers will perfectly replace industrial analogues, as well as decorate your home and garden.

To create original design lamps for giving, it is enough to paint them with stained glass paints or deform them a little

From plastic bottles you can get unusual street lamps for giving - both electric lamps and candles serve as a light source in them

Landscape decor from plastic bottles

When creating garden decorations from plastic bottles, everything is used - the whole container, the bottom and neck, the middle part and cut out fragments, and corks are especially popular. They make a very expressive decor for the garden - paths and decoration of empty planes of the house or fence. Another unforgettable decoration of the site can be installations made of PVC containers - three-dimensional and planar figures of animals and plants. Flowerbeds and borders that limit the planting of different types of flowers can be successfully made from the same plastic container. And so that your ears are always delighted with the singing of birds, hang feeders and drinkers for birds made with your own hands from PVC bottles on the trees.

Multi-colored corks from plastic bottles serve as an excellent material for creating planar compositions in a country landscape

Examples of flower beds

Without a doubt, the main decoration of a summer cottage is flowers formed into flower beds or growing in a picturesque mess. A special "cut" to the flower bed is given by low borders, outlining its shape and giving flower arrangement completeness.

In the absence of stone or brick, traditionally used to form a border, bury plastic bottles upside down along the border of the flower bed - you will get a simple fence for flower planting. good decision for the shady areas of the garden plot, where nothing wants to grow - original flower beds from PVC containers, various in shape and color.

Arrange with the help of a flower bed made of plastic bottles shady or swampy areas of the garden

A small flower bed in the form of a ladybug looks bright and unusual

Green plastic bottles are perfect for forming a border for a flower bed

garden paths

The issue of laying garden paths is always difficult - and the soil needs to be strengthened, and decorative material buy - as a result, a considerable amount is obtained. And you don't want to walk in the mud. While you are accumulating cash and are looking at the pavement for the tracks, we offer you a temporary option for arranging them with minimal cost. Fill the paths in the country thin layer cement mortar and immerse plastic bottle caps in it - due to the corrugation along the side plane, they will be well fixed in the building mixture.

A prosaic cement walkway can be turned into a picturesque mural thanks to multi-coloured plastic covers

Decorative installations

Quite a popular decorating trend garden landscape- creation of three-dimensional installations from various improvised materials, including plastic containers. However, here you need not just some skill and patience, because you need to lay out either whole containers or parts cut out of them according to a certain pattern.

The most expressive decor for a garden landscape is voluminous installations from plastic bottles

We suggest you make a not very complicated installation of plastic bottles in the form of a Christmas tree in the country. Although New Year still far away, as they say, prepare a sleigh in the summer - think about it in advance. Of course, the Christmas tree is the main attribute of the winter holiday, without which it is impossible to create a truly upbeat, New Year's atmosphere. What if your site does not have coniferous trees, and you do not welcome the traditional logging on the eve of the New Year? An excellent solution in its simplicity and environmental friendliness is the creation of a Christmas tree from plastic bottles.

The basis of such a composition is a rigid rod, to which the bottles can be hung or put on a wire and wrapped around, create tiers from circles, tie or install auxiliary supports and form a tent tree shape.

It is not necessary to make a Christmas tree from standard green plastic bottles - it can be assembled from containers in any shade

Whole plastic bottles, and bottoms, and chopped parts of the container will be used. The bottles themselves can be deformed, melted, painted in unusual colors- in general, there is where to roam fantasy and ingenuity. Do not discount bottle caps either - they will make unusual garlands and miniature decor.

By the way, the Christmas tree does not have to be hidden or dismantled for the summer season - if you choose a cone-shaped tree, then the internal space of the structure will serve you on hot days as a gazebo or become a place for children's games. From used green sprite bottles, you can make a miniature Christmas tree for the house, you just need to cut the curved planes of plastic containers with “noodles” and stick them on the base.

Bird feeders and nests

One of the types garden decor, combining many functions - feeders, nests and drinkers for birds. A feeder made with love will decorate the garden and attract birds - they will repay you for your kindness with cheerful chirping, destroying garden pests at the same time.

Bird nests and feeders will be a useful decoration for your garden

Decor for a country interior

In addition to garden decor, a plastic bottle is good for creating an extravagant interior design for a country house. Bright panels for walls and furniture, partitions and screens, even curtains - you can do all this yourself from PVC containers. Such decorations for the home look quite original and original, at least you won’t see anything similar in anyone else’s. Putting your soul into decorating a country house, you will enjoy both the creative process and the results of your imagination, combined with skill.

Cutting the bottoms of transparent plastic bottles and connecting them thin wire, you will receive air screens for dividing the space of a country house

rainbow curtain for front door assembled from ordinary bottle caps and looks very original.

Coloring the interior of a country house in all shades of the rainbow will help you plastic lids from bottles

Entertainment, recreation, games in the country

Playgrounds

Playgrounds on the land are not only a pleasant thing for organizing leisure time, they are also a certain element of garden decor. Bright swings and slides, mini-golf courses and fabulous houses will create a pleasant atmosphere for a child to stay in the country.

Plastic bottles will help separate the area for children's games, and will also serve as the basis for creating interesting toys.

Equip a field for playing croquet in your country house, and make gates from plastic bottles

Boats and watercraft

Surely there is a river or a lake near your garden plot. If so, then your vacation on the shore of the reservoir will become more exciting if you have a means of transportation on the water. Getting to a deserted island, going on a boat trip or fishing - nothing is easier when there is a boat. You can easily build this simple transport from plastic bottles.

A narrow boat similar to an Indian pirogue with a capacity of 1-2 people or a larger boat for 3-4 passengers - there are a lot of options. The simplest watercraft is a rectangular raft, from which it is convenient to fish, having sailed a little from the shore.

From plastic bottles you get a boat or raft that is quite stable on the water.

To make a boat in the form of a kayak, cut the bottom of the bottles, thread one into the other one after the other and form something like long tubes. Glue the joints with furniture tape - it is wide and will not peel off when in contact with water. From separate tubes, connecting them together, glue the sides and bottom of the boat with the same adhesive tape to get a wedge-shaped shape. Here it is important to correctly calculate the ratio of the width of the vessel and its height - test launches and a little engineering will help you to turn a mountain of unnecessary containers into a useful thing.

A non-trivial approach to decorating a pond in the country - delicate bottled daisies on the surface of the water

More complex structure at the boat for the whole family, which involves the connection of vertically standing bottles in two rows and additional sealing of the ship's hull with bags. Nothing prevents you from installing a motor on the boat, which will significantly improve its driving performance and range. So, using the unsinkable properties of plastic bottles, from which, by the way, entire islands are built in Japan and Taiwan, you can surf the surrounding water bodies with breeze and comfort.

Haven't you embraced the idea of ​​a plastic boom yet? Do something extraordinary for your garden and you will not have time to look back, as you will immediately join the ranks of admirers of a plastic bottle.

1. Furniture

Some of the designs are just amazing! Take, for example, beds made entirely of plastic. But something less complex and large-scale, for example, an ottoman, you can create yourself. To do this, you will need: plastic bottles, adhesive tape, fabric for the cover and yarn or ribbon with fringe for finishing, cardboard, padding polyester in rolls.

Glue the bottles with adhesive tape so that you get a round frame for the pouffe. Make sure that all the bottles are glued at the same level, and none protrude! Now we cut out circles from thick cardboard for the top and bottom of your ottoman. Again, we carefully fasten everything with adhesive tape, cover it with padding polyester (use a double layer on the sides) and sew it together. Separately, you need to sew a cover from any fabric (you can use unnecessary flaps) and pull it over the pouffe. The final stage is colorful and soft case from yarn. If you do not want to fool around with knitting, sew beautiful case from faux fur or an old knitted sweater.

2. Original decorations

It is not known who was the first to start making jewelry out of plastic, but only the Turkish artist Gulnur Ozdalgar took up this needlework. As a result, for a couple of years, neither she, nor her friends and neighbors have thrown away a single bottle! The talented artist used everything - she made lace vases, earrings, necklaces, pendants, buttons, rings out of them ...

The specifics of the work: a part cut out of plastic is fired over a fire and attached to the product. There is another option - you can cut the bottle into rings (without cutting them), which are then tied or braided with a cloth. Beautiful and colorful bracelets are obtained.

3. Organizers and boxes

Who is engaged in needlework closely, he knows how hard it is to support his workplace in order - threads, needles, beads and accessories strive to constantly crawl, get confused, stick ... More experienced craftswomen create all kinds of organizers for themselves, or use old boxes, vases, baskets, jars and even plastic bottles for storage! To make such a handy plastic thing with your own hands, you only need bottles, scissors, a hole punch and threads. Cut out the walls and lid of the future organizer from plastic (you can create a paper mock-up beforehand so as not to be mistaken with the dimensions of the parts) and pierce them from all sides with a hole punch - where the parts will be sewn together and where you want to put just decorative seams. Now sew. Don't forget the pen!

Sew a zipper between the cover of the organizer and the upper rim - this will make your product as convenient as possible. With these boxes, your favorite patchwork ribbons will always be in their place.

You can make a plastic box in another way - cut off two convex "bottoms" from the bottle and fasten them together with a zipper. In such boxes it is convenient to take breakfast with you - and it does not stain the contents of the bag, and will not be crushed among books and papers.

4. Sculptures

They can be roughly divided into "home-type" sculptures and serious propaganda works by leading designers.

5. Bags

Such unusual bags are made very simply. You need to cut many identical rectangles from plastic bottles of the same color. Then you pierce each piece from all sides with a hole punch and sew together with any decorative seams. Since the bag will be transparent, take care of the inner cover in advance!

6. Flowers

Plastic flowers remind the thinnest glass- how elegant they are. Their details are simply cut out of bottles according to a pattern or without it, and then the edges are lightly burned with fire (they are driven over a lit candle-pill) so that the irregularities are smoothed out and the petal is beautifully curved. Such flowers can be independent products, or they can become a part of jewelry, clothes, bags, photo frames, gift wrapping.

7. Candlesticks

You can use either the bottom or the top of the bottle. The first option: just cut off the convex lower parts, and gently burn the edges and decorate with ribbons or beads. In such candlesticks, it is best to put ordinary “pills”. The second option: connect the two tops of the plastic bottle together with the neck and thread (see photo) and put a long candle inside. Very convenient - wax, flowing down, will accumulate in the upper "cup" and will not stain your tablecloth or table.

You can try to create such a cute “corn” - cut off the bottom of the bottle, stick yellow wrapping paper on its walls (corrugated will pass for natural) and put a candle inside.

8. Dishes

A great find for those who love long hikes! What to do if there are not enough dishes? Or did you just forget it at home? If you have a plastic container with you, the problem is solved. One bottle will make both a plate and a capacious cup! Cut off the bottom - here is a plate for you, cut off up (carefully look at the photo) - a cup with a comfortable handle.

9. Mega creative buttons

Not every girl will like such buttons, but I definitely like them, they have everything - both simplicity and style.

10. Flowerpot with greenery for your pet

A plastic bottle can be a very handy flower pot!

11. Plastic bottle house

Ordinary one and a half liter bottles or “one and a half bottles”, as they are popularly called, can be an excellent material for creating walls! They have already begun to be used all over the world - both cheap and practical, such walls perfectly "breathe" and keep warm. It is enough just to fill the bottle with sand and, pouring the solution, gradually build entire castles!

12. Feeder

Doubly useful - and feed the hungry birds, and get rid of raw materials!

13. Dumbbells

This is what happens when the desire to play sports does not stop even the lack of money to purchase expensive devices.

14. Lampshade

The figured and convex bottom is the most popular part of plastic bottles. For such a curtain, you will have to save up a sufficient amount of them. But the result will please!

15. Scoop

Easy to genius!

And some more photos for inspiration...

Plastic bottles have firmly taken their place in everyone's life as disposable containers and their use is only in the form of containers, but we can get much more benefit without throwing them away. For most people, a bottle is useless, but if you're smart, you can find many ways to make life easier and save money with bottles. Can be made from a plastic bottle almost everything, you need the bottles themselves and a little imagination.

Irrigator for the garden.

One of the simplest ways is useful apply the bottle in the vegetable garden or garden- make her garden sprinkler, to make it nowhere easier. We attach to garden hose plastic container and make several small holes, then tightly fasten the hose with the neck. In this way, we made a watering can for the garden.

Advice.For convenience use square container or secure the round with a heavy object.

Not uncommon, wire charger missing from socket to place where can you put mobile phone, everything can be fixed by making a clumsy holder for your mobile phone. It is necessary to cut the bottle diagonally, take the bottom and cut at the top round hole under the outlet. Now the phone will lie in the bottom with the help of a socket.

Advice.It is better to cut the bottle as close to the top as possible, this will allow you to hold the phone more securely.

You lose every time stationery, you have to look for them, you need to make an easy-to-make stand. In addition, the bottle will need a bolt with a nut. You need to cut off the top and bottom after drilling a hole in the plug and the bottom and connect with a bolt and nut. It will be convenient to use this because it turns out 2 departments. Pens and pencils will fit in the upper section, and paper clips, buttons, graters will fit in the lower section and you won't have to get your pens because of the little things.

Advice.Tighten the bolt with the nut loosely, then the top can scroll.

empty canister with manual it is not necessary to throw it away, it can be useful if you do not need it or it has become unusable, it will turn out scoop. It is necessary to mark the canister with a marker as in the photo and cut it.

Advice.For convenience, make the bow of the scoop square.

Glass jar lamination.

We use glass jars for different purposes and you have to mark them in all ways, but the inscriptions do not stick well on the glass, and the glued pieces of paper quickly become unusable, and laminate no possibility. With the presence of an industrial hair dryer, this problem is solved forever, while the strength of the dishes will increase. If you break it, you won't have to pick up the pieces and cut your hands. Having shown imagination, the jar can be well decorated. It is easy to make, you need one bottle that is suitable in size and color and a piece of paper with an inscription or a picture that we want to attach. However, there is a way to do without an industrial hair dryer.

Method one.

We cut off the top of the bottle and place it on the bottom with the cork up, then put a jar with the inscription on the cork, put on gloves and start heating industrial hair dryer. When the hair dryer heats up, you can begin to gently heat the jar in a circle, without stopping in one place. You need to take a stock, the plastic will settle both in width and in height. When the jar is tightly tightened with plastic, cut off the excess and heat the angular parts again, if all the parts have become even, the jar is ready.

Advice.Start heating the plastic from the bottom, gradually rising.

Method two.

We cut off the top of the bottle and put a jar with a glued inscription on the bottom. To heat the plastic in this case, we need a tall pot of water and kitchen stove. The pan should not be full, otherwise the water will splash onto the stove. When everything is ready and the water boils, we lower the bottle into boiling water and begin to turn it slowly, holding the neck of the glass jar with tongs.

Advice.By holding the jar at an angle, the effect will be achieved faster.

Are you fed up balls of thread, confusing with each other and getting stuck in knots, the way out is simple - from bottles of any size we make a device for holding threads in one place. At the same time, the balls will be less rubbed, confused and stuck. You can make a holder with a mount on a chair or armchair. We cut the bottle closer to the neck, leaving a part that needs to be cut in the form of a rectangle to the bottom, after which we make a hole in the resulting tail according to the size of the cap and put it on.

Advice.The device can be suspended by making holes on opposite edges and threading through them.

With the onset of cold weather, everything turns on in every house possible types heaters and at the same time indoor air becomes dry and we begin to experience discomfort. Headache, skin problems, mucosal irritation and other inconveniences can be avoided by making a silent, simple, convenient and reliable indoor humidifier. For this you will need:

  • adhesive tape
  • Scissors or knife
  • Strip of fabric or string
  • 2 liter bottle
  • gauze fabric

Advice.Pouring into a container essential oils we'll get an air freshener.

Instruction

  1. In the side of the bottle we make a slot of 5 × 10 centimeters, errors are permissible.
  2. We hang the resulting bottle with strips or a cord on a straight upper tube entering the battery with the hole up and tightly fasten it with adhesive tape so that the bottle does not jump out and spin.
  3. We smooth the gauze several times to get a rectangle 10 centimeters wide and a meter long.
  4. We place the middle of the folded fabric in the hole, and wind the ends onto the battery pipe.
  5. Pour water into the resulting container and moisten the wound gauze, this is the maintenance of the device.

Mosquito trap

From a two liter bottle making a mosquito trap. The trap will attract small insects fermentation processes, namely carbon dioxide. For manufacturing you will need:

  • 1 gram baker's yeast
  • two liter bottle
  • dark fabric
  • 50 grams of sugar
  • 200 ml of water with a temperature not exceeding 40 degrees

We start manufacturing by cutting in such a way that the inverted neck fits snugly into the bottle and lacks water. Now, when the container is ready, pour out the sugar, yeast and fill it with forty-degree water, it should not be warmer or hotter. If the liquid is too hot, fermentation will not start due to the death of yeast bacteria. Water should be poured slowly and mix the mixture. Now insert the neck into the bottle in the manner of a funnel. In order for mosquitoes to come across, the trap must be covered with a dense cloth that does not transmit light or paper. Once in such a trap, mosquitoes will not get out. Insects will fall into such a trap for up to a week, after which we will change the mixture.

Advice.After preparing the mixture, put it in a warm place.

Of several one and a half liter bottles we make simple and extremely durable broom. It is convenient to sweep the floor and fleecy surfaces with such a broom. The rigidity of the broom depends on the number of cut pieces.

Manufacturing.

To begin with, we make preparations. We cut off the neck and bottom, dissolve the middle into flaps to the middle, no wider than two centimeters. You will need 4 of these, and leave another top with a neck. Now we put everything together, and cut off the top of the next bottle, put it on what happened and squeeze it. We take a strong wire and thread it through all the bottles along the edges. We put everything on the handle through the cork and fasten it with wire. For reliability, we drive a nail through the neck into the stalk.

Advice.Use copper stranded wire.

If in nature we did not have mugs you can easily make it out of a bottle. First, cut off the top, then cut out a square with a knife or scissors, retreating 2-3 centimeters from the top cut. We cut it evenly and with the expectation that the width of the remaining jumper will be the handle. Turn the top ring inside out and push the bottom through. Now we have a mug that can help us out in nature.

Advice.Without cutting out a large square, you can roll up the middle part and put a cork ring on it.

Create self watering flower pot just cut off the top of the bottle first, then the middle part, so that the top part goes in without touching the bottom. After carefully making a hole in the cork and threading a thread into it. The thread should come out 5 centimeters from both sides of the cork. Now that everything is ready, pour water and insert upper part funnel-like. Now we fall asleep soil, not forgetting to moisten it. The plant will absorb right amount liquid, this will simplify the care of plants.

Advice.Fertilizer can be added to the tank.

Arriving in nature you forgot cutlery nothing to notice them. To save the situation, a bottle, a knife, and a lighter will suffice. Cut out one of the five pieces of the bottom and a bit of the top in one piece after burning the edges with a lighter. You can use this spoon to eat and cook food.

Advice.Rinse the appliance after firing.

Not all refrigerators have vegetable cells and you have to store vegetables in a variety of ways, while the products beat, scratch and roll around the refrigerator. For convenience, use five-liter eggplants. Cut off the top and fill with vegetables or fruits. In this form, the products will not wrinkle and there will be significantly more free space in the refrigerator.

Advice.Store fruits and vegetables in separate containers.

During the cooking process, separate egg white or yolk. But they are not easy to separate, the yolk is very fragile and when it is punctured, it will mix with the protein. With the help of a bottle you can cheat. We split the egg on a plate, squeeze the bottle and bring it to the yolk. Unclenching, we will draw the yolk into it without damaging it. The method is suitable for cooking dishes, the recipe of which includes a lot of eggs, for example, the common French meringue dessert Meringue.

Advice.Rinse the bottle before use.

Fitting © 2022 Design and interior of apartments